staging: comedi: addi_apci_all.c: remove unused file

The Makefile for the comedi subsystem does not compile this file
for any .config selection. This file would allow building one big
driver to support all the addi-data cards.

The addi-data drivers are a big enough mess as-is. Just remove this
file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Iam Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Provide ID Prom through sysfs.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Expose modalias through sysfs.

Also include it in the hotplug event so that udev can
provide the respective driver.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Implement device matching on the bus level.

Devices are match based upon their vendor and device ids.  Since
the individual drivers provide a list of supported ids they do not
need to implement the matching themselves.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: Expose DEVICE_TABLE for ipoctal.

The modalias entries for the module are now created.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Make ipack_driver_ops const.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Move device ids from ipoctal.c to ipack_ids.h.

Rename them in the process.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Parse vendor and device id.

Also expose the values through sysfs.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Read the ID space during device registration.

We keep a copy of the ID space for later use.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: implement ipack device table.

The modaliases look like ipack:fXvNdM, where X is the format version (8
bit) and N and M are the vendor and device ID represented as 32 bit
hexadecimal numbers each. Using 32 bits allows us to define IPACK_ANY_ID
as (~0) without interfering with the valid ids.

The resulting modalias string for ipoctal.ko looks like this (once
ipoctal provides a device table):
alias:          ipack:f01v000000F0d00000048*
alias:          ipack:f01v000000F0d0000002A*
alias:          ipack:f01v000000F0d00000022*
(output from modinfo)

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: Tidy up ipoctal some more.

No need to have a struct when it has only one field.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: ipoctal cleanups.

Define memory address space, fix sparse warnings and mark the structs
reflecting hardware memory layout "packed" to be on the safe side.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: remove read/write operations from ipack_bus_ops

They are not used any longer.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Remove the read/write functions from ipack_bus_ops.

They are not used any longer.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: Convert ipoctal to directly use ioread/write functions.

Before it was using the functions in ipack_bus_ops.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode.

During initialization we configure the TPCI200 so it does not swap data
lanes on IndustryPack module access.  The read and write functions are
changed accordingly.

We are taking this approach in the hope that all IP Carriers are able to
present the Module memory layout unchanged.  We can thus directly access
the memory and registers of IP Modules without having to rely on the
read and write wrappers currently exposed in ipack_bus_opts.  A later
patch will convert the existing driver and remove the wrappers.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Reorganize tpci200_probe in preparation for functional changes.

These changes make it easier to add more initialization steps later on.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: replace calls to kmalloc and memset with kzalloc

the kzalloc does allocates memory and sets the data at the memory
which is allocated to 0,

The driver does uses the kmalloc and memset at some points in the code
replace them with a single call to kzalloc

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: remove casting of return value from kmalloc

as per Documentation/CodingStyle, casting of void pointer to
any other pointer is not needed

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: Remove all leftover kernel version checks \o/

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: Remove unneeded UF_NETIF_TX_* macros

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: unifi_priv.h: Remove KERNEL_VERSION checks

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: unifi_wext.h: Remove KERNEL_VERSION checks

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: drv.c: Remove KERNEL_VERSION checks and associated defines

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: Drop unused UNIFI_NET_NAME configuration option

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: remove unused define ALLOW_Q_PAUSE

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: netdev.c: Clean up KERNEL_VERSION checks: 2.6.37

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: netdev.c: Clean up KERNEL_VERSION checks: 2.6.34

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: netdev.c: Clean up KERNEL_VERSION checks: 2.6.32

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: netdev.c: Clean up KERNEL_VERSION checks: 2.6.29

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: netdev.c: Clean up KERNEL_VERSION checks: 2.6.28

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: netdev.c: Clean up KERNEL_VERSION checks: 2.6.27

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: netdev.c: Clean up KERNEL_VERSION checks: <=2.6.25

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: use pr_info and pr_err rather than printk

Convert printk(KERN_INFO to pr_info( and printk(KERN_ERR to pr_err(.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: fix error handling in bcm_init()

bcm_init() does not have proper error handling of usb_register().
The patch implements one.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Convert INT to int in InterfaceInit.h

This patch converts INT to int in InterfaceInit.h

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix white space issues in InterfaceInit.h

This patch fixes white space issue in InterfaceInit.h
as reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "winbond" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: solve coding style problem

remove the spaces and replace with tabs at the beginning of a line
and also remove space between function call and its open paranthesis

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: use kernel's way of returning error codes

The error codes the kernel functions return are -ve numbers, convert this
function to follow the other kernel functions

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sep: Correct misspelled "remap_page_range" -> "remap_pfn_range"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xxfb: copy device name before we pass to the smtc_alloc_fb_info

the name is not initialised and passed to the function smtc_alloc_fb_info
and copies the name into a member of fb structure.

copy the name before calling alloc_fb_info.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Javier Muñoz <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: Alarm driver cleanups

Little cleanups. Enum value ANDROID_ALARM_TYPE_COUNT was treated as
an alarm type within a switch statement. That condition was unreachable
though.

Signed-off-by: Dae S. Kim <dae@velatum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: release firmware before returning

we request_firmware in slic_card_download_gbrcv and we return out
with out calling release_firmware, where we compare against a
firmware lengths of certain device ids.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: return early before calling request_firmware with empty firmware filename

when the device id doesn't match in slic_card_download_gbrcv the filename is "",
i.e an empty name, and we try calling request_firmware with that name,
actually we can just fail out at default case before even calling request_firmware

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: fix dbg print when kzalloc failed to allocate qt_port

the port was kzalloced but the print statement says that its kmalloc.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cptm1217: use module_i2c_driver macro

use the module_i2c_driver and remove the reimplementation of module_i2c_driver

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sbe-2t3e3: fix sparse warnings

warnings:
drivers/staging/sbe-2t3e3/netdev.c:24:5: warning: symbol 't3e3_ioctl' was not declared. Should it be static?
drivers/staging/sbe-2t3e3/netdev.c:85:5: warning: symbol 't3e3_open' was not declared. Should it be static?
drivers/staging/sbe-2t3e3/netdev.c:100:5: warning: symbol 't3e3_close' was not declared. Should it be static?

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sbe-2t3e3: fix sparse warnings

warnings:

drivers/staging/sbe-2t3e3/netdev.c:30:56: warning: incorrect type in initializer (different address spaces)
drivers/staging/sbe-2t3e3/netdev.c:30:56:    expected void *data
drivers/staging/sbe-2t3e3/netdev.c:30:56:    got void [noderef] <asn:1>*
drivers/staging/sbe-2t3e3/netdev.c:48:44: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/sbe-2t3e3/netdev.c:48:44:    expected void const [noderef] <asn:1>*from
drivers/staging/sbe-2t3e3/netdev.c:48:44:    got void *data
drivers/staging/sbe-2t3e3/netdev.c:54:34: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sbe-2t3e3/netdev.c:54:34:    expected void [noderef] <asn:1>*dst
drivers/staging/sbe-2t3e3/netdev.c:54:34:    got void *data

type must be __user.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/crystalhd/crystalhd_lnx.c: adjust inconsistent IS_ERR and PTR_ERR

Change the call to PTR_ERR to access the value just tested by IS_ERR.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1;
@@

(
if (IS_ERR(e)) { ... PTR_ERR(e) ... }
|
if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... }
|
*if (IS_ERR(e))
 { ...
*  PTR_ERR(e1)
   ... }
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: fix possible memory leak in bcm_char_ioctl()

psFwInfo has been allocated in this function and should be
freed before leaving from the error handling cases.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: using is_zero_ether_addr() to simplify the code

Using is_zero_ether_addr() to simplify the code

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: use is_zero_ether_addr() instead of memcmp()

Using is_zero_ether_addr() instead of directly use
memcmp(addr, "\x00\x00\x00\x00\x00\x00", ETH_ALEN)
to determine if the ethernet address is all zeros.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: Remove defines that are not used

This driver has a number of defines, etc. that are not used.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: Fix allocations not checked for failure

The driver has a dev_alloc_skb() and an skb_clone() call that are not
checked for failure.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: use is_zero_ether_addr() instead of memcmp()

Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: fix possible memory leak in do_patch_convert_download()

pfw has been allocated in function xbv_to_patch() and should be
freed before leaving from the error handling cases.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: using random_ether_addr() to generate random MAC

Using random_ether_addr() to generate a random Ethernet
address (MAC) that is not multicast and has the local
assigned bit set. Not need to duplicating its implementation.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: using random_ether_addr() to generate random MAC

Using random_ether_addr() to generate a random Ethernet
address (MAC) that is not multicast and has the local
assigned bit set. Not need to duplicating its implementation.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: using random_ether_addr() to generate random MAC

Using random_ether_addr() to generate a random Ethernet
address (MAC) that is not multicast and has the local
assigned bit set. Not need to duplicating its implementation.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: remove casting of returned pointer from kmalloc

as per Documentation/CodingStyle we dont need to cast the return of
kmalloc

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: remove pointless conditional before kfree_skb()

Remove pointless conditional before kfree_skb().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: use kzalloc to allocate firmware pointer

the firmware pointer is allocated with kmalloc and memset,
instead we can just do a kzalloc which will return a memory that
has been memset.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: rtl871x_mlme.c: use is_zero_ether_addr() instead of memcmp()

Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is
all zeros.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: use is_zero_ether_addr() instead of memcmp()

Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: use is_zero_ether_addr() instead of memcmp()

Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: use is_zero_ether_addr() instead of memcmp()

Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup: lower default software speech rate

Speech synthesis beginners need a low speech rate, and trained people
want a high speech rate.  A medium speech rate is thus actually not a
good default for neither.  Since trained people will typically know how
to change the rate, better default for a low speech rate, which
beginners can grasp and learn how to increase it afterwards

This was agreed with users on the speakup mailing list.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: use is_broadcast_ether_addr() to simplify the code

Using is_broadcast_ether_addr() to simplify the code.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: use is_broadcast_ether_addr() instead of memcmp()

Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: use is_broadcast_ether_addr() instead of memcmp()

Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: use is_broadcast_ether_addr() instead of memcmp()

Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: using is_broadcast_ether_addr() to simplify the code

Using is_broadcast_ether_addr() to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: using is_broadcast_ether_addr() to simplify the code

Using is_broadcast_ether_addr() to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging "vt6656" Typo rename Embeded to Embedded.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging "vt6656" Typo rename Caculate to Calculate.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging "vt6656" Fix typos in comments, and in a printk message.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "vt6655" Typo change *Caculate to *Calculate.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "vt6655" Typo change *Embeded to *Embedded.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "vt6655" Fix typos in comments.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/vme: Use pr_ printks in vme_pio2_core.c

The below checkpatch warnings was fixed,

-WARNING: Prefer pr_err(... to printk(KERN_ERR, ...

and added pr_fmt.

Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vme: Fix a white space issue

The below checkpatch error was fixed.

-ERROR: trailing whitespace

Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: use system_nrt_wq instead of custom one

There isn't much reason to use custom workqueue in nvec.  It can use
system_nrt_wq instead and cancel the two work items on removal.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: do not depend on MACH_PAZ00

With the removal of board files on the tegra arch, drivers can now only
be instantiated via device tree. Consequently, all MACH_<board> config
variables are removed. As a temporary solution always enable building
for the (up to now) only supported paz00 board until nvec is full ported
to device tree.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: release sync write lock in error case

We forgot to release the sync write lock in case the async write
fails. Found by rpiloose on IRC.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: fix clock setup

commit 30b68231 "ARM: tegra: clock: add i2c fast clock entry in clock table"
added a new clock for the i2c controllers, so clock requests are no longer
conclusive. Fix this by specifying "div-clk" explicitly.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: use is_broadcast_ether_addr() instead of memcmp()

Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: Fix typo in staging/wlags49_h2 driver

Correct spelling typo in staging/wlags49_h2

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlagn49_h2: move open brace of if from below to beside of if statement

the opening brace of the if statement should be beside to it, not below to it.

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: remove return statements at the end of all void functions

this patch removes the return statement at the end of all void functions,
since the function returning void no need to have a return at the end of the
function.

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlagn49_h2: fix the checkpatch warning about the space after the open paranthesis

the following fix is done in the wl_wds_netif_carrier_off function:

wl_netdev.c:1764: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1764: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1768: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1768: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1768: ERROR: space required before the open parenthesis '('
wl_netdev.c:1769: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1769: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1769: ERROR: space required before the open parenthesis '('
wl_netdev.c:1770: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1770: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1770: ERROR: space required before the open parenthesis '('
wl_netdev.c:1771: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1771: ERROR: space prohibited before that close parenthesis ')'

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: style fix in w1_wds_netif_carrier_off

whitespaces at beginning of the line are removed and are replaced
with the tabs

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: remove unneded return in wl_wds_netif_carrier_off

the return is at the end of void function, which is not needed as this
function returns void.

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: coding style fix at wl_wds_netif_carrier_off

no braces needed for single statement if block

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: remove pointless conditional before kfree_skb()

Remove pointless conditional before kfree_skb().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Fix typo in staging/ozwpan

Fix spelling typo in staging/ozwpan

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: asus_oled: Add suspend/resume callbacks

- Add simple suspend/resume PM callbacks to disable oled display on
  suspend and return to previous state on resume

Signed-off-by: Jonathan Brett <jonbrett.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rts_pstor: remove braces {} in rtsx_chip.c

fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rts_pstor: remove braces {} in rtsx_transport.c

fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rts_pstor: remove braces {} in rtsx_card.c

fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>