drm/i915: Onion unwind for intel_init_ring_common()

Rather than call intel_engine_cleanup() with a partially constructed
engine, unwind the error during intel_init_ring_common().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403113426.25707-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: intel_ring.engine is unused

Or rather it is used only by intel_ring_pin() to extract the
drm_i915_private which we can easily pass in. As this is a relatively
rare operation, save the space in the struct, and as such it is even
break even in the extra code for passing around the parameter:

add/remove: 0/0 grow/shrink: 2/3 up/down: 15/-15 (0)
function                                     old     new   delta
intel_init_ring_buffer                       906     918     +12
execlists_context_pin                       1308    1311      +3
mock_engine                                  407     403      -4
intel_engine_create_ring                     367     363      -4
intel_ring_pin                               326     319      -7
Total: Before=1261794, After=1261794, chg +0.00%

v2: Reorder intel_init_ring_buffer to keep the ring setup together:

add/remove: 0/0 grow/shrink: 2/3 up/down: 9/-15 (-6)
function                                     old     new   delta
intel_init_ring_buffer                       906     912      +6
execlists_context_pin                       1308    1311      +3
mock_engine                                  407     403      -4
intel_engine_create_ring                     367     363      -4
intel_ring_pin                               326     319      -7
Total: Before=1261794, After=1261788, chg -0.00%

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403113426.25707-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20170403

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Clear gt.active_requests before checking idle status

commit 8490ae207f1d ("drm/i915: Suppress busy status for engines if
wedged") moved the check for inflight requests to the
intel_engines_are_idle() check to protect the idle worker. However, the
request selftests were also checking the engine idle status and erroring
out if they did not become idle within a short period of time after the
final wait. In order to accommodate the new check, call retire requests
prior to the engine check so that we flush all the waits.

Fixes: 8490ae207f1d ("drm/i915: Suppress busy status for engines if wedged")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331192121.10024-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>

drm/i915/uc: Drop use of MISSING_CASE on trivial enums

We can rely on compiler to notify us if we miss any case.
This approach may also reduce driver size (reported ~4K).

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331102652.177664-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: make a few DDI functions static

We don't need to export them since they're not being used outside the
file. The next time I try to find the callers for these things I will
know I won't need to look outside intel_ddi.c.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490907472-10883-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915: Combine reset_all_global_seqno() loops into one

We can merge the pair of loops over the engines and their timelines into
a single loop, making it easier to read and more consistent with the
commentary.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Remove redudant wait for each engine to idle from seqno wrap

Having added the wait upon each engine to idle into the central
i915_gem_wait_for_idle(), we can remove the now redundant wait from
reset_all_global_seqno(). This has the advantage of removing the late
detection of an error (an engine still busy) which left the seqno reset
only partially complete (though it should be safe enough!).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()

Make i915_gem_wait_for_idle() be a little heavier in order to try and
guarantee that the GPU is indeed idle (by checking each engine
individually is idle, i.e. all writes are complete and the rings
stopped) after waiting for in-flight requests to be completed.

v2: And return the final error.
v3: Break the wait_for() out from under the WARN -- the macro expansion
is hideous and unreadable in the warning message
v4: If wait_for_engine() fails the result is catastrophic, mark the
device as wedged and wait for the repair team.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98836
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Move retire-requests into i915_gem_wait_for_idle()

As we now distinguish everywhere that can call
i915_gem_retire_requests() following a successful wait_for_idle, we can
remove the duplication by moving that call into i915_gem_wait_for_idle()
itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Move fw path check to fetch_uc_fw()

There is no reason to separately check for valid fw path before
we try to fetch it. Let the fetch function take care of this.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330112115.120240-2-michal.wajdeczko@intel.com

drm/i915/huc: Remove unused intel_huc_fini()

This function is no longer used. Its functionality is covered
by intel_uc_fini_fw().

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Add intel_uc_fw_fini()

Cleanups of uc firmware structs from GuC and Huc are the same for both.
Move common code to the helper function to avoid duplication.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Add intel_uc_fw_type_repr()

Some of the DRM_NOTE messages are just using "uC" without specifying
which uc they are related to. We can be more user friendly.

v2: moved to the header (Joonas)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Move intel_uc_fw_status_repr() to intel_uc.h

The file fits better. Also use "<invalid>" for invalid case.

v2: move directly to .h (Joonas)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drivers: gpu: drm: i915L intel_lpe_audio: Fix kerneldoc comments

Add description for existing parameter 'pipe' to fix the build
warning: ./drivers/gpu/drm/i915/intel_lpe_audio.c:342: warning: No
description found for parameter 'pipe'.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330115510.14054-1-diaconita.tamara@gmail.com

drm/i915: Suppress busy status for engines if wedged

If the driver is wedged, HW state may be very inconsistent and
report that it is still busy, even though we have stopped using it. This
can lead to a double *ERROR* rather than a graceful cleanup after
wedging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-2-chris@chris-wilson.co.uk

drm/i915: Do request retirement before marking engines as wedged

As we declare an engine as wedged, we mark all of its active requests as
in error. However, we don't want to mark successfully completed requests
as in error, which requires us to retire those requests first.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-1-chris@chris-wilson.co.uk

drm/i915: Drop verbose and archaic "ring" from our internal engine names

We pretty print the name of an engine in several places, mostly for
debug, but also in the GPU hang report. Using "ring" in the name is
archaic (we call those engines now to differentiate them from the
multiple rings of commands we execute on each engine), quite verbose and
often tautological. We run out of room in our GPU hang report for
instance if we have more than a couple of engines hung simultaneously.
Bit the bullet and update the strings to reflect the common internal names.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330134820.12273-1-chris@chris-wilson.co.uk

drm/i915: Use a dummy timeline name for a signaled fence

Michał Winiarski pointed out that the debugging infrastructure (such as
trace_dma_fence_release) likes to pretty print the timeline name, long
after we have freed the timeline. Our timelines currently live as part of
the GTT (due to the strict ordering we currently use through each) which
belong to the context. We aim to free the context and release its
hardware resources as soon as we able to (i.e. when the last
fence/request using it has been signaled and retired). As the
.get_timeline_name is purely a debug feature, rather than extending the
lifetime of the context, or splitting it into many different release
phases just to keep the name around, replace the timeline name with a
constant after the fence has been signaled. This avoids the potential
use-after-free.

Reported-by: Krzysztof Olinski <krzysztof.e.olinski@intel.com>
Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170330111614.29757-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

Merge tag 'gvt-next-2017-03-30' of https://github.com/01org/gvt-linux into drm-intel-next-queued

gvt-next-2017-03-30

- Add mdev attribute group for per-vgpu info
- Time slice based vGPU scheduling QoS support (Gao Ping)
- Initial KBL support for E3 server (Han Xu)
- other misc.

Link: http://patchwork.freedesktop.org/patch/msgid/20170330100516.dkavi3rtlsmnoepi@zhen-hp.sh.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex

Since commit 1233e2db199d ("drm/i915: Move object backing storage
manipulation to its own locking"), i915_gem_object_put_pages() and
specifically the i915_gem_gtt_finish_pages() may be called from outside
of the struct_mutex and so we can no longer pass I915_WAIT_LOCKED to
i915_gem_wait_for_idle.

Fixes: 1233e2db199d ("drm/i915: Move object backing storage manipulation to its own locking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170330085341.20311-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/guc: Take enable_guc_loading check out of GEM core code

The should happen as soon as possible, but always within the logic that
depends on it (and not interrupting the top-level driver control flow).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490720027-23234-1-git-send-email-oscar.mateo@intel.com

drm/i915/opregion: debug log about invalid ACPI OpRegion VBT

Leave more breadcrumbs for debuggers.

Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490783578-6065-3-git-send-email-jani.nikula@intel.com

drm/i915/opregion: try to validate RVDA VBT only if it's there

Seems more sensible this way, and reduces indent for the more common
case.

Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490783578-6065-2-git-send-email-jani.nikula@intel.com

drm/i915/opregion: bail out early for systems with no opregion VBT

Reduce indent. No functional changes.

Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490783578-6065-1-git-send-email-jani.nikula@intel.com

drm/i915/gvt: control the scheduler by timeslice usage

The timeslice usage will determine vGPU whether has chance to
schedule or not at every vGPU switch checkpoint.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: create an idle vGPU

vGPU resource is allocated by scheduler. To account for non-allocated
free cycles, we create an idle vGPU as the placeholder similar to idle task
concept, which is useful to handle some corner cases in scheduling policy.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: add basic function for weight control

This method tries to guarantee precision in second level, with the
adjustment conducted in every 100ms. At the end of each vGPU switch
calculate the sched time and subtract it from the time slice
allocated; the allocated time slice for every 100ms together with
remaining timeslice, will be used to decide how much timeslice
allocated to this vGPU in the next 100ms slice, with the end goal
to guarantee weight ratio in second level.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: define weight according to vGPU type

The weight defines proportional control of physical GPU resource
shared between vGPUs. So far the weight is tied to a specific vGPU
type, i.e when creating multiple vGPUs with different types, they
will inherit different weights.

e.g. The weight of type GVTg_V5_2 is 8, the weight of type GVTg_V5_4
is 4, so vGPU of type GVTg_V5_2 has double vGPU resource of vGPU type
GVTg_V5_4.

TODO: allow user control the weight setting in the future.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: factor out the scheduler

Factor out the scheduler to a more clear structure, the basic
logic is to find out next vGPU first and then schedule it.
vGPUs were ordered in a LRU list, scheduler scan from the LRU
list head and choose the first vGPU who has pending workload.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: add some statistic routine for scheduler

Add some statistic routine to collect the time when vGPU is
scheduled in/out and the time of the last ctx submission.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: use hrtimer replace delayed_work in scheduler

Currently the scheduler is triggered by delayed_work, which doesn't
provide precision at microsecond level. Move to hrtimer instead for
more accurate control.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: remove the redundant info NULL check

The variable info is never NULL, which is checked by the caller. This
patch removes the redundant info NULL check logic.

Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: adjust mem size for low resolution type

From commit d1a513be1f0a ("drm/i915/gvt: add resolution definition for vGPU
type"), small type has been restricted to small resolution, so not
require larger high GM size any more. Change to smaller 384M for more
VM creation with vGPU enabled which still perform reasonable workload.

Fixes: d1a513be1f0a ("drm/i915/gvt: add resolution definition for vGPU type")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: Use LINEAR modifier instead of NONE

They're the same, so use the one which makes more sense.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324212950.2206-1-ben@bwidawsk.net
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Revert "drm/i915: Skip execlists_dequeue() early if the list is empty"

This reverts commit 6c943de6686f ("drm/i915: Skip execlists_dequeue()
early if the list is empty").

The validity of using READ_ONCE there depends upon having a mb to
coordinate the assignment of engine->execlist_first inside
submit_request() and checking prior to taking the spinlock in
execlists_dequeue(). We wrote "the update to TASKLET_SCHED incurs a
memory barrier making this cross-cpu checking safe", but failed to
notice that this mb was *conditional* on the execlists being ready, i.e.
there wasn't the required mb when it was most necessary!

We could install an unconditional memory barrier to fixup the
READ_ONCE():

diff --git a/drivers/gpu/drm/i915/intel_lrc.c
b/drivers/gpu/drm/i915/intel_lrc.c
index 7dd732cb9f57..1ed164b16d44 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -616,6 +616,7 @@ static void execlists_submit_request(struct
drm_i915_gem_request *request)

        if (insert_request(&request->priotree, &engine->execlist_queue))
{
                engine->execlist_first = &request->priotree.node;
+               smp_wmb();
                if (execlists_elsp_ready(engine))

But we have opted to remove the race as it should be rarely effective,
and saves us having to explain the necessary memory barriers which we
quite clearly failed at.

Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 6c943de6686f ("drm/i915: Skip execlists_dequeue() early if the list is empty")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329100052.29505-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>

drm/i915: Avoid lock dropping between rescheduling

Unlocking is dangerous. In this case we combine an early update to the
out-of-queue request, because we know that it will be inserted into the
correct FIFO priority-ordered slot when it becomes ready in the future.
However, given sufficient enthusiasm, it may become ready as we are
continuing to reschedule, and so may gazump the FIFO if we have since
dropped its spinlock. The result is that it may be executed too early,
before its dependencies.

v2: Move all work into the second phase over the topological sort. This
removes the shortcut on the out-of-rbtree request to ensure that we only
adjust its priority after adjusting all of its dependencies.

Fixes: 20311bd35060 ("drm/i915/scheduler: Execute requests in order of priorities")
Testcase: igt/gem_exec_whisper
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327202143.7972-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Move WARN_ON/MISSING_CASE macros to i915_utils.h

We can't sometimes use these macros in other headers due to
include and definition order. As i915_utils.h already contains
other helper macros move these macros there.

v2: checkpatch cleanup for WARN() macro.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328084513.174200-1-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/gvt: remove workload from intel_shadow_wa_ctx structure

intel_shadow_wa_ctx is a field of intel_vgpu_workload. container_of() can
be used to refine the relation-ship between intel_shadow_wa_ctx and
intel_vgpu_workload. This patch removes the useless dereference.

v2. add "drm/i915/gvt" prefix. (Zhenyu)

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Turn on KBL platform support.

Turn on KBL WS platform support in gvt-g. More platforms would be
enabled, after validate.

Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add KBL dispatch logic in each function.

Extend function dispatch logic to support KBL platform.

Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Update save/restore list to compatible KBL platform.

Add some KBL specially registers to save/restore list.

Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Update MMIO handle policy to compatible KBL platform.

Update MMIO handle policy to KBL platform.

Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add KBL platform definition.

Add KBL platform definition.

Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add mdev device attribute group

This adds initial attribute group for mdev to hold vGPU related
for each mdev device, currently just vGPU id is shown.

v2: rename group name as "intel_vgpu"

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>

drm/i915/gvt: make dpcd_fix_data supports DP1.2

GVT-g will emulate a fixed DPCD data to VM for DP/eDP panel. Update
this data to latest DP1.2 with the maximum lane bandwidth of 5.4G/s
to support 4K resolution in VM.

V3: modify patch comment
V2: add inline comment to describe the dpcd_fix_data.

Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: emulate SKL_FUSE_STATUS and LCPLL_CTL for virtual monitor detection

Initialize the correct vreg for virtual monitor.
Set PG0/1/2 distribution and fuse download done in SKL_FUSE_STATUS.
Set PLL_ENABLE and PLL_LOCK in LCPLL_CTL.
Guest may need to check these registers for display monitor detection
on Skylake platforms.

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge drm-next one more because Dave fumbled the conflict
resolution slightly and I didn't notice it. We need Zhenyu's hotfix
before he can assemble the gvt pull ...

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915/gvt: fix error return check for copy_gma_to_hva()

From commit 73dec95e6ba3 ("drm/i915: Emit to ringbuffer directly"),
copy_gma_to_hva() now returns copied data length instead of 0, so
need to change error return check for that.

Note: Looks this is caused by backmerge conflict resolving, so
4.11-rc4 is not impacted as commit 73dec95e6ba3 ("drm/i915: Emit to
ringbuffer directly") is not in 4.11. But need to fix this before I
can apply 4.12 stuff against drm-intel-next correctly.

Fixes: e5c1ff14757a ("Backmerge tag 'v4.11-rc4' into drm-next")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915/dp: reduce link M/N parameters

Several major vendor USB-C->HDMI converters, in particular the DA200,
fail to recover a 5.4 GHz 1 lane signal if the link N is greater than
0x80000.

The link M and N depend on the pixel clock and link clock ratio. With
current code link N exceeds 0x80000 only when link clock >= 540000
kHz. Except for the eDP intermediate link clocks, at least the four
least significant bits are always zero. Just one bit shift right would
be enough to bring even the DP 1.4 810000 kHz link clock under 0x80000
link N. The pixel clock for modes that require a link clock >= 540000
kHz would also have several least significant bits zero. Unless the user
provides a mode with an odd pixel clock value, we can reduce the numbers
to reach the goal, with no loss in precision.

The DP spec even mentions sources making choices that "allow for static
and relatively small Mvid and Nvid values", thus reducing the link M/N
regardless of the sink in question seems justified.

Everything here is based on the work and information gathered by Clint
Taylor <clinton.a.taylor@intel.com>. This is just an iteration to reduce
the parameters regardless of lane count, link rate, or sink.

Reference: http://patchwork.freedesktop.org/patch/msgid/1490225256-11667-1-git-send-email-clinton.a.taylor@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93578
Tested-by: Mads <mads@ab3.no>
Tested-by: PJ <foobar@pjmodos.net>
Tested-by: François Guerraz <kubrick@fgv6.net>
Tested-by: Lev Popov <leo@nabam.net>
Tested-by: Igor Krivenko <igor.s.krivenko@gmail.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490614405-23337-1-git-send-email-jani.nikula@intel.com

drm/i915: Take rpm wakelock around debugfs/i915_gpu_info

Capturing GPU state requires the device to be awake in order to read
registers. Normally, this is taken along the error handler, but for the
direct debugfs access, we cannot make assumptions about the current
device state and so either need to wake it up, or abort.

Fixes: 5a4c6f1b1b2d ("drm/i915: The return of i915_gpu_info to debugfs")
Testcase: igt/pm_rpm/debugfs-read
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328131407.14863-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: WARN if the core runtime PM get helpers fail

We don't expect the core runtime PM get helpers to return any error, so
add a WARN for this. Also print the return value for all the callsites
to help debugging.

v2:
- Don't call pm_runtime_get_sync() as part of initing locals. (Chris)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1490693935-12638-1-git-send-email-imre.deak@intel.com

drm/i915/perf: remove user triggerable warn

Don't throw a warning if we are given an invalid property id. While
here let's also bring back Robert' original idea of catching unhandled
enumeration values at compile time.

Fixes: eec688e1420d ("drm/i915: Add i915 perf infrastructure")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203236.18276-1-matthew.auld@intel.com

drm/i915: update the firmware download URL

The old URL works but gives 301 Moved Permanently. Update.

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489574966-27200-1-git-send-email-jani.nikula@intel.com

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge drm-next to get at -rc4, which we need to land the 4.12 gvt
patches.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Backmerge tag 'v4.11-rc4' into drm-next

Linux 4.11-rc4

The i915 GVT team need the rc4 code to base some more code on.

drm/i915/perf: destroy stream on sample_flags mismatch

If we were to ever encounter a sample_flags mismatch we need to ensure
we destroy the stream when we bail.

Fixes: d79651522e89 ("drm/i915: Enable i915 perf stream for Haswell OA unit")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203459.18398-1-matthew.auld@intel.com

drm/i915: allow HDMI 2.0 clock rates

Geminilake has a native HDMI 2.0 controller, which is capable of
driving clocks upto 594Mhz. This patch updates the max tmds clock
limit for the same.

V2: rebase
V3: rebase
V4: added r-b from Ander
V5: rebase
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase

Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-7-git-send-email-shashank.sharma@intel.com

drm/i915: enable scrambling

Geminilake platform sports a native HDMI 2.0 controller, and is
capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec
mendates scrambling for these higher clocks, for reduced RF footprint.

This patch checks if the monitor supports scrambling, and if required,
enables it during the modeset.

V2: Addressed review comments from Ville:
 - Do not track scrambling status in DRM layer, track somewhere in
   driver like in intel_crtc_state.
 - Don't talk to monitor at such a low layer, set monitor scrambling
   in intel_enable_ddi() before enabling the port.

V3: Addressed review comments from Jani
 - In comments, function names, use "sink" instead of "monitor",
   so that the implementation could be close to the language of
   HDMI spec.

V4: Addressed review comment from Maarten
 - scrambling -> hdmi_scrambling
 - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio

V5: Addressed review comments from Ville and Ander
 - Do not modifiy the crtc_state after compute_config. Move all
   scrambling and tmds_clock_ratio calcutations to compute_config.
 - While setting scrambling for source/sink, do not check the
   conditions again, just go by the crtc_state flags. This will
   simplyfy the condition checks.

V6: Addressed review comments from Ville
 - Do not add IS_GLK check in disable/enable function, instead add it
   in compute_config, while setting state flags.
 - Remove unnecessary paranthesis.
 - Simplyfy handle_sink_scrambling function as suggested.
 - Add readout code for scrambling status in get_ddi_config and add a
   check for the same in pipe_config_compare.

V7: Addressed review comments from Ander/Ville
 - No separate function for source scrambling, make it inline
 - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK
 - Do not add platform check while setting source scrambling
 - Use pipe_config instead of crtc->config to set sink scrambling
 - To readout scrambling status, Compare with SCRAMBLING_MASK
   not any of its bits
 - Remove platform check in intel_pipe_config_compare while checking
   scrambling status

V8: Fixed mege conflict, Addressed review comments from Ander
 - Remove the desciption/comment about scrambling fom the caller, move
   it to the function
 - Move the IS_GLK check into scrambling function
 - Fix alignment

V9: Fixed review comments from Ville, Ander
 - Pass the scrambling state variables as bool input to the sink_scrambling
   function and let the disable call be unconditional.
 - Fix alignments in function calls and debug messages.
 - Add kernel doc for function intel_hdmi_handle_sink_scrambling

V10: Rebase

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com

drm/i915: kill intel_ddi_pll_select()

All it does is pick the encoder and call intel_get_shared_dpll(). We
can just do this in the caller. One less indirection level during code
reading.

As another plus, now the two callers of intel_get_shared_dpll() are
{ironlake,haswell}_crtc_compute_clock().

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-2-git-send-email-paulo.r.zanoni@intel.com

drm/i915: Mark manually wedged engines as guilty

Use the incoming value from debugfs/i915_wedged to select which engines
to marked as guilty in order to force us to reset those requests
(required to quickly bypass simulated hangs).

Testcase: igt/gem_exec_capture
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170325134735.30581-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Refactor tests for validity of RING_TAIL

Whilst I like having the assertions clearly visible in the code, they
are quite repetitious! As we find new limits we want to incorporate into
the set of assertions, it make sense to refactor them to a common
routine.

v2: Add a guc holdout.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327131412.20293-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Assert that the request->tail fits within the ring

In addition to being qword-aligned, the RING_TAIL offset must be within
the ring!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327130009.4678-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915/execlists: Wrap tail pointer after reset tweaking

If the request->wa_tail is 0 (because it landed exactly on the end of
the ringbuffer), when we reconstruct request->tail following a reset we
fill in an illegal value (-8 or 0x001ffff8). As a result, RING_HEAD is
never able to catch up with RING_TAIL and the GPU spins endlessly. If
the ring contains a couple of breadcrumbs, even our hangcheck is unable
to catch the busy-looping as the ACTHD and seqno continually advance.

v2: Move the wrap into a common intel_ring_wrap().

Fixes: a3aabe86a340 ("drm/i915/execlists: Reinitialise context image after GPU hang")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327130009.4678-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Use i9xx_check_plane_surface() for sprite planes as well

All the pre-SKL sprite planes compute the x/y/tile offsets in a
similar way. There are a couple of minor differences but the primary
planes have those as well. Thus i9xx_check_plane_surface()
already does what we need, so let's use it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Eliminate ironlake_update_primary_plane()

The effective difference between i9xx_update_primary_plane()
and ironlake_update_primary_plane() is only the HSW/BDW
DSPOFFSET special case. So bring that over into
i9xx_update_primary_plane() and eliminate the duplicated code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-6-ville.syrjala@linux.intel.com

drm/i915: Introduce i9xx_check_plane_surface()

Extract the primary plane surfae offset/x/y calculations for
pre-SKL platforms into a common function, and call it during the
atomic check phase to reduce the amount of stuff we have to do
during the commit phase. SKL is already doing this.

v2: Update the comment about the rotation adjustments to
    match the code better (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-5-ville.syrjala@linux.intel.com

drm/i915: Pre-compute plane control register value

Computing the plane control register value is branchy so moving it out
from the plane commit hook seems prudent. Let's pre-compute it during
the atomic check phase and store the result in the plane state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-4-ville.syrjala@linux.intel.com

drm/i915: Nuke ironlake_plane_ctl()

Share the code to compute the primary plane control register value
between the i9xx and ilk codepaths as the differences are minimal.
Actually there are no differences between g4x and ilk, so the
current split doesn't really make any sense.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Extract i9xx_plane_ctl() and ironlake_plane_ctl()

Pull the code to calculate the pre-SKL primary plane control register
value into separate functions. Allows us to pre-compute it in the
future.

v2: Split the pre-ilk vs. ilk+ unification to a separate patch (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use BIT() for computing the engine's flag

Since the engine's flag is just the bit of its id, use BIT().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Remove unused intel_flush_status_page()

intel_flush_status_page() is defunct since commit f8dd2934c4ec
("drm/i915: Remove BXT incoherent seqno write workaround"), time to
remove it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Fixup intel_write_status_page() for old CPUs without clflush

Not all of our target platforms have clflush. For those without, just
assume the status page is sufficiently coherent that we do not need our
paranoia.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 14a6bbf9e535 ("drm/i915: Replace irq_seqno_barrier on hws write with a clflush")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-1-chris@chris-wilson.co.uk
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Align "unfenced" tiled access on gen2, early gen3

Old devices have quite severe restrictions for using fences, and unlike
more recent device (anything from Pineview onwards) we need to enforce
those restrictions even for unfenced tiled access from the render
pipeline.

Fixes: 944397f04f24 ("drm/i915: Store required fence size/alignment for GGTT vma")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170325113243.16438-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Limit number of reads to stabilize rc6 counter reads

We have only 8bits of precise timestamps in which to complete our
upper/load reads, along with the switch between precision. This is not
always enough time to read the upper counter twice within the same time
slice, leading to hard lockups. Limit the number of times to prevent
an inifite loop (my fault for assuming we would have no trouble doing
the write + reads fast enough).

Fixes: 47c21d9a1a7b ("drm/i915: Extend vlv/chv residency resolution")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100377
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324165418.7455-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Check we have an wake device before flushing GTT writes

We can assume that if the device is asleep then all pending GTT writes
will have been posted, and so we can defer the flush from
i915_gem_object_flush_gtt_write_domain()

[ 1957.462568] WARNING: CPU: 0 PID: 6132 at drivers/gpu/drm/i915/intel_drv.h:1742 fwtable_read32+0x123/0x150 [i915]
[ 1957.462582] RPM wakelock ref not held during HW access
[ 1957.462583] Modules linked in: i915 intel_gtt drm_kms_helper prime_numbers
[ 1957.462607] CPU: 0 PID: 6132 Comm: gem_concurrent_ Tainted: G     U          4.11.0-rc1+ #464
[ 1957.462619] Hardware name:                  /        , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[ 1957.462630] Call Trace:
[ 1957.462646]  dump_stack+0x4d/0x6f
[ 1957.462657]  __warn+0xc1/0xe0
[ 1957.462667]  warn_slowpath_fmt+0x4a/0x50
[ 1957.462709]  fwtable_read32+0x123/0x150 [i915]
[ 1957.462750]  i915_gem_object_flush_gtt_write_domain+0x43/0x70 [i915]
[ 1957.462791]  i915_gem_object_set_to_cpu_domain+0x46/0xa0 [i915]
[ 1957.462831]  i915_gem_set_domain_ioctl+0x15d/0x220 [i915]
[ 1957.462843]  drm_ioctl+0x1d7/0x440
[ 1957.462885]  ? i915_gem_obj_prepare_shmem_write+0x1d0/0x1d0 [i915]
[ 1957.462896]  ? pick_next_task_fair+0x436/0x440
[ 1957.462906]  ? mntput+0x1f/0x30
[ 1957.462915]  do_vfs_ioctl+0x8f/0x5c0
[ 1957.462925]  ? __schedule+0x16f/0x5f0
[ 1957.462935]  ? ____fput+0x9/0x10
[ 1957.462943]  SyS_ioctl+0x3c/0x70
[ 1957.462952]  entry_SYSCALL_64_fastpath+0x17/0x98
[ 1957.462961] RIP: 0033:0x7fc542179ca7
[ 1957.462968] RSP: 002b:00007ffeef12ff98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 1957.462982] RAX: ffffffffffffffda RBX: 00007ffeef1301d0 RCX: 00007fc542179ca7
[ 1957.462990] RDX: 00007ffeef12ffd0 RSI: 00000000400c645f RDI: 0000000000000003
[ 1957.462999] RBP: 0000000000000003 R08: 000055f433bc7c40 R09: 000000000000002c
[ 1957.463006] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000018
[ 1957.463015] R13: 000055f432c89d20 R14: 000055f432c87690 R15: 0000000000000000

Fixes: 3b5724d702ef ("drm/i915: Wait for writes through the GTT to land before reading back")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323150053.28582-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/execlists: Trim irq handler

I noticed that gcc was spilling the CSB to the stack, so rearrange the
code to be more compact. Spilling in this function is slightly more
interesting due to the mmio reads acting as memory barriers and so
end up flushing the stack spills. Still miniscule to having to do at
least the pair of uncached reads :(

function                                     old     new   delta
intel_lrc_irq_handler                       1039     878    -161

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170325201053.21306-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/uc: Make intel_uc_prepare_fw() static

There is no need to expose this function as it is called from
one function only. Also move it up to avoid forward declaration.

v2: drop intel_ prefix (Oscar) and rename to fetch_uc_fw (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327094510.167400-1-michal.wajdeczko@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Linux 4.11-rc4

Merge tag 'char-misc-4.11-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "A smattering of different small fixes for some random driver
  subsystems. Nothing all that major, just resolutions for reported
  issues and bugs.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  extcon: int3496: Set the id pin to direction-input if necessary
  extcon: int3496: Use gpiod_get instead of gpiod_get_index
  extcon: int3496: Add dependency on X86 as it's Intel specific
  extcon: int3496: Add GPIO ACPI mapping table
  extcon: int3496: Rename GPIO pins in accordance with binding
  vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly
  ppdev: fix registering same device name
  parport: fix attempt to write duplicate procfiles
  auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches
  Drivers: hv: vmbus: Don't leak memory when a channel is rescinded
  Drivers: hv: vmbus: Don't leak channel ids
  Drivers: hv: util: don't forget to init host_ts.lock
  Drivers: hv: util: move waiting for release to hv_utils_transport itself
  vmbus: remove hv_event_tasklet_disable/enable
  vmbus: use rcu for per-cpu channel list
  mei: don't wait for os version message reply
  mei: fix deadlock on mei reset
  intel_th: pci: Add Gemini Lake support
  intel_th: pci: Add Denverton SOC support
  intel_th: Don't leak module refcount on failure to activate
  ...

Merge tag 'driver-core-4.11-rc4' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single kernfs fix for 4.11-rc4 that resolves a reported
  issue.

  It has been in linux-next with no reported issues"

* tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()

Merge tag 'tty-4.11-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some tty and serial driver fixes for 4.11-rc4.

  One of these fix a long-standing issue in the ldisc code that was
  found by Dmitry Vyukov with his great fuzzing work. The other fixes
  resolve other reported issues, and there is one revert of a patch in
  4.11-rc1 that wasn't correct.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix data race in tty_ldisc_ref_wait()
  tty: don't panic on OOM in tty_set_ldisc()
  Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"
  tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision
  serial: 8250_dw: Fix breakage when HAVE_CLK=n
  serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios

Merge tag 'staging-4.11-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes for 4.11-rc4 that resolve a
  number of tiny reported issues. All of these have been in linux-next
  for a while with no reported issues"

* tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration
  iio: adc: ti_am335x_adc: fix fifo overrun recovery
  iio: sw-device: Fix config group initialization
  iio: magnetometer: ak8974: remove incorrect __exit markups
  iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3

Merge tag 'usb-4.11-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB/PHY fixes from Greg KH:
 "Here are a number of small USB and PHY driver fixes for 4.11-rc4.

  Nothing major here, just an bunch of small fixes, and a handfull of
  good fixes from Johan for devices with crazy descriptors. There are a
  few new device ids in here as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held
  usb: gadget: udc: remove pointer dereference after free
  usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
  usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
  usb: gadget: acm: fix endianness in notifications
  usb: dwc3: gadget: delay unmap of bounced requests
  USB: serial: qcserial: add Dell DW5811e
  usb: hub: Fix crash after failure to read BOS descriptor
  ACM gadget: fix endianness in notifications
  USB: usbtmc: fix probe error path
  USB: usbtmc: add missing endpoint sanity check
  USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
  usb: musb: fix possible spinlock deadlock
  usb: musb: dsps: fix iounmap in error and exit paths
  usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
  usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
  uwb: i1480-dfu: fix NULL-deref at probe
  uwb: hwa-rc: fix NULL-deref at probe
  USB: wusbcore: fix NULL-deref at probe
  USB: uss720: fix NULL-deref at probe
  ...

Merge tag 'powerpc-4.11-6' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc fixes from Michael Ellerman:
 "These are all pretty minor. The fix for idle wakeup would be a bad bug
  but has not been observed in practice.

  The update to the gcc-plugins docs was Cc'ed to Kees and Jon, Kees
  OK'ed it going via powerpc and I didn't hear from Jon.

   - cxl: Route eeh events to all slices for pci_channel_io_perm_failure state

   - powerpc/64s: Fix idle wakeup potential to clobber registers

   - Revert "powerpc/64: Disable use of radix under a hypervisor"

   - gcc-plugins: update architecture list in documentation

  Thanks to: Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav
  Jain"

* tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  gcc-plugins: update architecture list in documentation
  Revert "powerpc/64: Disable use of radix under a hypervisor"
  powerpc/64s: Fix idle wakeup potential to clobber registers
  cxl: Route eeh events to all slices for pci_channel_io_perm_failure state

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix a memory leak on an error path, and two races when modifying
  inodes relating to the inline_data and metadata checksum features"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix two spelling nits
  ext4: lock the xattr block before checksuming it
  jbd2: don't leak memory if setting up journal fails
  ext4: mark inode dirty after converting inline directory

Merge tag 'fscrypt-for-linus_stable' of git://git./linux/kernel/git/tytso/fscrypt

Pull fscrypto fixes from Ted Ts'o:
 "A code cleanup and bugfix for fs/crypto"

* tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
  fscrypt: eliminate ->prepare_context() operation
  fscrypt: remove broken support for detecting keyring key revocation

Merge tag 'hwmon-for-linus-v4.11-rc4' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - bug fixes in asus_atk0110, it87 and max31790 drivers

 - added missing API definition to hwmon core

* tag 'hwmon-for-linus-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (asus_atk0110) fix uninitialized data access
  hwmon: Add missing HWMON_T_ALARM
  hwmon: (it87) Avoid registering the same chip on both SIO addresses
  hwmon: (max31790) Set correct PWM value

Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:
 "This has been a slow -rc cycle for the RDMA subsystem. We really
  haven't had a lot of rc fixes come in. This pull request is the first
  of this entire rc cycle and it has all of the suitable fixes so far
  and it's still only about 20 patches. The fix for the minor breakage
  cause by the dma mapping patchset is in here, as well as a couple
  other potential oops fixes, but the rest is more minor.

  Summary:

   - fix for dma_ops change in this kernel, resolving the s390, powerpc,
     and IOMMU operation

   - a few other oops fixes

   - the rest are all minor fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/qib: fix false-postive maybe-uninitialized warning
  RDMA/iser: Fix possible mr leak on device removal event
  IB/device: Convert ib-comp-wq to be CPU-bound
  IB/cq: Don't process more than the given budget
  IB/rxe: increment msn only when completing a request
  uapi: fix rdma/mlx5-abi.h userspace compilation errors
  IB/core: Restore I/O MMU, s390 and powerpc support
  IB/rxe: Update documentation link
  RDMA/ocrdma: fix a type issue in ocrdma_put_pd_num()
  IB/rxe: double free on error
  RDMA/vmw_pvrdma: Activate device on ethernet link up
  RDMA/vmw_pvrdma: Dont hardcode QP header page
  RDMA/vmw_pvrdma: Cleanup unused variables
  infiniband: Fix alignment of mmap cookies to support VIPT caching
  IB/core: Protect against self-requeue of a cq work item
  i40iw: Receive netdev events post INET_NOTIFIER state

Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit

Pull audit fix from Paul Moore:
 "We've got an audit fix, and unfortunately it is big.

  While I'm not excited that we need to be sending you something this
  large during the -rcX phase, it does fix some very real, and very
  tangled, problems relating to locking, backlog queues, and the audit
  daemon connection.

  This code has passed our testsuite without problem and it has held up
  to my ad-hoc stress tests (arguably better than the existing code),
  please consider pulling this as fix for the next v4.11-rcX tag"

* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
  audit: fix auditd/kernel connection state tracking

ext4: fix two spelling nits

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: lock the xattr block before checksuming it

We must lock the xattr block before calculating or verifying the
checksum in order to avoid spurious checksum failures.

https://bugzilla.kernel.org/show_bug.cgi?id=193661

Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A handful of Sunxi and Rockchip clk driver fixes and a core framework
  one where we need to copy a string because we can't guarantee it isn't
  freed sometime later"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: fix recalc_rate formula of NKMP clocks
  clk: sunxi-ng: Fix div/mult settings for osc12M on A64
  clk: rockchip: Make uartpll a child of the gpll on rk3036
  clk: rockchip: add "," to mux_pll_src_apll_dpll_gpll_usb480m_p on rk3036
  clk: core: Copy connection id
  dt-bindings: arm: update Armada CP110 system controller binding
  clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock
  clk: sunxi: ccu-sun5i needs nkmp
  clk: sunxi-ng: mp: Adjust parent rate for pre-dividers

IB/qib: fix false-postive maybe-uninitialized warning

aarch64-linux-gcc-7 complains about code it doesn't fully understand:

drivers/infiniband/hw/qib/qib_iba7322.c: In function 'qib_7322_txchk_change':
include/asm-generic/bitops/non-atomic.h:105:35: error: 'shadow' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The code is right, and despite trying hard, I could not come up with a version
that I liked better than just adding a fake initialization here to shut up the
warning.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iser: Fix possible mr leak on device removal event

When the rdma device is removed, we must cleanup all
the rdma resources within the DEVICE_REMOVAL event
handler to let the device teardown gracefully. When
this happens with live I/O, some memory regions are
occupied. Thus, track them too and dereg all the mr's.

We are safe with mr access by iscsi_iser_cleanup_task.

Reported-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/device: Convert ib-comp-wq to be CPU-bound

This workqueue is used by our storage target mode ULPs
via the new CQ API. Recent observations when working
with very high-end flash storage devices reveal that
UNBOUND workqueue threads can migrate between cpu cores
and even numa nodes (although some numa locality is accounted
for).

While this attribute can be useful in some workloads,
it does not fit in very nicely with the normal
run-to-completion model we usually use in our target-mode
ULPs and the block-mq irq<->cpu affinity facilities.

The whole block-mq concept is that the completion will
land on the same cpu where the submission was performed.
The fact that our submitter thread is migrating cpus
can break this locality.

We assume that as a target mode ULP, we will serve multiple
initiators/clients and we can spread the load enough without
having to use unbound kworkers.

Also, while we're at it, expose this workqueue via sysfs which
is harmless and can be useful for debug.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/cq: Don't process more than the given budget

The caller might not want this overhead.

Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: increment msn only when completing a request

According to C9-147, MSN should only be incremented when the last packet of
a multi packet request has been received.

"Logically, the requester associates a sequential Send Sequence Number
(SSN) with each WQE posted to the send queue. The SSN bears a one-
to-one relationship to the MSN returned by the responder in each re-
sponse packet. Therefore, when the requester receives a response, it in-
terprets the MSN as representing the SSN of the most recent request
completed by the responder to determine which send WQE(s) can be
completed."

Fixes: 8700e3e7c485 ("Soft RoCE driver")

Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

uapi: fix rdma/mlx5-abi.h userspace compilation errors

Consistently use types from linux/types.h to fix the following
rdma/mlx5-abi.h userspace compilation errors:

/usr/include/rdma/mlx5-abi.h:69:25: error: 'u64' undeclared here (not in a function)
  MLX5_LIB_CAP_4K_UAR = (u64)1 << 0,
/usr/include/rdma/mlx5-abi.h:69:29: error: expected ',' or '}' before numeric constant
  MLX5_LIB_CAP_4K_UAR = (u64)1 << 0,

Include <linux/if_ether.h> to fix the following rdma/mlx5-abi.h
userspace compilation error:

/usr/include/rdma/mlx5-abi.h:286:12: error: 'ETH_ALEN' undeclared here (not in a function)
  __u8 dmac[ETH_ALEN];

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>