GitHub/MotorolaMobilityLLC/kernel-slsi.git
12 years agoPM / Domains: Add device domain data reference counter
Rafael J. Wysocki [Thu, 5 Jul 2012 20:12:32 +0000 (22:12 +0200)]
PM / Domains: Add device domain data reference counter

Add a mechanism for counting references to the
struct generic_pm_domain_data object pointed to by
dev->power.subsys_data->domain_data if the device in question
belongs to a generic PM domain.

This change is necessary for a subsequent patch making it possible to
allocate that object from within pm_genpd_add_callbacks(), so that
drivers can attach their PM domain device callbacks to devices before
those devices are added to PM domains.

This patch has been tested on the SH7372 Mackerel board.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoPM / Domains: Add preliminary support for cpuidle, v2
Rafael J. Wysocki [Tue, 3 Jul 2012 17:07:42 +0000 (19:07 +0200)]
PM / Domains: Add preliminary support for cpuidle, v2

On some systems there are CPU cores located in the same power
domains as I/O devices.  Then, power can only be removed from the
domain if all I/O devices in it are not in use and the CPU core
is idle.  Add preliminary support for that to the generic PM domains
framework.

First, the platform is expected to provide a cpuidle driver with one
extra state designated for use with the generic PM domains code.
This state should be initially disabled and its exit_latency value
should be set to whatever time is needed to bring up the CPU core
itself after restoring power to it, not including the domain's
power on latency.  Its .enter() callback should point to a procedure
that will remove power from the domain containing the CPU core at
the end of the CPU power transition.

The remaining characteristics of the extra cpuidle state, referred to
as the "domain" cpuidle state below, (e.g. power usage, target
residency) should be populated in accordance with the properties of
the hardware.

Next, the platform should execute genpd_attach_cpuidle() on the PM
domain containing the CPU core.  That will cause the generic PM
domains framework to treat that domain in a special way such that:

 * When all devices in the domain have been suspended and it is about
   to be turned off, the states of the devices will be saved, but
   power will not be removed from the domain.  Instead, the "domain"
   cpuidle state will be enabled so that power can be removed from
   the domain when the CPU core is idle and the state has been chosen
   as the target by the cpuidle governor.

 * When the first I/O device in the domain is resumed and
   __pm_genpd_poweron(() is called for the first time after
   power has been removed from the domain, the "domain" cpuidle
   state will be disabled to avoid subsequent surprise power removals
   via cpuidle.

The effective exit_latency value of the "domain" cpuidle state
depends on the time needed to bring up the CPU core itself after
restoring power to it as well as on the power on latency of the
domain containing the CPU core.  Thus the "domain" cpuidle state's
exit_latency has to be recomputed every time the domain's power on
latency is updated, which may happen every time power is restored
to the domain, if the measured power on latency is greater than
the latency stored in the corresponding generic_pm_domain structure.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Kevin Hilman <khilman@ti.com>
12 years agoMerge branch 'pm-cpuidle' into pm-domains
Rafael J. Wysocki [Tue, 3 Jul 2012 17:07:21 +0000 (19:07 +0200)]
Merge branch 'pm-cpuidle' into pm-domains

* pm-cpuidle:
  PM / cpuidle: Add driver reference counter
  cpuidle: move field disable from per-driver to per-cpu

12 years agoPM / cpuidle: Add driver reference counter
Rafael J. Wysocki [Sat, 16 Jun 2012 13:20:11 +0000 (15:20 +0200)]
PM / cpuidle: Add driver reference counter

Add a reference counter for the cpuidle driver, so that it can't
be unregistered when it is in use.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agocpuidle: move field disable from per-driver to per-cpu
ShuoX Liu [Tue, 3 Jul 2012 17:05:31 +0000 (19:05 +0200)]
cpuidle: move field disable from per-driver to per-cpu

Andrew J.Schorr raises a question.  When he changes the disable setting on
a single CPU, it affects all the other CPUs.  Basically, currently, the
disable field is per-driver instead of per-cpu.  All the C states of the
same driver are shared by all CPU in the same machine.

The patch changes the `disable' field to per-cpu, so we could set this
separately for each cpu.

Signed-off-by: ShuoX Liu <shuox.liu@intel.com>
Reported-by: Andrew J.Schorr <aschorr@telemetry-investments.com>
Reviewed-by: Yanmin Zhang <yanmin_zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoPM / Domains: Do not stop devices after restoring their states
Rafael J. Wysocki [Fri, 15 Jun 2012 22:02:34 +0000 (00:02 +0200)]
PM / Domains: Do not stop devices after restoring their states

While resuming a device belonging to a PM domain,
pm_genpd_runtime_resume() calls __pm_genpd_restore_device() to
restore its state, if necessary.  The latter starts the device,
using genpd_start_dev(), restores its state, using
genpd_restore_dev(), and then stops it, using genpd_stop_dev().
However, this last operation is not necessary, because the
device is supposed to be operational after pm_genpd_runtime_resume()
has returned and because of it pm_genpd_runtime_resume() has to
call genpd_start_dev() once again for the "restored" device, which
is inefficient.

To make things more efficient, remove the call to genpd_stop_dev()
from __pm_genpd_restore_device() and the direct call to
genpd_start_dev() from pm_genpd_runtime_resume().  [Of course,
genpd_start_dev() still has to be called by it for devices with the
power.irq_safe flag set, because __pm_genpd_restore_device() is not
executed for them.]

This change has been tested on the SH7372 Mackerel board.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoPM / Domains: Use subsystem runtime suspend/resume callbacks by default
Rafael J. Wysocki [Fri, 15 Jun 2012 22:02:22 +0000 (00:02 +0200)]
PM / Domains: Use subsystem runtime suspend/resume callbacks by default

Currently, the default "save state" and "restore state" routines
for generic PM domains, pm_genpd_default_save_state() and
pm_genpd_default_restore_state(), respectively, only use runtime PM
callbacks provided by device drivers, but in general those callbacks
need not provide the entire necessary functionality.  Namely, in
general it may be necessary to execute subsystem (i.e. device type,
device class or bus type) callbacks that will carry out all of the
necessary operations.

For this reason, modify pm_genpd_default_save_state() and
pm_genpd_default_restore_state() to execute subsystem callbacks,
if they are provided, and fall back to driver callbacks otherwise.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoLinux 3.5-rc5
Linus Torvalds [Sat, 30 Jun 2012 23:08:57 +0000 (16:08 -0700)]
Linux 3.5-rc5

12 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sat, 30 Jun 2012 23:01:50 +0000 (16:01 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another batch of fixes.

  All are small, contained, targeted fixes for explicit problems --
  mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and
  Samsung."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx6q: fix suspend regression caused by common clk migration
  ARM: OMAP4470: Fix OMAP4470 boot failure
  ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry
  ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
  ARM: shmobile: r8a7779: Route all interrupts to ARM
  ARM: shmobile: kzm9d: use late init machine hook
  ARM: shmobile: kzm9g: use late init machine hook
  ARM: mach-shmobile: armadillo800eva: Use late init machine hook
  ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping
  ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel
  ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled
  ARM: shmobile: sh7372: bugfix: chclr_offset base
  ARM: shmobile: sh73a0: bugfix: SY-DMAC number
  ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL

12 years agoprintk.c: fix kernel-doc warnings
Randy Dunlap [Sat, 30 Jun 2012 22:37:24 +0000 (15:37 -0700)]
printk.c: fix kernel-doc warnings

Fix kernel-doc warnings in printk.c: use correct parameter name.

  Warning(kernel/printk.c:2429): No description found for parameter 'buf'
  Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agolinux/irq.h: fix kernel-doc warning
Randy Dunlap [Sat, 30 Jun 2012 22:30:46 +0000 (15:30 -0700)]
linux/irq.h: fix kernel-doc warning

Fix kernel-doc warning.  This struct member was removed in commit
875682648b89 ("irq: Remove irq_chip->release()") so remove its
associated kernel-doc entry also.

  Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Sat, 30 Jun 2012 22:27:52 +0000 (15:27 -0700)]
Merge branch 'v3.5-samsung-fixes-1' of git://git./linux/kernel/git/kgene/linux-samsung into fixes

* 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry
  ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping
  ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL

12 years agoARM: imx6q: fix suspend regression caused by common clk migration
Shawn Guo [Tue, 5 Jun 2012 07:16:43 +0000 (15:16 +0800)]
ARM: imx6q: fix suspend regression caused by common clk migration

When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi
get different on/off states than old clk driver, which breaks suspend
function.  There might be a better way to manage these clocks, but let's
takes the old clk driver approach to fix the regression first.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agoMerge tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Sat, 30 Jun 2012 22:21:00 +0000 (15:21 -0700)]
Merge tag 'omap-fixes-for-v3.5-rc4' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
"Here's one more regression fix that I missed earlier, and a
 trivial fix to get omap4470 booting."

* tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4470: Fix OMAP4470 boot failure
  ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Sat, 30 Jun 2012 18:11:58 +0000 (11:11 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

Pull ACPI & Power Management patches from Len Brown.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  acpi_pad: fix power_saving thread deadlock
  ACPI video: Still use ACPI backlight control if _DOS doesn't exist
  ACPI, APEI, Avoid too much error reporting in runtime
  ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding
  ACPI: Remove one board specific WARN when ignoring timer overriding
  ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases
  ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI
  ACPI sysfs.c strlen fix

12 years agoMerge tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 30 Jun 2012 17:11:24 +0000 (10:11 -0700)]
Merge tag 'driver-core-3.5-rc5' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver Core fixes from Greg Kroah-Hartman:
 "Here is a number of printk() fixes, specifically a few reported by the
  crazy blog program that ships in SUSE releases (that's "boot log" and
  not "web log", it predates the general "blog" terminology by many
  years), and the restoration of the continuation line functionality
  reported by Stephen and others.  Yes, the changes seem a bit big this
  late in the cycle, but I've been beating on them for a while now, and
  Stephen has even optimized it a bit, so all looks good to me.

  The other change in here is a Documentation update for the stable
  kernel rules describing how some distro patches should be backported,
  to hopefully drive a bit more response from the distros to the stable
  kernel releases.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  printk: Optimize if statement logic where newline exists
  printk: flush continuation lines immediately to console
  syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ
  Revert "printk: return -EINVAL if the message len is bigger than the buf size"
  printk: fix regression in SYSLOG_ACTION_CLEAR
  stable: Allow merging of backports for serious user-visible performance issues

12 years agoMerge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', 'video-bugzilla...
Len Brown [Sat, 30 Jun 2012 04:53:50 +0000 (00:53 -0400)]
Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', 'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release

bug fixes

12 years agoacpi_pad: fix power_saving thread deadlock
Stuart Hayes [Wed, 13 Jun 2012 21:10:45 +0000 (16:10 -0500)]
acpi_pad: fix power_saving thread deadlock

The acpi_pad driver can get stuck in destroy_power_saving_task()
waiting for kthread_stop() to stop a power_saving thread.  The problem
is that the isolated_cpus_lock mutex is owned when
destroy_power_saving_task() calls kthread_stop(), which waits for a
power_saving thread to end, and the power_saving thread tries to
acquire the isolated_cpus_lock when it calls round_robin_cpu().  This
patch fixes the issue by making round_robin_cpu() use its own mutex.

https://bugzilla.kernel.org/show_bug.cgi?id=42981

Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agoACPI video: Still use ACPI backlight control if _DOS doesn't exist
Zhang Rui [Wed, 20 Jun 2012 01:48:43 +0000 (09:48 +0800)]
ACPI video: Still use ACPI backlight control if _DOS doesn't exist

This fixes a regression in 3.4-rc1 caused by commit
ea9f8856bd6d4ed45885b06a338f7362cd6c60e5
(ACPI video: Harden video bus adding.)

Some platforms don't have _DOS control method, but the ACPI
backlight still works.
We should not invoke _DOS for these platforms.

https://bugzilla.kernel.org/show_bug.cgi?id=43168

Cc: Igor Murzov <intergalactic.anonymous@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agoMerge tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Sat, 30 Jun 2012 02:05:41 +0000 (19:05 -0700)]
Merge tag 'pm-for-3.5-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael J. Wysocki:

 * Fix for a bug in async suspend error code path causing parents to
   wait forever for their children in case of a suspend error from
   Mandeep Singh Baines (-stable metarial).

 * Fix for a suspend regression related to earlier changes in the ACPI
   cpuidle driver from Deepthi Dharwar.

* tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.
  PM / Sleep: Prevent waiting forever on asynchronous suspend after abort

12 years agoprintk: Optimize if statement logic where newline exists
Steven Rostedt [Fri, 29 Jun 2012 15:40:11 +0000 (11:40 -0400)]
printk: Optimize if statement logic where newline exists

In reviewing Kay's fix up patch: "printk: Have printk() never buffer its
data", I found two if statements that could be combined and optimized.

Put together the two 'cont.len && cont.owner == current' if statements
into a single one, and check if we need to call cont_add(). This also
removes the unneeded double cont_flush() calls.

Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mop
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Fri, 29 Jun 2012 20:50:11 +0000 (13:50 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

Pull powerpc fixes from Benjamin Herrenschmidt:
 "Here are a few powerpc fixes.  Arguably some of this should have come
  to you earlier but I'm only just catching up after my medical leave.

  Mostly these fixes regressions, a couple are long standing bugs."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pseries: Fix software invalidate TCE
  powerpc: check_and_cede_processor() never cedes
  powerpc/ftrace: Do not trace restore_interrupts()
  powerpc: Fix Section mismatch warnings in prom_init.c
  ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt
  powerpc: Fix uninitialised error in numa.c
  powerpc: Fix BPF_JIT code to link with multiple TOCs

12 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Jun 2012 17:29:54 +0000 (10:29 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl
  x86, cpufeature: Catch duplicate CPU feature strings
  x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM
  x86: Fix kernel-doc warnings
  x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery

12 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Jun 2012 17:29:21 +0000 (10:29 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull oprofile fixlet from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array

12 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Jun 2012 17:24:56 +0000 (10:24 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull RCU fix from Ingo Molnar.

Fixes a bug introduced in this merge window by commit b1420f1c ("Make
rcu_barrier() less disruptive")

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Stop rcu_do_batch() from multiplexing the "count" variable

12 years agoprintk: flush continuation lines immediately to console
Kay Sievers [Thu, 28 Jun 2012 07:38:53 +0000 (09:38 +0200)]
printk: flush continuation lines immediately to console

Continuation lines are buffered internally, intended to merge the
chunked printk()s into a single record, and to isolate potentially
racy continuation users from usual terminated line users.

This though, has the effect that partial lines are not printed to
the console in the moment they are emitted. In case the kernel
crashes in the meantime, the potentially interesting printed
information would never reach the consoles.

Here we share the continuation buffer with the console copy logic,
and partial lines are always immediately flushed to the available
consoles. They are still buffered internally to improve the
readability and integrity of the messages and minimize the amount
of needed record headers to store.

Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopowerpc/pseries: Fix software invalidate TCE
Michael Neuling [Tue, 26 Jun 2012 21:26:37 +0000 (21:26 +0000)]
powerpc/pseries: Fix software invalidate TCE

The following added support for powernv but broke pseries/BML:
 1f1616e powerpc/powernv: Add TCE SW invalidation support

TCE_PCI_SW_INVAL was split into FREE and CREATE flags but the tests in
the pseries code were not updated to reflect this.

Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: stable@kernel.org [v3.3+]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
12 years agopowerpc: check_and_cede_processor() never cedes
Anton Blanchard [Wed, 27 Jun 2012 13:13:52 +0000 (13:13 +0000)]
powerpc: check_and_cede_processor() never cedes

Commit f948501b36c6 ("Make hard_irq_disable() actually hard-disable
interrupts") caused check_and_cede_processor to stop working.
->irq_happened will never be zero right after a hard_irq_disable
so the compiler removes the call to cede_processor completely.

The bug was introduced back in the lazy interrupt handling rework
of 3.4 but was hidden until recently because hard_irq_disable did
nothing.

This issue will eventually appear in 3.4 stable since the
hard_irq_disable fix is marked stable, so mark this one for stable
too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
12 years agopowerpc/ftrace: Do not trace restore_interrupts()
Steven Rostedt [Mon, 4 Jun 2012 16:27:54 +0000 (16:27 +0000)]
powerpc/ftrace: Do not trace restore_interrupts()

As I was adding code that affects all archs, I started testing function
tracer against PPC64 and found that it currently locks up with 3.4
kernel. I figured it was due to tracing a function that shouldn't be, so
I went through the following process to bisect to find the culprit:

 cat /debug/tracing/available_filter_functions > t
 num=`wc -l t`
 sed -ne "1,${num}p" t > t1
 let num=num+1
 sed -ne "${num},$p" t > t2
 cat t1 > /debug/tracing/set_ftrace_filter
 echo function /debug/tracing/current_tracer
 <failed? bisect t1, if not bisect t2>

It finally came down to this function: restore_interrupts()

I'm not sure why this locks up the system. It just seems to prevent
scheduling from occurring. Interrupts seem to still work, as I can ping
the box. But all user processes freeze.

When restore_interrupts() is not traced, function tracing works fine.

Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
12 years agopowerpc: Fix Section mismatch warnings in prom_init.c
Li Zhong [Thu, 7 Jun 2012 17:44:23 +0000 (17:44 +0000)]
powerpc: Fix Section mismatch warnings in prom_init.c

This patches tries to fix a couple of Section mismatch warnings like
following one:

WARNING: arch/powerpc/kernel/built-in.o(.text+0x2923c): Section mismatch
in reference from the function .prom_query_opal() to the
function .init.text:.call_prom()
The function .prom_query_opal() references
the function __init .call_prom().
This is often because .prom_query_opal lacks a __init
annotation or the annotation of .call_prom is wrong.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
12 years agoppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt
Tiejun Chen [Wed, 6 Jun 2012 20:56:43 +0000 (20:56 +0000)]
ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt

In entry_64.S version of ret_from_except_lite, you'll notice that
in the !preempt case, after we've checked MSR_PR we test for any
TIF flag in _TIF_USER_WORK_MASK to decide whether to go to do_work
or not. However, in the preempt case, we do a convoluted trick to
test SIGPENDING only if PR was set and always test NEED_RESCHED ...
but we forget to test any other bit of _TIF_USER_WORK_MASK !!! So
that means that with preempt, we completely fail to test for things
like single step, syscall tracing, etc...

This should be fixed as the following path:

 - Test PR. If not set, go to resume_kernel, else continue.

 - If go resume_kernel, to do that original do_work.

 - If else, then always test for _TIF_USER_WORK_MASK to decide to do
that original user_work, else restore directly.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
12 years agopowerpc: Fix uninitialised error in numa.c
Michael Neuling [Tue, 19 Jun 2012 20:01:45 +0000 (20:01 +0000)]
powerpc: Fix uninitialised error in numa.c

chroma_defconfig currently gives me this with gcc 4.6:
  arch/powerpc/mm/numa.c:638:13: error: 'dm' may be used uninitialized in this function [-Werror=uninitialized]

It's a bogus warning/error since of_get_drconf_memory() only writes it
anyway.

Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: <stable@kernel.org> [v3.3+]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
12 years agopowerpc: Fix BPF_JIT code to link with multiple TOCs
Michael Ellerman [Thu, 21 Jun 2012 17:50:27 +0000 (17:50 +0000)]
powerpc: Fix BPF_JIT code to link with multiple TOCs

If the kernel is big enough (eg. allyesconfig), the linker may need to
switch TOCs when calling from the BPF JIT code out to the external
helpers (skb_copy_bits() & bpf_internal_load_pointer_neg_helper()).

In order to do that we need to leave space after the bl for the linker
to insert a reload of our TOC pointer.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
12 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Thu, 28 Jun 2012 19:38:51 +0000 (12:38 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon changes from Guenter Roeck:
 "Just e-mail address updates"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: Update my e-mail address
  hwmon: (applesmc) correct email address for Jesper Juhl

12 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Thu, 28 Jun 2012 18:51:19 +0000 (11:51 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:
 "This fixes:
   - the WDIOC_GETSTATUS return value
   - the unregister of all NMI events on exit
   - the loading of the iTCO_wdt driver after the conversion to the
     lpc_ich mfd model."

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: core: fix WDIOC_GETSTATUS return value
  watchdog: hpwdt: Unregister NMI events on exit.
  watchdog: iTCO_wdt: add platform driver module alias

12 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Linus Torvalds [Thu, 28 Jun 2012 18:43:45 +0000 (11:43 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs

Pull UDF fixes from Jan Kara:
 "Make UDF more robust in presence of corrupted filesystem"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fortify loading of sparing table
  udf: Avoid run away loop when partition table length is corrupted
  udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()

12 years agoMerge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Thu, 28 Jun 2012 18:41:43 +0000 (11:41 -0700)]
Merge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs

Pull ubi/ubifs fixes from Artem Bityutskiy:
 "Fix the debugfs regression - we never enable it because incorrect
  'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)',
  but we had 'IS_ENABLED(DEBUG_FS)'.  Also fix incorrect assertion."

* tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs:
  UBI: correct usage of IS_ENABLED()
  UBIFS: correct usage of IS_ENABLED()
  UBIFS: fix assertion

12 years agowatchdog: core: fix WDIOC_GETSTATUS return value
Wim Van Sebroeck [Tue, 26 Jun 2012 18:07:21 +0000 (20:07 +0200)]
watchdog: core: fix WDIOC_GETSTATUS return value

In commit 7a87982420e5e126bfefeb42232d1fd92052794e we added
a wrapper for the WDIOC_GETSTATUS ioctl call. The code results
however in a different behaviour: it returns an error if the
driver doesn't support the status operation. This is not
according to the API that says that when we don't support
the status operation, that we just should return a 0 value.
Only when the device isn't there anymore, we should return an
error.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agowatchdog: hpwdt: Unregister NMI events on exit.
Mingarelli, Thomas [Tue, 26 Jun 2012 08:27:00 +0000 (10:27 +0200)]
watchdog: hpwdt: Unregister NMI events on exit.

This patch is to unregister for NMI events upon exit. Also we are now
making the default setting for allow_kdump enabled.

Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agowatchdog: iTCO_wdt: add platform driver module alias
Jan Beulich [Fri, 22 Jun 2012 15:41:00 +0000 (16:41 +0100)]
watchdog: iTCO_wdt: add platform driver module alias

The recent conversion of iTCO_wdt resulted in the driver no longer
getting loaded automatically, since it no longer has a
MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a
platform device, auto-loading can easily be done by having a respective
module alias in place.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Thu, 28 Jun 2012 18:26:42 +0000 (11:26 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Nearly all intel, one missing license header in nouveau, nothing
  majorly earth shattering."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/i915: allow PCH PWM override on IVB"
  drm/nouveau: add license header to prime.
  drm/i915: Fix eDP blank screen after S3 resume on HP desktops
  drm/i915: rip out the PM_IIR WARN

12 years agoMerge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
Linus Torvalds [Thu, 28 Jun 2012 18:22:25 +0000 (11:22 -0700)]
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register
  sh: kfr2r09: fix compile breakage

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 28 Jun 2012 18:20:31 +0000 (11:20 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking update from David Miller:

 1) Pairing and deadlock fixes in bluetooth from Johan Hedberg.

 2) Add device IDs for AR3011 and AR3012 bluetooth chips.  From
    Giancarlo Formicuccia and Marek Vasut.

 3) Fix wireless regulatory deadlock, from Eliad Peller.

 4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet.

 5) Revert the two commits that added skb_orphan_try(), it causes
    erratic bonding behavior with UDP clients and the gains it used to
    give are mostly no longer happening due to how BQL works.  From Eric
    Dumazet.

 6) It took two tries, but Thomas Graf fixed a problem wherein we
    registered ipv6 routing procfs files before their backend data were
    initialized properly.

 7) Fix max GSO size setting in be2net, from Sarveshwar Bandi.

 8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from
    Jason Wang.

 9) Fix use of stale SKB data pointer after skb_linearize() call in
    batman-adv, from Antonio Quartulli.

10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander
    Duyck.

11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn
    Mork.

12) Fix suspend/resume and open failure handling in usbnet from Ming
    Lei.

13) Attempt to fix device r8169 hangs for certain chips, from Francois
    Romieu.

14) Fix advancement of RX dirty pointer in some situations in sh_eth
    driver, from Yoshihiro Shimoda.

15) Attempt to fix restart of IPV6 routing table dumps when there is an
    intervening table update.  From Eric Dumazet.

16) Respect security_inet_conn_request() return value in ipv6 TCP.  From
    Neal Cardwell.

17) Add another iPAD device ID to ipheth driver, from Davide Gerhard.

18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep
    splats, from Eric Dumazet.

19) Make sure all bridge devices, regardless of whether they were
    created via netlink or ioctls, have their rtnetlink ops hooked up.
    From Thomas Graf and Stephen Hemminger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  9p: fix min_t() casting in p9pdu_vwritef()
  can: flexcan: use be32_to_cpup to handle the value of dt entry
  xen/netfront: teardown the device before unregistering it.
  bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)
  vhost: use USER_DS in vhost_worker thread
  ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP
  net: l2tp_eth: use LLTX to avoid LOCKDEP splats
  mac802154: add missed braces
  net: l2tp_eth: fix l2tp_eth_dev_xmit race
  net/mlx4_en: Release QP range in free_resources
  net/mlx4: Use single completion vector after NOP failure
  net/mlx4_en: Set correct port parameters during device initialization
  ipheth: add support for iPad
  caif-hsi: Add missing return in error path
  caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost
  caif: Clear shutdown mask to zero at reconnect.
  tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request()
  ipv6: fib: fix fib dump restart
  batman-adv: fix race condition in TT full-table replacement
  batman-adv: only drop packets of known wifi clients
  ...

12 years agoudf: Fortify loading of sparing table
Jan Kara [Wed, 27 Jun 2012 19:23:07 +0000 (21:23 +0200)]
udf: Fortify loading of sparing table

Add sanity checks when loading sparing table from disk to avoid accessing
unallocated memory or writing to it.

Signed-off-by: Jan Kara <jack@suse.cz>
12 years agoudf: Avoid run away loop when partition table length is corrupted
Jan Kara [Wed, 27 Jun 2012 18:20:22 +0000 (20:20 +0200)]
udf: Avoid run away loop when partition table length is corrupted

Check provided length of partition table so that (possibly maliciously)
corrupted partition table cannot cause accessing data beyond current buffer.

Signed-off-by: Jan Kara <jack@suse.cz>
12 years agoudf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()
Jan Kara [Wed, 27 Jun 2012 18:08:44 +0000 (20:08 +0200)]
udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()

Signed-off-by: Jan Kara <jack@suse.cz>
12 years agoMerge branches 'sh/urgent' and 'sh/trivial' into sh-fixes-for-linus
Paul Mundt [Thu, 28 Jun 2012 07:46:13 +0000 (16:46 +0900)]
Merge branches 'sh/urgent' and 'sh/trivial' into sh-fixes-for-linus

12 years agosh: Convert sh_clk_mstp32_register to sh_clk_mstp_register
Nobuhiro Iwamatsu [Wed, 27 Jun 2012 00:59:40 +0000 (09:59 +0900)]
sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register

sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: kfr2r09: fix compile breakage
Guennadi Liakhovetski [Wed, 27 Jun 2012 09:26:34 +0000 (11:26 +0200)]
sh: kfr2r09: fix compile breakage

Fix compile breakage caused by

commit aa82f9fcd0062782dcbe29a2c820ba7c04dbe572
Author: Paul Mundt <lethal@linux-sh.org>

    sh: kfr2r09 evt2irq migration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agoMerge branch 'for-davem' of git://gitorious.org/linux-can/linux-can
David S. Miller [Wed, 27 Jun 2012 22:27:24 +0000 (15:27 -0700)]
Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can

Marc Kleine-Budde says:

====================
here's a patch intended for v3.5, targeting net/master. Hui Wang has
found and fixed an endianness problem in the device tree handling in
the flexcan driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago9p: fix min_t() casting in p9pdu_vwritef()
Dan Carpenter [Tue, 26 Jun 2012 23:01:41 +0000 (23:01 +0000)]
9p: fix min_t() casting in p9pdu_vwritef()

I don't think we're actually likely to hit this limit but if we do
then the comparison should be done as size_t.  The original code
is equivalent to:
        len = strlen(sptr) % USHRT_MAX;

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Wed, 27 Jun 2012 19:54:05 +0000 (12:54 -0700)]
Merge tag 'usb-3.5-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are some small USB gadget bugfixes, and a few new USB device ids
  added to some drivers for the 3.5-rc5 release.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: CP210x Add 10 Device IDs
  USB: option: Add USB ID for Novatel Ovation MC551
  usb: phy: Fix Kconfig dependency for Phy drivers
  usb-storage: revert commit afff07e61a52 (Add 090c:1000 to unusal-devs)
  SCSI & usb-storage: add try_rc_10_first flag
  usb: musb: host: release dma channels if no active io
  usb: gadget: lpc32xx_udc: fix build error with debugfs enabled
  usb: otg: twl6030-usb: Fix twl writes
  USB: option: add id for Cellient MEN-200
  usb: dwc3: fix giveback of queued request in ep_dequeue
  usb: gadget: Complete fsl qe/udc driver conversion

12 years agoMerge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Wed, 27 Jun 2012 19:50:28 +0000 (12:50 -0700)]
Merge tag 'sound-3.5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Here you find quite a few changes for HD-audio and a copule of quirk
  additions for USB-audio.  All reasonably small and/or trivial."

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix power-map regression for HP dv6 & co
  ALSA: hda - Initialize caches at codec reconfiguration
  ALSA: hda - Fix memory leaks at module unload
  ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers
  ALSA: hda - Add Realtek ALC280 codec support
  ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
  ASoC: wm8994: remove duplicate code
  ALSA: usb-audio: add BOSS GT-100 support
  ALSA: HDA: Add inverted internal mic quirk for Lenovo S205
  ALSA: hda - Fix ALC272X codec detection
  ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for Notebooks
  ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Linus Torvalds [Wed, 27 Jun 2012 19:48:39 +0000 (12:48 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu

Pull a m68knommu fix from Greg Ungerer:
 "It contains a single fix for breakage using the Freescale FEC eth
  driver on ColdFire CPUs."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: define a local devm_clk_get() function

12 years agoMerge tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 27 Jun 2012 19:48:07 +0000 (12:48 -0700)]
Merge tag 'mmc-fixes-for-3.5-rc5' of git://git./linux/kernel/git/cjb/mmc

Pull MMC fixes from Chris Ball:

 - omap_hsmmc: Using AUTO_CMD12 (enabled by default in 3.5-rc1) has
   been found to cause data corruption on the BeagleBoard, but no
   other OMAP boards so far.  Revert the patch until there's a root
   cause explanation that makes sense, at which point we might
   decide to use a blacklist or whitelist.

 - mmc_block: Fix incorrect data timeouts for the case of multiblock
   (ACMD22) writes for block-addressed cards.

* tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  Revert "mmc: omap_hsmmc: Enable Auto CMD12"
  mmc: block: fix the data timeout issue with ACMD22

12 years agoMerge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Linus Torvalds [Wed, 27 Jun 2012 19:44:58 +0000 (12:44 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull clk common framework fixes from Mike Turquette:
 "This contains three NULL pointer fixes and two device regression
  fixups.

  Two NULL pointer dereferences were in the common clk core due to lack
  of sanity checking and the third NPD was in the mxs-specific clock
  code due to incorrect use of __initdata.

  The device regressions were the result of improper data: a wrong
  string name for matching DT data broke the SPEAr ethernet controller
  and another string matching problem in the mxs clock data resulted in
  a broken MMC controller."

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: mxs: fix clock lookup after freeing init memory
  clk: mxs: fix ref_io clock definition
  clk: Check parent for NULL in clk_change_rate
  clk: Allow late cache allocation for clk->parents
  clk: SPEAr600: Fix ethernet clock name for DT based probing

12 years agochmod +x scripts/gfp-translate
Dave Jones [Tue, 26 Jun 2012 23:56:10 +0000 (19:56 -0400)]
chmod +x scripts/gfp-translate

This script lacks an executable bit.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel...
Dave Airlie [Wed, 27 Jun 2012 18:56:20 +0000 (19:56 +0100)]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Daniel writes:
"Two tiny patches and one revert:
- Kill a bogus error message introduced in 3.4, further Bspec reading
  indicates that this is how the hw is supposed to work.
- Reorder one backlight register restore, fixing broken backlight on some
  machines after resume.
- Revert a hack from Jesse for ivb backlight control - it breaks the
  backlight controls on my shiny new ivb laptop."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  Revert "drm/i915: allow PCH PWM override on IVB"
  drm/i915: Fix eDP blank screen after S3 resume on HP desktops
  drm/i915: rip out the PM_IIR WARN

12 years agoRevert "drm/i915: allow PCH PWM override on IVB"
Daniel Vetter [Wed, 27 Jun 2012 14:43:36 +0000 (16:43 +0200)]
Revert "drm/i915: allow PCH PWM override on IVB"

This reverts commit f82cfb6bcda164ef3a66b8c3fc549b1f9bdd09ad.

This breaks the backlight controls on my IVB asus zenbook with an eDP
panel.

I guess the right fix would be to read this bit and use either the pch
or the cpu register to frob the backlight values. But that is stuff
for -next.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agoPM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.
Deepthi Dharwar [Mon, 25 Jun 2012 21:59:54 +0000 (23:59 +0200)]
PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.

Commit e978aa7d7d57d04eb5f88a7507c4fb98577def77 ( cpuidle: Move
dev->last_residency update to driver enter routine; remove dev->last_state)
was  breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164

This was fixed in commit 3439a8da16bcad6b0982ece938c9f8299bb53584
(ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression)
by removing acpi_idle_suspend flag.
- https://lkml.org/lkml/2011/11/14/74

But this did fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3
recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commit e978aa7d broke suspend and
with commit 3439a8da resume was not working with acpi_idle driver.

This patch fixes the regression that caused this issue
in the first place. acpi_idle_suspend flag is essential on
some x86 systems to prevent the cpus from going to deeper C-states
when suspend is triggered ( commit b04e7bdb984 )
So reverting the commit 3439a8da is essential.

By default, irqs are disabled in cpu_idle arch specific call
and re-enabled in idle state return path . During suspend,
the acpi_idle_suspend flag is set, which
prevents the cpus from going to deeper idle states,
it is essential to enabling the irqs in this return path too.

To address the suspend issue,
we were not re-enabling the interrupts while returning from
acpi_idle_enter_bm() routine if acpi_idle_suspend flag is set.
and this caused suspend failure.

In addition to the above, to improve the readability of the code,
return of -ENIVAL is replaced with -EBUSY in acpi_idle_suspend
return path. Implying that the system is currently busy when suspend
is in progress, which prevents the cpus from entering deeper C-states.

Reported-and-Tested-by: Dav Hansen <dave@linux.vnet.ibm.com>
Tested-by: Preeti Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoARM: OMAP4470: Fix OMAP4470 boot failure
Jon Hunter [Mon, 25 Jun 2012 17:38:23 +0000 (12:38 -0500)]
ARM: OMAP4470: Fix OMAP4470 boot failure

OMAP4470 currently fails to boot, printing various messages such as ...

omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck
omap_hwmod: mpu: cannot _init_clocks
------------[ cut here ]------------
WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4()
omap_hwmod: mpu: couldn't init clocks
Modules linked in:
[<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>] (warn_slowpath_common+0x4c/0x64)
[<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>] (warn_slowpath_fmt+0x30/0x40)
[<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>] (_init+0x2a0/0x2e4)
[<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>] (omap_hwmod_setup_one+0x40/0x60)
[<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>] (omap_hwmod_setup_one+0x34/0x60)
[<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250)
[<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108)
[<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>] (omap4_timer_init+0x10/0x5c)
[<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>] (time_init+0x20/0x30)
[<c066c418>] (time_init+0x20/0x30) from [<c0668814>] (start_kernel+0x1b0/0x304)
[<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044)
---[ end trace 1b75b31a2719ed1c ]---

The problem is that currently none of the clocks are being registered for
OMAP4470 devices and so on boot-up no clocks can be found and the kernel panics.

This fix allows the kernel to boot without failure using a simple RAMDISK file
system on OMAP4470 blaze board.

Per feedback from Paul and Benoit the 4470 clock data is incomplete for new
modules such as the 2D graphics block that has been added to the 4470.
Therefore add a warning to indicate that the clock data is incomplete.

Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
12 years agoUBI: correct usage of IS_ENABLED()
Brian Norris [Mon, 18 Jun 2012 23:31:23 +0000 (16:31 -0700)]
UBI: correct usage of IS_ENABLED()

Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one
regression but introduced a different regression - the debugfs is now always
compiled out. Root cause: IS_ENABLED() arguments should be used with the
CONFIG_* prefix.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
12 years agoUBIFS: correct usage of IS_ENABLED()
Brian Norris [Mon, 18 Jun 2012 23:31:22 +0000 (16:31 -0700)]
UBIFS: correct usage of IS_ENABLED()

Commit "818039c UBIFS: fix debugfs-less systems support" fixed one
regression but introduced a different regression - the debugfs is now always
compiled out. Root cause: IS_ENABLED() arguments should be used with the
CONFIG_* prefix.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
12 years agocan: flexcan: use be32_to_cpup to handle the value of dt entry
Hui Wang [Wed, 27 Jun 2012 08:19:18 +0000 (16:19 +0800)]
can: flexcan: use be32_to_cpup to handle the value of dt entry

The freescale arm i.MX series platform can support this driver, and
usually the arm cpu works in the little endian mode by default, while
device tree entry value is stored in big endian format, we should use
be32_to_cpup() to handle them, after modification, it can work well
both on the le cpu and be cpu.

Cc: stable <stable@vger.kernel.org> # v3.2+
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
12 years agodrm/nouveau: add license header to prime.
Dave Airlie [Wed, 27 Jun 2012 08:26:01 +0000 (09:26 +0100)]
drm/nouveau: add license header to prime.

Just forgot this when I posted it, and yes I'm the only person
to have changed the file since.

Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoxen/netfront: teardown the device before unregistering it.
Ian Campbell [Mon, 25 Jun 2012 22:48:41 +0000 (22:48 +0000)]
xen/netfront: teardown the device before unregistering it.

Fixes:
[   15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0()
[   15.470326] sysfs: kobject eth0 without dirent
[   15.470333] Modules linked in:
[   15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93
and
[    9.150554] BUG: unable to handle kernel paging request at 2b359000
[    9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0
[    9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000
[    9.150604] Oops: 0002 [#1] SMP
[    9.150613] Modules linked in:

This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190

Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: William Dauchy <wdauchy@gmail.com>
Cc: stable@kernel.org
Cc: 675190@bugs.debian.org
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)
stephen hemminger [Tue, 26 Jun 2012 05:48:45 +0000 (05:48 +0000)]
bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)

This ensures that bridges created with brctl(8) or ioctl(2) directly
also carry IFLA_LINKINFO when dumped over netlink. This also allows
to create a bridge with ioctl(2) and delete it with RTM_DELLINK.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agovhost: use USER_DS in vhost_worker thread
Jens Freimann [Tue, 26 Jun 2012 00:59:58 +0000 (00:59 +0000)]
vhost: use USER_DS in vhost_worker thread

On some architectures address spaces are set up in a way that this is
not necessary to work properly but on some others (like s390) it is.
Make sure we operate on the user address space to allow copy_xxx_user()
from the vhost_worker() thread by setting it explicitly before calling
use_mm() and revert it after unuse_mm().

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry
Sachin Kamat [Wed, 27 Jun 2012 01:03:00 +0000 (10:03 +0900)]
ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry

Commit 20ef9e08 ("ARM: EXYNOS: Support DMA for EXYNOS5250 SoC")
renamed EXYNOS4_DEV_DMA to EXYNOS_DEV_DMA. But some machine entries
still had EXYNOS4_DEV_DMA. Changed them to EXYNOS_DEV_DMA.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
12 years agoixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP
Alexander Duyck [Mon, 25 Jun 2012 21:54:46 +0000 (21:54 +0000)]
ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP

FCoE target mode was experiencing issues due to the fact that we were
sending up data frames that were padded to 60 bytes after the DDP logic had
already stripped the frame down to 52 or 56 depending on the use of VLANs.
This was resulting in the FCoE DDP logic having issues since it thought the
frame still had data in it due to the padding.

To resolve this, adding code so that we do not pad FCoE frames prior to
handling them to the stack.

CC: <stable@vger.kernel.org>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: l2tp_eth: use LLTX to avoid LOCKDEP splats
Eric Dumazet [Mon, 25 Jun 2012 05:35:45 +0000 (05:35 +0000)]
net: l2tp_eth: use LLTX to avoid LOCKDEP splats

Denys Fedoryshchenko reported a LOCKDEP issue with l2tp code.

[ 8683.927442] ======================================================
[ 8683.927555] [ INFO: possible circular locking dependency detected ]
[ 8683.927672] 3.4.1-build-0061 #14 Not tainted
[ 8683.927782] -------------------------------------------------------
[ 8683.927895] swapper/0/0 is trying to acquire lock:
[ 8683.928007]  (slock-AF_INET){+.-...}, at: [<e0fc73ec>]
l2tp_xmit_skb+0x173/0x47e [l2tp_core]
[ 8683.928121]
[ 8683.928121] but task is already holding lock:
[ 8683.928121]  (_xmit_ETHER#2){+.-...}, at: [<c02f062d>]
sch_direct_xmit+0x36/0x119
[ 8683.928121]
[ 8683.928121] which lock already depends on the new lock.
[ 8683.928121]
[ 8683.928121]
[ 8683.928121] the existing dependency chain (in reverse order) is:
[ 8683.928121]
[ 8683.928121] -> #1 (_xmit_ETHER#2){+.-...}:
[ 8683.928121]        [<c015a561>] lock_acquire+0x71/0x85
[ 8683.928121]        [<c034da2d>] _raw_spin_lock+0x33/0x40
[ 8683.928121]        [<c0304e0c>] ip_send_reply+0xf2/0x1ce
[ 8683.928121]        [<c0317dbc>] tcp_v4_send_reset+0x153/0x16f
[ 8683.928121]        [<c0317f4a>] tcp_v4_do_rcv+0x172/0x194
[ 8683.928121]        [<c031929b>] tcp_v4_rcv+0x387/0x5a0
[ 8683.928121]        [<c03001d0>] ip_local_deliver_finish+0x13a/0x1e9
[ 8683.928121]        [<c0300645>] NF_HOOK.clone.11+0x46/0x4d
[ 8683.928121]        [<c030075b>] ip_local_deliver+0x41/0x45
[ 8683.928121]        [<c03005dd>] ip_rcv_finish+0x31a/0x33c
[ 8683.928121]        [<c0300645>] NF_HOOK.clone.11+0x46/0x4d
[ 8683.928121]        [<c0300960>] ip_rcv+0x201/0x23d
[ 8683.928121]        [<c02de91b>] __netif_receive_skb+0x329/0x378
[ 8683.928121]        [<c02deae8>] netif_receive_skb+0x4e/0x7d
[ 8683.928121]        [<e08d5ef3>] rtl8139_poll+0x243/0x33d [8139too]
[ 8683.928121]        [<c02df103>] net_rx_action+0x90/0x15d
[ 8683.928121]        [<c012b2b5>] __do_softirq+0x7b/0x118
[ 8683.928121]
[ 8683.928121] -> #0 (slock-AF_INET){+.-...}:
[ 8683.928121]        [<c0159f1b>] __lock_acquire+0x9a3/0xc27
[ 8683.928121]        [<c015a561>] lock_acquire+0x71/0x85
[ 8683.928121]        [<c034da2d>] _raw_spin_lock+0x33/0x40
[ 8683.928121]        [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e
[l2tp_core]
[ 8683.928121]        [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f
[l2tp_eth]
[ 8683.928121]        [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2
[ 8683.928121]        [<c02f064c>] sch_direct_xmit+0x55/0x119
[ 8683.928121]        [<c02e0528>] dev_queue_xmit+0x282/0x418
[ 8683.928121]        [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
[ 8683.928121]        [<c031f524>] arp_xmit+0x22/0x24
[ 8683.928121]        [<c031f567>] arp_send+0x41/0x48
[ 8683.928121]        [<c031fa7d>] arp_process+0x289/0x491
[ 8683.928121]        [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
[ 8683.928121]        [<c031f7a0>] arp_rcv+0xb1/0xc3
[ 8683.928121]        [<c02de91b>] __netif_receive_skb+0x329/0x378
[ 8683.928121]        [<c02de9d3>] process_backlog+0x69/0x130
[ 8683.928121]        [<c02df103>] net_rx_action+0x90/0x15d
[ 8683.928121]        [<c012b2b5>] __do_softirq+0x7b/0x118
[ 8683.928121]
[ 8683.928121] other info that might help us debug this:
[ 8683.928121]
[ 8683.928121]  Possible unsafe locking scenario:
[ 8683.928121]
[ 8683.928121]        CPU0                    CPU1
[ 8683.928121]        ----                    ----
[ 8683.928121]   lock(_xmit_ETHER#2);
[ 8683.928121]                                lock(slock-AF_INET);
[ 8683.928121]                                lock(_xmit_ETHER#2);
[ 8683.928121]   lock(slock-AF_INET);
[ 8683.928121]
[ 8683.928121]  *** DEADLOCK ***
[ 8683.928121]
[ 8683.928121] 3 locks held by swapper/0/0:
[ 8683.928121]  #0:  (rcu_read_lock){.+.+..}, at: [<c02dbc10>]
rcu_lock_acquire+0x0/0x30
[ 8683.928121]  #1:  (rcu_read_lock_bh){.+....}, at: [<c02dbc10>]
rcu_lock_acquire+0x0/0x30
[ 8683.928121]  #2:  (_xmit_ETHER#2){+.-...}, at: [<c02f062d>]
sch_direct_xmit+0x36/0x119
[ 8683.928121]
[ 8683.928121] stack backtrace:
[ 8683.928121] Pid: 0, comm: swapper/0 Not tainted 3.4.1-build-0061 #14
[ 8683.928121] Call Trace:
[ 8683.928121]  [<c034bdd2>] ? printk+0x18/0x1a
[ 8683.928121]  [<c0158904>] print_circular_bug+0x1ac/0x1b6
[ 8683.928121]  [<c0159f1b>] __lock_acquire+0x9a3/0xc27
[ 8683.928121]  [<c015a561>] lock_acquire+0x71/0x85
[ 8683.928121]  [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core]
[ 8683.928121]  [<c034da2d>] _raw_spin_lock+0x33/0x40
[ 8683.928121]  [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core]
[ 8683.928121]  [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core]
[ 8683.928121]  [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth]
[ 8683.928121]  [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2
[ 8683.928121]  [<c02f064c>] sch_direct_xmit+0x55/0x119
[ 8683.928121]  [<c02e0528>] dev_queue_xmit+0x282/0x418
[ 8683.928121]  [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2
[ 8683.928121]  [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
[ 8683.928121]  [<c031f524>] arp_xmit+0x22/0x24
[ 8683.928121]  [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2
[ 8683.928121]  [<c031f567>] arp_send+0x41/0x48
[ 8683.928121]  [<c031fa7d>] arp_process+0x289/0x491
[ 8683.928121]  [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42
[ 8683.928121]  [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
[ 8683.928121]  [<c031f7a0>] arp_rcv+0xb1/0xc3
[ 8683.928121]  [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42
[ 8683.928121]  [<c02de91b>] __netif_receive_skb+0x329/0x378
[ 8683.928121]  [<c02de9d3>] process_backlog+0x69/0x130
[ 8683.928121]  [<c02df103>] net_rx_action+0x90/0x15d
[ 8683.928121]  [<c012b2b5>] __do_softirq+0x7b/0x118
[ 8683.928121]  [<c012b23a>] ? local_bh_enable+0xd/0xd
[ 8683.928121]  <IRQ>  [<c012b4d0>] ? irq_exit+0x41/0x91
[ 8683.928121]  [<c0103c6f>] ? do_IRQ+0x79/0x8d
[ 8683.928121]  [<c0157ea1>] ? trace_hardirqs_off_caller+0x2e/0x86
[ 8683.928121]  [<c034ef6e>] ? common_interrupt+0x2e/0x34
[ 8683.928121]  [<c0108a33>] ? default_idle+0x23/0x38
[ 8683.928121]  [<c01091a8>] ? cpu_idle+0x55/0x6f
[ 8683.928121]  [<c033df25>] ? rest_init+0xa1/0xa7
[ 8683.928121]  [<c033de84>] ? __read_lock_failed+0x14/0x14
[ 8683.928121]  [<c0498745>] ? start_kernel+0x303/0x30a
[ 8683.928121]  [<c0498209>] ? repair_env_string+0x51/0x51
[ 8683.928121]  [<c04980a8>] ? i386_start_kernel+0xa8/0xaf

It appears that like most virtual devices, l2tp should be converted to
LLTX mode.

This patch takes care of statistics using atomic_long in both RX and TX
paths, and fix a bug in l2tp_eth_dev_recv(), which was caching skb->data
before a pskb_may_pull() call.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Cc: James Chapman <jchapman@katalix.com>
Cc: Hong zhi guo <honkiko@gmail.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoUSB: CP210x Add 10 Device IDs
Craig Shelley [Tue, 26 Jun 2012 22:20:04 +0000 (23:20 +0100)]
USB: CP210x Add 10 Device IDs

This patch adds 10 device IDs for CP210x based devices from the following manufacturers:
Timewave
Clipsal
Festo
Link Instruments

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: option: Add USB ID for Novatel Ovation MC551
Forest Bond [Fri, 22 Jun 2012 14:30:38 +0000 (10:30 -0400)]
USB: option: Add USB ID for Novatel Ovation MC551

This device is also known as the Verizon USB551L.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agousb: phy: Fix Kconfig dependency for Phy drivers
Alexandre Pereira da Silva [Tue, 26 Jun 2012 14:56:48 +0000 (11:56 -0300)]
usb: phy: Fix Kconfig dependency for Phy drivers

USB phy layer driver are only built if usb host is selected, but they
are used too by USB_GADGET drivers

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoRevert "mmc: omap_hsmmc: Enable Auto CMD12"
Ming Lei [Fri, 22 Jun 2012 10:49:35 +0000 (18:49 +0800)]
Revert "mmc: omap_hsmmc: Enable Auto CMD12"

This patch reverts the commit dba3c29ea4a1d5d544.

After bisecting, this commit dba3c29 is found to ruin micro-SD card data
(writing incorrect file, or fs is corrupt after several times mount)
on the beagle-xm revB, and reverting the commit will fix the problem.

Also from TRM of OMAP3/OMAP4/DM37x, the below is mentioned about
the Auto CMD12 Enable bit.
        - SDIO does not support this feature.
        - SD card only.
Looks it is not suitable to always enable Auto CMD12 in host controller
driver.

Considered that the commit is not mature enough, so ask to revert it
first.

Cc: Balaji T K <balajitk@ti.com>
Cc: Venkatraman S <svenkatr@ti.com>
Buglink: https://lkml.org/lkml/2012/6/10/225
Reported-by: Paolo Pisati <p.pisati@gmail.com>
Reported-bisected-and-tested-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agommc: block: fix the data timeout issue with ACMD22
Subhash Jadavani [Wed, 13 Jun 2012 11:40:43 +0000 (17:10 +0530)]
mmc: block: fix the data timeout issue with ACMD22

If multi block write operation fails for SD card, during
error handling we send the SD_APP_SEND_NUM_WR_BLKS (ACMD22)
to know how many blocks were already programmed by card.

But mmc_sd_num_wr_blocks() function which sends the ACMD22
calculates the data timeout value from csd.tacc_ns and
csd.tacc_clks parameters which will be 0 for block addressed
(>2GB cards) SD card. This would result in timeout_ns and
timeout_clks being 0 in the mmc_request passed to host driver.
This means host controller would program its data timeout timer
value with 0 which could result in DATA TIMEOUT errors from
controller.

To fix this issue, mmc_sd_num_wr_blocks() should instead
just call the mmc_set_data_timeout() to calculate the
data timeout value. mmc_set_data_timeout() function
ensures that non zero timeout value is set even for
block addressed SD cards.

Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agosyslog: fill buffer with more than a single message for SYSLOG_ACTION_READ
Jan Beulich [Fri, 22 Jun 2012 15:36:09 +0000 (16:36 +0100)]
syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ

The recent changes to the printk buffer management resulted in
SYSLOG_ACTION_READ to only return a single message, whereas previously
the buffer would get filled as much as possible. As, when too small to
fit everything, filling it to the last byte would be pretty ugly with
the new code, the patch arranges for as many messages as possible to
get returned in a single invocation. User space tools in at least all
SLES versions depend on the old behavior.

This at once addresses the issue attempted to get fixed with commit
b56a39ac263e5b8cafedd551a49c2105e68b98c2 ("printk: return -EINVAL if
the message len is bigger than the buf size"), and since that commit
widened the possibility for losing a message altogether, the patch
here assumes that this other commit would get reverted first
(otherwise the patch here won't apply).

Furthermore, this patch also addresses the problem dealt with in
commit 4a77a5a06ec66ed05199b301e7c25f42f979afdc ("printk: use mutex
lock to stop syslog_seq from going wild"), so I'd recommend reverting
that one too (albeit there's no direct collision between the two).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kay Sievers <kay@vrfy.org>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoRevert "printk: return -EINVAL if the message len is bigger than the buf size"
Greg Kroah-Hartman [Tue, 26 Jun 2012 19:35:24 +0000 (12:35 -0700)]
Revert "printk: return -EINVAL if the message len is bigger than the buf size"

This reverts commit b56a39ac263e5b8cafedd551a49c2105e68b98c2.

A better patch from Jan will follow this to resolve the issue.

Acked-by: Kay Sievers <kay@vrfy.org>
Cc: Fengguang Wu <wfg@linux.intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Tue, 26 Jun 2012 18:26:50 +0000 (11:26 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Just two changes: one udl endian fix, one nouveau memory corruption on
  some GPUs."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/fbcon: using nv_two_heads is not a good idea
  drm/udl: Make sure to get correct endian keys from vendor descriptor

12 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Tue, 26 Jun 2012 18:23:41 +0000 (11:23 -0700)]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:
 "The most important one is a purification of Kconfig for CONFIG_HID;
  the inclusion of HID groups and autoloading didn't leave the Kconfig
  in a really consistent state.  Henrik's patch fixes that.  In addition
  to that, there are two small fixes for logitech and magicmouse
  drivers."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Fix the generic Kconfig options
  HID: magicmouse: Correct report range of major / minor axes
  HID: logitech: don't use stack based dj_report structures

12 years agoALSA: hda - Fix power-map regression for HP dv6 & co
Takashi Iwai [Tue, 26 Jun 2012 15:35:10 +0000 (17:35 +0200)]
ALSA: hda - Fix power-map regression for HP dv6 & co

The recent fix for power-map controls (commit b0791dda813) caused
regressions on some other HP laptops.  They have fixed pins but these
pins are exposed as jack-detectable.  Thus the driver tries to control
the power-map dynamically per jack detection where it never gets on.

This patch adds the check of connection and it assumes the no jack
detection is available for fixed pins no matter what pin capability
says.

BugLink: http://bugs.launchpad.net/bugs/1013183
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agox86, cpufeature: Remove stray %s, add -w to mkcapflags.pl
H. Peter Anvin [Tue, 26 Jun 2012 14:58:23 +0000 (07:58 -0700)]
x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl

There was a stray %s left from testing, remove it.

Add -w to the #! line (which is parsed by Perl even if the Perl
interpreter is invoked explicitly on the command line) to catch these
kinds of errors in the future.

Reported-by: Jean Delvare <khali@linux-fr.org>
Link: http://lkml.kernel.org/r/20120626143246.0c9bf301@endymion.delvare
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
12 years agoALSA: hda - Initialize caches at codec reconfiguration
Takashi Iwai [Tue, 26 Jun 2012 13:01:33 +0000 (15:01 +0200)]
ALSA: hda - Initialize caches at codec reconfiguration

Better to clean up the caches for avoiding inconsistent codec state
after the reconfiguration.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix memory leaks at module unload
Takashi Iwai [Tue, 26 Jun 2012 13:00:20 +0000 (15:00 +0200)]
ALSA: hda - Fix memory leaks at module unload

Some caches aren't released properly at module unloading time.

Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers
Takashi Iwai [Tue, 26 Jun 2012 12:54:32 +0000 (14:54 +0200)]
ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers

When moved to the helper code, forgot to release the verb arrays.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agodrm/nouveau/fbcon: using nv_two_heads is not a good idea
Ben Skeggs [Tue, 26 Jun 2012 02:12:30 +0000 (12:12 +1000)]
drm/nouveau/fbcon: using nv_two_heads is not a good idea

nv_two_heads() was never meant to be used outside of pre-nv50 code.  The
code checks for >= NV_10 for 2 CRTCs, then downgrades a few specific
chipsets to 1 CRTC based on (pci_device & 0x0ff0).

The breakage example seen is on GTX 560Ti, with a pciid of 0x1200, which
gets detected as an NV20 (0x020x) with 1 CRTC by nv_two_heads(), causing
memory corruption because there's actually 2 CRTCs..

This switches fbcon to use the CRTC count directly from the mode_config
structure, which will also fix the same issue on Kepler boards which have
4 CRTCs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
Kevin Hilman [Tue, 26 Jun 2012 10:29:57 +0000 (03:29 -0700)]
ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n

commit 8259573b (ARM: OMAP2+: nand: Make board_onenand_init() visible
to board code) broke the build for configs with OneNAND disabled.  By
removing the static in the header file, it created a duplicate definition
in the .c and the .h files, resuling in a build error:

/work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.c:102:111: error: redefinition of 'board_onenand_init'
/work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.h:56:51: note: previous definition of 'board_onenand_init' was here
make[2]: *** [arch/arm/mach-omap2/board-flash.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/mach-omap2] Error 2
make: *** [sub-make] Error 2

Fix this by removing the duplicate dummy entry from the C file.

Cc: Enric Balletbò i Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
12 years agoclk: mxs: fix clock lookup after freeing init memory
Marc Kleine-Budde [Thu, 21 Jun 2012 18:04:25 +0000 (20:04 +0200)]
clk: mxs: fix clock lookup after freeing init memory

The struct clk_lookup are marked as __initdata, resulting in being
removed from memory after the kernel finished booting. However this
leads to a NULL pointer de-ref if loading a module which uses clk_get.

This patch removes the __initdata from the struct clk_lookup.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
12 years agoclk: mxs: fix ref_io clock definition
Shawn Guo [Fri, 22 Jun 2012 02:13:20 +0000 (10:13 +0800)]
clk: mxs: fix ref_io clock definition

The definition of clocks ref_io0 and ref_io1 were inverted.  It causes
a mmc regression on some boards right away.  Fix the regression by
correcting the ref_io clock definition.

Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
12 years agoclk: Check parent for NULL in clk_change_rate
Pawel Moll [Fri, 8 Jun 2012 13:04:06 +0000 (14:04 +0100)]
clk: Check parent for NULL in clk_change_rate

clk_change_rate() is accessing parent's rate without checking
if the parent exists at all. In case of root clocks this will
cause NULL pointer dereference.

This patch follows what clk_calc_new_rates() does in such
situation.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org
12 years agoclk: Allow late cache allocation for clk->parents
Rajendra Nayak [Wed, 6 Jun 2012 09:11:31 +0000 (14:41 +0530)]
clk: Allow late cache allocation for clk->parents

Parent clocks for muxes are cached in clk->parents to
avoid frequent lookups, however the cache allocation happens
only during clock registeration and later clk_set_parent()
assumes a cache space available and allocated.

This is not entirely true for platforms which do early clock
registerations wherein the cache allocation using kzalloc
could fail during clock registeration.

Allow cache allocation to happen later as part of clk_set_parent()
to help such cases and avoid crashes assuming a cache being
available.

While here also replace existing kmalloc() with kzalloc()
in the file.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org
12 years agoclk: SPEAr600: Fix ethernet clock name for DT based probing
Stefan Roese [Fri, 11 May 2012 08:41:18 +0000 (10:41 +0200)]
clk: SPEAr600: Fix ethernet clock name for DT based probing

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
12 years agomac802154: add missed braces
alex.bluesman.smirnov@gmail.com [Mon, 25 Jun 2012 03:30:13 +0000 (03:30 +0000)]
mac802154: add missed braces

Add missed braces after 'if' operator.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: l2tp_eth: fix l2tp_eth_dev_xmit race
Eric Dumazet [Mon, 25 Jun 2012 00:45:14 +0000 (00:45 +0000)]
net: l2tp_eth: fix l2tp_eth_dev_xmit race

Its illegal to dereference skb after giving it to l2tp_xmit_skb()
as it might be already freed/reused.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_en: Release QP range in free_resources
Yevgeny Petrilin [Mon, 25 Jun 2012 00:24:13 +0000 (00:24 +0000)]
net/mlx4_en: Release QP range in free_resources

Add a missing resource release in ring cleanup.
Not doing this leaves a range of QPs that are being reserved,
and no one can use them.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4: Use single completion vector after NOP failure
Yevgeny Petrilin [Mon, 25 Jun 2012 00:24:12 +0000 (00:24 +0000)]
net/mlx4: Use single completion vector after NOP failure

Fix a crash at the error flow of NOP command which caused the driver to try and use
a completion vector which wasn't allocated.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_en: Set correct port parameters during device initialization
Yevgeny Petrilin [Mon, 25 Jun 2012 00:24:11 +0000 (00:24 +0000)]
net/mlx4_en: Set correct port parameters during device initialization

Set valid port parameters: MTU and flow control configuration when
configuring the port during HW device initialization,
prior to the net device open() being called.
Using  invalid parameters (such as all zeros)
could lead to bad firmware behavior.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipheth: add support for iPad
Davide Gerhard [Mon, 25 Jun 2012 07:04:47 +0000 (09:04 +0200)]
ipheth: add support for iPad

This adds support for the iPad to the ipheth driver.
(product id = 0x129a)

Signed-off-by: Davide Gerhard <rainbow@irh.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocaif-hsi: Add missing return in error path
Sjur Brændeland [Sun, 24 Jun 2012 11:01:38 +0000 (11:01 +0000)]
caif-hsi: Add missing return in error path

Fix a missing return, causing access to freed memory.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocaif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost
Per Ellefsen [Sun, 24 Jun 2012 11:01:37 +0000 (11:01 +0000)]
caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost

When receiving a piggyback'ed descriptor containing an
embedded frame, but no payload, the embedded frame was
lost.

Signed-off-by: Per Ellefsen <per.ellefsen@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>