GitHub/mt8127/android_kernel_alcatel_ttab.git
16 years agoext4: Add new functions for searching extent tree
Alex Tomas [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Add new functions for searching extent tree

Add the functions ext4_ext_search_left() and ext4_ext_search_right(),
which are used by mballoc during ext4_ext_get_blocks to decided whether
to merge extent information.

Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@clusterfs.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Add ext4_find_next_bit()
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Add ext4_find_next_bit()

This function is used by the ext4 multi block allocator patches.

Also add generic_find_next_le_bit

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
16 years agoext4: fix up EXT4FS_DEBUG builds
Eric Sandeen [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: fix up EXT4FS_DEBUG builds

Builds with EXT4FS_DEBUG defined (to enable ext4_debug()) fail
without these changes.  Clean up some format warnings too.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agoext4: Fix ext4_show_options to show the correct mount options.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Fix ext4_show_options to show the correct mount options.

We need to look at the default value and make sure
the mount options are not set via default value
before showing them via ext4_show_options

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Add EXT4_IOC_MIGRATE ioctl
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:26 +0000 (23:58 -0500)]
ext4: Add EXT4_IOC_MIGRATE ioctl

The below patch add ioctl for migrating ext3 indirect block mapped inode
to ext4 extent mapped inode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Add inode version support in ext4
Jean Noel Cordenner [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Add inode version support in ext4

This patch adds 64-bit inode version support to ext4. The lower 32 bits
are stored in the osd1.linux1.l_i_version field while the high 32 bits
are stored in the i_version_hi field newly created in the ext4_inode.
This field is incremented in case the ext4_inode is large enough. A
i_version mount option has been added to enable the feature.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jean Noel Cordenner <jean-noel.cordenner@bull.net>
16 years agovfs: Add 64 bit i_version support
Jean Noel Cordenner [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
vfs: Add 64 bit i_version support

The i_version field of the inode is changed to be a 64-bit counter that
is set on every inode creation and that is incremented every time the
inode data is modified (similarly to the "ctime" time-stamp).
The aim is to fulfill a NFSv4 requirement for rfc3530.
This first part concerns the vfs, it converts the 32-bit i_version in
the generic inode to a 64-bit, a flag is added in the super block in
order to check if the feature is enabled and the i_version is
incremented in the vfs.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Jean Noel Cordenner <jean-noel.cordenner@bull.net>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
16 years agoext4: Add the journal checksum feature
Girish Shilamkar [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Add the journal checksum feature

The journal checksum feature adds two new flags i.e
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM.

JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the
checksum for the blocks described by the descriptor blocks.
Due to checksums, writing of the commit record no longer needs to be
synchronous. Now commit record can be sent to disk without waiting for
descriptor blocks to be written to disk. This behavior is controlled
using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be
able to recover the journal with _ASYNC_COMMIT hence it is made
incompat.
The commit header has been extended to hold the checksum along with the
type of the checksum.

For recovery in pass scan checksums are verified to ensure the sanity
and completeness(in case of _ASYNC_COMMIT) of every transaction.

Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agojbd2: jbd2 stats through procfs
Johann Lombardi [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
jbd2: jbd2 stats through procfs

The patch below updates the jbd stats patch to 2.6.20/jbd2.
The initial patch was posted by Alex Tomas in December 2005
(http://marc.info/?l=linux-ext4&m=113538565128617&w=2).
It provides statistics via procfs such as transaction lifetime and size.

Sometimes, investigating performance problems, i find useful to have
stats from jbd about transaction's lifetime, size, etc. here is a
patch for review and inclusion probably.

for example, stats after creation of 3M files in htree directory:

[root@bob ~]# cat /proc/fs/jbd/sda/history
R/C  tid   wait  run   lock  flush log   hndls  block inlog ctime write drop  close
R    261   8260  2720  0     0     750   9892   8170  8187
C    259                                                    750   0     4885  1
R    262   20    2200  10    0     770   9836   8170  8187
R    263   30    2200  10    0     3070  9812   8170  8187
R    264   0     5000  10    0     1340  0      0     0
C    261                                                    8240  3212  4957  0
R    265   8260  1470  0     0     4640  9854   8170  8187
R    266   0     5000  10    0     1460  0      0     0
C    262                                                    8210  2989  4868  0
R    267   8230  1490  10    0     4440  9875   8171  8188
R    268   0     5000  10    0     1260  0      0     0
C    263                                                    7710  2937  4908  0
R    269   7730  1470  10    0     3330  9841   8170  8187
R    270   0     5000  10    0     830   0      0     0
C    265                                                    8140  3234  4898  0
C    267                                                    720   0     4849  1
R    271   8630  2740  20    0     740   9819   8170  8187
C    269                                                    800   0     4214  1
R    272   40    2170  10    0     830   9716   8170  8187
R    273   40    2280  0     0     3530  9799   8170  8187
R    274   0     5000  10    0     990   0      0     0

where,

R     - line for transaction's life from T_RUNNING to T_FINISHED
C     - line for transaction's checkpointing
tid   - transaction's id
wait  - for how long we were waiting for new transaction to start
         (the longest period journal_start() took in this transaction)
run   - real transaction's lifetime (from T_RUNNING to T_LOCKED
lock  - how long we were waiting for all handles to close
         (time the transaction was in T_LOCKED)
flush - how long it took to flush all data (data=ordered)
log   - how long it took to write the transaction to the log
hndls - how many handles got to the transaction
block - how many blocks got to the transaction
inlog - how many blocks are written to the log (block + descriptors)
ctime - how long it took to checkpoint the transaction
write - how many blocks have been written during checkpointing
drop  - how many blocks have been dropped during checkpointing
close - how many running transactions have been closed to checkpoint this one

all times are in msec.

[root@bob ~]# cat /proc/fs/jbd/sda/info
280 transaction, each upto 8192 blocks
average:
  1633ms waiting for transaction
  3616ms running transaction
  5ms transaction was being locked
  1ms flushing data (in ordered mode)
  1799ms logging transaction
  11781 handles per transaction
  5629 blocks per transaction
  5641 logged blocks per transaction

Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
16 years agoext4: Take read lock during overwrite case.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:29 +0000 (23:58 -0500)]
ext4: Take read lock during overwrite case.

When we are overwriting a file and not actually allocating new file system
blocks we need to take only the read lock on i_data_sem.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Convert truncate_mutex to read write semaphore.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:26 +0000 (23:58 -0500)]
ext4: Convert truncate_mutex to read write semaphore.

We are currently taking the truncate_mutex for every read. This would have
performance impact on large CPU configuration. Convert the lock to read write
semaphore and take read lock when we are trying to read the file.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Make ext4_get_blocks_wrap take the truncate_mutex early.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Make ext4_get_blocks_wrap take the truncate_mutex early.

When doing a migrate from ext3 to ext4 inode we need to make sure the test
for inode type and walking inode data happens inside  lock. To make this
happen move truncate_mutex early before checking the i_flags.

This actually should enable us to remove the verify_chain().

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: remove unused code from ext4_find_entry()
Mariusz Kozlowski [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: remove unused code from ext4_find_entry()

The unused code found in ext3_find_entry() is also present (and still
unused) in the ext4_find_entry() code. This patch removes it.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Check for the correct error return from
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Check for the correct error return from

ext4_ext_get_blocks returns negative values on error. We should
check for  <= 0

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agojbd2: Fix assertion failure in fs/jbd2/checkpoint.c
Jan Kara [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
jbd2: Fix assertion failure in fs/jbd2/checkpoint.c

Before we start committing a transaction, we call
__journal_clean_checkpoint_list() to cleanup transaction's written-back
buffers.

If this call happens to remove all of them (and there were already some
buffers), __journal_remove_checkpoint() will decide to free the transaction
because it isn't (yet) a committing transaction and soon we fail some
assertion - the transaction really isn't ready to be freed :).

We change the check in __journal_remove_checkpoint() to free only a
transaction in T_FINISHED state.  The locking there is subtle though (as
everywhere in JBD ;().  We use j_list_lock to protect the check and a
subsequent call to __journal_drop_transaction() and do the same in the end
of journal_commit_transaction() which is the only place where a transaction
can get to T_FINISHED state.

Probably I'm too paranoid here and such locking is not really necessary -
checkpoint lists are processed only from log_do_checkpoint() where a
transaction must be already committed to be processed or from
__journal_clean_checkpoint_list() where kjournald itself calls it and thus
transaction cannot change state either.  Better be safe if something
changes in future...

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
16 years agojbd2: Remove printk from J_ASSERT to preserve registers during BUG
Chris Snook [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
jbd2: Remove printk from J_ASSERT to preserve registers during BUG

Signed-off-by: Chris Snook <csnook@redhat.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: add block bitmap validation
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: add block bitmap validation

When a new block bitmap is read from disk in read_block_bitmap()
there are a few bits that should ALWAYS be set.  In particular,
the blocks given corresponding to block bitmap, inode bitmap and inode tables.
Validate the block bitmap against these blocks.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoAdd buffer head related helper functions
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:26 +0000 (23:58 -0500)]
Add buffer head related helper functions

Add buffer head related helper function bh_uptodate_or_lock and
bh_submit_read which can be used by file system

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Change the default behaviour on error
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:26 +0000 (23:58 -0500)]
ext4: Change the default behaviour on error

ext4 file system was by default ignoring errors and continuing. This
is not a good default as continuing on error could lead to file system
corruption. Change the default to mark the file system
readonly. Debian and ubuntu already does this as the default in their
fstab.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agoext4: fix oops on corrupted ext4 mount
Eric Sandeen [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: fix oops on corrupted ext4 mount

When mounting an ext4 filesystem with corrupted s_first_data_block, things
can go very wrong and oops.

Because blocks_count in ext4_fill_super is a u64, and we must use do_div,
the calculation of db_count is done differently than on ext4.  If
first_data_block is corrupted such that it is larger than ext4_blocks_count,
for example, then the intermediate blocks_count value may go negative,
but sign-extend to a very large value:

        blocks_count = (ext4_blocks_count(es) -
                        le32_to_cpu(es->s_first_data_block) +
                        EXT4_BLOCKS_PER_GROUP(sb) - 1);

This is then assigned to s_groups_count which is an unsigned long:

        sbi->s_groups_count = blocks_count;

This may result in a value of 0xFFFFFFFF which is then used to compute
db_count:

        db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
                   EXT4_DESC_PER_BLOCK(sb);

and in this case db_count will wind up as 0 because the addition overflows
32 bits.  This in turn causes the kmalloc for group_desc to be of 0 size:

        sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
                                    GFP_KERNEL);

and eventually in ext4_check_descriptors, dereferencing
sbi->s_group_desc[desc_block] will result in a NULL pointer dereference.

The simplest test seems to be to sanity check s_first_data_block,
EXT4_BLOCKS_PER_GROUP, and ext4_blocks_count values to be sure
their combination won't result in a bad intermediate value for
blocks_count.  We could just check for db_count == 0, but
catching it at the root cause seems like it provides more info.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
16 years agoext4/super.c: fix #ifdef's (CONFIG_EXT4_* -> CONFIG_EXT4DEV_*)
Adrian Bunk [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4/super.c: fix #ifdef's (CONFIG_EXT4_* -> CONFIG_EXT4DEV_*)

Based on a report by Robert P. J. Day.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
16 years agoext4: Return after ext4_error in case of failures
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Return after ext4_error in case of failures

This fix some instances where we were continuing after calling
ext4_error. ext4_error call panic only if errors=panic mount option is
set. So we need to make sure we return correctly after ext4_error call

Reported by: Adrian Bunk <bunk@kernel.org>

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: sync up block group descriptor with e2fsprogs.
Coly Li [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: sync up block group descriptor with e2fsprogs.

This patch extends bg_itable_unused of ext4 group descriptor
from 16bit into 32bit. In order to add bg_itable_unused_hi into
struct ext4_group_desc, some extra fields which are already introduced into
e2fsprogs are also added in for consistency.

Signed-off-by: Coly Li <coyli@suse.de>
Cc: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agoext3: Fix the max file size for ext3 file system.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:26 +0000 (23:58 -0500)]
ext3: Fix the max file size for ext3 file system.

The max file size for ext3 file system is now calculated
with hardcoded 4K block size. The patch fixes it to be
calculated with the right block size.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext2: Fix the max file size for ext2 file system.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:26 +0000 (23:58 -0500)]
ext2: Fix the max file size for ext2 file system.

The max file size for ext2 file system is now calculated
with hardcoded 4K block size. The patch fixes it to be
calculated with the right block size.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: store maxbytes for bitmapped files and return EFBIG as appropriate
Eric Sandeen [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: store maxbytes for bitmapped  files and return EFBIG as appropriate

Calculate & store the max offset for bitmapped files, and
catch too-large seeks, truncates, and writes in ext4, shortening
or rejecting as appropriate.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
16 years agoext4: export iov_shorten from kernel for ext4's use
Eric Sandeen [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: export iov_shorten from kernel for ext4's use

Export iov_shorten() from kernel so that ext4 can
truncate too-large writes to bitmapped files.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
16 years agoext4: different maxbytes functions for bitmap & extent files
Eric Sandeen [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: different maxbytes functions for bitmap & extent files

use 2 different maxbytes functions for bitmapped & extent-based
files.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
16 years agoext4: Support large files
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Support large files

This patch converts ext4_inode i_blocks to represent total
blocks occupied by the inode in file system block size.
Earlier the variable used to represent this in 512 byte
block size. This actually limited the total size of the file.

The feature is enabled transparently when we write an inode
whose i_blocks cannot be represnted as 512 byte units in a
48 bit variable.

inode flag  EXT4_HUGE_FILE_FL

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Add support for 48 bit inode i_blocks.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:26 +0000 (23:58 -0500)]
ext4: Add support for 48 bit inode i_blocks.

Use the __le16 l_i_reserved1 field of the linux2 struct of ext4_inode
to represet the higher 16 bits for i_blocks. With this change max_file
size becomes (2**48 -1 )* 512 bytes.

We add a RO_COMPAT feature to the super block to indicate that inode
have i_blocks represented as a split 48 bits. Super block with this
feature set cannot be mounted read write on a kernel with CONFIG_LSF
disabled.

Super block flag EXT4_FEATURE_RO_COMPAT_HUGE_FILE

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Rename i_dir_acl to i_size_high
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Rename i_dir_acl to i_size_high

Rename ext4_inode.i_dir_acl to i_size_high
drop ext4_inode_info.i_dir_acl as it is not used
Rename ext4_inode.i_size to ext4_inode.i_size_lo
Add helper function for accessing the ext4_inode combined i_size.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Rename i_file_acl to i_file_acl_lo
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Rename i_file_acl to i_file_acl_lo

Rename i_file_acl to i_file_acl_lo. This helps
in finding bugs where we use i_file_acl instead
of the combined i_file_acl_lo and i_file_acl_high

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Fix sparse warnings.
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4:  Fix sparse warnings.

Fix sparse warnings related to static functions
and local variables.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Introduce ext4_update_*_feature
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Introduce ext4_update_*_feature

Introduce ext4_update_*_feature and use them instead
of opencoding.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: fixes block group number being set to a negative value
Avantika Mathur [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: fixes block group number being set to a negative value

This patch fixes various places where the group number is set to a negative
value.

Signed-off-by: Avantika Mathur <mathur@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: add ext4_group_t, and change all group variables to this type.
Avantika Mathur [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: add ext4_group_t, and change all group variables to this type.

In many places variables for block group are of type int, which limits the
maximum number of block groups to 2^31.  Each block group can have up to
2^15 blocks, with a 4K block size,  and the max filesystem size is limited to
2^31 * (2^15 * 2^12) = 2^58  -- or 256 PB

This patch introduces a new type ext4_group_t, of type unsigned long, to
represent block group numbers in ext4.
All occurrences of block group variables are converted to type ext4_group_t.

Signed-off-by: Avantika Mathur <mathur@us.ibm.com>
16 years agoext4 extents: remove unneeded casts
Eric Sandeen [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4 extents: remove unneeded casts

There are many casts in extents.c which are not needed,
as the variables are already the type of the cast, or
are being promoted for no particular reason in printk's.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agoext4: Introduce ext4_lblk_t
Aneesh Kumar K.V [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Introduce ext4_lblk_t

This patch adds a new data type ext4_lblk_t to represent
the logical file blocks.

This is the preparatory patch to support large files in ext4
The follow up patch with convert the ext4_inode i_blocks to
represent the number of blocks in file system block size. This
changes makes it possible to have a block number 2**32 -1 which
will result in overflow if the block number is represented by
signed long. This patch convert all the block number to type
ext4_lblk_t which is typedef to __u32

Also remove dead code ext4_ext_walk_space

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
16 years agoext4: Avoid rec_len overflow with 64KB block size
Jan Kara [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4: Avoid rec_len overflow with 64KB block size

With 64KB blocksize, a directory entry can have size 64KB which does not fit
into 16 bits we have for entry lenght. So we store 0xffff instead and convert
value when read from / written to disk. The patch also converts some places
to use ext4_next_entry() when we are changing them anyway.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agoext4: Support large blocksize up to PAGESIZE
Takashi Sato [Tue, 29 Jan 2008 04:58:27 +0000 (23:58 -0500)]
ext4:  Support large blocksize up to PAGESIZE

This patch set supports large block size(>4k, <=64k) in ext4,
just enlarging the block size limit. But it is NOT possible to have 64kB
blocksize on ext4 without some changes to the directory handling
code.  The reason is that an empty 64kB directory block would have a
rec_len == (__u16)2^16 == 0, and this would cause an error to be hit in
the filesystem.  The proposed solution is treat 64k rec_len
with a an impossible value like rec_len = 0xffff to handle this.

The Patch-set consists of the following 2 patches.
  [1/2]  ext4: enlarge blocksize
         - Allow blocksize up to pagesize

  [2/2]  ext4: fix rec_len overflow
         - prevent rec_len from overflow with 64KB blocksize

Now on 64k page ppc64 box runs with this patch set we could create a 64k
block size ext4dev, and able to handle empty directory block.

Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Mon, 28 Jan 2008 22:00:01 +0000 (09:00 +1100)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] constify function pointer tables
  [WATCHDOG] TXx9 watchdog driver
  [WATCHDOG] misc_register patch
  [WATCHDOG] wdt: fix locking

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Mon, 28 Jan 2008 21:52:50 +0000 (08:52 +1100)]
Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (197 commits)
  sh: add spi header and r2d platform data V3
  sh: update r7780rp interrupt code
  sh: remove consistent alloc stuff from the machine vector
  sh: use declared coherent memory for dreamcast pci ethernet adapter
  sh: declared coherent memory support V2
  sh: Add support for SDK7780 board.
  sh: constify function pointer tables
  sh: Kill off -traditional for linker script.
  cdrom: Add support for Sega Dreamcast GD-ROM.
  sh: Kill off hs7751rvoip reference from arch/sh/Kconfig.
  sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.
  sh: Kill off dead HS771RVoIP board support.
  sh: r7785rp: Fix up DECLARE_INTC_DESC() arg mismatch.
  sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors.
  sh: r2d - enable sm501 usb host function
  sh: remove voyagergx
  sh: r2d - add lcd planel timings to sm501 platform data
  sh: Add OHCI and UDC platform devices for SH7720.
  sh: intc - remove default interrupt priority tables
  sh: Correct pte size mismatch for X2 TLB.
  ...

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Mon, 28 Jan 2008 21:52:20 +0000 (08:52 +1100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (24 commits)
  HID: ADS/Tech Radio si470x needs blacklist entry
  HID: Logitech Extreme 3D needs NOGET quirk
  HID: Refactor MS Presenter 8K key mapping
  HID: MS Presenter mapping for PID 0x0701
  HID: Support Samsung IR remote
  HID: fix compilation of hidbp drivers without usbhid
  HID: Blacklist the Gretag-Macbeth Huey display colorimeter
  HID: the `bit' in hidinput_mapping_quirks() is an out parameter
  HID: remove redundant WARN_ON()s in order not to scare users
  HID: force hiddev creation for SONY PS3 controller
  HID: Use hid blacklist in usbmouse/usbkbd
  HID: proper handling of MS 4k and 6k devices
  HID: remove unused variable in quirk event handler
  HID: hid-input quirk for BTC 8193
  HID: separate hid-input event quirks from generic code
  HID: refactor mapping to input subsystem for quirky devices
  HID: Microsoft Wireless Optical Desktop 3.0 quirk
  HID: Add support for Logitech Elite keyboards
  HID: add full support for Genius KB-29E
  HID: fix a potential bug in pointer casting
  ...

16 years agoMerge branch 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Mon, 28 Jan 2008 21:51:56 +0000 (08:51 +1100)]
Merge branch 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block

* 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block:
  block: implement drain buffers
  __bio_clone: don't calculate hw/phys segment counts
  block: allow queue dma_alignment of zero
  blktrace: Add blktrace ioctls to SCSI generic devices

16 years agoMerge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Mon, 28 Jan 2008 21:51:32 +0000 (08:51 +1100)]
Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-block

* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits)
  blk_end_request: changing xsysace (take 4)
  blk_end_request: changing ub (take 4)
  blk_end_request: cleanup of request completion (take 4)
  blk_end_request: cleanup 'uptodate' related code (take 4)
  blk_end_request: remove/unexport end_that_request_* (take 4)
  blk_end_request: changing scsi (take 4)
  blk_end_request: add bidi completion interface (take 4)
  blk_end_request: changing ide-cd (take 4)
  blk_end_request: add callback feature (take 4)
  blk_end_request: changing ide normal caller (take 4)
  blk_end_request: changing cpqarray (take 4)
  blk_end_request: changing cciss (take 4)
  blk_end_request: changing ide-scsi (take 4)
  blk_end_request: changing s390 (take 4)
  blk_end_request: changing mmc (take 4)
  blk_end_request: changing i2o_block (take 4)
  blk_end_request: changing viocd (take 4)
  blk_end_request: changing xen-blkfront (take 4)
  blk_end_request: changing viodasd (take 4)
  blk_end_request: changing sx8 (take 4)
  ...

16 years agoMerge branch 'sg' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Mon, 28 Jan 2008 21:51:05 +0000 (08:51 +1100)]
Merge branch 'sg' of git://git.kernel.dk/linux-2.6-block

* 'sg' of git://git.kernel.dk/linux-2.6-block:
  SG: work with the SCSI fixed maximum allocations.
  SG: Convert SCSI to use scatterlist helpers for sg chaining
  SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers

16 years agoMerge branch 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Mon, 28 Jan 2008 21:50:42 +0000 (08:50 +1100)]
Merge branch 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block

* 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: kill some big inlines
  cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions
  kernel: add CLONE_IO to specifically request sharing of IO contexts
  io_context sharing - anticipatory changes
  block: cfq: make the io contect sharing lockless
  io_context sharing - cfq changes
  io context sharing: preliminary support
  ioprio: move io priority from task_struct to io_context

16 years agoMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 28 Jan 2008 21:49:49 +0000 (08:49 +1100)]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (176 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

16 years agolibata: Change "write_data" to "rw" for some function documentations
Linus Nilsson [Mon, 28 Jan 2008 14:56:27 +0000 (15:56 +0100)]
libata: Change "write_data" to "rw" for some function documentations

The documentation for ata_data_xfer and ata_data_xfer_noirq had the 'rw'
parameter named 'write_data'.

Signed-off-by: Linus Nilsson <lajnold@acc.umu.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoHID: ADS/Tech Radio si470x needs blacklist entry
Tobias Lorenz [Sun, 27 Jan 2008 21:19:22 +0000 (22:19 +0100)]
HID: ADS/Tech Radio si470x needs blacklist entry

This patch adds blacklist entries in hid-quirks.c to let the usbhid driver
ignore the si470x radio devices. They are now handled by the new radio-si470x
driver.

Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Logitech Extreme 3D needs NOGET quirk
Jiri Kosina [Thu, 17 Jan 2008 14:23:11 +0000 (15:23 +0100)]
HID: Logitech Extreme 3D needs NOGET quirk

Logitech Extreme 3D needs NOGET quirk, otherwise it times out at
the time of connect.

Reported-by: Mike Sharov <msharov@softhome.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Refactor MS Presenter 8K key mapping
Jan Kiszka [Mon, 14 Jan 2008 12:08:27 +0000 (13:08 +0100)]
HID: Refactor MS Presenter 8K key mapping

Following the suggestion of Jonas, this patch maps the special keys of
the MS Presenter 8000 to targets that should allow for better re-mapping
according to individual use cases (i.e. I avoided hard-wiring to
standard keys). This time I also included the last missing key event
(switching back from presentation mode).

The optimal Xmodmap customization for using the Presenter with
OpenOffice now looks like this for me:

keycode 175 = Escape
keycode 179 = F5
keysym XF86Forward = Right
keysym XF86Back = Left

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: MS Presenter mapping for PID 0x0701
Jiri Kosina [Thu, 10 Jan 2008 16:40:18 +0000 (17:40 +0100)]
HID: MS Presenter mapping for PID 0x0701

0x045e/0x0701 also needs the hid-input mapping quirk established by
quirk_microsoft_presenter_8k().

Reported-by: Jonas Delrue <jonas_delrue@hotmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Support Samsung IR remote
Robert Schedel [Tue, 25 Dec 2007 23:57:40 +0000 (00:57 +0100)]
HID: Support Samsung IR remote

Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the
report descriptor from the remote contains a 48 bit HID report field. HID 1.11
states: Fields may span at most 4 bytes.

This patch, based on 2.6.23, fixes this by modifying the internal report
descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is
required to fetch the information from the hiddev interface.

The burden to reconstruct the data is moved into userspace (lirc through hiddev).
There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output
applications, which trigger the creation of hiddev device automatically.

Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix compilation of hidbp drivers without usbhid
Jiri Kosina [Mon, 17 Dec 2007 15:11:27 +0000 (16:11 +0100)]
HID: fix compilation of hidbp drivers without usbhid

We can use the blacklist only if usbhid code is compiled.

Reported-by: jurriaan <thunder7@xs4all.nl>
Cc: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Blacklist the Gretag-Macbeth Huey display colorimeter
Nicolas Mailhot [Sun, 16 Dec 2007 17:16:43 +0000 (18:16 +0100)]
HID: Blacklist the Gretag-Macbeth Huey display colorimeter

The Gretag-Macbeth Huey display colorimeter claims to be an HID device but
isn't. As a result the linux HID device will claim it, preventing FLOSS
software like Argyll CMS from talking to it.

Tested-by: Frederic Crozat <fcrozat@mandriva.com>
Signed-off-by: Nicolas Mailhot <nicolas.mailhot@laposte.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: the `bit' in hidinput_mapping_quirks() is an out parameter
Fengguang Wu [Fri, 7 Dec 2007 08:35:14 +0000 (16:35 +0800)]
HID: the `bit' in hidinput_mapping_quirks() is an out parameter

Fix a panic, by changing
hidinput_mapping_quirks(,, unsigned long *bit,)
to
hidinput_mapping_quirks(,, unsigned long **bit,)

The `bit' in this function is an out parameter.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove redundant WARN_ON()s in order not to scare users
Jiri Kosina [Fri, 30 Nov 2007 10:12:58 +0000 (11:12 +0100)]
HID: remove redundant WARN_ON()s in order not to scare users

The WARN_ON() in implement() and extract() spit out stacktraces and
a lot of other information that might make users think that there is
something seriously wrong with the system. WARN_ON() should not be
deliberately triggerable by userspace application, which these can be.
Usually this WARN_ON() triggers when hid2hci utility is sending the
data that don't correspond to the device's report descriptor.

Convert these messages to more friendly printk().

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: force hiddev creation for SONY PS3 controller
Bastien Nocera [Wed, 28 Nov 2007 15:34:53 +0000 (16:34 +0100)]
HID: force hiddev creation for SONY PS3 controller

The device is not discoverable, and needs to be poked to set its master, the
Bluetooth device it will try to connect to when the "Home" button is pressed
without a cable plugged in.

Using libusb means disconnecting the device from its driver to get the report
descriptor. Using hiddev, we can poke it without relinquishing control over it,
so when you plug it in, it would still work as a pad.

This could be then used by sixpair program, after it is rewritten to use
hiddev instead of libusb.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Use hid blacklist in usbmouse/usbkbd
Pascal Terjan [Mon, 26 Nov 2007 13:03:52 +0000 (14:03 +0100)]
HID: Use hid blacklist in usbmouse/usbkbd

This fixes wacom tablets not working if usbmouse is loaded.

Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: proper handling of MS 4k and 6k devices
Jiri Kosina [Mon, 26 Nov 2007 12:26:33 +0000 (13:26 +0100)]
HID: proper handling of MS 4k and 6k devices

This removes ugly macros IS_* to distinguish devices that
need special handling in hid-input, and establish proper
quirks for them.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove unused variable in quirk event handler
Jiri Kosina [Mon, 26 Nov 2007 10:32:51 +0000 (11:32 +0100)]
HID: remove unused variable in quirk event handler

Remove unused variable in quirk event handler.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: hid-input quirk for BTC 8193
Jiri Kosina [Mon, 26 Nov 2007 12:18:00 +0000 (13:18 +0100)]
HID: hid-input quirk for BTC 8193

BTC 8193 keyboard handles its scrollwheel in very non-standard way.
It produces two non-standard usages for scrolling up and down, in
both cases with postive value equaling to 1. We handle this by temporary
mapping, which we then catch in quirk event handler, and remap to
negative HWHEEL even in order to introduce correct behavior.

Also the button requires special mapping, as it triggers standard-violating
usage code.

Reported in kernel.org bugzilla #9385

Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: separate hid-input event quirks from generic code
Jiri Kosina [Fri, 23 Nov 2007 12:16:02 +0000 (13:16 +0100)]
HID: separate hid-input event quirks from generic code

This patch separates also the hid-input quirks that have to be
applied at the time the event occurs, so that the generic code
handling HUT-compliant devices is not messed up by them too much.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: refactor mapping to input subsystem for quirky devices
Jiri Kosina [Thu, 22 Nov 2007 14:18:18 +0000 (15:18 +0100)]
HID: refactor mapping to input subsystem for quirky devices

Currently, the handling of mapping between hid and input for devices
that don't conform to HUT 1.12 specification is very messy -- no per-device
handling, no blacklists, conditions on idVendor and idProduct placed
all over the code.

This patch moves all the device-specific input mapping to a separate
file, and introduces a blacklist-style handling for non-standard
device-specific mappings.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Microsoft Wireless Optical Desktop 3.0 quirk
Drew Fisher [Sun, 18 Nov 2007 11:29:56 +0000 (12:29 +0100)]
HID: Microsoft Wireless Optical Desktop 3.0 quirk

Make the Microsoft Wireless Optical Desktop 3.0 work as a mouse.

Microsoft Wireless Optical Desktop 3.0 doesn't properly describe its interface
class.  Specifically, since it doesn't mark the second interface as a mouse
(bInterfaceSubclass = 0), it doesn't get HID_QUIRK_NOGET applied to the
interface, and then acts broken when polled.

Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Add support for Logitech Elite keyboards
Carlos Corbacho [Sat, 17 Nov 2007 00:30:25 +0000 (01:30 +0100)]
HID: Add support for Logitech Elite keyboards

Reuse the quirks from the Cordless Desktop LX500 - stops some of the extra
keys being reported as mouse buttons.

Signed-off-by: Carlos Corbacho <cathectic@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: add full support for Genius KB-29E
Jiri Kosina [Wed, 14 Nov 2007 11:13:26 +0000 (12:13 +0100)]
HID: add full support for Genius KB-29E

Genius KB-29E has broken report descriptor, which causes some of the
Consumer usages to appear incorrectly as Button usages. We fix it by
fixing the report descriptor before it is being parsed.

Also a few of the keys violate the HUT standard, so they need a special
handling. They currently fall into "Reserved" range as per HUT 1.12.

Reported-by: Szekeres Istvan <szekeres@iii.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix a potential bug in pointer casting
Li Zefan [Wed, 14 Nov 2007 10:31:05 +0000 (11:31 +0100)]
HID: fix a potential bug in pointer casting

Don't directly cast list_head * to foo *, this works only when list
is the first member of struct foo, and we should not make the assumption
how members are ordered in the structure.

i.e. struct *f = (struct *f)pos will work if:
struct foo {
struct list_head list;
int i;
};

but will fail if:
struct foo {
int i;
struct list_head list;
}

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Implement horizontal wheel handling for A4 Tech X5-005D
Pavel Troller [Mon, 29 Oct 2007 10:13:46 +0000 (11:13 +0100)]
HID: Implement horizontal wheel handling for A4 Tech X5-005D

This mouse distinguishes horizontal wheel from vertical by a special "pseudo
event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal
wheel. Because this event is supplied by the parser too late, we need to delay
a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to
input depending on the event value.

Signed-off-by: Pavel Troller <patrol@sinus.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Add support for Apple aluminum USB keyboards.
Michel Daenzer [Wed, 24 Oct 2007 14:30:37 +0000 (16:30 +0200)]
HID: Add support for Apple aluminum USB keyboards.

Reuse the existing quirks for Apple laptop USB keyboards.

Signed-off-by: Michel Daenzer <michel@tungstengraphics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Rename some code identifiers from PowerBook specific to Apple generic
Michel Daenzer [Wed, 24 Oct 2007 14:30:34 +0000 (16:30 +0200)]
HID: Rename some code identifiers from PowerBook specific to Apple generic

Preserve identifiers exposed in build and run time configuration though in
order not to break existing configurations.

This is in preparation for adding support for Apple aluminum USB keyboards.

Signed-off-by: Michel Daenzer <michel@tungstengraphics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Map MS Presenter 8000 bottom-side buttons
Jan Kiszka [Wed, 24 Oct 2007 14:24:22 +0000 (16:24 +0200)]
HID: Map MS Presenter 8000 bottom-side buttons

The MS Presenter 8000 bluetooth mouse is a "dual-use" device: If you
press a button on the top, you can turn it around and find special keys
on the other side, useful for presentations. This patch maps those three
bottom-keys that are not already detected to the intended functions. The
magic bottom on the top is mapped to F5 when we switch from mouse to
presenter mode in order to activate the presentation mode in the related
software (e.g. OpenOffice).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoMerge branch 'pxa-plat' into devel
Russell King [Mon, 28 Jan 2008 13:21:38 +0000 (13:21 +0000)]
Merge branch 'pxa-plat' into devel

* pxa-plat: (53 commits)
  [ARM] 4762/1: Basic support for Toradex Colibri module
  [ARM] pxa: fix mci_init functions returning -1
  [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
  [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270
  [ARM] 4746/1: pcm027: network support for phyCORE-PXA270
  [ARM] 4745/1: pcm027: default configuration
  [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module
  [NET] smc91x: Make smc91x use IRQ resource trigger flags
  [ARM] pxa: add default config for littleton
  [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
  [ARM] 4664/1: Add basic support for HTC Magician PDA phones
  [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
  [ARM] pxa: skip registers saving/restoring if entering standby mode
  [ARM] pxa: fix PXA27x resume
  [ARM] pxa: Avoid fiddling with CKEN register on suspend
  [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
  [ARM] pxa: Add zylonite MFP wakeup configurations
  [ARM] pxa: program MFPs for low power mode when suspending
  [ARM] pxa: make MFP configuration processor independent
  [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
  ...

Conflicts:

arch/arm/mach-pxa/ssp.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years agoMerge branch 'orion' into devel
Russell King [Mon, 28 Jan 2008 13:21:30 +0000 (13:21 +0000)]
Merge branch 'orion' into devel

* orion: (26 commits)
  [ARM] Orion: implement power-off method for QNAP TS-109/209
  [ARM] Orion: add support for QNAP TS-109/TS-209
  [ARM] Orion: I2C support
  [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries
  [I2C] Split mv643xx I2C platform support
  [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323
  [ARM] Orion defconfig
  [ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323
  [ARM] Orion: MV88F5181 support bits
  [ARM] Orion: Buffalo/Revogear Kurobox Pro support
  [ARM] OrionNAS RD board support
  [ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board
  [ARM] Orion: common platform setup for Gigabit Ethernet port
  [ARM] Orion: platform device registration for UART, USB and NAND
  [ARM] Orion: system timer support
  [ARM] Orion edge GPIO IRQ support
  [ARM] Orion: IRQ support
  [ARM] Orion: provide GPIO method for enabling hardware assisted blinking
  [ARM] Orion: GPIO support
  [ARM] Orion: programable address map support
  ...

Conflicts:

arch/arm/Kconfig
arch/arm/Makefile

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years agoMerge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410...
Russell King [Mon, 28 Jan 2008 13:21:21 +0000 (13:21 +0000)]
Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel

* at91: (24 commits)
  [ARM] 4615/4: sam926[13]ek buttons updated
  [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
  [ARM] 4764/1: [AT91] AT91CAP9 core support
  [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
  [ARM] 4761/1: [AT91] Board-support for NEW_LEDs
  [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
  [ARM] 4759/1: [AT91] Buttons on CSB300
  [ARM] 4758/1: [AT91] LEDs
  [ARM] 4757/1: [AT91] UART initialization
  [ARM] 4756/1: [AT91] Makefile cleanup
  [ARM] 4755/1: [AT91] NAND update
  [ARM] 4754/1: [AT91] SSC library support
  [ARM] 4753/1: [AT91] Use DMA_BIT_MASK
  [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9
  [ARM] 4751/1: [AT91] ISI peripheral on SAM9263
  [ARM] 4750/1: [AT91] STN LCD displays on SAM9261
  [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY
  [ARM] 4646/1: AT91: configurable HZ, default to 128
  [ARM] 4688/1: at91: speed-up irq processing
  [ARM] 4657/1: AT91: Header definition update
  ...

* ep93xx:
  [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations
  [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type
  [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups
  [ARM] 4668/1: ep93xx: implement new GPIO API

* iop:
  [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field
  [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device
  [ARM] 4708/1: iop: update defconfigs for 2.6.24

* kprobes:
  ARM kprobes: let's enable it
  ARM kprobes: special hook for the kprobes breakpoint handler
  ARM kprobes: prevent some functions involved with kprobes from being probed
  ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack
  ARM kprobes: add the kprobes hook to the page fault handler
  ARM kprobes: core code
  ARM kprobes: instruction single-stepping support

* ks8695:
  [ARM] 4603/1: KS8695: debugfs interface to view pin state
  [ARM] 4601/1: KS8695: PCI support

* misc:
  [ARM] remove duplicate includes
  [ARM] CONFIG_DEBUG_STACK_USAGE
  [ARM] 4689/1: small comment wrap fix
  [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix
  [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h
  [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS
  [SERIAL] 21285: Report baud rate back via termios
  [ARM] Remove pointless casts from void pointers,
  [ARM] Misc minor interrupt handler cleanups
  [ARM] Remove at91_lcdc.h
  [ARM] ARRAY_SIZE() cleanup
  [ARM] Update mach-types

* msm:
  [ARM] msm: dma support for MSM7X00A
  [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)
  [ARM] msm: irq and timer support for ARCH_MSM7X00A
  [ARM] msm: core platform support for ARCH_MSM7X00A

* s3c2410: (33 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

* sa1100:
  [ARM] sa1100: add clock source support

* vfp:
  [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support
  [ARM] 4583/1: ARMv7: Add VFPv3 support
  [ARM] 4582/2: Add support for the common VFP subarchitecture

16 years ago[ARM] 4795/1: S3C244X: Add armclk and setparent call
Ben Dooks [Mon, 28 Jan 2008 12:01:35 +0000 (13:01 +0100)]
[ARM] 4795/1: S3C244X: Add armclk and setparent call

Add armclk to the supported clocks on the S3C2440 and S3C2442 to
better represent the DVS state which controls whether FCLK or HCLK
is fed to the ARM core.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
Ben Dooks [Mon, 28 Jan 2008 12:01:34 +0000 (13:01 +0100)]
[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code

Merge together the bits of the S3C2440 and S3C2442 clock code
that can be.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
Ben Dooks [Mon, 28 Jan 2008 12:01:33 +0000 (13:01 +0100)]
[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function

Add the reverse of s3c2410_gpio_getirq to convert
a IRQ  number into a GPIO pin number.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
Ben Dooks [Mon, 28 Jan 2008 12:01:32 +0000 (13:01 +0100)]
[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S

Remove warnings left in include/asm-arm/arch-s3c2410/debug-macro.S
whilst these where being experimented with.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
Ben Dooks [Mon, 28 Jan 2008 12:01:31 +0000 (13:01 +0100)]
[ARM] 4791/1: S3C2412: Make fclk a parent of msysclk

In the S3C2412 fclk is derived from msysclk, not straight from
the MPLL output. Set clk_f.parent appropriately.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
Ben Dooks [Mon, 28 Jan 2008 12:01:30 +0000 (13:01 +0100)]
[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.

The msysclk clock was checking for the wrong PLL for the
parent in s3c2412_setparent_msysclk(), trying the UPLL instead
of the MPLL output.

Also ensure the mpll and fclks are at the same rate at init time.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
Ben Dooks [Mon, 28 Jan 2008 12:01:29 +0000 (13:01 +0100)]
[ARM] 4789/1: S3C2412: Add missing CLKDIVN register values

Add S3C2412_CLKDIVN_DVSEN and S3C2412_CLKDIVN_HALFHCLK definitions to
the S3C2412_CLKDIVN set.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART...
Ben Dooks [Mon, 28 Jan 2008 12:01:28 +0000 (13:01 +0100)]
[ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.

Fix the channel parameter to s3c2410_dma_ctrl() in s3c2410_dma_enqueue()
if the S3C2410_DMAF_AUTOSTART is set on the channel.

Spotted by Steven Ryu at Samsung.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel...
Ben Dooks [Mon, 28 Jan 2008 12:01:27 +0000 (13:01 +0100)]
[ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number

The s3c2410_dma_request() function should return the channel allocated
instead of zero for success.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
Ben Dooks [Mon, 28 Jan 2008 12:01:26 +0000 (13:01 +0100)]
[ARM] 4786/1: S3C2412: Add SPI FIFO controll constants

Add control constants for the S3C2412 SPI unit FIFO.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
Ben Dooks [Mon, 28 Jan 2008 12:01:25 +0000 (13:01 +0100)]
[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers

Add definitions to allow easier decomposotion of the contents of
the S3C2410_BANKON registers

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
Ben Dooks [Mon, 28 Jan 2008 12:01:24 +0000 (13:01 +0100)]
[ARM] 4784/1: S3C24XX: Fix GPIO restore glitches

The core resume code may have caused glitches in the GPIO when
restoring the GPIO state due to the order in which the GPIO registers
were being written.

Change the restore process take into account the state of the
GPIOs on resume and the state the system wants to restore them to.

See the code comments in the patch for more details of the process.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
Ben Dooks [Mon, 28 Jan 2008 12:01:23 +0000 (13:01 +0100)]
[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()

Add the call s3c2410_gpio_getpull() to return the
current state of the pin's pull-up.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
Ben Dooks [Mon, 28 Jan 2008 12:01:22 +0000 (13:01 +0100)]
[ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users

Ensure FIQ_START is defined to allow anyone to use FIQ code on
an S3C24XX based CPU.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4781/1: S3C24XX: DMA suspend and resume support
Ben Dooks [Mon, 28 Jan 2008 12:01:21 +0000 (13:01 +0100)]
[ARM] 4781/1: S3C24XX: DMA suspend and resume support

If an DMA channel was active at suspend, then ensure that
it is correctly reconfigured when the system resumes.

Note, the previous policy was for each driver to handle their
own reconfiguration on resume. The policy has been changed to
make the individual driver's job easier.

Signed-off-by: Ben Dooks <ben-linux@flfuf.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
Ben Dooks [Mon, 28 Jan 2008 12:01:20 +0000 (13:01 +0100)]
[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX

The current S3C24XX DMA code does not allow for an peripheral
that has one channel for RX and another for TX.

This patch adds a per-cpu dma operation to select the transmit
or receive channel, and adds support to the S3C2412 for the
seperate DMA channels for TX and RX.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
Ben Dooks [Mon, 28 Jan 2008 12:01:19 +0000 (13:01 +0100)]
[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call

Add s3c2412_gpio_set_sleepcfg() to allow the setting of the sleep
configuration of the GPIO blocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4778/1: S3C2412: Add armclk and init from DVS state
Ben Dooks [Mon, 28 Jan 2008 12:01:18 +0000 (13:01 +0100)]
[ARM] 4778/1: S3C2412: Add armclk and init from DVS state

Add armclk to the S3C2412 to indicate the current clock connected to
the ARM core.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
Ben Dooks [Mon, 28 Jan 2008 12:01:17 +0000 (13:01 +0100)]
[ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk

Add checks for clk_set_rate() and ensure that we do not allow set_rate
to be called for a clock that does not have it defined. Add default
methods for fclk, hclk, pclk and mpll.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
Krzysztof Helt [Sun, 27 Jan 2008 18:01:18 +0000 (19:01 +0100)]
[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected

This patch fixes compilation error if only a machine with
s3c2442 cpu is selected but without s3c2440 cpu selected.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4731/1: S3C2412: Check for incomplete sleep
Ben Dooks [Sun, 23 Dec 2007 02:09:34 +0000 (03:09 +0100)]
[ARM] 4731/1: S3C2412: Check for incomplete sleep

Check if the sleep command returns due to a pending interrupt
in the standby unit. If this happens, try and ack the IRQ
before re-trying the resume.

It is currently unclear whether the resume can be backed out
of at this stage as this could cause a problem with level
based interrupts.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4730/1: S3C2412: Ensure the PWRCFG has the right mode for RTC wake
Ben Dooks [Sun, 23 Dec 2007 02:09:33 +0000 (03:09 +0100)]
[ARM] 4730/1: S3C2412: Ensure the PWRCFG has the right mode for RTC wake

Ensure that if the RTC IRQ is not selected for wake in the
base configuration, then the PWRCFG has the same value set
in it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4729/1: VR1000: Do not add IIS device on initialisation
Ben Dooks [Sun, 23 Dec 2007 02:09:36 +0000 (03:09 +0100)]
[ARM] 4729/1: VR1000: Do not add IIS device on initialisation

The IIS device is being registered by the Simtec Audio
driver, and thus registering here causes an error due
to device tree naming collision.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4728/1: BAST: Do not add IIS device on initialisation
Ben Dooks [Sun, 23 Dec 2007 02:09:35 +0000 (03:09 +0100)]
[ARM] 4728/1: BAST: Do not add IIS device on initialisation

The IIS device is being registered by the Simtec Audio
driver, and thus registering here causes an error due
to device tree naming collision.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>