Manu Abraham [Fri, 4 Dec 2009 08:24:47 +0000 (05:24 -0300)]
V4L/DVB (13767): [Mantis/VP-1041] Bug: Add in missing Master clock settings
Thanks to Ershov and Igor for pointing it out.
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sigmund Augdal [Fri, 4 Dec 2009 08:24:01 +0000 (05:24 -0300)]
V4L/DVB (13766): [Mantis] Bug: Fix wrong exit condition
Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:23:38 +0000 (05:23 -0300)]
V4L/DVB (13765): [Mantis] HIF I/O: Add some debug statements
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:23:17 +0000 (05:23 -0300)]
V4L/DVB (13764): [Mantis CA] SLOT: Add some debug status
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:22:57 +0000 (05:22 -0300)]
V4L/DVB (13763): [Mantis] HIF I/O: trim delays a bit appropriately
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:22:33 +0000 (05:22 -0300)]
V4L/DVB (13762): [Mantis CA] CA_MODULE: Look for the module status on driver unload as well
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:21:51 +0000 (05:21 -0300)]
V4L/DVB (13761): [Mantis] HIF I/O: Temporary workaround, use SBUF_OPDONE flag instead
Dnumgis got hit with this bug, using a temporary workaround
for the time being rather than digging deep at this point.
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sigmund Augdal [Fri, 4 Dec 2009 08:21:27 +0000 (05:21 -0300)]
V4L/DVB (13760): [Mantis CA] CA_MODULE: Look for module status on driver load
Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:21:05 +0000 (05:21 -0300)]
V4L/DVB (13759): [Mantis] HIF I/O: Use the LSB octet only
Thanks to Abylai Ospan for pointing this out.
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:20:44 +0000 (05:20 -0300)]
V4L/DVB (13758): [Mantis CA] CAM_CONTROL: Use CAMREADY_IRQ event
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:20:14 +0000 (05:20 -0300)]
V4L/DVB (13757): [Mantis CA] CAM_CONTROL: Use FRDA_IRQ Events
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:19:26 +0000 (05:19 -0300)]
V4L/DVB (13756): [Mantis CA] CAM_CONTROL: Use CAMCHANGE_IRQ events
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:18:53 +0000 (05:18 -0300)]
V4L/DVB (13755): [Mantis CA] CAM_CONTROL: Use appropriate flags
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:18:27 +0000 (05:18 -0300)]
V4L/DVB (13754): [Mantis] CAM_CONTROL: Implement TS control
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:17:46 +0000 (05:17 -0300)]
V4L/DVB (13753): [Mantis CA] SLOT_CONTROL: Implement Slot RESET
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:17:14 +0000 (05:17 -0300)]
V4L/DVB (13752): [Mantis CA] CAM_CONTROL: All CAM control operations now handled by the worker thread
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:16:24 +0000 (05:16 -0300)]
V4L/DVB (13751): [Mantis] GPIO_CONTROL: Do not toggle GPIO CW's on HIF operations
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:15:38 +0000 (05:15 -0300)]
V4L/DVB (13750): [Mantis] GPIO_CONTROL: Cache a given GPIO Bit Setup for a given event
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:15:10 +0000 (05:15 -0300)]
V4L/DVB (13749): [Mantis CA] CA_SLAVE: Do not change Slave Configuration setup
(Need to sanitize this cleanly for different Slaves)
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Magnus Horlin [Fri, 4 Dec 2009 08:14:34 +0000 (05:14 -0300)]
V4L/DVB (13748): [Mantis/VP-2040] Add support for VP-2040 (TDA10023 frontend based)
Signed-off-by: Magnus Horlin <magnus@alefors.se>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sigmund Augdal [Fri, 4 Dec 2009 08:13:21 +0000 (05:13 -0300)]
V4L/DVB (13747): [Mantis] Bug Fix!: Use Register Address rather than register field
Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:12:51 +0000 (05:12 -0300)]
V4L/DVB (13746): [Mantis CA] Bug: Remove duplicated symbol
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:12:16 +0000 (05:12 -0300)]
V4L/DVB (13745): [Mantis CA] Add some debug statements
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:11:41 +0000 (05:11 -0300)]
V4L/DVB (13744): [Mantis CA] Use Module status to signal Slot events
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:11:14 +0000 (05:11 -0300)]
V4L/DVB (13743): [Mantis CA] Use DVB_CA Tuple parser
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:10:25 +0000 (05:10 -0300)]
V4L/DVB (13742): [Mantis] Implement PCMCIA I/O Rd/Wr operations
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:09:47 +0000 (05:09 -0300)]
V4L/DVB (13741): [Mantis] Implement HIF Mem Read/Write operations
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:09:04 +0000 (05:09 -0300)]
V4L/DVB (13740): [Mantis] Schedule the work instead of handling the task directly
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:08:25 +0000 (05:08 -0300)]
V4L/DVB (13739): [Mantis] Event Manager: Handle Masked events only
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:07:41 +0000 (05:07 -0300)]
V4L/DVB (13738): [Mantis] Enable IRQ0 events
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:06:38 +0000 (05:06 -0300)]
V4L/DVB (13737): [Mantis] Register the CA device, dummy functions for now
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:06:00 +0000 (05:06 -0300)]
V4L/DVB (13736): [Mantis] Implement CAM Plug IN and Unplug events
Sigh! how i wish things were simpler ...
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:05:19 +0000 (05:05 -0300)]
V4L/DVB (13735): [Mantis] Implement the Event Manager tasklet
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:04:18 +0000 (05:04 -0300)]
V4L/DVB (13734): [Mantis] Initial go at an Event Manager
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:03:35 +0000 (05:03 -0300)]
V4L/DVB (13733): [Mantis] Start with the PCMCIA interface
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 08:00:30 +0000 (05:00 -0300)]
V4L/DVB (13732): [Mantis] Add in some Link Layer definitions
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:59:44 +0000 (04:59 -0300)]
V4L/DVB (13731): [Mantis] Add in a license header
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:59:05 +0000 (04:59 -0300)]
V4L/DVB (13730): [Mantis] Add in some UART definitions
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:53:07 +0000 (04:53 -0300)]
V4L/DVB (13729): [Mantis] Add in a license header
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:52:23 +0000 (04:52 -0300)]
V4L/DVB (13728): [Mantis] Add in some Host Interface definitions
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:48:03 +0000 (04:48 -0300)]
V4L/DVB (13727): [Mantis/VP-1041] Bugfix: Sigh! Don't look for the STOP bit
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:47:30 +0000 (04:47 -0300)]
V4L/DVB (13726): [Mantis/Skystar HD2] Add support for the Technisat Skystar HD2
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:44:55 +0000 (04:44 -0300)]
V4L/DVB (13725): [Mantis/VP-1041] Revert to old register initialization parameters, for now.
Thanks to eso46 for pointing it out
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:43:04 +0000 (04:43 -0300)]
V4L/DVB (13724): [Mantis/VP-1041] Initial support for Mantis VP-1041
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:42:22 +0000 (04:42 -0300)]
V4L/DVB (13723): [Mantis/VP-2040, Terratec Cinergy C] Add support for the Cinergy C, VP-2040 clone
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:40:50 +0000 (04:40 -0300)]
V4L/DVB (13722): [Mantis] Revert 13560
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:40:16 +0000 (04:40 -0300)]
V4L/DVB (13721): [Mantis] Bug! Before bailing out, Unlock
Thanks to hotwings <user.vdr@gmail.com> for pointing out the bug
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:39:48 +0000 (04:39 -0300)]
V4L/DVB (13720): [Mantis/Terratec Cinergy C] Add support for the Terratec Cinergy C PCI
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Fri, 4 Dec 2009 07:39:14 +0000 (04:39 -0300)]
V4L/DVB (13719): [Mantis/VP-2033] Initial test switch to the tda10021, from the cu1216
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Marko Ristola [Fri, 4 Dec 2009 07:35:35 +0000 (04:35 -0300)]
V4L/DVB (13718): [Mantis] Use gpio_set_bits to turn OFF the bits as well
Signed-off-by: Marko Ristola <marko.ristola@kolumbus.fi>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 08:48:13 +0000 (05:48 -0300)]
V4L/DVB (13717): [MB86A16] Statistics Updates
* Demodulator status check made reliable
* Code simplification for Viterbi Sync check, makes
acquisition more reliable
* Implement a BER monitor
* Implement a Signal strength monitor
* Implement a "simple" UCB monitor, no real UCB monitor
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
David Woodhouse [Thu, 3 Dec 2009 08:47:11 +0000 (05:47 -0300)]
V4L/DVB (13716): [Mantis] Bug: incorrect byte swap
You know, the worst endianness errors are not the cases where
people forget to byte-swap, but the cases where they either byte-swap
with the wrong size, or byte-swap when they shouldn't have done so at
all. Those ones defeat the casual reader of the code.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 08:46:06 +0000 (05:46 -0300)]
V4L/DVB (13715): [Mantis] Kernel I2C changes: use PCI parent device
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 08:44:38 +0000 (05:44 -0300)]
V4L/DVB (13714): [MB86A16] FIX/Code simplification: use hwconfig->ts_size instead of ts_size
thanks to Marko Ristola for pointing it out
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sigmund Augdal [Thu, 3 Dec 2009 08:44:00 +0000 (05:44 -0300)]
V4L/DVB (13713): [MB86A16] Fix: Initialize SNR/STATUS
Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 08:42:10 +0000 (05:42 -0300)]
V4L/DVB (13712): [Mantis] Add locking for concurrent access
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Marko Ristola [Thu, 3 Dec 2009 08:39:22 +0000 (05:39 -0300)]
V4L/DVB (13711): [Mantis] FIX: Do nor toggle GPIF status
Signed-off-by: Marko Ristola <marko.ristola@kolumbus.fi>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 08:38:33 +0000 (05:38 -0300)]
V4L/DVB (13710): [Mantis] FIX: Use swfilter (188/204) accordingly
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 08:37:51 +0000 (05:37 -0300)]
V4L/DVB (13709): [Mantis/VP-1034] Switch 13/18v for the VP-1034 properly
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 01:11:00 +0000 (22:11 -0300)]
V4L/DVB (13708): [Mantis] Remove some dead code
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 01:09:53 +0000 (22:09 -0300)]
V4L/DVB (13707): [Mantis] Whitespace cleanup
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 01:07:24 +0000 (22:07 -0300)]
V4L/DVB (13706): [MB86A16] Overhaul
* better ISR handling
* I2C fixes
* better handling of configurations
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 01:06:15 +0000 (22:06 -0300)]
V4L/DVB (13705): [Mantis] FIX: Do not return IRQ_HANDLED in the unlikely case
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 01:02:19 +0000 (22:02 -0300)]
V4L/DVB (13704): [MB86A16] FIX: Don't loop again, if we have SYNC
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 01:01:39 +0000 (22:01 -0300)]
V4L/DVB (13703): [MB86A16] Fix wrong message printed out
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 01:00:50 +0000 (22:00 -0300)]
V4L/DVB (13702): [MB86A16] need to wait a bit more than the computed time for a Factor of safety
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 00:59:20 +0000 (21:59 -0300)]
V4L/DVB (13701): [MB86A16] Reduce Carrier Recovery range to 3Mhz
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 00:58:38 +0000 (21:58 -0300)]
V4L/DVB (13700): [MB86A16] Need a bit of settling time
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 3 Dec 2009 00:57:10 +0000 (21:57 -0300)]
V4L/DVB (13699): [Mantis, MB86A16] Initial checkin: Mantis, MB86A16
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
KOSAKI Motohiro [Sat, 16 Jan 2010 01:01:18 +0000 (17:01 -0800)]
page allocator: update NR_FREE_PAGES only when necessary
commit
f2260e6b (page allocator: update NR_FREE_PAGES only as necessary)
made one minor regression. if __rmqueue() was failed, NR_FREE_PAGES stat
go wrong. this patch fixes it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: Huang Shijie <shijie8@gmail.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 16 Jan 2010 20:34:56 +0000 (12:34 -0800)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c: Do not use device name after device_unregister
i2c/pca: Don't use *_interruptible
i2c-ali1563: Remove sparse warnings
i2c: Test off by one in {piix4,vt596}_transaction()
i2c-core: Storage class should be before const qualifier
Linus Torvalds [Sat, 16 Jan 2010 20:31:42 +0000 (12:31 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, uv: Ensure hub revision set for all ACPI modes.
x86, uv: Add function retrieving node controller revision number
x86: xen: 64-bit kernel RPL should be 0
x86: kernel_thread() -- initialize SS to a known state
x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
x86: SGI UV: Fix mapping of MMIO registers
x86: mce.h: Fix warning in header checks
Linus Torvalds [Sat, 16 Jan 2010 20:31:30 +0000 (12:31 -0800)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
futexes: Remove rw parameter from get_futex_key()
Linus Torvalds [Sat, 16 Jan 2010 20:27:47 +0000 (12:27 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools: Check if /dev/null can be used as the -o gcc argument
perf tools: Move QUIET_STDERR def to before first use
perf: Stop stack frame walking off kernel addresses boundaries
Linus Torvalds [Sat, 16 Jan 2010 20:27:25 +0000 (12:27 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing/filters: Add comment for match callbacks
tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING
tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching
lib: Introduce strnstr()
tracing/filters: Fix MATCH_END_ONLY filter matching
tracing/filters: Fix MATCH_FRONT_ONLY filter matching
ftrace: Fix MATCH_END_ONLY function filter
tracing/x86: Derive arch from bits argument in recordmcount.pl
ring-buffer: Add rb_list_head() wrapper around new reader page next field
ring-buffer: Wrap a list.next reference with rb_list_head()
Mark Brown [Sat, 16 Jan 2010 01:01:40 +0000 (17:01 -0800)]
revert "drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer"
Fix divide by zero and broken output. Commit
600ce1a0fa ("fix clock
setting for Samsung SoC Framebuffer") introduced a mandatory refresh
parameter to the platform data for the S3C framebuffer but did not
introduce any validation code, causing existing platforms (none of which
have refresh set) to divide by zero whenever the framebuffer is
configured, generating warnings and unusable output.
Ben Dooks noted several problems with the patch:
- The platform data supplies the pixclk directly and should already
have taken care of the refresh rate.
- The addition of a window ID parameter doesn't help since only the
root framebuffer can control the pixclk.
- pixclk is specified in picoseconds (rather than Hz) as the patch
assumed.
and suggests reverting the commit so do that. Without fixing this no
mainline user of the driver will produce output.
[akpm@linux-foundation.org: don't revert the correct bit]
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:39 +0000 (17:01 -0800)]
nommu: fix shared mmap after truncate shrinkage problems
Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen
over the end of a truncation. The problem is that
ramfs_nommu_check_mappings() checks that the reduced file size against the
VMA tree, but not the vm_region tree.
The following sequence of events can cause the problem:
fd = open("/tmp/x", O_RDWR|O_TRUNC|O_CREAT, 0600);
ftruncate(fd, 32 * 1024);
a = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
b = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
munmap(a, 32 * 1024);
ftruncate(fd, 16 * 1024);
c = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
Mapping 'a' creates a vm_region covering 32KB of the file. Mapping 'b'
sees that the vm_region from 'a' is covering the region it wants and so
shares it, pinning it in memory.
Mapping 'a' then goes away and the file is truncated to the end of VMA
'b'. However, the region allocated by 'a' is still in effect, and has
_not_ been reduced.
Mapping 'c' is then created, and because there's a vm_region covering the
desired region, get_unmapped_area() is _not_ called to repeat the check,
and the mapping is granted, even though the pages from the latter half of
the mapping have been discarded.
However:
d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
Mapping 'd' should work, and should end up sharing the region allocated by
'a'.
To deal with this, we shrink the vm_region struct during the truncation,
lest do_mmap_pgoff() take it as licence to share the full region
automatically without calling the get_unmapped_area() file op again.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:36 +0000 (17:01 -0800)]
nommu: fix race between ramfs truncation and shared mmap
Fix the race between the truncation of a ramfs file and an attempt to make
a shared mmap of region of that file.
The problem is that do_mmap_pgoff() calls f_op->get_unmapped_area() to
verify that the file region is made of contiguous pages and to find its
base address - but there isn't any locking to guarantee this region until
vma_prio_tree_insert() is called by add_vma_to_mm().
Note that moving the functionality into f_op->mmap() doesn't help as that
is also called before vma_prio_tree_insert().
Instead make ramfs_nommu_check_mappings() grab nommu_region_sem whilst it
does its checks. This means that this function will wait whilst mmaps
take place.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:35 +0000 (17:01 -0800)]
nommu: don't need get_unmapped_area() for NOMMU
get_unmapped_area() is unnecessary for NOMMU as no-one calls it.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:34 +0000 (17:01 -0800)]
nommu: remove a superfluous check of vm_region::vm_usage
In split_vma(), there's no need to check if the VMA being split has a
region that's in use by more than one VMA because:
(1) The preceding test prohibits splitting of non-anonymous VMAs and regions
(eg: file or chardev backed VMAs).
(2) Anonymous regions can't be mapped multiple times because there's no handle
by which to refer to the already existing region.
(3) If a VMA has previously been split, then the region backing it has also
been split into two regions, each of usage 1.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:33 +0000 (17:01 -0800)]
nommu: struct vm_region's vm_usage count need not be atomic
The vm_usage count field in struct vm_region does not need to be atomic as
it's only even modified whilst nommu_region_sem is write locked.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:32 +0000 (17:01 -0800)]
nommu: fix SYSV SHM for NOMMU
Commit
c4caa778157dbbf04116f0ac2111e389b5cd7a29 ("file
->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()")
broke SYSV SHM for NOMMU by taking away the pointer to
shm_get_unmapped_area() from shm_file_operations.
Put it back conditionally on CONFIG_MMU=n.
file->f_ops->get_unmapped_area() is used to find out the base address for a
mapping of a mappable chardev device or mappable memory-based file (such as a
ramfs file). It needs to be called prior to file->f_ops->mmap() being called.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wu Fengguang [Sat, 16 Jan 2010 01:01:32 +0000 (17:01 -0800)]
sysdev: fix prototype for memory_sysdev_class show/store functions
The function prototype mismatches in call stack:
[<
ffffffff81494268>] print_block_size+0x58/0x60
[<
ffffffff81487e3f>] sysdev_class_show+0x1f/0x30
[<
ffffffff811d629b>] sysfs_read_file+0xcb/0x1f0
[<
ffffffff81176328>] vfs_read+0xc8/0x180
Due to prototype mismatch, print_block_size() will sprintf() into
*attribute instead of *buf, hence user space will read the initial
zeros from *buf:
$ hexdump /sys/devices/system/memory/block_size_bytes
0000000 0000 0000 0000 0000
0000008
After patch:
cat /sys/devices/system/memory/block_size_bytes
0x8000000
This complements commits
c29af9636 and
4a0b2b4dbe.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wu Fengguang [Sat, 16 Jan 2010 01:01:31 +0000 (17:01 -0800)]
memory-hotplug: add 0x prefix to HEX block_size_bytes
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke Nishimura [Sat, 16 Jan 2010 01:01:30 +0000 (17:01 -0800)]
memcg: ensure list is empty at rmdir
Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on
success. But this doesn't guarantee memcg's LRU is really empty, because
there are some cases in which !PageCgrupUsed pages exist on memcg's LRU.
For example:
- Pages can be uncharged by its owner process while they are on LRU.
- race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common().
So there can be a case in which the usage is zero but some of the LRUs are not empty.
OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with
rmdir, accesses the mem_cgroup, so this access can cause a problem if it
races with rmdir because the mem_cgroup might have been freed by rmdir.
Actually, I saw a bug which seems to be caused by this race.
[
1530745.949906] BUG: unable to handle kernel NULL pointer dereference at
0000000000000230
[
1530745.950651] IP: [<
ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[
1530745.950651] PGD
3863de067 PUD
3862c7067 PMD 0
[
1530745.950651] Oops: 0002 [#1] SMP
[
1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map
[
1530745.950651] CPU 3
[
1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
[
1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G M
2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065]
[
1530745.950651] RIP: 0010:[<
ffffffff810fbc11>] [<
ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[
1530745.950651] RSP: 0018:
ffff8803863ddcb8 EFLAGS:
00010002
[
1530745.950651] RAX:
00000000000001e0 RBX:
ffff8803abc02238 RCX:
00000000000001e0
[
1530745.950651] RDX:
0000000000000000 RSI:
ffff88038611a000 RDI:
ffff8803abc02238
[
1530745.950651] RBP:
ffff8803863ddcc8 R08:
0000000000000002 R09:
ffff8803a04c8643
[
1530745.950651] R10:
0000000000000000 R11:
ffffffff810c7333 R12:
0000000000000000
[
1530745.950651] R13:
ffff880000017f00 R14:
0000000000000092 R15:
ffff8800179d0310
[
1530745.950651] FS:
0000000000000000(0000) GS:
ffff880017800000(0000) knlGS:
0000000000000000
[
1530745.950651] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[
1530745.950651] CR2:
0000000000000230 CR3:
0000000379d87000 CR4:
00000000000006e0
[
1530745.950651] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[
1530745.950651] DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
[
1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo
ffff8803863dc000, task
ffff88038612a8a0)
[
1530745.950651] Stack:
[
1530745.950651]
ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a
[
1530745.950651] <0>
00000000863ddd18 000000000000000c 0000000000000000 0000000000000000
[
1530745.950651] <0>
0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046
[
1530745.950651] Call Trace:
[
1530745.950651] [<
ffffffff810c739a>] release_pages+0x142/0x1e7
[
1530745.950651] [<
ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112
[
1530745.950651] [<
ffffffff810c781e>] pagevec_move_tail+0xfd/0x112
[
1530745.950651] [<
ffffffff810c78a9>] lru_add_drain+0x76/0x94
[
1530745.950651] [<
ffffffff810dba0c>] exit_mmap+0x6e/0x145
[
1530745.950651] [<
ffffffff8103f52d>] mmput+0x5e/0xcf
[
1530745.950651] [<
ffffffff81043ea8>] exit_mm+0x11c/0x129
[
1530745.950651] [<
ffffffff8108fb29>] ? audit_free+0x196/0x1c9
[
1530745.950651] [<
ffffffff81045353>] do_exit+0x1f5/0x6b7
[
1530745.950651] [<
ffffffff8106133f>] ? up_read+0x2b/0x2f
[
1530745.950651] [<
ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67
[
1530745.950651] [<
ffffffff81045898>] do_group_exit+0x83/0xb0
[
1530745.950651] [<
ffffffff810458dc>] sys_exit_group+0x17/0x1b
[
1530745.950651] [<
ffffffff81002c1b>] system_call_fastpath+0x16/0x1b
[
1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b
[
1530745.950651] RIP [<
ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[
1530745.950651] RSP <
ffff8803863ddcb8>
[
1530745.950651] CR2:
0000000000000230
[
1530745.950651] ---[ end trace
c3419c1bb8acc34f ]---
[
1530745.950651] Fixing recursive fault but reboot is needed!
The problem here is pages on LRU may contain pointer to stale memcg. To
make res->usage to be 0, all pages on memcg must be uncharged or moved to
another(parent) memcg. Moved page_cgroup have already removed from
original LRU, but uncharged page_cgroup contains pointer to memcg withou
PCG_USED bit. (This asynchronous LRU work is for improving performance.)
If PCG_USED bit is not set, page_cgroup will never be added to memcg's
LRU. So, about pages not on LRU, they never access stale pointer. Then,
what we have to take care of is page_cgroup _on_ LRU list. This patch
fixes this problem by making mem_cgroup_force_empty() visit all LRUs
before exiting its loop and guarantee there are no pages on its LRU.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Sat, 16 Jan 2010 01:01:26 +0000 (17:01 -0800)]
virtio: fix section mismatch warnings
Fix fixes the following warnings by renaming the driver structures to be
suffixed with _driver.
WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove()
WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove()
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KOSAKI Motohiro [Sat, 16 Jan 2010 01:01:25 +0000 (17:01 -0800)]
vmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimable
Commit
f50de2d3 (vmscan: have kswapd sleep for a short interval and double
check it should be asleep) can cause kswapd to enter an infinite loop if
running on a single-CPU system. If all zones are unreclaimble,
sleeping_prematurely return 1 and kswapd will call balance_pgdat() again.
but it's totally meaningless, balance_pgdat() doesn't anything against
unreclaimable zone!
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reported-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Tested-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David John [Sat, 16 Jan 2010 01:01:23 +0000 (17:01 -0800)]
smp_call_function_any(): pass the node value to cpumask_of_node()
The change in acpi_cpufreq to use smp_call_function_any causes a warning
when it is called since the function erroneously passes the cpu id to
cpumask_of_node rather than the node that the cpu is on. Fix this.
cpumask_of_node(3): node > nr_node_ids(1)
Pid: 1, comm: swapper Not tainted
2.6.33-rc3-00097-g2c1f189 #223
Call Trace:
[<
ffffffff81028bb3>] cpumask_of_node+0x23/0x58
[<
ffffffff81061f51>] smp_call_function_any+0x65/0xfa
[<
ffffffff810160d1>] ? do_drv_read+0x0/0x2f
[<
ffffffff81015fba>] get_cur_val+0xb0/0x102
[<
ffffffff81016080>] get_cur_freq_on_cpu+0x74/0xc5
[<
ffffffff810168a7>] acpi_cpufreq_cpu_init+0x417/0x515
[<
ffffffff81562ce9>] ? __down_write+0xb/0xd
[<
ffffffff8148055e>] cpufreq_add_dev+0x278/0x922
Signed-off-by: David John <davidjon@xenontk.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland Dreier [Sat, 16 Jan 2010 01:01:22 +0000 (17:01 -0800)]
kernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()
Add BUILD_BUG_ON_NOT_POWER_OF_2()
When code relies on a constant being a power of 2:
#define FOO 512 /* must be a power of 2 */
it would be nice to be able to do:
BUILD_BUG_ON(!is_power_of_2(FOO));
However applying an inline function does not result in a compile-time
constant that can be used with BUILD_BUG_ON(), so trying that gives
results in:
error: bit-field '<anonymous>' width not an integer constant
As suggested by akpm, rather than monkeying around with is_power_of_2()
and risking gcc warts about constant expressions, just create a macro
BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: David Dillow <dave@thedillows.org>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kazuhisa Ichikawa [Sat, 16 Jan 2010 01:01:20 +0000 (17:01 -0800)]
mm/page_alloc: fix the range check for backward merging
The current check for 'backward merging' within add_active_range() does
not seem correct. start_pfn must be compared against
early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether
the new region is backward-mergeable with the existing range.
Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 16 Jan 2010 01:01:17 +0000 (17:01 -0800)]
kfifo: document everywhere that size has to be power of two
On my first try using them I missed that the fifos need to be power of
two, resulting in a runtime bug. Document that requirement everywhere
(and fix one grammar bug)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 16 Jan 2010 01:01:17 +0000 (17:01 -0800)]
kfifo: add kfifo_initialized
Simple inline that checks if kfifo_init() has been executed on a fifo.
This is useful for walking all per CPU fifos, when some of them might not
have been brought up yet.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 16 Jan 2010 01:01:16 +0000 (17:01 -0800)]
kfifo: add kfifo_out_peek
In some upcoming code it's useful to peek into a FIFO without permanentely
removing data. This patch implements a new kfifo_out_peek() to do this.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 16 Jan 2010 01:01:15 +0000 (17:01 -0800)]
kfifo: sanitize *_user error handling
Right now for kfifo_*_user it's not easily possible to distingush between
a user copy failing and the FIFO not containing enough data. The problem
is that both conditions are multiplexed into the same return code.
Avoid this by moving the "copy length" into a separate output parameter
and only return 0/-EFAULT in the main return value.
I didn't fully adapt the weird "record" variants, those seem
to be unused anyways and were rather messy (should they be just removed?)
I would appreciate some double checking if I did all the conversions
correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 16 Jan 2010 01:01:12 +0000 (17:01 -0800)]
kfifo: use void * pointers for user buffers
The pointers to user buffers are currently unsigned char *, which requires
a lot of casting in the caller for any non-char typed buffers. Use void *
instead.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 16 Jan 2010 01:01:11 +0000 (17:01 -0800)]
tty.h: make tty_port_get() static inline
I get a few dozen of these warnings when using
gcc (GCC) 4.4.1
20090725 (Red Hat 4.4.1-2):
In file included from mmotm-2010-0113-1217/init/do_mounts.c:5:
mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get':
mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static
so make the function static inline.
[akpm@linux-foundation.org: may as well convert tty_port_users() also]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tamas Vincze [Sat, 16 Jan 2010 01:01:10 +0000 (17:01 -0800)]
edac: i5000_edac critical fix panic out of bounds
EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4)
Kernel panic - not syncing: EDAC MC0: Uncorrected Error (XEN) Domain 0 crashed: 'noreboot' set - not rebooting.
This happens because FERR_NF_FBD bit 28 is not updated on i5000. Due to
that, both bits 28 and 29 may be equal to one, returning channel = 3. As
this value is invalid, EDAC core generates the panic.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568
Signed-off-by: Tamas Vincze <tom@vincze.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
john stultz [Sat, 16 Jan 2010 01:01:09 +0000 (17:01 -0800)]
m68knommu: fix invalid flags on coldfire pit clocksource
The m68knommu coldfire pit clocksource looks like it was incorrectly
marked as a continuous clocksource. Running with it marked as a
continuous clocksource could cause hangs when the system switches to
highres mode or enables nohz.
This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit
clocksource. This will disallow systems using this clocksource from
entering oneshot mode (disabling highres timers and nohz).
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Cc: Steven King <sfking@fdwdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ping [Sat, 16 Jan 2010 01:01:07 +0000 (17:01 -0800)]
serial/8250_pnp: add a new Fujitsu Wacom Tablet PC device
This is a new two finger touch Fujitsu Wacom Tablet PC.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hui Zhu [Sat, 16 Jan 2010 01:01:07 +0000 (17:01 -0800)]
markup_oops.pl: fix error with x86
When I try to use markup_oops.pl in x86, I always get:
cat 1 | perl markup_oops.pl ./vmlinux
objdump: --start-address: bad number: NaN
No matching code found
This is because in line:
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
$func_offset will get a number like "0x2"
But in follow code:
my $decodestart = Math::BigInt->from_hex("0x$target") -
Math::BigInt->from_hex("0x$func_offset");
It add other ox to ox2. Then this value will be set to NaN.
So I made a small patch to fix it.
Signed-off-by: Hui Zhu <teawater@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log