greybus: loopback: Fix broken loopback min values

Currently, when a loopback test completely fail,
loopback will return 4294967295 for every min value.
Return 0 instead of 4294967295 in such case.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: greybus_protocols: remove svc-eject timeout define

The SVC eject timeout is implementation specific and does not belong in
the protocol header so move it to the svc module.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: print an error message on failed eject attempts

Print an error message when the SVC fails to eject an interface.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: unexport eject helper

Do no export the interface-eject helper, which is only supposed to be
used by core.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: separate disabling from removal

Separate interface disable from interface removal.

Disabling an interface means tearing down its control connection and
destroying (i.e. deregistering and releasing) its bundles, while
removing it means deregistering and releasing the interface itself.

This is needed to implement controlled module removal, where the module
interfaces are disabled before being physically ejected.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: rename initialisation function

Rename the interface-initialisation function gb_interface_enable(),
which is more descriptive.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: move interface-removal helper

Move helper to remove all interfaces of a host-device to the svc code
and call it when removing the svc device as this needs to be coordinated
with flushing the SVC work queue.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: remove useless spinlock

Remove useless global interface spinlock that appeared to protect the
host-device interface list, but really did not as we are doing lock-less
look-ups by relying on the single-threaded SVC workqueue.

Document the locking assumptions.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: disable control connection on initialisation errors

Disable the control connection immediately on any errors during
interface initialisation as there's no need to keep it around for an
interface in an error state.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: always register interfaces at hotplug

Always register interfaces at hotplug regardless of whether
initialisation succeeded or not.

Even if a module failed to initialise we want it to have a
representation while it is physically present.

Note that the vendor and product-string attribute will read as "(null)"
for now on an interface that failed (early) initialisation.

Also note that the switch route is kept until the interface is finally
removed also on initialisation errors.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: free bundles on initialisation errors

Immediately free any created bundle structures on interface
initialisation errors.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: separate initialisation and registration

Separate interface initialisation from registration of the interface and
its bundles.

This is a step towards registering also interfaces that failed to
initialise (e.g. a dummy interface).

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: refactor interface-route destruction

Add interface-route-destroy helper to tear down the route and release
the interface device id.

Note that we currently need to grab a reference to the interface to
prevent it from being deallocated before tearing down the route.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: refactor interface-route creation

Add interface-route-create helper to allocate an interface device id and
setup the route.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: add comment about early control-connection disable

Add comment about why the control connection is disabled early when the
interface is already gone.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: remove unused drvdata helpers

Remove the unused interface drvdata helpers along with some dubious
comments about public and private definitions.

Greybus drivers bind to bundles and should be using the
greybus_set_drvdata and greybus_get_drvdata helpers.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: remove unused function prototype

Remove unused gb_interface_destroy() prototype.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Fix broken synchonous test

loopback driver use the send_count variable to know the test progress.
The test may be stopped or change but this variable is never cleaned.
Such situation may break the next run.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: round closest the sixth decimal

The original round was removed becaused it was rounding
the integer whereas we had decimals.
Round the sixth decimal.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Fix warning on 32-bit build

gb_loopback_ro_avg_attr() is using "/" to divide two 64-bit integer,
causing a reference to __aeabi_uldivmod() that is not availalbe on 32-bit.
Instead, use do_div().

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: greybus_manifest: remove unused SVC class

Mark the SVC Bundle-class id as unused.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: greybus_manifest: remove unused AP class and protocol

Mark the AP Bundle-class and protocol ids as unused.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback_test: Use timeout argument

Patch "c3b0a32 Loopback_test: use poll instead of inotify"
added a optional argument for the user to specify a timeout value,
but did not use this parameter in the actual poll function. The
default of 30 seconds is always used.

Fix this by actually using the the poll_timeout parameter so the user
can run long tests.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: fix incorrect gpio variable type

GPIO number obtained from of_get_named_gpio() should be signed to allow
error handling.

Testing Done:
Built & booted on EVT1.5

Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: properly annotate struct gb_control_timesync_enable_request

A patch from created struct gb_control_timesync_enable_request,
but forgot to properly annotate that the fields are little-endian.  The
code is correct in treating them this way, so there isn't a bug, but
sparse complains.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: disable E2EFC on CSI connection

Following Toshiba's recommendation we shouldn't use E2EFC on a CSI connection.
Disable E2EFC on the CSI connection.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hd: rename CPort-features callbacks

Rename the CPort-features callbacks, that are not just used to enable
FCT flow, to the more descriptive cport_features_enable/disable.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add CSD connection flag

Add CSD connection flag that can be specified when allocating a
connection to enable Controlled Segment Dropping in favour of E2EFC
which is enabled by default.

Note that most connections are expected to have E2EFC enabled.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: generalise CPortFlags handling

Generalise the svc connection-create helper to accept a cport-flags
argument and handle the flags in the connection code instead.

Note that the camera driver currently manages its data connection
directly. We keep E2EFC enabled for now even though it will soon need
to be disabled due to some pending firmware updates.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: clean up CPortFlags handling

Clean up CPortFlags handling and explicitly disable CSD when E2EFC is
enabled (CSD_n is ignored when E2EFC is set).

Note that the bootrom requires E2EFC, CSD, and CSV to all be disabled.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add connection-flag interface

Add interface for associating a flag bitmask with a connection when
creating it.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: control: Add TimeSync control commands

Simple addition of the TimeSync commands defined in the specification.
Note for the case of timesync_authoritative we're passing the request
structure directly so as not to have to pass eight parameters into the
function.

Adds:
- control.c::timesync_enable(u8 count, u64 frame_time,
                             u32 strobe_delay, u32 refclk)
  Informs an Interface to expect count TimeSync strobe pulses with
  strobe_delay milliseconds delay between each strobe. Once enabled
  an Interface may not enter a low-power mode which will result in the
  reference timer used to track time switching off.

- control.c::timesync_disable(void)
  Commands an Interface to immediately halt TimeSync logic. This will allow
  an Interface to transition into low-power modes where the reference time
  being used for TimeSync may switch off.

- control.c::timesync_authoritative(u64 *frame_time, u8 count)
  Used by the AP Module to inform an Interface of the authoritative
  TimeSync clock-master time at each strobe pulse. Down-stream clock slaves
  shall adjust their local frame-time appropriately based on the
  diseminated authoritative frame-time.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: timesync: Add Control and SVC protocol TimeSync operation definitions

This patch adds the protocol command extenions for SVC and Control
protocols to the greybus_protocols definition header consistent with
the greybus-spec.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: timesync: Add Control and SVC TimeSync command/response data definitions

This patch adds the protocol command/response definitions for the SVC and
Control protocols to the greybus_protocols definition header consistent
with the greybus-spec.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: manifest: reserve the Bridged PHY class

This reserves the bridged phy class number to be used later on.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>

greybus: gpbridge.h: move protocol init/exit prototypes

Create gpbridge.h for the gpbridge-specific function prototypes, the
rest of the greybus drivers don't care about them.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>

greybus: remove gb_i2c_retries_operation

Set retries operation was removed from the Greybus specification. Remove
gb_i2c_retries_operation and all other no longer necessary code bits from the
Greybus kernel code.

Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: remove gb_i2c_timeout_operation

Set timeout operation was removed from the Greybus specification. Remove
gb_i2c_timeout_operation and all other no longer necessary code bits from the
Greybus kernel code.

Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: raw: use hexadecimal notation for request types

Use hexadecimal notation for request types in log messages.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: fix double error count

Make sure not count errors during asynchronous tests twice (first in
the timeout handler then again in the completion handler) to avoid
obviously broken error stats such as:

$ loopback_test -i 1000 -t transfer -p -o 200000 -c 64 -x -s 2000

1970-1-1 1:3:35
 test:                  transfer
 path:                  gb_loopback0
 size:                  2000
 iterations:            1000
 errors:                1998
 async:                 Enabled
 requests per-sec:      min=0, max=0, average=0.310556, jitter=0
 ap-throughput B/s:     min=0 max=4026 average=1254.647461 jitter=4026
 ap-latency usec:       min=12803 max=12803 average=12803.000000 jitter=0
 apbridge-latency usec: min=89 max=89 average=89.000000 jitter=0
 gpbridge-latency usec: min=294 max=294 average=294.000000 jitter=0

where we supposedly have more errors than iterations (operations
initiated).

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: Split start and stop APBridgeA requests

Provide finer-grained control of the audio streaming on APB1 by
splitting the transmit/receive start and stop requests into prepare,
start, stop, and shutdown.

CC: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Loopback_test: use poll instead of inotify

Inotify does not handle sysfs events, so use poll instead.

The loopback kernel driver will send a notification when the test is
complete. So, open a poll file descriptor for every enabled device,
and after starting the test, wait for an event from each device.
After all events are received, read the total number of iterations
and make sure the test is complete.

Also, add missing stdint header which was included in inotify.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Notify user space only when the test finished.

Currently, user space is notified for every message sent,
but this is not really needed and does not work in the async case
where all messages are sent from the start.

Instead, notify userspace only when all the transfers are complete.
This allows userspace to wait in a poll loop and wakeup only when
the test is finished.

Also, don't use the bundle kobj to send the notification it is
the loopback device that contains the loopback attributes.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hid: Replace WARN_ON() with dev_err()

WARN_ON() is a bit harsh here, as we just failed to power-off the HID
device while it is getting removed.

Replace it with dev_err().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hid: Don't disable connection-tx before destroying hid-device

hid_destroy_device() can potentially call callbacks defined in struct
hid_ll_driver, which may initiate few greybus operations.

And so connection (tx) should be kept enabled until the hid-device isn't
destroyed.

Reported-by: Jiss Kuruvila <jkuruvila@google.com>
Reported-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: Register CPorts for specific directions

Currently, it is assumed that all audio data CPorts registered on
APB1 are used for transmitting audio data.  That may not always be
true like when a microphone is connected but no speakers.  Also,
the current special protocol lacks a way to tell APB1 whether the CPort
being registered is for transmitting, receiving, or both.

Fix by adding a 'direction' field to the register and unregister CPort
requests and define bits indicating which direction (or both) audio
data will go on that CPort.

Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: expose full 32 bits of vid/pid to userspace

Now that userspace is ready for all 32 bits of the vid/pid, take off our
mask and send the full values.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Fix averaging

Currently, we are adding 0.5 to the average to round the average.
But we are using the remainder to calculate the decimal, so we do not
need to round the average.
In addition, use a u64 type for the remainder to avoid overflow
that might happen when stats->sum value is too big,
usually for requests per seconds and the throughput.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Fix throughput calculations

Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
In addition, update every seconds the min and the max
for throughput and requests per second.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Fix incoherency in calculations in the case of error

Currently, in case the case of error, statistics are updated for
asynchronous but not for an asynchronous operation.
Do not update the statistics in the case of error.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Fix calculations error for ping transfers

For the async ping transfer, statistics are counted twice,
once after the after the gb_loopback_async_operation() and
once in the callback.
Only keep the one in the callback.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: lights: remove unnecessary check

lights can never be NULL at that point since lights_count must be different than
zero, and we need only to validate the light_id.

Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Disable HUB3613 only in APB poweroff fn

HUB3613 configuration, either disable (Standby mode) or enable (HUB mode)
is related to APB. So it makes perfect sense to put both of them
together in one function.

HUB3613 enable happens only at one place, in hub_conf_delayed_work() fn,
but disable is initiated from multiple places.
Move all calls to usb3613_hub_mode_ctrl(false) to apb_poweroff().

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Make sure APB power cycles on coldboot

On first wake/detect pulse, everything works fine, as APB would be
in poweroff state initially.
But on subsequent wake/detect pulses, where APB is already in active
state, internal function just returns doing nothing, as it finds that
device is already in active state.

So the solution would be to make sure that, whenever execution reaches
to coldboot, make sure we power cycle it. Power off first, before
powering on.

Interrupt handler takes care of ignoring < 30msec pulses, so we should
be safe here to power cycle APB.

Testing Done: Testd on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: operation: add support for short responses

Add support for operations with short responses.

So far we have assumed that the initiator of an operation always knows
the exact size of the expected response. This is however not always the
case and we've worked around this limitation in a couple of places by,
for example, first requesting the size of a resource before fetching the
actual data.

To avoid such workarounds and simplify our protocols, add a
short-response flag that can be set when allocating an operation. When
this flag is set on an operation, core will accept a response that is
shorter than the size of the (pre-allocated) response payload buffer.

For now, we update the response-message payload_size field to reflect
the actual length of the response received.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: operation: add temporary pointer to response handler

As a preparatory clean up, add a temporary variable to point to the
response message header.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Disable wake/detect interrupt in poweroff

In poweroff() fn, we are shutting down SVC, so disable interrupt
as well.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Set direction of wake/detect gpio in poweroff fn

With support of interrupt based mechanism, gpio is not longer set to
output mode, so gpio_set_value won't work. So use
gpio_direction_output() fn in poweroff(), while setting value on
wake/detect line.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Assert wake/detect after SVC reset without delay

Since now driver supports interrupt based mechanism to read events
from SVC over wake/detect line, no need to delay wake/detect assertion.
We can assert wake/detect after SVC reset deassertion, so during boot
itself SVC will start sending wake_out pulses.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Enable interrupt support on wake/detect line

This patch enabled interrupt support on events received over wake/detect
line. The driver follows below state machine,

Default: wake/detect line is high (WD_STATE_IDLE)
On Falling edge:
  SVC initiates boot (either cold/standby).
  On ES3, > 30msec = coldboot, else standby boot.
  Driver moves to WD_STATE_BOOT_INIT
On rising edge (> 30msec):
  SVC expects APB to coldboot
  Driver wakes irq thread which kicks off APB  coldboot
  (WD_STATE_COLDBOOT_TRIG)
On rising edge (< 30msec):
  Driver ignores it, do nothing.

After coldboot of APB, HUB configuration work is scheduled after 2 sec,
allowing enough time for APB<->SVC/Switch to linkup (in multiple
iterations)

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Add wake detect state based on functionality

If driver needs to process wake/detect events from SVC, by enabling
interrupt support on wake/detect event, it becomes easier to maintain
state of wake/detect line based on functionality.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Convert delayed work to do only hub3613 configuration

This is preparation of interrupt handling support, where APB coldboot
and wake/detect handling will be handled as response to wake/detect
interrupt.
Due to slower I2C write operations in HUB configuration, it is important
to separate HUB configuration, and probably delay it after APB is
cold booted.

Note that delayed work will be scheduled from interrupt handler,
in following patches.

To satisfy build (and bisect), remove apb_cold_boot() fn, which will be
added back in the patch where it gets used again.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-apb-ctrl: Remove extra delay in APB reset

With synchronization between SVC <=> AP over wake/detect line to
bring APB's out of reset, we do not need any extra delays now.
So remove it.

Testing Done: Tested for DB3.5 and EVT1.2 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Documentation/sysfs: make 1-5 a 2x2 module

Make example module 1-5 a 2x2 module by adding a second, dummy
interface.

This is both an example of how a 2x2 module would be represented and
also suggests what a dummy interface may look like.

A 2x2 module has two child interface devices and a num_interfaces value
of two.

In this example, the secondary interface 1-5.6, is a dummy interface and
therefore lacks the normal identifying attributes (e.g. UniPro DDBL1 and
Ara ids). We may eventually add an interface_type attribute to
facilitate distinguishing various interface types (there may be more
than two).

In the following tree, the bundle attributes and child devices have been
left out:

greybus1/
├── 1-2
│   ├── 1-2.2
│   │   ├── 1-2.2.1
│   │   ├── 1-2.2.2
│   │   ├── ddbl1_manufacturer_id
│   │   ├── ddbl1_product_id
│   │   ├── interface_id
│   │   ├── product_id
│   │   ├── serial_number
│   │   ├── unique_id
│   │   └── vendor_id
│   ├── eject
│   ├── module_id
│   └── num_interfaces
├── 1-5
│   ├── 1-5.5
│   │   ├── 1-5.5.2
│   │   ├── ddbl1_manufacturer_id
│   │   ├── ddbl1_product_id
│   │   ├── interface_id
│   │   ├── product_id
│   │   ├── serial_number
│   │   ├── unique_id
│   │   └── vendor_id
│   ├── 1-5.6
│   │   └── interface_id
│   ├── eject
│   ├── module_id
│   └── num_interfaces
└── 1-svc

In this example there are two modules: 1-2 is a 1x2 module with one
interface, and 1-5 is a 2x2 module with two interfaces of which the
second (1-5.6) is a dummy interface.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Documentation/sysfs: move module 1-4 to position 5

Move example module 1-4 to position 5, effectively renaming it 1-5.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Documentation/sysfs: add module devices

Introduce module devices and rename interface and bundle devices.

Greybus module devices correspond to physical modules and have one or
more interfaces. Modules have an id that is identical to the id of their
primary interface, which in turn is the interface with lowest numbered
id. The module name is constructed from the bus and module id:

<bus_id>-<module_id>

Interfaces and bundles are consequently renamed as

<bus_id>-<module_id>.<interface_id>

and

<bus_id>-<module_id>.<interface_id>.<bundle_id>

respectively.

As before, interface ids (and therefore in a sense now also module ids)
correspond to physical interface positions on the frame.

Modules have the following attributes:

eject
module_id
num_interfaces

where module_id is the id of the module and num_interface the number of
interfaces the module has.

Note that the interface ids of a module's interfaces are expected to be
<module_id>, <module_id + 1>, ..., <module_id + num_interfaces - 1>.

Writing a non-zero argument to eject cleanly shuts down and unregisters
all of the module interfaces before ejecting the module.

The example sysfs tree now looks as follows with the second bus
(APBridgeA) left out:

greybus1/
├── 1-2
│   ├── 1-2.2
│   │   ├── 1-2.2.1
│   │   │   ├── bundle_class
│   │   │   ├── bundle_id
│   │   │   └── state
│   │   ├── 1-2.2.2
│   │   │   ├── bundle_class
│   │   │   ├── bundle_id
│   │   │   └── state
│   │   ├── ddbl1_manufacturer_id
│   │   ├── ddbl1_product_id
│   │   ├── interface_id
│   │   ├── product_id
│   │   ├── serial_number
│   │   ├── unique_id
│   │   └── vendor_id
│   ├── eject
│   ├── module_id
│   └── num_interfaces
├── 1-4
│   ├── 1-4.4
│   │   ├── 1-4.4.2
│   │   │   ├── bundle_class
│   │   │   ├── bundle_id
│   │   │   ├── gpbridge0
│   │   │   │   ├── gpio
│   │   │   │   │   └── gpiochip490
│   │   │   │   └── i2c-4
│   │   │   └── state
│   │   ├── ddbl1_manufacturer_id
│   │   ├── ddbl1_product_id
│   │   ├── interface_id
│   │   ├── product_id
│   │   ├── serial_number
│   │   ├── unique_id
│   │   └── vendor_id
│   ├── eject
│   ├── module_id
│   └── num_interfaces
└── 1-svc
    ├── ap_intf_id
    ├── eject
    └── endo_id

where greybus1 is a bus; 1-svc the svc; 1-2, and 1-4 are modules; 1-2.2
and 1-4.4 are (primary) interfaces; and 1-2.2.1, 1-2.2.2, and 1-4.4.2
are bundles.

Note that the svc eject attribute may eventually be renamed force_eject.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: gpio: handle api changes for 4.5 kernel release

In kernel version 4.5, struct gpio_chip renamed the field 'dev' to
'parent' so handle this properly.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: gpio: use bundle device for error messages

Use the bundle device directly in gpio error messages instead of the
gpio device, as they are the same pointer.  This will make future gpio
api changes much easier to handle.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Fix exit path in probe fn

If SVC coldboot fails or if of_platform_populate() fn fails,
then state of device needs to be reverted.

Importantly, if of_platform_populate() fails, then poweroff the SVC.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: fix incomplete receive-data sanity checks

Fix incomplete receive-data sanity checks.

The payload size was never verified before parsing the uart header and
neither was the uart-header data size verified against the actual
payload size, something which could lead to information leaks when
passing data beyond the payload buffer to the tty layer.

Also remove the incorrect check against the maximum (tx-buffer) payload
size.

Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: add missing serial-state sanity check

Add dedicated serial-state request handler and add the missing sanity
check on the incoming request.

Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: add max-payload sanity check

Let's be well behaved and add a sanity check on the maximum greybus
payload size to avoid underflow on the calculated buffer size.

Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: {en,dis}able fct flow in connection management

The AP must enable the FCT flow of APBA once it has received the response
from the AP that the connection between APBA and a module has been setted up.
Disable the flow of FCT tokens when destroying connections.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: es2: implement the fct flow control requests

Implement the control requests enabling/disabling the flow of FCT on APBA.

Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: apba: add fct flow usb control requests

Add control requests to enable/disable the flow of unipro FCT tokens

Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add api to {en,dis}able unipro fct flow

In order to support mailbox-free control cport init on the bridges the AP must
be able to enable/disable the flow of unipro fct tokens. Add a new API that
will enable or disable on APBA the flow of fct tokens.

Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-apb-ctrl: Return immediately if in same state from state change fns

Have a check inside all individual operational state change functions
to check whether device is in same state, and if yes, then return
immediately.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Avoid doing same thing again in poweroff fn

If user switches from fw_flashing => off mode, then we do not need
to do same things again, for example, clk_disable and wake/detect event,
as while switching to fw_flashing, driver makes sure that device goes
to off state and then brings back in fw_flashing state.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Return immediately if in same state from state change fns

Have a check inside all individual operational state change functions
to check whether device is in same state, and if yes, then return
immediately.

Testing Done: Tested on DB3.5 platform

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Rename clock_mode to flags

Rename the 'clock_mode' parameter to a more generic 'flags' in the csi
bus configuration structure.
Define flags value for continuous clock mode.

Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Add CSI configuration parameters

Add CSI configuration parameters to the configure_stream operation
response.
Currently, only the total number of lines in a second is used to configure the
the AP-Bridge CSI transmitter, all other parameters (number of CSI data
lanes, and CSI bus clock frequency) are kept hard-coded for two reasons:
1) We need to configure the CSI receiver on AP side accordingly to these
settings, before sending them to APB1 CSI transmitter.
2) We cannot use the camera module provided parameters as-is, but use
those information to compute the required bandwidth on the CSI bus, and
configure the # of CSI data lanes, and the CSI bus clock speed in a way that
satisfies that bandwidth requirement.

Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: properly calculate max buffer size

We forgot to count the size of the uart send data message header when
calculating the maximum size of the buffer that the uart driver could
send in one chunk.

This fixes the math and makes the variable a size_t to match the return
value of the call to gb_operation_get_payload_size_max();

Reported-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Documentation: remove svc unique_id attribute

Remove unimplemented svc unique_id attribute from the documentation.

This attribute made more sense when we thought we'd have an AP-module,
unlike now when the AP and SVC are both part of the same frame.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: Add print messages on interface initialization/removal

It might be of interest (to developers at least) to know when an
interface is getting created or removed from the system.

Interface creation message can further contain basic information about
the interface, like its vid/pid and mfg/prod ids.

Now, the interface is created by gb_interface_create(), which doesn't
register the intf->dev to the kernel and so the print message is rather
added to gb_interface_init() where we register the device with the
kernel.

A similar message is added to gb_interface_remove() only when the
interface was earlier initialized.

And this is how the output looks on real insertion/removal of the
module:

greybus 1-1: Interface added: VID=0x00000001, PID=0x00000001
greybus 1-1: DDBL1 Manufacturer=0x00000001, Product=0x00000001
...
greybus 1-1: Interface removed

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Revert "gb_loopback: Fix throughput calculations"

This reverts commit 9b9b046af237f5674c2f7ca991dc62332b2d4041

Bryan wants more feedback first.

Reported-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: return success for stop trigger if device removed

In case GB codec module is already removed, no action is required
at the HW level. Thus, report SUCCESS to above layer.

Reporting error to above layer will cause repeated trials and won't
allow to update DPCM connections.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: schedule workqueue to perform codec cleanup on module removal

In response to codec module removal, user space is reported about
the event. In response to this, ALSA layer will update DAPM route
and cleanup DAPM states.
As a fallback mechanism, kernel can cleanup the DAPM state for codec
module. But, this would cause immediate playback (first trial) to fail,
since DSP is still in inconsistent state.
To avoid such situation, a workqueue is scheduled for codec cleanup
with timeout=50ms.
Thus, normally it is expected from above layers to update routes and
perform cleanup. However, fallback mechanism still holds good after
50ms.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: Enable support for multiple codec modules

Update params, sequence in response to changes in msm8994
helper APIs

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: lights: fix check for configured lights

The validation for a complete configured light is wrong and it is
reworked to make sure that only when the light is ready, will handle
request events.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: lights: remove has_flash on failure

If register to v4l2 fails just mark the light as not having flash so in
release we do not try to unregister.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: lights: remove unnecessary checks

We do not need to check for channels and lights as they can never be
NULL as a big memory array elements.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: gb_loopback: Fix throughput calculations

Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: es2: fix cport-count error handling

Make sure to check for short transfers when retrieving the bridge cport
count.

Also clear the request buffer when allocating it.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Add reserved fields to transfer request

All loopback transfer operations should have an identical header
format in order to facilitate bandwidth and data movement analysis.

Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-apb-ctrl: Do not coldboot APBs in probe

Since parent driver (SVC) is controlling APBs directly, we do not
need to bringup APBs in its own probe.

Testing Done: Tested on EVT1.2.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: manifest: Parse cports (within a bundle) in the order from manifest blob

The order in which cports (of a bundle) are present in the manifest blob
is important for gbsim, as it allocates hd_cport_id's for them
sequentially.

For example, if there are two cports (1 and 2, in order 1->2) present in
a bundle in the manifest blob, then gbsim allocates hd_cport_id X and
X+1 for them. This is done on the assumption that kernel will do the
same. Though it shouldn't have had any such assumptions since the
beginning.

But with a recent patch that sequence is changed, and it broke the
assumption gbsim had.

While parsing the manifest blob, the cports within a bundle are now
moved to another list using list_move() and then they are picked one by
one from the HEAD of the list.

list_move() first deletes the node and then adds it to HEAD as it uses
list_add() and not list_add_tail(). And that reverses the order in which
the cports were present in the original list.

And because of this, the messages destined for cport 1 are delivered to
cport 2 and the ones for cport 2 are delivered to cport 1.

In order to get gbsim working with greybus, keep the cport list in the
order in which they were present in manifest, by replacing list_move()
with list_move_tail().

Its a trivial patch and shouldn't have any side effects on the working
of greybus with nuttx.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Don't configure CSI TX in test only mode

When the GB_CAMERA_CONFIGURE_STREAMS_TEST_ONLY flag is set by the caller
the configure streams operation should only test the requested settings
without modifying the hardware state. This applies for both the module,
the UniPro links power modes and the AP bridge settings. Return early
when the flag is set to avoid modifying the AP bridge CSI TX settings.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Set power mode after configuring streams

There's no need to set the power mode before configuring streams, doing
it after simplifies code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Clean up when AP link power mode configuration failed

Restore the module link power mode to the previous state in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Factorize link power mode configuration code into a function

Avoid duplicating the same code block multiple times.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>