GitHub/mt8127/android_kernel_alcatel_ttab.git
18 years ago[PATCH] powerpc: restore eeh_add_device_late() prototype stub
Mark Fasheh [Wed, 8 Mar 2006 05:55:20 +0000 (21:55 -0800)]
[PATCH] powerpc: restore eeh_add_device_late() prototype stub

We fixed this:

arch/powerpc/platforms/pseries/eeh.c: In function `eeh_add_device_tree_late':
arch/powerpc/platforms/pseries/eeh.c:901: warning: implicit declaration of function `eeh_add_device_late'
arch/powerpc/platforms/pseries/eeh.c: At top level:
arch/powerpc/platforms/pseries/eeh.c:918: error: conflicting types for 'eeh_add_device_late'
arch/powerpc/platforms/pseries/eeh.c:901: error: previous implicit declaration of 'eeh_add_device_late' was here
make[2]: *** [arch/powerpc/platforms/pseries/eeh.o] Error 1

But we forgot the !CONFIG_EEH stub.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMark the pipe file operations static
Linus Torvalds [Wed, 8 Mar 2006 22:03:09 +0000 (14:03 -0800)]
Mark the pipe file operations static

They aren't used (nor even really usable) outside of pipe.c anyway

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Wed, 8 Mar 2006 21:20:46 +0000 (13:20 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] mca recovery return value when no bus check
  [IA64] SGI SN drivers: don't report !sn2 hardware as an error
  [IA64] don't report !sn2 or !summit hardware as an error
  [IA64] gensparse_defconfig: turn on PNPACPI
  [IA64] Increase severity of MCA recovery messages

18 years agoslab: fix calculate_slab_order() for SLAB_RECLAIM_ACCOUNT
Linus Torvalds [Wed, 8 Mar 2006 18:33:05 +0000 (10:33 -0800)]
slab: fix calculate_slab_order() for SLAB_RECLAIM_ACCOUNT

Instead of having a hard-to-read and confusing conditional in the
caller, just make the slab order calculation handle this special case,
since it's simple and obvious there.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Wed, 8 Mar 2006 02:04:54 +0000 (18:04 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] ip22zilog: Fix oops on runlevel change with serial console
  [SERIAL] Fix two bugs in parport_serial

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 8 Mar 2006 02:02:16 +0000 (18:02 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3353/1: NAS100d: protect  nas100d_power_exit() with machine_is_nas100d()
  [ARM] 3352/1: DSB required for the completion of a TLB maintenance operation

18 years ago[IA64] mca recovery return value when no bus check
Russ Anderson [Fri, 3 Mar 2006 22:42:26 +0000 (16:42 -0600)]
[IA64] mca recovery return value when no bus check

When there is no bus check, the return code should be failure, not success.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years ago[IA64] SGI SN drivers: don't report !sn2 hardware as an error
Bjorn Helgaas [Fri, 3 Mar 2006 22:34:34 +0000 (15:34 -0700)]
[IA64] SGI SN drivers: don't report !sn2 hardware as an error

This stuff is all in the generic ia64 kernel, and the new initcall error
reporting complains about them.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years ago[IA64] don't report !sn2 or !summit hardware as an error
Bjorn Helgaas [Fri, 3 Mar 2006 22:33:47 +0000 (15:33 -0700)]
[IA64] don't report !sn2 or !summit hardware as an error

This stuff is all in the generic ia64 kernel, and the new initcall error
reporting complains about them.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years ago[IA64] gensparse_defconfig: turn on PNPACPI
Bjorn Helgaas [Thu, 2 Mar 2006 23:59:50 +0000 (16:59 -0700)]
[IA64] gensparse_defconfig: turn on PNPACPI

Turn on CONFIG_PNPACPI.  I recently removed 8250_acpi.c.  All devices
previously claimed by 8250_acpi.c should now be claimed by 8250_pnp.c.
This depends on having CONFIG_PNPACPI so ACPI devices show up as PNP
devices.

All other ia64 defconfigs either have CONFIG_PNPACPI already, or
don't have 8250 support turned on at all.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years ago[IA64] Increase severity of MCA recovery messages
Russ Anderson [Tue, 7 Mar 2006 23:23:25 +0000 (15:23 -0800)]
[IA64] Increase severity of MCA recovery messages

The MCA recovery messages are currently KERN_DEBUG,
so they don't show up in /var/log/messages (by default).
Increase the severity to KERN_ERR, for the initial
message (and also add the physical address to this
message). Leave the successful isolation message as
KERN_DEBUG, but increase the severity when isolation
fails to KERN_CRIT.

[Russ' patch made these all KERN_CRIT]

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years ago[NETFILTER] ip_queue: Fix wrong skb->len == nlmsg_len assumption
Thomas Graf [Tue, 7 Mar 2006 22:56:12 +0000 (14:56 -0800)]
[NETFILTER] ip_queue: Fix wrong skb->len == nlmsg_len assumption

The size of the skb carrying the netlink message is not
equivalent to the length of the actual netlink message
due to padding. ip_queue matches the length of the payload
against the original packet size to determine if packet
mangling is desired, due to the above wrong assumption
arbitary packets may not be mangled depening on their
original size.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[ARM] 3353/1: NAS100d: protect nas100d_power_exit() with machine_is_nas100d()
Alessandro Zummo [Tue, 7 Mar 2006 22:48:29 +0000 (22:48 +0000)]
[ARM] 3353/1: NAS100d: protect  nas100d_power_exit() with machine_is_nas100d()

Patch from Alessandro Zummo

nas100d_power_exit(void) gets some protection
to avoid freeing an irq when it is not appropriate to do so.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[SERIAL] ip22zilog: Fix oops on runlevel change with serial console
Martin Michlmayr [Tue, 7 Mar 2006 21:04:59 +0000 (21:04 +0000)]
[SERIAL] ip22zilog: Fix oops on runlevel change with serial console

Incorrect uart_write_wakeup() calls cause reference to a NULL tty
pointer.  This has been fixed in the sunsab and sunzilog serial drivers
in October 2005.  Update the ip22zilog, which is based on sunzilog,
accordingly.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 7 Mar 2006 18:29:54 +0000 (10:29 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Add DMA address workaround

18 years agoSimplify fifo_open() locking logic
Linus Torvalds [Tue, 7 Mar 2006 17:16:35 +0000 (09:16 -0800)]
Simplify fifo_open() locking logic

We don't do interruptible waits for the pipe mutex anywhere else any
more either, so don't do it in fifo_open() either.

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[ARM] 3352/1: DSB required for the completion of a TLB maintenance operation
Catalin Marinas [Tue, 7 Mar 2006 14:42:27 +0000 (14:42 +0000)]
[ARM] 3352/1: DSB required for the completion of a TLB maintenance operation

Patch from Catalin Marinas

Chapter B2.7.3 in the latest ARM ARM (with v6 information) states that
the completion of a TLB maintenance operation is only guaranteed by
the execution of a DSB (Data Syncronization Barrier, formerly Data
Write Barrier or Drain Write Buffer).

Note that a DSB is only needed in the flush_tlb_kernel_* functions
since the completion is guaranteed by a mode change (i.e. switching
back to user mode) for the flush_tlb_user_* functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[TG3]: Add DMA address workaround
Michael Chan [Tue, 7 Mar 2006 03:28:35 +0000 (19:28 -0800)]
[TG3]: Add DMA address workaround

Add DMA workaround for chips that do not support full 64-bit DMA
addresses.

5714, 5715, and 5780 chips only support DMA addresses less than 40
bits. On 64-bit systems with IOMMU, set the dma_mask to 40-bit so
that pci_map_xxx() calls will map the DMA address below 40 bits if
necessary. On 64-bit systems without IOMMU, set the dma_mask to
64-bit and check for DMA addresses exceeding the limit in
tg3_start_xmit().

5788 only supports 32-bit DMA so need to set the mask appropriately
also.

Thanks to Chris Elmquist at SGI for reporting and helping to debug
the problem on 5714.

Thanks to David Miller for explaining the HIGHMEM and DMA stuff.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Tue, 7 Mar 2006 02:47:07 +0000 (18:47 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/srp: Don't send task management commands after target removal

18 years ago[PATCH] s390: improve response code handling in chsc_enable_facility()
Cornelia Huck [Mon, 6 Mar 2006 23:43:02 +0000 (15:43 -0800)]
[PATCH] s390: improve response code handling in chsc_enable_facility()

Rather than checking for some known failures, check positively for the
success response code 0x0001 and return -EIO for unrecognized failure
response codes.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Greg Smith <gsmith@nc.rr.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] s390: fix match in ccw modalias
Bastian Blank [Mon, 6 Mar 2006 23:43:00 +0000 (15:43 -0800)]
[PATCH] s390: fix match in ccw modalias

Fix matching of devmodel in modaliases.  It breaks automatic loading of any
dasd module.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] windfarm license fix
Benjamin Herrenschmidt [Mon, 6 Mar 2006 23:42:59 +0000 (15:42 -0800)]
[PATCH] windfarm license fix

The Windfarm PID module lacks a licence, it should be GPL, here it is

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] smaps: shared fix
Nick Piggin [Mon, 6 Mar 2006 23:42:58 +0000 (15:42 -0800)]
[PATCH] smaps: shared fix

The point of the smaps "shared" is to count the number of pages that are
mapped by more than one process, according to Mauricio Lin.  However, smaps
uses page_count for this, so it will return a false positive for every page
that is mapped by just that one process, which is also in pagecache or
swapcache.  There are false positive situations for anonymous pages not in
swapcache as well: - page reclaim, migration - get_user_pages (eg.
direct-io, ptrace)

Use page_mapcount instead, to count the number of mappings to the page.

Use vm_normal_page so that weird things like /dev/mem aren't counted either.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] smaps: hugepages fix
Nick Piggin [Mon, 6 Mar 2006 23:42:57 +0000 (15:42 -0800)]
[PATCH] smaps: hugepages fix

smaps doesn't have a hugepage pagetable walker. Skip walking hugepage
vmas.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] ramfs needs to update directory m/ctime on symlink
Peter Staubach [Mon, 6 Mar 2006 23:42:56 +0000 (15:42 -0800)]
[PATCH] ramfs needs to update directory m/ctime on symlink

ramfs neglects to update the directory mtime and ctime fields when creating
a new symbolic link.  Ramfs was modified in 2.6.15 to update these fields
when other types of entries are created.  The symlink support is separate
from that other support, so that change did not cover quite all of the
possibilities.

All of the directory content manipulation entry points now seem to be
covered with respect to these time field updates.

Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] EFI: Fix gdt load
Edgar Hucek [Mon, 6 Mar 2006 23:42:54 +0000 (15:42 -0800)]
[PATCH] EFI: Fix gdt load

This patch makes the kernel bootable again on ia32 EFI systems.

Signed-off-by: Edgar Hucek <hostmaster@ed-soft.at>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] numa_maps update
Christoph Lameter [Mon, 6 Mar 2006 23:42:53 +0000 (15:42 -0800)]
[PATCH] numa_maps update

Change the format of numa_maps to be more compact and contain additional
information that is useful for managing and troubleshooting memory on a
NUMA system.  Numa_maps can now also support huge pages.

Fixes:

1. More compact format. Only display fields if they contain additional
information.

2. Always display information for all vmas. The old numa_maps did not display
vma with no mapped entries. This was a bit confusing because page
migration removes ptes for file backed vmas. After page migration
a part of the vmas vanished.

3. Rename maxref to maxmap. This is the maximum mapcount of all the pages
in a vma and may be used as an indicator as to how many processes
may be using a certain vma.

4. Include the ability to scan over huge page vmas.

New items shown:

dirty
Number of pages in a vma that have either the dirty bit set in the
page_struct or in the pte.

file=<filename>
The file backing the pages if any

stack
Stack area

heap
Heap area

huge
Huge page area. The number of pages shows is the number of huge
pages not the regular sized pages.

swapcache
Number of pages with swap references. Must be >0 in order to
be shown.

active
Number of active pages. Only displayed if different from the number
of pages mapped.

writeback
Number of pages under writeback. Only displayed if >0.

Sample ouput of a process using huge pages:

00000000 default
2000000000000000 default file=/lib/ld-2.3.90.so mapped=13 mapmax=30 N0=13
2000000000044000 default file=/lib/ld-2.3.90.so anon=2 dirty=2 swapcache=2 N2=2
2000000000064000 default file=/lib/librt-2.3.90.so mapped=2 active=1 N1=1 N3=1
2000000000074000 default file=/lib/librt-2.3.90.so
2000000000080000 default file=/lib/librt-2.3.90.so anon=1 swapcache=1 N2=1
2000000000084000 default
2000000000088000 default file=/lib/libc-2.3.90.so mapped=52 mapmax=32 active=48 N0=52
20000000002bc000 default file=/lib/libc-2.3.90.so
20000000002c8000 default file=/lib/libc-2.3.90.so anon=3 dirty=2 swapcache=3 active=2 N1=1 N2=2
20000000002d4000 default anon=1 swapcache=1 N1=1
20000000002d8000 default file=/lib/libpthread-2.3.90.so mapped=8 mapmax=3 active=7 N2=2 N3=6
20000000002fc000 default file=/lib/libpthread-2.3.90.so
2000000000308000 default file=/lib/libpthread-2.3.90.so anon=1 dirty=1 swapcache=1 N1=1
200000000030c000 default anon=1 dirty=1 swapcache=1 N1=1
2000000000320000 default anon=1 dirty=1 N1=1
200000000071c000 default
2000000000720000 default anon=2 dirty=2 swapcache=1 N1=1 N2=1
2000000000f1c000 default
2000000000f20000 default anon=2 dirty=2 swapcache=1 active=1 N2=1 N3=1
200000000171c000 default
2000000001720000 default anon=1 dirty=1 swapcache=1 N1=1
2000000001b20000 default
2000000001b38000 default file=/lib/libgcc_s.so.1 mapped=2 N1=2
2000000001b48000 default file=/lib/libgcc_s.so.1
2000000001b54000 default file=/lib/libgcc_s.so.1 anon=1 dirty=1 active=0 N1=1
2000000001b58000 default file=/lib/libunwind.so.7.0.0 mapped=2 active=1 N1=2
2000000001b74000 default file=/lib/libunwind.so.7.0.0
2000000001b80000 default file=/lib/libunwind.so.7.0.0
2000000001b84000 default
4000000000000000 default file=/media/huge/test9 mapped=1 N1=1
6000000000000000 default file=/media/huge/test9 anon=1 dirty=1 active=0 N1=1
6000000000004000 default heap
607fffff7fffc000 default anon=1 dirty=1 swapcache=1 N2=1
607fffffff06c000 default stack anon=1 dirty=1 active=0 N1=1
8000000060000000 default file=/mnt/huge/test0 huge dirty=3 N1=3
8000000090000000 default file=/mnt/huge/test1 huge dirty=3 N0=1 N2=2
80000000c0000000 default file=/mnt/huge/test2 huge dirty=3 N1=1 N3=2

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] alsa: fix error paths in snd_ctl_elem_add()
Takashi Iwai [Mon, 6 Mar 2006 23:42:51 +0000 (15:42 -0800)]
[PATCH] alsa: fix error paths in snd_ctl_elem_add()

Fix bugs in error paths of snd_ctl_elem_add()
 - NULL reference
 - double free (already freed in snd_ctl_add())

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] time: add barrier after updating jiffies_64
Atsushi Nemoto [Mon, 6 Mar 2006 23:42:51 +0000 (15:42 -0800)]
[PATCH] time: add barrier after updating jiffies_64

Add a compiler barrier so that we don't read jiffies before updating
jiffies_64.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Increase max kmalloc size for very large systems
Jack Steiner [Mon, 6 Mar 2006 23:42:50 +0000 (15:42 -0800)]
[PATCH] Increase max kmalloc size for very large systems

Systems with extemely large numbers of nodes or cpus need to kmalloc
structures larger than is currently supported.  This patch increases the
maximum supported size for very large systems.

This patch should have no effect on current systems.

(akpm: why not just use alloc_pages() for sysfs_cpus?)

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] memory-hotplug compile fix
KAMEZAWA Hiroyuki [Mon, 6 Mar 2006 23:42:49 +0000 (15:42 -0800)]
[PATCH] memory-hotplug compile fix

include/linux/memory_hotplug.h:53: warning: 'struct page' declared inside parameter list

(akpm: I tossed in a couple more possibly-needed-sometime struct decls too)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] add missing pm_power_off's
Adrian Bunk [Mon, 6 Mar 2006 23:42:47 +0000 (15:42 -0800)]
[PATCH] add missing pm_power_off's

Add the missing pm_power_off's for the h8300, v850 and xtensa
architectures.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] s390: fix compile with VIRT_CPU_ACCOUNTING=n
Jan Blunck [Mon, 6 Mar 2006 23:42:46 +0000 (15:42 -0800)]
[PATCH] s390: fix compile with VIRT_CPU_ACCOUNTING=n

When CONFIG_VIRT_CPU_ACCOUNTING is not defined compiling fails with an
undefined reference to account_vtime().

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fix next_timer_interrupt() for hrtimer
Tony Lindgren [Mon, 6 Mar 2006 23:42:45 +0000 (15:42 -0800)]
[PATCH] fix next_timer_interrupt() for hrtimer

Also from Thomas Gleixner <tglx@linutronix.de>

Function next_timer_interrupt() got broken with a recent patch
6ba1b91213e81aa92b5cf7539f7d2a94ff54947c as sys_nanosleep() was moved to
hrtimer.  This broke things as next_timer_interrupt() did not check hrtimer
tree for next event.

Function next_timer_interrupt() is needed with dyntick (CONFIG_NO_IDLE_HZ,
VST) implementations, as the system can be in idle when next hrtimer event
was supposed to happen.  At least ARM and S390 currently use
next_timer_interrupt().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] x86: fix potential jiffies overflow in timer_resume()
Atsushi Nemoto [Mon, 6 Mar 2006 23:42:42 +0000 (15:42 -0800)]
[PATCH] x86: fix potential jiffies overflow in timer_resume()

i386 timer_resume is updating jiffies, not jiffies_64.  It looks there is a
potential overflow problem.  And jiffies_64 and wall_jiffies should be
protected by xtime_lock.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i4l: fix compatiblity issue with big endian systems
Karsten Keil [Mon, 6 Mar 2006 23:42:41 +0000 (15:42 -0800)]
[PATCH] i4l: fix compatiblity issue with big endian systems

This patch fix some compatiblity issues with big endian systems

Signed-off-by: Martin Bachem <info@colognechip.com>
Signed-off-by: Karsten Keil <kkeil@suse.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i4l: fix refcounting problem with ttyIx devices
Karsten Keil [Mon, 6 Mar 2006 23:42:39 +0000 (15:42 -0800)]
[PATCH] i4l: fix refcounting problem with ttyIx devices

If the same ttyIx device was opened by two processes the module was not
released and so the usage count went never to zero again.  This oneliner fixes
the issue.

Signed-off-by: Oskar Senft <o.senft@sirrix.com>
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i4l: add new PCI IDs for HFC-S PCI
Karsten Keil [Mon, 6 Mar 2006 23:42:37 +0000 (15:42 -0800)]
[PATCH] i4l: add new PCI IDs for HFC-S PCI

Add new PCI IDs for HFC-S PCI based ISDN TA 'Primux II S0' and 'Primux II S0'
from Gerdes AG

Signed-off-by: Martin Bachem <info@colognechip.com>
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] cramfs mounts provide corrupted content since 2.6.15
Dave Johnson [Mon, 6 Mar 2006 23:42:36 +0000 (15:42 -0800)]
[PATCH] cramfs mounts provide corrupted content since 2.6.15

Fix handling of cramfs images created by util-linux containing empty
regular files.  Images created by cramfstools 1.x were ok.

Fill out inode contents in cramfs_iget5_set() instead of get_cramfs_inode()
to prevent issues if cramfs_iget5_test() is called with I_LOCK|I_NEW still
set.

Signed-off-by: Dave Johnson <djohnson+linux-kernel@sw.starentnetworks.com>
Cc: Olaf Hering <olh@suse.de>
Cc: Chris Mason <mason@suse.com>
Cc: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoslab: clarify and fix calculate_slab_order()
Linus Torvalds [Tue, 7 Mar 2006 01:44:43 +0000 (17:44 -0800)]
slab: clarify and fix calculate_slab_order()

If we triggered the 'offslab_limit' test, we would return with
cachep->gfporder incremented once too many times.

This clarifies the logic somewhat, and fixes that bug.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoAllocate 96 bytes for SCSI sense data reply
Linus Torvalds [Tue, 7 Mar 2006 01:41:44 +0000 (17:41 -0800)]
Allocate 96 bytes for SCSI sense data reply

The SCSI layer uses SCSI_SENSE_BUFFERSIZE (96) for the sense buffer
size, even though some other code uses "sizeof(struct request_sense)"
(which is 64 bytes).  Allocate the buffer using the bigger of the two
for safety.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoAdd early-boot-safety check to cond_resched()
Linus Torvalds [Tue, 7 Mar 2006 01:38:49 +0000 (17:38 -0800)]
Add early-boot-safety check to cond_resched()

Just to be safe, we should not trigger a conditional reschedule during
the early boot sequence.  We've historically done some questionable
early on, and the safety warnings in __might_sleep() are generally
turned off during that period, so there might be problems lurking.

This affects CONFIG_PREEMPT_VOLUNTARY, which takes over might_sleep() to
cause a voluntary conditional reschedule.

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] USB Serial: fix use-after-free bug in usb-serial core
Greg Kroah-Hartman [Mon, 6 Mar 2006 21:25:52 +0000 (13:25 -0800)]
[PATCH] USB Serial: fix use-after-free bug in usb-serial core

This fixes a use-after-free bug in the usb-serial core.  It is simple to
trigger this (open a usb-serial port, then yank the device out before
closing the port.)  Thanks to Stefan Seyfried <seife@suse.de> for
reporting this, and to the slab debugging code which enabled it to be
tracked down.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Mon, 6 Mar 2006 20:10:42 +0000 (12:10 -0800)]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] chelsio: fix kmalloc failure in t1_espi_create
  Merge branch 'master'
  s2io: set_multicast_list bug

18 years agoFix "check_slabp" printout size calculation
Linus Torvalds [Mon, 6 Mar 2006 20:10:07 +0000 (12:10 -0800)]
Fix "check_slabp" printout size calculation

We want to use the "struct slab" size, not the size of the pointer to
same.  As it is, we'd not print out the last <n> entry pointers in the
slab (where <n> is ~10, depending on whether it's a 32-bit or 64-bit
kernel).

Gaah, that slab code was written by somebody who likes unreadable crud.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] chelsio: fix kmalloc failure in t1_espi_create
Eric Sesterhenn [Sat, 4 Mar 2006 22:16:00 +0000 (01:16 +0300)]
[PATCH] chelsio: fix kmalloc failure in t1_espi_create

memset() is called before check.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years agoMerge branch 'master'
Jeff Garzik [Mon, 6 Mar 2006 19:37:47 +0000 (14:37 -0500)]
Merge branch 'master'

18 years ago[SERIAL] Fix two bugs in parport_serial
Russell King [Sun, 5 Mar 2006 00:31:22 +0000 (00:31 +0000)]
[SERIAL] Fix two bugs in parport_serial

Steinar H. Gunderson reported:

  - For some reason, it detects the 9845 as a 9735 -- it appears this is
    simply related to the ordering in parport_serial_pci_tbl[]. If we move
    the 9845 up above the 9735, it prints out 9710:9845, but no change in
    behaviour. (We didn't find out why this was the case; we left it alone
    since it didn't affect our problem.)
  - The card has no parallel port (at least no physical ones), yet it reports
    (via its subsystem ID of 0x0014) one parallel port and four serial ports.
    The probe for the parallel port fails, and the driver just aborts. Thus,
    it doesn't find the serial ports.

Fix the debugging code to use dev_dbg, but don't bother displaying the
PCI ID of the detected board (that's accessible via other means.)

Also, arrange for parport_register() to return 0 even if it finds no
ports.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable
Linus Torvalds [Sun, 5 Mar 2006 18:03:05 +0000 (10:03 -0800)]
Merge /linux/kernel/git/sfrench/cifs-2.6-stable

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable:
  [CIFS] Always match oplock break (cache notification) to the right tcp

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sun, 5 Mar 2006 18:02:25 +0000 (10:02 -0800)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Mark __ex_table section correctly.

18 years ago[SPARC64]: Mark __ex_table section correctly.
David S. Miller [Sun, 5 Mar 2006 07:23:56 +0000 (23:23 -0800)]
[SPARC64]: Mark __ex_table section correctly.

We must use the "a" (allocate) attribute every time we
emit an entry into the __ex_table section.

For consistency, use "a" instead of #alloc which is some
Solaris compat cruft GNU as provides on Sparc.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] ccid3: Divide by zero fix
Ian McDonald [Sat, 4 Mar 2006 01:54:46 +0000 (17:54 -0800)]
[DCCP] ccid3: Divide by zero fix

In rare circumstances 0 is returned by dccp_li_hist_calc_i_mean which
leads to a divide by zero in ccid3_hc_rx_packet_recv. Explicitly check
for zero return now. Update copyright notice at same time.

Found by Arnaldo.

Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[ATM]: [fore200e] fix section mismatch warnings
Sam Ravnborg [Sat, 4 Mar 2006 01:50:37 +0000 (17:50 -0800)]
[ATM]: [fore200e] fix section mismatch warnings

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[ATM]: keep atmsvc failure messages quiet
Chas Williams [Sat, 4 Mar 2006 01:49:58 +0000 (17:49 -0800)]
[ATM]: keep atmsvc failure messages quiet

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BRIDGE]: generate kobject remove event
Stephen Hemminger [Sat, 4 Mar 2006 01:16:15 +0000 (17:16 -0800)]
[BRIDGE]: generate kobject remove event

The earlier round of kobject/sysfs changes to bridge caused
it not to generate a uevent on removal. Don't think any application
cares (not sure about Xen) but since it generates add uevent
it should generate remove as well.

Signed-off-by: Stephen Hemminger <shemmigner@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BRIDGE]: port timer initialization
Stephen Hemminger [Sat, 4 Mar 2006 01:15:34 +0000 (17:15 -0800)]
[BRIDGE]: port timer initialization

Initialize the STP timers for a port when it is created,
rather than when it is enabled. This will prevent future race conditions
where timer gets started before port is enabled.

Signed-off-by: Stephen Hemminger <shemmigner@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BRIDGE]: fix crash in STP
Stephen Hemminger [Sat, 4 Mar 2006 01:14:51 +0000 (17:14 -0800)]
[BRIDGE]: fix crash in STP

Bridge would crash because of uninitailized timer if STP is used and
device was inserted into a bridge before bridge was up. This got
introduced when the delayed port checking was added.  Fix is to not
enable STP on port unless bridge is up.

Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=6140
Dup:      http://bugzilla.kernel.org/show_bug.cgi?id=6156

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[CIFS] Always match oplock break (cache notification) to the right tcp
Steve French [Sun, 5 Mar 2006 03:39:55 +0000 (03:39 +0000)]
[CIFS] Always match oplock break (cache notification) to the right tcp
session when multiply mounted.

Fixes slow response when cifs client is mounted to shares on multiple
servers and oplock break occurs (usually due to attempt to multiply open a
file).  When treeids on mutiple mounted shares match and we find the wrong
match first, we searched for the wrong cached files to send oplock break
response for which usually meant that no matching file was found and thus
the server would have to timeout the notification.  Oplock break timeout is
about 20 seconds on some servers so this could cause significantly slower
performance on file open calls in a few cases (in particular when multiple
shares are mounted from multiple servers, tree ids match, and we have a
cached file which is later opened multiple times).  This was the most
important of the bugs that was found and fixed at Connectathon
(interoperability testing event) this week.

Acked-by: Shaggy (shaggy@austin.ibm.com)
Signed-off-by: Steve French (sfrench@us.ibm.com)
18 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Sun, 5 Mar 2006 02:51:45 +0000 (18:51 -0800)]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/misc-2.6

* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  [PATCH] Add missing ifdef for VIA RNG code

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Sat, 4 Mar 2006 23:30:32 +0000 (15:30 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] au1xmmc: Fix a compilation warning ('status' is not used)
  [MMC] au1xmmc: Fix linking error because mmc_rsp_type doesn't exist
  [MMC] au1xmmc: Fix compilation error by using platform_driver

18 years ago[MMC] au1xmmc: Fix a compilation warning ('status' is not used)
Martin Michlmayr [Sat, 4 Mar 2006 23:02:10 +0000 (23:02 +0000)]
[MMC] au1xmmc: Fix a compilation warning ('status' is not used)

Fix a trivial compilation warning:

  CC      drivers/mmc/au1xmmc.o
drivers/mmc/au1xmmc.c: In function â€˜au1xmmc_dma_callback’:
drivers/mmc/au1xmmc.c:743: warning: unused variable â€˜status’

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[MMC] au1xmmc: Fix linking error because mmc_rsp_type doesn't exist
Martin Michlmayr [Sat, 4 Mar 2006 23:01:39 +0000 (23:01 +0000)]
[MMC] au1xmmc: Fix linking error because mmc_rsp_type doesn't exist

drivers/mmc/au1xmmc.c doesn't compile because commit
e92251762d02a46177d4105d1744041e3f8bc465 introduced a typo and passes
the wrong argument to the mmc_resp_type macro.

Error because of the typo:

  CC      drivers/mmc/au1xmmc.o
drivers/mmc/au1xmmc.c: In function â€˜au1xmmc_send_command’:
drivers/mmc/au1xmmc.c:197: warning: implicit declaration of function â€˜mmc_rsp_type’
...
  LD      .tmp_vmlinux1
drivers/built-in.o: In function `au1xmmc_request':au1xmmc.c:(.text+0x89504): undefined reference to `mmc_rsp_type'
:au1xmmc.c:(.text+0x8968c): undefined reference to `mmc_rsp_type'
make: *** [.tmp_vmlinux1] Error 1

Error because of the wrong argument:

  CC      drivers/mmc/au1xmmc.o
drivers/mmc/au1xmmc.c: In function â€˜au1xmmc_send_command’:
drivers/mmc/au1xmmc.c:197: error: invalid type argument of â€˜->’

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[MMC] au1xmmc: Fix compilation error by using platform_driver
Martin Michlmayr [Sat, 4 Mar 2006 23:01:13 +0000 (23:01 +0000)]
[MMC] au1xmmc: Fix compilation error by using platform_driver

drivers/mmc/au1xmmc.c currently doesn't compile; it needs to be
converted to use platform_driver.  I cannot test this change because
of lack of hardware but I followed the drivers this one is based on,
and the code is certainly not worse than before.

drivers/mmc/au1xmmc.c: At top level:
drivers/mmc/au1xmmc.c:1002: error: â€˜platform_bus_type’ undeclared here (not in a function)
make[2]: *** [drivers/mmc/au1xmmc.o] Error 1

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years agoppc64: make sure to align stack pointer to 16 bytes at boot
Linus Torvalds [Sat, 4 Mar 2006 23:00:45 +0000 (15:00 -0800)]
ppc64: make sure to align stack pointer to 16 bytes at boot

yaboot is scrogged and calls us with an invalid stack alignment,
it seems.

Thanks to David Woodhouse to pointing me to the problem.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agos2io: set_multicast_list bug
Jeff Garzik [Sat, 4 Mar 2006 17:06:51 +0000 (12:06 -0500)]
s2io: set_multicast_list bug

The mac_addr variable doesn't get reset between
(re)additions of multicast addresses. One byte
of all multicast addresses (except the first)
can be incorrect.

Signed-off-by: Arthur Kepner <akepner@sgi.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] Add missing ifdef for VIA RNG code
Mark Brown [Sat, 4 Mar 2006 02:05:58 +0000 (21:05 -0500)]
[PATCH] Add missing ifdef for VIA RNG code

Almost all the code for the VIA RNG is guarded with __i386__ #ifdefs,
the only exception being the enumeration of RNG types which is used to
index into the rng_vector ops array.  This patch adds an ifdef around
that for consistency and since the guard makes a difference when adding
new RNG types on non-i386 hardware.

Signed-Off-By: Mark Brown <broonie@sirena.org.uk>
Signed-Off-By: Jeff Garzik <jeff@garzik.org>
18 years agoIB/srp: Don't send task management commands after target removal
Roland Dreier [Fri, 3 Mar 2006 23:47:25 +0000 (15:47 -0800)]
IB/srp: Don't send task management commands after target removal

Just fail abort and reset requests that come in after we've already
decided to remove a target.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years ago[PATCH] reiserfs: fix unaligned bitmap usage
Jeff Mahoney [Thu, 2 Mar 2006 18:25:26 +0000 (13:25 -0500)]
[PATCH] reiserfs: fix unaligned bitmap usage

The bitmaps associated with generation numbers for directory entries
are declared as an array of ints. On some platforms, this causes alignment
exceptions.

The following patch uses the standard bitmap declaration macros to
declare the bitmaps, fixing the problem.

Originally from Takashi Iwai.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] reiserfs: do not check if unsigned < 0
Vladimir V. Saveliev [Thu, 2 Mar 2006 10:54:39 +0000 (02:54 -0800)]
[PATCH] reiserfs: do not check if unsigned < 0

This patch fixes bugs in reiserfs where unsigned integers were checked
whether they are less then 0.

Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] numa_maps: Fix potential crash on non IA64 platforms
Christoph Lameter [Thu, 2 Mar 2006 10:54:37 +0000 (02:54 -0800)]
[PATCH] numa_maps: Fix potential crash on non IA64 platforms

numa_maps should not scan over huge vmas in order not to cause problems for
non IA64 platforms that may have pte entries pointing to huge pages in a
variety of ways in their page tables.  Add a simple check to ignore vmas
containing huge pages.

Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] time_interpolator: Use readq_relaxed() instead of readq().
Christoph Lameter [Thu, 2 Mar 2006 10:54:35 +0000 (02:54 -0800)]
[PATCH] time_interpolator: Use readq_relaxed() instead of readq().

On some platforms readq performs additional work to make sure I/O is done
in a coherent way.  This is not needed for time retrieval as done by the
time interpolator.  So we can use readq_relaxed instead which will improve
performance.

It affects sparc64 and ia64 only.  Apparently it makes a significant
difference on ia64.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fix acpi_video_flags on x86-64
Stefan Seyfried [Thu, 2 Mar 2006 10:54:34 +0000 (02:54 -0800)]
[PATCH] fix acpi_video_flags on x86-64

acpi_video_flags variable is unsigned long, so it should be set as such.
This actually matters on x86-64.

Signed-off-by: Stefan Seyfried <seife@suse.de>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] v9fs: simplify fid mapping
Eric Van Hensbergen [Thu, 2 Mar 2006 10:54:33 +0000 (02:54 -0800)]
[PATCH] v9fs: simplify fid mapping

v9fs has been plagued by an over-complicated approach trying to map Linux
dentry semantics to Plan 9 fid semantics.  Our previous approach called for
aggressive flushing of the dcache resulting in several problems (including
wierd cwd behavior when running /bin/pwd).

This patch dramatically simplifies our handling of this fid management.  Fids
will not be clunked as promptly, but the new approach is more functionally
correct.  We now clunk un-open fids only when their dentry ref_count reaches 0
(and d_delete is called).

Another simplification is we no longer seek to match fids to the process-id or
uid of the action initiator.  The uid-matching will need to be revisited when
we fix the security model.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] v9fs: fix bug in atomic create open fix
Eric Van Hensbergen [Thu, 2 Mar 2006 10:54:32 +0000 (02:54 -0800)]
[PATCH] v9fs: fix bug in atomic create open fix

Lucho's atomic create+open fix had a bug in the super block initialization
causing all mounts to fail.  He was freeing an fcall too early.  This patch
fixes that oversight.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] v9fs: fix atomic create open
Latchesar Ionkov [Thu, 2 Mar 2006 10:54:30 +0000 (02:54 -0800)]
[PATCH] v9fs: fix atomic create open

In order to assure atomic create+open v9fs stores the open fid produced by
v9fs_vfs_create in the dentry, from where v9fs_file_open retrieves it and
associates it with the open file.

This patch modifies v9fs to use nameidata.intent.open values to do the atomic
create+open.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] "drivers/mtd/redboot.c: recognise a foreign byte sex partition table" update
John Bowler [Thu, 2 Mar 2006 10:54:29 +0000 (02:54 -0800)]
[PATCH] "drivers/mtd/redboot.c: recognise a foreign byte sex partition table" update

Sync up the recent redboot fix with MTD CVS.  It uses the correct swab()
functions.

Cc: John Bowler <jbowler@acm.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] out_of_memory() locking fix
Andrew Morton [Thu, 2 Mar 2006 10:54:28 +0000 (02:54 -0800)]
[PATCH] out_of_memory() locking fix

I seem to have lost this read_unlock().

While we're there, let's turn that interruptible sleep unto uninterruptible,
so we don't get a busywait if signal_pending().  (Again.  We seem to have a
habit of doing this).

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2
Linus Torvalds [Wed, 1 Mar 2006 23:49:50 +0000 (15:49 -0800)]
Merge branch 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2

18 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 1 Mar 2006 23:10:45 +0000 (15:10 -0800)]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6
Linus Torvalds [Wed, 1 Mar 2006 22:17:59 +0000 (14:17 -0800)]
Merge git://git./linux/kernel/git/brodo/pcmcia-fixes-2.6

18 years ago[PATCH] fix build breakage in eeh.c in 2.6.16-rc5-git5
Greg KH [Wed, 1 Mar 2006 21:46:00 +0000 (13:46 -0800)]
[PATCH] fix build breakage in eeh.c in 2.6.16-rc5-git5

This patch should fixe a problem with eeh_add_device_late() not being
defined in the ppc64 build process, causing the build to break.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] ocfs2: use hlists for lockres hash
Mark Fasheh [Wed, 1 Mar 2006 01:31:22 +0000 (17:31 -0800)]
[PATCH] ocfs2: use hlists for lockres hash

Switch from list_head to hlist_head. Make the size of the hash dependent
upon the allocated area, rather than a constant.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years ago[PATCH] ocfs2: added source addr to bind() in o2net_start_connect()
Sunil Mushran [Wed, 1 Mar 2006 07:28:01 +0000 (23:28 -0800)]
[PATCH] ocfs2: added source addr to bind() in o2net_start_connect()

to prevent confusion when a virtual ip is created on the same interface

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years agoocfs2: Respond to on-disk corruption in the extent map code.
Joel Becker [Wed, 1 Mar 2006 01:58:36 +0000 (17:58 -0800)]
ocfs2: Respond to on-disk corruption in the extent map code.

The extent map code has long noticed when the on-disk extent information
is corrupt.  However, so far it has only returned an error.  We should
take the filesystem read-only, as it is corrupt.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years agoocfs2: Set .owner on masklog sysfs attributes.
Joel Becker [Tue, 28 Feb 2006 00:53:05 +0000 (16:53 -0800)]
ocfs2: Set .owner on masklog sysfs attributes.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years ago[PATCH] ocfs2: fix orphan recovery deadlock
Mark Fasheh [Thu, 23 Feb 2006 01:35:08 +0000 (17:35 -0800)]
[PATCH] ocfs2: fix orphan recovery deadlock

Orphan dir recovery can deadlock with another process in
ocfs2_delete_inode() in some corner cases. Fix this by tracking recovery
state more closely and allowing it to handle inode wipes which might
deadlock.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years ago[PATCH] ocfs2: complete failure recovery for nodemanager init
Jeff Mahoney [Wed, 22 Feb 2006 00:54:00 +0000 (16:54 -0800)]
[PATCH] ocfs2: complete failure recovery for nodemanager init

 This patch finishes cleaning up the node manager allocations if it fails
 to initialize.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years ago[MIPS] Use USECS_PER_SEC / HZ instead of tick_usec in do_gettimeofday.
Atsushi Nemoto [Wed, 1 Mar 2006 06:16:26 +0000 (15:16 +0900)]
[MIPS] Use USECS_PER_SEC / HZ instead of tick_usec in do_gettimeofday.

The 'tick_usec' is USER_HZ period in usec.  do_gettimeofday() should
use kernel HZ value.

Here is a patch for MIPS.  It seems m32r, m68k and sparc have same
problem though their HZ and USER_HZ are same for now.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[PATCH] ocfs2: remove non existing function prototypes
Mark Fasheh [Wed, 22 Feb 2006 00:46:33 +0000 (16:46 -0800)]
[PATCH] ocfs2: remove non existing function prototypes

Remove some prototypes from tcp.h for functions which have long been gone.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years ago[PATCH] ocfs2: remove unused code
Mark Fasheh [Thu, 23 Feb 2006 21:23:39 +0000 (13:23 -0800)]
[PATCH] ocfs2: remove unused code

Remove some #ifdef'd out code which was inadvertantly introduced in our
initial merge.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years ago[PATCH] ocfs2: remove pointless max journal size limit
Mark Fasheh [Sat, 25 Feb 2006 01:23:36 +0000 (17:23 -0800)]
[PATCH] ocfs2: remove pointless max journal size limit

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years ago[PATCH] ocfs2: fix -Wformat warnings when building UML on x86-64
Jeff Mahoney [Tue, 21 Feb 2006 16:57:30 +0000 (11:57 -0500)]
[PATCH] ocfs2: fix -Wformat warnings when building UML on x86-64

 The check to determine which format string is appopriate for u64 and
 friends works in most cases, but UML on x86_64 doesn't define CONFIG_X86_64,
 so it results in screen fulls of compile-time warnings.

 This patch fixes it to handle that case.

 fs/ocfs2/cluster/masklog.h |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Wed, 1 Mar 2006 18:22:04 +0000 (10:22 -0800)]
Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6

18 years ago[PATCH] pcmcia: CM4000, CM4040 Driver fixes
Harald Welte [Tue, 14 Feb 2006 08:21:26 +0000 (09:21 +0100)]
[PATCH] pcmcia: CM4000, CM4040 Driver fixes

Using this patch, Omnikey CardMan 4000 and 4040 devices automatically
get their device nodes created by udev.

Also, we now check for (and handle) failure of pcmcia_register_driver()

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
18 years ago[PATCH] pcmcia: add id for AMB8110 PC Card
Jesse Allen [Tue, 21 Feb 2006 06:08:18 +0000 (22:08 -0800)]
[PATCH] pcmcia: add id for AMB8110 PC Card

The axnet_cs driver can support the AMB8110 PC Card, so add the id for it.

In the old pcmcia-cs config file, this card is listed with the comment "not
specific enough".  The last entry in the axnet_ids has the same comment.
They are disabled, and for good reason as it was originally identified by
the MANFID, and that is shared with several cards that use both the
pcnet_cs driver and axnet_cs driver.  I tried my AMB8110 with pcnet_cs, and
found that it works fine, and I cannot find a reason for either, except
that the old config file recommended axnet_cs.

Signed-off-by: Jesse Allen <the3dfxdude@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
18 years ago[PATCH] pcmcia: avoid binding hostap_cs to Orinoco cards
Pavel Roskin [Tue, 28 Feb 2006 06:18:31 +0000 (01:18 -0500)]
[PATCH] pcmcia: avoid binding hostap_cs to Orinoco cards

Don't just use cards with PCMCIA ID 0x0156, 0x0002.  Make sure that the
vendor string is "Intersil" or "INTERSIL"

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
18 years ago[PATCH] pcmcia: Add macro to match PCMCIA cards by numeric ID and first vendor string
Pavel Roskin [Tue, 28 Feb 2006 06:18:29 +0000 (01:18 -0500)]
[PATCH] pcmcia: Add macro to match PCMCIA cards by numeric ID and first vendor string

This is needed to distinguish Intersil and non-Intersil cards with
numeric ID 0x0156, 0x0002.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
18 years ago[PATCH] pcmcia: add another ide-cs CF card id
David Brownell [Wed, 25 Jan 2006 14:36:32 +0000 (06:36 -0800)]
[PATCH] pcmcia: add another ide-cs CF card id

Add another CF card ID.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
18 years ago[PATCH] pcmcia: properly handle pseudo multi-function devices
Dominik Brodowski [Fri, 27 Jan 2006 18:15:02 +0000 (19:15 +0100)]
[PATCH] pcmcia: properly handle pseudo multi-function devices

The second pseudo multi-function device of a PCMCIA card may only be
configured once the first one is initialized. Therefore, delay the
registration of the second device until the first one is initialized.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net
18 years agoMerge branch 'e1000' of ssh://198.78.49.142/srv/git/intel/linux-2.6
Jeff Garzik [Wed, 1 Mar 2006 06:53:32 +0000 (01:53 -0500)]
Merge branch 'e1000' of ssh://198.78.49.142/srv/git/intel/linux-2.6