[RAMEN9610-12039][9610] drivers: power: add s2mcs02 charger for code sync

Add s2mcs02 charger driver for code sync.

Change-Id: Ifb977b368d96262f85666eabbb401f83e6a54b7c
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-12039][9610] drivers: power, led: add s2mu106 drivers for code sync

Add S2MU106 charger, fuelgauge, powermeter, FLED,
RGB LED, haptic driver for code sync.

Change-Id: Ib0dec6feed3aff93dfedbe8c15466218bab47ae5
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-12036][9610] media:radio: Change RDS RT validate condition

Change-Id: I3403c862ccac343d36fb0d8cc7aa09f86e8990e6
Signed-off-by: Yunsu Kim <iamyunsu.kim@samsung.com>

[RAMEN9610-11989][COMMON] muic: integrate MU004 and MU106

Change-Id: Iadc8acec977cd1675c03e628f1d70cdb9e02b5d4
Signed-off-by: Kim Taejeong <tj.kim@samsung.com>

[RAMEN9610-11989][COMMON] mfd: integrate MU004 and MU106

Change-Id: I8ec36e5eaa46df2b9a96e7f21eba925eb31cbbfc
Signed-off-by: Kim Taejeong <tj.kim@samsung.com>

[RAMEN9610-11980][COMMON] usb: gadget: add vendor specific command in mass storage

Change-Id: If8b4e8a89bbff020beee88618693514b61cffd22
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11980][COMMON] arm64: config: enable mass_storage for charging mode

Change-Id: I6ff2e94732e526e9543ff9be13b1ec9e7a55f04e
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11930] fbdev: dpu20: added frame rate information in psr_info

Change-Id: I12af987261cc24bbe5d87f7f75da4a6ed87f6efb
Signed-off-by: ChiHun Won <chihun.won@samsung.com>

[RAMEN9610-11923][COMMON] ASoC: abox: request dram during firmware execution

Firmware can access DRAM anytime but current source code
only request DRAM during DMA operation.

Change-Id: Ie3e8697c863281967aedeb645f886c747ed21e6a
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>

[RAMEN9610-11799][9610] media: radio: sync samsung/exynos9609

Change-Id: I33fed3e018a9a1d9db5c58b77cbc036ed5dc9a94
Signed-off-by: Yunsu Kim <iamyunsu.kim@samsung.com>

[RAMEN9610-11423][COMMON][MODAP-16389] gnss_if: fix wake_lock for iod

Change-Id: I48e72faa8f3a440364e067f5ce86fea314379c21
Signed-off-by: Soungkwan Kimn <sk.kimn@samsung.com>

[RAMEN9610-11423][COMMON][MODAP-16389] gnss_if: add sysfs for debug

Change-Id: I595973afea20ace6773d5caff433e75086418b0c
Signed-off-by: Soungkwan Kimn <sk.kimn@samsung.com>

[RAMEN9610-11413][COMMON][MODAP-16546] drivers: modem_if:  Open embms channel for network

Change-Id: I423b4314885af52e42570c961b360289e5b2d725
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>

[RAMEN9610-11292][9610] media: radio: Remove RDS debugging logs, Increase FM_RDS_MEM_SIZE_PARSER size to 2000

Change-Id: If0ff07353429238e6cd72360ba38d2ce0b994da1
Signed-off-by: Yunsu Kim <iamyunsu.kim@samsung.com>

[RAMEN9610-11757] irq/work: Improve the flag definitions

IRQ_WORK_FLAGS is defined simply to 3UL. This is confusing as it
says nothing about its purpose. Define IRQ_WORK_FLAGS as a bitwise
OR of IRQ_WORK_PENDING and IRQ_WORK_BUSY and change its name to
IRQ_WORK_CLAIMED.

While we're at it: use the BIT() macro for all flags.

Change-Id: Ie68d7f4a642fa160600bc329c8a7b580e9627a93
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515125996-21564-1-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

[RAMEN9610-11757] irq/work: Use llist_for_each_entry_safe

The llist_for_each_entry() loop in irq_work_run_list() is unsafe because
once the works PENDING bit is cleared it can be requeued on another CPU.

Use llist_for_each_entry_safe() instead.

Change-Id: I8680657f89c008f879b4e88e3499a7e44f2978a1
Fixes: 16c0890dc66d ("irq/work: Don't reinvent the wheel but use existing llist API")
Reported-by:Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Link: http://lkml.kernel.org/r/151027307351.14762.4611888896020658384@mail.alporthouse.com

[RAMEN9610-11757] irq/work: Don't reinvent the wheel but use existing llist API

Use the proper llist APIs instead of open-coded variants of them.

Change-Id: I66dd8fc945a5e2cebca80388d2887f7d6ef71988
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1509414414-14987-1-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

[RAMEN9610-11757] irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP

Commit 478850160636 ("irq_work: Implement remote queueing") provides
irq_work_on_queue() only for SMP builds.  However, providing it simplifies
code that submits irq_work to lists of CPUs, eliminating the !SMP special
cases.  This commit therefore maps irq_work_on_queue() to irq_work_on()
in !SMP builds, but validating the specified CPU.

Change-Id: I08c088556952a06471567c86c1993d41d971749a
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

[RAMEN9610-11731][common][9610] wlbt: Regulatory Rules should not be updated based on beacon hints.

CFG80211 Regulatory Rules should not be
updated based on beacon hints.

Correction for Config Name in Kconfig performed as well.

Change-Id: Ib30ffbf7459c6fb6b92dc8578b2cb3dbd4b1356b
SCSC-Bug-Id: SSB-47118
Signed-off-by: Mohit Ghuley <mohit.ghuley@samsung.com>

[RAMEN9610-11727][HACK] g2d: lock memory frequency as 845Mhz

Change-Id: Id5f3f6c1f95f3ca39ab6fa0b63777f0384fc93b9
Signed-off-by: Hyesoo Yu <hyesoo.yu@samsung.com>

[RAMEN9610-11727] g2d: remove use-after-free of context for performance

delayed work should not be called after device close.
However cancel_delayed_work() will cancel future invocations,
it does not guarantee it to be finished before cancel_delayed_work()
returns if delayed work is currently being processed.

Naive way to fix would be to change cancel_delayed_work into
cancle_delayed_work_sync. However it create a deadlock because
delayed work calls g2d_put_performance, which will wait on
g2d_dev->lock_qos. That mutex was already locked in
previously g2d_put_performance, which is waiting for
delayed work to finish.

So, use flush_delayed_work in g2d_release instead of
cancel_flush_work. Then, we don't request g2d_put_performance
in g2d_release because the request of performance always
have the delayed work to release the lock, so that must be
called before g2d context release.

Change-Id: I0c47ced4ca10c68f382c3f0a368f1bf16b7cd4b8
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-11639][COMMON] scsi: ufs: Print available lane for infomation

Change-Id: Icbc16b176d9966dc94613fbed6e1908b0b7c198d
Signed-off-by: JaeHun Jung <jh0801.jung@samsung.com>

[RAMEN9610-11637][COMMON] usb: host: re-initilize runtime pm

Change-Id: Ia630f71b0d1171e8dbeb73782ec0618d47a2bba4
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11637][COMMON] usb: host: allocate dma memory in booting time

Change-Id: If6dd884c7a8bedbddf81a97dcb48a94e18c634f8
Signed-off-by: taehyun.cho <taehyun.cho@samsung.com>

[RAMEN9610-11637][COMMON] usb: phy: add USB3.0 isolation feature

Change-Id: I9332363df4ceea63c60f2d9511fda670921e68ed
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11636][COMMON] mmc: dw_mmc: sdcard power off when to card detect

Change-Id: I9a53d9e51347d947d66d8648bc7f21d672d3e83c
Signed-off-by: dukhyun kwon <d_hyun.kwon@samsung.com>

[RAMEN9610-11636][9610] arm64: dts: enable skip init no card tray for sdcard

Change-Id: Id81a4c82446f555013968952d80cde51621a39e2
Signed-off-by: dukhyun kwon <d_hyun.kwon@samsung.com>

[RAMEN9610-11636][COMMON] mmc: dw_mmc: skip init when to not card tray.

Change-Id: I95cb1bb52c1937c7528b3367e308f791cea46663
Signed-off-by: dukhyun kwon <d_hyun.kwon@samsung.com>

[RAMEN9610-11578] arm64: dts: chub reserved memory size is modified

This patch reduces chub reserved memory from 512KB to 320KB

Change-Id: I464a9fb5342209453fc90155fee8b896e80e38f9
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[RAMEN9610-11577][COMMON] lib: dss: change dss virt-addr base

RAMEN/A9 assign a new reserved memory to the camera
library. It was created because there was a request
to match Makalu by moving virt-addr base of DSS area.

Change-Id: I295110f600385377275561c0b70ea8f5e2ce170f
Signed-off-by: Donghyeok Choe <d7271.choe@samsung.com>

[RAMEN9610-11577][COMMON] soc: samsung: change prototype chipid_board_id_show

Change-Id: Id45c26d4fa9d93be7eebc1ec05e7c17f763c208d
Signed-off-by: Sangwook Ju <sw.ju@samsung.com>

[RAMEN9610-11577][COMMON] soc: exynos-chipid: Add Board revision sysfs node

Change-Id: I407e2fbdeb876584b278a966ba74be6292683f01
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[RAMEN9610-11575] change iic div calculation formula for frquency not up to the set value

Change-Id: Ic6514913c0cb9062ef8daaffb433601f6dad6bb3

[RAMEN9610-11559][COMMON] spi: s3c64xx: Fix runtime PM feature for SPI driver

Add protection code for runtime pm at SPI driver.
Now spi driver waits for runtime_pm until recovers from
suspended mode.

Change-Id: I2402e4f13e92e3d941f0b2e91716558ad7ecc8d0
Signed-off-by: Kyungwoo Kang <kwoo.kang@samsung.com>

[RAMEN9610-11554][9610] soc: samsung: cal-if: Added cal_print_wakeup_reason.

Change-Id: I27f38d8896d07e7c368d35b77da7ae94fae51e1c
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[RAMEN9610-11479][9610] vipx: support ofi framework

  - add ofi framework support
  - remove reserved memory
  - enhance debug feture

Change-Id: I2b20c2872e264ef12ad264b23c1dc7027cb62ad8
Signed-off-by: Sanghwa Park <senius.park@samsung.com>

[RAMEN9610-11497][COMMON] arm64: dts: Add dbg-uart-ch property to serial_0 node

dbg-uart-ch property is used for lenovo uart console resume latency
issue in user binary.

Change-Id: I3060a96df912bc86bedee43b35fd126bd52600cf
Signed-off-by: myung-su.cha <myung-su.cha@samsung.com>

[RAMEN9610-11497][COMMMON] serial: samsung: Set default Baud rate as 115200

Abnormal resume latency issue in user binary is because Baud
rate is set 9600. To resolve this issue, this patch makes Baud
rate as 115200 when requested Baud rate is 0.

Change-Id: I71b54f2adc63f96032b9c628a5afb7e5e5377fc8
Signed-off-by: myung-su.cha <myung-su.cha@samsung.com>

[RAMEN9610-11632][9610] fimc-is2: add function for bts_update for thermal

 - update bts function for thermal

Change-Id: Ic7ea5c425a9a839bf4db2921d7d1458a50243b29
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>

[RAMEN9610-11632][COMMON] fimc-is2: add function for bts_update_scen when throttling state

 - when throttling state, need to adjust camera device's mo

Change-Id: Ibb4a463788e3cd41f217d1490af97cba7e5df3d5
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>

[RAMEN9610-11632][9610] bts: add scenario for thermal throttling

This patch adds scenario for thermal throttling.
The bandwidth of ISP blocks limited when thermal throttling.

Change-Id: If36c08fbbf8a74b144e28896b44e91b8b055bc3a
Signed-off-by: Taekki Kim <taekki.kim@samsung.com>

[RAMEN9610-11469][COMMON] usb: dwc3: change workqueue for connection stability

Change-Id: I8ec23741edd5c5a367e7996caf049814c389aaed
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11232] cpufreq: acme: sync cur freq with resume freq when trying to suspend

Change-Id: I517c2c6116f8ceca91ba760743349e9af7f1eaf0
Signed-off-by: Choonghoon Park <choong.park@samsung.com>
Signed-off-by: Hyunju Kang <hjtop.kang@gmail.com>

[RAMEN9610-11445][9610] wlbt : update MAC addr scheme to avoid merge conflict

Read wifi/bt addr from utag

Change-Id: I34ceefe178bdd0c3285f1f1cc0b504991ee65fbb

[RAMEN9610-11181][common][9610] wlbt: Fix kernel panic and Update to 6.60.1

1) Fix kernel panic in slsi_bt_send_frame
2) Fix memory leak in slsi_bt_send_frame
3) Rx: A-MSDU: handle alloc failure
4) fix broken HIP4 stats
5) Mac randomization through wificond
6) protect dynamic interface deletion with lock
7) delibrately panic kernel on fw panic
8) Prevent issue and Mac Randomization Fixes.
9) Claim wakelock around wlbtd netlink comms
10) Increase FW version Size to 128 bytes

Change-Id: I6af7b83548576a93e122865cec8490f42fb87264
Signed-off-by: Youngsoo <youngss.kim@samsung.com>

[RAMEN9610-10619][Common][9610] wlbt: [ACS] Rssi factor calculation issue.

Driver changes to calculate rssi factor for 2.4GHZ.

Change-Id: I3e091c379d4b2e62d51ea1e118569a5a58ea109c
SCSC-Bug-Id: SSB-47988
Signed-off-by: Himani Gupta <himani.g2@samsung.com>

[RAMEN9610-10619][Robusta2][9610] wlbt: [ACS] Driver changes

Added support for ACS in driver.

Change-Id: Iad87233b170ea488656d92665bba1172353da0ec
SCSC-Bug-Id: SSB-47573
Signed-off-by: Himani Gupta <himani.g2@samsung.com>

[RAMEN9610-10479][Robusta2][9610] IB/hfi1: convert to debugfs_file_get() and -put()

Convert all calls to the now obsolete debugfs_use_file_start() and
debugfs_use_file_finish() to the new debugfs_file_get() and
debugfs_file_put() API.

Change-Id: Ie1e7aead3bdbc674066e53b7a389993607518267
Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[RAMEN9610-10479][Robusta2][9610] wlbt: fix for kernel panic and changes for function improvement

1) generate sable tar on wifi disconnect
2) disable log collection for default
3) Memleaks and unexpected break fall through is fixed
4) Fix compile errors when various optional features disabled
5) Protect hip dereferencing
6) zero out BT/A-BOX ringbuffer on BT crash
7) Improve scsc_mx Makefile modules compatibility
8) CONTROL_ROAMING feature in FW
9) Improve collection speed
10)vif cleanup changes
11) Initialize g_spinlock lock

bugdb : REL-1633

Change-Id: Icda4e62b237e2a93251e7020c974be3bbb18b49f

[RAMEN9610-6379][9610]wlbt: change the path of wlan mac address
The address is no longer read from the partition, but from the file node

Change-Id: I3abd45f4dd44e9780d927edf038e234786e81585
Signed-off-by: avoid <bing3.lin@samsung.com>

Revert "[RAMEN9610-10521][9610] wlbt: fix for kernel panic and changes for function improvement"

This reverts commit 4a37fc74a2aef6e9f07b51da59c578c029661808.

Change-Id: I34ee87787ae3b0227d884fd11dc6d1a2594f0928

Revert "[RAMEN9610-10521] IB/hfi1: convert to debugfs_file_get() and -put()"

This reverts commit 444c51cb8ab6d30a289dad51df66a8aa29da551e.

Change-Id: I5955c0886c236dc859abbc763c03a354a305df89

Revert "[RAMEN9610-10619][Common][9610] wlbt: [ACS] Driver changes"

This reverts commit 7f2c81c9fee6e77c9284f7628c6af6bd4d0dfd49.

Change-Id: Icba6227fbe4a030a202d7af50bd49c624c9f8f95

Revert "[RAMEN9610-10619][Common][9610] wlbt: [ACS] Rssi factor calculation issue."

This reverts commit ed9173ce3a5b49984107d65d66ec758da44fbd07.

Change-Id: Id75b8ce543e86f9903065dacd876781f1e5955ae

Revert "[RAMEN9610-11181][common][9610] wlbt: Fix kernel panic and Update to 6.60.1"

This reverts commit 65f890d52b3d98df8f78df9d23ef824933aac1dc.

Change-Id: Iaeb06044ae470e9f58d8462cc7b5c506af2ae5cc

[RAMEN9610-11229][COMMON][MODAP-16187] drivers: modem_if: Deliver AP crash status to CP

- Notify AP kernel panic status to CP
- Make CP crash when ITMON is caused by CP

Change-Id: I085a013a66df9d14b204259887d1f0b6690d42ee
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>

[RAMEN9610-11229][COMMON][MODAP-16187] drivers: modem_if: change time to wait init_cmpl

- Wait 15 seconds to receive CMD_PHONE_START from CP main firmware

Change-Id: Id5f37dc3b65e45e73b98b27a391cdf4ca1a28957
Signed-off-by: Namhyung Kim <nh78.kim@samsung.com>

[RAMEN9610-11198][COMMON] drivers: exynos-pm: print MIF_REQ owners

Change-Id: Icf2bdca6576f7d7576b2a0317cbb0fb38c2c7a2a
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[RAMEN9610-11198][9610] dts: add MIF_REQ owners PMU_STAT

Change-Id: Iba4b50b4883a6e1a24aad0e947bd622044eb1108
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[RAMEN9610-11191] sched: ems: check empty of gb-list

Change-Id: I942b1f9cb43f46c3e90511c58c77a5254d45f15c
Signed-off-by: Park Bumgyu <bumgyu.park@samsung.com>

[RAMEN9610-11181][common][9610] wlbt: Fix kernel panic and Update to 6.60.1

1) Fix kernel panic in slsi_bt_send_frame
2) Fix memory leak in slsi_bt_send_frame
3) Rx: A-MSDU: handle alloc failure
4) fix broken HIP4 stats
5) Mac randomization through wificond
6) protect dynamic interface deletion with lock
7) delibrately panic kernel on fw panic
8) Prevent issue and Mac Randomization Fixes.
9) Claim wakelock around wlbtd netlink comms
10) Increase FW version Size to 128 bytes

Change-Id: I2bf6b89666ee7d122088fbe31e569260bade02ec
Signed-off-by: Youngsoo <youngss.kim@samsung.com>

[RAMEN9610-11180] PM / sleep: fix unbalanced pm_runtime_enable while aborting suspend

The device can go direct to complete at __device_suspend and
device_resume if its driver has no callbacks. In that case,
pm_runtime_enable was called at device_resume without pm_runtime_disable
at __device_suspend when suspend was aborted at __devive_suspend
because of pending wakeups. It causes unbalanced pm_runtime_enable.

Change-Id: Iceec2a72efa7a15673663828e6e692ae6958ab28
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[RAMEN9610-11169][9610] clk: samsung: modified the MUX_CLKCMU_FSYS_BUS_USER always on

Due to SSS, this clock should not be oscclk.

Change-Id: Ic6f814d02186caa7672640a6deacc0a8cfb01b4b
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[RAMEN9610-11162][COMMON] mremap: properly flush TLB before releasing the page

from eb66ae030829605d61fbef1909ce310e29f78821 upstream

Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case.  What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages".  No, mremap() obviously just _moves_ the page from one page
table location to another.

That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.

As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).

This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.

Change-Id: I02675325887cf5e1021eef310ac15567a6a21c4b
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[RAMEN9610-11162] mm: get rid of vmacache_flush_all() entirely

Jann Horn points out that the vmacache_flush_all() function is not only
potentially expensive, it's buggy too.  It also happens to be entirely
unnecessary, because the sequence number overflow case can be avoided by
simply making the sequence number be 64-bit.  That doesn't even grow the
data structures in question, because the other adjacent fields are
already 64-bit.

So simplify the whole thing by just making the sequence number overflow
case go away entirely, which gets rid of all the complications and makes
the code faster too.  Win-win.

[ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics
  also just goes away entirely with this ]

Change-Id: Iac9601279d5da67ae906712693c4e48e76e62a3c
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[RAMEN9610-11146][9610] Common: drivers: fuelgauge: fix CHARGE_COUNTER property

Change-Id: I9df77ce5a7176a79a40e2627c34b49ff980c7946
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-11143][9610] arm64: dts: fine tune gpu dvfs threshold and boosting condition

Change-Id: Ib5f4108f05bcaf43a5a55eea9b8b498ebb942e6e
Signed-off-by: Seonghun, Kim <sh_ko.kim@samsung.com>

[RAMEN9610-11098][9610] arm64: dts: change dvfs frequency and minimum table

Change-Id: If6b5989cd261c241fd214a269b3daf225e84982e
Signed-off-by: Seonghun, Kim <sh_ko.kim@samsung.com>

[RAMEN9610-11073][COMMON] ASoC: abox: change the pad retention setting

The reason for setting GPIO_MODE_DISPAUD_SYS_PWR_REG to 0 is
to make GPIO state to a specific value when powering down DISPAUD.
The default value of GPIO_MODE_DISPAUD_SYS_PWR_REG is 0,
so there is no need to set it.

Change-Id: I20832cfdaba9a2f04b0844f77e61b086b756b849
Signed-off-by: ShinHyung <s47.kang@samsung.com>

[RAMEN9610-10910][COMMON] arm64: defconfig: increase CMA memroy size

Change-Id: Ieccc3ee4a0814ddc643d273de8f8fb5753cda5ee
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-10881][9610][COMMON] dtsi: camera: remove pm property in camera devices

 - as kernel 4.14 includes pm control at sysmmu,
   duplicated pm domain property needed to removed.
   (fimc_is_sensorX, fimc_is, camerapp-gdc removed)

Change-Id: Ic51885e4dc759670909b8ca235178529a8d0417e
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>

[RAMEN9610-10895][COMMON] ASoC: abox: skip hw params fixup

If stream is active already, hw params shouldn't be changed
because H/W doesn't support runtime format change.

Change-Id: I51a8766820e565c1252c4e3f79c941d895123f54
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>

[RAMEN9610-10895][COMMON] ASoC: abox: remove GFP_KERNEL flag

GFP_ATOMIC shoudn't be used with GFP_KERNEL.

Change-Id: I5576be136b00436fe040bcd181070612e4a61601
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>

[RAMEN9610-10895][COMMON] ASoC: abox: removed memory allocation code using vzalloc function

to prevent lockup while fault hander running
removed memory allocation code

Change-Id: Id2a9fb94854804d408f88d821625801316ef12a0
Signed-off-by: Pilsun Jang <pilsun.jang@samsung.com>

[RAMEN9610-10889] fbdev: exynos: dpu: do not allow idle after dsim probe

Change-Id: I23481ed50809de5b84bebd20b9c3486c09674b8d
Signed-off-by: ChiHun Won <chihun.won@samsung.com>

[RAMEN9610-10884][COMMON] soc: cpupm: Do not allow idle util system initialization

Change-Id: Iccd6b703d564470f199375a2cfa75597973775b3
Signed-off-by: Hyunju Kang <hjtop.kang@gmail.com>

[RAMEN9610-10883][HACK] Add cc-ldoption without checking

Currently, it has problem in cc-ldoption checking logic.
So, I removed check logic temporary.

Change-Id: I9cc52d8c90da8a81c0b6c1d8ffa7c4a040f7f501
Signed-off-by: Munjoo Kim <munjoo.kim@samsung.com>

[RAMEN9610-10873][Common][9610] wlbt: scdeuled scan timing update

Scheduled scan timing update.

SCSC-Bug-Id: SSB-47291
Change-Id: I2b2346130d583c3df9178ad4354c1a21ea10aa46
Signed-off-by: Kavitha Velayutham <k.velayutham@samsung.com>

[RAMEN9610-10873][Common][9610] wlbt: Scheduled Scan Changes for Kernel 4.14.

Some new parameters have been introduced for
scheduled scan on higher kernel versions.
Hence for smooth functionality of scheduled
scan in driver, driver needs to set and
enable the newly introduced parameters as well.

Change-Id: I3ee13032fbdc4325c6fb5e5feaf309ecd56ae2b7
SCSC-Bug-Id: SSB-48178
Signed-off-by: Mohit Ghuley <mohit.ghuley@samsung.com>

[RAMEN9610-10855] android: ion: fix missing alignment for CMA heap

CMA heap may have special alignment requirement but alignment to the
buffer allocation was missing for buffer length. Alignment to the base
address is correctly performed, by the way.

Change-Id: Ida598ac599e15f825c888aaa93aa5f5e6a2f248a
Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>

[RAMEN9610-10826][9609] arm64: dtsi: modify the interactive governer clock in mali node

Change-Id: I6a486cddb97f6d0765b3d3fe1e76e475ade3eaf2
Signed-off-by: Seonghun, Kim <sh_ko.kim@samsung.com>

[RAMEN9610-10808][Common][9610] soc: samsung: cal-if: Added QCH WA of CPUCL0/1.

Change-Id: Id0e677568967c4282335c88f1cca85dc86fc030e
Signed-off-by: Jaejoon Yoo <joonyj7.yoo@samsung.com>

[RAMEN9610-10749][COMMON][MODAP-14939] drivers: modem_if: Fix Modem I/F not to acquire INT minlock

Change-Id: Iad7cfa837cbce6f347cfa6e7aa982a01122e5a5b
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>

[RAMEN9610-10619][Common][9610] wlbt: [ACS] Rssi factor calculation issue.

Driver changes to calculate rssi factor for 2.4GHZ.

Change-Id: I865c211f2a4cae268fc6dc19a9dff16960b5a50d
SCSC-Bug-Id: SSB-47988
Signed-off-by: Himani Gupta <himani.g2@samsung.com>

[RAMEN9610-10619][Common][9610] wlbt: [ACS] Driver changes

Added support for ACS in driver.

Change-Id: I94fe26c8890cd318e459cc79d15a795a2473d9ed
SCSC-Bug-Id: SSB-47573
Signed-off-by: Himani Gupta <himani.g2@samsung.com>

[RAMEN9610-10596][COMMON][MODAP-14637] drivers: modem_if: Add wake_unlock before wake_lock

Change-Id: Id6ea7021c51183f31a05d0d04b61b5f88d96e584
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>

[RAMEN9610-10593][COMMON] ASoC: abox: use non-count-based PM api in tickle

Count based API isn't needed in the tickle.

Change-Id: I1e417c55731c70b8f86551673545fc5ac01b54ff
Signed-off-by: ShinHyung <s47.kang@samsung.com>

[RAMEN9610-10593][COMMON] ASoC: abox: changed suspend sequence

Change-Id: Iabc961f2843e16f6f57b4a974209eac8c173efa8
Signed-off-by: ShinHyung <s47.kang@samsung.com>

[RAMEN9610-10585][COMMON][MODAP-14406] Modified del_timer to be excuted only when

init_timer was called

Change-Id: If5bc09dcec8f1bd2c0f74f66c4975f5d7883297a
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>

[RAMEN9610-10553][MODAP-13010][NFC] NFC Turn on, off time is slow than comparion DUT

Change-Id: Iac29279ed36d24a53bfd32ea5af49f921142972a
Signed-off-by: Wonchul Shin <wchuls.shin@samsung.com>

[RAMEN9610-10541][9610] gud: Update kinibi410A V003

Change-Id: Id55130f557a5a964b1e2968eb46e424186ce7f2a
Signed-off-by: Kim Mankyum <mankyum.kim@samsung.com>

[RAMEN9610-10538][COMMON] fbdev: dpu: tracing_mark_write function name is changed

decon_tracing_mark_write for cts test

Change-Id: I767f8d0773cdc22246f0a077de5550df9e1ae40f
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>

[RAMEN9610-10521] IB/hfi1: convert to debugfs_file_get() and -put()

Convert all calls to the now obsolete debugfs_use_file_start() and
debugfs_use_file_finish() to the new debugfs_file_get() and
debugfs_file_put() API.

Change-Id: I1bc9155930247c8b1c7d694dc93787f11242f364
Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[RAMEN9610-10521][9610] wlbt: fix for kernel panic and changes for function improvement

1) generate sable tar on wifi disconnect
2) disable log collection for default
3) Memleaks and unexpected break fall through is fixed
4) Fix compile errors when various optional features disabled
5) Protect hip dereferencing
6) zero out BT/A-BOX ringbuffer on BT crash
7) Improve scsc_mx Makefile modules compatibility
8) CONTROL_ROAMING feature in FW
9) Improve collection speed
10)vif cleanup changes
11) Initialize g_spinlock lock

bugdb : REL-1633

Change-Id: Iad9b3c652a91cd4a9164801e96cd145367f08778

[RAMEN9610-10510][9610] arm64: dts: Modify INT/INTCAM/DISP/CAM suspend frequency.

This patch modified INT/INTCAM/DISP/CAM suspend frequency.
INT 667 -> 100 MHz
INTCAM 690 -> 650 MHz
DISP 533 -> 167 MHz
CAM 690 -> 640 MHz

This patch sync to ect file.

Change-Id: I0cea2ce18ca66b525a223af96705d18b5a103b85
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[RAMEN9610-10507][9610] phy: phy driver is registered to no_callback functon

PHY driver doesn't use callback function about pm_runtime. However PHY
driver isn't registered no_callback function. So fixed it.

Change-Id: I93d642d70bb7ef02f442743b209c0b3392aa3fd2
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Signed-off-by: ChiHun Won <chihun.won@samsung.com>

[RAMEN9610-10483][9610] soc: samsung: cal-if: Updated PMUCAL data. (190107)

Change-Id: I061f765a0db55dc7f2b4fc05177c338dda8ea133
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[RAMEN9610-10495] fbdev: dpu20: modified dqe for supporting boosted in aosp colors

Change-Id: I8f87b23a646eec2c231ea08b86a4ef54e0478fa0
Signed-off-by: ChiHun Won <chihun.won@samsung.com>

[RAMEN9610-10437][9610] soc: samsung: cal-if: Updated PMUCAL data. (190104)

Added DBG_NFO register dump on sleep entry.

Change-Id: I3e68972d99a068c347de2d63da7db71cae8482d5
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[RAMEN9610-10373] gpu: make gpu_dvfs_governor_interactive function static

static keyword was removed for testing,
but was never added back.
Added back to keep in sync with latest DDK code.

Change-Id: Ia29faf6fc63f9c4c245cbfd3d972a0c3abfe5d1b
Signed-off-by: SeYeong Byeon <sy.byeon@samsung.com>