GitHub/exynos8895/android_kernel_samsung_universal8895.git
10 years agoiwlwifi: mvm: Add a missed beacons threshold
Ilan Peer [Tue, 24 Dec 2013 20:08:14 +0000 (22:08 +0200)]
iwlwifi: mvm: Add a missed beacons threshold

Instead of always calling ieee80211_beacon_loss() on every missed
beacons notification, call this function only if the number of
consecutive missed beacons from last rx is higher than a predefined
threshold.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: squash a spurious warning on chnctx change
Arik Nemtsov [Sun, 29 Dec 2013 15:57:53 +0000 (17:57 +0200)]
iwlwifi: mvm: squash a spurious warning on chnctx change

If the channel min-width changes, we can update the PHY ctx, even if
it has multiple references.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Reviewed-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: dump to debugfs the SRAM as binary
Emmanuel Grumbach [Tue, 24 Dec 2013 12:58:29 +0000 (14:58 +0200)]
iwlwifi: mvm: dump to debugfs the SRAM as binary

This allows to format it at will using external tools.
Since different teams want it in different formats, dump
the raw data and everyone can play with the data the way
they want.

While at it - make this code slightly more robust by making
the required verification on the offsets / length in the
write handler.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: BT Coex - update channel inihibition for channel 14
Emmanuel Grumbach [Tue, 24 Dec 2013 08:55:24 +0000 (10:55 +0200)]
iwlwifi: mvm: BT Coex - update channel inihibition for channel 14

This channel inhibition for channel 14 was wrong. Fix it.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: fix harmless smatch / coccinelle warnings
Emmanuel Grumbach [Sun, 22 Dec 2013 08:55:47 +0000 (10:55 +0200)]
iwlwifi: mvm: fix harmless smatch / coccinelle warnings

Don't check if mvm->fw->cs is NULL since it can't be.
cs is an array member of iwl_fw, it can't be NULL.

Use memset(ptr, 0, sizeof(*ptr)); instead of
memset(ptr, 0, sizeof(struct ptr_type));

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: disable the device as soon as RFKILL fires
Emmanuel Grumbach [Thu, 19 Dec 2013 20:20:58 +0000 (22:20 +0200)]
iwlwifi: mvm: disable the device as soon as RFKILL fires

The firmware needs to be stopped quickly (100ms) after the
RFKILL interrupt fired. Failing to do so would allow the
firmware to access the radio registers which would lead to
a hardware error.

Before this change, we would kill the firmware only when
mac80211 stops the device which can take a fair amount of
time. Take a shortcut by stopping the device right away
in the interrupt.

This is not relevant if the current firmware is INIT
firmware since that firmware can run while in RFKILL.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: allow the op_mode to call stop_device whenever it wants
Emmanuel Grumbach [Thu, 19 Dec 2013 20:19:17 +0000 (22:19 +0200)]
iwlwifi: pcie: allow the op_mode to call stop_device whenever it wants

Calling stop_device when start_fw wasn't called would issue:
Stopping tx queues that aren't allocated...

Also allow the op_mode to call stop_device and then to
disable the Tx queues - in that case just silently ignore
the disabling on the Tx queues, since the PRPH registers
aren't reachable any more.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: don't update the op_mode if rfkill hasn't changed
Emmanuel Grumbach [Sun, 22 Dec 2013 13:13:01 +0000 (15:13 +0200)]
iwlwifi: pcie: don't update the op_mode if rfkill hasn't changed

This is useless and introduces a dependency between rfkill
and stop_device - the op_mode can't call stop_device from
the rfkill notification since it would lead to an endless
recursion.
Next patches will need to do so.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: keep the NIC awake when commands are in flight
Emmanuel Grumbach [Sun, 22 Dec 2013 13:09:40 +0000 (15:09 +0200)]
iwlwifi: pcie: keep the NIC awake when commands are in flight

Under very specific circumstances, the firmware might
ignore a host command. This was debugged and we ended up
seeing that the power management hardware was faulty.
In order to workaround this issue, we keep the NIC awake
as long as we have host commands in flight. This will avoid
to put the hardware into buggy condition.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: fix possible memory leak
Eytan Lifshitz [Wed, 18 Dec 2013 21:05:06 +0000 (23:05 +0200)]
iwlwifi: mvm: fix possible memory leak

In case of invalid section_id, the function returns after
it aleready allocated memory. Fixed by change the order of actions.

Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: fix AC / FIFO mapping
Emmanuel Grumbach [Thu, 19 Dec 2013 14:50:49 +0000 (16:50 +0200)]
iwlwifi: mvm: fix AC / FIFO mapping

The AC / fifo mapping was wrong - BE packets landed in VO
FIFO. The iwl_mvm_tx_fifo enumeration isn't in the same
order as ieee80211_ac_numbers enumeration.
Since the firmware relies on fifo / ac mapping - this led
to wrong behavior. E.g. the firmware sends beacon with the
same QoS parameters as VO, and it actually took the
parameters of BK. There are probably more severe issues.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: use don't disable interrupt when rxq->lock is taken
Emmanuel Grumbach [Wed, 11 Dec 2013 08:22:28 +0000 (10:22 +0200)]
iwlwifi: pcie: use don't disable interrupt when rxq->lock is taken

This lock was never acquired in the primary interrupt
handler, but since it was acquired along with irq_lock
which had to disable interrupts, rxq->lock had to disable
interrupts too.
Now that trans_pcie->irq_lock isn't acquired in the primary
interrupt handler, rxq->lock can let interrupt enabled.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: use don't disable interrupt when irq_lock is taken
Emmanuel Grumbach [Wed, 11 Dec 2013 08:22:28 +0000 (10:22 +0200)]
iwlwifi: pcie: use don't disable interrupt when irq_lock is taken

Since we don't take this lock in the primary interrupt
handler, there is no pointin disabling the interrupt
in the critical section protected by trans_pcie->irq_lock.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: move interrupt prints to the common handler
Emmanuel Grumbach [Wed, 11 Dec 2013 07:39:30 +0000 (09:39 +0200)]
iwlwifi: pcie: move interrupt prints to the common handler

Handling interrupt with no cause and printing logs doesn't
need to be ICT / non-ICT specific move this to the common
code.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: no need to save inta in trans_pcie
Emmanuel Grumbach [Wed, 11 Dec 2013 07:24:39 +0000 (09:24 +0200)]
iwlwifi: pcie: no need to save inta in trans_pcie

This was useful when the handling was not in the same
context as the interrupt cause retrieval: we could have
several hard interrupts until the handler gets called.
Since we retrieve the interrupt cause in the handler itself,
there is no need to OR the interrupt causes.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: return inta from iwl_pcie_int_cause_{non_}ict
Emmanuel Grumbach [Wed, 11 Dec 2013 07:20:34 +0000 (09:20 +0200)]
iwlwifi: pcie: return inta from iwl_pcie_int_cause_{non_}ict

These functions are meant to return an interrupt cause and
not an irqreturn_t.
We still return IRQ_HANDLED if we had an error and IRQ_NONE
if our device hasn't fired any interrupt.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: determine the interrupt type in the handler
Emmanuel Grumbach [Wed, 11 Dec 2013 07:02:25 +0000 (09:02 +0200)]
iwlwifi: pcie: determine the interrupt type in the handler

Instead of having:
iwl_pcie_irq_handler
iwl_pcie_isr_ict
iwl_pcie_isr_non_ict

we now have:

iwl_pcie_irq_handler:
if (use_ict))
iwl_pcie_int_cause_ict;
else
iwl_pcie_int_cause_non_ict;

This is much clearer.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: read the interrupt cause from the handler
Emmanuel Grumbach [Wed, 11 Dec 2013 07:00:03 +0000 (09:00 +0200)]
iwlwifi: pcie: read the interrupt cause from the handler

We now disable the interrupts in the hardware from the
upper half and all the rest (including reading the interrupt
cause) is done in the handler.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: move the ICT / non-ICT handling functions
Emmanuel Grumbach [Mon, 9 Dec 2013 12:27:44 +0000 (14:27 +0200)]
iwlwifi: pcie: move the ICT / non-ICT handling functions

The purpose of this is to be able to call these functions
from the interrupt handler and not from the primary
interrupt handler.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: re-organize the PCIe ISR code
Emmanuel Grumbach [Mon, 9 Dec 2013 09:48:30 +0000 (11:48 +0200)]
iwlwifi: pcie: re-organize the PCIe ISR code

Separate the code that simply disables interrupt in the
hardware and the code that checks what interrupt fired.
This will be useful to move the second part in the threaded
handler which will be done in a future patch.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: track interrupt mask in SW
Emmanuel Grumbach [Mon, 9 Dec 2013 09:09:47 +0000 (11:09 +0200)]
iwlwifi: pcie: track interrupt mask in SW

Track the interrupt mask in software, making it exactly
what is configured in the interrupt mask register in the
hardware.
This allows not to access the register from the interrupt
handler. This was the case for ICT interrupt already, but
not for non-ICT interrupt.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: pcie: clean up ICT allocation code
Emmanuel Grumbach [Mon, 9 Dec 2013 07:47:46 +0000 (09:47 +0200)]
iwlwifi: pcie: clean up ICT allocation code

Since iwl_trans_pcie_alloc_ict is called in the PCIe
allocation code, we always set CSR_INT_BIT_RX_PERIODIC.
Move that bit to the default list of interrupts we enable
and simplify the code.
Also use dma_zalloc_ and avoid to memset the memory
afterwards.
trans_pcie->ict_index is 0 since trans_pcie has just been
kzalloced, remove the redundant assignment.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: fix variable shadowing
Johannes Berg [Tue, 17 Dec 2013 10:34:25 +0000 (11:34 +0100)]
iwlwifi: mvm: rs: fix variable shadowing

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: EyalX Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: fix RTS protection being set indefinitely
Eyal Shapira [Mon, 16 Dec 2013 23:08:50 +0000 (01:08 +0200)]
iwlwifi: mvm: rs: fix RTS protection being set indefinitely

RTS protection was turned on once aggregation was enabled but it
was never turned off. Remove turning on RTS protection in the LQ command
completely as TX_CMD_FLG_PROT_REQUIRE gets set in iwl_mvm_set_tx_cmd
for every Tx which is part of an aggregation. This would already cause
RTS protection to be used during aggregations.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: set highest rate in VHT MCS Set
Eyal Shapira [Thu, 12 Dec 2013 13:53:14 +0000 (15:53 +0200)]
iwlwifi: mvm: set highest rate in VHT MCS Set

Set the Tx/Rx highest long GI rates in the VHT Supported MCS Set
field according to the chip capabilties.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: disable MCS9 Tx workaround
Eyal Shapira [Wed, 11 Dec 2013 07:32:28 +0000 (09:32 +0200)]
iwlwifi: mvm: rs: disable MCS9 Tx workaround

MCS9 introduces some corner cases in the current rs
algorithm which may lead to non optimal throughput and
instability in the throughput. Until all the corner
cases are resolved disable MCS9 for Tx as a workaround
which yields better throughput results as MCS8 is much
more stable.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: Do not allow AP MAC context update if not active
Ilan Peer [Wed, 4 Dec 2013 14:47:14 +0000 (16:47 +0200)]
iwlwifi: mvm: Do not allow AP MAC context update if not active

Fix a regression introduced in "iwlwifi: mvm: fix ht protection flags"
where an AP/IBSS MAC context could have been updated even before the
context was added to the FW. This fix avoids the following warning:

WARNING: ... at .../drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c:1132
    iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]()
Changing inactive MAC 0c:8b:fd:01:1a:30/3
Modules linked in: [...]
Call Trace:
[<c16041fd>] dump_stack+0x41/0x52
[<c1041074>] warn_slowpath_common+0x84/0xa0
[<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]
[<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]
[<c1041133>] warn_slowpath_fmt+0x33/0x40
[<f80d8f45>] iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]
[<f80d517a>] iwl_mvm_bss_info_changed+0x22a/0x4b0 [iwlmvm]
[<c160831d>] ? mutex_unlock+0xd/0x10
[<f80d4678>] ? iwl_mvm_configure_filter+0x58/0x70 [iwlmvm]
[<f80d4f50>] ? iwl_mvm_mac_tx+0xc0/0xc0 [iwlmvm]
[<f8132d83>] ieee80211_bss_info_change_notify+0xa3/0x1d0 [mac80211]
[<f8149247>] ? ieee80211_del_virtual_monitor+0x127/0x1f0 [mac80211]
[<f8149cac>] ieee80211_do_open+0x12c/0xeb0 [mac80211]
[<c106c6de>] ? __raw_notifier_call_chain+0x1e/0x30
[<c106c70f>] ? raw_notifier_call_chain+0x1f/0x30
[<f814aa8d>] ieee80211_open+0x5d/0x60 [mac80211]
[<c1500c7b>] __dev_open+0xab/0x140
[<c160b39a>] ? _raw_spin_unlock_bh+0x2a/0x30
[<c1500f41>] __dev_change_flags+0x81/0x160
[<c10ab6fc>] ? __lock_is_held+0x3c/0x60
[<c15010d1>] dev_change_flags+0x21/0x60

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reported-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: fixup Makefile
Emmanuel Grumbach [Sun, 8 Dec 2013 08:48:13 +0000 (10:48 +0200)]
iwlwifi: mvm: fixup Makefile

debufs.o appeared twice in the Makefile. Fix that.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: refactor rate scale action decision
Eyal Shapira [Tue, 10 Dec 2013 22:55:36 +0000 (00:55 +0200)]
iwlwifi: mvm: rs: refactor rate scale action decision

Extract the scale action decision to a different function
in preparation of modifying it. While at it also convert
the scale action values from hardcoded values to a clear enum.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: remove unnecessary debug logs
Eyal Shapira [Tue, 10 Dec 2013 10:20:37 +0000 (12:20 +0200)]
iwlwifi: mvm: rs: remove unnecessary debug logs

The logs are emitted in a flow in which there were retries
and the rates in the rate table entry didn't match the active
or search table. This doesn't indicate a problem and is
expected in most cases where there will be retries for some
reason. Remove the logs.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: improve rates table algo
Eyal Shapira [Mon, 9 Dec 2013 11:02:56 +0000 (13:02 +0200)]
iwlwifi: mvm: rs: improve rates table algo

The new logic will attempt more rates with less retries
per rate. Also when starting off with MIMO it will
fallback to SISO with the same MCS and only then to Legacy.
Previously we fell back directly to Legacy.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: avoid recalc of supported legacy rate mask
Eyal Shapira [Mon, 9 Dec 2013 09:14:11 +0000 (11:14 +0200)]
iwlwifi: mvm: rs: avoid recalc of supported legacy rate mask

The supported legacy rate mask is initialized when rs
is initialized based on the remote peer supported rates.
There's no need to re mask it repeatedly with the supported
remote peer rates.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: refactor building the LQ command
Eyal Shapira [Wed, 4 Dec 2013 00:15:46 +0000 (02:15 +0200)]
iwlwifi: mvm: rs: refactor building the LQ command

Simplify the code a bit more by extracting the rates table
building logic into a separate function and handle setting
a fixed rate for debug in a separate flow.
Also avoid using and saving ucode rate format in different
places. Instead use rs_rate struct and convert to ucode format
only when filling the rates table in the LQ command.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: Add and examine TLV flag for P2P client uAPSD support
Alexander Bondar [Tue, 12 Nov 2013 12:47:59 +0000 (14:47 +0200)]
iwlwifi: mvm: Add and examine TLV flag for P2P client uAPSD support

Current firmware doesn't handle well uAPSD in P2P Client.
When it will be fixed, the firmware will set a TLV flag to notify
the driver that uAPSD is supported in P2P client mode.
Check this flag when sending power command for P2P client.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: trans: turn set_pmi into an optional callback
Arik Nemtsov [Thu, 5 Dec 2013 16:31:45 +0000 (18:31 +0200)]
iwlwifi: trans: turn set_pmi into an optional callback

It is not currently implemented for SDIO, and not required for other slave
buses as well.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: trans: clear FW_ERROR status in common code
Arik Nemtsov [Wed, 4 Dec 2013 15:08:47 +0000 (17:08 +0200)]
iwlwifi: trans: clear FW_ERROR status in common code

Clear the FW_ERROR status before the common start_fw transport code.
Remove the transport specific clears.

After these patches the FW_ERROR flag is only set and cleared by common
transport code.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: trans: prevent reprobe on repeated FW errors before restart
Arik Nemtsov [Sun, 1 Dec 2013 11:50:40 +0000 (13:50 +0200)]
iwlwifi: trans: prevent reprobe on repeated FW errors before restart

In case a sync command timeouts or Tx is stuck while a FW error
interrupt arrives, we might call iwl_op_mode_nic_error twice before
a restart has been initiated. This will cause a reprobe. Unify calls
to this function at the transport level and only call it on the first
FW error in a given by checking the transport FW error flag.

While at it, remove the privately defined iwl_nic_error from PCIE code
and use the common callback instead.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: check iwl_nvm_init return value
Eliad Peller [Mon, 9 Dec 2013 11:15:02 +0000 (13:15 +0200)]
iwlwifi: mvm: check iwl_nvm_init return value

iwl_nvm_init() return value wasn't checked in some
path, which resulted in the following panic (if
there was some issue with the nvm):

Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = d0460000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP
Modules linked in: iwlmvm(+) iwlwifi mac80211 cfg80211 compat [last unloaded: compat]
PC is at iwl_mvm_mac_setup_register+0x12c/0x460 [iwlmvm]
LR is at 0x2710
pc : [<bf50dd4c>]    lr : [<00002710>]    psr: 20800013
sp : d00cfe18  ip : 0000081e  fp : d006b908
r10: d0711408  r9 : bf532e64  r8 : d006b5bc
r7 : d01af000  r6 : bf39cefc  r5 : d006ab00  r4 : d006b5a4
r3 : 00000001  r2 : 00000000  r1 : d006a120  r0 : d006b860

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: remove pointer to transport from op_mode
Emmanuel Grumbach [Sun, 8 Dec 2013 08:38:20 +0000 (10:38 +0200)]
iwlwifi: remove pointer to transport from op_mode

This pointer was not used anywhere.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: rs: move rs_program_fix_rate to cleanup ifdefs
Eyal Shapira [Tue, 3 Dec 2013 16:34:52 +0000 (18:34 +0200)]
iwlwifi: mvm: rs: move rs_program_fix_rate to cleanup ifdefs

Move rs_program_fix_rate right before it's caller where we're
already in the context of an ifdef CPTCFG_MAC80211_DEBUGFS so
we can get rid of the extra ifdefs surrounding the original
location.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: trans: prevent tx and cmds during FW error
Arik Nemtsov [Sun, 1 Dec 2013 11:02:18 +0000 (13:02 +0200)]
iwlwifi: trans: prevent tx and cmds during FW error

Stop Tx and commands from arriving to the transport layer when a FW
error has occurred. A HW recovery should take place before. Remove
transport specific checks of the same nature (note that not all
transports were protected).

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: trans: use a unified transport status
Arik Nemtsov [Sun, 1 Dec 2013 10:30:38 +0000 (12:30 +0200)]
iwlwifi: trans: use a unified transport status

The same bits are employed in all transport layers. Put the status
field in the common transport layer. This allows us to employ them
in common transport code.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: trans: divide stop_hw into stop_device/op_mode_leave
Arik Nemtsov [Sun, 24 Nov 2013 17:10:46 +0000 (19:10 +0200)]
iwlwifi: trans: divide stop_hw into stop_device/op_mode_leave

The stop_hw trans callback is not well defined. It is missing in many
cleanup flows and the division of labor between stop_device/stop_hw
is cumbersome. Remove stop_hw and use stop_device to perform both.
Implement this for all current transports.

PCIE needs some extra configuration the op-mode is leaving to configure
RF kill. Expose this explicitly as a new op_mode_leave trans callback.
Take the call to stop_device outside iwl_run_mvm_init_ucode, this
makes more sense and WARN when we want to run the INIT firmware while
it has run already.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: clarify smps_requests documentation
Johannes Berg [Wed, 4 Dec 2013 10:56:58 +0000 (11:56 +0100)]
iwlwifi: mvm: clarify smps_requests documentation

The documentation for smps_requests is unclear, rewrite it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: configure phy_ctxt with min_def
Eliad Peller [Thu, 31 Oct 2013 12:31:25 +0000 (14:31 +0200)]
iwlwifi: mvm: configure phy_ctxt with min_def

Configure the phy context to the minimum required
bandwidth, given by ctx->min_def.

Tuning to a narrower bandwidth should reduce the
noise level and consume less power.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: add multicast filtering support
Eliad Peller [Thu, 28 Nov 2013 12:08:50 +0000 (14:08 +0200)]
iwlwifi: mvm: add multicast filtering support

Configure the fw to filter multicast according to
the addresses given by mac80211.

Note that bssid should be given even if we want
to pass all the multicast frames.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: move iwl_mvm_set_tx_power to PHY area
Emmanuel Grumbach [Wed, 4 Dec 2013 11:53:39 +0000 (13:53 +0200)]
iwlwifi: mvm: move iwl_mvm_set_tx_power to PHY area

This is more related to phy contexts than to mac context.
Move this function to there.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: add per-vif power debugfs hooks
Alexander Bondar [Wed, 4 Dec 2013 08:13:24 +0000 (10:13 +0200)]
iwlwifi: mvm: add per-vif power debugfs hooks

This allows to tweak the power parameters per vif.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: Enable power save on a single P2P client interface
Alexander Bondar [Mon, 2 Sep 2013 14:10:14 +0000 (17:10 +0300)]
iwlwifi: mvm: Enable power save on a single P2P client interface

Enable power save on P2P client interface only if it is the
only bound interface.
Avoid using uAPSD if P2P client is associated to GO that uses
opportunistic power save. This is due to current FW limitation.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: Disable power save for monitor interface
Alexander Bondar [Wed, 23 Oct 2013 09:50:34 +0000 (11:50 +0200)]
iwlwifi: mvm: Disable power save for monitor interface

When monitor interface is activated device power save needs
to be disabled.
Re-consider power management status on other active
interfaces when monitor interface is bound or unbound.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: Change power management dependency on multi MAC
Alexander Bondar [Tue, 27 Aug 2013 17:31:48 +0000 (20:31 +0300)]
iwlwifi: mvm: Change power management dependency on multi MAC

FW still does not support power management on multiple MAC interfaces.
Currently the driver enforce this limitation by disabling PM if second
interface is added. Change this behavior to allow PM on a single interface
even if other interfaces exist but not bound to any specific PHY.
PM will be enabled if only one single interface is bound.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: Add uAPSD misbehaving AP notification handling
Alexander Bondar [Sun, 14 Apr 2013 17:59:37 +0000 (20:59 +0300)]
iwlwifi: mvm: Add uAPSD misbehaving AP notification handling

FW implements protective algorithm to identify AP's improper uAPSD
behavior. FW sends misbehaving AP notification in this case.
Add this notification handling. Avoid using uAPSD in next association
to the exactly same AP. Refactor iwl_mvm_power_build_cmd() to move
uAPSD related code to a separate function.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: publish Tx STBC support in VHT
Eyal Shapira [Tue, 12 Nov 2013 20:40:40 +0000 (22:40 +0200)]
iwlwifi: publish Tx STBC support in VHT

If the device is MIMO and VHT capable it supports Tx STBC.
Unlike HT, any chip that supports VHT also support STBC so
no need for a config parameter.
Using num_of_ants multiple times warranted caching it.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: set VHT beamformee STS cap correctly
Eyal Shapira [Sun, 3 Nov 2013 08:04:08 +0000 (10:04 +0200)]
iwlwifi: set VHT beamformee STS cap correctly

It was set to zero which reflects support of a single STS.
Set according to the number of Rx antennas which correctly
reflects the number of STSs the STA can receive in a VHT NDP.
This improves beamforming and has been tested to improve Rx
throughput.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: publish STBC support in HT
Eyal Shapira [Tue, 12 Nov 2013 20:37:28 +0000 (22:37 +0200)]
iwlwifi: publish STBC support in HT

Not all chips support STBC so allow this to be
another config parameter per chip type. If STBC
is supported then publish it in the HT caps.

Since 7260/7265/3160 chips support it - set the stbc
support bit.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: add a generic cipher scheme support
Max Stepanov [Tue, 27 Aug 2013 16:56:13 +0000 (19:56 +0300)]
iwlwifi: mvm: add a generic cipher scheme support

This patch adds a cipher scheme support to extend a set of
the supported ciphers. The driver reads a cipher scheme list TLV
from FW image and passes it to mac80211 on hw registration.
After the cipher schemes are registered the driver handles key
installation and Tx/Rx calls related to the new ciphers.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
10 years agoiwlwifi: mvm: Add Smart FIFO support
Lilach Edelstein [Sun, 6 Oct 2013 11:03:32 +0000 (13:03 +0200)]
iwlwifi: mvm: Add Smart FIFO support

Send firmware a Smart FIFO Configuration host command to allow
interrupt coalescing. The smart FIFO is enabled when there is
only one bound interface (other than  p2p devices which are
ignored) and it is of type station, and activated while the
station is associated.

Smart Fifo allows aggragations of DMA transactions and by that
causes processor and memory controller to stay for a longer time
on lower c-states, thus saving platform power.
Firmware relies on driver to activate and disable it.

Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: don't send SMPS action frame with single RX antenna
Emmanuel Grumbach [Thu, 28 Nov 2013 13:25:21 +0000 (15:25 +0200)]
iwlwifi: mvm: don't send SMPS action frame with single RX antenna

Products that have only 1 antenna in Rx don't support MIMO
in RX. As a consequence, they will be in STATIC always.
Don't tell mac80211 to update SMPS in that case. mac80211
would send an action frame to the AP which is clearly
bogus.
As a matter of fact, we have seen that some APs send a
deauth when that happens.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: fix compilation without CONFIG_MAC80211_DEBUGFS
Emmanuel Grumbach [Tue, 3 Dec 2013 09:50:30 +0000 (11:50 +0200)]
iwlwifi: mvm: rs: fix compilation without CONFIG_MAC80211_DEBUGFS

This fixes compilation issues with CONFIG_MAC80211_DEBUGFS
not enabled.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: BT Coex - enable Sync to SCO
Emmanuel Grumbach [Thu, 28 Nov 2013 12:58:20 +0000 (14:58 +0200)]
iwlwifi: mvm: BT Coex - enable Sync to SCO

Sync to SCO is a feature that allows to synchronise the
wifi activity with the predictable BT activity in
SCO profile. This allows to reduce the collisions and
improve overall quality.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: overhaul search cycle state machine
Eyal Shapira [Sun, 24 Nov 2013 19:30:13 +0000 (21:30 +0200)]
iwlwifi: mvm: rs: overhaul search cycle state machine

Rewrite the search cycle state machine to use a more data
oriented approach where the different Tx columns (configs)
limitations and next columns to search are reprsented in
tables which are easy to change. This overhaul also includes
several major fixes:

1. Prevent going back to a specific Tx column in a search
cycle if it was already explored.

2. Avoid switching to a Tx column that doesn't have any chance
if it performs perfectly to beat the current throughput we're
getting.

These issues were degrading throughput as they were causing
switching to "bad" Tx columns.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: use the proper channel width define for legacy rate
Eyal Shapira [Thu, 28 Nov 2013 10:35:42 +0000 (12:35 +0200)]
iwlwifi: mvm: rs: use the proper channel width define for legacy rate

Use the 20Mhz channel width define instead of just the number
zero for legacy rates. Note that the define has the same value
so this is just a minor cleanup.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: fix mapping from HT/VHT rates to legacy
Eyal Shapira [Thu, 28 Nov 2013 10:27:03 +0000 (12:27 +0200)]
iwlwifi: mvm: rs: fix mapping from HT/VHT rates to legacy

The table rs_ht_to_legacy is used to get the next legacy rate
following the last HT or VHT rate in the LQ rates table.
The mapping wasn't correct as well as didn't include entries
for MCS8/9 which led to out of bounds access. This didn't
trigger a crash but led to legacy rate entries using 1Mbps
rate.
In 5Ghz this probably caused the Tx to fail completely given
that Tx attempt would have reached the legacy entries and 1Mbps
isn't valid.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: set dual_stream_ant_msk to ANT_AB always
Eyal Shapira [Thu, 28 Nov 2013 00:25:24 +0000 (02:25 +0200)]
iwlwifi: mvm: rs: set dual_stream_ant_msk to ANT_AB always

Drop code which was relevant when there were chips with
3 antennas. Setting to ANT_AB should be ok with all mvm
supported chips.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: remove unused parameter to rs_get_supported_rates
Eyal Shapira [Fri, 22 Nov 2013 23:30:44 +0000 (01:30 +0200)]
iwlwifi: mvm: rs: remove unused parameter to rs_get_supported_rates

No use of the ieee80211 header. Drop it.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: refactor to use rs_rate
Eyal Shapira [Fri, 22 Nov 2013 23:06:36 +0000 (01:06 +0200)]
iwlwifi: mvm: rs: refactor to use rs_rate

Introduce rs_rate which represents a rate. Use this structure
instead of iwl_scale_tbl_info where we're dealing with a single
rate.
This avoids allocating the big iwl_scale_tbl_info structure
on the stack in several cases like converting to ucode rate
format or from ucode rate format.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: remove unused timestamp field
Eyal Shapira [Fri, 22 Nov 2013 12:27:20 +0000 (14:27 +0200)]
iwlwifi: mvm: rs: remove unused timestamp field

Remove this as it's unused.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: increase stay in column timeout
Eyal Shapira [Fri, 22 Nov 2013 07:41:38 +0000 (09:41 +0200)]
iwlwifi: mvm: rs: increase stay in column timeout

Remain in the same Tx modulation (i.e. column) for a longer
time before starting a search cycle for a better modulation.
This has been shown to give better results.
Also change the name of the timeout define to better match its
description.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: rename thresholds defines
Eyal Shapira [Wed, 20 Nov 2013 23:18:47 +0000 (01:18 +0200)]
iwlwifi: mvm: rs: rename thresholds defines

Rename for clearer names.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: update expected TPT tables if aggregation changed
Eyal Shapira [Wed, 20 Nov 2013 23:12:11 +0000 (01:12 +0200)]
iwlwifi: mvm: rs: update expected TPT tables if aggregation changed

Expected TPT table was updated only when switching to a new
modulation. This is wrong as toggling aggregation changes
the expected TPT signficantly.
This leads to scenarios where turning aggregation on after
being in MIMO sends us back to SISO despite a perfect success
ratio.
This occurred because the TPT of the SISO mode was being
estimated based on aggregation while the MIMO one wasn't.

Also remove an error print which isn't an error anymore
since we might be updating the expected TPT table due
to aggregation changes.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: reduce min failures to end test window
Eyal Shapira [Wed, 20 Nov 2013 00:08:12 +0000 (02:08 +0200)]
iwlwifi: mvm: rs: reduce min failures to end test window

This terminates a test window of a new rate quicker in case
we've hit a bad rate and should recover better.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: rs: improve debug prints
Eyal Shapira [Tue, 19 Nov 2013 23:45:38 +0000 (01:45 +0200)]
iwlwifi: mvm: rs: improve debug prints

Enable better tracking of different decisions made
by the rate scale algorithm.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: don't configure mimo rates if nss is limited to 1
Eyal Shapira [Sat, 9 Nov 2013 21:31:38 +0000 (23:31 +0200)]
iwlwifi: mvm: don't configure mimo rates if nss is limited to 1

Remote peer can publish a different number of supported nss via the
operating mode notification IE or action frame. If it limits to 1
then we don't want mimo rates configured in the rate table.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: don't enable VHT MCS9 in 20Mhz
Eyal Shapira [Sat, 9 Nov 2013 21:25:06 +0000 (23:25 +0200)]
iwlwifi: mvm: don't enable VHT MCS9 in 20Mhz

MCS9 in NSS=1 or NSS=2 isn't valid for 20Mhz so don't enable
it in case we're dealing with a 20Mhz sta. Trying to configure an
MCS9 rate with 20Mhz in the LQ rate table would lead to a FW assert.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: stop using MIMO in case BT doesn't allow it
Eyal Shapira [Wed, 13 Nov 2013 14:46:19 +0000 (16:46 +0200)]
iwlwifi: mvm: stop using MIMO in case BT doesn't allow it

Switch to using the new btcoex decision api regarding MIMO and stop
accessing the internal btcoex structs.
In case MIMO should be disabled it would detect this upon the next
Tx and force a search. The search will switch to SISO on a antenna A
which isn't used by BT.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: quota command max_duration should be zero
Johannes Berg [Tue, 19 Nov 2013 19:36:25 +0000 (20:36 +0100)]
iwlwifi: mvm: quota command max_duration should be zero

For now, the firmware doesn't really use the field, but
it should be set to zero if there's no specific request.
Setting it to the max quota doesn't make sense.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: Implement low-priority scan
Haim Dreyfuss [Sun, 3 Nov 2013 21:02:59 +0000 (23:02 +0200)]
iwlwifi: mvm: Implement low-priority scan

Advertise driver's support for low priority scan.
Notice that this overwrites current setting by mac80211 which depends
only on hw scan support.
This scan priority  can be configured by user space application
and it affects scan continuity, low priority scan
will be more fragmented scan.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: fix scan offloading flag definition
Eliad Peller [Sun, 10 Nov 2013 10:59:46 +0000 (12:59 +0200)]
iwlwifi: mvm: fix scan offloading flag definition

Bit 0 in the scan offloading flags asks the filter
to pass all the results (instead of filtering them,
by default), rather than the other way around (like
it is defined and used today).

Fix the flag name appropriately, and fix its user.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: dump NVM from debugfs
Emmanuel Grumbach [Mon, 18 Nov 2013 15:00:03 +0000 (17:00 +0200)]
iwlwifi: mvm: dump NVM from debugfs

This allows to see the content of the NVM the driver reads.
Note that the output is in binary, and requires some
external user space tool to display the data properly.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: don't restart HW if suspending fails before D3 image is loaded
Luciano Coelho [Tue, 19 Nov 2013 20:53:41 +0000 (22:53 +0200)]
iwlwifi: mvm: don't restart HW if suspending fails before D3 image is loaded

If we haven't loaded the D3 image yet and a failure in the suspend
process occurs, we shouldn't restart the HW, because we're still
running the D0 image.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: add iwl_mvm_sta_from_mac80211
Johannes Berg [Thu, 14 Nov 2013 17:20:04 +0000 (18:20 +0100)]
iwlwifi: mvm: add iwl_mvm_sta_from_mac80211

This is just a helper function to go from the mac80211
station struct to our internal one, to later allow us
to avoid temporary 'mvmsta' variables.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: fix check for a single rx antenna
Eyal Shapira [Thu, 7 Nov 2013 17:38:04 +0000 (19:38 +0200)]
iwlwifi: fix check for a single rx antenna

valid_rx_ant is a bitmask of available antennas and not the number
of Rx antennas. Use num_of_ant and remove duplicate definitions
in both dvm and mvm.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: pcie: remove minor dead code
Michal Nazarewicz [Sun, 10 Nov 2013 19:06:37 +0000 (20:06 +0100)]
iwlwifi: pcie: remove minor dead code

inta is checked to be zero in a IRQ_NONE branch so afterwards it
cannot be zero as it is never modified.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
[reword the patch title and fix comment]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: a few more SKUs for 7260 and 3160
Emmanuel Grumbach [Wed, 23 Oct 2013 12:44:25 +0000 (15:44 +0300)]
iwlwifi: mvm: a few more SKUs for 7260 and 3160

These devices are not sold as discrete modules but are
rather soldered down to the board.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: BT Coex - fine tune the aggregation size
Emmanuel Grumbach [Wed, 13 Nov 2013 20:00:30 +0000 (22:00 +0200)]
iwlwifi: mvm: BT Coex - fine tune the aggregation size

Latest tests have shown that when BT is active and has
connections but the traffic is low, the WiFi aggregation can
be large up to 4000us without noticeable impact on BT.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: add LQ flags definitions
Eyal Shapira [Mon, 11 Nov 2013 17:56:21 +0000 (19:56 +0200)]
iwlwifi: mvm: add LQ flags definitions

Add more bit field definitions used in LQ flags.
Also rename the first bit to a shorter name.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: refactor debugfs copy_from_user()
Johannes Berg [Wed, 13 Nov 2013 08:10:21 +0000 (09:10 +0100)]
iwlwifi: mvm: refactor debugfs copy_from_user()

Abstract the copy_from_user() pattern into the macros defining
debugfs files, reducing the code and making adding new files
safer by avoiding having deal with copy_from_user() directly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: don't use void pointers in debugfs
Johannes Berg [Tue, 12 Nov 2013 16:16:38 +0000 (17:16 +0100)]
iwlwifi: mvm: don't use void pointers in debugfs

There's really no reason to use void *dbgfs_data
rather than a struct iwl_mvm *mvm, so do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: move interface-specific debugfs to a new file
Johannes Berg [Tue, 12 Nov 2013 15:58:41 +0000 (16:58 +0100)]
iwlwifi: mvm: move interface-specific debugfs to a new file

The debugfs file is getting pretty large and mixed up between
code for the hardware and code for each interface (the two
aren't even clearly separated in the code). Make it easier to
handle by splitting the per-interface code into a separate
file called debugfs-vif.c.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: small debugfs cleanups
Johannes Berg [Tue, 12 Nov 2013 15:48:03 +0000 (16:48 +0100)]
iwlwifi: mvm: small debugfs cleanups

Just clean up the code a bit, in particular
 * make all the debugfs writes follow the same pattern
   with respect to buf/buf_size variables
 * get rid of useless comments
 * check return values of all file creations
 * drop unnecessary parentheses
 * remove an unused struct definition
 * fix some whitespace

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: fix ht protection flags
Avri Altman [Tue, 12 Nov 2013 17:16:03 +0000 (19:16 +0200)]
iwlwifi: mvm: fix ht protection flags

The HT protection flags have been a mess for a long time,
this patch fixes all this.

The proper source of information for this is the
protection in the HT operation mode IE which is
propagated to bss_conf by mac80211.

1) No need to set the HT protection flags when the link
   doesn't support HT.
2) We need to set the TGG protection when ERP is active.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: allow keeping connections in d3_test
Eliad Peller [Thu, 7 Nov 2013 12:13:30 +0000 (14:13 +0200)]
iwlwifi: mvm: allow keeping connections in d3_test

Keeping connection can be useful also when testing d3
using the debugfs file (d3_test).

Save the vif to keep connection on, and consider it
when iterating over the interfaces.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: implement rate_update hook in rs
Eyal Shapira [Sat, 9 Nov 2013 21:37:55 +0000 (23:37 +0200)]
iwlwifi: mvm: implement rate_update hook in rs

Re-initialize rs when we get a rate_update hook called which
happens when remote STA changes bandwidth or sends a VHT opmode
notification.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: disconnect on disconnection wakeup event
Eliad Peller [Thu, 7 Nov 2013 12:12:09 +0000 (14:12 +0200)]
iwlwifi: mvm: disconnect on disconnection wakeup event

When waking up from d3 due to disconnection event
(e.g. because of beacon loss), we should disconnect
immediately.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: enable d3_test even if d3_test_pme_ptr is not available
Eliad Peller [Thu, 7 Nov 2013 11:23:21 +0000 (13:23 +0200)]
iwlwifi: mvm: enable d3_test even if d3_test_pme_ptr is not available

Even if d3_test_pme_ptr is not available, d3_test can still
be useful, e.g. by manually triggering resume (with ctrl-c),
and reading the wakeup reasons.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: refactor iwl_mvm_rs_rate_init
Eyal Shapira [Sat, 9 Nov 2013 20:48:56 +0000 (22:48 +0200)]
iwlwifi: mvm: refactor iwl_mvm_rs_rate_init

Refactor setting of VHT enabled rates in preparation of adding
some more logic there.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: simplify iwl_mvm_send_lq_cmd
Eyal Shapira [Fri, 8 Nov 2013 22:16:16 +0000 (00:16 +0200)]
iwlwifi: mvm: simplify iwl_mvm_send_lq_cmd

Remove the flags parameter which should be set to sync or async
according to whether this is called during sta init or not.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: fix and improve printing of rate scale table
Eyal Shapira [Sat, 9 Nov 2013 00:11:46 +0000 (02:11 +0200)]
iwlwifi: mvm: fix and improve printing of rate scale table

Info about VHT/HT rates wasn't printed properly when dumping
the rate scale table. Fix that and print more info. While at it
fix some other minor issues in the printing and prevent
overflowing the print buffer.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: pcie: remove useless condition test
Johannes Berg [Thu, 31 Oct 2013 17:30:38 +0000 (18:30 +0100)]
iwlwifi: pcie: remove useless condition test

After wait_event_timeout(), the condition must still be
true if it returns >0, in fact almost the last thing in
it is checking the condition again. It's therefore not
useful to check yet again in our code, clean it up.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: mvm: Add debugfs entry to generate NMI to NIC
Alexander Bondar [Thu, 17 Oct 2013 12:26:50 +0000 (14:26 +0200)]
iwlwifi: mvm: Add debugfs entry to generate NMI to NIC

Writting to fw_nmi entry will set DEVICE_SET_NMI_REG (0x00a01c30)
generating NMI that halts NIC CPU.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>