libceph: implement CEPHX_V2 calculation mode

commit cc255c76c70f7a87d97939621eae04b600d9f4a1 upstream.

Derive the signature from the entire buffer (both AES cipher blocks)
instead of using just the first half of the first block, leaving out
data_crc entirely.

This addresses CVE-2018-1129.

Link: http://tracker.ceph.com/issues/24837
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
[bwh: Backported to 4.9:
 - Define and test the feature bit in the old way
 - Don't change any other feature bits in ceph_features.h]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: add authorizer challenge

commit 6daca13d2e72bedaaacfc08f873114c9307d5aea upstream.

When a client authenticates with a service, an authorizer is sent with
a nonce to the service (ceph_x_authorize_[ab]) and the service responds
with a mutation of that nonce (ceph_x_authorize_reply).  This lets the
client verify the service is who it says it is but it doesn't protect
against a replay: someone can trivially capture the exchange and reuse
the same authorizer to authenticate themselves.

Allow the service to reject an initial authorizer with a random
challenge (ceph_x_authorize_challenge).  The client then has to respond
with an updated authorizer proving they are able to decrypt the
service's challenge and that the new authorizer was produced for this
specific connection instance.

The accepting side requires this challenge and response unconditionally
if the client side advertises they have CEPHX_V2 feature bit.

This addresses CVE-2018-1128.

Link: http://tracker.ceph.com/issues/24836
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: factor out encrypt_authorizer()

commit 149cac4a50b0b4081b38b2f38de6ef71c27eaa85 upstream.

Will be used for encrypting both the initial and updated authorizers.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: factor out __ceph_x_decrypt()

commit c571fe24d243bfe7017f0e67fe800b3cc2a1d1f7 upstream.

Will be used for decrypting the server challenge which is only preceded
by ceph_x_encrypt_header.

Drop struct_v check to allow for extending ceph_x_encrypt_header in the
future.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: factor out __prepare_write_connect()

commit c0f56b483aa09c99bfe97409a43ad786f33b8a5a upstream.

Will be used for sending ceph_msg_connect with an updated authorizer,
after the server challenges the initial authorizer.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: store ceph_auth_handshake pointer in ceph_connection

commit 262614c4294d33b1f19e0d18c0091d9c329b544a upstream.

We already copy authorizer_reply_buf and authorizer_reply_buf_len into
ceph_connection.  Factoring out __prepare_write_connect() requires two
more: authorizer_buf and authorizer_buf_len.  Store the pointer to the
handshake in con->auth rather than piling on.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: no need to drop con->mutex for ->get_authorizer()

commit b3bbd3f2ab19c8ca319003b4b51ce4c4ca74da06 upstream.

->get_authorizer(), ->verify_authorizer_reply(), ->sign_message() and
->check_message_signature() shouldn't be doing anything with or on the
connection (like closing it or sending messages).

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: drop len argument of *verify_authorizer_reply()

commit 0dde584882ade13dc9708d611fbf69b0ae8a9e48 upstream.

The length of the reply is protocol-dependent - for cephx it's
ceph_x_authorize_reply.  Nothing sensible can be passed from the
messenger layer anyway.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: use destination length for copy string

commit 29e270fc32192e7729057963ae7120663856c93e upstream.

Got below warning with gcc 8.2 compiler.

net/tipc/topsrv.c: In function ‘tipc_topsrv_start’:
net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
  strncpy(srv->name, name, strlen(name) + 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/topsrv.c:660:27: note: length computed here
  strncpy(srv->name, name, strlen(name) + 1);
                           ^~~~~~~~~~~~
So change it to correct length and use strscpy.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qed: use correct strncpy() size

commit 11f711081af0eb54190dc0de96ba4a9cd494666b upstream.

passing the strlen() of the source string as the destination
length is pointless, and gcc-8 now warns about it:

drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

This changes qed_grc_dump_big_ram() to instead uses the length of
the destination buffer, and use strscpy() to guarantee nul-termination.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: dummy: fix nonsensical comparisons

commit 7661ca09b2ff98f48693f431bb01fed62830e433 upstream.

gcc-8 points out two comparisons that are clearly bogus
and almost certainly not what the author intended to write:

drivers/usb/gadget/udc/dummy_hcd.c: In function 'set_link_state_by_speed':
drivers/usb/gadget/udc/dummy_hcd.c:379:31: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
         USB_PORT_STAT_ENABLE) == 1 &&
                               ^~
drivers/usb/gadget/udc/dummy_hcd.c:381:25: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
      USB_SS_PORT_LS_U0) == 1 &&
                         ^~

I looked at the code for a bit and came up with a change that makes
it look like what the author probably meant here. This makes it
look reasonable to me and to gcc, shutting up the warning.

It does of course change behavior as the two conditions are actually
evaluated rather than being hardcoded to false, and I have made no
attempt at verifying that the changed logic makes sense in the context
of a USB HCD, so that part needs to be reviewed carefully.

Fixes: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support")
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Cc: Felipe Balbi <balbi@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: cleancache: fix corruption on missed inode invalidation

commit 6ff38bd40230af35e446239396e5fc8ebd6a5248 upstream.

If all pages are deleted from the mapping by memory reclaim and also
moved to the cleancache:

__delete_from_page_cache
  (no shadow case)
  unaccount_page_cache_page
    cleancache_put_page
  page_cache_delete
    mapping->nrpages -= nr
    (nrpages becomes 0)

We don't clean the cleancache for an inode after final file truncation
(removal).

truncate_inode_pages_final
  check (nrpages || nrexceptional) is false
    no truncate_inode_pages
      no cleancache_invalidate_inode(mapping)

These way when reading the new file created with same inode we may get
these trash leftover pages from cleancache and see wrong data instead of
the contents of the new file.

Fix it by always doing truncate_inode_pages which is already ready for
nrpages == 0 && nrexceptional == 0 case and just invalidates inode.

[akpm@linux-foundation.org: add comment, per Jan]
Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com
Fixes: commit 91b0abe36a7b ("mm + fs: store shadow entries in page cache")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: remove remaining WARN_ON() in <linux/reset.h>

commit bb6c7768385b200063a14d6615cc1246c3d00760 upstream.

Commit bb475230b8e5 ("reset: make optional functions really optional")
gave a new meaning to _get_optional variants.

The differentiation by WARN_ON() is not needed any more.  We already
have inconsistency about this; (devm_)reset_control_get_exclusive()
has WARN_ON() check, but of_reset_control_get_exclusive() does not.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: make device_reset_optional() really optional

commit 1554bbd4ad401b7f0f916c0891874111c10befe5 upstream.

Commit bb475230b8e5 ("reset: make optional functions really optional")
converted *_get_optional* functions, but device_reset_optional() was
left behind.  Convert it in the same way.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: add exported __reset_control_get, return NULL if optional

commit 62e24c5775ecb387a3eb33701378ccfa6dbc98ee upstream.

Rename the internal __reset_control_get/put functions to
__reset_control_get/put_internal and add an exported
__reset_control_get equivalent to __of_reset_control_get
that takes a struct device parameter.
This avoids the confusing call to __of_reset_control_get in
the non-DT case and fixes the devm_reset_control_get_optional
function to return NULL if RESET_CONTROLLER is enabled but
dev->of_node == NULL.

Fixes: bb475230b8e5 ("reset: make optional functions really optional")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: fix optional reset_control_get stubs to return NULL

commit 0ca10b60ceeb5372da01798ca68c116ae45a6eb6 upstream.

When RESET_CONTROLLER is not enabled, the optional reset_control_get
stubs should now also return NULL.

Since it is now valid for reset_control_assert/deassert/reset/status/put
to be called unconditionally, with NULL as an argument for optional
resets, the stubs are not allowed to warn anymore.

Fixes: bb475230b8e5 ("reset: make optional functions really optional")
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: core: fix reset_control_put

commit 4891486fb2c80eaf3bb0f9eb065d15ecd357702f upstream.

Commit "reset: make optional functions really optional" missed to
adjust one check in reset_control_put, causing a NULL pointer
access for optional resets.

Fixes: bb475230b8e5 "reset: make optional functions really optional"
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: make optional functions really optional

commit bb475230b8e59a547ab66ac3b02572df21a580e9 upstream.

The *_get_optional_* functions weren't really optional so this patch
makes them really optional.

These *_get_optional_* functions will now return NULL instead of an error
if no matching reset phandle is found in the DT, and all the
reset_control_* functions now accept NULL rstc pointers.

Signed-off-by: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Allow mounting volumes with incorrect identification strings

commit b54e41f5efcb4316b2f30b30c2535cc194270373 upstream.

Commit c26f6c615788 ("udf: Fix conversion of 'dstring' fields to UTF8")
started to be more strict when checking whether converted strings are
properly formatted. Sudip reports that there are DVDs where the volume
identification string is actually too long - UDF reports:

[  632.309320] UDF-fs: incorrect dstring lengths (32/32)

during mount and fails the mount. This is mostly harmless failure as we
don't need volume identification (and even less volume set
identification) for anything. So just truncate the volume identification
string if it is too long and replace it with 'Invalid' if we just cannot
convert it for other reasons. This keeps slightly incorrect media still
mountable.

CC: stable@vger.kernel.org
Fixes: c26f6c615788 ("udf: Fix conversion of 'dstring' fields to UTF8")
Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: [devboards] Add support of NFSv3 ACL

commit 6b04114f6fae5e84d33404c2970b1949c032546e upstream.

By default NFSv3 doesn't support ACL (Access Control Lists)
which might be quite convenient to have so that
mounted NFS behaves exactly as any other local file-system.

In particular missing support of ACL makes umask useless.
This among other thigs fixes Glibc's "nptl/tst-umask1".

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: stable@vger.kernel.org #4.14+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: change defconfig defaults to ARCv2

commit b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream.

Change the default defconfig (used with 'make defconfig') to the ARCv2
nsim_hs_defconfig, and also switch the default Kconfig ISA selection to
ARCv2.

This allows several default defconfigs (e.g. make defconfig, make
allnoconfig, make tinyconfig) to all work with ARCv2 by default.

Note since we change default architecture from ARCompact to ARCv2
it's required to explicitly mention architecture type in ARCompact
defconfigs otherwise ARCv2 will be implied and binaries will be
generated for ARCv2.

Cc: <stable@vger.kernel.org> # 4.4.x
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix use-after-free when dumping free space

commit 9084cb6a24bf5838a665af92ded1af8363f9e563 upstream.

We were iterating a block group's free space cache rbtree without locking
first the lock that protects it (the free_space_ctl->free_space_offset
rbtree is protected by the free_space_ctl->tree_lock spinlock).

KASAN reported an use-after-free problem when iterating such a rbtree due
to a concurrent rbtree delete:

[ 9520.359168] ==================================================================
[ 9520.359656] BUG: KASAN: use-after-free in rb_next+0x13/0x90
[ 9520.359949] Read of size 8 at addr ffff8800b7ada500 by task btrfs-transacti/1721
[ 9520.360357]
[ 9520.360530] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G             L    4.19.0-rc8-nbor #555
[ 9520.360990] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.362682] Call Trace:
[ 9520.362887]  dump_stack+0xa4/0xf5
[ 9520.363146]  print_address_description+0x78/0x280
[ 9520.363412]  kasan_report+0x263/0x390
[ 9520.363650]  ? rb_next+0x13/0x90
[ 9520.363873]  __asan_load8+0x54/0x90
[ 9520.364102]  rb_next+0x13/0x90
[ 9520.364380]  btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.364697]  dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.364997]  btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.365310]  __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.365646]  ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.365923]  ? _raw_spin_unlock+0x27/0x40
[ 9520.366204]  ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.366549]  btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.366880]  cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.367220]  ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.367518]  ? lock_downgrade+0x2f0/0x2f0
[ 9520.367799]  ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.368104]  ? kasan_check_read+0x11/0x20
[ 9520.368349]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.368638]  btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.368978]  ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.369282]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.369534]  ? _raw_spin_unlock+0x27/0x40
[ 9520.369811]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.370137]  commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.370560]  ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.370926]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.371285]  btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.371612]  ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.371943]  ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.372257]  transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.372537]  kthread+0x1d2/0x1f0
[ 9520.372793]  ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.373090]  ? kthread_park+0xb0/0xb0
[ 9520.373329]  ret_from_fork+0x3a/0x50
[ 9520.373567]
[ 9520.373738] Allocated by task 1804:
[ 9520.373974]  kasan_kmalloc+0xff/0x180
[ 9520.374208]  kasan_slab_alloc+0x11/0x20
[ 9520.374447]  kmem_cache_alloc+0xfc/0x2d0
[ 9520.374731]  __btrfs_add_free_space+0x40/0x580 [btrfs]
[ 9520.375044]  unpin_extent_range+0x4f7/0x7a0 [btrfs]
[ 9520.375383]  btrfs_finish_extent_commit+0x15f/0x4d0 [btrfs]
[ 9520.375707]  btrfs_commit_transaction+0xb06/0x10e0 [btrfs]
[ 9520.376027]  btrfs_alloc_data_chunk_ondemand+0x237/0x5c0 [btrfs]
[ 9520.376365]  btrfs_check_data_free_space+0x81/0xd0 [btrfs]
[ 9520.376689]  btrfs_delalloc_reserve_space+0x25/0x80 [btrfs]
[ 9520.377018]  btrfs_direct_IO+0x42e/0x6d0 [btrfs]
[ 9520.377284]  generic_file_direct_write+0x11e/0x220
[ 9520.377587]  btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.377875]  aio_write+0x25c/0x360
[ 9520.378106]  io_submit_one+0xaa0/0xdc0
[ 9520.378343]  __se_sys_io_submit+0xfa/0x2f0
[ 9520.378589]  __x64_sys_io_submit+0x43/0x50
[ 9520.378840]  do_syscall_64+0x7d/0x240
[ 9520.379081]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.379387]
[ 9520.379557] Freed by task 1802:
[ 9520.379782]  __kasan_slab_free+0x173/0x260
[ 9520.380028]  kasan_slab_free+0xe/0x10
[ 9520.380262]  kmem_cache_free+0xc1/0x2c0
[ 9520.380544]  btrfs_find_space_for_alloc+0x4cd/0x4e0 [btrfs]
[ 9520.380866]  find_free_extent+0xa99/0x17e0 [btrfs]
[ 9520.381166]  btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
[ 9520.381474]  btrfs_get_blocks_direct+0x60b/0xbd0 [btrfs]
[ 9520.381761]  __blockdev_direct_IO+0x10ee/0x58a1
[ 9520.382059]  btrfs_direct_IO+0x25a/0x6d0 [btrfs]
[ 9520.382321]  generic_file_direct_write+0x11e/0x220
[ 9520.382623]  btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.382904]  aio_write+0x25c/0x360
[ 9520.383172]  io_submit_one+0xaa0/0xdc0
[ 9520.383416]  __se_sys_io_submit+0xfa/0x2f0
[ 9520.383678]  __x64_sys_io_submit+0x43/0x50
[ 9520.383927]  do_syscall_64+0x7d/0x240
[ 9520.384165]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.384439]
[ 9520.384610] The buggy address belongs to the object at ffff8800b7ada500
                which belongs to the cache btrfs_free_space of size 72
[ 9520.385175] The buggy address is located 0 bytes inside of
                72-byte region [ffff8800b7ada500, ffff8800b7ada548)
[ 9520.385691] The buggy address belongs to the page:
[ 9520.385957] page:ffffea0002deb680 count:1 mapcount:0 mapping:ffff880108a1d700 index:0x0 compound_mapcount: 0
[ 9520.388030] flags: 0x8100(slab|head)
[ 9520.388281] raw: 0000000000008100 ffffea0002deb608 ffffea0002728808 ffff880108a1d700
[ 9520.388722] raw: 0000000000000000 0000000000130013 00000001ffffffff 0000000000000000
[ 9520.389169] page dumped because: kasan: bad access detected
[ 9520.389473]
[ 9520.389658] Memory state around the buggy address:
[ 9520.389943]  ffff8800b7ada400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390368]  ffff8800b7ada480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390796] >ffff8800b7ada500: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc
[ 9520.391223]                    ^
[ 9520.391461]  ffff8800b7ada580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.391885]  ffff8800b7ada600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.392313] ==================================================================
[ 9520.392772] BTRFS critical (device vdc): entry offset 2258497536, bytes 131072, bitmap no
[ 9520.393247] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011
[ 9520.393705] PGD 800000010dbab067 P4D 800000010dbab067 PUD 107551067 PMD 0
[ 9520.394059] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 9520.394378] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G    B        L    4.19.0-rc8-nbor #555
[ 9520.394858] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.395350] RIP: 0010:rb_next+0x3c/0x90
[ 9520.396461] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.396762] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.397115] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.397468] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.397821] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.398188] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.398555] FS:  0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.399007] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.399335] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.399679] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.400023] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.400400] Call Trace:
[ 9520.400648]  btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.400974]  dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.401287]  btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.401609]  __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.401952]  ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.402232]  ? _raw_spin_unlock+0x27/0x40
[ 9520.402522]  ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.402882]  btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.403261]  cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.403570]  ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.403871]  ? lock_downgrade+0x2f0/0x2f0
[ 9520.404161]  ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.404481]  ? kasan_check_read+0x11/0x20
[ 9520.404732]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405026]  btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.405375]  ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.405694]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405958]  ? _raw_spin_unlock+0x27/0x40
[ 9520.406243]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.406574]  commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.406899]  ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.407253]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.407589]  btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.407925]  ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.408262]  ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.408582]  transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.408870]  kthread+0x1d2/0x1f0
[ 9520.409138]  ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.409440]  ? kthread_park+0xb0/0xb0
[ 9520.409682]  ret_from_fork+0x3a/0x50
[ 9520.410508] Dumping ftrace buffer:
[ 9520.410764]    (ftrace buffer empty)
[ 9520.411007] CR2: 0000000000000011
[ 9520.411297] ---[ end trace 01a0863445cf360a ]---
[ 9520.411568] RIP: 0010:rb_next+0x3c/0x90
[ 9520.412644] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.412932] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.413274] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.413616] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.414007] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.414349] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.416074] FS:  0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.416536] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.416848] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.418477] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.418846] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.419204] Kernel panic - not syncing: Fatal exception
[ 9520.419666] Dumping ftrace buffer:
[ 9520.419930]    (ftrace buffer empty)
[ 9520.420168] Kernel Offset: disabled
[ 9520.420406] ---[ end Kernel panic - not syncing: Fatal exception ]---

Fix this by acquiring the respective lock before iterating the rbtree.

Reported-by: Nikolay Borisov <nborisov@suse.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Always try all copies when reading extent buffers

commit f8397d69daef06d358430d3054662fb597e37c00 upstream.

When a metadata read is served the endio routine btree_readpage_end_io_hook
is called which eventually runs the tree-checker. If tree-checker fails
to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This
leads to btree_read_extent_buffer_pages wrongly assuming that all
available copies of this extent buffer are wrong and failing prematurely.
Fix this modify btree_read_extent_buffer_pages to read all copies of
the data.

This failure was exhibitted in xfstests btrfs/124 which would
spuriously fail its balance operations. The reason was that when balance
was run following re-introduction of the missing raid1 disk
__btrfs_map_block would map the read request to stripe 0, which
corresponded to devid 2 (the disk which is being removed in the test):

    item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 3553624064) itemoff 15975 itemsize 112
length 1073741824 owner 2 stripe_len 65536 type DATA|RAID1
io_align 65536 io_width 65536 sector_size 4096
num_stripes 2 sub_stripes 1
stripe 0 devid 2 offset 2156920832
dev_uuid 8466c350-ed0c-4c3b-b17d-6379b445d5c8
stripe 1 devid 1 offset 3553624064
dev_uuid 1265d8db-5596-477e-af03-df08eb38d2ca

This caused read requests for a checksum item that to be routed to the
stale disk which triggered the aforementioned logic involving
EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of
the balance operation.

Fixes: a826d6dcb32d ("Btrfs: check items for correctness as we search")
CC: stable@vger.kernel.org # 4.4+
Suggested-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add support for ELAN0621 touchpad

commit bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream.

Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.

Signed-off-by: Adam Wong <adam@adamwong.me>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR

commit ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream.

Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.

Signed-off-by: Noah Westervelt <nwestervelt@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0620 to the ACPI table

commit 3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream.

Add ELAN0620 to the ACPI table to support the elan touchpad in
the Lenovo IdeaPad 130-15IKB.

Signed-off-by: Patrick Gaskin <patrick@pgaskin.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: matrix_keypad - check for errors from of_get_named_gpio()

commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream.

"of_get_named_gpio()" returns a negative error value if it fails
and drivers should check for this. This missing check was now
added to the matrix_keypad driver.

In my case "of_get_named_gpio()" returned -EPROBE_DEFER because
the referenced GPIOs belong to an I/O expander, which was not yet
probed at the point in time when the matrix_keypad driver was
loading. Because the driver did not check for errors from the
"of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER"
is actually a GPIO number and continued as usual, which led to further
errors like this later on:

WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114
gpio_to_desc+0xc8/0xd0
invalid GPIO -517

Note that the "GPIO number" -517 in the error message above is
actually "-EPROBE_DEFER".

As part of the patch a misleading error message "no platform data defined"
was also removed. This does not lead to information loss because the other
error paths in matrix_keypad_parse_dt() already print an error.

Signed-off-by: Christian Hoff <christian_hoff@gmx.net>
Suggested-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - quirk all PDP Xbox One gamepads

commit a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream.

Since we continue to find tons of new variants [0,1,2,3,4,5,6] that
need the PDP quirk, let's just quirk all devices from PDP.

[0]: https://github.com/paroj/xpad/pull/104
[1]: https://github.com/paroj/xpad/pull/105
[2]: https://github.com/paroj/xpad/pull/108
[3]: https://github.com/paroj/xpad/pull/109
[4]: https://github.com/paroj/xpad/pull/112
[5]: https://github.com/paroj/xpad/pull/115
[6]: https://github.com/paroj/xpad/pull/116

Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek: fix OF sibling-node lookup

commit ceff2f4dcd44abf35864d9a99f85ac619e89a01d upstream.

Use the new of_get_compatible_child() helper to lookup the sibling
instead of using of_find_compatible_node(), which searches the entire
tree from a given start node and thus can return an unrelated (i.e.
non-sibling) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).

While at it, also fix the related cec-node reference leak.

Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Cc: stable <stable@vger.kernel.org> # 4.8
Cc: Junzhi Zhao <junzhi.zhao@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[ johan: backport to 4.9 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svm: Add mutex_lock to protect apic_access_page_done on AMD systems

commit 30510387a5e45bfcf8190e03ec7aa15b295828e2 upstream.

There is a race condition when accessing kvm->arch.apic_access_page_done.
Due to it, x86_set_memory_region will fail when creating the second vcpu
for a svm guest.

Add a mutex_lock to serialize the accesses to apic_access_page_done.
This lock is also used by vmx for the same purpose.

Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Amadeusz Juskowiak <ajusk@amazon.de>
Signed-off-by: Julian Stecklina <jsteckli@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix proc->files use-after-free

commit 7f3dc0088b98533f17128058fac73cd8b2752ef1 upstream.

proc->files cleanup is initiated by binder_vma_close. Therefore
a reference on the binder_proc is not enough to prevent the
files_struct from being released while the binder_proc still has
a reference. This can lead to an attempt to dereference the
stale pointer obtained from proc->files prior to proc->files
cleanup. This has been seen once in task_get_unused_fd_flags()
when __alloc_fd() is called with a stale "files".

The fix is to protect proc->files with a mutex to prevent cleanup
while in use.

Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Fix warning with module build

commit 1cd25cbb2fedbc777f3a8c3cb1ba69b645aeaa64 upstream.

After 2dd453168643 ("kgdboc: Fix restrict error"), kgdboc_option_setup is
now only used when built in, resulting in a warning when compiled as a
module:

drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function]
 static int kgdboc_option_setup(char *opt)
            ^~~~~~~~~~~~~~~~~~~

Move the function under the appropriate ifdef for builtin only.

Fixes: 2dd453168643 ("kgdboc: Fix restrict error")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Fix restrict error

commit 2dd453168643d9475028cd867c57e65956a0f7f9 upstream.

There's an error when compiled with restrict:

drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’:
drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same
as destination [-Werror=restrict]
  strcpy(config, opt);
  ^~~~~~~~~~~~~~~~~~~

As the error implies, this is from trying to use config as both source and
destination. Drop the call to the function where config is the argument
since nothing else happens in the function.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: csiostor: Avoid content leaks and casts

commit 42c335f7e67029d2e01711f2f2bc6252277c8993 upstream.

When copying attributes, the len argument was padded out and the
resulting memcpy() would copy beyond the end of the source buffer.
Avoid this, and use size_t for val_len to avoid all the casts.
Similarly, avoid source buffer casts and use void *.

Additionally enforces val_len can be represented by u16 and that the DMA
buffer was not overflowed. Fixes the size of mfa, which is not
FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN (but it will be padded up to 4). This
was noticed by the future CONFIG_FORTIFY_SOURCE checks.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: trident: Suppress gcc string warning

commit d6b340d7cb33c816ef4abe8143764ec5ab14a5cc upstream.

The meddlesome gcc warns about the possible shortname string in
trident driver code:
  sound/pci/trident/trident.c: In function ‘snd_trident_probe’:
  sound/pci/trident/trident.c:126:2: warning: ‘strcat’ accessing 17 or more bytes at offsets 36 and 20 may overlap 1 byte at offset 36 [-Wrestrict]
  strcat(card->shortname, card->driver);

It happens since gcc calculates the possible string size from
card->driver, but this can't be true since we did set the string just
before that, and they are much shorter.

For shutting it up, use the exactly same string set to card->driver
for strcat() to card->shortname, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_devinfo: cleanly zero-pad devinfo strings

commit 81df022b688d43d2a3667518b2f755d384397910 upstream.

Cleanly fill memory for "vendor" and "model" with 0-bytes for the
"compatible" case rather than adding only a single 0 byte.  This
simplifies the devinfo code a a bit, and avoids mistakes in other places
of the code (not in current upstream, but we had one such mistake in the
SUSE kernel).

[mkp: applied by hand and added braces]

Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: set is_master to 0 upon drm_new_set_master() failure

commit 23a336b34258aba3b50ea6863cca4e81b5ef6384 upstream.

When drm_new_set_master() fails, set is_master to 0, to prevent a
possible NULL pointer deref.

Here is a problematic flow: we check is_master in drm_is_current_master(),
then proceed to call drm_lease_owner() passing master. If we do not restore
is_master status when drm_new_set_master() fails, we may have a situation
in which is_master will be 1 and master itself, NULL, leading to the deref
of a NULL pointer in drm_lease_owner().

This fixes the following OOPS, observed on an ArchLinux running a 4.19.2
kernel:

[   97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[   97.807224] PGD 0 P4D 0
[   97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI
[   97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P           OE     4.19.2-arch1-1-ARCH #1
[   97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018
[   97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[   97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[   97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[   97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[   97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[   97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[   97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[   97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[   97.807224] FS:  00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[   97.807224] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0
[   97.807224] Call Trace:
[   97.807224]  drm_is_current_master+0x1a/0x30 [drm]
[   97.807224]  drm_master_release+0x3e/0x130 [drm]
[   97.807224]  drm_file_free.part.0+0x2be/0x2d0 [drm]
[   97.807224]  drm_open+0x1ba/0x1e0 [drm]
[   97.807224]  drm_stub_open+0xaf/0xe0 [drm]
[   97.807224]  chrdev_open+0xa3/0x1b0
[   97.807224]  ? cdev_put.part.0+0x20/0x20
[   97.807224]  do_dentry_open+0x132/0x340
[   97.807224]  path_openat+0x2d1/0x14e0
[   97.807224]  ? mem_cgroup_commit_charge+0x7a/0x520
[   97.807224]  do_filp_open+0x93/0x100
[   97.807224]  ? __check_object_size+0x102/0x189
[   97.807224]  ? _raw_spin_unlock+0x16/0x30
[   97.807224]  do_sys_open+0x186/0x210
[   97.807224]  do_syscall_64+0x5b/0x170
[   97.807224]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   97.807224] RIP: 0033:0x7f4147b07976
[   97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44
[   97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[   97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976
[   97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c
[   98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000
[   98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024
[   98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012
[   98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid
[   98.040039]  dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler
[   98.040039] CR2: 0000000000000080
[   98.040039] ---[ end trace 3b65093b6fe62b2f ]---
[   98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[   98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[   98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[   98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[   98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[   98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[   98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[   98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[   98.040039] FS:  00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[   98.040039] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0

Signed-off-by: Sergio Correia <sergio@correia.cc>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.cc
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fix incorrect free on ioregs

commit dc25ab067645eabd037f1a23d49a666f9e0b8c68 upstream.

If the platform has no IO space, ioregs is placed next to the already
allocated regs. In this case, it should not be separately freed.

This prevents a kernel warning from __vunmap "Trying to vfree()
nonexistent vm area" when unloading the driver.

Fixes: 0dd68309b9c5 ("drm/ast: Try to use MMIO registers when PIO isn't supported")

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Avoid load failure due to unknown link width

commit db7a691a1551a748cb92d9c89c6b190ea87e28d5 upstream.

If the firmware reports a connection width that is not 1x, 4x, 8x or 12x
it causes the driver to fail during initialization.

To prevent this failure every time a new width is introduced to the RDMA
stack, we will set a default 4x width for these widths which ar unknown to
the driver.

This is needed to allow to run old kernels with new firmware.

Cc: <stable@vger.kernel.org> # 4.1
Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: fix mips_get_syscall_arg o32 check

commit c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream.

When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.

This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.

Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: ralink: Fix mt7620 nd_sd pinmux

commit 7d35baa4e9ec4b717bc0e58a39cdb6a1c50f5465 upstream.

In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are
configured as GPIOs. If they are blocked by the sd function, they can't
be used as GPIOs.

Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Patchwork: https://patchwork.linux-mips.org/patch/21220/
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uprobes: Fix handle_swbp() vs. unregister() + register() race once more

commit 09d3f015d1e1b4fee7e9bbdcf54201d239393391 upstream.

Commit:

  142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")

added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb()
memory barriers, to ensure that handle_swbp() uses fully-initialized
uprobes only.

However, the smp_rmb() is mis-placed: this barrier should be placed
after handle_swbp() has tested for the flag, thus guaranteeing that
(program-order) subsequent loads from the uprobe can see the initial
stores performed by prepare_uprobe().

Move the smp_rmb() accordingly.  Also amend the comments associated
to the two memory barriers to indicate their actual locations.

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org
Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iser: set sector for ambiguous mr status errors

commit 24c3456c8d5ee6fc1933ca40f7b4406130682668 upstream.

If for some reason we failed to query the mr status, we need to make sure
to provide sufficient information for an ambiguous error (guard error on
sector 0).

Fixes: 0a7a08ad6f5f ("IB/iser: Implement check_protection")
Cc: <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/power/64: Use char arrays for asm function names

commit c0944883c97c0ddc71da67cc731590a7c878a1a2 upstream.

This switches the hibernate_64.S function names into character arrays
to match other areas of the kernel where this is done (e.g., linker
scripts). Specifically this fixes a compile-time error noticed by the
future CONFIG_FORTIFY_SOURCE routines that complained about PAGE_SIZE
being copied out of the "single byte" core_restore_code variable.

Additionally drops the "acpi_save_state_mem" exern which does not
appear to be used anywhere else in the kernel.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: use memmove instead of overlapping memcpy

commit 2cf2f0d5b91fd1b06a6ae260462fc7945ea84add upstream.

gcc discovered that the memcpy() arguments in kdbnearsym() overlap, so
we should really use memmove(), which is defined to handle that correctly:

In function 'memcpy',
    inlined from 'kdbnearsym' at /git/arm-soc/kernel/debug/kdb/kdb_support.c:132:4:
/git/arm-soc/include/linux/string.h:353:9: error: '__builtin_memcpy' accessing 792 bytes at offsets 0 and 8 overlaps 784 bytes at offset 8 [-Werror=restrict]
  return __builtin_memcpy(p, q, size);

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: fix gcc-8 logic error warning

commit 58930cced012adb01bc78b3687049b17ef44d0a3 upstream.

As gcc-8 points out, the bit mask check makes no sense here:

drivers/staging/rts5208/sd.c: In function 'ext_sd_send_cmd_get_rsp':
drivers/staging/rts5208/sd.c:4130:25: error: bitwise comparison always evaluates to true [-Werror=tautological-compare]

However, the code is even more bogus, as we have already
checked for the SD_RSP_TYPE_R0 case earlier in the function
and returned success. As seen in the mmc/sd driver core,
SD_RSP_TYPE_R0 means "no response" anyway, so checking for
a particular response would not help either.

This just removes the nonsensical code to get rid of the
warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bfa: convert to strlcpy/strlcat

commit 8c5a50e8e7ad812a62f7ccf28d9a5e74fddf3000 upstream.

The bfa driver has a number of real issues with string termination
that gcc-8 now points out:

drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr':
drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response':
drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build':
drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build':
drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]

In most cases, this can be addressed by correctly calling strlcpy and
strlcat instead of strncpy/strncat, with the size of the destination
buffer as the last argument.

For consistency, I'm changing the other callers of strncpy() in this
driver the same way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: gma500: fix logic error

commit 67a3b63a54cbe18944191f43d644686731cf30c7 upstream.

gcc-8 points out a condition that almost certainly doesn't
do what the author had in mind:

drivers/gpu/drm/gma500/mdfld_intel_display.c: In function 'mdfldWaitForPipeEnable':
drivers/gpu/drm/gma500/mdfld_intel_display.c:102:37: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]

This changes it to a simple bit mask operation to check
whether the bit is set.

Fixes: 026abc333205 ("gma500: initial medfield merge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905074741.435324-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_tunnel: Fix name string concatenate in __ip_tunnel_create()

commit 000ade8016400d93b4d7c89970d96b8c14773d45 upstream.

By passing a limit of 2 bytes to strncat, strncat is limited to writing
fewer bytes than what it's supposed to append to the name here.

Since the bounds are checked on the line above this, just remove the string
bounds checks entirely since they're unneeded.

Signed-off-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: Replace strncpy with memcpy

commit 166126c1e54d927c2e8efa2702d420e0ce301fd9 upstream.

gcc 8.1.0 complains:

fs/kernfs/symlink.c:91:3: warning:
'strncpy' output truncated before terminating nul copying
as many bytes from a string as its length
fs/kernfs/symlink.c: In function 'kernfs_iop_get_link':
fs/kernfs/symlink.c:88:14: note: length computed here

Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

unifdef: use memcpy instead of strncpy

commit 38c7b224ce22c25fed04007839edf974bd13439d upstream.

New versions of gcc reasonably warn about the odd pattern of

strncpy(p, q, strlen(q));

which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.

There was a comment about _why_ the code used strncpy - to avoid the
terminating NUL byte, but memcpy does the same and avoids the warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kobject: Replace strncpy with memcpy

commit 77d2a24b6107bd9b3bf2403a65c1428a9da83dd0 upstream.

gcc 8.1.0 complains:

lib/kobject.c:128:3: warning:
'strncpy' output truncated before terminating nul copying as many
bytes from a string as its length [-Wstringop-truncation]
lib/kobject.c: In function 'kobject_get_path':
lib/kobject.c:125:13: note: length computed here

Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

test_hexdump: use memcpy instead of strncpy

commit b1286ed7158e9b62787508066283ab0b8850b518 upstream.

New versions of gcc reasonably warn about the odd pattern of

strncpy(p, q, strlen(q));

which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.

Apparently there was a patch for this floating around earlier, but it
got lost.

Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

disable stringop truncation warnings for now

commit 217c3e0196758662aa0429863b09d1c13da1c5d6 upstream.

They are too noisy

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kbuild: suppress packed-not-aligned warning for default setting only

commit 321cb0308a9e76841394b4bbab6a1107cfedbae0 upstream.

gcc-8 reports many -Wpacked-not-aligned warnings. The below are some
examples.

./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
 } __attribute__ ((packed));

./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
 } __attribute__ ((packed));

./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
 } __attribute__ ((packed));

This patch suppresses this kind of warnings for default setting.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.143

kbuild: Set KBUILD_CFLAGS before incl. arch Makefile

(commit ae6b289a37890909fea0e4a1666e19377fa0ed2c upstream)

Set the clang KBUILD_CFLAGS up before including arch/ Makefiles,
so that ld-options (etc.) can work correctly.

This fixes errors with clang such as ld-options trying to CC
against your host architecture, but LD trying to link against
your target architecture.

Signed-off-by: Chris Fries <cfries@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[ND: adjusted context due to upstream having removed code above where I
placed this block in this backport]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/libstub: Make file I/O chunking x86-specific

(commit b3879a4d3a31ef14265a52e8d941cf4b0f6627ae upstream)

The ARM decompressor is finicky when it comes to uninitialized variables
with local linkage, the reason being that it may relocate .text and .bss
independently when executing from ROM. This is only possible if all
references into .bss from .text are absolute, and this happens to be the
case for references emitted under -fpic to symbols with external linkage,
and so all .bss references must involve symbols with external linkage.

When building the ARM stub using clang, the initialized local variable
__chunk_size is optimized into a zero-initialized flag that indicates
whether chunking is in effect or not. This flag is therefore emitted into
.bss, which triggers the ARM decompressor's diagnostics, resulting in a
failed build.

Under UEFI, we never execute the decompressor from ROM, so the diagnostic
makes little sense here. But we can easily work around the issue by making
__chunk_size global instead.

However, given that the file I/O chunking that is controlled by the
__chunk_size variable is intended to work around known bugs on various
x86 implementations of UEFI, we can simply make the chunking an x86
specific feature. This is an improvement by itself, and also removes the
need to parse the efi= options in the stub entirely.

Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1486380166-31868-8-git-send-email-ard.biesheuvel@linaro.org
[ Small readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: avoid clang warning

(commit a45463cbf3f9dcdae683033c256f50bded513d6a upstream)

Building with clang shows lots of warning like:

drivers/amba/bus.c:447:8: warning: implicit conversion from 'long long' to 'int' changes value from 4294967248 to -48
      [-Wconstant-conversion]
static DECLARE_DELAYED_WORK(deferred_retry_work, amba_deferred_retry_func);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/workqueue.h:187:26: note: expanded from macro 'DECLARE_DELAYED_WORK'
        struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f, 0)
                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/workqueue.h:177:10: note: expanded from macro '__DELAYED_WORK_INITIALIZER'
        .work = __WORK_INITIALIZER((n).work, (f)),                      \
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/workqueue.h:170:10: note: expanded from macro '__WORK_INITIALIZER'
        .data = WORK_DATA_STATIC_INIT(),                                \
                ^~~~~~~~~~~~~~~~~~~~~~~
include/linux/workqueue.h:111:39: note: expanded from macro 'WORK_DATA_STATIC_INIT'
        ATOMIC_LONG_INIT(WORK_STRUCT_NO_POOL | WORK_STRUCT_STATIC)
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
include/asm-generic/atomic-long.h:32:41: note: expanded from macro 'ATOMIC_LONG_INIT'
 #define ATOMIC_LONG_INIT(i)     ATOMIC_INIT(i)
                                ~~~~~~~~~~~~^~
arch/arm/include/asm/atomic.h:21:27: note: expanded from macro 'ATOMIC_INIT'
 #define ATOMIC_INIT(i)  { (i) }
                        ~  ^

This makes the type cast explicit, which shuts up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: trusted_foundations: do not use naked function

(commit 4ea7bdc6b5b33427bbd3f41c333e21c1825462a3 upstream)

As documented in GCC naked functions should only use basic ASM
syntax. The extended ASM or mixture of basic ASM and "C" code is
not guaranteed. Currently this works because it was hard coded
to follow and check GCC behavior for arguments and register
placement.

Furthermore with clang using parameters in Extended asm in a
naked function is not supported:
  arch/arm/firmware/trusted_foundations.c:47:10: error: parameter
          references not allowed in naked functions
                : "r" (type), "r" (arg1), "r" (arg2)
                       ^

Use a regular function to be more portable. This aligns also with
the other SMC call implementations e.g. in qcom_scm-32.c and
bcm_kona_smc.c.

Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-cci: remove unnecessary unreachable()

(commit 10d8713429d345867fc8998d6193b233c0cab28c upstream)

Mixing asm and C code is not recommended in a naked function by
gcc and leads to an error when using clang:
  drivers/bus/arm-cci.c:2107:2: error: non-ASM statement in naked
  function is not supported
        unreachable();
        ^

While the function is marked __naked it actually properly return
in asm. There is no need for the unreachable() call.

GCC 7.2 generates identical object files before and after, other
than (for obvious reasons) the line numbers generated by
WANT_WARN_ON_SLOWPATH for all the WARN()s appearing later in the
file.

Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8767/1: add support for building ARM kernel with clang

(commit c1c386681bd73c4fc28eb5cc91cf8b7be9b409ba upstream)

Use cc-options call for compiler options which are not available
in clang. With this patch an ARMv7 multi platform kernel can be
successfully build using clang (tested with version 5.0.1).

Based-on-patches-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8766/1: drop no-thumb-interwork in EABI mode

(commit 22905a24306c8c312c2d66da9f90d09af0414f81 upstream)

According to GCC documentation -m(no-)thumb-interwork is
meaningless in AAPCS configurations. Also clang does not
support the flag:
  clang-5.0: error: unknown argument: '-mno-thumb-interwork'

Just drop -mno-thumb-interwork in AEABI configuration.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/libstub: arm: support building with clang

(commit 41f1c48420709470c51ee0e54b6fb28b956bb4e0 upstream)

When building with CONFIG_EFI and CONFIG_EFI_STUB on ARM, the libstub
Makefile would use -mno-single-pic-base without checking it was
supported by the compiler. As the ARM (32-bit) clang backend does not
support this flag, the build would fail.

This changes the Makefile to check the compiler's support for
-mno-single-pic-base before using it, similar to c1c386681bd7 ("ARM:
8767/1: add support for building ARM kernel with clang").

Signed-off-by: Alistair Strachan <astrachan@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ND: adjusted due to missing commit ce279d374ff3 ("efi/libstub:
 Only disable stackleak plugin for arm64")]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic/scif: fix copy-paste error in scif_create_remote_lookup

commit 6484a677294aa5d08c0210f2f387ebb9be646115 upstream.

gcc '-Wunused-but-set-variable' warning:

drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup':
drivers/misc/mic/scif/scif_rma.c:373:25: warning:
 variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable]

'vmalloc_num_pages' should be used to determine if the address is
within the vmalloc range.

Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl()

commit eceb05965489784f24bbf4d61ba60e475a983016 upstream.

This is a longstanding issue: if the vmbus upper-layer drivers try to
consume too many GPADLs, the host may return with an error
0xC0000044 (STATUS_QUOTA_EXCEEDED), but currently we forget to check
the creation_status, and hence we can pass an invalid GPADL handle
into the OPEN_CHANNEL message, and get an error code 0xc0000225 in
open_info->response.open_result.status, and finally we hang in
vmbus_open() -> "goto error_free_info" -> vmbus_teardown_gpadl().

With this patch, we can exit gracefully on STATUS_QUOTA_EXCEEDED.

Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: use swp_offset as key in shmem_replace_page()

commit c1cb20d43728aa9b5393bd8d489bc85c142949b2 upstream.

We changed the key of swap cache tree from swp_entry_t.val to
swp_offset.  We need to do so in shmem_replace_page() as well.

Hugh said:
 "shmem_replace_page() has been wrong since the day I wrote it: good
  enough to work on swap "type" 0, which is all most people ever use
  (especially those few who need shmem_replace_page() at all), but
  broken once there are any non-0 swp_type bits set in the higher order
  bits"

Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com
Fixes: f6ab1f7f6b2d ("mm, swap: use offset of swap entry as key of swap cache")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:st_magn: Fix enable device after trigger

commit fe5192ac81ad0d4dfe1395d11f393f0513c15f7f upstream.

Currently, we enable the device before we enable the device trigger. At
high frequencies, this can cause interrupts that don't yet have a poll
function associated with them and are thus treated as spurious. At high
frequencies with level interrupts, this can even cause an interrupt storm
of repeated spurious interrupts (~100,000 on my Beagleboard with the
LSM9DS1 magnetometer). If these repeat too much, the interrupt will get
disabled and the device will stop functioning.

To prevent these problems, enable the device prior to enabling the device
trigger, and disable the divec prior to disabling the trigger. This means
there's no window of time during which the device creates interrupts but we
have no trigger to answer them.

Fixes: 90efe055629 ("iio: st_sensors: harden interrupt handling")
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Tested-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"

commit 38317f5c0f2faae5110854f36edad810f841d62f upstream.

This reverts commit ffb80fc672c3a7b6afd0cefcb1524fb99917b2f3.

Turns out that commit is wrong. Host controllers are allowed to use
Clear Feature HALT as means to sync data toggle between host and
periperal.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series

commit effd14f66cc1ef6701a19c5a56e39c35f4d395a5 upstream.

Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to
function correctly. This fixes a but where double pressing numlock locks
up the device completely with need to replug the keyboard.

Signed-off-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usb-storage: Add new IDs to ums-realtek

commit a84a1bcc992f0545a51d2e120b8ca2ef20e2ea97 upstream.

There are two new Realtek card readers require ums-realtek to work
correctly.

Add the new IDs to support them.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: release metadata before running delayed refs

We want to release the unused reservation we have since it refills the
delayed refs reserve, which will make everything go smoother when
running the delayed refs if we're short on our reservation.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_hdmac: fix module unloading

commit 77e75fda94d2ebb86aa9d35fb1860f6395bf95de upstream.

of_dma_controller_free() was not called on module onloading.
This lead to a soft lockup:
watchdog: BUG: soft lockup - CPU#0 stuck for 23s!
Modules linked in: at_hdmac [last unloaded: at_hdmac]
when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate().

Cc: stable@vger.kernel.org
Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_hdmac: fix memory leak in at_dma_xlate()

commit 98f5f932254b88ce828bc8e4d1642d14e5854caa upstream.

The leak was found when opening/closing a serial port a great number of
time, increasing kmalloc-32 in slabinfo.

Each time the port was opened, dma_request_slave_channel() was called.
Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and
never freed. (Well, it was free at module unload, but that's not what we
want).
So, here, kzalloc is more suited for the job since it has to be freed in
atc_free_chan_resources().

Cc: stable@vger.kernel.org
Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Reported-by: Mario Forner <m.forner@be4energy.com>
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: fix potential use after free

commit ecebf55d27a11538ea84aee0be643dd953f830d5 upstream.

The function ext2_xattr_set calls brelse(bh) to drop the reference count
of bh. After that, bh may be freed. However, following brelse(bh),
it reads bh->b_data via macro HDR(bh). This may result in a
use-after-free bug. This patch moves brelse(bh) after reading field.

CC: stable@vger.kernel.org
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: sparc: Fix invalid snd_free_pages() at error path

commit 9a20332ab373b1f8f947e0a9c923652b32dab031 upstream.

Some spurious calls of snd_free_pages() have been overlooked and
remain in the error paths of sparc cs4231 driver code.  Since
runtime->dma_area is managed by the PCM core helper, we shouldn't
release manually.

Drop the superfluous calls.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: control: Fix race between adding and removing a user element

commit e1a7bfe3807974e66f971f2589d4e0197ec0fced upstream.

The procedure for adding a user control element has some window opened
for race against the concurrent removal of a user element.  This was
caught by syzkaller, hitting a KASAN use-after-free error.

This patch addresses the bug by wrapping the whole procedure to add a
user control element with the card->controls_rwsem, instead of only
around the increment of card->user_ctl_count.

This required a slight code refactoring, too.  The function
snd_ctl_add() is split to two parts: a core function to add the
control element and a part calling it.  The former is called from the
function for adding a user control element inside the controls_rwsem.

One change to be noted is that snd_ctl_notify() for adding a control
element gets called inside the controls_rwsem as well while it was
called outside the rwsem.  But this should be OK, as snd_ctl_notify()
takes another (finer) rwlock instead of rwsem, and the call of
snd_ctl_notify() inside rwsem is already done in another code path.

Reported-by: syzbot+dc09047bce3820621ba2@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ac97: Fix incorrect bit shift at AC97-SPSA control write

commit 7194eda1ba0872d917faf3b322540b4f57f11ba5 upstream.

The function snd_ac97_put_spsa() gets the bit shift value from the
associated private_value, but it extracts too much; the current code
extracts 8 bit values in bits 8-15, but this is a combination of two
nibbles (bits 8-11 and bits 12-15) for left and right shifts.
Due to the incorrect bits extraction, the actual shift may go beyond
the 32bit value, as spotted recently by UBSAN check:
 UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7
 shift exponent 68 is too large for 32-bit type 'int'

This patch fixes the shift value extraction by masking the properly
with 0x0f instead of 0xff.

Reported-and-tested-by: Meelis Roos <mroos@linux.ee>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: wss: Fix invalid snd_free_pages() at error path

commit 7b69154171b407844c273ab4c10b5f0ddcd6aa29 upstream.

Some spurious calls of snd_free_pages() have been overlooked and
remain in the error paths of wss driver code.  Since runtime->dma_area
is managed by the PCM core helper, we shouldn't release manually.

Drop the superfluous calls.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: fix lost error code in dio_complete

commit 41e817bca3acd3980efe5dd7d28af0e6f4ab9247 upstream.

commit e259221763a40403d5bb232209998e8c45804ab8 ("fs: simplify the
generic_write_sync prototype") reworked callers of generic_write_sync(),
and ended up dropping the error return for the directio path. Prior to
that commit, in dio_complete(), an error would be bubbled up the stack,
but after that commit, errors passed on to dio_complete were eaten up.

This was reported on the list earlier, and a fix was proposed in
https://lore.kernel.org/lkml/20160921141539.GA17898@infradead.org/, but
never followed up with.  We recently hit this bug in our testing where
fencing io errors, which were previously erroring out with EIO, were
being returned as success operations after this commit.

The fix proposed on the list earlier was a little short -- it would have
still called generic_write_sync() in case `ret` already contained an
error. This fix ensures generic_write_sync() is only called when there's
no pending error in the write. Additionally, transferred is replaced
with ret to bring this code in line with other callers.

Fixes: e259221763a4 ("fs: simplify the generic_write_sync prototype")
Reported-by: Ravi Nankani <rnankani@amazon.com>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: Torsten Mehlan <tomeh@amazon.de>
CC: Uwe Dannowski <uwed@amazon.de>
CC: Amit Shah <aams@amazon.de>
CC: David Woodhouse <dwmw@amazon.co.uk>
CC: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Add generic branch tracing check to intel_pmu_has_bts()

commit 67266c1080ad56c31af72b9c18355fde8ccc124a upstream.

Currently we check the branch tracing only by checking for the
PERF_COUNT_HW_BRANCH_INSTRUCTIONS event of PERF_TYPE_HARDWARE
type. But we can define the same event with the PERF_TYPE_RAW
type.

Changing the intel_pmu_has_bts() code to check on event's final
hw config value, so both HW types are covered.

Adding unlikely to intel_pmu_has_bts() condition calls, because
it was used in the original code in intel_bts_constraints.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181121101612.16272-2-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Move branch tracing setup to the Intel-specific source file

commit ed6101bbf6266ee83e620b19faa7c6ad56bb41ab upstream.

Moving branch tracing setup to Intel core object into separate
intel_pmu_bts_config function, because it's Intel specific.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181121101612.16272-1-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: ensure path name is null terminated at btrfs_control_ioctl

commit f505754fd6599230371cb01b9332754ddc104be1 upstream.

We were using the path name received from user space without checking that
it is null terminated. While btrfs-progs is well behaved and does proper
validation and null termination, someone could call the ioctl and pass
a non-null terminated patch, leading to buffer overrun problems in the
kernel.  The ioctl is protected by CAP_SYS_ADMIN.

So just set the last byte of the path to a null character, similar to what
we do in other ioctls (add/remove/resize device, snapshot creation, etc).

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix coprocessor context offset definitions

commit 03bc996af0cc71c7f30c384d8ce7260172423b34 upstream.

Coprocessor context offsets are used by the assembly code that moves
coprocessor context between the individual fields of the
thread_info::xtregs_cp structure and coprocessor registers.
This fixes coprocessor context clobbering on flushing and reloading
during normal user code execution and user process debugging in the
presence of more than one coprocessor in the core configuration.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: enable coprocessors that are being flushed

commit 2958b66694e018c552be0b60521fec27e8d12988 upstream.

coprocessor_flush_all may be called from a context of a thread that is
different from the thread being flushed. In that case contents of the
cpenable special register may not match ti->cpenable of the target
thread, resulting in unhandled coprocessor exception in the kernel
context.
Set cpenable special register to the ti->cpenable of the target register
for the duration of the flush and restore it afterwards.
This fixes the following crash caused by coprocessor register inspection
in native gdb:

  (gdb) p/x $w0
  Illegal instruction in kernel: sig: 9 [#1] PREEMPT
  Call Trace:
    ___might_sleep+0x184/0x1a4
    __might_sleep+0x41/0xac
    exit_signals+0x14/0x218
    do_exit+0xc9/0x8b8
    die+0x99/0xa0
    do_illegal_instruction+0x18/0x6c
    common_exception+0x77/0x77
    coprocessor_flush+0x16/0x3c
    arch_ptrace+0x46c/0x674
    sys_ptrace+0x2ce/0x3b4
    system_call+0x54/0x80
    common_exception+0x77/0x77
  note: gdb[100] exited with preempt_count 1
  Killed

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix scan ioapic use-before-initialization

commit e97f852fd4561e77721bb9a4e0ea9d98305b1e93 upstream.

Reported by syzkaller:

 BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 7 PID: 5059 Comm: debug Tainted: G           OE     4.19.0-rc5 #16
 RIP: 0010:__lock_acquire+0x1a6/0x1990
 Call Trace:
  lock_acquire+0xdb/0x210
  _raw_spin_lock+0x38/0x70
  kvm_ioapic_scan_entry+0x3e/0x110 [kvm]
  vcpu_enter_guest+0x167e/0x1910 [kvm]
  kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm]
  kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm]
  do_vfs_ioctl+0xa5/0x690
  ksys_ioctl+0x6d/0x80
  __x64_sys_ioctl+0x1a/0x20
  do_syscall_64+0x83/0x6e0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr
and triggers scan ioapic logic to load synic vectors into EOI exit bitmap.
However, irqchip is not initialized by this simple testcase, ioapic/apic
objects should not be accessed.
This can be triggered by the following program:

    #define _GNU_SOURCE

    #include <endian.h>
    #include <stdint.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <sys/syscall.h>
    #include <sys/types.h>
    #include <unistd.h>

    uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff};

    int main(void)
    {
     syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
     long res = 0;
     memcpy((void*)0x20000040, "/dev/kvm", 9);
     res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0);
     if (res != -1)
     r[0] = res;
     res = syscall(__NR_ioctl, r[0], 0xae01, 0);
     if (res != -1)
     r[1] = res;
     res = syscall(__NR_ioctl, r[1], 0xae41, 0);
     if (res != -1)
     r[2] = res;
     memcpy(
     (void*)0x20000080,
     "\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00"
     "\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43"
     "\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33"
     "\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe"
     "\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22"
     "\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb",
     106);
     syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080);
     syscall(__NR_ioctl, r[2], 0xae80, 0);
     return 0;
    }

This patch fixes it by bailing out scan ioapic if ioapic is not initialized in
kernel.

Reported-by: Wei Wu <ww9210@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wei Wu <ww9210@gmail.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb

commit fd65d3142f734bc4376053c8d75670041903134d upstream.

Previously, we only called indirect_branch_prediction_barrier on the
logical CPU that freed a vmcb. This function should be called on all
logical CPUs that last loaded the vmcb in question.

Fixes: 15d45071523d ("KVM/x86: Add IBPB support")
Reported-by: Neel Natu <neelnatu@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: mmu: Fix race in emulated page table writes

commit 0e0fee5c539b61fdd098332e0e2cc375d9073706 upstream.

When a guest page table is updated via an emulated write,
kvm_mmu_pte_write() is called to update the shadow PTE using the just
written guest PTE value. But if two emulated guest PTE writes happened
concurrently, it is possible that the guest PTE and the shadow PTE end
up being out of sync. Emulated writes do not mark the shadow page as
unsync-ed, so this inconsistency will not be resolved even by a guest TLB
flush (unless the page was marked as unsync-ed at some other point).

This is fixed by re-reading the current value of the guest PTE after the
MMU lock has been acquired instead of just using the value that was
written prior to calling kvm_mmu_pte_write().

Signed-off-by: Junaid Shahid <junaids@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2

[ Upstream commit 45611c61dd503454b2edae00aabe1e429ec49ebe ]

The bug is not easily reproducable, as it may occur very infrequently
(we had machines with 20minutes heavy downloading before it occurred)
However, on a virual machine (VMWare on Windows 10 host) it occurred
pretty frequently (1-2 seconds after a speedtest was started)

dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback
before it is set.

This causes the following problems:
- double free of the skb or potential memory leak
- in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually
  general protection fault

Example dmesg output:
[  134.841986] ------------[ cut here ]------------
[  134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0
[  134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0
[  134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[  134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G        W  OE    4.15.0-34-generic #37~16.04.1-Ubuntu
[  134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[  134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0
[  134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286
[  134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006
[  134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490
[  134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4
[  134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000
[  134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000
[  134.842051] FS:  00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[  134.842052] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[  134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  134.842057] Call Trace:
[  134.842060]  ? aa_sk_perm+0x53/0x1a0
[  134.842064]  inet_recvmsg+0x51/0xc0
[  134.842066]  sock_recvmsg+0x43/0x50
[  134.842070]  SYSC_recvfrom+0xe4/0x160
[  134.842072]  ? __schedule+0x3de/0x8b0
[  134.842075]  ? ktime_get_ts64+0x4c/0xf0
[  134.842079]  SyS_recvfrom+0xe/0x10
[  134.842082]  do_syscall_64+0x73/0x130
[  134.842086]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[  134.842086] RIP: 0033:0x7fe331f5a81d
[  134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
[  134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d
[  134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003
[  134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000
[  134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698
[  134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000
[  134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00
[  134.842126] ---[ end trace b7138fc08c83147f ]---
[  134.842144] general protection fault: 0000 [#1] SMP PTI
[  134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[  134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G        W  OE    4.15.0-34-generic #37~16.04.1-Ubuntu
[  134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[  134.842164] RIP: 0010:tcp_close+0x2c6/0x440
[  134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202
[  134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034
[  134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200
[  134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034
[  134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c
[  134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00
[  134.842171] FS:  00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[  134.842173] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[  134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  134.842179] Call Trace:
[  134.842181]  inet_release+0x42/0x70
[  134.842183]  __sock_release+0x42/0xb0
[  134.842184]  sock_close+0x15/0x20
[  134.842187]  __fput+0xea/0x220
[  134.842189]  ____fput+0xe/0x10
[  134.842191]  task_work_run+0x8a/0xb0
[  134.842193]  exit_to_usermode_loop+0xc4/0xd0
[  134.842195]  do_syscall_64+0xf4/0x130
[  134.842197]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[  134.842197] RIP: 0033:0x7fe331f5a560
[  134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[  134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560
[  134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003
[  134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0
[  134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0
[  134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770
[  134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80
[  134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8
[  134.842227] ---[ end trace b7138fc08c831480 ]---

The proposed patch eliminates a potential racing condition.
Before, usb_submit_urb was called and _after_ that, the skb was attached
(dev->tx_skb). So, on a callback it was possible, however unlikely that the
skb was freed before it was set. That way (because dev->tx_skb was not set
to NULL after it was freed), it could happen that a skb from a earlier
transmission was freed a second time (and the skb we should have freed did
not get freed at all)

Now we free the skb directly in ipheth_tx(). It is not passed to the
callback anymore, eliminating the posibility of a double free of the same
skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any()
respectively dev_consume_skb_any() to free the skb.

Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix length check in SNMP processing

[ Upstream commit 9a764c1e59684c0358e16ccaafd870629f2cfe67 ]

The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.

Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rapidio/rionet: do not free skb before reading its length

[ Upstream commit cfc435198f53a6fa1f656d98466b24967ff457d0 ]

skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.

Fixes: e6161d64263 ("rapidio/rionet: rework driver initialization and removal")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: skb_scrub_packet(): Scrub offload_fwd_mark

[ Upstream commit b5dd186d10ba59e6b5ba60e42b3b083df56df6f3 ]

When a packet is trapped and the corresponding SKB marked as
already-forwarded, it retains this marking even after it is forwarded
across veth links into another bridge. There, since it ingresses the
bridge over veth, which doesn't have offload_fwd_mark, it triggers a
warning in nbp_switchdev_frame_mark().

Then nbp_switchdev_allowed_egress() decides not to allow egress from
this bridge through another veth, because the SKB is already marked, and
the mark (of 0) of course matches. Thus the packet is incorrectly
blocked.

Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That
function is called from tunnels and also from veth, and thus catches the
cases where traffic is forwarded between bridges and transformed in a
way that invalidates the marking.

Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
Fixes: abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()"

This reverts commit afeeecc764436f31d4447575bb9007732333818c which was
upstream commit 4ec7cece87b3ed21ffcd407c62fb2f151a366bc1.

From Dietmar May's report on the stable mailing list
(https://www.spinics.net/lists/stable/msg272201.html):

> I've run into some problems which appear due to (a) recent patch(es) on
> the wlcore wifi driver.
>
> 4.4.160 - commit 3fdd34643ffc378b5924941fad40352c04610294
> 4.9.131 - commit afeeecc764436f31d4447575bb9007732333818c
>
> Earlier versions (4.9.130 and 4.4.159 - tested back to 4.4.49) do not
> exhibit this problem. It is still present in 4.9.141.
>
> master as of 4.20.0-rc4 does not exhibit this problem.
>
> Basically, during client association when in AP mode (running hostapd),
> handshake may or may not complete following a noticeable delay. If
> successful, then the driver fails consistently in warn_slowpath_null
> during disassociation. If unsuccessful, the wifi client attempts multiple
> times, sometimes failing repeatedly. I've had clients unable to connect
> for 3-5 minutes during testing, with the syslog filled with dozens of
> backtraces. syslog details are below.
>
> I'm working on an embedded device with a TI 3352 ARM processor and a
> murata wl1271 module in sdio mode. We're running a fully patched ubuntu
> 18.04 ARM build, with a kernel built from kernel.org's stable/linux repo <https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.9.y&id=afeeecc764436f31d4447575bb9007732333818c>.
> Relevant parts of the kernel config are included below.
>
> The commit message states:
>
> > /I've only seen this few times with the runtime PM patches enabled so
> > this one is probably not needed before that. This seems to work
> > currently based on the current PM implementation timer. Let's apply
> > this separately though in case others are hitting this issue./
> We're not doing anything explicit with power management. The device is an
> IoT edge gateway with battery backup, normally running on wall power. The
> battery is currently used solely to shut down the system cleanly to avoid
> filesystem corruption.
>
> The device tree is configured to keep power in suspend; but the device
> should never suspend, so in our case, there is no need to call
> wl1271_ps_elp_wakeup() or wl1271_ps_elp_sleep(), as occurs in the patch.

Signed-off-by: Sasha Levin <sashal@kernel.org>

media: em28xx: Fix use-after-free when disconnecting

[ Upstream commit 910b0797fa9e8af09c44a3fa36cb310ba7a7218d ]

Fix bug by moving the i2c_unregister_device calls after deregistration
of dvb frontend.

The new style i2c drivers already destroys the frontend object at
i2c_unregister_device time.
When the dvb frontend is unregistered afterwards it leads to this oops:

  [ 6058.866459] BUG: unable to handle kernel NULL pointer dereference at 00000000000001f8
  [ 6058.866578] IP: dvb_frontend_stop+0x30/0xd0 [dvb_core]
  [ 6058.866644] PGD 0
  [ 6058.866646] P4D 0

  [ 6058.866726] Oops: 0000 [#1] SMP
  [ 6058.866768] Modules linked in: rc_pinnacle_pctv_hd(O) em28xx_rc(O) si2157(O) si2168(O) em28xx_dvb(O) em28xx(O) si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) videobuf2_core(O) videodev(O) media(O) bluetooth ecdh_generic ums_realtek uas rtl8192cu rtl_usb rtl8192c_common rtlwifi usb_storage snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic i2c_mux snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core kvm_intel kvm irqbypass [last unloaded: videobuf2_memops]
  [ 6058.867497] CPU: 2 PID: 7349 Comm: kworker/2:0 Tainted: G        W  O    4.13.9-gentoo #1
  [ 6058.867595] Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014
  [ 6058.867692] Workqueue: usb_hub_wq hub_event
  [ 6058.867746] task: ffff88011a15e040 task.stack: ffffc90003074000
  [ 6058.867825] RIP: 0010:dvb_frontend_stop+0x30/0xd0 [dvb_core]
  [ 6058.867896] RSP: 0018:ffffc90003077b58 EFLAGS: 00010293
  [ 6058.867964] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000010040001f
  [ 6058.868056] RDX: ffff88011a15e040 RSI: ffffea000464e400 RDI: ffff88001cbe3028
  [ 6058.868150] RBP: ffffc90003077b68 R08: ffff880119390380 R09: 000000010040001f
  [ 6058.868241] R10: ffffc90003077b18 R11: 000000000001e200 R12: ffff88001cbe3028
  [ 6058.868330] R13: ffff88001cbe68d0 R14: ffff8800cf734000 R15: ffff8800cf734098
  [ 6058.868419] FS:  0000000000000000(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000
  [ 6058.868511] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 6058.868578] CR2: 00000000000001f8 CR3: 00000001113c5000 CR4: 00000000001406e0
  [ 6058.868662] Call Trace:
  [ 6058.868705]  dvb_unregister_frontend+0x2a/0x80 [dvb_core]
  [ 6058.868774]  em28xx_dvb_fini+0x132/0x220 [em28xx_dvb]
  [ 6058.868840]  em28xx_close_extension+0x34/0x90 [em28xx]
  [ 6058.868902]  em28xx_usb_disconnect+0x4e/0x70 [em28xx]
  [ 6058.868968]  usb_unbind_interface+0x6d/0x260
  [ 6058.869025]  device_release_driver_internal+0x150/0x210
  [ 6058.869094]  device_release_driver+0xd/0x10
  [ 6058.869150]  bus_remove_device+0xe4/0x160
  [ 6058.869204]  device_del+0x1ce/0x2f0
  [ 6058.869253]  usb_disable_device+0x99/0x270
  [ 6058.869306]  usb_disconnect+0x8d/0x260
  [ 6058.869359]  hub_event+0x93d/0x1520
  [ 6058.869408]  ? dequeue_task_fair+0xae5/0xd20
  [ 6058.869467]  process_one_work+0x1d9/0x3e0
  [ 6058.869522]  worker_thread+0x43/0x3e0
  [ 6058.869576]  kthread+0x104/0x140
  [ 6058.869602]  ? trace_event_raw_event_workqueue_work+0x80/0x80
  [ 6058.869640]  ? kthread_create_on_node+0x40/0x40
  [ 6058.869673]  ret_from_fork+0x22/0x30
  [ 6058.869698] Code: 54 49 89 fc 53 48 8b 9f 18 03 00 00 0f 1f 44 00 00 41 83 bc 24 04 05 00 00 02 74 0c 41 c7 84 24 04 05 00 00 01 00 00 00 0f ae f0 <48> 8b bb f8 01 00 00 48 85 ff 74 5c e8 df 40 f0 e0 48 8b 93 f8
  [ 6058.869850] RIP: dvb_frontend_stop+0x30/0xd0 [dvb_core] RSP: ffffc90003077b58
  [ 6058.869894] CR2: 00000000000001f8
  [ 6058.875880] ---[ end trace 717eecf7193b3fc6 ]---

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/khugepaged: collapse_shmem() do not crash on Compound

commit 06a5e1268a5fb9c2b346a3da6b97e85f2eba0f07 upstream.

collapse_shmem()'s VM_BUG_ON_PAGE(PageTransCompound) was unsafe: before
it holds page lock of the first page, racing truncation then extension
might conceivably have inserted a hugepage there already.  Fail with the
SCAN_PAGE_COMPOUND result, instead of crashing (CONFIG_DEBUG_VM=y) or
otherwise mishandling the unexpected hugepage - though later we might
code up a more constructive way of handling it, with SCAN_SUCCESS.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261529310.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/khugepaged: collapse_shmem() without freezing new_page

commit 87c460a0bded56195b5eb497d44709777ef7b415 upstream.

khugepaged's collapse_shmem() does almost all of its work, to assemble
the huge new_page from 512 scattered old pages, with the new_page's
refcount frozen to 0 (and refcounts of all old pages so far also frozen
to 0).  Including shmem_getpage() to read in any which were out on swap,
memory reclaim if necessary to allocate their intermediate pages, and
copying over all the data from old to new.

Imagine the frozen refcount as a spinlock held, but without any lock
debugging to highlight the abuse: it's not good, and under serious load
heads into lockups - speculative getters of the page are not expecting
to spin while khugepaged is rescheduled.

One can get a little further under load by hacking around elsewhere; but
fortunately, freezing the new_page turns out to have been entirely
unnecessary, with no hacks needed elsewhere.

The huge new_page lock is already held throughout, and guards all its
subpages as they are brought one by one into the page cache tree; and
anything reading the data in that page, without the lock, before it has
been marked PageUptodate, would already be in the wrong.  So simply
eliminate the freezing of the new_page.

Each of the old pages remains frozen with refcount 0 after it has been
replaced by a new_page subpage in the page cache tree, until they are
all unfrozen on success or failure: just as before.  They could be
unfrozen sooner, but cause no problem once no longer visible to
find_get_entry(), filemap_map_pages() and other speculative lookups.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261527570.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/khugepaged: minor reorderings in collapse_shmem()

commit 042a30824871fa3149b0127009074b75cc25863c upstream.

Several cleanups in collapse_shmem(): most of which probably do not
really matter, beyond doing things in a more familiar and reassuring
order.  Simplify the failure gotos in the main loop, and on success
update stats while interrupts still disabled from the last iteration.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261526400.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/khugepaged: collapse_shmem() remember to clear holes

commit 2af8ff291848cc4b1cce24b6c943394eb2c761e8 upstream.

Huge tmpfs testing reminds us that there is no __GFP_ZERO in the gfp
flags khugepaged uses to allocate a huge page - in all common cases it
would just be a waste of effort - so collapse_shmem() must remember to
clear out any holes that it instantiates.

The obvious place to do so, where they are put into the page cache tree,
is not a good choice: because interrupts are disabled there.  Leave it
until further down, once success is assured, where the other pages are
copied (before setting PageUptodate).

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261525080.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/khugepaged: fix crashes due to misaccounted holes

commit aaa52e340073b7f4593b3c4ddafcafa70cf838b5 upstream.

Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent
hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by
clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later
closed and unlinked.

khugepaged's collapse_shmem() was forgetting to update mapping->nrpages
on the rollback path, after it had added but then needs to undo some
holes.

There is indeed an irritating asymmetry between shmem_charge(), whose
callers want it to increment nrpages after successfully accounting
blocks, and shmem_uncharge(), when __delete_from_page_cache() already
decremented nrpages itself: oh well, just add a comment on that to them
both.

And shmem_recalc_inode() is supposed to be called when the accounting is
expected to be in balance (so it can deduce from imbalance that reclaim
discarded some pages): so change shmem_charge() to update nrpages
earlier (though it's rare for the difference to matter at all).

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils
Fixes: 800d8c63b2e98 ("shmem: add huge pages support")
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

shmem: introduce shmem_inode_acct_block

commit 0f0796945614b7523987f7eea32407421af4b1ee upstream.

The shmem_acct_block and the update of used_blocks are following one
another in all the places they are used.  Combine these two into a
helper function.

Link: http://lkml.kernel.org/r/1497939652-16528-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>