git.stricted.de - GitHub/moto-9609/android_kernel_motorola

mwave: fix info leak in mwave_ioctl()

Smatch complains that on 64 bit systems, there is a hole in the
MW_ABILITIES struct between ->component_count and ->component_list[].
It leaks stack information from the mwave_ioctl() function.

I've added a memset() to initialize the struct to zero.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem.c: rename try_atomic_semop() to perform_atomic_semop(), docu update

Cleanup: Some minor points that I noticed while writing the previous
patches

1) The name try_atomic_semop() is misleading: The function performs the
operation (if it is possible).

2) Some documentation updates.

No real code change, a rename and documentation changes.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem.c: replace shared sem_otime with per-semaphore value

sem_otime contains the time of the last semaphore operation that
completed successfully. Every operation updates this value, thus access
from multiple cpus can cause thrashing.

Therefore the patch replaces the variable with a per-semaphore variable.
The per-array sem_otime is only calculated when required.

No performance improvement on a single-socket i3 - only important for
larger systems.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem.c: always use only one queue for alter operations

There are two places that can contain alter operations:
- the global queue: sma->pending_alter
- the per-semaphore queues: sma->sem_base[].pending_alter.

Since one of the queues must be processed first, this causes an odd
priorization of the wakeups: complex operations have priority over
simple ops.

The patch restores the behavior of linux <=3.0.9: The longest waiting
operation has the highest priority.

This is done by using only one queue:
- if there are complex ops, then sma->pending_alter is used.
- otherwise, the per-semaphore queues are used.

As a side effect, do_smart_update_queue() becomes much simpler: no more
goto logic.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem: separate wait-for-zero and alter tasks into seperate queues

Introduce separate queues for operations that do not modify the
semaphore values. Advantages:

- Simpler logic in check_restart().
- Faster update_queue(): Right now, all wait-for-zero operations are
always tested, even if the semaphore value is not 0.
- wait-for-zero gets again priority, as in linux <=3.0.9

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem.c: cacheline align the semaphore structures

As now each semaphore has its own spinlock and parallel operations are
possible, give each semaphore its own cacheline.

On a i3 laptop, this gives up to 28% better performance:

  #semscale 10 | grep "interleave 2"
  - before:
  Cpus 1, interleave 2 delay 0: 36109234 in 10 secs
  Cpus 2, interleave 2 delay 0: 55276317 in 10 secs
  Cpus 3, interleave 2 delay 0: 62411025 in 10 secs
  Cpus 4, interleave 2 delay 0: 81963928 in 10 secs

  -after:
  Cpus 1, interleave 2 delay 0: 35527306 in 10 secs
  Cpus 2, interleave 2 delay 0: 70922909 in 10 secs <<< + 28%
  Cpus 3, interleave 2 delay 0: 80518538 in 10 secs
  Cpus 4, interleave 2 delay 0: 89115148 in 10 secs <<< + 8.7%

i3, with 2 cores and with hyperthreading enabled.  Interleave 2 in order
use first the full cores.  HT partially hides the delay from cacheline
trashing, thus the improvement is "only" 8.7% if 4 threads are running.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/util.c, ipc_rcu_alloc: cacheline align allocation

Enforce that ipc_rcu_alloc returns a cacheline aligned pointer on SMP.

Rationale:

The SysV sem code tries to move the main spinlock into a seperate
cacheline (____cacheline_aligned_in_smp). This works only if
ipc_rcu_alloc returns cacheline aligned pointers. vmalloc and kmalloc
return cacheline algined pointers, the implementation of ipc_rcu_alloc
breaks that.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: remove unused functions

We can now drop the msg_lock and msg_lock_check functions along with a
bogus comment introduced previously in semctl_down.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc,msg: shorten critical region in msgrcv

do_msgrcv() is the last msg queue function that abuses the ipc lock Take
it only when needed when actually updating msq.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc,msg: shorten critical region in msgsnd

do_msgsnd() is another function that does too many things with the ipc
object lock acquired. Take it only when needed when actually updating
msq.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc,msg: make msgctl_nolock lockless

While the INFO cmd doesn't take the ipc lock, the STAT commands do
acquire it unnecessarily. We can do the permissions and security checks
only holding the rcu lock.

This function now mimics semctl_nolock().

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc,msg: introduce lockless functions to obtain the ipc object

Add msq_obtain_object() and msq_obtain_object_check(), which will allow
us to get the ipc object without acquiring the lock. Just as with
semaphores, these functions are basically wrappers around
ipc_obtain_object*().

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc,msg: introduce msgctl_nolock

Similar to semctl, when calling msgctl, the *_INFO and *_STAT commands
can be performed without acquiring the ipc object.

Add a msgctl_nolock() function and move the logic of *_INFO and *_STAT
out of msgctl(). This change still takes the lock and it will be
properly lockless in the next patch

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc,msg: shorten critical region in msgctl_down

Instead of holding the ipc lock for the entire function, use the
ipcctl_pre_down_nolock and only acquire the lock for specific commands:
RMID and SET.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: move locking out of ipcctl_pre_down_nolock

This function currently acquires both the rw_mutex and the rcu lock on
successful lookups, leaving the callers to explicitly unlock them,
creating another two level locking situation.

Make the callers (including those that still use ipcctl_pre_down())
explicitly lock and unlock the rwsem and rcu lock.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: close open coded spin lock calls

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: introduce ipc object locking helpers

Simple helpers around the (kern_ipc_perm *)->lock spinlock.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: move rcu lock out of ipc_addid

This patchset continues the work that began in the sysv ipc semaphore
scaling series, see

  https://lkml.org/lkml/2013/3/20/546

Just like semaphores used to be, sysv shared memory and msg queues also
abuse the ipc lock, unnecessarily holding it for operations such as
permission and security checks.

This patchset mostly deals with mqueues, and while shared mem can be
done in a very similar way, I want to get these patches out in the open
first.  It also does some pending cleanups, mostly focused on the two
level locking we have in ipc code, taking care of ipc_addid() and
ipcctl_pre_down_nolock() - yes there are still functions that need to be
updated as well.

This patch:

Make all callers explicitly take and release the RCU read lock.

This addresses the two level locking seen in newary(), newseg() and
newqueue().  For the last two, explicitly unlock the ipc object and the
rcu lock, instead of calling the custom shm_unlock and msg_unlock
functions.  The next patch will deal with the open coded locking for
->perm.lock

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/shmc.c: eliminate ugly 80-col tricks

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/x86: flush_ptrace_hw_breakpoint() shoule clear the virtual debug registers

flush_ptrace_hw_breakpoint() destroys the counters set by ptrace, but
"leaks" ->debugreg6 and ->ptrace_dr7.

The problem is minor, but still it doesn't look right and flush_thread()
did this until commit 66cb59172959 ("hw-breakpoints: use the new wrapper
routines to access debug registers in process/thread code"). Now that
PTRACE_DETACH does flush_ too this makes even more sense.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace: PTRACE_DETACH should do flush_ptrace_hw_breakpoint(child)

Change ptrace_detach() to call flush_ptrace_hw_breakpoint(child). This
frees the slots for non-ptrace PERF_TYPE_BREAKPOINT users, and this
ensures that the tracee won't be killed by SIGTRAP triggered by the
active breakpoints.

Test-case:

unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len)
{
unsigned long dr7;

dr7 = ((len | type) & 0xf)
<< (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
if (enable)
dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));

return dr7;
}

int write_dr(int pid, int dr, unsigned long val)
{
return ptrace(PTRACE_POKEUSER, pid,
offsetof (struct user, u_debugreg[dr]),
val);
}

void func(void)
{
}

int main(void)
{
int pid, stat;
unsigned long dr7;

pid = fork();
if (!pid) {
assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
kill(getpid(), SIGHUP);

func();
return 0x13;
}

assert(pid == waitpid(-1, &stat, 0));
assert(WSTOPSIG(stat) == SIGHUP);

assert(write_dr(pid, 0, (long)func) == 0);
dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1);
assert(write_dr(pid, 7, dr7) == 0);

assert(ptrace(PTRACE_DETACH, pid, 0,0) == 0);
assert(pid == waitpid(-1, &stat, 0));
assert(stat == 0x1300);

return 0;
}

Before this patch the child is killed after PTRACE_DETACH.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/x86: cleanup ptrace_set_debugreg()

ptrace_set_debugreg() is trivial but looks horrible. Kill the unnecessary
goto's and return's to cleanup the code.

This matches ptrace_get_debugreg() which also needs the trivial whitespace
cleanups.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/x86: ptrace_write_dr7() should create bp if !disabled

Commit 24f1e32c60c4 ("hw-breakpoints: Rewrite the hw-breakpoints layer
on top of perf events") introduced the minor regression. Before this
commit

PTRACE_POKEUSER DR7, enableDR0
PTRACE_POKEUSER DR0, address

was perfectly valid, now PTRACE_POKEUSER(DR7) fails if DR0 was not
previously initialized by PTRACE_POKEUSER(DR0).

Change ptrace_write_dr7() to do ptrace_register_breakpoint(addr => 0) if
!bp && !disabled.

This fixes watchpoint-zeroaddr from ptrace-tests, see

https://bugzilla.redhat.com/show_bug.cgi?id=660204.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/x86: introduce ptrace_register_breakpoint()

No functional changes, preparation.

Extract the "register breakpoint" code from ptrace_get_debugreg() into
the new/generic helper, ptrace_register_breakpoint(). It will have more
users.

The patch also adds another simple helper, ptrace_fill_bp_fields(), to
factor out the arch_bp_generic_fields() logic in register/modify.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/x86: dont delay "disable" till second pass in ptrace_write_dr7()

ptrace_write_dr7() skips ptrace_modify_breakpoint(disabled => true)
unless second_pass, this buys nothing but complicates the code and means
that we always do the main loop twice even if "disabled" was never true.

The comment says:

Don't unregister the breakpoints right-away,
unless all register_user_hw_breakpoint()
requests have succeeded.

Firstly, we do not do register_user_hw_breakpoint(), it was removed by
commit 24f1e32c60c4 ("hw-breakpoints: Rewrite the hw-breakpoints layer
on top of perf events").

We are going to restore register_user_hw_breakpoint() (see the next
patch) but this doesn't matter: after commit 44234adcdce3
("hw-breakpoints: Modify breakpoints without unregistering them")
perf_event_disable() can not hurt, hw_breakpoint_del() does not free the
slot.

Remove the "second_pass" check from the main loop and simplify the code.
Since we have to check "bp != NULL" anyway, the patch also removes the
same check in ptrace_modify_breakpoint() and moves the comment into
ptrace_write_dr7().

With this patch the second pass is only needed to restore the saved
old_dr7. This should never fail, so the patch adds WARN_ON() to catch
the potential problems as Frederic suggested.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/x86: simplify the "disable" logic in ptrace_write_dr7()

ptrace_write_dr7() looks unnecessarily overcomplicated. We can factor
out ptrace_modify_breakpoint() and do not do "continue" twice, just we
need to pass the proper "disabled" argument to
ptrace_modify_breakpoint().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace: revert "Prepare to fix racy accesses on task breakpoints"

This reverts commit bf26c018490c ("Prepare to fix racy accesses on task
breakpoints").

The patch was fine but we can no longer race with SIGKILL after commit
9899d11f6544 ("ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL"), the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Now that ptrace_get_breakpoints/ptrace_put_breakpoints have no callers,
we can kill them and remove task->ptrace_bp_refcnt.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/sh: revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

This reverts commit e0ac8457d020 ("hw_breakpoints: Fix racy access to
ptrace breakpoints").

The patch was fine but we can no longer race with SIGKILL after commit
9899d11f6544 ("ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL"), the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/arm: revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

This reverts commit bf0b8f4b55e5 ("hw_breakpoints: Fix racy access to
ptrace breakpoints").

The patch was fine but we can no longer race with SIGKILL after commit
9899d11f6544 ("ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL"), the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/powerpc: revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

This reverts commit 07fa7a0a8a58 ("hw_breakpoints: Fix racy access to
ptrace breakpoints") and removes ptrace_get/put_breakpoints() added by
other commits.

The patch was fine but we can no longer race with SIGKILL after commit
9899d11f6544 ("ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL"), the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace/x86: revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

This reverts commit 87dc669ba257 ("hw_breakpoints: Fix racy access to
ptrace breakpoints").

The patch was fine but we can no longer race with SIGKILL after commit
9899d11f6544 ("ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL"), the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

The patch only removes ptrace_get_breakpoints/ptrace_put_breakpoints and
does a couple of "while at it" cleanups, it doesn't remove other changes
from the reverted commit.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fatfs: add FAT_IOCTL_GET_VOLUME_ID

This patch, originally from Android kernel, adds vfat ioctl command
FAT_IOCTL_GET_VOLUME_ID, with this command we can get the vfat volume ID
using following code:

ioctl(fd, FAT_IOCTL_GET_VOLUME_ID, &volume_ID)

This patch is a modified version of the patch by Mike Lockwood, with
changes from Dmitry Pervushin, who noticed the original patch makes some
volume IDs abiguous with error returns: for example, if volume id is
0xFFFFFDAD, that matches -ENOIOCTLCMD, we get "FFFFFFFF" from the user
space.

So add a parameter to ioctl to get the correct volume ID.

Android uses vfat volume ID to identify different sd card, when a new sd
card is inserted to device, android can scan the media on it and pop up
new contents.

Signed-off-by: Bintian Wang <bintian.wang@linaro.org>
Cc: dmitry pervushin <dpervushin@gmail.com>
Cc: Mike Lockwood <lockwood@android.com>
Cc: Colin Cross <ccross@android.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sean McNeil <sean@mcneil.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-stmp3xxx.c: check the return value from stmp_reset_block()

stmp_reset_block() may fail, so let's check its return value and
propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ncpfs: fix error return code in ncp_parse_options()

Fix to return -EINVAL from the option parse error handling case instead
of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: make the CamelCase cache work for non-git trees too

Might as well check include timestamps and cache the include file
CamelCase uses for the non-git case too.

The camelcase cache file is now named:

for git: .checkpatch-camelcase.git.<commit_id>
for non-git: .checkpatch-camelcase.date.<YYYYMMDDhhmm>

All .checkpatch-camelcase* files are deleted if not current.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: add cpu/pid to warn_slowpath_common in WARNING printk()s

Add the cpu/pid that called WARN() so that the stack traces can be
matched up with the WARNING messages.

[akpm@linux-foundation.org: remove stray quote]
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Reviewed-by: Robin Holt <holt@sgi.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Vikram Mulukutla <markivx@codeaurora.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug.c: fix return value of online_pages()

online_pages() is called from memory_block_action() when a user requests
to online a memory block via sysfs. This function needs to return a
proper error value in case of error.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: honor min_free_kbytes set by user

min_free_kbytes is updated during memory hotplug (by
init_per_zone_wmark_min) currently which is right thing to do in most
cases but this could be unexpected if admin increased the value to
prevent from allocation failures and the new min_free_kbytes would be
decreased as a result of memory hotadd.

This patch saves the user defined value and allows updating
min_free_kbytes only if it is higher than the saved one.

A warning is printed when the new value is ignored.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: don't need to free memcg via RCU or workqueue

Now memcg has the same life cycle with its corresponding cgroup, and a
cgroup is freed via RCU and then mem_cgroup_css_free() will be called in
a work function, so we can simply call __mem_cgroup_free() in
mem_cgroup_css_free().

This actually reverts commit 59927fb984d ("memcg: free mem_cgroup by RCU
to fix oops").

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: kill memcg refcnt

Now memcg has the same life cycle as its corresponding cgroup. Kill the
useless refcnt.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: don't need to get a reference to the parent

The cgroup core guarantees it's always safe to access the parent.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: use css_get/put for swap memcg

Use css_get/put instead of mem_cgroup_get/put. A simple replacement
will do.

The historical reason that memcg has its own refcnt instead of always
using css_get/put, is that cgroup couldn't be removed if there're still
css refs, so css refs can't be used as long-lived reference. The
situation has changed so that rmdir a cgroup will succeed regardless css
refs, but won't be freed until css refs goes down to 0.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: use css_get/put when charging/uncharging kmem

Use css_get/put instead of mem_cgroup_get/put.

We can't do a simple replacement, because here mem_cgroup_put() is
called during mem_cgroup_css_free(), while mem_cgroup_css_free() won't
be called until css refcnt goes down to 0.

Instead we increment css refcnt in mem_cgroup_css_offline(), and then
check if there's still kmem charges. If not, css refcnt will be
decremented immediately, otherwise the refcnt will be released after the
last kmem allocation is uncahred.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: don't use mem_cgroup_get() when creating a kmemcg cache

Use css_get()/css_put() instead of mem_cgroup_get()/mem_cgroup_put().

There are two things being done in the current code:

First, we acquired a css_ref to make sure that the underlying cgroup
would not go away.  That is a short lived reference, and it is put as
soon as the cache is created.

At this point, we acquire a long-lived per-cache memcg reference count
to guarantee that the memcg will still be alive.

so it is:

  enqueue: css_get
  create : memcg_get, css_put
  destroy: memcg_put

So we only need to get rid of the memcg_get, change the memcg_put to
css_put, and get rid of the now extra css_put.

(This changelog is mostly written by Glauber)

Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: use css_get() in sock_update_memcg()

Use css_get/css_put instead of mem_cgroup_get/put.

Note, if at the same time someone is moving @current to a different
cgroup and removing the old cgroup, css_tryget() may return false, and
sock->sk_cgrp won't be initialized, which is fine.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg, kmem: fix reference count handling on the error path

mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails.
This is not correct because only memcg_propagate_kmem takes an
additional reference while mem_cgroup_sockets_init is allowed to fail as
well (although no current implementation fails) but it doesn't take any
reference. This all suggests that it should be memcg_propagate_kmem
that should clean up after itself so this patch moves mem_cgroup_put
over there.

Unfortunately this is not that easy (as pointed out by Li Zefan) because
memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is
marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if
memcg_propagate_kmem fails so the additional reference is dropped in
that case in kmem_cgroup_destroy which means that the reference would be
dropped two times.

The easiest way then would be to simply remove mem_cgrroup_put from
mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right
thing.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [3.8]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "memcg: avoid dangling reference count in creation failure"

This reverts commit e4715f01be697a.

mem_cgroup_put is hierarchy aware so mem_cgroup_put(memcg) already drops
an additional reference from all parents so the additional
mem_cgrroup_put(parent) potentially causes use-after-free.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [3.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap: allow MAP_HUGETLB for hugetlbfs files v2

It is counterintuitive at best that mmap'ing a hugetlbfs file with
MAP_HUGETLB fails, while mmap'ing it without will a) succeed and b)
return huge pages.

v2: use is_file_hugepages(), as suggested by Jianguo

Signed-off-by: Joern Engel <joern@logfs.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: do not scale writeback pages when deciding whether to set ZONE_WRITEBACK

After the patch "mm: vmscan: Flatten kswapd priority loop" was merged
the scanning priority of kswapd changed.

The priority now rises until it is scanning enough pages to meet the
high watermark.  shrink_inactive_list sets ZONE_WRITEBACK if a number of
pages were encountered under writeback but this value is scaled based on
the priority.  As kswapd frequently scans with a higher priority now it
is relatively easy to set ZONE_WRITEBACK.  This patch removes the
scaling and treates writeback pages similar to how it treats unqueued
dirty pages and congested pages.  The user-visible effect should be that
kswapd will writeback fewer pages from reclaim context.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: do not continue scanning if reclaim was aborted for compaction

Direct reclaim is not aborting to allow compaction to go ahead properly.
do_try_to_free_pages is told to abort reclaim which is happily ignores
and instead increases priority instead until it reaches 0 and starts
shrinking file/anon equally. This patch corrects the situation by
aborting reclaim when requested instead of raising priority.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug.c: fix a comment typo in register_page_bootmem_info_node()

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memblock.c: fix wrong comment in __next_free_mem_range()

Remove one redundant "nid" in the comment.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page migration: fix wrong comment in address_space_operations.migratepage()

There is no parameter "sync" in address_space_operations->migratepage().
It should be migrate_mode. And the comment is for MIGRATE_ASYNC.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: fix an overflow bug in alloc_vmap_area()

When searching a vmap area in the vmalloc space, we use (addr + size -
1) to check if the value is less than addr, which is an overflow.  But
we assign (addr + size) to vmap_area->va_end.

So if we come across the below case:

  (addr + size - 1) : not overflow
  (addr + size)     : overflow

we will assign an overflow value (e.g 0) to vmap_area->va_end, And this
will trigger BUG in __insert_vmap_area, causing system panic.

So using (addr + size) to check the overflow should be the correct
behaviour, not (addr + size - 1).

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reported-by: Ghennadi Procopciuc <unix140@gmail.com>
Tested-by: Daniel Baluta <dbaluta@ixiacom.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove unused VM_<READfoo> macros and expand other in-place

These VM_<READfoo> macros aren't used very often and three of them
aren't used at all.

Expand the ones that are used in-place, and remove all the now unused
#define VM_<foo> macros.

VM_READHINTMASK, VM_NormalReadHint and VM_ClearReadHint were added just
before 2.4 and appears have never been used.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/pgtable: don't accumulate addr during pgd prepopulate pmd

The old codes accumulate addr to get right pmd, however, currently pmds
are preallocated and transfered as a parameter, there is unnecessary to
accumulate addr variable any more, this patch remove it.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: fix doc for transparent huge zero page

Transparent huge zero page is used during the page fault instead of in
khugepaged.

  # ls /sys/kernel/mm/transparent_hugepage/
  defrag  enabled  khugepaged  use_zero_page
  # ls /sys/kernel/mm/transparent_hugepage/khugepaged/
  alloc_sleep_millisecs  defrag  full_scans  max_ptes_none  pages_collapsed  pages_to_scan  scan_sleep_millisecs

This patch corrects the documentation just like the codes done.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc: fix doc for numa_zonelist_order

The default zonelist order selecter will select "node" order if any nodes
DMA zone comprises greater than 70% of its local memory instead of 60%,
according to default_zonelist_order::low_kmem_size > total * 70/100.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/writeback: commit reason of WB_REASON_FORKER_THREAD mismatch name

After commit 839a8e8660b6 ("writeback: replace custom worker pool
implementation with unbound workqueue"), there is no bdi forker thread
any more. However, WB_REASON_FORKER_THREAD is still used due to it is
TPs userland visible and we won't be exposing exactly the same
information with just a different name.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/writeback: don't check force_wait to handle bdi->work_list

After commit 839a8e8660b6 ("writeback: replace custom worker pool
implementation with unbound workqueue"), bdi_writeback_workfn runs off
bdi_writeback->dwork, on each execution, it processes bdi->work_list and
reschedules if there are more things to do instead of flush any work
that race with us existing. It is unecessary to check force_wait in
wb_do_writeback since it is always 0 after the mentioned commit. This
patch remove the force_wait in wb_do_writeback.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/writeback: remove wb_reason_name

wb_reason_name is not used any more - remove it.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/fs-writeback.c: : make wb_do_writeback() as static

It's not used globally and could be static.

Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/sparse.c: put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE

With CONFIG_MEMORY_HOTREMOVE unset, there is a compile warning:

mm/sparse.c:755: warning: `clear_hwpoisoned_pages' defined but not used

And Bisecting it ended up pointing to 4edd7ceff ("mm, hotplug: avoid
compiling memory hotremove functions when disabled").

This is because the commit above put sparse_remove_one_section() within
the protection of CONFIG_MEMORY_HOTREMOVE but the only user of
clear_hwpoisoned_pages() is sparse_remove_one_section(), and it is not
within the protection of CONFIG_MEMORY_HOTREMOVE.

So put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE should fix
the warning.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove unused __put_page()

This function is nowhere used, and it has a confusing name with put_page
in mm/swap.c. So better to remove it.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfree: don't schedule free_work() if llist_add() returns false

vfree() only needs schedule_work(&p->wq) if p->list was empty, otherwise
vfree_deferred->wq is already pending or it is running and didn't do
llist_del_all() yet.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: remove unlikely() from the current_order test

In __rmqueue_fallback(), current_order loops down from MAX_ORDER - 1 to
the order passed.  MAX_ORDER is typically 11 and pageblock_order is
typically 9 on x86.  Integer division truncates, so pageblock_order / 2
is 4.  For the first eight iterations, it's guaranteed that
current_order >= pageblock_order / 2 if it even gets that far!

So just remove the unlikely(), it's completely bogus.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove unused functions is_{normal_idx, normal, dma32, dma}

These functions are nowhere used, so remove them.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: remove zone_type argument of build_zonelists_node

The callers of build_zonelists_node always pass MAX_NR_ZONES -1 as the
zone_type argument, so we can directly use the value in
build_zonelists_node and remove zone_type argument.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add zswap and zbud maintainer

Add maintainer information for zswap and zbud into the MAINTAINERS file.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/gfp.h: fix the comment for GFP_ZONE_TABLE

0xc just means MOVABLE + DMA32, which results in zone DMA32.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: do not account memory used for cache creation

The memory we used to hold the memcg arrays is currently accounted to
the current memcg.  But that creates a problem, because that memory can
only be freed after the last user is gone.  Our only way to know which
is the last user, is to hook up to freeing time, but the fact that we
still have some in flight kmallocs will prevent freeing to happen.  I
believe therefore to be just easier to account this memory as global
overhead.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: also test for skip accounting at the page allocation level

The memory we used to hold the memcg arrays is currently accounted to
the current memcg.  But that creates a problem, because that memory can
only be freed after the last user is gone.  Our only way to know which
is the last user, is to hook up to freeing time, but the fact that we
still have some in flight kmallocs will prevent freeing to happen.  I
believe therefore to be just easier to account this memory as global
overhead.

This patch (of 2):

Disabling accounting is only relevant for some specific memcg internal
allocations.  Therefore we would initially not have such check at
memcg_kmem_newpage_charge, since direct calls to the page allocator that
are marked with GFP_KMEMCG only happen outside memcg core.  We are
mostly concerned with cache allocations and by having this test at
memcg_kmem_get_cache we are already able to relay the allocation to the
root cache and bypass the memcg caches altogether.

There is one exception, though: the SLUB allocator does not create large
order caches, but rather service large kmallocs directly from the page
allocator.  Therefore, the following sequence, when backed by the SLUB
allocator:

memcg_stop_kmem_account();
kmalloc(<large_number>)
memcg_resume_kmem_account();

would effectively ignore the fact that we should skip accounting, since
it will drive us directly to this function without passing through the
cache selector memcg_kmem_get_cache.  Such large allocations are
extremely rare but can happen, for instance, for the cache arrays.

This was never a problem in practice, because we weren't skipping
accounting for the cache arrays.  All the allocations we were skipping
were fairly small.  However, the fact that we were not skipping those
allocations are a problem and can prevent the memcgs from going away.
As we fix that, we need to make sure that the fix will also work with
the SLUB allocator.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Reported-by: Michal Hocko <mhocko@suze.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: check VM_UNINITIALIZED flag in s_show instead of show_numa_info

We should check the VM_UNITIALIZED flag in s_show(). If this flag is
set, that said, the vm_struct is not fully initialized. So it is
unnecessary to try to show the information contained in vm_struct.

We checked this flag in show_numa_info(), but I think it's better to
check it earlier.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: rename VM_UNLIST to VM_UNINITIALIZED

VM_UNLIST was used to indicate that the vm_struct is not listed in
vmlist.

But after commit 4341fa454796 ("mm, vmalloc: remove list management of
vmlist after initializing vmalloc"), the meaning of this flag changed.
It now means the vm_struct is not fully initialized. So renaming it to
VM_UNINITIALIZED seems more reasonable.

Also change clear_vm_unlist to clear_vm_uninitialized_flag.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: emit the failure message before return

Use goto to jump to the fail label to give a failure message before
returning NULL. This makes the failure handling in this function
consistent.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: remove alloc_map from vmap_block

As we have removed the dead code in the vb_alloc, it seems there is no
place to use the alloc_map. So there is no reason to maintain the
alloc_map in vmap_block.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: remove unused purge_fragmented_blocks_thiscpu

This function is nowhere used now, so remove it.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: remove dead code in vb_alloc

Space in a vmap block that was once allocated is considered dirty and
not made available for allocation again before the whole block is
recycled.  The result is that free space within a vmap block is always
contiguous.

So if a vmap block has enough free space for allocation, the allocation
is impossible to fail.  Thus, the fragmented block purging was never
invoked from vb_alloc().  So remove this dead code.

[ Same patches also sent by:

    Chanho Min <chanho.min@lge.com>
    Johannes Weiner <hannes@cmpxchg.org>

  but git doesn't do "multiple authors" ]

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: unbreak __vunmap()

There is an extra semi-colon so the function always returns.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove duplicated call of get_pfn_range_for_nid

When calculating pages in a node, for each zone in that node, we will
have

  zone_spanned_pages_in_node
    --> get_pfn_range_for_nid
  zone_absent_pages_in_node
    --> get_pfn_range_for_nid

That is to say, we call the get_pfn_range_for_nid to get start_pfn and
end_pfn of the node for MAX_NR_ZONES * 2 times.  And this is totally
unnecessary if we call the get_pfn_range_for_nid before
zone_*_pages_in_node add two extra arguments node_start_pfn and
node_end_pfn for zone_*_pages_in_node, then we can remove the
get_pfn_range_in_node in zone_*_pages_in_node.

[akpm@linux-foundation.org: make definitions more readable]
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: invoke oom-killer from remaining unconverted page fault handlers

A few remaining architectures directly kill the page faulting task in an
out of memory situation. This is usually not a good idea since that
task might not even use a significant amount of memory and so may not be
the optimal victim to resolve the situation.

Since 2.6.29's 1c0fe6e ("mm: invoke oom-killer from page fault") there
is a hook that architecture page fault handlers are supposed to call to
invoke the OOM killer and let it pick the right task to kill. Convert
the remaining architectures over to this hook.

To have the previous behavior of simply taking out the faulting task the
vm.oom_kill_allocating_task sysctl can be set to 1.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc bits]
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: clean up memcg->nodeinfo

Remove struct mem_cgroup_lru_info and fold its single member, the
variably sized nodeinfo[0], directly into struct mem_cgroup. This
should make it more obvious why it has to be the last member there.

Also move the comment that's above that special last member below it, so
it is more visible to somebody that considers appending to the struct
mem_cgroup.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mremap: validate input before taking lock

This patch is very similar to commit 84d96d897671 ("mm: madvise:
complete input validation before taking lock"): perform some basic
validation of the input to mremap() before taking the
&current->mm->mmap_sem lock.

This also makes the MREMAP_FIXED => MREMAP_MAYMOVE dependency slightly
more explicit.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/iommu/msm_iommu_dev.c: fix leak and clean up error paths

Fix two obvious problems:

1. We have registered msm_iommu_driver first, and need unregister it
when registered msm_iommu_ctx_driver fail

2. We don't need to kfree drvdata before kzalloc was successful.

[akpm@linux-foundation.org: remove now-unneeded initialization of ctx_drvdata, remove unneeded braces]
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fsnotify: update comments concerning locking scheme

There have been changes in the locking scheme of fsnotify but the
comments in the source code have not been updated yet. This patch
corrects this.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

inotify: fix race when adding a new watch

In inotify_new_watch() the number of watches for a group is compared
against the max number of allowed watches and increased afterwards. The
check and incrementation is not done atomically, so it is possible for
multiple concurrent threads to pass the check and increment the number
of marks above the allowed max.

This patch uses an inotify groups mark_lock to ensure that both check
and incrementation are done atomic. Furthermore we dont have to worry
about the race that allows a concurrent thread to add a watch just after
inotify_update_existing_watch() returned with -ENOENT anymore, since
this is also synchronized by the groups mark mutex now.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dnotify: replace dnotify_mark_mutex with mark mutex of dnotify_group

There is no need to use a special mutex to protect against the
fcntl/close race (see dnotify.c for a description of this race).
Instead the dnotify_groups mark mutex can be used.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fanotify: put duplicate code for adding vfsmount/inode marks into an own function

The code under the groups mark_mutex in fanotify_add_inode_mark() and
fanotify_add_vfsmount_mark() is almost identical. So put it into a
seperate function.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fanotify: fix races when adding/removing marks

For both adding an event to an existing mark and destroying a mark we
first have to find it via fsnotify_find_[inode|vfsmount]_mark().  But
getting the mark and adding an event (or destroying it) is not done
atomically.  This opens a race where a thread is about to destroy a mark
while another thread still finds the same mark and adds an event to its
mask although it will be destroyed.

Another race exists concerning the excess of a groups number of marks
limit: When a mark is added the number of group marks is checked against
the max number of marks per group and increased afterwards.  Since check
and increment is also not done atomically, this may result in 2 or more
processes passing the check at the same time and increasing the number
of group marks above the allowed limit.

With this patch both races are avoided by doing the concerning
operations with the groups mark mutex locked.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fanotify: info leak in copy_event_to_user()

The ->reserved field isn't cleared so we leak one byte of stack
information to userspace.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

audit: Fix decimal constant description

Use proper decimal type for comparison with u32.

Compilation warning was introduced by 780a7654 ("audit: Make testing for
a valid loginuid explicit.")

  kernel/auditfilter.c: In function 'audit_data_to_entry':
  kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
     if ((f->type == AUDIT_LOGINUID) && (f->val == 4294967295)) {

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/auditfilter.c: fix leak in audit_add_rule() error path

If both 'tree' and 'watch' are valid we must call audit_put_tree(), just
like the preceding code within audit_add_rule().

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/auditfilter.c: fixing build warning

kernel/auditfilter.c:426: warning: this decimal constant is unsigned only in ISO C90

Signed-off-by: Raphael S. Carvalho <raphael.scarv@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record

The old audit PATH records for mq_open looked like this:

  type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023

...with the audit related changes that went into 3.7, they now look like this:

  type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"

Both of these look wrong to me.  As Steve Grubb pointed out:

"What we need is 1 PATH record that identifies the MQ.  The other PATH
  records probably should not be there."

Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting.  With this change, we get
a single PATH record that looks more like this:

  type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
  dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
  obj=unconfined_u:object_r:user_tmpfs_t:s0

In order to do this, a new audit_inode_parent_hidden() function is
added.  If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/dma/iop-adma.c: fix new warnings

The recent "drivers/dma: remove unused support for MEMSET operations"
change has fallout from lack of build testing by the author.  This
fixes:

  drivers/dma/iop-adma.c:1020:13: warning: unused variable 'dma_addr' [-Wunused-variable]
  drivers/dma/iop-adma.c:1519:2: warning: format '%s' expects a matching 'char *' argument [-Wformat=]

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
"Once you have some time from extended weekend celebrations please
  consider pulling the following to get:
   - Various fixes and PCI driver for dw_dmac by Andy
   - DT binding for imx-dma by Markus & imx-sdma by Shawn
   - DT fixes for dmaengine by Lars
   - jz4740 dmac driver by Lars
   - and various fixes across the drivers"

What "extended weekend celebrations"?  I'm in the merge window, who has
time for extended celebrations..

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
  DMA: shdma: add DT support
  DMA: shdma: shdma_chan_filter() has to be in shdma-base.h
  DMA: shdma: (cosmetic) don't re-calculate a pointer
  dmaengine: at_hdmac: prepare clk before calling enable
  dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
  dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
  dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
  ARM: at91: dt: add header to define at_hdmac configuration
  MIPS: jz4740: Correct clock gate bit for DMA controller
  MIPS: jz4740: Remove custom DMA API
  MIPS: jz4740: Register jz4740 DMA device
  dma: Add a jz4740 dmaengine driver
  MIPS: jz4740: Acquire and enable DMA controller clock
  dma: mmp_tdma: disable irq when disabling dma channel
  dmaengine: PL08x: Avoid collisions with get_signal() macro
  dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
  dma: dw: add PCI part of the driver
  dma: dw: split driver to library part and platform code
  dma: move dw_dmac driver to an own directory
  dw_dmac: don't check resource with devm_ioremap_resource
  ...

Merge branch 'cpuinit-delete' of git://git./linux/kernel/git/paulg/linux

Pull first stage of __cpuinit removal from Paul Gortmaker:
"The two commits here 1) dummy out all the __cpuinit macros so that we
  no longer generate such sections, and then 2) remove all the section
  processing that we used to do for those sections.

  This makes all the __cpuinit and friends no-ops, so that we can remove
  the use cases of it at our leisure.  Expect stage 2, which does the
  tree wide removal sweep at the end of the merge window."

* 'cpuinit-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  modpost: remove all traces of cpuinit/cpuexit sections
  init.h: remove __cpuinit sections from the kernel

Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer core updates from Thomas Gleixner:
"The timer changes contain:

   - posix timer code consolidation and fixes for odd corner cases

   - sched_clock implementation moved from ARM to core code to avoid
     duplication by other architectures

   - alarm timer updates

   - clocksource and clockevents unregistration facilities

   - clocksource/events support for new hardware

   - precise nanoseconds RTC readout (Xen feature)

   - generic support for Xen suspend/resume oddities

   - the usual lot of fixes and cleanups all over the place

  The parts which touch other areas (ARM/XEN) have been coordinated with
  the relevant maintainers.  Though this results in an handful of
  trivial to solve merge conflicts, which we preferred over nasty cross
  tree merge dependencies.

  The patches which have been committed in the last few days are bug
  fixes plus the posix timer lot.  The latter was in akpms queue and
  next for quite some time; they just got forgotten and Frederic
  collected them last minute."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  hrtimer: Remove unused variable
  hrtimers: Move SMP function call to thread context
  clocksource: Reselect clocksource when watchdog validated high-res capability
  posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
  posix_timers: fix racy timer delta caching on task exit
  posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
  selftests: add basic posix timers selftests
  posix_cpu_timers: consolidate expired timers check
  posix_cpu_timers: consolidate timer list cleanups
  posix_cpu_timer: consolidate expiry time type
  tick: Sanitize broadcast control logic
  tick: Prevent uncontrolled switch to oneshot mode
  tick: Make oneshot broadcast robust vs. CPU offlining
  x86: xen: Sync the CMOS RTC as well as the Xen wallclock
  x86: xen: Sync the wallclock when the system time is set
  timekeeping: Indicate that clock was set in the pvclock gtod notifier
  timekeeping: Pass flags instead of multiple bools to timekeeping_update()
  xen: Remove clock_was_set() call in the resume path
  hrtimers: Support resuming with two or more CPUs online (but stopped)
  timer: Fix jiffies wrap behavior of round_jiffies_common()
  ...

Merge branch 'for-v3.11' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull ARM DMA mapping updates from Marek Szyprowski:
"This contains important bugfixes and an update for IOMMU integration
  support for ARM architecture"

* 'for-v3.11' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma: Drop __GFP_COMP for iommu dma memory allocations
  ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean
  ARM: dma-mapping: NULLify dev->archdata.mapping pointer on detach
  ARM: dma-mapping: convert DMA direction into IOMMU protection attributes
  ARM: dma-mapping: Get pages if the cpu_addr is out of atomic_pool