arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB

[ Upstream commit eb337cdfcd5dd3b10522c2f34140a73a4c285c30 ]

SSBS provides a relatively cheap mitigation for SSB, but it is still a
mitigation and its presence does not indicate that the CPU is unaffected
by the vulnerability.

Tweak the mitigation logic so that we report the correct string in sysfs.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add sysfs vulnerability show for speculative store bypass

[ Upstream commit 526e065dbca6df0b5a130b84b836b8b3c9f54e21 ]

Return status based on ssbd_state and __ssb_safe. If the
mitigation is disabled, or the firmware isn't responding then
return the expected machine state based on a whitelist of known
good cores.

Given a heterogeneous machine, the overall machine vulnerability
defaults to safe but is reset to unsafe when we miss the whitelist
and the firmware doesn't explicitly tell us the core is safe.
In order to make that work we delay transitioning to vulnerable
until we know the firmware isn't responding to avoid a case
where we miss the whitelist, but the firmware goes ahead and
reports the core is not vulnerable. If all the cores in the
machine have SSBS, then __ssb_safe will remain true.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add sysfs vulnerability show for spectre-v2

[ Upstream commit d2532e27b5638bb2e2dd52b80b7ea2ec65135377 ]

Track whether all the cores in the machine are vulnerable to Spectre-v2,
and whether all the vulnerable cores have been mitigated. We then expose
this information to userspace via sysfs.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Always enable spectre-v2 vulnerability detection

[ Upstream commit 8c1e3d2bb44cbb998cb28ff9a18f105fee7f1eb3 ]

Ensure we are always able to detect whether or not the CPU is affected
by Spectre-v2, so that we can later advertise this to userspace.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Advertise mitigation of Spectre-v2, or lack thereof

[ Upstream commit 73f38166095947f3b86b02fbed6bd592223a7ac8 ]

We currently have a list of CPUs affected by Spectre-v2, for which
we check that the firmware implements ARCH_WORKAROUND_1. It turns
out that not all firmwares do implement the required mitigation,
and that we fail to let the user know about it.

Instead, let's slightly revamp our checks, and rely on a whitelist
of cores that are known to be non-vulnerable, and let the user know
the status of the mitigation in the kernel log.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Provide a command line to disable spectre_v2 mitigation

[ Upstream commit e5ce5e7267ddcbe13ab9ead2542524e1b7993e5a ]

There are various reasons, such as benchmarking, to disable spectrev2
mitigation on a machine. Provide a command-line option to do so.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Always enable ssb vulnerability detection

[ Upstream commit d42281b6e49510f078ace15a8ea10f71e6262581 ]

Ensure we are always able to detect whether or not the CPU is affected
by SSB, so that we can later advertise this to userspace.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[will: Use IS_ENABLED instead of #ifdef]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: enable generic CPU vulnerabilites support

[ Upstream commit 61ae1321f06c4489c724c803e9b8363dea576da3 ]

Enable CPU vulnerabilty show functions for spectre_v1, spectre_v2,
meltdown and store-bypass.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add sysfs vulnerability show for meltdown

[ Upstream commit 1b3ccf4be0e7be8c4bd8522066b6cbc92591e912 ]

We implement page table isolation as a mitigation for meltdown.
Report this to userspace via sysfs.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add sysfs vulnerability show for spectre-v1

[ Upstream commit 3891ebccace188af075ce143d8b072b65e90f695 ]

spectre-v1 has been mitigated and the mitigation is always active.
Report this to userspace via sysfs

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fix SSBS sanitization

[ Upstream commit f54dada8274643e3ff4436df0ea124aeedc43cae ]

In valid_user_regs() we treat SSBS as a RES0 bit, and consequently it is
unexpectedly cleared when we restore a sigframe or fiddle with GPRs via
ptrace.

This patch fixes valid_user_regs() to account for this, updating the
function to refer to the latest ARM ARM (ARM DDI 0487D.a). For AArch32
tasks, SSBS appears in bit 23 of SPSR_EL1, matching its position in the
AArch32-native PSR format, and we don't need to translate it as we have
to for DIT.

There are no other bit assignments that we need to account for today.
As the recent documentation describes the DIT bit, we can drop our
comment regarding DIT.

While removing SSBS from the RES0 masks, existing inconsistent
whitespace is corrected.

Fixes: d71be2b6c0e19180 ("arm64: cpufeature: Detect SSBS and advertise to userspace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Set SCTLR_EL2.DSSBS if SSBD is forcefully disabled and !vhe

[ Upstream commit 7c36447ae5a090729e7b129f24705bb231a07e0b ]

When running without VHE, it is necessary to set SCTLR_EL2.DSSBS if SSBD
has been forcefully disabled on the kernel command-line.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3

[ Upstream commit 8f04e8e6e29c93421a95b61cad62e3918425eac7 ]

On CPUs with support for PSTATE.SSBS, the kernel can toggle the SSBD
state without needing to call into firmware.

This patch hooks into the existing SSBD infrastructure so that SSBS is
used on CPUs that support it, but it's all made horribly complicated by
the very real possibility of big/little systems that don't uniformly
provide the new capability.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ardb: add #include of asm/compat.h]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: Detect SSBS and advertise to userspace

[ Upstream commit d71be2b6c0e19180b5f80a6d42039cc074a693a2 ]

Armv8.5 introduces a new PSTATE bit known as Speculative Store Bypass
Safe (SSBS) which can be used as a mitigation against Spectre variant 4.

Additionally, a CPU may provide instructions to manipulate PSTATE.SSBS
directly, so that userspace can toggle the SSBS control without trapping
to the kernel.

This patch probes for the existence of SSBS and advertise the new instructions
to userspace if they exist.

Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Get rid of __smccc_workaround_1_hvc_*

[ Upstream commit 22765f30dbaf1118c6ff0fcb8b99c9f2b4d396d5 ]

The very existence of __smccc_workaround_1_hvc_* is a thinko, as
KVM will never use a HVC call to perform the branch prediction
invalidation. Even as a nested hypervisor, it would use an SMC
instruction.

Let's get rid of it.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: don't zero DIT on signal return

[ Upstream commit 1265132127b63502d34e0f58c8bdef3a4dc927c2 ]

Currently valid_user_regs() treats SPSR_ELx.DIT as a RES0 bit, causing
it to be zeroed upon exception return, rather than preserved. Thus, code
relying on DIT will not function as expected, and may expose an
unexpected timing sidechannel.

Let's remove DIT from the set of RES0 bits, such that it is preserved.
At the same time, the related comment is updated to better describe the
situation, and to take into account the most recent documentation of
SPSR_ELx, in ARM DDI 0487C.a.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 7206dc93a58fb764 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening

[ Upstream commit 4bc352ffb39e4eec253e70f8c076f2f48a6c1926 ]

The function SMCCC_ARCH_WORKAROUND_1 was introduced as part of SMC
V1.1 Calling Convention to mitigate CVE-2017-5715. This patch uses
the standard call SMCCC_ARCH_WORKAROUND_1 for Falkor chips instead
of Silicon provider service ID 0xC2001700.

Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
[maz: reworked errata framework integration]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Add support for checks based on a list of MIDRs

[ Upstream commit be5b299830c63ed76e0357473c4218c85fb388b3 ]

Add helpers for detecting an errata on list of midr ranges
of affected CPUs, with the same work around.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[ardb: add Cortex-A35 to kpti_safe_list[] as well]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35

[ Upstream commit 6e616864f21160d8d503523b60a53a29cecc6f24 ]

Update the MIDR encodings for the Cortex-A55 and Cortex-A35

Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add helpers for checking CPU MIDR against a range

[ Upstream commit 1df310505d6d544802016f6bae49aab836ae8510 ]

Add helpers for checking if the given CPU midr falls in a range
of variants/revisions for a given model.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Clean up midr range helpers

[ Upstream commit 5e7951ce19abf4113645ae789c033917356ee96f ]

We are about to introduce generic MIDR range helpers. Clean
up the existing helpers in erratum handling, preparing them
to use generic version.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Change scope of VHE to Boot CPU feature

[ Upstream commit 830dcc9f9a7cd26a812522a26efaacf7df6fc365 ]

We expect all CPUs to be running at the same EL inside the kernel
with or without VHE enabled and we have strict checks to ensure
that any mismatch triggers a kernel panic. If VHE is enabled,
we use the feature based on the boot CPU and all other CPUs
should follow. This makes it a perfect candidate for a capability
based on the boot CPU,  which should be matched by all the CPUs
(both when is ON and OFF). This saves us some not-so-pretty
hooks and special code, just for verifying the conflict.

The patch also makes the VHE capability entry depend on
CONFIG_ARM64_VHE.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Add support for features enabled early

[ Upstream commit fd9d63da17daf09c0099e3d5e3f0c0f03d9b251b ]

The kernel detects and uses some of the features based on the boot
CPU and expects that all the following CPUs conform to it. e.g,
with VHE and the boot CPU running at EL2, the kernel decides to
keep the kernel running at EL2. If another CPU is brought up without
this capability, we use custom hooks (via check_early_cpu_features())
to handle it. To handle such capabilities add support for detecting
and enabling capabilities based on the boot CPU.

A bit is added to indicate if the capability should be detected
early on the boot CPU. The infrastructure then ensures that such
capabilities are probed and "enabled" early on in the boot CPU
and, enabled on the subsequent CPUs.

Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Restrict KPTI detection to boot-time CPUs

[ Upstream commit d3aec8a28be3b88bf75442e7c24fd9da8d69a6df ]

KPTI is treated as a system wide feature and is only detected if all
the CPUs in the sysetm needs the defense, unless it is forced via kernel
command line. This leaves a system with a mix of CPUs with and without
the defense vulnerable. Also, if a late CPU needs KPTI but KPTI was not
activated at boot time, the CPU is currently allowed to boot, which is a
potential security vulnerability.
This patch ensures that the KPTI is turned on if at least one CPU detects
the capability (i.e, change scope to SCOPE_LOCAL_CPU). Also rejetcs a late
CPU, if it requires the defense, when the system hasn't enabled it,

Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Introduce weak features based on local CPU

[ Upstream commit 5c137714dd8cae464dbd5f028c07af149e6d09fc ]

Now that we have the flexibility of defining system features based
on individual CPUs, introduce CPU feature type that can be detected
on a local SCOPE and ignores the conflict on late CPUs. This is
applicable for ARM64_HAS_NO_HW_PREFETCH, where it is fine for
the system to have CPUs without hardware prefetch turning up
later. We only suffer a performance penalty, nothing fatal.

Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Group handling of features and errata workarounds

[ Upstream commit ed478b3f9e4ac97fdbe07007fb2662415de8fe25 ]

Now that the features and errata workarounds have the same
rules and flow, group the handling of the tables.

Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Allow features based on local CPU scope

[ Upstream commit fbd890b9b8497bab04c1d338bd97579a7bc53fab ]

So far we have treated the feature capabilities as system wide
and this wouldn't help with features that could be detected locally
on one or more CPUs (e.g, KPTI, Software prefetch). This patch
splits the feature detection to two phases :

 1) Local CPU features are checked on all boot time active CPUs.
 2) System wide features are checked only once after all CPUs are
    active.

Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Split the processing of errata work arounds

[ Upstream commit d69fe9a7e7214d49fe157ec20889892388d0fe23 ]

Right now we run through the errata workarounds check on all boot
active CPUs, with SCOPE_ALL. This wouldn't help for detecting erratum
workarounds with a SYSTEM_SCOPE. There are none yet, but we plan to
introduce some: let us clean this up so that such workarounds can be
detected and enabled correctly.

So, we run the checks with SCOPE_LOCAL_CPU on all CPUs and SCOPE_SYSTEM
checks are run only once after all the boot time CPUs are active.

Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Prepare for grouping features and errata work arounds

[ Upstream commit 600b9c919c2f4d07a7bf67864086aa3432224674 ]

We are about to group the handling of all capabilities (features
and errata workarounds). This patch open codes the wrapper routines
to make it easier to merge the handling.

Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Filter the entries based on a given mask

[ Upstream commit cce360b54ce6ca1bcf4b0a870ec076d83606775e ]

While processing the list of capabilities, it is useful to
filter out some of the entries based on the given mask for the
scope of the capabilities to allow better control. This can be
used later for handling LOCAL vs SYSTEM wide capabilities and more.
All capabilities should have their scope set to either LOCAL_CPU or
SYSTEM. No functional/flow change.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Unify the verification

[ Upstream commit eaac4d83daa50fc1b9b7850346e9a62adfd4647e ]

Now that each capability describes how to treat the conflicts
of CPU cap state vs System wide cap state, we can unify the
verification logic to a single place.

Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Add flags to handle the conflicts on late CPU

[ Upstream commit 5b4747c5dce7a873e1e7fe1608835825f714267a ]

When a CPU is brought up, it is checked against the caps that are
known to be enabled on the system (via verify_local_cpu_capabilities()).
Based on the state of the capability on the CPU vs. that of System we
could have the following combinations of conflict.

x-----------------------------x
| Type  | System   | Late CPU |
|-----------------------------|
|  a    |   y      |    n     |
|-----------------------------|
|  b    |   n      |    y     |
x-----------------------------x

Case (a) is not permitted for caps which are system features, which the
system expects all the CPUs to have (e.g VHE). While (a) is ignored for
all errata work arounds. However, there could be exceptions to the plain
filtering approach. e.g, KPTI is an optional feature for a late CPU as
long as the system already enables it.

Case (b) is not permitted for errata work arounds that cannot be activated
after the kernel has finished booting.And we ignore (b) for features. Here,
yet again, KPTI is an exception, where if a late CPU needs KPTI we are too
late to enable it (because we change the allocation of ASIDs etc).

Add two different flags to indicate how the conflict should be handled.

 ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU - CPUs may have the capability
 ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU - CPUs may not have the cappability.

Now that we have the flags to describe the behavior of the errata and
the features, as we treat them, define types for ERRATUM and FEATURE.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Prepare for fine grained capabilities

[ Upstream commit 143ba05d867af34827faf99e0eed4de27106c7cb ]

We use arm64_cpu_capabilities to represent CPU ELF HWCAPs exposed
to the userspace and the CPU hwcaps used by the kernel, which
include cpu features and CPU errata work arounds. Capabilities
have some properties that decide how they should be treated :

 1) Detection, i.e scope : A cap could be "detected" either :
    - if it is present on at least one CPU (SCOPE_LOCAL_CPU)
Or
    - if it is present on all the CPUs (SCOPE_SYSTEM)

 2) When is it enabled ? - A cap is treated as "enabled" when the
  system takes some action based on whether the capability is detected or
  not. e.g, setting some control register, patching the kernel code.
  Right now, we treat all caps are enabled at boot-time, after all
  the CPUs are brought up by the kernel. But there are certain caps,
  which are enabled early during the boot (e.g, VHE, GIC_CPUIF for NMI)
  and kernel starts using them, even before the secondary CPUs are brought
  up. We would need a way to describe this for each capability.

 3) Conflict on a late CPU - When a CPU is brought up, it is checked
  against the caps that are known to be enabled on the system (via
  verify_local_cpu_capabilities()). Based on the state of the capability
  on the CPU vs. that of System we could have the following combinations
  of conflict.

x-----------------------------x
| Type | System   | Late CPU |
------------------------------|
|  a    |   y      |    n     |
------------------------------|
|  b    |   n      |    y     |
x-----------------------------x

  Case (a) is not permitted for caps which are system features, which the
  system expects all the CPUs to have (e.g VHE). While (a) is ignored for
  all errata work arounds. However, there could be exceptions to the plain
  filtering approach. e.g, KPTI is an optional feature for a late CPU as
  long as the system already enables it.

  Case (b) is not permitted for errata work arounds which requires some
  work around, which cannot be delayed. And we ignore (b) for features.
  Here, yet again, KPTI is an exception, where if a late CPU needs KPTI we
  are too late to enable it (because we change the allocation of ASIDs
  etc).

So this calls for a lot more fine grained behavior for each capability.
And if we define all the attributes to control their behavior properly,
we may be able to use a single table for the CPU hwcaps (which cover
errata and features, not the ELF HWCAPs). This is a prepartory step
to get there. More bits would be added for the properties listed above.

We are going to use a bit-mask to encode all the properties of a
capabilities. This patch encodes the "SCOPE" of the capability.

As such there is no change in how the capabilities are treated.

Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Move errata processing code

[ Upstream commit 1e89baed5d50d2b8d9fd420830902570270703f1 ]

We have errata work around processing code in cpu_errata.c,
which calls back into helpers defined in cpufeature.c. Now
that we are going to make the handling of capabilities
generic, by adding the information to each capability,
move the errata work around specific processing code.
No functional changes.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Move errata work around check on boot CPU

[ Upstream commit 5e91107b06811f0ca147cebbedce53626c9c4443 ]

We trigger CPU errata work around check on the boot CPU from
smp_prepare_boot_cpu() to make sure that we run the checks only
after the CPU feature infrastructure is initialised. While this
is correct, we can also do this from init_cpu_features() which
initilises the infrastructure, and is called only on the
Boot CPU. This helps to consolidate the CPU capability handling
to cpufeature.c. No functional changes.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: capabilities: Update prototype for enable call back

[ Upstream commit c0cda3b8ee6b4b6851b2fd8b6db91fd7b0e2524a ]

We issue the enable() call back for all CPU hwcaps capabilities
available on the system, on all the CPUs. So far we have ignored
the argument passed to the call back, which had a prototype to
accept a "void *" for use with on_each_cpu() and later with
stop_machine(). However, with commit 0a0d111d40fd1
("arm64: cpufeature: Pass capability structure to ->enable callback"),
there are some users of the argument who wants the matching capability
struct pointer where there are multiple matching criteria for a single
capability. Clean up the declaration of the call back to make it clear.

 1) Renamed to cpu_enable(), to imply taking necessary actions on the
    called CPU for the entry.
 2) Pass const pointer to the capability, to allow the call back to
    check the entry. (e.,g to check if any action is needed on the CPU)
 3) We don't care about the result of the call back, turning this to
    a void.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: James Morse <james.morse@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Dave Martin <dave.martin@arm.com>
[suzuki: convert more users, rename call back and drop results]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Introduce sysreg_clear_set()

[ Upstream commit 6ebdf4db8fa564a150f46d32178af0873eb5abbb ]

Currently we have a couple of helpers to manipulate bits in particular
sysregs:

 * config_sctlr_el1(u32 clear, u32 set)

 * change_cpacr(u64 val, u64 mask)

The parameters of these differ in naming convention, order, and size,
which is unfortunate. They also differ slightly in behaviour, as
change_cpacr() skips the sysreg write if the bits are unchanged, which
is a useful optimization when sysreg writes are expensive.

Before we gain yet another sysreg manipulation function, let's
unify these with a common helper, providing a consistent order for
clear/set operands, and the write skipping behaviour from
change_cpacr(). Code will be migrated to the new helper in subsequent
patches.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add PSR_AA32_* definitions

[ Upstream commit 25086263425641c74123f9387426c23072b299ea ]

The AArch32 CPSR/SPSR format is *almost* identical to the AArch64
SPSR_ELx format for exceptions taken from AArch32, but the two have
diverged with the addition of DIT, and we need to treat the two as
logically distinct.

This patch adds new definitions for the SPSR_ELx format for exceptions
taken from AArch32, with a consistent PSR_AA32_ prefix. The existing
COMPAT_PSR_ definitions will be used for the PSR format as seen from
AArch32.

Definitions of DIT are provided for both, and inline functions are
provided to map between the two formats. Note that for SPSR_ELx, the
(RES0) J bit has been re-allocated as the DIT bit.

Once users of the COMPAT_PSR definitions have been migrated over to the
PSR_AA32 definitions, the (majority of) the former will be removed, so
no efforts is made to avoid duplication until then.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: move SCTLR_EL{1,2} assertions to <asm/sysreg.h>

[ Upstream commit 1c312e84c2d71da4101754fa6118f703f7473e01 ]

Currently we assert that the SCTLR_EL{1,2}_{SET,CLEAR} bits are
self-consistent with an assertion in config_sctlr_el1(). This is a bit
unusual, since config_sctlr_el1() doesn't make use of these definitions,
and is far away from the definitions themselves.

We can use the CPP #error directive to have equivalent assertions in
<asm/sysreg.h>, next to the definitions of the set/clear bits, which is
a bit clearer and simpler.

At the same time, lets fill in the upper 32 bits for both registers in
their respective RES0 definitions. This could be a little nicer with
GENMASK_ULL(63, 32), but this currently lives in <linux/bitops.h>, which
cannot safely be included from assembly, as <asm/sysreg.h> can.

Note the when the preprocessor evaluates an expression for an #if
directive, all signed or unsigned values are treated as intmax_t or
uintmax_t respectively. To avoid ambiguity, we define explicitly define
the mask of all 64 bits.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Expose Arm v8.4 features

[ Upstream commit 7206dc93a58fb76421c4411eefa3c003337bcb2d ]

Expose the new features introduced by Arm v8.4 extensions to
Arm v8-A profile.

These include :

 1) Data indpendent timing of instructions. (DIT, exposed as HWCAP_DIT)
 2) Unaligned atomic instructions and Single-copy atomicity of loads
    and stores. (AT, expose as HWCAP_USCAT)
 3) LDAPR and STLR instructions with immediate offsets (extension to
    LRCPC, exposed as HWCAP_ILRCPC)
 4) Flag manipulation instructions (TS, exposed as HWCAP_FLAGM).

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[ardb: fix up context for missing SVE]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Documentation: cpu-feature-registers: Remove RES0 fields

[ Upstream commit 847ecd3fa311cde0f10a1b66c572abb136742b1d ]

Remove the invisible RES0 field entries from the table, listing
fields in CPU ID feature registers, as :
 1) We are only interested in the user visible fields.
 2) The field description may not be up-to-date, as the
    field could be assigned a new meaning.
 3) We already explain the rules of the fields which are not
    visible.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[ardb: fix up for missing SVE in context]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: v8.4: Support for new floating point multiplication instructions

[ Upstream commit 3b3b681097fae73b7f5dcdd42db6cfdf32943d4c ]

ARM v8.4 extensions add new neon instructions for performing a
multiplication of each FP16 element of one vector with the corresponding
FP16 element of a second vector, and to add or subtract this without an
intermediate rounding to the corresponding FP32 element in a third vector.

This patch detects this feature and let the userspace know about it via a
HWCAP bit and MRS emulation.

Cc: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ardb: fix up for missing SVE in context]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Fix the feature type for ID register fields

[ Upstream commit 5bdecb7971572a1aef828df507558e7a4dfe25ec ]

Now that the ARM ARM clearly specifies the rules for inferring
the values of the ID register fields, fix the types of the
feature bits we have in the kernel.

As per ARM ARM DDI0487B.b, section D10.1.4 "Principles of the
ID scheme for fields in ID registers" lists the registers to
which the scheme applies along with the exceptions.

This patch changes the relevant feature bits from FTR_EXACT
to FTR_LOWER_SAFE to select the safer value. This will enable
an older kernel running on a new CPU detect the safer option
rather than completely disabling the feature.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Expose support for optional ARMv8-A features

[ Upstream commit f5e035f8694c3bdddc66ea46ecda965ee6853718 ]

ARMv8-A adds a few optional features for ARMv8.2 and ARMv8.3.
Expose them to the userspace via HWCAPs and mrs emulation.

SHA2-512  - Instruction support for SHA512 Hash algorithm (e.g SHA512H,
    SHA512H2, SHA512U0, SHA512SU1)
SHA3    - SHA3 crypto instructions (EOR3, RAX1, XAR, BCAX).
SM3   - Instruction support for Chinese cryptography algorithm SM3
SM4    - Instruction support for Chinese cryptography algorithm SM4
DP   - Dot Product instructions (UDOT, SDOT).

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: sysreg: Move to use definitions for all the SCTLR bits

[ Upstream commit 7a00d68ebe5f07cb1db17e7fedfd031f0d87e8bb ]

__cpu_setup() configures SCTLR_EL1 using some hard coded hex masks,
and el2_setup() duplicates some this when setting RES1 bits.

Lets make this the same as KVM's hyp_init, which uses named bits.

First, we add definitions for all the SCTLR_EL{1,2} bits, the RES{1,0}
bits, and those we want to set or clear.

Add a build_bug checks to ensures all bits are either set or clear.
This means we don't need to preserve endian-ness configuration
generated elsewhere.

Finally, move the head.S and proc.S users of these hard-coded masks
over to the macro versions.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ldusb: fix read info leaks

commit 7a6f22d7479b7a0b68eadd308a997dd64dda7dae upstream.

Fix broken read implementation, which could be used to trigger slab info
leaks.

The driver failed to check if the custom ring buffer was still empty
when waking up after having waited for more data. This would happen on
every interrupt-in completion, even if no data had been added to the
ring buffer (e.g. on disconnect events).

Due to missing sanity checks and uninitialised (kmalloced) ring-buffer
entries, this meant that huge slab info leaks could easily be triggered.

Note that the empty-buffer check after wakeup is enough to fix the info
leak on disconnect, but let's clear the buffer on allocation and add a
sanity check to read() to prevent further leaks.

Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usblp: fix use-after-free on disconnect

commit 7a759197974894213621aa65f0571b51904733d6 upstream.

A recent commit addressing a runtime PM use-count regression, introduced
a use-after-free by not making sure we held a reference to the struct
usb_interface for the lifetime of the driver data.

Fixes: 9a31535859bf ("USB: usblp: fix runtime PM after driver unbind")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191015175522.18490-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ldusb: fix memleak on disconnect

commit b14a39048c1156cfee76228bf449852da2f14df8 upstream.

If disconnect() races with release() after a process has been
interrupted, release() could end up returning early and the driver would
fail to free its driver data.

Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191010125835.27031-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ti_usb_3410_5052: fix port-close races

commit 6f1d1dc8d540a9aa6e39b9cb86d3a67bbc1c8d8d upstream.

Fix races between closing a port and opening or closing another port on
the same device which could lead to a failure to start or stop the
shared interrupt URB. The latter could potentially cause a
use-after-free or worse in the completion handler on driver unbind.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: udc: lpc32xx: fix bad bit shift operation

commit b987b66ac3a2bc2f7b03a0ba48a07dc553100c07 upstream.

It seems that the right variable to use in this case is *i*, instead of
*n*, otherwise there is an undefined behavior when right shifiting by more
than 31 bits when multiplying n by 8; notice that *n* can take values
equal or greater than 4 (4, 8, 16, ...).

Also, notice that under the current conditions (bl = 3), we are skiping
the handling of bytes 3, 7, 31... So, fix this by updating this logic
and limit *bl* up to 4 instead of up to 3.

This fix is based on function udc_stuff_fifo().

Addresses-Coverity-ID: 1454834 ("Bad bit shift operation")
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20191014191830.GA10721@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add support for ALC711

commit 83629532ce45ef9df1f297b419b9ea112045685d upstream.

Support new codec ALC711.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: legousbtower: fix memleak on disconnect

commit b6c03e5f7b463efcafd1ce141bd5a8fc4e583ae2 upstream.

If disconnect() races with release() after a process has been
interrupted, release() could end up returning early and the driver would
fail to free its driver data.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191010125835.27031-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memfd: Fix locking when tagging pins

The RCU lock is insufficient to protect the radix tree iteration as
a deletion from the tree can occur before we take the spinlock to
tag the entry.  In 4.19, this has manifested as a bug with the following
trace:

kernel BUG at lib/radix-tree.c:1429!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 7 PID: 6935 Comm: syz-executor.2 Not tainted 4.19.36 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:radix_tree_tag_set+0x200/0x2f0 lib/radix-tree.c:1429
Code: 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 44 24 10 e8 a3 29 7e fe 48 8b 44 24 10 48 0f ab 03 e9 d2 fe ff ff e8 90 29 7e fe <0f> 0b 48 c7 c7 e0 5a 87 84 e8 f0 e7 08 ff 4c 89 ef e8 4a ff ac fe
RSP: 0018:ffff88837b13fb60 EFLAGS: 00010016
RAX: 0000000000040000 RBX: ffff8883c5515d58 RCX: ffffffff82cb2ef0
RDX: 0000000000000b72 RSI: ffffc90004cf2000 RDI: ffff8883c5515d98
RBP: ffff88837b13fb98 R08: ffffed106f627f7e R09: ffffed106f627f7e
R10: 0000000000000001 R11: ffffed106f627f7d R12: 0000000000000004
R13: ffffea000d7fea80 R14: 1ffff1106f627f6f R15: 0000000000000002
FS:  00007fa1b8df2700(0000) GS:ffff8883e2fc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa1b8df1db8 CR3: 000000037d4d2001 CR4: 0000000000160ee0
Call Trace:
 memfd_tag_pins mm/memfd.c:51 [inline]
 memfd_wait_for_pins+0x2c5/0x12d0 mm/memfd.c:81
 memfd_add_seals mm/memfd.c:215 [inline]
 memfd_fcntl+0x33d/0x4a0 mm/memfd.c:247
 do_fcntl+0x589/0xeb0 fs/fcntl.c:421
 __do_sys_fcntl fs/fcntl.c:463 [inline]
 __se_sys_fcntl fs/fcntl.c:448 [inline]
 __x64_sys_fcntl+0x12d/0x180 fs/fcntl.c:448
 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:293

The problem does not occur in mainline due to the XArray rewrite which
changed the locking to exclude modification of the tree during iteration.
At the time, nobody realised this was a bugfix.  Backport the locking
changes to stable.

Cc: stable@vger.kernel.org
Reported-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

loop: Add LOOP_SET_DIRECT_IO to compat ioctl

[ Upstream commit fdbe4eeeb1aac219b14f10c0ed31ae5d1123e9b8 ]

Enabling Direct I/O with loop devices helps reducing memory usage by
avoiding double caching.  32 bit applications running on 64 bits systems
are currently not able to request direct I/O because is missing from the
lo_compat_ioctl.

This patch fixes the compatibility issue mentioned above by exporting
LOOP_SET_DIRECT_IO as additional lo_compat_ioctl() entry.
The input argument for this ioctl is a single long converted to a 1-bit
boolean, so compatibility is preserved.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: avoid potential infinite loop in tc_ctl_action()

[ Upstream commit 39f13ea2f61b439ebe0060393e9c39925c9ee28c ]

tc_ctl_action() has the ability to loop forever if tcf_action_add()
returns -EAGAIN.

This special case has been done in case a module needed to be loaded,
but it turns out that tcf_add_notify() could also return -EAGAIN
if the socket sk_rcvbuf limit is hit.

We need to separate the two cases, and only loop for the module
loading case.

While we are at it, add a limit of 10 attempts since unbounded
loops are always scary.

syzbot repro was something like :

socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3
write(3, ..., 38) = 38
setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0
sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...)

NMI backtrace for cpu 0
CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101
 nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62
 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
 trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
 check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline]
 watchdog+0x9d0/0xef0 kernel/hung_task.c:289
 kthread+0x361/0x430 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline]
RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453
Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6
RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046
RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914
RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1
R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f
R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003
FS:  00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
 _raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159
 __wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122
 __wake_up+0xe/0x10 kernel/sched/wait.c:142
 netlink_unlock_table net/netlink/af_netlink.c:466 [inline]
 netlink_unlock_table net/netlink/af_netlink.c:463 [inline]
 netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514
 netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534
 rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714
 tcf_add_notify net/sched/act_api.c:1343 [inline]
 tcf_action_add+0x243/0x370 net/sched/act_api.c:1362
 tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440939

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: change sctp_prot .no_autobind with true

[ Upstream commit 63dfb7938b13fa2c2fbcb45f34d065769eb09414 ]

syzbot reported a memory leak:

  BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64):
  backtrace:

    [...] slab_alloc mm/slab.c:3319 [inline]
    [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483
    [...] sctp_bucket_create net/sctp/socket.c:8523 [inline]
    [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270
    [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402
    [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497
    [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022
    [...] sctp_setsockopt net/sctp/socket.c:4641 [inline]
    [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611
    [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147
    [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
    [...] __do_sys_setsockopt net/socket.c:2100 [inline]

It was caused by when sending msgs without binding a port, in the path:
inet_sendmsg() -> inet_send_prepare() -> inet_autobind() ->
.get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is
not. Later when binding another port by sctp_setsockopt_bindx(), a new
bucket will be created as bp->port is not set.

sctp's autobind is supposed to call sctp_autobind() where it does all
things including setting bp->port. Since sctp_autobind() is called in
sctp_sendmsg() if the sk is not yet bound, it should have skipped the
auto bind.

THis patch is to avoid calling inet_autobind() in inet_send_prepare()
by changing sctp_prot .no_autobind with true, also remove the unused
.get_port.

Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: disable/enable ptp_ref_clk in suspend/resume flow

[ Upstream commit e497c20e203680aba9ccf7bb475959595908ca7e ]

disable ptp_ref_clk in suspend flow, and enable it in resume flow.

Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: i82596: fix dma_alloc_attr for sni_82596

[ Upstream commit 61c1d33daf7b5146f44d4363b3322f8cda6a6c43 ]

Commit 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
switched dma allocation over to dma_alloc_attr, but didn't convert
the SNI part to request consistent DMA memory. This broke sni_82596
since driver doesn't do dma_cache_sync for performance reasons.
Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596.

Fixes: 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: Set phydev->dev_flags only for internal PHYs

[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ]

phydev->dev_flags is entirely dependent on the PHY device driver which
is going to be used, setting the internal GENET PHY revision in those
bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver
being used.

Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3

[ Upstream commit efb86fede98cdc70b674692ff617b1162f642c49 ]

The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and
became 6 for GENET v4 and above, account for that difference.

Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Return -ENETUNREACH if we can't create route but saddr is valid

[ Upstream commit 595e0651d0296bad2491a4a29a7a43eae6328b02 ]

...instead of -EINVAL. An issue was found with older kernel versions
while unplugging a NFS client with pending RPCs, and the wrong error
code here prevented it from recovering once link is back up with a
configured address.

Incidentally, this is not an issue anymore since commit 4f8943f80883
("SUNRPC: Replace direct task wakeups from softirq context"), included
in 5.2-rc7, had the effect of decoupling the forwarding of this error
by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin
Coddington.

To the best of my knowledge, this isn't currently causing any further
issue, but the error code doesn't look appropriate anyway, and we
might hit this in other paths as well.

In detail, as analysed by Gonzalo Siero, once the route is deleted
because the interface is down, and can't be resolved and we return
-EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(),
as the socket error seen by tcp_write_err(), called by
tcp_retransmit_timer().

In turn, tcp_write_err() indirectly calls xs_error_report(), which
wakes up the RPC pending tasks with a status of -EINVAL. This is then
seen by call_status() in the SUN RPC implementation, which aborts the
RPC call calling rpc_exit(), instead of handling this as a
potentially temporary condition, i.e. as a timeout.

Return -EINVAL only if the input parameters passed to
ip_route_output_key_hash_rcu() are actually invalid (this is the case
if the specified source address is multicast, limited broadcast or
all zeroes), but return -ENETUNREACH in all cases where, at the given
moment, the given source address doesn't allow resolving the route.

While at it, drop the initialisation of err to -ENETUNREACH, which
was added to __ip_route_output_key() back then by commit
0315e3827048 ("net: Fix behaviour of unreachable, blackhole and
prohibit routes"), but actually had no effect, as it was, and is,
overwritten by the fib_lookup() return code assignment, and anyway
ignored in all other branches, including the if (fl4->saddr) one:
I find this rather confusing, as it would look like -ENETUNREACH is
the "default" error, while that statement has no effect.

Also note that after commit fc75fc8339e7 ("ipv4: dont create routes
on down devices"), we would get -ENETUNREACH if the device is down,
but -EINVAL if the source address is specified and we can't resolve
the route, and this appears to be rather inconsistent.

Reported-by: Stefan Walter <walteste@inf.ethz.ch>
Analysed-by: Benjamin Coddington <bcodding@redhat.com>
Analysed-by: Gonzalo Siero <gsierohu@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix panic due to ocfs2_wq is null

commit b918c43021baaa3648de09e19a4a3dd555a45f40 upstream.

mount.ocfs2 failed when reading ocfs2 filesystem superblock encounters
an error.  ocfs2_initialize_super() returns before allocating ocfs2_wq.
ocfs2_dismount_volume() triggers the following panic.

  Oct 15 16:09:27 cnwarekv-205120 kernel: On-disk corruption discovered.Please run fsck.ocfs2 once the filesystem is unmounted.
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_read_locked_inode:537 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:458 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:491 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_initialize_super:2313 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_fill_super:1033 ERROR: status = -30
  ------------[ cut here ]------------
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 11753 Comm: mount.ocfs2 Tainted: G  E
        4.14.148-200.ckv.x86_64 #1
  Hardware name: Sugon H320-G30/35N16-US, BIOS 0SSDX017 12/21/2018
  task: ffff967af0520000 task.stack: ffffa5f05484000
  RIP: 0010:mutex_lock+0x19/0x20
  Call Trace:
    flush_workqueue+0x81/0x460
    ocfs2_shutdown_local_alloc+0x47/0x440 [ocfs2]
    ocfs2_dismount_volume+0x84/0x400 [ocfs2]
    ocfs2_fill_super+0xa4/0x1270 [ocfs2]
    ? ocfs2_initialize_super.isa.211+0xf20/0xf20 [ocfs2]
    mount_bdev+0x17f/0x1c0
    mount_fs+0x3a/0x160

Link: http://lkml.kernel.org/r/1571139611-24107-1-git-send-email-yili@winhong.com
Signed-off-by: Yi Li <yilikernel@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/radeon: Fix EEH during kexec"

[ Upstream commit 8d13c187c42e110625d60094668a8f778c092879 ]

This reverts commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6.

This breaks some boards.  Maybe just enable this on PPC for
now?

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205147
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid0: fix warning message for parameter default_layout

[ Upstream commit 3874d73e06c9b9dc15de0b7382fc223986d75571 ]

The message should match the parameter, i.e. raid0.default_layout.

Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ivan Topolsky <doktor.yak@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

namespace: fix namespace.pl script to support relative paths

[ Upstream commit 82fdd12b95727640c9a8233c09d602e4518e71f7 ]

The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.

This behavior was changed in 7e1c04779efd ("kbuild: Use relative path
for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.

The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Set macpassthru in reset_resume callback

[ Upstream commit a54cdeeb04fc719e4c7f19d6e28dba7ea86cee5b ]

r8152 may fail to establish network connection after resume from system
suspend.

If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write()

[ Upstream commit 53de429f4e88f538f7a8ec2b18be8c0cd9b2c8e1 ]

In function mdio_sc_cfg_reg_write(), variable "reg_value" could be
uninitialized if regmap_read() fails. However, "reg_value" is used
to decide the control flow later in the if statement, which is
potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: Loongson: Fix the link time qualifier of 'serial_exit()'

[ Upstream commit 25b69a889b638b0b7e51e2c4fe717a66bec0e566 ]

'exit' functions should be marked as __exit, not __init.

Fixes: 85cc028817ef ("mips: make loongsoon serial driver explicitly modular")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: chenhc@lemote.com
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix txq null pointer dereference

[ Upstream commit 8ed31a264065ae92058ce54aa3cc8da8d81dc6d7 ]

If the interface type is P2P_DEVICE or NAN, read the file of
'/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a
NULL pointer dereference. As for those interface type, the
pointer sdata->vif.txq is NULL.

Unable to handle kernel NULL pointer dereference at virtual address 00000011
CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1
task: ffffffc0337e4880 task.stack: ffffff800cd20000
PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[...]
Process cat (pid: 30936, stack limit = 0xffffff800cd20000)
[...]
[<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211]
[<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211]
[<ffffff80082eff94>] full_proxy_read+0x2c/0x48
[<ffffff80081eef00>] __vfs_read+0x2c/0xd4
[<ffffff80081ef084>] vfs_read+0x8c/0x108
[<ffffff80081ef494>] SyS_read+0x40/0x7c

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: fix null pointer dereference

[ Upstream commit b501426cf86e70649c983c52f4c823b3c40d72a3 ]

If the interface is not in MESH mode, the command 'iw wlanx mpath del'
will cause kernel panic.

The root cause is null pointer access in mpp_flush_by_proxy(), as the
pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface.

Unable to handle kernel NULL pointer dereference at virtual address 00000068
[...]
PC is at _raw_spin_lock_bh+0x20/0x5c
LR is at mesh_path_del+0x1c/0x17c [mac80211]
[...]
Process iw (pid: 4537, stack limit = 0xd83e0238)
[...]
[<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211])
[<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat])
[<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c)
[<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac)
[<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34)
[<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204)
[<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370)
[<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84)
[<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228)
[<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70)
[<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44)
Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f)
---[ end trace bbd717600f8f884d ]---

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Link: https://lore.kernel.org/r/1569485810-761-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/efi: Set nonblocking callbacks

[ Upstream commit df359f0d09dc029829b66322707a2f558cb720f7 ]

Other parts of the kernel expect these nonblocking EFI callbacks to
exist and crash when running under Xen. Since the implementations of
xen_efi_set_variable() and xen_efi_query_variable_info() do not take any
locks, use them for the nonblocking callbacks too.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: dts: ar9331: fix interrupt-controller size

[ Upstream commit 0889d07f3e4b171c453b2aaf2b257f9074cdf624 ]

It is two registers each of 4 byte.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: qca8k: Use up to 7 ports for all operations

[ Upstream commit 7ae6d93c8f052b7a77ba56ed0f654e22a2876739 ]

The QCA8K family supports up to 7 ports. So use the existing
QCA8K_NUM_PORTS define to allocate the switch structure and limit all
operations with the switch ports.

This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and
disable all ports") disabled all unused ports. Since the unused ports 7-11
are outside of the correct register range on this switch some registers
were rewritten with invalid content.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Fixes: a0c02161ecfc ("net: dsa: variable number of ports")
Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am4372: Set memory bandwidth limit for DISPC

[ Upstream commit f90ec6cdf674248dcad85bf9af6e064bf472b841 ]

Set memory bandwidth limit to filter out resolutions above 720p@60Hz to
avoid underflow errors due to the bandwidth needs of higher resolutions.

am43xx can not provide enough bandwidth to DISPC to correctly handle
'high' resolutions.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: ca8210: prevent memory leak

[ Upstream commit 6402939ec86eaf226c8b8ae00ed983936b164908 ]

In ca8210_probe the allocated pdata needs to be assigned to
spi_device->dev.platform_data before calling ca8210_get_platform_data.
Othrwise when ca8210_get_platform_data fails pdata cannot be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix missing reset done flag for am3 and am43

[ Upstream commit 8ad8041b98c665b6147e607b749586d6e20ba73a ]

For ti,sysc-omap4 compatible devices with no sysstatus register, we do have
reset done status available in the SOFTRESET bit that clears when the reset
is done. This is documented for example in am437x TRM for DMTIMER_TIOCP_CFG
register. The am335x TRM just says that SOFTRESET bit value 1 means reset is
ongoing, but it behaves the same way clearing after reset is done.

With the ti-sysc driver handling this automatically based on no sysstatus
register defined, we see warnings if SYSC_HAS_RESET_STATUS is missing in the
legacy platform data:

ti-sysc 48042000.target-module: sysc_flags 00000222 != 00000022
ti-sysc 48044000.target-module: sysc_flags 00000222 != 00000022
ti-sysc 48046000.target-module: sysc_flags 00000222 != 00000022
...

Let's fix these warnings by adding SYSC_HAS_RESET_STATUS. Let's also
remove the useless parentheses while at it.

If it turns out we do have ti,sysc-omap4 compatible devices without a
working SOFTRESET bit we can set up additional quirk handling for it.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix unbound sleep in fcport delete path.

[ Upstream commit c3b6a1d397420a0fdd97af2f06abfb78adc370df ]

There are instances, though rare, where a LOGO request cannot be sent out
and the thread in free session done can wait indefinitely. Fix this by
putting an upper bound to sleep.

Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid: disable device when probe failed after enabled device

[ Upstream commit 70054aa39a013fa52eff432f2223b8bd5c0048f8 ]

For pci device, need to disable device when probe failed after enabled
device.

Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: skip shutdown if hba is not powered

[ Upstream commit f51913eef23f74c3bd07899dc7f1ed6df9e521d8 ]

In some cases, hba may go through shutdown flow without successful
initialization and then make system hang.

For example, if ufshcd_change_power_mode() gets error and leads to
ufshcd_hba_exit() to release resources of the host, future shutdown flow
may hang the system since the host register will be accessed in unpowered
state.

To solve this issue, simply add checking to skip shutdown for above kind of
situation.

Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.150

xfs: clear sb->s_fs_info on mount failure

commit c9fbd7bbc23dbdd73364be4d045e5d3612cf6e82 upstream.

We recently had an oops reported on a 4.14 kernel in
xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage
and so the m_perag_tree lookup walked into lala land.

Essentially, the machine was under memory pressure when the mount
was being run, xfs_fs_fill_super() failed after allocating the
xfs_mount and attaching it to sb->s_fs_info. It then cleaned up and
freed the xfs_mount, but the sb->s_fs_info field still pointed to
the freed memory. Hence when the superblock shrinker then ran
it fell off the bad pointer.

With the superblock shrinker problem fixed at teh VFS level, this
stale s_fs_info pointer is still a problem - we use it
unconditionally in ->put_super when the superblock is being torn
down, and hence we can still trip over it after a ->fill_super
call failure. Hence we need to clear s_fs_info if
xfs-fs_fill_super() fails, and we need to check if it's valid in
the places it can potentially be dereferenced after a ->fill_super
failure.

Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm: Fix MWAITX C-state hint value

commit 454de1e7d970d6bc567686052329e4814842867c upstream.

As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose
and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint
of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf.

Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix
this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0.

This hasn't had any implications so far because setting reserved bits in
EAX is simply ignored by the CPU.

 [ bp: Fixup comment in delay_mwaitx() and massage. ]

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20191007190011.4859-1-Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Get trace_array reference for available_tracers files

commit 194c2c74f5532e62c218adeb8e2b683119503907 upstream.

As instances may have different tracers available, we need to look at the
trace_array descriptor that shows the list of the available tracers for the
instance. But there's a race between opening the file and an admin
deleting the instance. The trace_array_get() needs to be called before
accessing the trace_array.

Cc: stable@vger.kernel.org
Fixes: 607e2ea167e56 ("tracing: Set up infrastructure to allow tracers for instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Get a reference counter for the trace_array on filter files

commit 9ef16693aff8137faa21d16ffe65bb9832d24d71 upstream.

The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for
an instance now. They need to take a reference to the instance otherwise
there could be a race between accessing the files and deleting the instance.

It wasn't until the :mod: caching where these file operations started
referencing the trace_array directly.

Cc: stable@vger.kernel.org
Fixes: 673feb9d76ab3 ("ftrace: Add :mod: caching infrastructure to trace_array")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency

commit fc64e4ad80d4b72efce116f87b3174f0b7196f8e upstream.

max_latency is intended to record the maximum ever observed hardware
latency, which may occur in either part of the loop (inner/outer). So
we need to also consider the outer-loop sample when updating
max_latency.

Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu
Fixes: e7c15cd8a113 ("tracing: Added hardware latency tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hwlat: Report total time spent in all NMIs during the sample

commit 98dc19c11470ee6048aba723d77079ad2cda8a52 upstream.

nmi_total_ts is supposed to record the total time spent in *all* NMIs
that occur on the given CPU during the (active portion of the)
sampling window. However, the code seems to be overwriting this
variable for each NMI, thereby only recording the time spent in the
most recent NMI. Fix it by accumulating the duration instead.

Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu
Fixes: 7b2c86250122 ("tracing: Add NMI tracing in hwlat detector")
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: stkwebcam: fix runtime PM after driver unbind

commit 30045f2174aab7fb4db7a9cf902d0aa6c75856a7 upstream.

Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.

Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.

Note that runtime PM has never actually been enabled for this driver
since the support_autosuspend flag in its usb_driver struct is not set.

Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the locking in dcache_readdir() and friends

commit d4f4de5e5ef8efde85febb6876cd3c8ab1631999 upstream.

There are two problems in dcache_readdir() - one is that lockless traversal
of the list needs non-trivial cooperation of d_alloc() (at least a switch
to list_add_rcu(), and probably more than just that) and another is that
it assumes that no removal will happen without the directory locked exclusive.
Said assumption had always been there, never had been stated explicitly and
is violated by several places in the kernel (devpts and selinuxfs).

        * replacement of next_positive() with different calling conventions:
it returns struct list_head * instead of struct dentry *; the latter is
passed in and out by reference, grabbing the result and dropping the original
value.
        * scan is under ->d_lock.  If we run out of timeslice, cursor is moved
after the last position we'd reached and we reschedule; then the scan continues
from that place.  To avoid livelocks between multiple lseek() (with cursors
getting moved past each other, never reaching the real entries) we always
skip the cursors, need_resched() or not.
        * returned list_head * is either ->d_child of dentry we'd found or
->d_subdirs of parent (if we got to the end of the list).
        * dcache_readdir() and dcache_dir_lseek() switched to new helper.
dcache_readdir() always holds a reference to dentry passed to dir_emit() now.
Cursor is moved to just before the entry where dir_emit() has failed or into
the very end of the list, if we'd run out.
        * move_cursor() eliminated - it had sucky calling conventions and
after fixing that it became simply list_move() (in lseek and scan_positives)
or list_move_tail() (in readdir).

        All operations with the list are under ->d_lock now, and we do not
depend upon having all file removals done with parent locked exclusive
anymore.

Cc: stable@vger.kernel.org
Reported-by: "zhengbin (A)" <zhengbin13@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Disable Loongson MMI instructions for kernel build

commit 2f2b4fd674cadd8c6b40eb629e140a14db4068fd upstream.

GCC 9.x automatically enables support for Loongson MMI instructions when
using some -march= flags, and then errors out when -msoft-float is
specified with:

  cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’

The kernel shouldn't be using these MMI instructions anyway, just as it
doesn't use floating point instructions. Explicitly disable them in
order to fix the build with GCC 9.x.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E")
Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support")
Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # v2.6.32+
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix O_DIRECT accounting of number of bytes read/written

commit 031d73ed768a40684f3ca21992265ffdb6a270bf upstream.

When a series of O_DIRECT reads or writes are truncated, either due to
eof or due to an error, then we should return the number of contiguous
bytes that were received/sent starting at the offset specified by the
application.

Currently, we are failing to correctly check contiguity, and so we're
failing the generic/465 in xfstests when the race between the read
and write RPCs causes the file to get extended while the 2 reads are
outstanding. If the first read RPC call wins the race and returns with
eof set, we should treat the second read RPC as being truncated.

Reported-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Fixes: 1ccbad9f9f9bd ("nfs: fix DIO good bytes calculation")
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix incorrect updating of log root tree

commit 4203e968947071586a98b5314fd7ffdea3b4f971 upstream.

We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read.  Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.

The modification of the individual log root items are serialized on the
per-log root root_mutex.  This means that any modification to the
per-subvol log root_item is completely protected.

However we update the root item in the log root tree outside of the log
root tree log_mutex.  We do this in order to allow multiple subvolumes
to be updated in each log transaction.

This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information.  Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.

This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at.  Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.

Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree.  This way we do not modify the
log_root_tree while we're committing it, fixing the problem.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: hx711: fix bug in sampling of data

[ Upstream commit 4043ecfb5fc4355a090111e14faf7945ff0fdbd5 ]

Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.

Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.

This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.

Fixes: c3b2fdd0ea7e ("iio: adc: hx711: Add IIO driver for AVIA HX711")
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: hx711: add delay until DOUT is ready

[ Upstream commit 461631face58054c72b1f1453f2d66d71b1974e7 ]

On a system with parasitic capacitance it turned out that DOUT is not ready
after 100 ns after PD_SCK has raised. A measurement showed almost 1000 ns
until DOUT has reached its correct value.

With this patch its now possible to wait until data is ready.

The wait time should not be higher than the maximum PD_SCK high time which
is corresponding to the datasheet 50000 ns.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc

[ Upstream commit 5bdea6060618cfcf1459dca137e89aee038ac8b9 ]

In fbtft_framebuffer_alloc the error handling path should take care of
releasing frame buffer after it is allocated via framebuffer_alloc, too.
Therefore, in two failure cases the goto destination is changed to
address this issue.

Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source

[ Upstream commit e735244e2cf068f98b6384681a38993e0517a838 ]

When emulating open-drain/open-source by not actively driving the output
lines - we're simply changing their mode to input. This is wrong as it
will then make it impossible to change the value of such line - it's now
considered to actually be in input mode. If we want to still use the
direction_input() callback for simplicity then we need to set FLAG_IS_OUT
manually in gpiod_direction_output() and not clear it in
gpio_set_open_drain_value_commit() and
gpio_set_open_source_value_commit().

Fixes: c663e5f56737 ("gpio: support native single-ended hardware drivers")
Cc: stable@vger.kernel.org
Reported-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Bartosz: backported to v4.14]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: google: increment VPD key_len properly

[ Upstream commit 442f1e746e8187b9deb1590176f6b0ff19686b11 ]

Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.

On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...

Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data")
Cc: <stable@vger.kernel.org>
Cc: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/sysctl.c: do not override max_threads provided by userspace

commit b0f53dbc4bc4c371f38b14c391095a3bb8a0bb40 upstream.

Partially revert 16db3d3f1170 ("kernel/sysctl.c: threads-max observe
limits") because the patch is causing a regression to any workload which
needs to override the auto-tuning of the limit provided by kernel.

set_max_threads is implementing a boot time guesstimate to provide a
sensible limit of the concurrently running threads so that runaways will
not deplete all the memory.  This is a good thing in general but there
are workloads which might need to increase this limit for an application
to run (reportedly WebSpher MQ is affected) and that is simply not
possible after the mentioned change.  It is also very dubious to
override an admin decision by an estimation that doesn't have any direct
relation to correctness of the kernel operation.

Fix this by dropping set_max_threads from sysctl_max_threads so any
value is accepted as long as it fits into MAX_THREADS which is important
to check because allowing more threads could break internal robust futex
restriction.  While at it, do not use MIN_THREADS as the lower boundary
because it is also only a heuristic for automatic estimation and admin
might have a good reason to stop new threads to be created even when
below this limit.

This became more severe when we switched x86 from 4k to 8k kernel
stacks.  Starting since 6538b8ea886e ("x86_64: expand kernel stack to
16K") (3.16) we use THREAD_SIZE_ORDER = 2 and that halved the auto-tuned
value.

In the particular case

  3.12
  kernel.threads-max = 515561

  4.4
  kernel.threads-max = 200000

Neither of the two values is really insane on 32GB machine.

I am not sure we want/need to tune the max_thread value further.  If
anything the tuning should be removed altogether if proven not useful in
general.  But we definitely need a way to override this auto-tuning.

Link: http://lkml.kernel.org/r/20190922065801.GB18814@dhcp22.suse.cz
Fixes: 16db3d3f1170 ("kernel/sysctl.c: threads-max observe limits")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Force reval dentry if LOOKUP_REVAL flag is set

commit 0b3d0ef9840f7be202393ca9116b857f6f793715 upstream.

Mark inode for force revalidation if LOOKUP_REVAL flag is set.
This tells the client to actually send a QueryInfo request to
the server to obtain the latest metadata in case a directory
or a file were changed remotely. Only do that if the client
doesn't have a lease for the file to avoid unneeded round
trips to the server.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Force revalidate inode when dentry is stale

commit c82e5ac7fe3570a269c0929bf7899f62048e7dbc upstream.

Currently the client indicates that a dentry is stale when inode
numbers or type types between a local inode and a remote file
don't match. If this is the case attributes is not being copied
from remote to local, so, it is already known that the local copy
has stale metadata. That's why the inode needs to be marked for
revalidation in order to tell the VFS to lookup the dentry again
before openning a file. This prevents unexpected stale errors
to be returned to the user space when openning a file.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Gracefully handle QueryInfo errors during open

commit 30573a82fb179420b8aac30a3a3595aa96a93156 upstream.

Currently if the client identifies problems when processing
metadata returned in CREATE response, the open handle is being
leaked. This causes multiple problems like a file missing a lease
break by that client which causes high latencies to other clients
accessing the file. Another side-effect of this is that the file
can't be deleted.

Fix this by closing the file after the client hits an error after
the file was opened and the open descriptor wasn't returned to
the user space. Also convert -ESTALE to -EOPENSTALE to allow
the VFS to revalidate a dentry and retry the open.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>