mm: fix race between MADV_FREE reclaim and blkdev direct IO read

commit 6c8e2a256915a223f6289f651d6b926cd7135c9e upstream.

Problem:
=======

Userspace might read the zero-page instead of actual data from a direct IO
read on a block device if the buffers have been called madvise(MADV_FREE)
on earlier (this is discussed below) due to a race between page reclaim on
MADV_FREE and blkdev direct IO read.

- Race condition:
  ==============

During page reclaim, the MADV_FREE page check in try_to_unmap_one() checks
if the page is not dirty, then discards its rmap PTE(s) (vs.  remap back
if the page is dirty).

However, after try_to_unmap_one() returns to shrink_page_list(), it might
keep the page _anyway_ if page_ref_freeze() fails (it expects exactly
_one_ page reference, from the isolation for page reclaim).

Well, blkdev_direct_IO() gets references for all pages, and on READ
operations it only sets them dirty _later_.

So, if MADV_FREE'd pages (i.e., not dirty) are used as buffers for direct
IO read from block devices, and page reclaim happens during
__blkdev_direct_IO[_simple]() exactly AFTER bio_iov_iter_get_pages()
returns, but BEFORE the pages are set dirty, the situation happens.

The direct IO read eventually completes.  Now, when userspace reads the
buffers, the PTE is no longer there and the page fault handler
do_anonymous_page() services that with the zero-page, NOT the data!

A synthetic reproducer is provided.

- Page faults:
  ===========

If page reclaim happens BEFORE bio_iov_iter_get_pages() the issue doesn't
happen, because that faults-in all pages as writeable, so
do_anonymous_page() sets up a new page/rmap/PTE, and that is used by
direct IO.  The userspace reads don't fault as the PTE is there (thus
zero-page is not used/setup).

But if page reclaim happens AFTER it / BEFORE setting pages dirty, the PTE
is no longer there; the subsequent page faults can't help:

The data-read from the block device probably won't generate faults due to
DMA (no MMU) but even in the case it wouldn't use DMA, that happens on
different virtual addresses (not user-mapped addresses) because `struct
bio_vec` stores `struct page` to figure addresses out (which are different
from user-mapped addresses) for the read.

Thus userspace reads (to user-mapped addresses) still fault, then
do_anonymous_page() gets another `struct page` that would address/ map to
other memory than the `struct page` used by `struct bio_vec` for the read.
(The original `struct page` is not available, since it wasn't freed, as
page_ref_freeze() failed due to more page refs.  And even if it were
available, its data cannot be trusted anymore.)

Solution:
========

One solution is to check for the expected page reference count in
try_to_unmap_one().

There should be one reference from the isolation (that is also checked in
shrink_page_list() with page_ref_freeze()) plus one or more references
from page mapping(s) (put in discard: label).  Further references mean
that rmap/PTE cannot be unmapped/nuked.

(Note: there might be more than one reference from mapping due to
fork()/clone() without CLONE_VM, which use the same `struct page` for
references, until the copy-on-write page gets copied.)

So, additional page references (e.g., from direct IO read) now prevent the
rmap/PTE from being unmapped/dropped; similarly to the page is not freed
per shrink_page_list()/page_ref_freeze()).

- Races and Barriers:
  ==================

The new check in try_to_unmap_one() should be safe in races with
bio_iov_iter_get_pages() in get_user_pages() fast and slow paths, as it's
done under the PTE lock.

The fast path doesn't take the lock, but it checks if the PTE has changed
and if so, it drops the reference and leaves the page for the slow path
(which does take that lock).

The fast path requires synchronization w/ full memory barrier: it writes
the page reference count first then it reads the PTE later, while
try_to_unmap() writes PTE first then it reads page refcount.

And a second barrier is needed, as the page dirty flag should not be read
before the page reference count (as in __remove_mapping()).  (This can be
a load memory barrier only; no writes are involved.)

Call stack/comments:

- try_to_unmap_one()
  - page_vma_mapped_walk()
    - map_pte() # see pte_offset_map_lock():
        pte_offset_map()
        spin_lock()

  - ptep_get_and_clear() # write PTE
  - smp_mb() # (new barrier) GUP fast path
  - page_ref_count() # (new check) read refcount

  - page_vma_mapped_walk_done() # see pte_unmap_unlock():
      pte_unmap()
      spin_unlock()

- bio_iov_iter_get_pages()
  - __bio_iov_iter_get_pages()
    - iov_iter_get_pages()
      - get_user_pages_fast()
        - internal_get_user_pages_fast()

          # fast path
          - lockless_pages_from_mm()
            - gup_{pgd,p4d,pud,pmd,pte}_range()
                ptep = pte_offset_map() # not _lock()
                pte = ptep_get_lockless(ptep)

                page = pte_page(pte)
                try_grab_compound_head(page) # inc refcount
                                             # (RMW/barrier
                                              #  on success)

                if (pte_val(pte) != pte_val(*ptep)) # read PTE
                        put_compound_head(page) # dec refcount
                         # go slow path

          # slow path
          - __gup_longterm_unlocked()
            - get_user_pages_unlocked()
              - __get_user_pages_locked()
                - __get_user_pages()
                  - follow_{page,p4d,pud,pmd}_mask()
                    - follow_page_pte()
                        ptep = pte_offset_map_lock()
                        pte = *ptep
                        page = vm_normal_page(pte)
                        try_grab_page(page) # inc refcount
                        pte_unmap_unlock()

- Huge Pages:
  ==========

Regarding transparent hugepages, that logic shouldn't change, as MADV_FREE
(aka lazyfree) pages are PageAnon() && !PageSwapBacked()
(madvise_free_pte_range() -> mark_page_lazyfree() -> lru_lazyfree_fn())
thus should reach shrink_page_list() -> split_huge_page_to_list() before
try_to_unmap[_one](), so it deals with normal pages only.

(And in case unlikely/TTU_SPLIT_HUGE_PMD/split_huge_pmd_address() happens,
which should not or be rare, the page refcount should be greater than
mapcount: the head page is referenced by tail pages.  That also prevents
checking the head `page` then incorrectly call page_remove_rmap(subpage)
for a tail page, that isn't even in the shrink_page_list()'s page_list (an
effect of split huge pmd/pmvw), as it might happen today in this unlikely
scenario.)

MADV_FREE'd buffers:
===================

So, back to the "if MADV_FREE pages are used as buffers" note.  The case
is arguable, and subject to multiple interpretations.

The madvise(2) manual page on the MADV_FREE advice value says:

1) 'After a successful MADV_FREE ... data will be lost when
   the kernel frees the pages.'
2) 'the free operation will be canceled if the caller writes
   into the page' / 'subsequent writes ... will succeed and
   then [the] kernel cannot free those dirtied pages'
3) 'If there is no subsequent write, the kernel can free the
   pages at any time.'

Thoughts, questions, considerations... respectively:

1) Since the kernel didn't actually free the page (page_ref_freeze()
   failed), should the data not have been lost? (on userspace read.)
2) Should writes performed by the direct IO read be able to cancel
   the free operation?
   - Should the direct IO read be considered as 'the caller' too,
     as it's been requested by 'the caller'?
   - Should the bio technique to dirty pages on return to userspace
     (bio_check_pages_dirty() is called/used by __blkdev_direct_IO())
     be considered in another/special way here?
3) Should an upcoming write from a previously requested direct IO
   read be considered as a subsequent write, so the kernel should
   not free the pages? (as it's known at the time of page reclaim.)

And lastly:

Technically, the last point would seem a reasonable consideration and
balance, as the madvise(2) manual page apparently (and fairly) seem to
assume that 'writes' are memory access from the userspace process (not
explicitly considering writes from the kernel or its corner cases; again,
fairly)..  plus the kernel fix implementation for the corner case of the
largely 'non-atomic write' encompassed by a direct IO read operation, is
relatively simple; and it helps.

Reproducer:
==========

@ test.c (simplified, but works)

#define _GNU_SOURCE
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>

int main() {
int fd, i;
char *buf;

fd = open(DEV, O_RDONLY | O_DIRECT);

buf = mmap(NULL, BUF_SIZE, PROT_READ | PROT_WRITE,
                    MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);

for (i = 0; i < BUF_SIZE; i += PAGE_SIZE)
buf[i] = 1; // init to non-zero

madvise(buf, BUF_SIZE, MADV_FREE);

read(fd, buf, BUF_SIZE);

for (i = 0; i < BUF_SIZE; i += PAGE_SIZE)
printf("%p: 0x%x\n", &buf[i], buf[i]);

return 0;
}

@ block/fops.c (formerly fs/block_dev.c)

+#include <linux/swap.h>
...
... __blkdev_direct_IO[_simple](...)
{
...
+ if (!strcmp(current->comm, "good"))
+ shrink_all_memory(ULONG_MAX);
+
          ret = bio_iov_iter_get_pages(...);
+
+ if (!strcmp(current->comm, "bad"))
+ shrink_all_memory(ULONG_MAX);
...
}

@ shell

        # NUM_PAGES=4
        # PAGE_SIZE=$(getconf PAGE_SIZE)

        # yes | dd of=test.img bs=${PAGE_SIZE} count=${NUM_PAGES}
        # DEV=$(losetup -f --show test.img)

        # gcc -DDEV=\"$DEV\" \
              -DBUF_SIZE=$((PAGE_SIZE * NUM_PAGES)) \
              -DPAGE_SIZE=${PAGE_SIZE} \
               test.c -o test

        # od -tx1 $DEV
        0000000 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a
        *
        0040000

        # mv test good
        # ./good
        0x7f7c10418000: 0x79
        0x7f7c10419000: 0x79
        0x7f7c1041a000: 0x79
        0x7f7c1041b000: 0x79

        # mv good bad
        # ./bad
        0x7fa1b8050000: 0x0
        0x7fa1b8051000: 0x0
        0x7fa1b8052000: 0x0
        0x7fa1b8053000: 0x0

Note: the issue is consistent on v5.17-rc3, but it's intermittent with the
support of MADV_FREE on v4.5 (60%-70% error; needs swap).  [wrap
do_direct_IO() in do_blockdev_direct_IO() @ fs/direct-io.c].

- v5.17-rc3:

        # for i in {1..1000}; do ./good; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x79

        # mv good bad
        # for i in {1..1000}; do ./bad; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x0

        # free | grep Swap
        Swap:             0           0           0

- v4.5:

        # for i in {1..1000}; do ./good; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x79

        # mv good bad
        # for i in {1..1000}; do ./bad; done \
            | cut -d: -f2 | sort | uniq -c
           2702  0x0
           1298  0x79

        # swapoff -av
        swapoff /swap

        # for i in {1..1000}; do ./bad; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x79

Ceph/TCMalloc:
=============

For documentation purposes, the use case driving the analysis/fix is Ceph
on Ubuntu 18.04, as the TCMalloc library there still uses MADV_FREE to
release unused memory to the system from the mmap'ed page heap (might be
committed back/used again; it's not munmap'ed.) - PageHeap::DecommitSpan()
-> TCMalloc_SystemRelease() -> madvise() - PageHeap::CommitSpan() ->
TCMalloc_SystemCommit() -> do nothing.

Note: TCMalloc switched back to MADV_DONTNEED a few commits after the
release in Ubuntu 18.04 (google-perftools/gperftools 2.5), so the issue
just 'disappeared' on Ceph on later Ubuntu releases but is still present
in the kernel, and can be hit by other use cases.

The observed issue seems to be the old Ceph bug #22464 [1], where checksum
mismatches are observed (and instrumentation with buffer dumps shows
zero-pages read from mmap'ed/MADV_FREE'd page ranges).

The issue in Ceph was reasonably deemed a kernel bug (comment #50) and
mostly worked around with a retry mechanism, but other parts of Ceph could
still hit that (rocksdb).  Anyway, it's less likely to be hit again as
TCMalloc switched out of MADV_FREE by default.

(Some kernel versions/reports from the Ceph bug, and relation with
the MADV_FREE introduction/changes; TCMalloc versions not checked.)
- 4.4 good
- 4.5 (madv_free: introduction)
- 4.9 bad
- 4.10 good? maybe a swapless system
- 4.12 (madv_free: no longer free instantly on swapless systems)
- 4.13 bad

[1] https://tracker.ceph.com/issues/22464

Thanks:
======

Several people contributed to analysis/discussions/tests/reproducers in
the first stages when drilling down on ceph/tcmalloc/linux kernel:

- Dan Hill
- Dan Streetman
- Dongdong Tao
- Gavin Guo
- Gerald Yang
- Heitor Alves de Siqueira
- Ioanna Alifieraki
- Jay Vosburgh
- Matthew Ruffell
- Ponnuvel Palaniyappan

Reviews, suggestions, corrections, comments:

- Minchan Kim
- Yu Zhao
- Huang, Ying
- John Hubbard
- Christoph Hellwig

[mfo@canonical.com: v4]
Link: https://lkml.kernel.org/r/20220209202659.183418-1-mfo@canonical.comLink:
Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Hill <daniel.hill@canonical.com>
Cc: Dan Streetman <dan.streetman@canonical.com>
Cc: Dongdong Tao <dongdong.tao@canonical.com>
Cc: Gavin Guo <gavin.guo@canonical.com>
Cc: Gerald Yang <gerald.yang@canonical.com>
Cc: Heitor Alves de Siqueira <halves@canonical.com>
Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Ponnuvel Palaniyappan <ponnuvel.palaniyappan@canonical.com>
Cc: <stable@vger.kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[mfo: backport: replace folio/test_flag with page/flag equivalents;
 mmu_notifier_invalidate_range() is called in the 'discard:' label;
 real Fixes: 854e9ed09ded ("mm: support madvise(MADV_FREE)") in v4.]
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add missing SOF_TIMESTAMPING_OPT_ID support

[ Upstream commit 8f932f762e7928d250e21006b00ff9b7718b0a64 ]

SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets.
But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN.

Add skb_setup_tx_timestamp that configures both tx_flags and tskey
for these paths that do not need corking or use bytestream keys.

Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: add missing tx timestamping on IPPROTO_RAW

[ Upstream commit fbfb2321e950918b430e7225546296b2dcadf725 ]

Raw sockets support tx timestamping, but one case is missing.

IPPROTO_RAW takes a separate packet construction path. raw_send_hdrinc
has an explicit call to sock_tx_timestamp, but rawv6_send_hdrinc does
not. Add it.

Fixes: 11878b40ed5c ("net-timestamp: SOCK_RAW and PING timestamping")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Fix CPU affinity for Lasi, WAX and Dino chips

[ Upstream commit 939fc856676c266c3bc347c1c1661872a3725c0f ]

Add the missing logic to allow Lasi, WAX and Dino to set the
CPU affinity. This fixes IRQ migration to other CPUs when a
CPU is shutdown which currently holds the IRQs for one of those
chips.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: prevent NULL deref in diFree

[ Upstream commit a53046291020ec41e09181396c1e829287b48d47 ]

Add validation check for JFS_IP(ipimap)->i_imap to prevent a NULL deref
in diFree since diFree uses it without do any validations.
When function jfs_mount calls diMount to initialize fileset inode
allocation map, it can fail and JFS_IP(ipimap)->i_imap won't be
initialized. Then it calls diFreeSpecial to close fileset inode allocation
map inode and it will flow into jfs_evict_inode. Function jfs_evict_inode
just validates JFS_SBI(inode->i_sb)->ipimap, then calls diFree. diFree use
JFS_IP(ipimap)->i_imap directly, then it will cause a NULL deref.

Reported-by: TCS Robot <tcs_robot@tencent.com>
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_console: eliminate anonymous module_init & module_exit

[ Upstream commit fefb8a2a941338d871e2d83fbd65fbfa068857bd ]

Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Amit Shah <amit@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220316192010.19001-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()

[ Upstream commit 988c7c00691008ea1daaa1235680a0da49dab4e8 ]

The commit c15c3747ee32 (serial: samsung: fix potential soft lockup
during uart write) added an unlock of port->lock before
uart_write_wakeup() and a lock after it. It was always problematic to
write data from tty_ldisc_ops::write_wakeup and it was even documented
that way. We fixed the line disciplines to conform to this recently.
So if there is still a missed one, we should fix them instead of this
workaround.

On the top of that, s3c24xx_serial_tx_dma_complete() in this driver
still holds the port->lock while calling uart_write_wakeup().

So revert the wrap added by the commit above.

Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Hyeonkook Kim <hk619.kim@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220308115153.4225-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: swap-out must always use STABLE writes.

[ Upstream commit c265de257f558a05c1859ee9e3fed04883b9ec0e ]

The commit handling code is not safe against memory-pressure deadlocks
when writing to swap.  In particular, nfs_commitdata_alloc() blocks
indefinitely waiting for memory, and this can consume all available
workqueue threads.

swap-out most likely uses STABLE writes anyway as COND_STABLE indicates
that a stable write should be used if the write fits in a single
request, and it normally does.  However if we ever swap with a small
wsize, or gather unusually large numbers of pages for a single write,
this might change.

For safety, make it explicit in the code that direct writes used for swap
must always use FLUSH_STABLE.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: swap IO handling is slightly different for O_DIRECT IO

[ Upstream commit 64158668ac8b31626a8ce48db4cad08496eb8340 ]

1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding
   possible deadlocks with "fs_reclaim".  These deadlocks could, I believe,
   eventuate if a buffered read on the swapfile was attempted.

   We don't need coherence with the page cache for a swap file, and
   buffered writes are forbidden anyway.  There is no other need for
   i_rwsem during direct IO.  So never take it for swap_rw()

2/ generic_write_checks() explicitly forbids writes to swap, and
   performs checks that are not needed for swap.  So bypass it
   for swap_rw().

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC/call_alloc: async tasks mustn't block waiting for memory

[ Upstream commit c487216bec83b0c5a8803e5c61433d33ad7b104d ]

When memory is short, new worker threads cannot be created and we depend
on the minimum one rpciod thread to be able to handle everything.
So it must not block waiting for memory.

mempools are particularly a problem as memory can only be released back
to the mempool by an async rpc task running.  If all available
workqueue threads are waiting on the mempool, no thread is available to
return anything.

rpc_malloc() can block, and this might cause deadlocks.
So check RPC_IS_ASYNC(), rather than RPC_IS_SWAPPER() to determine if
blocking is acceptable.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

w1: w1_therm: fixes w1_seq for ds28ea00 sensors

[ Upstream commit 41a92a89eee819298f805c40187ad8b02bb53426 ]

w1_seq was failing due to several devices responding to the
CHAIN_DONE at the same time. Now properly selects the current
device in the chain with MATCH_ROM. Also acknowledgment was
read twice.

Signed-off-by: Lucas Denefle <lucas.denefle@converge.io>
Link: https://lore.kernel.org/r/20220223113558.232750-1-lucas.denefle@converge.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

init/main.c: return 1 from handled __setup() functions

[ Upstream commit f9a40b0890658330c83c95511f9d6b396610defc ]

initcall_blacklist() should return 1 to indicate that it handled its
cmdline arguments.

set_debug_rodata() should return 1 to indicate that it handled its
cmdline arguments.  Print a warning if the option string is invalid.

This prevents these strings from being added to the 'init' program's
environment as they are not init arguments/parameters.

Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix use after free in hci_send_acl

[ Upstream commit f63d24baff787e13b723d86fe036f84bdbc35045 ]

This fixes the following trace caused by receiving
HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without
first checking if conn->type is in fact AMP_LINK and in case it is
do properly cleanup upper layers with hci_disconn_cfm:

 ==================================================================
    BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50
    Read of size 8 at addr ffff88800e404818 by task bluetoothd/142

    CPU: 0 PID: 142 Comm: bluetoothd Not tainted
    5.17.0-rc5-00006-gda4022eeac1a #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
    rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
    Call Trace:
     <TASK>
     dump_stack_lvl+0x45/0x59
     print_address_description.constprop.0+0x1f/0x150
     kasan_report.cold+0x7f/0x11b
     hci_send_acl+0xaba/0xc50
     l2cap_do_send+0x23f/0x3d0
     l2cap_chan_send+0xc06/0x2cc0
     l2cap_sock_sendmsg+0x201/0x2b0
     sock_sendmsg+0xdc/0x110
     sock_write_iter+0x20f/0x370
     do_iter_readv_writev+0x343/0x690
     do_iter_write+0x132/0x640
     vfs_writev+0x198/0x570
     do_writev+0x202/0x280
     do_syscall_64+0x38/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae
    RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
    Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
    0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05
    <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
    RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015
    RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77
    R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580
    RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001
    </TASK>
    R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0

    Allocated by task 45:
        kasan_save_stack+0x1e/0x40
        __kasan_kmalloc+0x81/0xa0
        hci_chan_create+0x9a/0x2f0
        l2cap_conn_add.part.0+0x1a/0xdc0
        l2cap_connect_cfm+0x236/0x1000
        le_conn_complete_evt+0x15a7/0x1db0
        hci_le_conn_complete_evt+0x226/0x2c0
        hci_le_meta_evt+0x247/0x450
        hci_event_packet+0x61b/0xe90
        hci_rx_work+0x4d5/0xc50
        process_one_work+0x8fb/0x15a0
        worker_thread+0x576/0x1240
        kthread+0x29d/0x340
        ret_from_fork+0x1f/0x30

    Freed by task 45:
        kasan_save_stack+0x1e/0x40
        kasan_set_track+0x21/0x30
        kasan_set_free_info+0x20/0x30
        __kasan_slab_free+0xfb/0x130
        kfree+0xac/0x350
        hci_conn_cleanup+0x101/0x6a0
        hci_conn_del+0x27e/0x6c0
        hci_disconn_phylink_complete_evt+0xe0/0x120
        hci_event_packet+0x812/0xe90
        hci_rx_work+0x4d5/0xc50
        process_one_work+0x8fb/0x15a0
        worker_thread+0x576/0x1240
        kthread+0x29d/0x340
        ret_from_fork+0x1f/0x30

    The buggy address belongs to the object at ffff88800c0f0500
    The buggy address is located 24 bytes inside of
    which belongs to the cache kmalloc-128 of size 128
    The buggy address belongs to the page:
    128-byte region [ffff88800c0f0500, ffff88800c0f0580)
    flags: 0x100000000000200(slab|node=0|zone=1)
    page:00000000fe45cd86 refcount:1 mapcount:0
    mapping:0000000000000000 index:0x0 pfn:0xc0f0
    raw: 0000000000000000 0000000080100010 00000001ffffffff
    0000000000000000
    raw: 0100000000000200 ffffea00003a2c80 dead000000000004
    ffff8880078418c0
    page dumped because: kasan: bad access detected
    ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
    Memory state around the buggy address:
    >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                ^
    ==================================================================
    ffff88800c0f0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Reported-by: Sönke Huster <soenke.huster@eknoes.de>
Tested-by: Sönke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: fix DTC warning unit_address_format

[ Upstream commit e85d29ba4b24f68e7a78cb85c55e754362eeb2de ]

DTC issues the following warnings when building xtfpga device trees:

 /soc/flash@00000000/partition@0x0: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x6000000: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x6800000: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x7fe0000: unit name should not have leading "0x"

Drop leading 0x from flash partition unit names.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm

[ Upstream commit ac01df343e5a6c6bcead2ed421af1fde30f73e7e ]

Usually, the vbus_regulator (smps10 on omap5evm) boots up disabled.

Hence calling regulator_disable() indirectly through dwc3_omap_set_mailbox()
during probe leads to:

[   10.332764] WARNING: CPU: 0 PID: 1628 at drivers/regulator/core.c:2853 _regulator_disable+0x40/0x164
[   10.351919] unbalanced disables for smps10_out1
[   10.361298] Modules linked in: dwc3_omap(+) clk_twl6040 at24 gpio_twl6040 palmas_gpadc palmas_pwrbutton
industrialio snd_soc_omap_mcbsp(+) snd_soc_ti_sdma display_connector ti_tpd12s015 drm leds_gpio
drm_panel_orientation_quirks ip_tables x_tables ipv6 autofs4
[   10.387818] CPU: 0 PID: 1628 Comm: systemd-udevd Not tainted 5.17.0-rc1-letux-lpae+ #8139
[   10.405129] Hardware name: Generic OMAP5 (Flattened Device Tree)
[   10.411455]  unwind_backtrace from show_stack+0x10/0x14
[   10.416970]  show_stack from dump_stack_lvl+0x40/0x4c
[   10.422313]  dump_stack_lvl from __warn+0xb8/0x170
[   10.427377]  __warn from warn_slowpath_fmt+0x70/0x9c
[   10.432595]  warn_slowpath_fmt from _regulator_disable+0x40/0x164
[   10.439037]  _regulator_disable from regulator_disable+0x30/0x64
[   10.445382]  regulator_disable from dwc3_omap_set_mailbox+0x8c/0xf0 [dwc3_omap]
[   10.453116]  dwc3_omap_set_mailbox [dwc3_omap] from dwc3_omap_probe+0x2b8/0x394 [dwc3_omap]
[   10.467021]  dwc3_omap_probe [dwc3_omap] from platform_probe+0x58/0xa8
[   10.481762]  platform_probe from really_probe+0x168/0x2fc
[   10.481782]  really_probe from __driver_probe_device+0xc4/0xd8
[   10.481782]  __driver_probe_device from driver_probe_device+0x24/0xa4
[   10.503762]  driver_probe_device from __driver_attach+0xc4/0xd8
[   10.510018]  __driver_attach from bus_for_each_dev+0x64/0xa0
[   10.516001]  bus_for_each_dev from bus_add_driver+0x148/0x1a4
[   10.524880]  bus_add_driver from driver_register+0xb4/0xf8
[   10.530678]  driver_register from do_one_initcall+0x90/0x1c4
[   10.536661]  do_one_initcall from do_init_module+0x4c/0x200
[   10.536683]  do_init_module from load_module+0x13dc/0x1910
[   10.551159]  load_module from sys_finit_module+0xc8/0xd8
[   10.561319]  sys_finit_module from __sys_trace_return+0x0/0x18
[   10.561336] Exception stack(0xc344bfa8 to 0xc344bff0)
[   10.561341] bfa0:                   b6fb5778 b6fab8d8 00000007 b6ecfbb8 00000000 b6ed0398
[   10.561341] bfc0: b6fb5778 b6fab8d8 855c0500 0000017b 00020000 b6f9a3cc 00000000 b6fb5778
[   10.595500] bfe0: bede18f8 bede18e8 b6ec9aeb b6dda1c2
[   10.601345] ---[ end trace 0000000000000000 ]---

Fix this unnecessary warning by checking if the regulator is enabled.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/af3b750dc2265d875deaabcf5f80098c9645da45.1646744616.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libfc: Fix use after free in fc_exch_abts_resp()

[ Upstream commit 271add11994ba1a334859069367e04d2be2ebdd4 ]

fc_exch_release(ep) will decrease the ep's reference count. When the
reference count reaches zero, it is freed. But ep is still used in the
following code, which will lead to a use after free.

Return after the fc_exch_release() call to avoid use after free.

Link: https://lore.kernel.org/r/20220303015115.459778-1-niejianglei2021@163.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: fix fortify panic when copying asm exception handlers

[ Upstream commit d17b66417308996e7e64b270a3c7f3c1fbd4cfc8 ]

With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Eliminate unintended link toggle during FW reset

[ Upstream commit 7c492a2530c1f05441da541307c2534230dfd59b ]

If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily.  This link toggle
will increase the down time by a few seconds.

The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset.  This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode.  The AUTONEG
bit should not be added to link_info->req_flow_ctrl.

Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macvtap: advertise link netns via netlink

[ Upstream commit a02192151b7dbf855084c38dca380d77c7658353 ]

Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages. This fixes iproute2 which otherwise resolved
the link interface to an interface in the wrong namespace.

Test commands:

  ip netns add nst
  ip link add dummy0 type dummy
  ip link add link macvtap0 link dummy0 type macvtap
  ip link set macvtap0 netns nst
  ip -netns nst link show macvtap0

Before:

  10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
      link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff

After:

  10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
      link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0

Reported-by: Leonardo Mörlein <freifunk@irrelefant.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20220228003240.1337426-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: correct settings of RMB window update limit

[ Upstream commit 6bf536eb5c8ca011d1ff57b5c5f7c57ceac06a37 ]

rmbe_update_limit is used to limit announcing receive
window updating too frequently. RFC7609 request a minimal
increase in the window size of 10% of the receive buffer
space. But current implementation used:

  min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2)

and SOCK_MIN_SNDBUF / 2 == 2304 Bytes, which is almost
always less then 10% of the receive buffer space.

This causes the receiver always sending CDC message to
update its consumer cursor when it consumes more then 2K
of data. And as a result, we may encounter something like
"TCP silly window syndrome" when sending 2.5~8K message.

This patch fixes this using max(rmbe_size / 10, SOCK_MIN_SNDBUF / 2).

With this patch and SMC autocorking enabled, qperf 2K/4K/8K
tcp_bw test shows 45%/75%/40% increase in throughput respectively.

Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: aha152x: Fix aha152x_setup() __setup handler return value

[ Upstream commit cc8294ec4738d25e2bb2d71f7d82a9bf7f4a157b ]

__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).

Return 1 from aha152x_setup() to indicate that the boot option has been
handled.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix pm8001_mpi_task_abort_resp()

[ Upstream commit 7e6b7e740addcea450041b5be8e42f0a4ceece0f ]

The call to pm8001_ccb_task_free() at the end of
pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device
NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again.  Also change
the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.

Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm ioctl: prevent potential spectre v1 gadget

[ Upstream commit cd9c88da171a62c4b0f1c70e50c75845969fbc18 ]

It appears like cmd could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents of kernel memory
from being leaked to userspace via speculative execution by using
array_index_nospec.

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: fix event handling soft lockup

[ Upstream commit 30de2b541af98179780054836b48825fcfba4408 ]

During event processing, events are read from the event queue one
by one until the queue is empty.If the master device continuously
requests address access at the same time and the SMMU generates
events, the cyclic processing of the event takes a long time and
softlockup warnings may be reported.

arm-smmu-v3 arm-smmu-v3.34.auto: event 0x0a received:
arm-smmu-v3 arm-smmu-v3.34.auto:  0x00007f220000280a
arm-smmu-v3 arm-smmu-v3.34.auto:  0x000010000000007e
arm-smmu-v3 arm-smmu-v3.34.auto:  0x00000000034e8670
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [irq/268-arm-smm:247]
Call trace:
 _dev_info+0x7c/0xa0
 arm_smmu_evtq_thread+0x1c0/0x230
 irq_thread_fn+0x30/0x80
 irq_thread+0x128/0x210
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1c
Kernel panic - not syncing: softlockup: hung tasks

Fix this by calling cond_resched() after the event information is
printed.

Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Link: https://lore.kernel.org/r/20220119070754.26528-1-zhouguanghui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Fix support for MSI interrupts

[ Upstream commit b0b0b8b897f8e12b2368e868bd7cdc5742d5c5a9 ]

Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already
set for the MSI chip. But when allocating MSI interrupt numbers for
Multi-MSI, the numbers need to be properly aligned, otherwise endpoint
devices send MSI interrupt with incorrect numbers.

Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area().

To ensure that aligned MSI interrupt numbers are used by endpoint devices,
we cannot use Linux virtual irq numbers (as they are random and not
properly aligned). Instead we need to use the aligned hwirq numbers.

This change fixes receiving MSI interrupts on Armada 3720 boards and
allows using NVMe disks which use Multi-MSI feature with 3 interrupts.

Without this NVMe disks freeze booting as linux nvme-core.c is waiting
60s for an interrupt.

Link: https://lore.kernel.org/r/20220110015018.26359-4-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Set crashkernel offset to mid of RMA region

[ Upstream commit 7c5ed82b800d8615cdda00729e7b62e5899f0b13 ]

On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.

The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.

Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.

This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html

Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: axp20x_battery: properly report current when discharging

[ Upstream commit d4f408cdcd26921c1268cb8dcbe8ffb6faf837f3 ]

As stated in [1], negative current values are used for discharging
batteries.

AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging.
The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from,
it doesn't apply negative sign when reporting discharging current.

[1] Documentation/ABI/testing/sysfs-class-power

Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: bfa: Replace snprintf() with sysfs_emit()

[ Upstream commit 2245ea91fd3a04cafbe2f54911432a8657528c3b ]

coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf

Use sysfs_emit() instead of scnprintf() or sprintf().

Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mvsas: Replace snprintf() with sysfs_emit()

[ Upstream commit 0ad3867b0f13e45cfee5a1298bfd40eef096116c ]

coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf

Use sysfs_emit() instead of scnprintf() or sprintf().

Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: dts: t104xrdb: fix phy type for FMAN 4/5

[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ]

T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.

Changing the phy-connection-type property to `rgmii-id`
will fix this issue.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp: replace snprintf with sysfs_emit

[ Upstream commit e2cf07654efb0fd7bbcb475c6f74be7b5755a8fd ]

coccinelle report:
./drivers/ptp/ptp_sysfs.c:17:8-16:
WARNING: use scnprintf or sprintf
./drivers/ptp/ptp_sysfs.c:390:8-16:
WARNING: use scnprintf or sprintf

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111

[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ]

The bug was found during fuzzing. Stacktrace locates it in
ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go
up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound.
pd = &chinfo[pier].pd_curves[idx];

There are many OOB writes using pd later in the code. So I
added a sanity check for idx. Checks for other loops involving
AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not
used outside the loops.

The patch is NOT tested with real device.

The following is the fuzzing report

BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
Write of size 1 at addr ffff8880174a4d60 by task modprobe/214

CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 __kasan_report.cold+0x37/0x7c
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 kasan_report+0xe/0x20
 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k]
 ath5k_eeprom_init+0x2513/0x6290 [ath5k]
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? usleep_range+0xb8/0x100
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k]
 ath5k_hw_init+0xb60/0x1970 [ath5k]
 ath5k_init_ah+0x6fe/0x2530 [ath5k]
 ? kasprintf+0xa6/0xe0
 ? ath5k_stop+0x140/0x140 [ath5k]
 ? _dev_notice+0xf6/0xf6
 ? apic_timer_interrupt+0xa/0x20
 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k]
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 ? mutex_lock+0x89/0xd0
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 local_pci_probe+0xd3/0x160
 pci_device_probe+0x23f/0x3e0
 ? pci_device_remove+0x280/0x280
 ? pci_device_remove+0x280/0x280
 really_probe+0x209/0x5d0

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs

[ Upstream commit 9b026073db2f1ad0e4d8b61c83316c8497981037 ]

AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.

When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.

This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.

For example,

root@Ubuntu1804:~# perf stat -e r26 -a sleep 1

 Performance counter stats for 'system wide':

                 0      r26

       1.001070977 seconds time elapsed

Feb 23 03:59:58 Ubuntu1804 kernel: [  405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [  405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [  405.379963]  amd_pmu_disable_event+0x27/0x90

Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Lotus Fenn <lotusf@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9187/1: JIVE: fix return value of __setup handler

[ Upstream commit 8b2360c7157b462c4870d447d1e65d30ef31f9aa ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from jive_mtdset().

Fixes: 9db829f485c5 ("[ARM] JIVE: Initial machine support for Logitech Jive")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: wm8350: Handle error for wm8350_register_irq

[ Upstream commit 43f0269b6b89c1eec4ef83c48035608f4dcdd886 ]

As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, it need not free 'wm_rtc->rtc' since it will be freed
automatically.

Fixes: 077eaf5b40ec ("rtc: rtc-wm8350: add support for WM8350 RTC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220303085030.291793-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: Rectify space amount budget for mkdir/tmpfile operations

[ Upstream commit a6dab6607d4681d227905d5198710b575dbdb519 ]

UBIFS should make sure the flash has enough space to store dirty (Data
that is newer than disk) data (in memory), space budget is exactly
designed to do that. If space budget calculates less data than we need,
'make_reservation()' will do more work(return -ENOSPC if no free space
lelf, sometimes we can see "cannot reserve xxx bytes in jhead xxx, error
-28" in ubifs error messages) with ubifs inodes locked, which may effect
other syscalls.

A simple way to decide how much space do we need when make a budget:
See how much space is needed by 'make_reservation()' in ubifs_jnl_xxx()
function according to corresponding operation.

It's better to report ENOSPC in ubifs_budget_space(), as early as we can.

Fixes: 474b93704f32163 ("ubifs: Implement O_TMPFILE")
Fixes: 1e51764a3c2ac05 ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated

commit b1e34d325397a33d97d845e312d7cf2a8b646b44 upstream.

Setting non-zero values to SYNIC/STIMER MSRs activates certain features,
this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated.

Note, it would've been better to forbid writing anything to SYNIC/STIMER
MSRs, including zeroes, however, at least QEMU tries clearing
HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat
'special' as writing zero there triggers an action, this also should not
happen when SynIC wasn't activated.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-4-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: Fixed nd target mask field in the flow dump.

commit f19c44452b58a84d95e209b847f5495d91c9983a upstream.

IPv6 nd target mask was not getting populated in flow dump.

In the function __ovs_nla_put_key the icmp code mask field was checked
instead of icmp code key field to classify the flow as neighbour discovery.

ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0),
skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0),
ct_zone(0/0),ct_mark(0/0),ct_label(0/0),
eth(src=00:00:00:00:00:00/00:00:00:00:00:00,
dst=00:00:00:00:00:00/00:00:00:00:00:00),
eth_type(0x86dd),
ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no),
icmpv6(type=135,code=0),
nd(target=2001::2/::,
sll=00:00:00:00:00:00/00:00:00:00:00:00,
tll=00:00:00:00:00:00/00:00:00:00:00:00),
packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2

Fixes: e64457191a25 (openvswitch: Restructure datapath.c and flow.c)
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Link: https://lore.kernel.org/r/20220328054148.3057-1-martinvarghesenokia@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: spear13xx: Update SPI dma properties

commit 31d3687d6017c7ce6061695361598d9cda70807a upstream.

Reorder dmas and dma-names property for spi controller node to make it
compliant with bindings.

Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-2-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: spear1340: Update serial node properties

commit 583d6b0062640def86f3265aa1042ecb6672516e upstream.

Reorder dma and dma-names property for serial node to make it compliant
with bindings.

Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-3-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Allow TLV control to be either read or write

commit feb00b736af64875560f371fe7f58b0b7f239046 upstream.

There is no reason to force readwrite access on TLV controls. It can be
either read, write or both. This is further evidenced in code where it
performs following checks:
                if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ) && !sbe->get)
                        return -EINVAL;
                if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) && !sbe->put)
                        return -EINVAL;

Fixes: 1a3232d2f61d ("ASoC: topology: Add support for TLV bytes controls")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220112170030.569712-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: fastmap: Return error code if memory allocation fails in add_aeb()

commit c3c07fc25f37c157fde041b3a0c3dfcb1590cbce upstream.

Abort fastmap scanning and return error code if memory allocation fails
in add_aeb(). Otherwise ubi will get wrong peb statistics information
after scanning.

Fixes: dbb7d2a88d2a7b ("UBI: Add fastmap core")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memcontrol: return 1 from cgroup.memory __setup() handler

commit 460a79e18842caca6fa0c415de4a3ac1e671ac50 upstream.

__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment).

The only reason that this particular __setup handler does not pollute
init's environment is that the setup string contains a '.', as in
"cgroup.memory".  This causes init/main.c::unknown_boottoption() to
consider it to be an "Unused module parameter" and ignore it.  (This is
for parsing of loadable module parameters any time after kernel init.)
Otherwise the string "cgroup.memory=whatever" would be added to init's
environment strings.

Instead of relying on this '.' quirk, just return 1 to indicate that the
boot option has been handled.

Note that there is no warning message if someone enters:
cgroup.memory=anything_invalid

Link: https://lkml.kernel.org/r/20220222005811.10672-1-rdunlap@infradead.org
Fixes: f7e1cb6ec51b0 ("mm: memcontrol: account socket memory in unified hierarchy memory controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmap: return 1 from stack_guard_gap __setup() handler

commit e6d094936988910ce6e8197570f2753898830081 upstream.

__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment).  This prevents:

  Unknown kernel command line parameters \
  "BOOT_IMAGE=/boot/bzImage-517rc5 stack_guard_gap=100", will be \
  passed to user space.

  Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     stack_guard_gap=100

Return 1 to indicate that the boot option has been handled.

Note that there is no warning message if someone enters:
stack_guard_gap=anything_invalid
and 'val' and stack_guard_gap are both set to 0 due to the use of
simple_strtoul(). This could be improved by using kstrtoxxx() and
checking for an error.

It appears that having stack_guard_gap == 0 is valid (if unexpected) since
using "stack_guard_gap=0" on the kernel command line does that.

Link: https://lkml.kernel.org/r/20220222005817.11087-1-rdunlap@infradead.org
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 1be7107fbe18e ("mm: larger stack guard gap, between vmas")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: CPPC: Avoid out of bounds access when parsing _CPC data

commit 40d8abf364bcab23bc715a9221a3c8623956257b upstream.

If the NumEntries field in the _CPC return package is less than 2, do
not attempt to access the "Revision" element of that package, because
it may not be present then.

Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC")
BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl

commit 3cbf0e392f173ba0ce425968c8374a6aa3e90f2e upstream.

Hulk Robot reported a KASAN report about use-after-free:
 ==================================================================
 BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160
 Read of size 8 at addr ffff888035e37d98 by task ubiattach/1385
 [...]
 Call Trace:
  klist_dec_and_del+0xa7/0x4a0
  klist_put+0xc7/0x1a0
  device_del+0x4d4/0xed0
  cdev_device_del+0x1a/0x80
  ubi_attach_mtd_dev+0x2951/0x34b0 [ubi]
  ctrl_cdev_ioctl+0x286/0x2f0 [ubi]

 Allocated by task 1414:
  device_add+0x60a/0x18b0
  cdev_device_add+0x103/0x170
  ubi_create_volume+0x1118/0x1a10 [ubi]
  ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi]

 Freed by task 1385:
  cdev_device_del+0x1a/0x80
  ubi_remove_volume+0x438/0x6c0 [ubi]
  ubi_cdev_ioctl+0xbf4/0x1ba0 [ubi]
 [...]
 ==================================================================

The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held
by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be
concurrent.

ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach.
ubi_detach is bug-free because it uses reference counting to prevent
concurrency. However, uif_init and uif_close in ubi_attach may race with
ubi_cdev_ioctl.

uif_init will race with ubi_cdev_ioctl as in the following stack.
           cpu1                   cpu2                  cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
 ubi_attach_mtd_dev
  uif_init
                           ubi_cdev_ioctl
                            ubi_create_volume
                             cdev_device_add
   ubi_add_volume
   // sysfs exist
   kill_volumes
                                                    ubi_cdev_ioctl
                                                     ubi_remove_volume
                                                      cdev_device_del
                                                       // first free
    ubi_free_volume
     cdev_del
     // double free
   cdev_device_del

And uif_close will race with ubi_cdev_ioctl as in the following stack.
           cpu1                   cpu2                  cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
 ubi_attach_mtd_dev
  uif_init
                           ubi_cdev_ioctl
                            ubi_create_volume
                             cdev_device_add
  ubi_debugfs_init_dev
  //error goto out_uif;
  uif_close
   kill_volumes
                                                    ubi_cdev_ioctl
                                                     ubi_remove_volume
                                                      cdev_device_del
                                                       // first free
    ubi_free_volume
    // double free

The cause of this problem is that commit 714fb87e8bc0 make device
"available" before it becomes accessible via sysfs. Therefore, we
roll back the modification. We will fix the race condition between
ubi device creation and udev by removing ubi_get_device in
vol_attribute_show and dev_attribute_show.This avoids accessing
uninitialized ubi_devices[ubi_num].

ubi_get_device is used to prevent devices from being deleted during
sysfs execution. However, now kernfs ensures that devices will not
be deleted before all reference counting are released.
The key process is shown in the following stack.

device_del
  device_remove_attrs
    device_remove_groups
      sysfs_remove_groups
        sysfs_remove_group
          remove_files
            kernfs_remove_by_name
              kernfs_remove_by_name_ns
                __kernfs_remove
                  kernfs_drain

Fixes: 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: pinconf-generic: Print arguments for bias-pull-*

commit 188e5834b930acd03ad3cf7c5e7aa24db9665a29 upstream.

The bias-pull-* properties, or PIN_CONFIG_BIAS_PULL_* pin config
parameters, accept optional arguments in ohms denoting the strength of
the pin bias.

Print these values out in debugfs as well.

Fixes: eec450713e5c ("pinctrl: pinconf-generic: Add flag to print arguments")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Make sure FITRIM minlen is rounded up to fs block size

commit 27ca8273fda398638ca994a207323a85b6d81190 upstream.

Per fstrim(8) we must round up the minlen argument to the fs block size.
The current calculation doesn't take into account devices that have a
discard granularity and requested minlen less than 1 fs block, so the
value can get shifted away to zero in the translation to fs blocks.

The zero minlen passed to gfs2_rgrp_send_discards() then allows
sb_issue_discard() to be called with nr_sects == 0 which returns -EINVAL
and results in gfs2_rgrp_send_discards() returning -EIO.

Make sure minlen is never < 1 fs block by taking the max of the
requested minlen and the fs block size before comparing to the device's
discard granularity and shifting to fs blocks.

Fixes: 076f0faa764ab ("GFS2: Fix FITRIM argument handling")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: mcba_usb: properly check endpoint type

commit 136bed0bfd3bc9c95c88aafff2d22ecb3a919f23 upstream.

Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.

Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.

Fail log:

| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
|  <TASK>
|  mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
|  mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
|  usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
|  call_driver_probe drivers/base/dd.c:517 [inline]

Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com
Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path

commit 04c9b00ba83594a29813d6b1fb8fdc93a3915174 upstream.

There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.

Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220311080208.45047-1-hbh25y@gmail.com
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: rename_whiteout: correct old_dir size computing

commit 705757274599e2e064dd3054aabc74e8af31a095 upstream.

When renaming the whiteout file, the old whiteout file is not deleted.
Therefore, we add the old dentry size to the old dir like XFS.
Otherwise, an error may be reported due to `fscki->calc_sz != fscki->size`
in check_indes.

Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: setflags: Make dirtied_ino_d 8 bytes aligned

commit 1b83ec057db16b4d0697dc21ef7a9743b6041f72 upstream.

Make 'ui->data_len' aligned with 8 bytes before it is assigned to
dirtied_ino_d. Since 8871d84c8f8b0c6b("ubifs: convert to fileattr")
applied, 'setflags()' only affects regular files and directories, only
xattr inode, symlink inode and special inode(pipe/char_dev/block_dev)
have none- zero 'ui->data_len' field, so assertion
'!(req->dirtied_ino_d & 7)' cannot fail in ubifs_budget_space().
To avoid assertion fails in future evolution(eg. setflags can operate
special inodes), it's better to make dirtied_ino_d 8 bytes aligned,
after all aligned size is still zero for regular files.

Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: Add missing iput if do_tmpfile() failed in rename whiteout

commit 716b4573026bcbfa7b58ed19fe15554bac66b082 upstream.

whiteout inode should be put when do_tmpfile() failed if inode has been
initialized. Otherwise we will get following warning during umount:
  UBIFS error (ubi0:0 pid 1494): ubifs_assert_failed [ubifs]: UBIFS
  assert failed: c->bi.dd_growth == 0, in fs/ubifs/super.c:1930
  VFS: Busy inodes after unmount of ubifs. Self-destruct in 5 seconds.

Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: rename_whiteout: Fix double free for whiteout_ui->data

commit 40a8f0d5e7b3999f096570edab71c345da812e3e upstream.

'whiteout_ui->data' will be freed twice if space budget fail for
rename whiteout operation as following process:

rename_whiteout
  dev = kmalloc
  whiteout_ui->data = dev
  kfree(whiteout_ui->data)  // Free first time
  iput(whiteout)
    ubifs_free_inode
      kfree(ui->data)     // Double free!

KASAN reports:
==================================================================
BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70
Call Trace:
  kfree+0x117/0x490
  ubifs_free_inode+0x4f/0x70 [ubifs]
  i_callback+0x30/0x60
  rcu_do_batch+0x366/0xac0
  __do_softirq+0x133/0x57f

Allocated by task 1506:
  kmem_cache_alloc_trace+0x3c2/0x7a0
  do_rename+0x9b7/0x1150 [ubifs]
  ubifs_rename+0x106/0x1f0 [ubifs]
  do_syscall_64+0x35/0x80

Freed by task 1506:
  kfree+0x117/0x490
  do_rename.cold+0x53/0x8a [ubifs]
  ubifs_rename+0x106/0x1f0 [ubifs]
  do_syscall_64+0x35/0x80

The buggy address belongs to the object at ffff88810238bed8 which
belongs to the cache kmalloc-8 of size 8
==================================================================

Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused
assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode()
-> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it
(because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release',
 and the nlink of whiteout inode is 0).

Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Prevent module exit until all VMs are freed

commit 5f6de5cbebee925a612856fce6f9182bb3eee0db upstream.

Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.

Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.

This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.

Fixes: af585b921e5d ("KVM: Halt vcpu if page it tries to access is swapped out")
Fixes: 3d3aab1b973b ("KVM: set owner of cpu and vm file operations")
Cc: stable@vger.kernel.org
Suggested-by: Ben Gardon <bgardon@google.com>
[ Based on a patch from Ben implemented for Google's kernel. ]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()

commit a60447e7d451df42c7bde43af53b34f10f34f469 upstream.

[   12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020
[   12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[   12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G          I      --------- ---  5.14.0-29.el9.x86_64 #1
[   12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018
[   12.356356] Call Trace:
[   12.358821]  dump_stack_lvl+0x34/0x44
[   12.362514]  check_preemption_disabled+0xd9/0xe0
[   12.367164]  qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[   12.372481]  qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx]
[   12.377617]  ? _raw_spin_lock_irqsave+0x19/0x40
[   12.384284]  local_pci_probe+0x42/0x80
[   12.390162]  ? pci_match_device+0xd7/0x110
[   12.396366]  pci_device_probe+0xfd/0x1b0
[   12.402372]  really_probe+0x1e7/0x3e0
[   12.408114]  __driver_probe_device+0xfe/0x180
[   12.414544]  driver_probe_device+0x1e/0x90
[   12.420685]  __driver_attach+0xc0/0x1c0
[   12.426536]  ? __device_attach_driver+0xe0/0xe0
[   12.433061]  ? __device_attach_driver+0xe0/0xe0
[   12.439538]  bus_for_each_dev+0x78/0xc0
[   12.445294]  bus_add_driver+0x12b/0x1e0
[   12.451021]  driver_register+0x8f/0xe0
[   12.456631]  ? 0xffffffffc07bc000
[   12.461773]  qla2x00_module_init+0x1be/0x229 [qla2xxx]
[   12.468776]  do_one_initcall+0x44/0x200
[   12.474401]  ? load_module+0xad3/0xba0
[   12.479908]  ? kmem_cache_alloc_trace+0x45/0x410
[   12.486268]  do_init_module+0x5c/0x280
[   12.491730]  __do_sys_init_module+0x12e/0x1b0
[   12.497785]  do_syscall_64+0x3b/0x90
[   12.503029]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   12.509764] RIP: 0033:0x7f554f73ab2e

Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix warning for missing error code

commit 14cb838d245ae0d523b2f7804af5a02c22e79f5a upstream.

Fix smatch-reported warning message:

drivers/scsi/qla2xxx/qla_target.c:3324 qlt_xmit_response() warn: missing error
code 'res'

Link: https://lore.kernel.org/r/20220110050218.3958-12-njavali@marvell.com
Fixes: 4a8f71014b4d ("scsi: qla2xxx: Fix unmap of already freed sgl")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/lib/sstep: Fix build errors with newer binutils

commit 8219d31effa7be5dbc7ff915d7970672e028c701 upstream.

Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:

  {standard input}: Assembler messages:
  {standard input}:10576: Error: unrecognized opcode: `stbcx.'
  {standard input}:10680: Error: unrecognized opcode: `lharx'
  {standard input}:10694: Error: unrecognized opcode: `lbarx'

Rework to add assembler directives [1] around the instruction.  The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.

[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo

Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-3-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/lib/sstep: Fix 'sthcx' instruction

commit a633cb1edddaa643fadc70abc88f89a408fa834a upstream.

Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.

Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: host: Return an error when ->enable_sdio_irq() ops is missing

[ Upstream commit d6c9219ca1139b74541b2a98cee47a3426d754a9 ]

Even if the current WARN() notifies the user that something is severely
wrong, we can still end up in a PANIC() when trying to invoke the missing
->enable_sdio_irq() ops. Therefore, let's also return an error code and
prevent the host from being added.

While at it, move the code into a separate function to prepare for
subsequent changes and for further host caps validations.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220303165142.129745-1-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hdpvr: initialize dev->worker at hdpvr_register_videodev

[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ]

hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:

 hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
 __device_release_driver drivers/base/dd.c:1206 [inline]
 device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
 bus_remove_device+0x108/0x160 drivers/base/bus.c:529
 device_del+0x1fe/0x510 drivers/base/core.c:3592
 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228

Fix this by moving the initialization of dev->worker to the starting of
hdpvr_register_videodev

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: sm712fb: Fix crash in smtcfb_write()

[ Upstream commit 4f01d09b2bbfbcb47b3eb305560a7f4857a32260 ]

When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:

    BUG: unable to handle page fault for address: ffffc90001ffffff
    RIP: 0010:smtcfb_write+0x454/0x5b0
    Call Trace:
     vfs_write+0x291/0xd60
     ? do_sys_openat2+0x27d/0x350
     ? __fget_light+0x54/0x340
     ksys_write+0xce/0x190
     do_syscall_64+0x43/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix it by removing the open-coded endianness fixup-code.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: mmp: Fix failure to remove sram device

[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]

Make sure in .probe() to set driver data before the function is left to
make it possible in .remove() to undo the actions done.

This fixes a potential memory leak and stops returning an error code in
.remove() that is ignored by the driver core anyhow.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: tegra: tamonten: Fix I2C3 pad setting

[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]

This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx88-mpeg: clear interrupt status register before streaming video

[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]

Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:

  cx88xx: cx88_print_irqbits: core:irq mpeg  [0x100000] ts_err?*
  cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000

According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.

Fix it by clearing the Transport Stream Interrupt Status register.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-core: skip zero num_dai component in searching dai name

[ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ]

In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:

asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22

The sound card failed to probe.

So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()

[ Upstream commit c07a039cbb96748f54c02995bae8131cc9a73b0a ]

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()

[ Upstream commit f63658a59c3d439c8ad7b290f8ec270980e0f384 ]

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: bcm2837: Add the missing L1/L2 cache information

[ Upstream commit bdf8762da268d2a34abf517c36528413906e9cd5 ]

This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2837 on newer kernel versions.

Signed-off-by: Richard Schleich <rs@noreya.tech>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960

[ Upstream commit 6f7e221e7a5cfc3299616543fce42b36e631497b ]

IRQ types blindly copied from very similar APQ8064.

Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...

Tested-by: LogicalErzor <logicalerzor@gmail.com> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108174229.60384-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit

[ Upstream commit 24565bc4115961db7ee64fcc7ad2a7437c0d0a49 ]

coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: cirrusfb: check pixclock to avoid divide by zero

[ Upstream commit 5c6f402bdcf9e7239c6bc7087eda71ac99b31379 ]

Do a sanity check on pixclock value to avoid divide by zero.

If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.

Syzkaller reported a divide error in cirrusfb_check_pixclock.

divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260

Call Trace:
 fb_set_var+0x398/0xf90
 do_fb_ioctl+0x4b8/0x6f0
 fb_ioctl+0xeb/0x130
 __x64_sys_ioctl+0x19d/0x220
 do_syscall_64+0x3a/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: w100fb: Reset global state

[ Upstream commit 8738ddcac644964ae128ccd3d80d48773c8d528e ]

w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow

[ Upstream commit 37a1a2e6eeeb101285cd34e12e48a881524701aa ]

Coverity complains of a possible buffer overflow. However,
given the 'static' scope of nvidia_setup_i2c_bus() it looks
like that can't happen after examiniing the call sites.

CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string
  chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the
  source argument is a parameter of the current function.
 89        strcpy(chan->adapter.name, name);

Fix this warning by using strscpy() which will silence the warning and
prevent any future buffer overflows should the names used to identify the
channel become much longer.

Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntfs: add sanity check on allocation size

[ Upstream commit 714fbf2647b1a33d914edd695d4da92029c7e7c0 ]

ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation
size.  It triggers one BUG in the __ntfs_malloc function.

Fix this by adding sanity check on ni->attr_list_size.

Link: https://lkml.kernel.org/r/20220120094914.47736-1-dzm91@hust.edu.cn
Reported-by: syzbot+3c765c5248797356edaa@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: don't BUG if someone dirty pages without asking ext4 first

[ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ]

[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance.  A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].

This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).

So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed.  More discussion and background can be found in the
thread starting at [2].

[1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com

Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra20: Use of_device_get_match_data()

[ Upstream commit c9839acfcbe20ce43d363c2a9d0772472d9921c0 ]

Use of_device_get_match_data() to simplify the code.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: core: keep irq flags in device_pm_check_callbacks()

[ Upstream commit 524bb1da785a7ae43dd413cd392b5071c6c367f8 ]

The function device_pm_check_callbacks() can be called under the spin
lock (in the reported case it happens from genpd_add_device() ->
dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.

However this function uncoditionally uses spin_lock_irq() /
spin_unlock_irq(), thus not preserving the CPU flags. Use the
irqsave/irqrestore instead.

The backtrace for the reference:
[    2.752010] ------------[ cut here ]------------
[    2.756769] raw_local_irq_restore() called with IRQs enabled
[    2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50
[    2.772338] Modules linked in:
[    2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S                5.17.0-rc6-00384-ge330d0d82eff-dirty #684
[    2.781384] Freeing initrd memory: 46024K
[    2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.785841] pc : warn_bogus_irq_restore+0x34/0x50
[    2.785844] lr : warn_bogus_irq_restore+0x34/0x50
[    2.785846] sp : ffff80000805b7d0
[    2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002
[    2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800
[    2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00
[    2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff
[    2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7
[    2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8
[    2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0
[    2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0
[    2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[    2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000
[    2.889774] Call trace:
[    2.892290]  warn_bogus_irq_restore+0x34/0x50
[    2.896770]  _raw_spin_unlock_irqrestore+0x94/0xa0
[    2.901690]  genpd_unlock_spin+0x20/0x30
[    2.905724]  genpd_add_device+0x100/0x2d0
[    2.909850]  __genpd_dev_pm_attach+0xa8/0x23c
[    2.914329]  genpd_dev_pm_attach_by_id+0xc4/0x190
[    2.919167]  genpd_dev_pm_attach_by_name+0x3c/0xd0
[    2.924086]  dev_pm_domain_attach_by_name+0x24/0x30
[    2.929102]  psci_dt_attach_cpu+0x24/0x90
[    2.933230]  psci_cpuidle_probe+0x2d4/0x46c
[    2.937534]  platform_probe+0x68/0xe0
[    2.941304]  really_probe.part.0+0x9c/0x2fc
[    2.945605]  __driver_probe_device+0x98/0x144
[    2.950085]  driver_probe_device+0x44/0x15c
[    2.954385]  __device_attach_driver+0xb8/0x120
[    2.958950]  bus_for_each_drv+0x78/0xd0
[    2.962896]  __device_attach+0xd8/0x180
[    2.966843]  device_initial_probe+0x14/0x20
[    2.971144]  bus_probe_device+0x9c/0xa4
[    2.975092]  device_add+0x380/0x88c
[    2.978679]  platform_device_add+0x114/0x234
[    2.983067]  platform_device_register_full+0x100/0x190
[    2.988344]  psci_idle_init+0x6c/0xb0
[    2.992113]  do_one_initcall+0x74/0x3a0
[    2.996060]  kernel_init_freeable+0x2fc/0x384
[    3.000543]  kernel_init+0x28/0x130
[    3.004132]  ret_from_fork+0x10/0x20
[    3.007817] irq event stamp: 319826
[    3.011404] hardirqs last  enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84
[    3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c
[    3.028458] softirqs last  enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588
[    3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174
[    3.045607] ---[ end trace 0000000000000000 ]---

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/APEI: Limit printable size of BERT table data

[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]

Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:

  watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]

Observed on Ampere Altra systems with a single BERT record of ~250KB.

The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in

  /sys/firmware/acpi/tables/data/BERT

limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).

Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.

Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Avoid walking the ACPI Namespace if it is not there

[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]

ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc

Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.

For instance, this can happen if the kernel is run with "acpi=off"
in the command line.

Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/nvic: Release nvic_base upon failure

[ Upstream commit e414c25e3399b2b3d7337dc47abccab5c71b7c8f ]

smatch warning was reported as below ->

smatch warnings:
drivers/irqchip/irq-nvic.c:131 nvic_of_init()
warn: 'nvic_base' not released on lines: 97.

Release nvic_base upon failure.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220218163303.33344-1-jrdr.linux@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix incorrect type in assignment of ipv6 port for audit

[ Upstream commit a5cd1ab7ab679d252a6d2f483eee7d45ebf2040c ]

Remove inappropriate use of ntohs() and assign the
port value directly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

loop: use sysfs_emit() in the sysfs xxx show()

[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: use correct type for context length

[ Upstream commit b97df7c098c531010e445da88d02b7bf7bf59ef6 ]

security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.

Reported by sparse:

    security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
                                    (different signedness)
    security/selinux/xfrm.c:359:39:    expected unsigned int
                                       [usertype] *scontext_len
    security/selinux/xfrm.c:359:39:    got int *

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: wrapped commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/test: use after free in register_test_dev_kmod()

[ Upstream commit dc0ce6cc4b133f5f2beb8b47dacae13a7d283c2c ]

The "test_dev" pointer is freed but then returned to the caller.

Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pNFS: Fix another issue with a list iterator pointing to the head

[ Upstream commit 7c9d845f0612e5bcd23456a2ec43be8ac43458f1 ]

In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.

Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.

Reported-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Fixes: 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/x25: Fix null-ptr-deref caused by x25_disconnect

[ Upstream commit 7781607938c8371d4c2b243527430241c62e39c2 ]

When the link layer is terminating, x25->neighbour will be set to NULL
in x25_disconnect(). As a result, it could cause null-ptr-deref bugs in
x25_sendmsg(),x25_recvmsg() and x25_connect(). One of the bugs is
shown below.

    (Thread 1)                 |  (Thread 2)
x25_link_terminated()          | x25_recvmsg()
 x25_kill_by_neigh()           |  ...
  x25_disconnect()             |  lock_sock(sk)
   ...                         |  ...
   x25->neighbour = NULL //(1) |
   ...                         |  x25->neighbour->extended //(2)

The code sets NULL to x25->neighbour in position (1) and dereferences
x25->neighbour in position (2), which could cause null-ptr-deref bug.

This patch adds lock_sock() in x25_kill_by_neigh() in order to synchronize
with x25_sendmsg(), x25_recvmsg() and x25_connect(). What`s more, the
sock held by lock_sock() is not NULL, because it is extracted from x25_list
and uses x25_list_lock to synchronize.

Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: dcb: default to returning -EOPNOTSUPP

[ Upstream commit 1521db37f0d42334a88e8ff28198a27d1ed5cd7b ]

Clang static analysis reports this issue
qlcnic_dcb.c:382:10: warning: Assigned value is
  garbage or undefined
  mbx_out = *val;
          ^ ~~~~

val is set in the qlcnic_dcb_query_hw_capability() wrapper.
If there is no query_hw_capability op in dcp, success is
returned without setting the val.

For this and similar wrappers, return -EOPNOTSUPP.

Fixes: 14d385b99059 ("qlcnic: dcb: Query adapter DCB capabilities.")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: broadcom: Fix brcm_fet_config_init()

[ Upstream commit bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d ]

A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.

This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.

After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.

If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.

Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen: fix is_xen_pmu()

[ Upstream commit de2ae403b4c0e79a3410e63bc448542fbb9f9bfc ]

is_xen_pmu() is taking the cpu number as parameter, but it is not using
it. Instead it just tests whether the Xen PMU initialization on the
current cpu did succeed. As this test is done by checking a percpu
pointer, preemption needs to be disabled in order to avoid switching
the cpu while doing the test. While resuming from suspend() this seems
not to be the case:

[   88.082751] ACPI: PM: Low-level resume complete
[   88.087933] ACPI: EC: EC started
[   88.091464] ACPI: PM: Restoring platform NVS memory
[   88.097166] xen_acpi_processor: Uploading Xen processor PM info
[   88.103850] Enabling non-boot CPUs ...
[   88.108128] installing Xen timer for CPU 1
[   88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[   88.122256] caller is is_xen_pmu+0x12/0x30
[   88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G        W         5.16.13-2.fc32.qubes.x86_64 #1
[   88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[   88.145930] Call Trace:
[   88.148757]  <TASK>
[   88.151193]  dump_stack_lvl+0x48/0x5e
[   88.155381]  check_preemption_disabled+0xde/0xe0
[   88.160641]  is_xen_pmu+0x12/0x30
[   88.164441]  xen_smp_intr_init_pv+0x75/0x100

Fix that by replacing is_xen_pmu() by a simple boolean variable which
reflects the Xen PMU initialization state on cpu 0.

Modify xen_pmu_init() to return early in case it is being called for a
cpu other than cpu 0 and the boolean variable not being set.

Fixes: bf6dfb154d93 ("xen/PMU: PMU emulation code")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options

[ Upstream commit f2dd495a8d589371289981d5ed33e6873df94ecc ]

Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.

Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.

Based on patch from Sven Auhagen.

Fixes: c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: fix divide error in dbNextAG

[ Upstream commit 2cc7cc01c15f57d056318c33705647f87dcd4aab ]

Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.

Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression

Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdbts: fix return value of __setup handler

[ Upstream commit 96c9e802c64014a7716865332d732cc9c7f24593 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
  kgdboc=kbd kgdbts=", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308033255.22118-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdboc: fix return value of __setup handler

[ Upstream commit ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
  kgdboc=kbd kgdbts=", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc: He Zhe <zhe.he@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-serial@vger.kernel.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: hvc: fix return value of __setup handler

[ Upstream commit 53819a0d97aace1425bb042829e3446952a9e8a9 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308024228.20477-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe

[ Upstream commit 89388f8730699c259f8090ec435fb43569efe4ac ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe

[ Upstream commit c09ac191b1f97cfa06f394dbfd7a5db07986cefc ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.

Fixes: 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307115116.25316-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init

[ Upstream commit dab4df9ca919f59e5b9dd84385eaf34d4f20dbb0 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308071155.21114-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: remove unneeded check in decode_devicenotify_args()

[ Upstream commit cb8fac6d2727f79f211e745b16c9abbf4d8be652 ]

[You don't often get email from khoroshilov@ispras.ru. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]

Overflow check in not needed anymore after we switch to kmalloc_array().

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver

[ Upstream commit 6d6ef58c2470da85a99119f74d34216c8074b9f0 ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220112104501.30655-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>