Grygorii Strashko [Mon, 12 Dec 2016 19:37:52 +0000 (13:37 -0600)]
usb: dwc3: omap: fix race of pm runtime with irq handler in probe
Now races can happen between interrupt handler execution and PM runtime in
error handling code path in probe and in dwc3_omap_remove() which will lead
to system crash:
in probe:
...
err1:
pm_runtime_put_sync(dev);
^^ PM runtime can race with IRQ handler when deferred probing happening
due to extcon
pm_runtime_disable(dev);
return ret;
in dwc3_omap_remove:
...
dwc3_omap_disable_irqs(omap);
^^ IRQs are disabled in HW, but handler may still run
of_platform_depopulate(omap->dev);
pm_runtime_put_sync(&pdev->dev);
^^ PM runtime can race with IRQ handler
pm_runtime_disable(&pdev->dev);
return 0;
So, OMAP DWC3 IRQ need to be disabled before calling
pm_runtime_put() in probe and in dwc3_omap_remove().
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Alan Stern [Fri, 9 Dec 2016 20:25:15 +0000 (15:25 -0500)]
USB: gadgetfs: remove unnecessary assignment
The dev_config() routine in gadgetfs has a check that
dev->dev->bNumConfigurations is equal to 1, and then contains a
redundant line of code setting the value to 1. This patch removes the
unnecessary assignment.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Alan Stern [Fri, 9 Dec 2016 20:24:24 +0000 (15:24 -0500)]
USB: gadgetfs: fix checks of wTotalLength in config descriptors
Andrey Konovalov's fuzz testing of gadgetfs showed that we should
improve the driver's checks for valid configuration descriptors passed
in by the user. In particular, the driver needs to verify that the
wTotalLength value in the descriptor is not too short (smaller
than USB_DT_CONFIG_SIZE). And the check for whether wTotalLength is
too large has to be changed, because the driver assumes there is
always enough room remaining in the buffer to hold a device descriptor
(at least USB_DT_DEVICE_SIZE bytes).
This patch adds the additional check and fixes the existing check. It
may do a little more than strictly necessary, but one extra check
won't hurt.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Andrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Alan Stern [Fri, 9 Dec 2016 20:18:43 +0000 (15:18 -0500)]
USB: gadgetfs: fix use-after-free bug
Andrey Konovalov reports that fuzz testing with syzkaller causes a
KASAN use-after-free bug report in gadgetfs:
BUG: KASAN: use-after-free in gadgetfs_setup+0x208a/0x20e0 at addr
ffff88003dfe5bf2
Read of size 2 by task syz-executor0/22994
CPU: 3 PID: 22994 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff88006df06a18 ffffffff81f96aba ffffffffe0528500 1ffff1000dbe0cd6
ffffed000dbe0cce ffff88006df068f0 0000000041b58ab3 ffffffff8598b4c8
ffffffff81f96828 1ffff1000dbe0ccd ffff88006df06708 ffff88006df06748
Call Trace:
<IRQ> [ 201.343209] [< inline >] __dump_stack lib/dump_stack.c:15
<IRQ> [ 201.343209] [<
ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51
[<
ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159
[< inline >] print_address_description mm/kasan/report.c:197
[<
ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286
[< inline >] kasan_report mm/kasan/report.c:306
[<
ffffffff817e562a>] __asan_report_load_n_noabort+0x3a/0x40 mm/kasan/report.c:337
[< inline >] config_buf drivers/usb/gadget/legacy/inode.c:1298
[<
ffffffff8322c8fa>] gadgetfs_setup+0x208a/0x20e0 drivers/usb/gadget/legacy/inode.c:1368
[<
ffffffff830fdcd0>] dummy_timer+0x11f0/0x36d0 drivers/usb/gadget/udc/dummy_hcd.c:1858
[<
ffffffff814807c1>] call_timer_fn+0x241/0x800 kernel/time/timer.c:1308
[< inline >] expire_timers kernel/time/timer.c:1348
[<
ffffffff81482de6>] __run_timers+0xa06/0xec0 kernel/time/timer.c:1641
[<
ffffffff814832c1>] run_timer_softirq+0x21/0x80 kernel/time/timer.c:1654
[<
ffffffff84f4af8b>] __do_softirq+0x2fb/0xb63 kernel/softirq.c:284
The cause of the bug is subtle. The dev_config() routine gets called
twice by the fuzzer. The first time, the user data contains both a
full-speed configuration descriptor and a high-speed config
descriptor, causing dev->hs_config to be set. But it also contains an
invalid device descriptor, so the buffer containing the descriptors is
deallocated and dev_config() returns an error.
The second time dev_config() is called, the user data contains only a
full-speed config descriptor. But dev->hs_config still has the stale
pointer remaining from the first call, causing the routine to think
that there is a valid high-speed config. Later on, when the driver
dereferences the stale pointer to copy that descriptor, we get a
use-after-free access.
The fix is simple: Clear dev->hs_config if the passed-in data does not
contain a high-speed config descriptor.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Alan Stern [Fri, 9 Dec 2016 20:17:46 +0000 (15:17 -0500)]
USB: gadgetfs: fix unbounded memory allocation bug
Andrey Konovalov reports that fuzz testing with syzkaller causes a
KASAN warning in gadgetfs:
BUG: KASAN: slab-out-of-bounds in dev_config+0x86f/0x1190 at addr
ffff88003c47e160
Write of size 65537 by task syz-executor0/6356
CPU: 3 PID: 6356 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff88003c107ad8 ffffffff81f96aba ffffffff3dc11ef0 1ffff10007820eee
ffffed0007820ee6 ffff88003dc11f00 0000000041b58ab3 ffffffff8598b4c8
ffffffff81f96828 ffffffff813fb4a0 ffff88003b6eadc0 ffff88003c107738
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<
ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51
[<
ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159
[< inline >] print_address_description mm/kasan/report.c:197
[<
ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286
[<
ffffffff817e5705>] kasan_report+0x35/0x40 mm/kasan/report.c:306
[< inline >] check_memory_region_inline mm/kasan/kasan.c:308
[<
ffffffff817e3fb9>] check_memory_region+0x139/0x190 mm/kasan/kasan.c:315
[<
ffffffff817e4044>] kasan_check_write+0x14/0x20 mm/kasan/kasan.c:326
[< inline >] copy_from_user arch/x86/include/asm/uaccess.h:689
[< inline >] ep0_write drivers/usb/gadget/legacy/inode.c:1135
[<
ffffffff83228caf>] dev_config+0x86f/0x1190 drivers/usb/gadget/legacy/inode.c:1759
[<
ffffffff817fdd55>] __vfs_write+0x5d5/0x760 fs/read_write.c:510
[<
ffffffff817ff650>] vfs_write+0x170/0x4e0 fs/read_write.c:560
[< inline >] SYSC_write fs/read_write.c:607
[<
ffffffff81803a5b>] SyS_write+0xfb/0x230 fs/read_write.c:599
[<
ffffffff84f47ec1>] entry_SYSCALL_64_fastpath+0x1f/0xc2
Indeed, there is a comment saying that the value of len is restricted
to a 16-bit integer, but the code doesn't actually do this.
This patch fixes the warning. It replaces the comment with a
computation that forces the amount of data copied from the user in
ep0_write() to be no larger than the wLength size for the control
transfer, which is a 16-bit quantity.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Baolin Wang [Thu, 8 Dec 2016 11:55:22 +0000 (19:55 +0800)]
usb: gadget: f_fs: Fix possibe deadlock
When system try to close /dev/usb-ffs/adb/ep0 on one core, at the same
time another core try to attach new UDC, which will cause deadlock as
below scenario. Thus we should release ffs lock before issuing
unregister_gadget_item().
[ 52.642225] c1 ======================================================
[ 52.642228] c1 [ INFO: possible circular locking dependency detected ]
[ 52.642236] c1 4.4.6+ #1 Tainted: G W O
[ 52.642241] c1 -------------------------------------------------------
[ 52.642245] c1 usb ffs open/2808 is trying to acquire lock:
[ 52.642270] c0 (udc_lock){+.+.+.}, at: [<
ffffffc00065aeec>]
usb_gadget_unregister_driver+0x3c/0xc8
[ 52.642272] c1 but task is already holding lock:
[ 52.642283] c0 (ffs_lock){+.+.+.}, at: [<
ffffffc00066b244>]
ffs_data_clear+0x30/0x140
[ 52.642285] c1 which lock already depends on the new lock.
[ 52.642287] c1
the existing dependency chain (in reverse order) is:
[ 52.642295] c0
-> #1 (ffs_lock){+.+.+.}:
[ 52.642307] c0 [<
ffffffc00012340c>] __lock_acquire+0x20f0/0x2238
[ 52.642314] c0 [<
ffffffc000123b54>] lock_acquire+0xe4/0x298
[ 52.642322] c0 [<
ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
[ 52.642328] c0 [<
ffffffc00066f7bc>] ffs_func_bind+0x504/0x6e8
[ 52.642334] c0 [<
ffffffc000654004>] usb_add_function+0x84/0x184
[ 52.642340] c0 [<
ffffffc000658ca4>] configfs_composite_bind+0x264/0x39c
[ 52.642346] c0 [<
ffffffc00065b348>] udc_bind_to_driver+0x58/0x11c
[ 52.642352] c0 [<
ffffffc00065b49c>] usb_udc_attach_driver+0x90/0xc8
[ 52.642358] c0 [<
ffffffc0006598e0>] gadget_dev_desc_UDC_store+0xd4/0x128
[ 52.642369] c0 [<
ffffffc0002c14e8>] configfs_write_file+0xd0/0x13c
[ 52.642376] c0 [<
ffffffc00023c054>] vfs_write+0xb8/0x214
[ 52.642381] c0 [<
ffffffc00023cad4>] SyS_write+0x54/0xb0
[ 52.642388] c0 [<
ffffffc000085ff0>] el0_svc_naked+0x24/0x28
[ 52.642395] c0
-> #0 (udc_lock){+.+.+.}:
[ 52.642401] c0 [<
ffffffc00011e3d0>] print_circular_bug+0x84/0x2e4
[ 52.642407] c0 [<
ffffffc000123454>] __lock_acquire+0x2138/0x2238
[ 52.642412] c0 [<
ffffffc000123b54>] lock_acquire+0xe4/0x298
[ 52.642420] c0 [<
ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
[ 52.642427] c0 [<
ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8
[ 52.642432] c0 [<
ffffffc00065995c>] unregister_gadget_item+0x28/0x44
[ 52.642439] c0 [<
ffffffc00066b34c>] ffs_data_clear+0x138/0x140
[ 52.642444] c0 [<
ffffffc00066b374>] ffs_data_reset+0x20/0x6c
[ 52.642450] c0 [<
ffffffc00066efd0>] ffs_data_closed+0xac/0x12c
[ 52.642454] c0 [<
ffffffc00066f070>] ffs_ep0_release+0x20/0x2c
[ 52.642460] c0 [<
ffffffc00023dbe4>] __fput+0xb0/0x1f4
[ 52.642466] c0 [<
ffffffc00023dd9c>] ____fput+0x20/0x2c
[ 52.642473] c0 [<
ffffffc0000ee944>] task_work_run+0xb4/0xe8
[ 52.642482] c0 [<
ffffffc0000cd45c>] do_exit+0x360/0xb9c
[ 52.642487] c0 [<
ffffffc0000cf228>] do_group_exit+0x4c/0xb0
[ 52.642494] c0 [<
ffffffc0000dd3c8>] get_signal+0x380/0x89c
[ 52.642501] c0 [<
ffffffc00008a8f0>] do_signal+0x154/0x518
[ 52.642507] c0 [<
ffffffc00008af00>] do_notify_resume+0x70/0x78
[ 52.642512] c0 [<
ffffffc000085ee8>] work_pending+0x1c/0x20
[ 52.642514] c1
other info that might help us debug this:
[ 52.642517] c1 Possible unsafe locking scenario:
[ 52.642518] c1 CPU0 CPU1
[ 52.642520] c1 ---- ----
[ 52.642525] c0 lock(ffs_lock);
[ 52.642529] c0 lock(udc_lock);
[ 52.642533] c0 lock(ffs_lock);
[ 52.642537] c0 lock(udc_lock);
[ 52.642539] c1
*** DEADLOCK ***
[ 52.642543] c1 1 lock held by usb ffs open/2808:
[ 52.642555] c0 #0: (ffs_lock){+.+.+.}, at: [<
ffffffc00066b244>]
ffs_data_clear+0x30/0x140
[ 52.642557] c1 stack backtrace:
[ 52.642563] c1 CPU: 1 PID: 2808 Comm: usb ffs open Tainted: G
[ 52.642565] c1 Hardware name: Spreadtrum SP9860g Board (DT)
[ 52.642568] c1 Call trace:
[ 52.642573] c1 [<
ffffffc00008b430>] dump_backtrace+0x0/0x170
[ 52.642577] c1 [<
ffffffc00008b5c0>] show_stack+0x20/0x28
[ 52.642583] c1 [<
ffffffc000422694>] dump_stack+0xa8/0xe0
[ 52.642587] c1 [<
ffffffc00011e548>] print_circular_bug+0x1fc/0x2e4
[ 52.642591] c1 [<
ffffffc000123454>] __lock_acquire+0x2138/0x2238
[ 52.642595] c1 [<
ffffffc000123b54>] lock_acquire+0xe4/0x298
[ 52.642599] c1 [<
ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
[ 52.642604] c1 [<
ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8
[ 52.642608] c1 [<
ffffffc00065995c>] unregister_gadget_item+0x28/0x44
[ 52.642613] c1 [<
ffffffc00066b34c>] ffs_data_clear+0x138/0x140
[ 52.642618] c1 [<
ffffffc00066b374>] ffs_data_reset+0x20/0x6c
[ 52.642621] c1 [<
ffffffc00066efd0>] ffs_data_closed+0xac/0x12c
[ 52.642625] c1 [<
ffffffc00066f070>] ffs_ep0_release+0x20/0x2c
[ 52.642629] c1 [<
ffffffc00023dbe4>] __fput+0xb0/0x1f4
[ 52.642633] c1 [<
ffffffc00023dd9c>] ____fput+0x20/0x2c
[ 52.642636] c1 [<
ffffffc0000ee944>] task_work_run+0xb4/0xe8
[ 52.642640] c1 [<
ffffffc0000cd45c>] do_exit+0x360/0xb9c
[ 52.642644] c1 [<
ffffffc0000cf228>] do_group_exit+0x4c/0xb0
[ 52.642647] c1 [<
ffffffc0000dd3c8>] get_signal+0x380/0x89c
[ 52.642651] c1 [<
ffffffc00008a8f0>] do_signal+0x154/0x518
[ 52.642656] c1 [<
ffffffc00008af00>] do_notify_resume+0x70/0x78
[ 52.642659] c1 [<
ffffffc000085ee8>] work_pending+0x1c/0x20
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Janusz Dziedzic [Thu, 8 Dec 2016 09:57:34 +0000 (10:57 +0100)]
usb: dwc3: skip interrupt when ep disabled
In case EP disabled pass only EPCPLT command
to be handled. In other case we could hit
Bug like below.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000003
IP:
[<
ffffffff81673428>] dwc3_thread_interrupt+0x11c8/0x1790
while dep->endpoint.desc is NULL.
Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Greg Kroah-Hartman [Tue, 6 Dec 2016 07:36:29 +0000 (08:36 +0100)]
usb: gadgetfs: restrict upper bound on device configuration size
Andrey Konovalov reported that we were not properly checking the upper
limit before of a device configuration size before calling
memdup_user(), which could cause some problems.
So set the upper limit to PAGE_SIZE * 4, which should be good enough for
all devices.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Alan Stern [Wed, 14 Dec 2016 19:55:56 +0000 (14:55 -0500)]
USB: dummy-hcd: fix bug in stop_activity (handle ep0)
The stop_activity() routine in dummy-hcd is supposed to unlink all
active requests for every endpoint, among other things. But it
doesn't handle ep0. As a result, fuzz testing can generate a WARNING
like the following:
WARNING: CPU: 0 PID: 4410 at drivers/usb/gadget/udc/dummy_hcd.c:672 dummy_free_request+0x153/0x170
Modules linked in:
CPU: 0 PID: 4410 Comm: syz-executor Not tainted 4.9.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff88006a64ed10 ffffffff81f96b8a ffffffff41b58ab3 1ffff1000d4c9d35
ffffed000d4c9d2d ffff880065f8ac00 0000000041b58ab3 ffffffff8598b510
ffffffff81f968f8 0000000041b58ab3 ffffffff859410e0 ffffffff813f0590
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<
ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51
[<
ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550
[<
ffffffff812b831c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
[<
ffffffff830fcb13>] dummy_free_request+0x153/0x170 drivers/usb/gadget/udc/dummy_hcd.c:672
[<
ffffffff830ed1b0>] usb_ep_free_request+0xc0/0x420 drivers/usb/gadget/udc/core.c:195
[<
ffffffff83225031>] gadgetfs_unbind+0x131/0x190 drivers/usb/gadget/legacy/inode.c:1612
[<
ffffffff830ebd8f>] usb_gadget_remove_driver+0x10f/0x2b0 drivers/usb/gadget/udc/core.c:1228
[<
ffffffff830ec084>] usb_gadget_unregister_driver+0x154/0x240 drivers/usb/gadget/udc/core.c:1357
This patch fixes the problem by iterating over all the endpoints in
the driver's ep array instead of iterating over the gadget's ep_list,
which explicitly leaves out ep0.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Vincent Pelletier [Thu, 15 Dec 2016 12:47:42 +0000 (12:47 +0000)]
usb: gadget: f_fs: Fix ExtCompat descriptor validation
Reserved1 is documented as expected to be set to 0, but this test fails
when it it set to 0. Reverse the condition.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Vincent Pelletier [Thu, 15 Dec 2016 12:47:41 +0000 (12:47 +0000)]
usb: gadget: f_fs: Document eventfd effect on descriptor format.
When FUNCTIONFS_EVENTFD flag is set, __ffs_data_got_descs reads a 32bits,
little-endian value right after the fixed structure header, and passes it
to eventfd_ctx_fdget. Document this.
Also, rephrase a comment to be affirmative about the role of string
descriptor at index 0. Ref: USB 2.0 spec paragraph "9.6.7 String", and
also checked to still be current in USB 3.0 spec paragraph "9.6.9 String".
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Krzysztof Opasiak [Tue, 20 Dec 2016 18:52:16 +0000 (19:52 +0100)]
usb: gadget: composite: Test get_alt() presence instead of set_alt()
By convention (according to doc) if function does not provide
get_alt() callback composite framework should assume that it has only
altsetting 0 and should respond with error if host tries to set
other one.
After commit
dd4dff8b035f ("USB: composite: Fix bug: should test
set_alt function pointer before use it")
we started checking set_alt() callback instead of get_alt().
This check is useless as we check if set_alt() is set inside
usb_add_function() and fail if it's NULL.
Let's fix this check and move comment about why we check the get
method instead of set a little bit closer to prevent future false
fixes.
Fixes:
dd4dff8b035f ("USB: composite: Fix bug: should test set_alt function pointer before use it")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Hans de Goede [Tue, 27 Dec 2016 11:13:42 +0000 (13:13 +0200)]
usb: dwc3: pci: Fix dr_mode misspelling
usb_get_dr_mode() expects the device-property to be spelled
"dr_mode" not "dr-mode".
Spelling it properly fixes the following warning showing up in dmesg:
[ 8704.500545] dwc3 dwc3.2.auto: Configuration mismatch. dr_mode forced to gadget
Signed-off-by: Hans de Goede <hdegoede@redhat.com
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Felipe Balbi [Fri, 23 Dec 2016 12:40:40 +0000 (14:40 +0200)]
usb: dwc3: core: avoid Overflow events
Now that we're handling so many transfers at a time
and for some dwc3 revisions LPM events *must* be
enabled, we can fall into a situation where too many
events fire and we start receiving Overflow events.
Let's do what XHCI does and allocate a full page for
the Event Ring, this will avoid any future issues.
Cc: <stable@vger.kernel.org> # v4.9
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Felipe Balbi [Tue, 20 Dec 2016 12:14:40 +0000 (14:14 +0200)]
usb: dwc3: gadget: always unmap EP0 requests
commit
0416e494ce7d ("usb: dwc3: ep0: correct cache
sync issue in case of ep0_bounced") introduced a bug
where we would leak DMA resources which would cause
us to starve the system of them resulting in failing
DMA transfers.
Fix the bug by making sure that we always unmap EP0
requests since those are *always* mapped.
Fixes:
0416e494ce7d ("usb: dwc3: ep0: correct cache
sync issue in case of ep0_bounced")
Cc: <stable@vger.kernel.org>
Tested-by: Tomasz Medrek <tomaszx.medrek@intel.com>
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Felipe Balbi [Tue, 20 Dec 2016 12:08:48 +0000 (14:08 +0200)]
usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()
Let's call dwc3_ep0_prepare_one_trb() explicitly
because there are occasions where we will need more
than one TRB to handle an EP0 transfer.
A follow-up patch will fix one bug related to
multiple-TRB Data Phases when it comes to
mapping/unmapping requests for DMA.
Cc: <stable@vger.kernel.org>
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Felipe Balbi [Tue, 20 Dec 2016 11:57:32 +0000 (13:57 +0200)]
usb: dwc3: ep0: add dwc3_ep0_prepare_one_trb()
For now this is just a cleanup patch, no functional
changes. We will be using the new function to fix a
bug introduced long ago by commit
0416e494ce7d
("usb: dwc3: ep0: correct cache sync issue in case
of ep0_bounced") and further worsened by commit
c0bd5456a470 ("usb: dwc3: ep0: handle non maxpacket
aligned transfers > 512")
Cc: <stable@vger.kernel.org>
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Stefan Wahren [Sun, 20 Nov 2016 21:26:05 +0000 (21:26 +0000)]
usb: dwc2: gadget: fix default value for gadget-dma-desc
The current default for gadget DMA descriptor results on bcm2835 in a
unnecessary error message:
Invalid value 1 for param gadget-dma-desc
So fix this by using hw->dma_desc_enable as default value.
Fixes:
dec4b55677e ("usb: dwc2: gadget: Add descriptor DMA parameter")
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Stefan Wahren [Sun, 20 Nov 2016 21:26:04 +0000 (21:26 +0000)]
usb: dwc2: fix default value for DMA support
The current defaults for DMA results on a non-DMA platform in a unnecessary
error message:
Invalid value 0 for param gadget-dma
So fix this by using dma_capable as default value.
Fixes:
9962b62f1be ("usb: dwc2: Deprecate g-use-dma binding")
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Stefan Wahren [Sun, 20 Nov 2016 21:26:03 +0000 (21:26 +0000)]
usb: dwc2: fix dwc2_get_device_property for u8 and u16
According to the Devicetree ePAPR [1] the datatypes u8 and u16 are
not defined. So using device_property_read_u16() would result in
a partial read of a 32-bit big-endian integer which is not intended.
So we better read the complete 32-bit value. This fixes a regression
on bcm2835 where the values for g-rx-fifo-size and g-np-tx-fifo-size
always read as zero:
Invalid value 0 for param g-rx-fifo-size
Invalid value 0 for param g-np-tx-fifo-size
[1] - http://elinux.org/images/c/cf/Power_ePAPR_APPROVED_v1.1.pdf
Fixes:
05ee799f202 ("usb: dwc2: Move gadget settings into core_params")
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Stefan Wahren [Sun, 20 Nov 2016 21:26:02 +0000 (21:26 +0000)]
usb: dwc2: Do not set host parameter in peripheral mode
Since commit "usb: dwc2: Improve handling of host and device hwparams" the
host mode specific hardware parameter aren't initialized in peripheral mode
from the register settings anymore. So we better do not set them in this
case which avoids the following warnings on bcm2835:
256 invalid for host_nperio_tx_fifo_size. Check HW configuration.
512 invalid for host_perio_tx_fifo_size. Check HW configuration.
Fixes:
55e1040e424b ("usb: dwc2: Improve handling of host and device hwparams")
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Linus Torvalds [Sun, 1 Jan 2017 22:31:53 +0000 (14:31 -0800)]
Linux 4.10-rc2
Linus Torvalds [Sun, 1 Jan 2017 20:27:05 +0000 (12:27 -0800)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull DAX updates from Dan Williams:
"The completion of Jan's DAX work for 4.10.
As I mentioned in the libnvdimm-for-4.10 pull request, these are some
final fixes for the DAX dirty-cacheline-tracking invalidation work
that was merged through the -mm, ext4, and xfs trees in -rc1. These
patches were prepared prior to the merge window, but we waited for
4.10-rc1 to have a stable merge base after all the prerequisites were
merged.
Quoting Jan on the overall changes in these patches:
"So I'd like all these 6 patches to go for rc2. The first three
patches fix invalidation of exceptional DAX entries (a bug which
is there for a long time) - without these patches data loss can
occur on power failure even though user called fsync(2). The other
three patches change locking of DAX faults so that ->iomap_begin()
is called in a more relaxed locking context and we are safe to
start a transaction there for ext4"
These have received a build success notification from the kbuild
robot, and pass the latest libnvdimm unit tests. There have not been
any -next releases since -rc1, so they have not appeared there"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ext4: Simplify DAX fault path
dax: Call ->iomap_begin without entry lock during dax fault
dax: Finish fault completely when loading holes
dax: Avoid page invalidation races and unnecessary radix tree traversals
mm: Invalidate DAX radix tree entries only if appropriate
ext2: Return BH_New buffers for zeroed blocks
Linus Torvalds [Fri, 30 Dec 2016 17:32:26 +0000 (09:32 -0800)]
Merge tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Two small fixes:
- A merge error on my part broke the DocBook build. I've
requisitioned one of tglx's frozen sharks for appropriate
disciplinary action and resolved to be more careful about testing
the DocBook stuff as long as it's still around.
- Fix an error in unaligned-memory-access.txt"
* tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux:
Documentation/unaligned-memory-access.txt: fix incorrect comparison operator
docs: Fix build failure
Linus Torvalds [Fri, 30 Dec 2016 17:29:50 +0000 (09:29 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a boot failure on some platforms when crypto self test is
enabled along with the new acomp interface"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - Use heap buffer for acomp test input
Olof Johansson [Thu, 29 Dec 2016 22:16:07 +0000 (14:16 -0800)]
mm/filemap: fix parameters to test_bit()
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte':
mm/filemap.c:933:9: error: too few arguments to function 'test_bit'
return test_bit(PG_waiters);
^~~~~~~~
Fixes:
b91e1302ad9b ('mm: optimize PageWaiters bit use for unlock_page()')
Signed-off-by: Olof Johansson <olof@lixom.net>
Brown-paper-bag-by: Linus Torvalds <dummy@duh.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 27 Dec 2016 19:40:38 +0000 (11:40 -0800)]
mm: optimize PageWaiters bit use for unlock_page()
In commit
62906027091f ("mm: add PageWaiters indicating tasks are
waiting for a page bit") Nick Piggin made our page locking no longer
unconditionally touch the hashed page waitqueue, which not only helps
performance in general, but is particularly helpful on NUMA machines
where the hashed wait queues can bounce around a lot.
However, the "clear lock bit atomically and then test the waiters bit"
sequence turns out to be much more expensive than it needs to be,
because you get a nasty stall when trying to access the same word that
just got updated atomically.
On architectures where locking is done with LL/SC, this would be trivial
to fix with a new primitive that clears one bit and tests another
atomically, but that ends up not working on x86, where the only atomic
operations that return the result end up being cmpxchg and xadd. The
atomic bit operations return the old value of the same bit we changed,
not the value of an unrelated bit.
On x86, we could put the lock bit in the high bit of the byte, and use
"xadd" with that bit (where the overflow ends up not touching other
bits), and look at the other bits of the result. However, an even
simpler model is to just use a regular atomic "and" to clear the lock
bit, and then the sign bit in eflags will indicate the resulting state
of the unrelated bit #7.
So by moving the PageWaiters bit up to bit #7, we can atomically clear
the lock bit and test the waiters bit on x86 too. And architectures
with LL/SC (which is all the usual RISC suspects), the particular bit
doesn't matter, so they are fine with this approach too.
This avoids the extra access to the same atomic word, and thus avoids
the costly stall at page unlock time.
The only downside is that the interface ends up being a bit odd and
specialized: clear a bit in a byte, and test the sign bit. Nick doesn't
love the resulting name of the new primitive, but I'd rather make the
name be descriptive and very clear about the limitation imposed by
trying to work across all relevant architectures than make it be some
generic thing that doesn't make the odd semantics explicit.
So this introduces the new architecture primitive
clear_bit_unlock_is_negative_byte();
and adds the trivial implementation for x86. We have a generic
non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)"
combination) which can be overridden by any architecture that can do
better. According to Nick, Power has the same hickup x86 has, for
example, but some other architectures may not even care.
All these optimizations mean that my page locking stress-test (which is
just executing a lot of small short-lived shell scripts: "make test" in
the git source tree) no longer makes our page locking look horribly bad.
Before all these optimizations, just the unlock_page() costs were just
over 3% of all CPU overhead on "make test". After this, it's down to
0.66%, so just a quarter of the cost it used to be.
(The difference on NUMA is bigger, but there this micro-optimization is
likely less noticeable, since the big issue on NUMA was not the accesses
to 'struct page', but the waitqueue accesses that were already removed
by Nick's earlier commit).
Acked-by: Nick Piggin <npiggin@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 28 Dec 2016 01:51:36 +0000 (17:51 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a hash corruption bug in the marvell driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
Linus Torvalds [Wed, 28 Dec 2016 00:04:37 +0000 (16:04 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar.
The most important is to not assume the packet is RX just because
the destination address matches that of the device. Such an
assumption causes problems when an interface is put into loopback
mode.
2) If we retry when creating a new tc entry (because we dropped the
RTNL mutex in order to load a module, for example) we end up with
-EAGAIN and then loop trying to replay the request. But we didn't
reset some state when looping back to the top like this, and if
another thread meanwhile inserted the same tc entry we were trying
to, we re-link it creating an enless loop in the tc chain. Fix from
Daniel Borkmann.
3) There are two different WRITE bits in the MDIO address register for
the stmmac chip, depending upon the chip variant. Due to a bug we
could set them both, fix from Hock Leong Kweh.
4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: stmmac: fix incorrect bit set in gmac4 mdio addr register
r8169: add support for RTL8168 series add-on card.
net: xdp: remove unused bfp_warn_invalid_xdp_buffer()
openvswitch: upcall: Fix vlan handling.
ipv4: Namespaceify tcp_tw_reuse knob
net: korina: Fix NAPI versus resources freeing
net, sched: fix soft lockup in tc_classify
net/mlx4_en: Fix user prio field in XDP forward
tipc: don't send FIN message from connectionless socket
ipvlan: fix multicast processing
ipvlan: fix various issues in ipvlan_process_multicast()
Cihangir Akturk [Sat, 17 Dec 2016 17:42:17 +0000 (19:42 +0200)]
Documentation/unaligned-memory-access.txt: fix incorrect comparison operator
In the actual implementation ether_addr_equal function tests for equality to 0
when returning. It seems in commit 0d74c4 it is somehow overlooked to change
this operator to reflect the actual function.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
John Brooks [Fri, 23 Dec 2016 00:53:10 +0000 (00:53 +0000)]
docs: Fix build failure
The 80211.tmpl DocBook file was removed in commit
819bf593767c ("docs-rst:
sphinxify 802.11 documentation"), but the 80211.xml target was re-added to
the Makefile by commit
7ddedebb03b7 ("ALSA: doc: ReSTize
writing-an-alsa-driver document"), leading to a failure when building the
documentation:
*** No rule to make target 'Documentation/DocBook/80211.xml', needed by
'Documentation/DocBook/80211.aux.xml'.
cc: stable@vger.kernel.org
Signed-off-by: John Brooks <john@fastquake.com>
Mea-culpa-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Tue, 27 Dec 2016 19:53:44 +0000 (12:53 -0700)]
Merge tag 'v4.10-rc1' into docs-next
Linux 4.10-rc1
Kweh, Hock Leong [Tue, 27 Dec 2016 20:07:41 +0000 (04:07 +0800)]
net: stmmac: fix incorrect bit set in gmac4 mdio addr register
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of
OR together with MII_WRITE.
Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chun-Hao Lin [Tue, 27 Dec 2016 08:29:43 +0000 (16:29 +0800)]
r8169: add support for RTL8168 series add-on card.
This chip is the same as RTL8168, but its device id is 0x8161.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 27 Dec 2016 02:49:54 +0000 (10:49 +0800)]
net: xdp: remove unused bfp_warn_invalid_xdp_buffer()
After commit
73b62bd085f4737679ea9afc7867fa5f99ba7d1b ("virtio-net:
remove the warning before XDP linearizing"), there's no users for
bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for
commit
f23bc46c30ca5ef58b8549434899fcbac41b2cfc.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
pravin shelar [Mon, 26 Dec 2016 16:31:27 +0000 (08:31 -0800)]
openvswitch: upcall: Fix vlan handling.
Networking stack accelerate vlan tag handling by
keeping topmost vlan header in skb. This works as
long as packet remains in OVS datapath. But during
OVS upcall vlan header is pushed on to the packet.
When such packet is sent back to OVS datapath, core
networking stack might not handle it correctly. Following
patch avoids this issue by accelerating the vlan tag
during flow key extract. This simplifies datapath by
bringing uniform packet processing for packets from
all code paths.
Fixes:
5108bbaddc ("openvswitch: add processing of L3 packets").
CC: Jarno Rajahalme <jarno@ovn.org>
CC: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haishuang Yan [Sun, 25 Dec 2016 06:33:16 +0000 (14:33 +0800)]
ipv4: Namespaceify tcp_tw_reuse knob
Different namespaces might have different requirements to reuse
TIME-WAIT sockets for new connections. This might be required in
cases where different namespace applications are in place which
require TIME_WAIT socket connections to be reduced independently
of the host.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laura Abbott [Wed, 21 Dec 2016 20:32:54 +0000 (12:32 -0800)]
crypto: testmgr - Use heap buffer for acomp test input
Christopher Covington reported a crash on aarch64 on recent Fedora
kernels:
kernel BUG at ./include/linux/scatterlist.h:140!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 752 Comm: cryptomgr_test Not tainted
4.9.0-11815-ge93b1cc #162
Hardware name: linux,dummy-virt (DT)
task:
ffff80007c650080 task.stack:
ffff800008910000
PC is at sg_init_one+0xa0/0xb8
LR is at sg_init_one+0x24/0xb8
...
[<
ffff000008398db8>] sg_init_one+0xa0/0xb8
[<
ffff000008350a44>] test_acomp+0x10c/0x438
[<
ffff000008350e20>] alg_test_comp+0xb0/0x118
[<
ffff00000834f28c>] alg_test+0x17c/0x2f0
[<
ffff00000834c6a4>] cryptomgr_test+0x44/0x50
[<
ffff0000080dac70>] kthread+0xf8/0x128
[<
ffff000008082ec0>] ret_from_fork+0x10/0x50
The test vectors used for input are part of the kernel image. These
inputs are passed as a buffer to sg_init_one which eventually blows up
with BUG_ON(!virt_addr_valid(buf)). On arm64, virt_addr_valid returns
false for the kernel image since virt_to_page will not return the
correct page. Fix this by copying the input vectors to heap buffer
before setting up the scatterlist.
Reported-by: Christopher Covington <cov@codeaurora.org>
Fixes:
d7db7a882deb ("crypto: acomp - update testmgr with support for acomp")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jan Kara [Fri, 21 Oct 2016 09:33:49 +0000 (11:33 +0200)]
ext4: Simplify DAX fault path
Now that dax_iomap_fault() calls ->iomap_begin() without entry lock, we
can use transaction starting in ext4_iomap_begin() and thus simplify
ext4_dax_fault(). It also provides us proper retries in case of ENOSPC.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jan Kara [Wed, 19 Oct 2016 12:34:31 +0000 (14:34 +0200)]
dax: Call ->iomap_begin without entry lock during dax fault
Currently ->iomap_begin() handler is called with entry lock held. If the
filesystem held any locks between ->iomap_begin() and ->iomap_end()
(such as ext4 which will want to hold transaction open), this would cause
lock inversion with the iomap_apply() from standard IO path which first
calls ->iomap_begin() and only then calls ->actor() callback which grabs
entry locks for DAX (if it faults when copying from/to user provided
buffers).
Fix the problem by nesting grabbing of entry lock inside ->iomap_begin()
- ->iomap_end() pair.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jan Kara [Wed, 19 Oct 2016 12:48:38 +0000 (14:48 +0200)]
dax: Finish fault completely when loading holes
The only case when we do not finish the page fault completely is when we
are loading hole pages into a radix tree. Avoid this special case and
finish the fault in that case as well inside the DAX fault handler. It
will allow us for easier iomap handling.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jan Kara [Wed, 10 Aug 2016 15:10:28 +0000 (17:10 +0200)]
dax: Avoid page invalidation races and unnecessary radix tree traversals
Currently dax_iomap_rw() takes care of invalidating page tables and
evicting hole pages from the radix tree when write(2) to the file
happens. This invalidation is only necessary when there is some block
allocation resulting from write(2). Furthermore in current place the
invalidation is racy wrt page fault instantiating a hole page just after
we have invalidated it.
So perform the page invalidation inside dax_iomap_actor() where we can
do it only when really necessary and after blocks have been allocated so
nobody will be instantiating new hole pages anymore.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jan Kara [Wed, 10 Aug 2016 15:22:44 +0000 (17:22 +0200)]
mm: Invalidate DAX radix tree entries only if appropriate
Currently invalidate_inode_pages2_range() and invalidate_mapping_pages()
just delete all exceptional radix tree entries they find. For DAX this
is not desirable as we track cache dirtiness in these entries and when
they are evicted, we may not flush caches although it is necessary. This
can for example manifest when we write to the same block both via mmap
and via write(2) (to different offsets) and fsync(2) then does not
properly flush CPU caches when modification via write(2) was the last
one.
Create appropriate DAX functions to handle invalidation of DAX entries
for invalidate_inode_pages2_range() and invalidate_mapping_pages() and
wire them up into the corresponding mm functions.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jan Kara [Wed, 10 Aug 2016 14:42:53 +0000 (16:42 +0200)]
ext2: Return BH_New buffers for zeroed blocks
So far we did not return BH_New buffers from ext2_get_blocks() when we
allocated and zeroed-out a block for DAX inode to avoid racy zeroing in
DAX code. This zeroing is gone these days so we can remove the
workaround.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Thomas Gleixner [Mon, 26 Dec 2016 21:58:20 +0000 (22:58 +0100)]
x86/mce/AMD: Make the init code more robust
If mce_device_init() fails then the mce device pointer is NULL and the
AMD mce code happily dereferences it.
Add a sanity check.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Mon, 26 Dec 2016 21:58:19 +0000 (22:58 +0100)]
smp/hotplug: Undo tglxs brainfart
The attempt to prevent overwriting an active state resulted in a
disaster which effectively disables all dynamically allocated hotplug
states.
Cleanup the mess.
Fixes:
dc280d936239 ("cpu/hotplug: Prevent overwriting of callbacks")
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Mon, 26 Dec 2016 09:10:19 +0000 (04:10 -0500)]
arm64: don't pull uaccess.h into *.S
Split asm-only parts of arm64 uaccess.h into a new header and use that
from *.S.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Florian Fainelli [Sat, 24 Dec 2016 03:56:56 +0000 (19:56 -0800)]
net: korina: Fix NAPI versus resources freeing
Commit
beb0babfb77e ("korina: disable napi on close and restart")
introduced calls to napi_disable() that were missing before,
unfortunately this leaves a small window during which NAPI has a chance
to run, yet we just freed resources since korina_free_ring() has been
called:
Fix this by disabling NAPI first then freeing resource, and make sure
that we also cancel the restart task before doing the resource freeing.
Fixes:
beb0babfb77e ("korina: disable napi on close and restart")
Reported-by: Alexandros C. Couloumbis <alex@ozo.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 21 Dec 2016 17:04:11 +0000 (18:04 +0100)]
net, sched: fix soft lockup in tc_classify
Shahar reported a soft lockup in tc_classify(), where we run into an
endless loop when walking the classifier chain due to tp->next == tp
which is a state we should never run into. The issue only seems to
trigger under load in the tc control path.
What happens is that in tc_ctl_tfilter(), thread A allocates a new
tp, initializes it, sets tp_created to 1, and calls into tp->ops->change()
with it. In that classifier callback we had to unlock/lock the rtnl
mutex and returned with -EAGAIN. One reason why we need to drop there
is, for example, that we need to request an action module to be loaded.
This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning
after we loaded and found the requested action, we need to redo the
whole request so we don't race against others. While we had to unlock
rtnl in that time, thread B's request was processed next on that CPU.
Thread B added a new tp instance successfully to the classifier chain.
When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN
and destroying its tp instance which never got linked, we goto replay
and redo A's request.
This time when walking the classifier chain in tc_ctl_tfilter() for
checking for existing tp instances we had a priority match and found
the tp instance that was created and linked by thread B. Now calling
again into tp->ops->change() with that tp was successful and returned
without error.
tp_created was never cleared in the second round, thus kernel thinks
that we need to link it into the classifier chain (once again). tp and
*back point to the same object due to the match we had earlier on. Thus
for thread B's already public tp, we reset tp->next to tp itself and
link it into the chain, which eventually causes the mentioned endless
loop in tc_classify() once a packet hits the data path.
Fix is to clear tp_created at the beginning of each request, also when
we replay it. On the paths that can cause -EAGAIN we already destroy
the original tp instance we had and on replay we really need to start
from scratch. It seems that this issue was first introduced in commit
12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining
and avoid kernel panic when we use cls_cgroup").
Fixes:
12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup")
Reported-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Tested-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 26 Dec 2016 00:13:08 +0000 (16:13 -0800)]
Linux 4.10-rc1
Larry Finger [Fri, 23 Dec 2016 03:06:53 +0000 (21:06 -0600)]
powerpc: Fix build warning on 32-bit PPC
I am getting the following warning when I build kernel 4.9-git on my
PowerBook G4 with a 32-bit PPC processor:
AS arch/powerpc/kernel/misc_32.o
arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef]
This problem is evident after commit
989cea5c14be ("kbuild: prevent
lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an
error that has been in the code since 2005 when this source file was
created. That was with commit
9994a33865f4 ("powerpc: Introduce
entry_{32,64}.S, misc_{32,64}.S, systbl.S").
The offending line does not make a lot of sense. This error does not
seem to cause any errors in the executable, thus I am not recommending
that it be applied to any stable versions.
Thanks to Nicholas Piggin for suggesting this solution.
Fixes:
9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 25 Dec 2016 22:56:58 +0000 (14:56 -0800)]
avoid spurious "may be used uninitialized" warning
The timer type simplifications caused a new gcc warning:
drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’:
drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized]
elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
despite the actual use of "time_start" not having changed in any way.
It appears that simply changing the type of ktime_t from a union to a
plain scalar type made gcc check the use.
The variable wasn't actually used uninitialized, but gcc apparently
failed to notice that the conditional around the use was exactly the
same as the conditional around the initialization of that variable.
Add an unnecessary initialization just to shut up the compiler.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 25 Dec 2016 22:30:04 +0000 (14:30 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer type cleanups from Thomas Gleixner:
"This series does a tree wide cleanup of types related to
timers/timekeeping.
- Get rid of cycles_t and use a plain u64. The type is not really
helpful and caused more confusion than clarity
- Get rid of the ktime union. The union has become useless as we use
the scalar nanoseconds storage unconditionally now. The 32bit
timespec alike storage got removed due to the Y2038 limitations
some time ago.
That leaves the odd union access around for no reason. Clean it up.
Both changes have been done with coccinelle and a small amount of
manual mopping up"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ktime: Get rid of ktime_equal()
ktime: Cleanup ktime_set() usage
ktime: Get rid of the union
clocksource: Use a plain u64 instead of cycle_t
Linus Torvalds [Sun, 25 Dec 2016 22:05:56 +0000 (14:05 -0800)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull SMP hotplug notifier removal from Thomas Gleixner:
"This is the final cleanup of the hotplug notifier infrastructure. The
series has been reintgrated in the last two days because there came a
new driver using the old infrastructure via the SCSI tree.
Summary:
- convert the last leftover drivers utilizing notifiers
- fixup for a completely broken hotplug user
- prevent setup of already used states
- removal of the notifiers
- treewide cleanup of hotplug state names
- consolidation of state space
There is a sphinx based documentation pending, but that needs review
from the documentation folks"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/armada-xp: Consolidate hotplug state space
irqchip/gic: Consolidate hotplug state space
coresight/etm3/4x: Consolidate hotplug state space
cpu/hotplug: Cleanup state names
cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions
staging/lustre/libcfs: Convert to hotplug state machine
scsi/bnx2i: Convert to hotplug state machine
scsi/bnx2fc: Convert to hotplug state machine
cpu/hotplug: Prevent overwriting of callbacks
x86/msr: Remove bogus cleanup from the error path
bus: arm-ccn: Prevent hotplug callback leak
perf/x86/intel/cstate: Prevent hotplug callback leak
ARM/imx/mmcd: Fix broken cpu hotplug handling
scsi: qedi: Convert to hotplug state machine
Linus Torvalds [Sun, 25 Dec 2016 22:01:28 +0000 (14:01 -0800)]
Merge branch 'turbostat' of git://git./linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown.
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: remove obsolete -M, -m, -C, -c options
tools/power turbostat: Make extensible via the --add parameter
tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz
tools/power turbostat: line up headers when -M is used
tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding
tools/power turbostat: Support Knights Mill (KNM)
tools/power turbostat: Display HWP OOB status
tools/power turbostat: fix Denverton BCLK
tools/power turbostat: use intel-family.h model strings
tools/power/turbostat: Add Denverton RAPL support
tools/power/turbostat: Add Denverton support
tools/power/turbostat: split core MSR support into status + limit
tools/power turbostat: fix error case overflow read of slm_freq_table[]
tools/power turbostat: Allocate correct amount of fd and irq entries
tools/power turbostat: switch to tab delimited output
tools/power turbostat: Gracefully handle ACPI S3
tools/power turbostat: tidy up output on Joule counter overflow
Nicholas Piggin [Sun, 25 Dec 2016 03:00:30 +0000 (13:00 +1000)]
mm: add PageWaiters indicating tasks are waiting for a page bit
Add a new page flag, PageWaiters, to indicate the page waitqueue has
tasks waiting. This can be tested rather than testing waitqueue_active
which requires another cacheline load.
This bit is always set when the page has tasks on page_waitqueue(page),
and is set and cleared under the waitqueue lock. It may be set when
there are no tasks on the waitqueue, which will cause a harmless extra
wakeup check that will clears the bit.
The generic bit-waitqueue infrastructure is no longer used for pages.
Instead, waitqueues are used directly with a custom key type. The
generic code was not flexible enough to have PageWaiters manipulation
under the waitqueue lock (which simplifies concurrency).
This improves the performance of page lock intensive microbenchmarks by
2-3%.
Putting two bits in the same word opens the opportunity to remove the
memory barrier between clearing the lock bit and testing the waiters
bit, after some work on the arch primitives (e.g., ensuring memory
operand widths match and cover both bits).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicholas Piggin [Sun, 25 Dec 2016 03:00:29 +0000 (13:00 +1000)]
mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBacked
A page is not added to the swap cache without being swap backed,
so PageSwapBacked mappings can use PG_owner_priv_1 for PageSwapCache.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Sun, 25 Dec 2016 11:43:07 +0000 (12:43 +0100)]
ktime: Get rid of ktime_equal()
No point in going through loops and hoops instead of just comparing the
values.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Thomas Gleixner [Sun, 25 Dec 2016 11:30:41 +0000 (12:30 +0100)]
ktime: Cleanup ktime_set() usage
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Thomas Gleixner [Sun, 25 Dec 2016 10:38:40 +0000 (11:38 +0100)]
ktime: Get rid of the union
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Thomas Gleixner [Wed, 21 Dec 2016 19:32:01 +0000 (20:32 +0100)]
clocksource: Use a plain u64 instead of cycle_t
There is no point in having an extra type for extra confusion. u64 is
unambiguous.
Conversion was done with the following coccinelle script:
@rem@
@@
-typedef u64 cycle_t;
@fix@
typedef cycle_t;
@@
-cycle_t
+u64
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Thomas Gleixner [Wed, 21 Dec 2016 19:19:57 +0000 (20:19 +0100)]
irqchip/armada-xp: Consolidate hotplug state space
The mpic is either the main interrupt controller or is cascaded behind a
GIC. The mpic is single instance and the modes are mutually exclusive, so
there is no reason to have seperate cpu hotplug states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20161221192112.333161745@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Wed, 21 Dec 2016 19:19:56 +0000 (20:19 +0100)]
irqchip/gic: Consolidate hotplug state space
Even if both drivers are compiled in only one instance can run on a given
system depending on the available GIC version.
So having seperate hotplug states for them is pointless.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192112.252416267@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Wed, 21 Dec 2016 19:19:55 +0000 (20:19 +0100)]
coresight/etm3/4x: Consolidate hotplug state space
Even if both drivers are compiled in only one instance can run on a given
system depending on the available tracer cell.
So having seperate hotplug states for them is pointless.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/20161221192112.162765484@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Wed, 21 Dec 2016 19:19:54 +0000 (20:19 +0100)]
cpu/hotplug: Cleanup state names
When the state names got added a script was used to add the extra argument
to the calls. The script basically converted the state constant to a
string, but the cleanup to convert these strings into meaningful ones did
not happen.
Replace all the useless strings with 'subsys/xxx/yyy:state' strings which
are used in all the other places already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Wed, 21 Dec 2016 19:19:53 +0000 (20:19 +0100)]
cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions
hotcpu_notifier(), cpu_notifier(), __hotcpu_notifier(), __cpu_notifier(),
register_hotcpu_notifier(), register_cpu_notifier(),
__register_hotcpu_notifier(), __register_cpu_notifier(),
unregister_hotcpu_notifier(), unregister_cpu_notifier(),
__unregister_hotcpu_notifier(), __unregister_cpu_notifier()
are unused now. Remove them and all related code.
Remove also the now pointless cpu notifier error injection mechanism. The
states can be executed step by step and error rollback is the same as cpu
down, so any state transition can be tested w/o requiring the notifier
error injection.
Some CPU hotplug states are kept as they are (ab)used for hotplug state
tracking.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161221192112.005642358@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Anna-Maria Gleixner [Wed, 21 Dec 2016 19:19:52 +0000 (20:19 +0100)]
staging/lustre/libcfs: Convert to hotplug state machine
Install the callbacks via the state machine. No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: devel@driverdev.osuosl.org
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: rt@linutronix.de
Cc: lustre-devel@lists.lustre.org
Link: http://lkml.kernel.org/r/20161202110027.htzzeervzkoc4muv@linutronix.de
Link: http://lkml.kernel.org/r/20161221192111.922872524@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sebastian Andrzej Siewior [Wed, 21 Dec 2016 19:19:51 +0000 (20:19 +0100)]
scsi/bnx2i: Convert to hotplug state machine
Install the callbacks via the state machine. No functional change.
This is the minimal fixup so we can remove the hotplug notifier mess
completely.
The real rework of this driver to use work queues is still stuck in
review/testing on the SCSI mailing list.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20161221192111.836895753@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sebastian Andrzej Siewior [Wed, 21 Dec 2016 19:19:50 +0000 (20:19 +0100)]
scsi/bnx2fc: Convert to hotplug state machine
Install the callbacks via the state machine. No functional change.
This is the minimal fixup so we can remove the hotplug notifier mess
completely.
The real rework of this driver to use work queues is still stuck in
review/testing on the SCSI mailing list.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20161221192111.757309869@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Wed, 21 Dec 2016 19:19:49 +0000 (20:19 +0100)]
cpu/hotplug: Prevent overwriting of callbacks
Developers manage to overwrite states blindly without thought. That's fatal
and hard to debug. Add sanity checks to make it fail.
This requries to restructure the code so that the dynamic state allocation
happens in the same lock protected section as the actual store. Otherwise
the previous assignment of 'Reserved' to the name field would trigger the
overwrite check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 22 Dec 2016 09:32:38 +0000 (10:32 +0100)]
x86/msr: Remove bogus cleanup from the error path
The error cleanup which is invoked when the hotplug state setup failed
tries to remove the failed state, which is broken.
Fixes:
8fba38c937cd ("x86/msr: Convert to hotplug state machine")
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Thomas Gleixner [Thu, 22 Dec 2016 10:14:06 +0000 (11:14 +0100)]
bus: arm-ccn: Prevent hotplug callback leak
In case the driver registration fails, the hotplug callback is leaked.
Not fatal, because it's never invoked as there are no instances registered,
but wrong nevertheless.
Fixes:
fdc15a36d84e ("bus/arm-ccn: Convert to hotplug statemachine")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Thomas Gleixner [Thu, 22 Dec 2016 10:02:08 +0000 (11:02 +0100)]
perf/x86/intel/cstate: Prevent hotplug callback leak
If the pmu registration fails the registered hotplug callbacks are not
removed. Wrong in any case, but fatal in case of a modular driver.
Replace the nonsensical state names with proper ones while at it.
Fixes:
77c34ef1c319 ("perf/x86/intel/cstate: Convert Intel CSTATE to hotplug state machine")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Thomas Gleixner [Wed, 21 Dec 2016 19:19:48 +0000 (20:19 +0100)]
ARM/imx/mmcd: Fix broken cpu hotplug handling
The cpu hotplug support of this perf driver is broken in several ways:
1) It adds a instance before setting up the state.
2) The state for the instance is different from the state of the
callback. It's just a randomly chosen state.
3) The instance registration is not error checked so nobody noticed that
the call can never succeed.
4) The state for the multi install callbacks is chosen randomly and
overwrites existing state. This is now prevented by the core code so the
call is guaranteed to fail.
5) The error exit path in the init function leaves the instance registered
and then frees the memory which contains the enqueued hlist node.
6) The remove function is removing the state and not the instance.
Fix it by:
- Setting up the state before adding instances. Use a dynamically allocated
state for it.
- Installing instances after the state has been set up
- Removing the instance in the error path before freeing memory
- Removing the instance not the state in the driver remove callback
While at is use raw_cpu_processor_id(), because cpu_processor_id() cannot
be used in preemptible context, and set the driver data after successful
registration of the pmu.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Frank Li <frank.li@nxp.com>
Cc: Zhengyu Shen <zhengyu.shen@nxp.com>
Link: http://lkml.kernel.org/r/20161221192111.596204211@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sat, 24 Dec 2016 11:34:02 +0000 (12:34 +0100)]
scsi: qedi: Convert to hotplug state machine
The CPU hotplug code is a trainwreck. It leaks a notifier in case of driver
registration error and the per cpu loop is racy against cpu hotplug. Aside
of that the driver should have been written and merged with the new state
machine interfaces in the first place.
Mop up the mess and Convert it to the hotplug state machine.
Signed-off-by: Thomas Grumpy Gleixner <tglx@linutronix.de>
Cc: Nilesh Javali <nilesh.javali@cavium.com>
Cc: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Cc: Chad Dupuis <chad.dupuis@cavium.com>
Cc: Saurav Kashyap <saurav.kashyap@cavium.com>
Cc: Arun Easi <arun.easi@cavium.com>
Cc: Manish Rangankar <manish.rangankar@cavium.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Len Brown [Sat, 24 Dec 2016 20:18:37 +0000 (15:18 -0500)]
tools/power turbostat: remove obsolete -M, -m, -C, -c options
The new --add option has replaced the -M, -m, -C, -c options
Eg.
-M 0x10 is now --add msr0x10,raw
-m 0x10 is now --add msr0x10,raw,u32
-C 0x10 is now --add msr0x10,delta
-c 0x10 is now --add msr0x10,delta,u32
The --add option can be repeated to add any number of counters,
while the previous options were limited to adding one of each type.
In addition, the --add option can accept a column label,
and can also display a counter as a percentage of elapsed cycles.
Eg. --add msr0x3fe,core,percent,MY_CC3
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 23 Dec 2016 04:57:55 +0000 (23:57 -0500)]
tools/power turbostat: Make extensible via the --add parameter
Create the "--add" parameter. This can be used to teach an existing
turbostat binary about any number of any type of counter.
turbostat(8) details the syntax for --add.
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sat, 24 Dec 2016 19:46:01 +0000 (11:46 -0800)]
Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 24 Dec 2016 19:37:18 +0000 (11:37 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"This ncludes various cifs/smb3 bug fixes, mostly for stable as well.
In the next week I expect that Germano will have some reconnection
fixes, and also I expect to have the remaining pieces of the snapshot
enablement and SMB3 ACLs, but wanted to get this set of bug fixes in"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs_get_root shouldn't use path with tree name
Fix default behaviour for empty domains and add domainauto option
cifs: use %16phN for formatting md5 sum
cifs: Fix smbencrypt() to stop pointing a scatterlist at the stack
CIFS: Fix a possible double locking of mutex during reconnect
CIFS: Fix a possible memory corruption during reconnect
CIFS: Fix a possible memory corruption in push locks
CIFS: Fix missing nls unload in smb2_reconnect()
CIFS: Decrease verbosity of ioctl call
SMB3: parsing for new snapshot timestamp mount parm
Linus Torvalds [Sat, 24 Dec 2016 19:27:45 +0000 (11:27 -0800)]
Merge tag 'watchdog-for-linus-v4.10' of git://git./linux/kernel/git/groeck/linux-staging
Pull watchdog updates from Wim Van Sebroeck and Guenter Roeck:
- new driver for Add Loongson1 SoC
- minor cleanup and fixes in various drivers
* tag 'watchdog-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
watchdog: it87_wdt: add IT8620E ID
watchdog: mpc8xxx: Remove unneeded linux/miscdevice.h include
watchdog: octeon: Remove unneeded linux/miscdevice.h include
watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
watchdog: loongson1: Add Loongson1 SoC watchdog driver
watchdog: cpwd: remove memory allocate failure message
watchdog: da9062/61: watchdog driver
intel-mid_wdt: Error code is just an integer
intel-mid_wdt: make sure watchdog is not running at startup
watchdog: mei_wdt: request stop on reboot to prevent false positive event
watchdog: hpwdt: changed maintainer information
watchdog: jz4740: Fix modular build
watchdog: qcom: fix kernel panic due to external abort on non-linefetch
watchdog: davinci: add support for deferred probing
watchdog: meson: Remove unneeded platform MODULE_ALIAS
watchdog: Standardize leading tabs and spaces in Kconfig file
watchdog: max77620_wdt: fix module autoload
watchdog: bcm7038_wdt: fix module autoload
Linus Torvalds [Sat, 24 Dec 2016 19:23:24 +0000 (11:23 -0800)]
Merge tag 'ntb-4.10' of git://github.com/jonmason/ntb
Pull NTB update from Jon Mason:
- NTB bug fixes for removing an unnecessary call to ntb_peer_spad_read,
and correcting a free_irq inconsistency
- add Intel SKX support
- change the AMD NTB maintainer, and fix some bugs present there
* tag 'ntb-4.10' of git://github.com/jonmason/ntb:
ntb_transport: Remove unnecessary call to ntb_peer_spad_read
NTB: Fix 'request_irq()' and 'free_irq()' inconsistancy
ntb: fix SKX NTB config space size register offsets
NTB: correct ntb_peer_spad_read for case when callback is not supplied.
MAINTAINERS: Change in maintainer for AMD NTB
ntb_transport: Limit memory windows based on available, scratchpads
NTB: Register and offset values fix for memory window
NTB: add support for hotplug feature
ntb: Adding Skylake Xeon NTB support
Linus Torvalds [Sat, 24 Dec 2016 00:54:46 +0000 (16:54 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"There's a number of fixes:
- a round of fixes for CPUID-less legacy CPUs
- a number of microcode loader fixes
- i8042 detection robustization fixes
- stack dump/unwinder fixes
- x86 SoC platform driver fixes
- a GCC 7 warning fix
- virtualization related fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
Revert "x86/unwind: Detect bad stack return address"
x86/paravirt: Mark unused patch_default label
x86/microcode/AMD: Reload proper initrd start address
x86/platform/intel/quark: Add printf attribute to imr_self_test_result()
x86/platform/intel-mid: Switch MPU3050 driver to IIO
x86/alternatives: Do not use sync_core() to serialize I$
x86/topology: Document cpu_llc_id
x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic
x86/asm: Rewrite sync_core() to use IRET-to-self
x86/microcode/intel: Replace sync_core() with native_cpuid()
Revert "x86/boot: Fail the boot if !M486 and CPUID is missing"
x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels
x86/cpu: Probe CPUID leaf 6 even when cpuid_level == 6
x86/tools: Fix gcc-7 warning in relocs.c
x86/unwind: Dump stack data on warnings
x86/unwind: Adjust last frame check for aligned function stacks
x86/init: Fix a couple of comment typos
x86/init: Remove i8042_detect() from platform ops
Input: i8042 - Trust firmware a bit more when probing on X86
x86/init: Add i8042 state to the platform data
...
Linus Torvalds [Sat, 24 Dec 2016 00:51:16 +0000 (16:51 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"ARM/MOXA SoC clocksource driver fixes"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/moxart: Plug memory and mapping leaks
Linus Torvalds [Sat, 24 Dec 2016 00:49:12 +0000 (16:49 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"On the kernel side there's two x86 PMU driver fixes and a uprobes fix,
plus on the tooling side there's a number of fixes and some late
updates"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf sched timehist: Fix invalid period calculation
perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
perf sched timehist: Enlarge default 'comm_width'
perf sched timehist: Honour 'comm_width' when aligning the headers
perf/x86: Fix overlap counter scheduling bug
perf/x86/pebs: Fix handling of PEBS buffer overflows
samples/bpf: Move open_raw_sock to separate header
samples/bpf: Remove perf_event_open() declaration
samples/bpf: Be consistent with bpf_load_program bpf_insn parameter
tools lib bpf: Add bpf_prog_{attach,detach}
samples/bpf: Switch over to libbpf
perf diff: Do not overwrite valid build id
perf annotate: Don't throw error for zero length symbols
perf bench futex: Fix lock-pi help string
perf trace: Check if MAP_32BIT is defined (again)
samples/bpf: Make perf_event_read() static
uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation
samples/bpf: Make samples more libbpf-centric
tools lib bpf: Add flags to bpf_create_map()
tools lib bpf: use __u32 from linux/types.h
...
Linus Torvalds [Sat, 24 Dec 2016 00:47:25 +0000 (16:47 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A build warning fix with certain .config's"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/st: Mark st_irq_syscfg_resume() __maybe_unused
Tariq Toukan [Thu, 22 Dec 2016 12:32:58 +0000 (14:32 +0200)]
net/mlx4_en: Fix user prio field in XDP forward
The user prio field is wrong (and overflows) in the XDP forward
flow.
This is a result of a bad value for num_tx_rings_p_up, which should
account all XDP TX rings, as they operate for the same user prio.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 22 Dec 2016 12:22:29 +0000 (07:22 -0500)]
tipc: don't send FIN message from connectionless socket
In commit
6f00089c7372 ("tipc: remove SS_DISCONNECTING state") the
check for socket type is in the wrong place, causing a closing socket
to always send out a FIN message even when the socket was never
connected. This is normally harmless, since the destination node for
such messages most often is zero, and the message will be dropped, but
it is still a wrong and confusing behavior.
We fix this in this commit.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Thu, 22 Dec 2016 01:30:16 +0000 (17:30 -0800)]
ipvlan: fix multicast processing
In an IPvlan setup when master is set in loopback mode e.g.
ethtool -K eth0 set loopback on
where eth0 is master device for IPvlan setup.
The failure is caused by the faulty logic that determines if the
packet is from TX-path vs. RX-path by just looking at the mac-
addresses on the packet while processing multicast packets.
In the loopback-mode where this crash was happening, the packets
that are sent out are reflected by the NIC and are processed on
the RX path, but mac-address check tricks into thinking this
packet is from TX path and falsely uses dev_forward_skb() to pass
packets to the slave (virtual) devices.
This patch records the path while queueing packets and eliminates
logic of looking at mac-addresses for the same decision.
------------[ cut here ]------------
kernel BUG at include/linux/skbuff.h:1737!
Call Trace:
[<
ffffffff921fbbc2>] dev_forward_skb+0x92/0xd0
[<
ffffffffc031ac65>] ipvlan_process_multicast+0x395/0x4c0 [ipvlan]
[<
ffffffffc031a9a7>] ? ipvlan_process_multicast+0xd7/0x4c0 [ipvlan]
[<
ffffffff91cdfea7>] ? process_one_work+0x147/0x660
[<
ffffffff91cdff09>] process_one_work+0x1a9/0x660
[<
ffffffff91cdfea7>] ? process_one_work+0x147/0x660
[<
ffffffff91ce086d>] worker_thread+0x11d/0x360
[<
ffffffff91ce0750>] ? rescuer_thread+0x350/0x350
[<
ffffffff91ce960b>] kthread+0xdb/0xe0
[<
ffffffff91c05c70>] ? _raw_spin_unlock_irq+0x30/0x50
[<
ffffffff91ce9530>] ? flush_kthread_worker+0xc0/0xc0
[<
ffffffff92348b7a>] ret_from_fork+0x9a/0xd0
[<
ffffffff91ce9530>] ? flush_kthread_worker+0xc0/0xc0
Fixes:
ba35f8588f47 ("ipvlan: Defer multicast / broadcast processing to a work-queue")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 22 Dec 2016 02:00:24 +0000 (18:00 -0800)]
ipvlan: fix various issues in ipvlan_process_multicast()
1) netif_rx() / dev_forward_skb() should not be called from process
context.
2) ipvlan_count_rx() should be called with preemption disabled.
3) We should check if ipvlan->dev is up before feeding packets
to netif_rx()
4) We need to prevent device from disappearing if some packets
are in the multicast backlog.
5) One kfree_skb() should be a consume_skb() eventually
Fixes:
ba35f8588f47 ("ipvlan: Defer multicast / broadcast processing to
a work-queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Wahl [Wed, 21 Dec 2016 16:45:22 +0000 (11:45 -0500)]
ntb_transport: Remove unnecessary call to ntb_peer_spad_read
The results were previously ignored, anyway.
Signed-off-by: Steve Wahl <Steve.Wahl@dell.com>
Fixes:
e26a5843f7f5014ae4460030ca4de029a3ac35d3
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Christophe JAILLET [Mon, 19 Dec 2016 05:52:55 +0000 (06:52 +0100)]
NTB: Fix 'request_irq()' and 'free_irq()' inconsistancy
'request_irq()' and 'free_irq()' should have the same 'dev_id'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Dave Jiang [Tue, 13 Dec 2016 16:03:13 +0000 (09:03 -0700)]
ntb: fix SKX NTB config space size register offsets
The offsets for the SZ registers are wrong. Updated.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Sandeep Mann <sandeep@purestorage.com>
Tested-by: Zachary Ross <zacharyx.ross@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Steven Wahl [Thu, 8 Dec 2016 17:02:28 +0000 (17:02 +0000)]
NTB: correct ntb_peer_spad_read for case when callback is not supplied.
Correct ntb_peer_spad_read for case when callback is not supplied
Signed-off-by: Steve Wahl <Steve.Wahl@dell.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Shyam Sundar S K [Wed, 7 Dec 2016 17:18:39 +0000 (22:48 +0530)]
MAINTAINERS: Change in maintainer for AMD NTB
I would like to take maintainership for AMD NTB
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Shyam Sundar S K [Wed, 7 Dec 2016 17:07:05 +0000 (22:37 +0530)]
ntb_transport: Limit memory windows based on available, scratchpads
When the underlying NTB H/W driver advertises more memory windows
than the number of scratchpads available to setup MW's, it is likely
that we may end up filling the remaining memory windows with garbage.
So to avoid that, lets limit the memory windows that transport driver
can setup based on the available scratchpads.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Shyam Sundar S K [Thu, 1 Dec 2016 19:14:28 +0000 (00:44 +0530)]
NTB: Register and offset values fix for memory window
Due to incorrect limit and translation register values, NTB link was
going down when the memory window was setup. Made appropriate changes
as per spec.
Fix limit register values for BAR1, which was overlapping
with the BAR23 address.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Xiangliang Yu [Fri, 18 Nov 2016 09:21:41 +0000 (14:51 +0530)]
NTB: add support for hotplug feature
AMD NTB support hotplug under B2B mode. NTB will trigger link
up/down interrupt event when doing plug add/remove, this patch
implements the two interrupt event to support B2B hotplug function.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Dave Jiang [Wed, 16 Nov 2016 21:03:38 +0000 (14:03 -0700)]
ntb: Adding Skylake Xeon NTB support
The Skylake Xeon NTB hardware has made some changes to the register name,
offset, and the way doorbells work. Adding driver support for the new
hardware.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Josh Poimboeuf [Thu, 22 Dec 2016 15:02:49 +0000 (09:02 -0600)]
Revert "x86/unwind: Detect bad stack return address"
Revert the following commit:
b6959a362177 ("x86/unwind: Detect bad stack return address")
... because Andrey Konovalov reported an unwinder warning:
WARNING: unrecognized kernel stack return address
ffffffffa0000001 at
ffff88006377fa18 in a.out:4467
The unwind was initiated from an interrupt which occurred while running in the
generated code for a kprobe. The unwinder printed the warning because it
expected regs->ip to point to a valid text address, but instead it pointed to
the generated code.
Eventually we may want come up with a way to identify generated kprobe
code so the unwinder can know that it's a valid return address. Until
then, just remove the warning.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/02f296848fbf49fb72dfeea706413ecbd9d4caf6.1482418739.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 23 Dec 2016 19:23:29 +0000 (20:23 +0100)]
Merge tag 'perf-urgent-for-mingo-
20161222' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
Fixes for 'perf sched timehist': (Namhyung Kim)
- Define a larger initial alignment value for the COMM column and
make it be more consistently honoured, for instance in the header.
- Fix invalid period calculation when using the --time option to
select a time slice, when events outside that slice were being
considered for the per cpu idle stats summary.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log