ceph: fix buffer free while holding i_ceph_lock in fill_inode()

[ Upstream commit af8a85a41734f37b67ba8ce69d56b685bee4ac48 ]

Calling ceph_buffer_put() in fill_inode() may result in freeing the
i_xattrs.blob buffer while holding the i_ceph_lock.  This can be fixed by
postponing the call until later, when the lock is released.

The following backtrace was triggered by fstests generic/070.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
  in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4
  6 locks held by kworker/0:4/3852:
   #0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0
   #1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0
   #2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476
   #3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476
   #4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476
   #5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70
  CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ #441
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
  Workqueue: ceph-msgr ceph_con_workfn
  Call Trace:
   dump_stack+0x67/0x90
   ___might_sleep.cold+0x9f/0xb1
   vfree+0x4b/0x60
   ceph_buffer_release+0x1b/0x60
   fill_inode.isra.0+0xa9b/0xf70
   ceph_fill_trace+0x13b/0xc70
   ? dispatch+0x2eb/0x1476
   dispatch+0x320/0x1476
   ? __mutex_unlock_slowpath+0x4d/0x2a0
   ceph_con_workfn+0xc97/0x2ec0
   ? process_one_work+0x1b8/0x5f0
   process_one_work+0x244/0x5f0
   worker_thread+0x4d/0x3e0
   kthread+0x105/0x140
   ? process_one_work+0x5f0/0x5f0
   ? kthread_park+0x90/0x90
   ret_from_fork+0x3a/0x50

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob()

[ Upstream commit 12fe3dda7ed89c95cc0ef7abc001ad1ad3e092f8 ]

Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in
freeing the i_xattrs.blob buffer while holding the i_ceph_lock.  This can
be fixed by having this function returning the old blob buffer and have
the callers of this function freeing it when the lock is released.

The following backtrace was triggered by fstests generic/117.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
  in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress
  4 locks held by fsstress/649:
   #0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0
   #1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60
   #2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60
   #3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60
  CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x67/0x90
   ___might_sleep.cold+0x9f/0xb1
   vfree+0x4b/0x60
   ceph_buffer_release+0x1b/0x60
   __ceph_build_xattrs_blob+0x12b/0x170
   __send_cap+0x302/0x540
   ? __lock_acquire+0x23c/0x1e40
   ? __mark_caps_flushing+0x15c/0x280
   ? _raw_spin_unlock+0x24/0x30
   ceph_check_caps+0x5f0/0xc60
   ceph_flush_dirty_caps+0x7c/0x150
   ? __ia32_sys_fdatasync+0x20/0x20
   ceph_sync_fs+0x5a/0x130
   iterate_supers+0x8f/0xf0
   ksys_sync+0x4f/0xb0
   __ia32_sys_sync+0xa/0x10
   do_syscall_64+0x50/0x1c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7fc6409ab617

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix buffer free while holding i_ceph_lock in __ceph_setxattr()

[ Upstream commit 86968ef21596515958d5f0a40233d02be78ecec0 ]

Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the
i_xattrs.prealloc_blob buffer while holding the i_ceph_lock.  This can be
fixed by postponing the call until later, when the lock is released.

The following backtrace was triggered by fstests generic/117.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
  in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress
  3 locks held by fsstress/650:
   #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50
   #1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0
   #2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810
  CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x67/0x90
   ___might_sleep.cold+0x9f/0xb1
   vfree+0x4b/0x60
   ceph_buffer_release+0x1b/0x60
   __ceph_setxattr+0x2b4/0x810
   __vfs_setxattr+0x66/0x80
   __vfs_setxattr_noperm+0x59/0xf0
   vfs_setxattr+0x81/0xa0
   setxattr+0x115/0x230
   ? filename_lookup+0xc9/0x140
   ? rcu_read_lock_sched_held+0x74/0x80
   ? rcu_sync_lockdep_assert+0x2e/0x60
   ? __sb_start_write+0x142/0x1a0
   ? mnt_want_write+0x20/0x50
   path_setxattr+0xba/0xd0
   __x64_sys_lsetxattr+0x24/0x30
   do_syscall_64+0x50/0x1c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7ff23514359a

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx4: Fix memory leaks

[ Upstream commit 5c1baaa82cea2c815a5180ded402a7cd455d1810 ]

In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through
kcalloc(). However, it is not always deallocated in the following execution
if an error occurs, leading to memory leaks. To fix this issue, free
'tun_qp->tx_ring' whenever an error occurs.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/1566159781-4642-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Tools: hv: kvp: eliminate 'may be used uninitialized' warning

[ Upstream commit 89eb4d8d25722a0a0194cf7fa47ba602e32a6da7 ]

When building hv_kvp_daemon GCC-8.3 complains:

hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’:
hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  struct hv_kvp_ipaddr_value *ip_buffer;

this seems to be a false positive: we only use ip_buffer when
op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE.

Silence the warning by initializing ip_buffer to NULL.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: hyperv-keyboard: Use in-place iterator API in the channel callback

[ Upstream commit d09bc83640d524b8467a660db7b1d15e6562a1de ]

Simplify the ring buffer handling with the in-place API.

Also avoid the dynamic allocation and the memory leak in the channel
callback function.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: cp2112: prevent sleeping function called from invalid context

[ Upstream commit 2d05dba2b25ecb0f8fc3a0b4eb2232da6454a47b ]

When calling request_threaded_irq() with a CP2112, the function
cp2112_gpio_irq_startup() is called in a IRQ context.

Therefore we can not sleep, and we can not call
cp2112_gpio_direction_input() there.

Move the call to cp2112_gpio_direction_input() earlier to have a working
driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kprobes: Fix potential deadlock in kprobe_optimizer()

[ Upstream commit f1c6ece23729257fb46562ff9224cf5f61b818da ]

lockdep reports the following deadlock scenario:

 WARNING: possible circular locking dependency detected

 kworker/1:1/48 is trying to acquire lock:
 000000008d7a62b2 (text_mutex){+.+.}, at: kprobe_optimizer+0x163/0x290

 but task is already holding lock:
 00000000850b5e2d (module_mutex){+.+.}, at: kprobe_optimizer+0x31/0x290

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (module_mutex){+.+.}:
        __mutex_lock+0xac/0x9f0
        mutex_lock_nested+0x1b/0x20
        set_all_modules_text_rw+0x22/0x90
        ftrace_arch_code_modify_prepare+0x1c/0x20
        ftrace_run_update_code+0xe/0x30
        ftrace_startup_enable+0x2e/0x50
        ftrace_startup+0xa7/0x100
        register_ftrace_function+0x27/0x70
        arm_kprobe+0xb3/0x130
        enable_kprobe+0x83/0xa0
        enable_trace_kprobe.part.0+0x2e/0x80
        kprobe_register+0x6f/0xc0
        perf_trace_event_init+0x16b/0x270
        perf_kprobe_init+0xa7/0xe0
        perf_kprobe_event_init+0x3e/0x70
        perf_try_init_event+0x4a/0x140
        perf_event_alloc+0x93a/0xde0
        __do_sys_perf_event_open+0x19f/0xf30
        __x64_sys_perf_event_open+0x20/0x30
        do_syscall_64+0x65/0x1d0
        entry_SYSCALL_64_after_hwframe+0x49/0xbe

 -> #0 (text_mutex){+.+.}:
        __lock_acquire+0xfcb/0x1b60
        lock_acquire+0xca/0x1d0
        __mutex_lock+0xac/0x9f0
        mutex_lock_nested+0x1b/0x20
        kprobe_optimizer+0x163/0x290
        process_one_work+0x22b/0x560
        worker_thread+0x50/0x3c0
        kthread+0x112/0x150
        ret_from_fork+0x3a/0x50

 other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(module_mutex);
                                lock(text_mutex);
                                lock(module_mutex);
   lock(text_mutex);

  *** DEADLOCK ***

As a reproducer I've been using bcc's funccount.py
(https://github.com/iovisor/bcc/blob/master/tools/funccount.py),
for example:

 # ./funccount.py '*interrupt*'

That immediately triggers the lockdep splat.

Fix by acquiring text_mutex before module_mutex in kprobe_optimizer().

Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d5b844a2cf50 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()")
Link: http://lkml.kernel.org/r/20190812184302.GA7010@xps-13
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ravb: Fix use-after-free ravb_tstamp_skb

[ Upstream commit cfef46d692efd852a0da6803f920cc756eea2855 ]

When a Tx timestamp is requested, a pointer to the skb is stored in the
ravb_tstamp_skb struct. This was done without an skb_get. There exists
the possibility that the skb could be freed by ravb_tx_free (when
ravb_tx_free is called from ravb_start_xmit) before the timestamp was
processed, leading to a use-after-free bug.

Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate
frees/consumes when a ravb_tstamp_skb struct is freed.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Tho Vu <tho.vu.wh@rvc.renesas.com>
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wimax/i2400m: fix a memory leak bug

[ Upstream commit 44ef3a03252844a8753479b0cea7f29e4a804bdc ]

In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup()
to hold the original command line options. Then, the options are parsed.
However, if an error occurs during the parsing process, 'options_orig' is
not deallocated, leading to a memory leak bug. To fix this issue, free
'options_orig' before returning the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: kalmia: fix memory leaks

[ Upstream commit f1472cb09f11ddb41d4be84f0650835cb65a9073 ]

In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through
kmalloc(). In the following execution, if the 'status' returned by
kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading
to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cx82310_eth: fix a memory leak bug

[ Upstream commit 1eca92eef18719027d394bf1a2d276f43e7cf886 ]

In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc().
Then, the execution waits for the firmware to become ready. If the firmware
is not ready in time, the execution is terminated. However, the allocated
'dev->partial_data' is not deallocated on this path, leading to a memory
leak bug. To fix this issue, free 'dev->partial_data' before returning the
error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfs: fix page locking deadlocks when deduping files

[ Upstream commit edc58dd0123b552453a74369bd0c8d890b497b4b ]

When dedupe wants to use the page cache to compare parts of two files
for dedupe, we must be very careful to handle locking correctly.  The
current code doesn't do this.  It must lock and unlock the page only
once if the two pages are the same, since the overlapping range check
doesn't catch this when blocksize < pagesize.  If the pages are distinct
but from the same file, we must observe page locking order and lock them
in order of increasing offset to avoid clashing with writeback locking.

Fixes: 876bec6f9bbfcb3 ("vfs: refactor clone/dedupe_file_range common functions")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lan78xx: Fix memory leaks

[ Upstream commit b9cbf8a64865b50fd0f4a3915fa00ac7365cdf8f ]

In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and
saved to 'dev->urb_intr'. However, in the following execution, if an error
occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix
this issue, invoke usb_free_urb() to free the allocated urb before
returning from the function.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: myri10ge: fix memory leaks

[ Upstream commit 20fb7c7a39b5c719e2e619673b5f5729ee7d2306 ]

In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices
related structures. Later on, myri10ge_request_irq() is used to get an irq.
However, if this process fails, the allocated slices related structures are
not deallocated, leading to memory leaks. To fix this issue, revise the
target label of the goto statement to 'abort_with_slices'.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

liquidio: add cleanup in octeon_setup_iq()

[ Upstream commit 6f967f8b1be7001b31c46429f2ee7d275af2190f ]

If oct->fn_list.enable_io_queues() fails, no cleanup is executed, leading
to memory/resource leaks. To fix this issue, invoke
octeon_delete_instr_queue() before returning from the function.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: fix a memory leak bug

[ Upstream commit c554336efa9bbc28d6ec14efbee3c7d63c61a34f ]

In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails,
leading to a memory leak bug. To fix this issue, free t before returning
the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: set DMA max segment size

[ Upstream commit 070955558e820b9a89c570b91b1f21762f62b288 ]

This driver requires imported PRIME buffers to appear contiguously in
its IO address space. Make sure this is the case by setting the maximum
DMA segment size to a more suitable value than the default 64KB.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: use correct device to import PRIME buffers

[ Upstream commit 4c6f3196e6ea111c456c6086dc3f57d4706b0b2d ]

PRIME buffers should be imported using the DMA device. To this end, use
a custom import function that mimics drm_gem_prime_import_dev(), but
passes the correct device.

Fixes: 119f5173628aa ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: Fix build error of function redefinition

[ Upstream commit 68e03b85474a51ec1921b4d13204782594ef7223 ]

when do randbuilding, I got this error:

In file included from drivers/hwmon/pmbus/ucd9000.c:19:0:
./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/hwmon/pmbus/ucd9000.c:18:0:
./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 964cb341882f ("gpio: move pincontrol calls to <linux/gpio/driver.h>")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmveth: Convert multicast list size for little-endian system

[ Upstream commit 66cf4710b23ab2adda11155684a2c8826f4fe732 ]

The ibm,mac-address-filters property defines the maximum number of
addresses the hypervisor's multicast filter list can support. It is
encoded as a big-endian integer in the OF device tree, but the virtual
ethernet driver does not convert it for use by little-endian systems.
As a result, the driver is not behaving as it should on affected systems
when a large number of multicast addresses are assigned to the device.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btqca: Add a short delay before downloading the NVM

[ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ]

On WCN3990 downloading the NVM sometimes fails with a "TLV response
size mismatch" error:

[  174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin
[  174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch

It seems the controller needs a short time after downloading the
firmware before it is ready for the NVM. A delay as short as 1 ms
seems sufficient, make it 10 ms just in case. No event is received
during the delay, hence we don't just silently drop an extra event.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tc35815: Explicitly check NET_IP_ALIGN is not zero in tc35815_rx

[ Upstream commit 125b7e0949d4e72b15c2b1a1590f8cece985a918 ]

clang warns:

drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical
'&&' with constant operand [-Wconstant-logical-operand]
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^  ~~~~~~~~~~~~
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a
bitwise operation
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^~
                                                  &
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to
silence this warning
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                 ~^~~~~~~~~~~~~~~
1 warning generated.

Explicitly check that NET_IP_ALIGN is not zero, which matches how this
is checked in other parts of the tree. Because NET_IP_ALIGN is a build
time constant, this check will be constant folded away during
optimization.

Fixes: 82a9928db560 ("tc35815: Enable StripCRC feature")
Link: https://github.com/ClangBuiltLinux/linux/issues/608
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_netvsc: Fix a warning of suspicious RCU usage

[ Upstream commit 6d0d779dca73cd5acb649c54f81401f93098b298 ]

This fixes a warning of "suspicious rcu_dereference_check() usage"
when nload runs.

Fixes: 776e726bfb34 ("netvsc: fix RCU warning in get_stats")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tundra: tsi108: use spin_lock_irqsave instead of spin_lock_irq in IRQ context

[ Upstream commit 8c25d0887a8bd0e1ca2074ac0c6dff173787a83b ]

As spin_unlock_irq will enable interrupts.
Function tsi108_stat_carry is called from interrupt handler tsi108_irq.
Interrupts are enabled in interrupt handler.
Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq
in IRQ context to avoid this.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.142

Revert "ASoC: Fail card instantiation if DAI format setup fails"

This reverts commit a56c79efe4dc8ae560eb2c9a4b755d57c8c2e8f4 which is
commit 40aa5383e393d72f6aa3943a4e7b1aae25a1e43b upstream.

Mark Brown writes:
I nacked this patch when Sasha posted it - it only improves
diagnostics and might make systems that worked by accident break
since it turns things into a hard failure, it won't make
anything that didn't work previously work.

Reported-by: Mark Brown <broonie@kernel.org>
Cc: Ricard Wanderlof <ricardw@axis.com>
Cc: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/lkml/20190904181027.GG4348@sirena.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/ptrace: fix up botched merge of spectrev1 fix

I incorrectly merged commit 31a2fbb390fe ("x86/ptrace: Fix possible
spectre-v1 in ptrace_get_debugreg()") when backporting it, as was
graciously pointed out at
https://grsecurity.net/teardown_of_a_failed_linux_lts_spectre_fix.php

Resolve the upstream difference with the stable kernel merge to properly
protect things.

Reported-by: Brad Spengler <spender@grsecurity.net>
Cc: Dianzhang Chen <dianzhangchen0@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <bp@alien8.de>
Cc: <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: piix4: Fix port selection for AMD Family 16h Model 30h

[ Upstream commit c7c06a1532f3fe106687ac82a13492c6a619ff1c ]

Family 16h Model 30h SMBus controller needs the same port selection fix
as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port
selection for AMD Family 17h chips")

commit 6befa3fde65f ("i2c: piix4: Support alternative port selection
register") also fixed the port selection for Hudson2, but unfortunately
this is not the exact same device and the AMD naming and PCI Device IDs
aren't particularly helpful here.

The SMBus port selection register is common to the following Families
and models, as documented in AMD's publicly available BIOS and Kernel
Developer Guides:

 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS)

The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared
between Bolton FCH and Family 16h Model 30h, but the location of the
SmBus0Sel port selection bits are different:

 51192 - Bolton Register Reference Guide

We distinguish between Bolton and Family 16h Model 30h using the PCI
Revision ID:

  Bolton is device 0x780b, revision 0x15
  Family 16h Model 30h is device 0x780b, revision 0x1F
  Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A.

The following additional public AMD BKDG documents were checked and do
not share the same port selection register:

 42301 - Family 15h Model 00h-0Fh doesn't mention any
 42300 - Family 15h Model 10h-1Fh doesn't mention any
 49125 - Family 15h Model 30h-3Fh doesn't mention any

 48751 - Family 16h Model 00h-0Fh uses the previously supported
         index register SB800_PIIX4_PORT_IDX_ALT at 0x2e

Signed-off-by: Andrew Cooks <andrew.cooks@opengear.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org [v4.6+]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Ensure O_DIRECT reports an error if the bytes read/written is 0

[ Upstream commit eb2c50da9e256dbbb3ff27694440e4c1900cfef8 ]

If the attempt to resend the I/O results in no bytes being read/written,
we must ensure that we report the error.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fixes: 0a00b77b331a ("nfs: mirroring support for direct io")
Cc: stable@vger.kernel.org # v3.20+
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Pass error information to the pgio error cleanup routine

[ Upstream commit df3accb849607a86278a37c35e6b313635ccc48b ]

Allow the caller to pass error information when cleaning up a failed
I/O request so that we can conditionally take action to cancel the
request altogether if the error turned out to be fatal.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pnfs: Fix a page lock leak in nfs_pageio_resend()

[ Upstream commit f4340e9314dbfadc48758945f85fc3b16612d06f ]

If the attempt to resend the pages fails, we need to ensure that we
clean up those pages that were not transmitted.

Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Clean up list moves of struct nfs_page

[ Upstream commit 078b5fd92c4913dd367361db6c28568386077c89 ]

In several places we're just moving the struct nfs_page from one list to
another by first removing from the existing list, then adding to the new
one.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI

[ Upstream commit 82e40f558de566fdee214bec68096bbd5e64a6a4 ]

A guest is not allowed to inject a SGI (or clear its pending state)
by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are
defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8).

Make sure we correctly emulate the architecture.

Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers")
Cc: stable@vger.kernel.org # 4.7+
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long

[ Upstream commit d4a8061a7c5f7c27a2dc002ee4cb89b3e6637e44 ]

If the ap_list is longer than 256 entries, merge_final() in list_sort()
will call the comparison callback with the same element twice, causing
a deadlock in vgic_irq_cmp().

Fix it by returning early when irqa == irqb.

Cc: stable@vger.kernel.org # 4.7+
Fixes: 8e4447457965 ("KVM: arm/arm64: vgic-new: Add IRQ sorting")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
[maz: massaged commit log and patch, added Fixes and Cc-stable]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S: Fix incorrect guest-to-user-translation error handling

[ Upstream commit ddfd151f3def9258397fcde7a372205a2d661903 ]

H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from
a guest. Although we verify correctness of TCEs before we do anything
with the existing tables, there is a small window when a check in
kvmppc_tce_validate might pass and right after that the guest alters
the page of TCEs, causing an early exit from the handler and leaving
srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap)
(real mode) locked.

This fixes the bug by jumping to the common exit code with an appropriate
unlock.

Cc: stable@vger.kernel.org # v4.11+
Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix possible sta leak

commit 5fd2f91ad483baffdbe798f8a08f1b41442d1e24 upstream.

If TDLS station addition is rejected, the sta memory is leaked.
Avoid this by moving the check before the allocation.

Cc: stable@vger.kernel.org
Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP")
Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "cfg80211: fix processing world regdomain when non modular"

commit 0d31d4dbf38412f5b8b11b4511d07b840eebe8cb upstream.

This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world
regdomain when non modular").

Re-triggering a reg_process_hint with the last request on all events,
can make the regulatory domain fail in case of multiple WiFi modules. On
slower boards (espacially with mdev), enumeration of the WiFi modules
can end up in an intersected regulatory domain, and user cannot set it
with 'iw reg set' anymore.

This is happening, because:
- 1st module enumerates, queues up a regulatory request
- request gets processed by __reg_process_hint_driver():
  - checks if previous was set by CORE -> yes
    - checks if regulator domain changed -> yes, from '00' to e.g. 'US'
      -> sends request to the 'crda'
- 2nd module enumerates, queues up a regulator request (which triggers
  the reg_todo() work)
- reg_todo() -> reg_process_pending_hints() sees, that the last request
  is not processed yet, so it tries to process it again.
  __reg_process_hint driver() will run again, and:
  - checks if the last request's initiator was the core -> no, it was
    the driver (1st WiFi module)
  - checks, if the previous initiator was the driver -> yes
    - checks if the regulator domain changed -> yes, it was '00' (set by
      core, and crda call did not return yet), and should be changed to 'US'

------> __reg_process_hint_driver calls an intersect

Besides, the reg_process_hint call with the last request is meaningless
since the crda call has a timeout work. If that timeout expires, the
first module's request will lost.

Cc: stable@vger.kernel.org
Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular")
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Ignore unconfigured CCP device on suspend/resume

commit 5871cd93692c8071fb9358daccb715b5081316ac upstream.

If a CCP is unconfigured (e.g. there are no available queues) then
there will be no data structures allocated for the device. Thus, we
must check for validity of a pointer before trying to access structure
members.

Fixes: 720419f01832f ("crypto: ccp - Introduce the AMD Secure Processor device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Release resource if the work is already queued

commit ba03a9bbd17b149c373c0ea44017f35fc2cd0f28 upstream.

Francois reported that VMware balloon gets stuck after a balloon reset,
when the VMCI doorbell is removed. A similar error can occur when the
balloon driver is removed with the following splat:

[ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds.
[ 1088.622035]       Tainted: G        W         5.2.0 #4
[ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1088.622205] modprobe        D    0  3565   1450 0x00000000
[ 1088.622210] Call Trace:
[ 1088.622246]  __schedule+0x2a8/0x690
[ 1088.622248]  schedule+0x2d/0x90
[ 1088.622250]  schedule_timeout+0x1d3/0x2f0
[ 1088.622252]  wait_for_completion+0xba/0x140
[ 1088.622320]  ? wake_up_q+0x80/0x80
[ 1088.622370]  vmci_resource_remove+0xb9/0xc0 [vmw_vmci]
[ 1088.622373]  vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci]
[ 1088.622379]  vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon]
[ 1088.622381]  vmballoon_exit+0x18/0xcc8 [vmw_balloon]
[ 1088.622394]  __x64_sys_delete_module+0x146/0x280
[ 1088.622408]  do_syscall_64+0x5a/0x130
[ 1088.622410]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1088.622415] RIP: 0033:0x7f54f62791b7
[ 1088.622421] Code: Bad RIP value.
[ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7
[ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68
[ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000
[ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68
[ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0

The cause for the bug is that when the "delayed" doorbell is invoked, it
takes a reference on the doorbell entry and schedules work that is
supposed to run the appropriate code and drop the doorbell entry
reference. The code ignores the fact that if the work is already queued,
it will not be scheduled to run one more time. As a result one of the
references would not be dropped. When the code waits for the reference
to get to zero, during balloon reset or module removal, it gets stuck.

Fix it. Drop the reference if schedule_work() indicates that the work is
already queued.

Note that this bug got more apparent (or apparent at all) due to
commit ce664331b248 ("vmw_balloon: VMCI_DOORBELL_SET does not check status").

Fixes: 83e2ec765be03 ("VMCI: doorbell implementation.")
Reported-by: Francois Rigault <rigault.francois@gmail.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Adit Ranadive <aditr@vmware.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Vishnu DASA <vdasa@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/20190820202638.49003-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest

commit 0a3dfbb5cd9033752639ef33e319c2f2863c713a upstream.

The following call trace may exist in linux guest dmesg when guest i915
driver is unloaded.
[   90.776610] [drm:vgt_deballoon_space.isra.0 [i915]] deballoon space: range [0x0 - 0x0] 0 KiB.
[   90.776621] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0
[   90.776691] IP: drm_mm_remove_node+0x4d/0x320 [drm]
[   90.776718] PGD 800000012c7d0067 P4D 800000012c7d0067 PUD 138e4c067 PMD 0
[   90.777091] task: ffff9adab60f2f00 task.stack: ffffaf39c0fe0000
[   90.777142] RIP: 0010:drm_mm_remove_node+0x4d/0x320 [drm]
[   90.777573] Call Trace:
[   90.777653]  intel_vgt_deballoon+0x4c/0x60 [i915]
[   90.777729]  i915_ggtt_cleanup_hw+0x121/0x190 [i915]
[   90.777792]  i915_driver_unload+0x145/0x180 [i915]
[   90.777856]  i915_pci_remove+0x15/0x20 [i915]
[   90.777890]  pci_device_remove+0x3b/0xc0
[   90.777916]  device_release_driver_internal+0x157/0x220
[   90.777945]  driver_detach+0x39/0x70
[   90.777967]  bus_remove_driver+0x51/0xd0
[   90.777990]  pci_unregister_driver+0x23/0x90
[   90.778019]  SyS_delete_module+0x1da/0x240
[   90.778045]  entry_SYSCALL_64_fastpath+0x24/0x87
[   90.778072] RIP: 0033:0x7f34312af067
[   90.778092] RSP: 002b:00007ffdea3da0d8 EFLAGS: 00000206
[   90.778297] RIP: drm_mm_remove_node+0x4d/0x320 [drm] RSP: ffffaf39c0fe3dc0
[   90.778344] ---[ end trace f4b1bc8305fc59dd ]---

Four drm_mm_node are used to reserve guest ggtt space, but some of them
may be skipped and not initialised due to space constraints in
intel_vgt_balloon(). If drm_mm_remove_node() is called with
uninitialized drm_mm_node, the above call trace occurs.

This patch check drm_mm_node's validity before calling
drm_mm_remove_node().

Fixes: ff8f797557c7("drm/i915: return the correct usable aperture size under gvt environment")
Cc: stable@vger.kernel.org
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1566279978-9659-1-git-send-email-xiong.y.zhang@intel.com
(cherry picked from commit 4776f3529d6b1e47f02904ad1d264d25ea22b27b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Tiger Lake support

commit 9c78255fdde45c6b9a1ee30f652f7b34c727f5c7 upstream.

This adds support for the Trace Hub in Tiger Lake PCH.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lore.kernel.org/r/20190821074955.3925-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add support for another Lewisburg PCH

commit 164eb56e3b64f3a816238d410c9efec7567a82ef upstream.

Add support for the Trace Hub in another Lewisburg PCH.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lore.kernel.org/r/20190821074955.3925-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Fix a double free of stm_source_device

commit 961b6ffe0e2c403b09a8efe4a2e986b3c415391a upstream.

In the error path of stm_source_register_device(), the kfree is
unnecessary, as the put_device() before it ends up calling
stm_source_device_release() to free stm_source_device, leading to
a double free at the outer kfree() call. Remove it.

Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 7bd1d4093c2fa ("stm class: Introduce an abstraction for System Trace Module devices")
Link: https://lore.kernel.org/linux-arm-kernel/1563354988-23826-1-git-send-email-dingxiang@cmss.chinamobile.com/
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20190821074955.3925-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix init of SD cards reporting an invalid VDD range

commit 72741084d903e65e121c27bd29494d941729d4a1 upstream.

The OCR register defines the supported range of VDD voltages for SD cards.
However, it has turned out that some SD cards reports an invalid voltage
range, for example having bit7 set.

When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from
the invalid VDD range, this triggers the core to run a power cycle of the
card to try to initialize it at the lowest common supported voltage.
Obviously this fails, since the card can't support it.

Let's fix this problem, by clearing invalid bits from the read OCR register
for SD cards, before proceeding with the VDD voltage negotiation.

Cc: stable@vger.kernel.org
Reported-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philip Langdale <philipl@overt.org>
Tested-by: Philip Langdale <philipl@overt.org>
Tested-by: Manuel Presnitz <mail@mpy.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-at91: add quirk for broken HS200

commit 7871aa60ae0086fe4626abdf5ed13eeddf306c61 upstream.

HS200 is not implemented in the driver, but the controller claims it
through caps. Remove it via a quirk, to make sure the mmc core do not try
to enable HS200, as it causes the eMMC initialization to fail.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uprobes/x86: Fix detection of 32-bit user mode

[ Upstream commit 9212ec7d8357ea630031e89d0d399c761421c83b ]

32-bit processes running on a 64-bit kernel are not always detected
correctly, causing the process to crash when uretprobes are installed.

The reason for the crash is that in_ia32_syscall() is used to determine the
process's mode, which only works correctly when called from a syscall.

In the case of uretprobes, however, the function is called from a exception
and always returns 'false' on a 64-bit kernel. In consequence this leads to
corruption of the process's return address.

Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which
is correct in any situation.

[ tglx: Add a comment and the following historical info ]

This should have been detected by the rename which happened in commit

  abfb9498ee13 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()")

which states in the changelog:

    The is_ia32_task()/is_x32_task() function names are a big misnomer: they
    suggests that the compat-ness of a system call is a task property, which
    is not true, the compatness of a system call purely depends on how it
    was invoked through the system call layer.
    .....

and then it went and blindly renamed every call site.

Sadly enough this was already mentioned here:

   8faaed1b9f50 ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and
arch_uretprobe_hijack_return_addr()")

where the changelog says:

    TODO: is_ia32_task() is not what we actually want, TS_COMPAT does
    not necessarily mean 32bit. Fortunately syscall-like insns can't be
    probed so it actually works, but it would be better to rename and
    use is_ia32_frame().

and goes all the way back to:

    0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")

Oh well. 7+ years until someone actually tried a uretprobe on a 32bit
process on a 64bit kernel....

Fixes: 0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")
Signed-off-by: Sebastian Mayr <me@sam.st>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190728152617.7308-1-me@sam.st
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: storage: ums-realtek: Whitelist auto-delink support

commit 1902a01e2bcc3abd7c9a18dc05e78c7ab4a53c54 upstream.

Auto-delink requires writing special registers to ums-realtek devices.
Unconditionally enable auto-delink may break newer devices.

So only enable auto-delink by default for the original three IDs,
0x0138, 0x0158 and 0x0159.

Realtek is working on a patch to properly support auto-delink for other
IDs.

BugLink: https://bugs.launchpad.net/bugs/1838886
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: storage: ums-realtek: Update module parameter description for auto_delink_en

commit f6445b6b2f2bb1745080af4a0926049e8bca2617 upstream.

The option named "auto_delink_en" is a bit misleading, as setting it to
false doesn't really disable auto-delink but let auto-delink be firmware
controlled.

Update the description to reflect the real usage of this parameter.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190827173450.13572-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci: rcar: Fix typo in compatible string matching

commit 636bd02a7ba9025ff851d0cfb92768c8fa865859 upstream.

It's spelled "renesas", not "renensas".

Due to this typo, RZ/G1M and RZ/G1N were not covered by the check.

Fixes: 2dc240a3308b ("usb: host: xhci: rcar: retire use of xhci_plat_type_is()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20190827125112.12192-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci: fix a race condition between shutdown and irq

commit a349b95d7ca0cea71be4a7dac29830703de7eb62 upstream.

This patch fixes an issue that the following error is
possible to happen when ohci hardware causes an interruption
and the system is shutting down at the same time.

[   34.851754] usb 2-1: USB disconnect, device number 2
[   35.166658] irq 156: nobody cared (try booting with the "irqpoll" option)
[   35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85
[   35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[   35.187886] Workqueue: usb_hub_wq hub_event
[   35.192063] Call trace:
[   35.194509]  dump_backtrace+0x0/0x150
[   35.198165]  show_stack+0x14/0x20
[   35.201475]  dump_stack+0xa0/0xc4
[   35.204785]  __report_bad_irq+0x34/0xe8
[   35.208614]  note_interrupt+0x2cc/0x318
[   35.212446]  handle_irq_event_percpu+0x5c/0x88
[   35.216883]  handle_irq_event+0x48/0x78
[   35.220712]  handle_fasteoi_irq+0xb4/0x188
[   35.224802]  generic_handle_irq+0x24/0x38
[   35.228804]  __handle_domain_irq+0x5c/0xb0
[   35.232893]  gic_handle_irq+0x58/0xa8
[   35.236548]  el1_irq+0xb8/0x180
[   35.239681]  __do_softirq+0x94/0x23c
[   35.243253]  irq_exit+0xd0/0xd8
[   35.246387]  __handle_domain_irq+0x60/0xb0
[   35.250475]  gic_handle_irq+0x58/0xa8
[   35.254130]  el1_irq+0xb8/0x180
[   35.257268]  kernfs_find_ns+0x5c/0x120
[   35.261010]  kernfs_find_and_get_ns+0x3c/0x60
[   35.265361]  sysfs_unmerge_group+0x20/0x68
[   35.269454]  dpm_sysfs_remove+0x2c/0x68
[   35.273284]  device_del+0x80/0x370
[   35.276683]  hid_destroy_device+0x28/0x60
[   35.280686]  usbhid_disconnect+0x4c/0x80
[   35.284602]  usb_unbind_interface+0x6c/0x268
[   35.288867]  device_release_driver_internal+0xe4/0x1b0
[   35.293998]  device_release_driver+0x14/0x20
[   35.298261]  bus_remove_device+0x110/0x128
[   35.302350]  device_del+0x148/0x370
[   35.305832]  usb_disable_device+0x8c/0x1d0
[   35.309921]  usb_disconnect+0xc8/0x2d0
[   35.313663]  hub_event+0x6e0/0x1128
[   35.317146]  process_one_work+0x1e0/0x320
[   35.321148]  worker_thread+0x40/0x450
[   35.324805]  kthread+0x124/0x128
[   35.328027]  ret_from_fork+0x10/0x18
[   35.331594] handlers:
[   35.333862] [<0000000079300c1d>] usb_hcd_irq
[   35.338126] [<0000000079300c1d>] usb_hcd_irq
[   35.342389] Disabling IRQ #156

ohci_shutdown() disables all the interrupt and rh_state is set to
OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable
OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF
is possible to be set by start_ed_unlink() which is called:
 ohci_irq()
  -> process_done_list()
   -> takeback_td()
    -> start_ed_unlink()

So, ohci_irq() has the following condition, the issue happens by
&ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and
ohci->rh_state = OHCI_RH_HALTED:

/* interrupt for some other device? */
if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
return IRQ_NOTMINE;

To fix the issue, ohci_shutdown() holds the spin lock while disabling
the interruption and changing the rh_state flag to prevent reenable
the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also
calls the ohci_shutdown() and it already held the spin lock, so that
the patch makes a new function as _ohci_shutdown().

This patch is inspired by a Renesas R-Car Gen3 BSP patch
from Tho Vu.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: udc: don't do hardware access if gadget has stopped

commit cbe85c88ce80fb92956a0793518d415864dcead8 upstream.

After _gadget_stop_activity is executed, we can consider the hardware
operation for gadget has finished, and the udc can be stopped and enter
low power mode. So, any later hardware operations (from usb_ep_ops APIs
or usb_gadget_ops APIs) should be considered invalid, any deinitializatons
has been covered at _gadget_stop_activity.

I meet this problem when I plug out usb cable from PC using mass_storage
gadget, my callstack like: vbus interrupt->.vbus_session->
composite_disconnect ->pm_runtime_put_sync(&_gadget->dev),
the composite_disconnect will call fsg_disable, but fsg_disable calls
usb_ep_disable using async way, there are register accesses for
usb_ep_disable. So sometimes, I get system hang due to visit register
without clock, sometimes not.

The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution.
See: http://marc.info/?l=linux-usb&m=138541769810983&w=2.

Cc: <stable@vger.kernel.org> #v4.9+
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-wdm: fix race between write and disconnect due to flag abuse

commit 1426bd2c9f7e3126e2678e7469dca9fd9fc6dd3e upstream.

In case of a disconnect an ongoing flush() has to be made fail.
Nevertheless we cannot be sure that any pending URB has already
finished, so although they will never succeed, they still must
not be touched.
The clean solution for this is to check for WDM_IN_USE
and WDM_DISCONNECTED in flush(). There is no point in ever
clearing WDM_IN_USE, as no further writes make sense.

The issue is as old as the driver.

Fixes: afba937e540c9 ("USB: CDC WDM driver")
Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add new JMS567 revision to unusual_devs

commit 08d676d1685c2a29e4d0e1b0242324e564d4589e upstream.

Revision 0x0117 suffers from an identical issue to earlier revisions,
therefore it should be added to the quirks list.

Signed-off-by: Henk van der Laan <opensource@henkvdlaan.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Check for empty hash and comment the race with registering probes

commit 372e0d01da71c84dcecf7028598a33813b0d5256 upstream.

The race between adding a function probe and reading the probes that exist
is very subtle. It needs a comment. Also, the issue can also happen if the
probe has has the EMPTY_HASH as its func_hash.

Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Check for successful allocation of hash

commit 5b0022dd32b7c2e15edf1827ba80aa1407edf9ff upstream.

In register_ftrace_function_probe(), we are not checking the return
value of alloc_and_copy_ftrace_hash(). The subsequent call to
ftrace_match_records() may end up dereferencing the same. Add a check to
ensure this doesn't happen.

Link: http://lkml.kernel.org/r/26e92574f25ad23e7cafa3cf5f7a819de1832cbe.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 1ec3a81a0cf42 ("ftrace: Have each function probe use its own ftrace_ops")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Fix NULL pointer dereference in t_probe_next()

commit 7bd46644ea0f6021dc396a39a8bfd3a58f6f1f9f upstream.

LTP testsuite on powerpc results in the below crash:

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc00000000029d800
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE SMP NR_CPUS=2048 NUMA PowerNV
  ...
  CPU: 68 PID: 96584 Comm: cat Kdump: loaded Tainted: G        W
  NIP:  c00000000029d800 LR: c00000000029dac4 CTR: c0000000001e6ad0
  REGS: c0002017fae8ba10 TRAP: 0300   Tainted: G        W
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 28022422  XER: 20040000
  CFAR: c00000000029d90c DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
  ...
  NIP [c00000000029d800] t_probe_next+0x60/0x180
  LR [c00000000029dac4] t_mod_start+0x1a4/0x1f0
  Call Trace:
  [c0002017fae8bc90] [c000000000cdbc40] _cond_resched+0x10/0xb0 (unreliable)
  [c0002017fae8bce0] [c0000000002a15b0] t_start+0xf0/0x1c0
  [c0002017fae8bd30] [c0000000004ec2b4] seq_read+0x184/0x640
  [c0002017fae8bdd0] [c0000000004a57bc] sys_read+0x10c/0x300
  [c0002017fae8be30] [c00000000000b388] system_call+0x5c/0x70

The test (ftrace_set_ftrace_filter.sh) is part of ftrace stress tests
and the crash happens when the test does 'cat
$TRACING_PATH/set_ftrace_filter'.

The address points to the second line below, in t_probe_next(), where
filter_hash is dereferenced:
  hash = iter->probe->ops.func_hash->filter_hash;
  size = 1 << hash->size_bits;

This happens due to a race with register_ftrace_function_probe(). A new
ftrace_func_probe is created and added into the func_probes list in
trace_array under ftrace_lock. However, before initializing the filter,
we drop ftrace_lock, and re-acquire it after acquiring regex_lock. If
another process is trying to read set_ftrace_filter, it will be able to
acquire ftrace_lock during this window and it will end up seeing a NULL
filter_hash.

Fix this by just checking for a NULL filter_hash in t_probe_next(). If
the filter_hash is NULL, then this probe is just being added and we can
simply return from here.

Link: http://lkml.kernel.org/r/05e021f757625cbbb006fad41380323dbe4e3b43.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic: Include the LDR when clearing out APIC registers

commit 558682b5291937a70748d36fd9ba757fb25b99ae upstream.

Although APIC initialization will typically clear out the LDR before
setting it, the APIC cleanup code should reset the LDR.

This was discovered with a 32-bit KVM guest jumping into a kdump
kernel. The stale bits in the LDR triggered a bug in the KVM APIC
implementation which caused the destination mapping for VCPUs to be
corrupted.

Note that this isn't intended to paper over the KVM APIC bug. The kernel
has to clear the LDR when resetting the APIC registers except when X2APIC
is enabled.

This lacks a Fixes tag because missing to clear LDR goes way back into pre
git history.

[ tglx: Made x2apic_enabled a function call as required ]

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic: Do not initialize LDR and DFR for bigsmp

commit bae3a8d3308ee69a7dbdf145911b18dfda8ade0d upstream.

Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The
bigsmp APIC implementation uses physical destination mode, but it
nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with
multiple bit being set.

This does not cause a functional problem because LDR and DFR are ignored
when physical destination mode is active, but it triggered a problem on a
32-bit KVM guest which jumps into a kdump kernel.

The multiple bits set unearthed a bug in the KVM APIC implementation. The
code which creates the logical destination map for VCPUs ignores the
disabled state of the APIC and ends up overwriting an existing valid entry
and as a result, APIC calibration hangs in the guest during kdump
initialization.

Remove the bogus LDR/DFR initialization.

This is not intended to work around the KVM APIC bug. The LDR/DFR
ininitalization is wrong on its own.

The issue goes back into the pre git history. The fixes tag is the commit
in the bitkeeper import which introduced bigsmp support in 2003.

  git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Fixes: db7b9e9f26b8 ("[PATCH] Clustered APIC setup for >8 CPU systems")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-2-bsd@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't update RIP or do single-step on faulting emulation

commit 75ee23b30dc712d80d2421a9a547e7ab6e379b44 upstream.

Don't advance RIP or inject a single-step #DB if emulation signals a
fault.  This logic applies to all state updates that are conditional on
clean retirement of the emulation instruction, e.g. updating RFLAGS was
previously handled by commit 38827dbd3fb85 ("KVM: x86: Do not update
EFLAGS on faulting emulation").

Not advancing RIP is likely a nop, i.e. ctxt->eip isn't updated with
ctxt->_eip until emulation "retires" anyways.  Skipping #DB injection
fixes a bug reported by Andy Lutomirski where a #UD on SYSCALL due to
invalid state with EFLAGS.TF=1 would loop indefinitely due to emulation
overwriting the #UD with #DB and thus restarting the bad SYSCALL over
and over.

Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: Andy Lutomirski <luto@kernel.org>
Fixes: 663f4c61b803 ("KVM: x86: handle singlestep during emulation")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: skip populating logical dest map if apic is not sw enabled

commit b14c876b994f208b6b95c222056e1deb0a45de0e upstream.

recalculate_apic_map does not santize ldr and it's possible that
multiple bits are set. In that case, a previous valid entry
can potentially be overwritten by an invalid one.

This condition is hit when booting a 32 bit, >8 CPU, RHEL6 guest and then
triggering a crash to boot a kdump kernel. This is the sequence of
events:
1. Linux boots in bigsmp mode and enables PhysFlat, however, it still
writes to the LDR which probably will never be used.
2. However, when booting into kdump, the stale LDR values remain as
they are not cleared by the guest and there isn't a apic reset.
3. kdump boots with 1 cpu, and uses Logical Destination Mode but the
logical map has been overwritten and points to an inactive vcpu.

Signed-off-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix potential concurrent access to the deleted pool

commit 75545304eba6a3d282f923b96a466dc25a81e359 upstream.

The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks.  Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.

Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Fix memory leak at line6_init_pcm() error path

commit 1bc8d18c75fef3b478dbdfef722aae09e2a9fde7 upstream.

I forgot to release the allocated object at the early error path in
line6_init_pcm().  For addressing it, slightly shuffle the code so
that the PCM destructor (pcm->private_free) is assigned properly
before all error paths.

Fixes: 3450121997ce ("ALSA: line6: Fix write on zero-sized buffer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n

commit 441e254cd40dc03beec3c650ce6ce6074bc6517f upstream.

Fixes: 701d678599d0c1 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: make sure EPOLLOUT wont be missed

[ Upstream commit ef8d8ccdc216f797e66cb4a1372f5c4c285ce1e4 ]

As Jason Baron explained in commit 790ba4566c1a ("tcp: set SOCK_NOSPACE
under memory pressure"), it is crucial we properly set SOCK_NOSPACE
when needed.

However, Jason patch had a bug, because the 'nonblocking' status
as far as sk_stream_wait_memory() is concerned is governed
by MSG_DONTWAIT flag passed at sendmsg() time :

    long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);

So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(),
and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE
cleared, if sk->sk_sndtimeo has been set to a small (but not zero)
value.

This patch removes the 'noblock' variable since we must always
set SOCK_NOSPACE if -EAGAIN is returned.

It also renames the do_nonblock label since we might reach this
code path even if we were in blocking mode.

Fixes: 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Reported-by: Vladimir Rutsky <rutsky@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: make sure EPOLLOUT is raised

[ Upstream commit 4651d1802f7063e4d8c0bcad957f46ece0c04024 ]

Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout
for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE
being set when -EAGAIN is returned to ensure that EPOLLOUT is raised.
Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can
use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior
that Eric Dumazet introduced for tcp sockets.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unit

commit daac07156b330b18eb5071aec4b3ddca1c377f2c upstream.

The `uac_mixer_unit_descriptor` shown as below is read from the
device side. In `parse_audio_mixer_unit`, `baSourceID` field is
accessed from index 0 to `bNrInPins` - 1, the current implementation
assumes that descriptor is always valid (the length  of descriptor
is no shorter than 5 + `bNrInPins`). If a descriptor read from
the device side is invalid, it may trigger out-of-bound memory
access.

```
struct uac_mixer_unit_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bUnitID;
__u8 bNrInPins;
__u8 baSourceID[];
}
```

This patch fixes the bug by add a sanity check on the length of
the descriptor.

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_term

commit 19bce474c45be69a284ecee660aa12d8f1e88f18 upstream.

`check_input_term` recursively calls itself with input from
device side (e.g., uac_input_terminal_descriptor.bCSourceID)
as argument (id). In `check_input_term`, if `check_input_term`
is called with the same `id` argument as the caller, it triggers
endless recursive call, resulting kernel space stack overflow.

This patch fixes the bug by adding a bitmap to `struct mixer_build`
to keep track of the checked ids and stop the execution if some id
has been checked (similar to how parse_audio_unit handles unitid
argument).

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tcp_rtx_queue_tail in case of empty retransmit queue

Commit 8c3088f895a0 ("tcp: be more careful in tcp_fragment()")
triggers following stack trace:

[25244.848046] kernel BUG at ./include/linux/skbuff.h:1406!
[25244.859335] RIP: 0010:skb_queue_prev+0x9/0xc
[25244.888167] Call Trace:
[25244.889182]  <IRQ>
[25244.890001]  tcp_fragment+0x9c/0x2cf
[25244.891295]  tcp_write_xmit+0x68f/0x988
[25244.892732]  __tcp_push_pending_frames+0x3b/0xa0
[25244.894347]  tcp_data_snd_check+0x2a/0xc8
[25244.895775]  tcp_rcv_established+0x2a8/0x30d
[25244.897282]  tcp_v4_do_rcv+0xb2/0x158
[25244.898666]  tcp_v4_rcv+0x692/0x956
[25244.899959]  ip_local_deliver_finish+0xeb/0x169
[25244.901547]  __netif_receive_skb_core+0x51c/0x582
[25244.903193]  ? inet_gro_receive+0x239/0x247
[25244.904756]  netif_receive_skb_internal+0xab/0xc6
[25244.906395]  napi_gro_receive+0x8a/0xc0
[25244.907760]  receive_buf+0x9a1/0x9cd
[25244.909160]  ? load_balance+0x17a/0x7b7
[25244.910536]  ? vring_unmap_one+0x18/0x61
[25244.911932]  ? detach_buf+0x60/0xfa
[25244.913234]  virtnet_poll+0x128/0x1e1
[25244.914607]  net_rx_action+0x12a/0x2b1
[25244.915953]  __do_softirq+0x11c/0x26b
[25244.917269]  ? handle_irq_event+0x44/0x56
[25244.918695]  irq_exit+0x61/0xa0
[25244.919947]  do_IRQ+0x9d/0xbb
[25244.921065]  common_interrupt+0x85/0x85
[25244.922479]  </IRQ>

tcp_rtx_queue_tail() (called by tcp_fragment()) can call
tcp_write_queue_prev() on the first packet in the queue, which will trigger
the BUG in tcp_write_queue_prev(), because there is no previous packet.

This happens when the retransmit queue is empty, for example in case of a
zero window.

Commit 8c3088f895a0 ("tcp: be more careful in tcp_fragment()") was not a
simple cherry-pick of the original one from master (b617158dc096)
because there is a specific TCP rtx queue only since v4.15. For more
details, please see the commit message of b617158dc096 ("tcp: be more
careful in tcp_fragment()").

The BUG() is hit due to the specific code added to versions older than
v4.15. The comment in skb_queue_prev() (include/linux/skbuff.h:1406),
just before the BUG_ON() somehow suggests to add a check before using
it, what Tim did.

In master, this code path causing the issue will not be taken because
the implementation of tcp_rtx_queue_tail() is different:

    tcp_fragment() → tcp_rtx_queue_tail() → tcp_write_queue_prev() →
skb_queue_prev() → BUG_ON()

Fixes: 8c3088f895a0 ("tcp: be more careful in tcp_fragment()")
Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tilcdc: Register cpufreq notifier after we have initialized crtc

[ Upstream commit 432973fd3a20102840d5f7e61af9f1a03c217a4c ]

Register cpufreq notifier after we have initialized the crtc and
unregister it before we remove the ctrc. Receiving a cpufreq notify
without crtc causes a crash.

Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix RX_TERMINATION_FORCE_ENABLE define value

[ Upstream commit ebcb8f8508c5edf428f52525cec74d28edea7bcb ]

Fix RX_TERMINATION_FORCE_ENABLE define value from 0x0089 to 0x00A9
according to MIPI Alliance MPHY specification.

Fixes: e785060ea3a1 ("ufs: definitions for phy interface")
Signed-off-by: Pedro Sousa <sousa@synopsys.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tfp410: fix memleak in get_modes()

[ Upstream commit c08f99c39083ab55a9c93b3e93cef48711294dad ]

We don't free the edid blob allocated by the call to drm_get_edid(),
causing a memleak. Fix this by calling kfree(edid) at the end of the
get_modes().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610135739.6077-1-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: bcm2835_wdt: Fix module autoload

[ Upstream commit 215e06f0d18d5d653d6ea269e4dfc684854d48bf ]

The commit 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe
to an MFD.") broke module autoloading on Raspberry Pi. So add a
module alias this fix this.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: hv: fix KVP and VSS daemons exit code

[ Upstream commit b0995156071b0ff29a5902964a9dc8cfad6f81c0 ]

HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: fotg2: restart hcd after port reset

[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ]

On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ast: Fixed reboot test may cause system hanged

[ Upstream commit 05b439711f6ff8700e8660f97a1179650778b9cb ]

There is another thread still access standard VGA I/O while loading drm driver.
Disable standard VGA I/O decode to avoid this issue.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: emev2: avoid race when unregistering slave client

[ Upstream commit d7437fc0d8291181debe032671a289b6bd93f46f ]

After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.

Fixes: c31d0a00021d ("i2c: emev2: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rcar: avoid race when unregistering slave client

[ Upstream commit 7b814d852af6944657c2961039f404c4490771c0 ]

After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.

Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/blkback: fix memory leaks

[ Upstream commit ae78ca3cf3d9e9f914bfcd0bc5c389ff18b9c2e0 ]

In read_per_ring_refs(), after 'req' and related memory regions are
allocated, xen_blkif_map() is invoked to map the shared frame, irq, and
etc. However, if this mapping process fails, no cleanup is performed,
leading to memory leaks. To fix this issue, invoke the cleanup before
returning the error.

Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt

[ Upstream commit 4a56a478a525d6427be90753451c40e1327caa1a ]

If fsg_disable() and fsg_set_alt() are called too closely to each
other (for example due to a quick reset/reconnect), what can happen
is that fsg_set_alt sets common->new_fsg from an interrupt while
handle_exception is trying to process the config change caused by
fsg_disable():

fsg_disable()
...
handle_exception()
sets state back to FSG_STATE_NORMAL
hasn't yet called do_set_interface()
or is inside it.

 ---> interrupt
fsg_set_alt
sets common->new_fsg
queues a new FSG_STATE_CONFIG_CHANGE
 <---

Now, the first handle_exception can "see" the updated
new_fsg, treats it as if it was a fsg_set_alt() response,
call usb_composite_setup_continue() etc...

But then, the thread sees the second FSG_STATE_CONFIG_CHANGE,
and goes back down the same path, wipes and reattaches a now
active fsg, and .. calls usb_composite_setup_continue() which
at this point is wrong.

Not only we get a backtrace, but I suspect the second set_interface
wrecks some state causing the host to get upset in my case.

This fixes it by replacing "new_fsg" by a "state argument" (same
principle) which is set in the same lock section as the state
update, and retrieved similarly.

That way, there is never any discrepancy between the dequeued
state and the observed value of it. We keep the ability to have
the latest reconfig operation take precedence, but we guarantee
that once "dequeued" the argument (new_fsg) will not be clobbered
by any new event.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: composite: Clear "suspended" on reset/disconnect

[ Upstream commit 602fda17c7356bb7ae98467d93549057481d11dd ]

In some cases, one can get out of suspend with a reset or
a disconnect followed by a reconnect. Previously we would
leave a stale suspended flag set.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/dma: Handle SG length overflow better

[ Upstream commit ab2cbeb0ed301a9f0460078e91b09f39958212ef ]

Since scatterlist dimensions are all unsigned ints, in the relatively
rare cases where a device's max_segment_size is set to UINT_MAX, then
the "cur_len + s_length <= max_len" check in __finalise_sg() will always
return true. As a result, the corner case of such a device mapping an
excessively large scatterlist which is mergeable to or beyond a total
length of 4GB can lead to overflow and a bogus truncated dma_length in
the resulting segment.

As we already assume that any single segment must be no longer than
max_len to begin with, this can easily be addressed by reshuffling the
comparison.

Fixes: 809eac54cdd6 ("iommu/dma: Implement scatterlist segment merging")
Reported-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

auxdisplay: panel: need to delete scan_timer when misc_register fails in panel_attach

[ Upstream commit b33d567560c1aadf3033290d74d4fd67af47aa61 ]

In panel_attach, if misc_register fails, we need to delete scan_timer,
which was setup in keypad_init->init_scan_timer.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ste_dma40: fix unneeded variable warning

[ Upstream commit 5d6fb560729a5d5554e23db8d00eb57cd0021083 ]

clang-9 points out that there are two variables that depending on the
configuration may only be used in an ARRAY_SIZE() expression but not
referenced:

drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static u32 d40_backup_regs[] = {
           ^
drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static u32 d40_backup_regs_chan[] = {

Mark these __maybe_unused to shut up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190712091357.744515-1-arnd@arndb.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.141

Revert "perf test 6: Fix missing kvm module load for s390"

This reverts commit 0e8529143a212a2f93fd5dfa63f83275f7c44655.

Which was upstream commit 53fe307dfd309e425b171f6272d64296a54f4dff.

Ben Hutchings reports that this commit depends on new code added in
v4.18, and so is irrelevant on older kernels, and breaks the build.

Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Allow flush_(inval_)dcache_range to work across ranges >4GB

The upstream commit:
22e9c88d486a ("powerpc/64: reuse PPC32 static inline flush_dcache_range()")
has a similar effect, but since it is a rewrite of the assembler to C, is
too invasive for stable. This patch is a minimal fix to address the issue in
assembler.

This patch applies cleanly to v5.2, v4.19 & v4.14.

When calling flush_(inval_)dcache_range with a size >4GB, we were masking
off the upper 32 bits, so we would incorrectly flush a range smaller
than intended.

This patch replaces the 32 bit shifts with 64 bit ones, so that
the full size is accounted for.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: fix potential NULL dereference in dmz_do_reclaim()

[ Upstream commit e0702d90b79d430b0ccc276ead4f88440bb51352 ]

This function is supposed to return error pointers so it matches the
dmz_get_rnd_zone_for_reclaim() function.  The current code could lead to
a NULL dereference in dmz_do_reclaim()

Fixes: b234c6d7a703 ("dm zoned: improve error handling in reclaim")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix missing ILOCK unlock when xfs_setattr_nonsize fails due to EDQUOT

commit 1fb254aa983bf190cfd685d40c64a480a9bafaee upstream.

Benjamin Moody reported to Debian that XFS partially wedges when a chgrp
fails on account of being out of disk quota.  I ran his reproducer
script:

# adduser dummy
# adduser dummy plugdev

# dd if=/dev/zero bs=1M count=100 of=test.img
# mkfs.xfs test.img
# mount -t xfs -o gquota test.img /mnt
# mkdir -p /mnt/dummy
# chown -c dummy /mnt/dummy
# xfs_quota -xc 'limit -g bsoft=100k bhard=100k plugdev' /mnt

(and then as user dummy)

$ dd if=/dev/urandom bs=1M count=50 of=/mnt/dummy/foo
$ chgrp plugdev /mnt/dummy/foo

and saw:

================================================
WARNING: lock held when returning to user space!
5.3.0-rc5 #rc5 Tainted: G        W
------------------------------------------------
chgrp/47006 is leaving the kernel with locks still held!
1 lock held by chgrp/47006:
 #0: 000000006664ea2d (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0xd2/0x290 [xfs]

...which is clearly caused by xfs_setattr_nonsize failing to unlock the
ILOCK after the xfs_qm_vop_chown_reserve call fails.  Add the missing
unlock.

Reported-by: benjamin.moody@gmail.com
Fixes: 253f4911f297 ("xfs: better xfs_trans_alloc interface")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/zsmalloc.c: fix race condition in zs_destroy_pool

commit 701d678599d0c1623aaf4139c03eea260a75b027 upstream.

In zs_destroy_pool() we call flush_work(&pool->free_work).  However, we
have no guarantee that migration isn't happening in the background at
that time.

Since migration can't directly free pages, it relies on free_work being
scheduled to free the pages.  But there's nothing preventing an
in-progress migrate from queuing the work *after*
zs_unregister_migration() has called flush_work().  Which would mean
pages still pointing at the inode when we free it.

Since we know at destroy time all objects should be free, no new
migrations can come in (since zs_page_isolate() fails for fully-free
zspages).  This means it is sufficient to track a "# isolated zspages"
count by class, and have the destroy logic ensure all such pages have
drained before proceeding.  Keeping that state under the class spinlock
keeps the logic straightforward.

In this case a memory leak could lead to an eventual crash if compaction
hits the leaked page.  This crash would only occur if people are
changing their zswap backend at runtime (which eventually starts
destruction).

Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com
Fixes: 48b4800a1c6a ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely

commit 1a87aa03597efa9641e92875b883c94c7f872ccb upstream.

In zs_page_migrate() we call putback_zspage() after we have finished
migrating all pages in this zspage.  However, the return value is
ignored.  If a zs_free() races in between zs_page_isolate() and
zs_page_migrate(), freeing the last object in the zspage,
putback_zspage() will leave the page in ZS_EMPTY for potentially an
unbounded amount of time.

To fix this, we need to do the same thing as zs_page_putback() does:
schedule free_work to occur.

To avoid duplicated code, move the sequence to a new
putback_zspage_deferred() function which both zs_page_migrate() and
zs_page_putback() call.

Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com
Fixes: 48b4800a1c6a ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, page_owner: handle THP splits correctly

commit f7da677bc6e72033f0981b9d58b5c5d409fa641e upstream.

THP splitting path is missing the split_page_owner() call that
split_page() has.

As a result, split THP pages are wrongly reported in the page_owner file
as order-9 pages.  Furthermore when the former head page is freed, the
remaining former tail pages are not listed in the page_owner file at
all.  This patch fixes that by adding the split_page_owner() call into
__split_huge_page().

Link: http://lkml.kernel.org/r/20190820131828.22684-2-vbabka@suse.cz
Fixes: a9627bc5e34e ("mm/page_owner: introduce split_page_owner and replace manual handling")
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Properly pair kobject_del() with kobject_add()

commit d0ff14fdc987303aeeb7de6f1bd72c3749ae2a9b upstream.

If alloc_descs() fails before irq_sysfs_init() has run, free_desc() in the
cleanup path will call kobject_del() even though the kobject has not been
added with kobject_add().

Fix this by making the call to kobject_del() conditional on whether
irq_sysfs_init() has run.

This problem surfaced because commit aa30f47cf666 ("kobject: Add support
for default attribute groups to kobj_type") makes kobject_del() stricter
about pairing with kobject_add(). If the pairing is incorrrect, a WARNING
and backtrace occur in sysfs_remove_group() because there is no parent.

[ tglx: Add a comment to the code and make it work with CONFIG_SYSFS=n ]

Fixes: ecb3f394c5db ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1564703564-4116-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: properly handle backing device failure

commit 75d66ffb48efb30f2dd42f041ba8b39c5b2bd115 upstream.

dm-zoned is observed to lock up or livelock in case of hardware
failure or some misconfiguration of the backing zoned device.

This patch adds a new dm-zoned target function that checks the status of
the backing device. If the request queue of the backing device is found
to be in dying state or the SCSI backing device enters offline state,
the health check code sets a dm-zoned target flag prompting all further
incoming I/O to be rejected. In order to detect backing device failures
timely, this new function is called in the request mapping path, at the
beginning of every reclaim run and before performing any metadata I/O.

The proper way out of this situation is to do

dmsetup remove <dm-zoned target>

and recreate the target when the problem with the backing device
is resolved.

Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: improve error handling in i/o map code

commit d7428c50118e739e672656c28d2b26b09375d4e0 upstream.

Some errors are ignored in the I/O path during queueing chunks
for processing by chunk works. Since at least these errors are
transient in nature, it should be possible to retry the failed
incoming commands.

The fix -

Errors that can happen while queueing chunks are carried upwards
to the main mapping function and it now returns DM_MAPIO_REQUEUE
for any incoming requests that can not be properly queued.

Error logging/debug messages are added where needed.

Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: improve error handling in reclaim

commit b234c6d7a703661b5045c5bf569b7c99d2edbf88 upstream.

There are several places in reclaim code where errors are not
propagated to the main function, dmz_reclaim(). This function
is responsible for unlocking zones that might be still locked
at the end of any failed reclaim iterations. As the result,
some device zones may be left permanently locked for reclaim,
degrading target's capability to reclaim zones.

This patch fixes these issues as follows -

Make sure that dmz_reclaim_buf(), dmz_reclaim_seq_data() and
dmz_reclaim_rnd_data() return error codes to the caller.

dmz_reclaim() function is renamed to dmz_do_reclaim() to avoid
clashing with "struct dmz_reclaim" and is modified to return the
error to the caller.

dmz_get_zone_for_reclaim() now returns an error instead of NULL
pointer and reclaim code checks for that error.

Error logging/debug messages are added where necessary.

Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm table: fix invalid memory accesses with too high sector number

commit 1cfd5d3399e87167b7f9157ef99daa0e959f395d upstream.

If the sector number is too high, dm_table_find_target() should return a
pointer to a zeroed dm_target structure (the caller should test it with
dm_target_is_valid).

However, for some table sizes, the code in dm_table_find_target() that
performs btree lookup will access out of bound memory structures.

Fix this bug by testing the sector number at the beginning of
dm_table_find_target(). Also, add an "inline" keyword to the function
dm_table_get_size() because this is a hot path.

Fixes: 512875bd9661 ("dm: table detect io beyond device")
Cc: stable@vger.kernel.org
Reported-by: Zhang Tao <kontais@zoho.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm space map metadata: fix missing store of apply_bops() return value

commit ae148243d3f0816b37477106c05a2ec7d5f32614 upstream.

In commit 6096d91af0b6 ("dm space map metadata: fix occasional leak
of a metadata block on resize"), we refactor the commit logic to a new
function 'apply_bops'.  But when that logic was replaced in out() the
return value was not stored.  This may lead out() returning a wrong
value to the caller.

Fixes: 6096d91af0b6 ("dm space map metadata: fix occasional leak of a metadata block on resize")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm btree: fix order of block initialization in btree_split_beneath

commit e4f9d6013820d1eba1432d51dd1c5795759aa77f upstream.

When btree_split_beneath() splits a node to two new children, it will
allocate two blocks: left and right.  If right block's allocation
failed, the left block will be unlocked and marked dirty.  If this
happened, the left block'ss content is zero, because it wasn't
initialized with the btree struct before the attempot to allocate the
right block.  Upon return, when flushing the left block to disk, the
validator will fail when check this block.  Then a BUG_ON is raised.

Fix this by completely initializing the left block before allocating and
initializing the right block.

Fixes: 4dcb8b57df359 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm kcopyd: always complete failed jobs

commit d1fef41465f0e8cae0693fb184caa6bfafb6cd16 upstream.

This patch fixes a problem in dm-kcopyd that may leave jobs in
complete queue indefinitely in the event of backing storage failure.

This behavior has been observed while running 100% write file fio
workload against an XFS volume created on top of a dm-zoned target
device. If the underlying storage of dm-zoned goes to offline state
under I/O, kcopyd sometimes never issues the end copy callback and
dm-zoned reclaim work hangs indefinitely waiting for that completion.

This behavior was traced down to the error handling code in
process_jobs() function that places the failed job to complete_jobs
queue, but doesn't wake up the job handler. In case of backing device
failure, all outstanding jobs may end up going to complete_jobs queue
via this code path and then stay there forever because there are no
more successful I/O jobs to wake up the job handler.

This patch adds a wake() call to always wake up kcopyd job wait queue
for all I/O jobs that fail before dm_io() gets called for that job.

The patch also sets the write error status in all sub jobs that are
failed because their master job has failed.

Fixes: b73c67c2cbb00 ("dm kcopyd: add sequential write feature")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>