GitHub/exynos8895/android_kernel_samsung_universal8895.git
15 years agodrm/i915: PineView only has LVDS and CRT ports
Zhenyu Wang [Fri, 27 Nov 2009 03:44:36 +0000 (11:44 +0800)]
drm/i915: PineView only has LVDS and CRT ports

PineView only has 2 ports for LVDS and CRT. Don't enable other
ports for it.

Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Don't set up the TV port if it isn't in the BIOS table.
Zhao Yakui [Tue, 24 Nov 2009 01:48:48 +0000 (09:48 +0800)]
drm/i915: Don't set up the TV port if it isn't in the BIOS table.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Don't set up the LVDS if it isn't in the BIOS device table.
Zhao Yakui [Tue, 24 Nov 2009 01:48:47 +0000 (09:48 +0800)]
drm/i915: Don't set up the LVDS if it isn't in the BIOS device table.

We not only check the device type, but also check the addin_offset. If the
addin_offset is zero, it won't be initialized.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
[anholt: hand-applied due to conflicts]

15 years agodrm/i915: Don't set up DP ports that aren't in the BIOS device table.
Zhao Yakui [Tue, 24 Nov 2009 01:48:46 +0000 (09:48 +0800)]
drm/i915: Don't set up DP ports that aren't in the BIOS device table.

Use the child device array to decide whether the given DP output should be
initialized. If the given DP port can't be found in child device array,
it is not present and won't be initialized.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Don't set up HDMI ports that aren't in the BIOS device table.
Zhao Yakui [Tue, 24 Nov 2009 01:48:45 +0000 (09:48 +0800)]
drm/i915: Don't set up HDMI ports that aren't in the BIOS device table.

Use the child device array to decide whether the given HDMI output should be
initialized. If the given HDMI port can't be found in child device array,
it is not present and won't be initialized.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: parse child device from VBT
Zhao Yakui [Tue, 24 Nov 2009 01:48:44 +0000 (09:48 +0800)]
drm/i915: parse child device from VBT

On some laptops there is no HDMI/DP. But the xrandr still reports
several disconnected HDMI/display ports. In such case the user will be
confused.
 >DVI1 disconnected (normal left inverted right x axis y axis)
 >DP1 disconnected (normal left inverted right x axis y axis)
 >DVI2 disconnected (normal left inverted right x axis y axis)
 >DP2 disconnected (normal left inverted right x axis y axis)
 >DP3 disconnected (normal left inverted right x axis y axis)

This patch set is to use the child device parsed in VBT to decide whether
the HDMI/DP/LVDS/TV should be initialized.

Parse the child device from VBT.

The device class type is also added for LFP, TV, HDMI, DP output.

https://bugs.freedesktop.org/show_bug.cgi?id=22785

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Disable pwrctx before unpin and free
Kristian Høgsberg [Wed, 11 Nov 2009 17:19:18 +0000 (12:19 -0500)]
drm/i915: Disable pwrctx before unpin and free

Otherwise the chip may scribble over free memory.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Hold struct_mutex while unreffing pwrctx object
Kristian Høgsberg [Wed, 11 Nov 2009 17:19:17 +0000 (12:19 -0500)]
drm/i915: Hold struct_mutex while unreffing pwrctx object

This also extends the mutex to cover fbc disabling, which is safe.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Unregister i915_wedged debugfs entry using the right key
Kristian Høgsberg [Wed, 11 Nov 2009 17:19:16 +0000 (12:19 -0500)]
drm/i915: Unregister i915_wedged debugfs entry using the right key

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: fix gpio register detection logic for BIOS without VBT
Shaohua Li [Wed, 18 Nov 2009 07:15:02 +0000 (15:15 +0800)]
drm/i915: fix gpio register detection logic for BIOS without VBT

if no VBT is present, crt_ddc_bus will be left at 0, and cause us
to use that for the GPIO register offset. That's never a valid register
offset, so let the "undefined" value be 0 instead of -1.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
[anholt: clarified the commit message a bit]

15 years agodrm/i915: Avoid NULL dereference with component_only tv_modes
Chris Wilson [Fri, 27 Nov 2009 13:06:56 +0000 (13:06 +0000)]
drm/i915: Avoid NULL dereference with component_only tv_modes

In commit d2d9f2324, the guard for a valid video mode was removed. This
caused the regression:

  kernel crash during kms graphic boot on Intel GM4500 platform
  https://bugzilla.redhat.com/show_bug.cgi?id=540218

This patches changes the logic slightly not to rely on a coupled
variable, but to just check whether the video_modes is valid before
dereferencing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Zhenyu Wang <zhenyu.z.wang@intel.com>
[ickle: Actually reference the correct bug report]
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: fixup interrupted overlay switch off calls
Daniel Vetter [Mon, 30 Nov 2009 14:55:49 +0000 (15:55 +0100)]
drm/i915: fixup interrupted overlay switch off calls

When switching to interruptible sleeps in the overlay code, I've
forgotten to recover from interruptions at one site.  This
resulted in the overlay still running when it should have been
switched off. This in turn caused a hang on resume because it
tried to disable the (not-running) overlay in preparation for the
resume modeset.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24980
Tested-by: maximlevitsky@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: overlay: extract some duplicated code
Daniel Vetter [Sat, 25 Apr 2037 08:08:26 +0000 (10:08 +0200)]
drm/i915: overlay: extract some duplicated code

I've suspected some bug there wrt to suspend, but that was not
the case. Clean up the code anyway.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: remove Pineview EOS protection support
Shaohua Li [Wed, 14 Oct 2009 09:19:28 +0000 (17:19 +0800)]
drm/i915: remove Pineview EOS protection support

HW guys have an evaluation about the impact about EOS, and say the impact
is quite small, so they have removed EOS detection support. This patch
removes EOS feature.

revert commit 043029655816ed4cfc2ed247020ef97e5d637392
directly reverting it gives a hunk error, so please use this one.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
[anholt: fixed up commit message for update that the feature's really gone]

15 years agodrm/i915: use msleep for intel_wait_for_vblank
Shaohua Li [Thu, 26 Nov 2009 06:22:41 +0000 (14:22 +0800)]
drm/i915: use msleep for intel_wait_for_vblank

20ms delay is quite big and the routine isn't called in atomic context.
better use msleep to let other tasks run. This can reduce cpu time used
by Xorg, so potentially boost boot.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: handle failure path correctly for lvds
Shaohua Li [Tue, 17 Nov 2009 09:19:23 +0000 (17:19 +0800)]
drm/i915: handle failure path correctly for lvds

In failure path, make sure encoder is cleaned up, otherwise there
is a kernel oops.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Fix LVDS stability issue on Ironlake
Zhenyu Wang [Wed, 25 Nov 2009 05:09:38 +0000 (13:09 +0800)]
drm/i915: Fix LVDS stability issue on Ironlake

In disable sequence, all output ports on PCH have to be disabled
before PCH transcoder, but LVDS port was left always enabled. This
one fixes that by disable LVDS port properly during pipe disable
process, and resolved stability issue seen on Ironlake. Also move
panel fitting disable time just after pipe disable to align with
the spec.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Restore the DPLL calculation logic for 9xx platform
Zhao Yakui [Fri, 20 Nov 2009 03:24:18 +0000 (11:24 +0800)]
drm/i915: Restore the DPLL calculation logic for 9xx platform

The DPLL calculation logic for 9xx platform is changed in:
commit 652c393a3368af84359da37c45afc35a91144960
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Mon Aug 17 13:31:43 2009 -0700

    drm/i915: add dynamic clock frequency control

Maybe we will get the different M/N/P combination with that by using the
previous dpll calculation logic.

So restore the DPLL calculation logic for 9xx platform.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Check whether the LVDS downclock is found in VBT
Zhao Yakui [Fri, 20 Nov 2009 03:24:17 +0000 (11:24 +0800)]
drm/i915: Check whether the LVDS downclock is found in VBT

Enumerate the LVDS panel timing info entry list in VBT to check whether
the LVDS downclock is found. If found, the downclock is also used to switch
dynamically between low and high frequency for LVDS.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Enable LVDS downclock feature through EDID.
Zhao Yakui [Fri, 20 Nov 2009 03:24:16 +0000 (03:24 +0000)]
drm/i915: Enable LVDS downclock feature through EDID.

If more than one mode with the same resolution defined in EDID has different
refresh rate, it is thought that the downclock is found for LVDS.
We will program the different FPx0/1 register so that we can select dynamically
between the low and high frequency.

On the g4x platform we will use the CxSR feature to switch the different
refresh rate if the LVDS downclock feature is supported.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Replace a calloc followed by copying data over it with malloc.
Eric Anholt [Sun, 22 Nov 2009 02:49:37 +0000 (03:49 +0100)]
drm/i915: Replace a calloc followed by copying data over it with malloc.

Execbufs involve quite a bit of payload, to the extent that cache misses
show up in the profiles here, and a suspicion that some of those cachelines
may get evicted and then reloaded in the subsequent copy.

This is still abstracted like drm_calloc_large since we want to check for
size overflow, and because we want to choose between kmalloc and vmalloc
on the fly.  cairo's interface for malloc-with-calloc's-args was used as
the model.

Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agoMerge remote branch 'airlied/drm-next' into drm-intel-next
Eric Anholt [Thu, 5 Nov 2009 23:04:06 +0000 (15:04 -0800)]
Merge remote branch 'airlied/drm-next' into drm-intel-next

15 years agodrm/i915: fix get_core_clock_speed for G33 class desktop chips
Daniel Vetter [Tue, 3 Nov 2009 09:03:34 +0000 (09:03 +0000)]
drm/i915: fix get_core_clock_speed for G33 class desktop chips

Somehow the case for G33 got dropped while porting from ums code.
This made a 400MHz chip into a 133MHz one which resulted in the
unnecessary enabling of double wide pipe mode which in turn
screwed up the overlay code.

Nothing else (than the overlay code) seems to be affected.

This fixes fdo.org bug #24835

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Add display hotplug event on Ironlake
Zhenyu Wang [Tue, 3 Nov 2009 18:57:21 +0000 (18:57 +0000)]
drm/i915: Add display hotplug event on Ironlake

Enable display hotplug irqs from Ibex Peak (PCH).

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Add ACPI OpRegion support for Ironlake
Zhao Yakui [Wed, 28 Oct 2009 05:10:00 +0000 (05:10 +0000)]
drm/i915: Add ACPI OpRegion support for Ironlake

Add the support of ACPI opregion on Ironlake so that the backlight
brightness can be adjusted by using ACPI interface
   >/sys/class/backlight/acpi_video0/brightness

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Zhao Yakui <yakui.zhao@intel.com>
[zhenyuw: cleanups, fix typo for checking GSE irq and convert to
current irq handling logic.]
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: enable self-refresh on 965
Jesse Barnes [Mon, 19 Oct 2009 01:08:17 +0000 (10:08 +0900)]
drm/i915: enable self-refresh on 965

Need to calculate the SR watermark and enable it.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Support 30 bit depth modes
Kristian Høgsberg [Mon, 19 Oct 2009 18:35:30 +0000 (14:35 -0400)]
drm/i915: Support 30 bit depth modes

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: debugfs interface to manually reset the GPU
Chris Wilson [Tue, 13 Oct 2009 21:20:20 +0000 (22:20 +0100)]
drm/i915: debugfs interface to manually reset the GPU

Create a /debug/dri/%d/i915_wedged file to display the current wedged
status, and to enable setting that value. On an i965, this will also
trigger a GPU reset.

Useful in order to attempt to recover from some error conditions that
are not currently caught by the automatic hang detection code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Use a single thread workqueue
Chris Wilson [Wed, 14 Oct 2009 12:40:04 +0000 (13:40 +0100)]
drm/i915: Use a single thread workqueue

Our work is serialised so allocating per-cpu workqueues is overkill and
a waste of resources.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in DVO output code.
Zhao Yakui [Fri, 9 Oct 2009 03:39:43 +0000 (11:39 +0800)]
drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in DVO output code.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Enable the SDVO debug code, which is now under DEBUG_KMS.
Eric Anholt [Tue, 13 Oct 2009 19:23:22 +0000 (12:23 -0700)]
drm/i915: Enable the SDVO debug code, which is now under DEBUG_KMS.

Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS
Zhao Yakui [Fri, 9 Oct 2009 03:39:41 +0000 (11:39 +0800)]
drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS

Replace the DRM_DEBUG with DRM_DEBUG_KMS in output device code.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Replace DRM_DEBUG with DRM_DEBUG_DRIVER
Zhao Yakui [Fri, 9 Oct 2009 03:39:40 +0000 (11:39 +0800)]
drm/i915: Replace DRM_DEBUG with DRM_DEBUG_DRIVER

Replace the DRM_DEBUG with DRM_DEBUG_DRIVER in generic i915 driver.
Then the debug info can be obtained by adding the boot option of
"drm.debug=0x02".

At the same time the debug info in increase/decrease clock is also
printed by using DRM_DEBUG_DRIVER instead of DRM_DEBUG_KMS.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: overlay: kill one more unnecessary uninterruptible sleep
Daniel Vetter [Sun, 4 Oct 2009 13:00:36 +0000 (15:00 +0200)]
drm/i915: overlay: kill one more unnecessary uninterruptible sleep

I've simply overlooked one case in the conversion to interruptible
sleeps. Rectify this.

Also delete a leftover debug printk.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: kill i915_lp_ring_sync
Daniel Vetter [Tue, 15 Sep 2009 20:57:38 +0000 (22:57 +0200)]
drm/i915: kill i915_lp_ring_sync

It's not needed anymore.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: implement interruptible sleeps in the overlay code
Daniel Vetter [Tue, 15 Sep 2009 20:57:37 +0000 (22:57 +0200)]
drm/i915: implement interruptible sleeps in the overlay code

At least for the common case of userspace ioctls. When doing a
modeset operation, the wait is still uninterruptible. But considering
that failing to turn off the overlay when switching off the crtc it's
running on hangs the chip, it doesn't complicate matters _very_
much. There's just an unkillable X in addition to a black screen.
BUG() about it and explain in the code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: implement fastpath for overlay flip waiting
Daniel Vetter [Tue, 15 Sep 2009 20:57:36 +0000 (22:57 +0200)]
drm/i915: implement fastpath for overlay flip waiting

As long as the gpu can keep up, neither the cpu (waiting for gpu)
nore the gpu (waiting for vblank to do an overlay flip) stalls.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: fully switch off overlay when not in use
Daniel Vetter [Tue, 15 Sep 2009 20:57:35 +0000 (22:57 +0200)]
drm/i915: fully switch off overlay when not in use

Now that the cache flushing of the memory based overlay regs works,
we can safely switch off the overlay. Beforehand it was only disabled
(like in userspace).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: implement drmmode overlay support v4
Daniel Vetter [Tue, 15 Sep 2009 20:57:34 +0000 (22:57 +0200)]
drm/i915: implement drmmode overlay support v4

This implements intel overlay support for kms via a device-specific
ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on
dri-devel). We've reached the conclusion that such an infrastructure
only makes sense when multiple kms overlay implementations exists,
which atm don't (and it doesn't look like this is gonna change).

Open issues:
- Runs in sync with the gpu, i.e. unnecessary waiting. I've decided
  to wait on this because the hw tends to hang when changing something
  in this area. I left some dummy functions as infrastructure.
- polyphase filtering uses a static table.
- uses uninterruptible sleeps. Unfortunately the alternatives may
  unnecessarily wedged the hw if/when we timeout too early (and
  userspace only overloaded the batch buffers with stuff worth a few
  secs of gpu time).

Changes since v1:
- fix off-by-one misconception on my side. This fixes fullscreen
  playback.
Changes since v2:
- add underrun detection as spec'ed for i965.
- flush caches properly, fixing visual corruptions.
Changes since v4:
- fix up cache flushing of overlay memory regs.
- killed require_pipe_a logic - it hangs the chip.

Tested-By: diego.abelenda@gmail.com (on a 865G)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[anholt: Resolved against the MADVISE ioctl going in before this one]
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: kill superflous IS_I855 macro
Daniel Vetter [Tue, 15 Sep 2009 20:57:33 +0000 (22:57 +0200)]
drm/i915: kill superflous IS_I855 macro

It is identical to I85X. Use that one instead.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[anholt: fix conflicts against the display function pointer stuff]
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: add i915_lp_ring_sync helper
Daniel Vetter [Tue, 15 Sep 2009 20:57:32 +0000 (22:57 +0200)]
drm/i915: add i915_lp_ring_sync helper

This just waits until the hw passed the current ring position with
cmd execution. This slightly changes the existing i915_wait_request
function to make uninterruptible waiting possible - no point in
returning to userspace while mucking around with the overlay, that
piece of hw is just too fragile.

Also replace a magic 0 with the symbolic constant (and kill the then
superflous comment) while I was looking at the code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm: make drm_mode_object_find typesafe
Daniel Vetter [Tue, 15 Sep 2009 20:57:31 +0000 (22:57 +0200)]
drm: make drm_mode_object_find typesafe

I've wasted half a day hunting a bug that could easily be spotted by
gcc. Prevent this from reoccurring.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: add render standby support
Jesse Barnes [Thu, 8 Oct 2009 17:16:48 +0000 (10:16 -0700)]
drm/i915: add render standby support

Render standy allows the GPU to power down the render unit when idle.
In order for this to work, it needs a page of graphics memory to save
state.  This patch allocates that page and enables the feature on
supported chipsets.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: HDMI hardware workaround for Ironlake
Zhenyu Wang [Mon, 2 Nov 2009 07:52:30 +0000 (07:52 +0000)]
drm/i915: HDMI hardware workaround for Ironlake

This brings some hardware workaround for HDMI port on PCH (Ibex Peak),
which fixes unstable issues like during rotation.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Fix and cleanup DPLL calculation for Ironlake
Zhenyu Wang [Mon, 2 Nov 2009 07:52:29 +0000 (07:52 +0000)]
drm/i915: Fix and cleanup DPLL calculation for Ironlake

When the ideal error range can't be reached, this will safely use
a most closed one. Clean up some dumb codes in DPLL function too.

This fixes DPLL clock issue against one monitor at 1680x1050@60hz.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Avoid potential sleep whilst holding spinlock
Chris Wilson [Tue, 20 Oct 2009 16:29:16 +0000 (16:29 +0000)]
drm/i915: Avoid potential sleep whilst holding spinlock

Miles Lane reported the following error:
2 locks held by cat/4179:
  #0:  (&p->lock){+.+.+.}, at: [<c10a3884>] seq_read+0x25/0x315
  #1:  (&dev_priv->mm.active_list_lock){+.+...}, at: [<c119a854>]
i915_batchbuffer_info+0x2b/0x124
Pid: 4179, comm: cat Not tainted 2.6.32-rc5-git1 #2
Call Trace:
  [<c104874f>] ? __debug_show_held_locks+0x1e/0x20
  [<c1023fb0>] __might_sleep+0xf0/0xf7
  [<c101c393>] kmap+0x17/0x58
  [<c119a8d6>] i915_batchbuffer_info+0xad/0x124
  [<c10a39bf>] seq_read+0x160/0x315
  [<c108fb8c>] ? rw_verify_area+0x98/0xbb
  [<c10a385f>] ? seq_read+0x0/0x315
  [<c1090331>] vfs_read+0x75/0xa9
  [<c10903f9>] sys_read+0x3b/0x5d
  [<c1002a8f>] sysenter_do_call+0x12/0x36

The fix is relatively simple, use the atomic variants of kmap() that
avoid the potential sleep.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agoMerge branch 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
Linus Torvalds [Thu, 5 Nov 2009 18:58:07 +0000 (10:58 -0800)]
Merge branch 'bugfix' of git://git./linux/kernel/git/jeremy/xen

* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: mask extended topology info in cpuid
  xen/hvc: make sure console output is always emitted, with explicit polling

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 5 Nov 2009 18:57:39 +0000 (10:57 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  sysfs: Don't leak secdata when a sysfs_dirent is freed.

15 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 5 Nov 2009 18:56:47 +0000 (10:56 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix kthread_bind() by moving the body of kthread_bind() to sched.c
  sched: Disable SD_PREFER_LOCAL at node level
  sched: Fix boot crash by zalloc()ing most of the cpu masks
  sched: Strengthen buddies and mitigate buddy induced latencies

15 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 5 Nov 2009 18:56:25 +0000 (10:56 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: Fix unmatched locking in ftrace_regex_write()
  ring-buffer: Synchronize resizing buffer with reader lock

15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 5 Nov 2009 18:54:08 +0000 (10:54 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, fs: Fix x86 procfs stack information for threads on 64-bit
  x86: Add reboot quirk for 3 series Mac mini
  x86: Fix printk message typo in mtrr cleanup code
  dma-debug: Fix compile warning with PAE enabled
  x86/amd-iommu: Un__init function required on shutdown
  x86/amd-iommu: Workaround for erratum 63

15 years agoMerge branch 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev
Linus Torvalds [Thu, 5 Nov 2009 18:53:49 +0000 (10:53 -0800)]
Merge branch 'for-linus' of git://linux-m32r.org/git/takata/linux-2.6_dev

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: Should index be positive?
  m32r: bzip2/lzma kernel compression support
  m32r: add NOTES to vmlinux.lds.S to remove .note.gnu.build-id section
  arch/m32r: Use DIV_ROUND_CLOSEST

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Thu, 5 Nov 2009 18:53:24 +0000 (10:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: fix CECCs reporting
  amd64_edac: fix a wrong goto clause in amd64_edac.c

15 years agosgi-gru: decrapfiy options_write() function
Linus Torvalds [Thu, 5 Nov 2009 18:48:30 +0000 (10:48 -0800)]
sgi-gru: decrapfiy options_write() function

Not a single line of actual code in the function was really
fundamentally correct.

Problems ranged from lack of proper range checking, to removing the last
character written (which admittedly is usually '\n'), to not accepting
hex numbers even though the 'show' routine would show the data in that
format.

This tries to do better.

Acked-by: Michael Buesch <mb@bu3sch.de>
Tested-and-acked-by: Jack Steiner <steiner@sgi.com>
Cc: stable@kernel.org
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Michael Gilbert <michael.s.gilbert@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'drm-next' of ../drm-2.6 into drm-next
Dave Airlie [Wed, 4 Nov 2009 22:28:54 +0000 (08:28 +1000)]
Merge branch 'drm-next' of ../drm-2.6 into drm-next

15 years agosysfs: Don't leak secdata when a sysfs_dirent is freed.
Eric W. Biederman [Wed, 4 Nov 2009 10:50:06 +0000 (02:50 -0800)]
sysfs: Don't leak secdata when a sysfs_dirent is freed.

While refreshing my sysfs patches I noticed a leak in the secdata
implementation.  We don't free the secdata when we free the
sysfs dirent.

This is a bug in 2.6.32-rc5 that we really should close.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Wed, 4 Nov 2009 15:05:43 +0000 (07:05 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Ironlake suspend/resume support
  drm/i915: kill warning in intel_find_pll_g4x_dp
  drm/i915: update watermarks before enabling PLLs
  drm/i915: add FIFO watermark support for G4x
  drm/i915: quiet DP i2c init
  drm/i915: fix panel fitting filter coefficient select for Ironlake
  drm/i915: fix to setup display reference clock control on Ironlake
  drm/i915: Install a fence register for fbc on g4x
  drm/i915: save/restore BLC histogram control reg across suspend/resume
  drm/i915: Fix FDI M/N setting according with correct color depth
  drm/i915: disable powersave feature for Ironlake currently
  drm/i915: Fix render reclock availability detection.
  drm/i915: Save and restore the GM45 FBC regs on suspend and resume.
  drm/i915: Set the LVDS_BORDER when using LVDS scaling mode
  drm/i915: disable FBC for Pineview, fixing a boot hang.

15 years agoamd64_edac: fix CECCs reporting
Borislav Petkov [Wed, 4 Nov 2009 13:04:06 +0000 (14:04 +0100)]
amd64_edac: fix CECCs reporting

Shift error type bits properly.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
15 years agoamd64_edac: fix a wrong goto clause in amd64_edac.c
Li Hong [Mon, 19 Oct 2009 08:33:29 +0000 (16:33 +0800)]
amd64_edac: fix a wrong goto clause in amd64_edac.c

In amd64_edac_init(void) in amd64_edac.c, cache_k8_northbridges() is
called before pci_register_driver. If it fails, should exit with err
directly.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
15 years agox86, fs: Fix x86 procfs stack information for threads on 64-bit
Stefani Seibold [Tue, 3 Nov 2009 09:22:40 +0000 (10:22 +0100)]
x86, fs: Fix x86 procfs stack information for threads on 64-bit

This patch fixes two issues in the procfs stack information on
x86-64 linux.

The 32 bit loader compat_do_execve did not store stack
start. (this was figured out by Alexey Dobriyan).

The stack information on a x64_64 kernel always shows 0 kbyte
stack usage, because of a missing implementation of the KSTK_ESP
macro which always returned -1.

The new implementation now returns the right value.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1257240160.4889.24.camel@wall-e>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoftrace: Fix unmatched locking in ftrace_regex_write()
Li Zefan [Tue, 3 Nov 2009 00:55:38 +0000 (08:55 +0800)]
ftrace: Fix unmatched locking in ftrace_regex_write()

When a command is passed to the set_ftrace_filter, then
the ftrace_regex_lock is still held going back to user space.

 # echo 'do_open : foo' > set_ftrace_filter
 (still holding ftrace_regex_lock when returning to user space!)

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AEF7F8A.3080300@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
15 years agoring-buffer: Synchronize resizing buffer with reader lock
Lai Jiangshan [Tue, 3 Nov 2009 11:42:45 +0000 (19:42 +0800)]
ring-buffer: Synchronize resizing buffer with reader lock

We got a sudden panic when we reduced the size of the
ringbuffer.

We can reproduce the panic by the following steps:

echo 1 > events/sched/enable
cat trace_pipe > /dev/null &

while ((1))
do
echo 12000 > buffer_size_kb
echo 512 > buffer_size_kb
done

(not more than 5 seconds, panic ...)

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4AF01735.9060409@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
15 years agodrm/radeon/kms/r700: fix some typos in chip init
Alex Deucher [Tue, 3 Nov 2009 15:04:01 +0000 (10:04 -0500)]
drm/radeon/kms/r700: fix some typos in chip init

Noticed by Andre on IRC.

Also fix up some minor whitespace issues.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: remove some misleading debugging output
Alex Deucher [Tue, 3 Nov 2009 21:10:36 +0000 (16:10 -0500)]
drm/radeon/kms: remove some misleading debugging output

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Wed, 4 Nov 2009 02:16:21 +0000 (18:16 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: limit coop preemption
  cfq-iosched: fix bad return value cfq_should_preempt()
  backing-dev: bdi sb prune should be in the unregister path, not destroy
  Fix bio_alloc() and bio_kmalloc() documentation
  bio_put(): add bio_clone() to the list of functions in the comment

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Wed, 4 Nov 2009 02:15:18 +0000 (18:15 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_via: Remove redundant device ID for VIA VT8261
  drivers/ata/libata: Move dereference after NULL test
  ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2

15 years agodrm/radeon/kms: stop putting VRAM at 0 in MC space on r600s.
Dave Airlie [Tue, 3 Nov 2009 04:54:36 +0000 (14:54 +1000)]
drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s.

The Lenovo W500 laptop hangs inside an SMI on brightness changes,
I thought it just needed the VGA disable but it turned out to require
slightly more work, setting the MC locations up just like the IGP
chip requirements seems to make it all happy again and I can boot
and play with brightness.

We should probably just do this for all chips and give up the VRAM
at 0x0 idea, it never seems to buy us anything but pain.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: disable D1VGA and D2VGA if enabled
Dave Airlie [Tue, 3 Nov 2009 03:23:15 +0000 (13:23 +1000)]
drm/radeon/kms: disable D1VGA and D2VGA if enabled

Once kms is enabled we don't need these, and it causes a problem
with the Lenovo W500 ACPI brightness implementation, it hangs
in a loop inside an SMI.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: Don't RMW CP_RB_CNTL
Alex Deucher [Mon, 2 Nov 2009 21:01:27 +0000 (16:01 -0500)]
drm/radeon/kms: Don't RMW CP_RB_CNTL

Immediate readback seems faulty on some chips.  I
suspect it takes a while to get through the fifo
to the actual register backbone.  There's no need
to read it back, so, just write the driver's copy
of the register's value directly.

Should fix bug 24535 and possibly 24218

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: fix coherency issues on AGP cards.
Dave Airlie [Fri, 30 Oct 2009 03:31:26 +0000 (13:31 +1000)]
drm/radeon/kms: fix coherency issues on AGP cards.

When we are evicting from VRAM->RAM we allocate the ttm object,
but we don't set the caching policy on it before blitting into it.
This means on AGP we end up blitting into cached pages, and
the CPU later flushes out on top of them. This was mostly seen as
font corruption.

The other question is why we don't evict VRAM->GTT in a lot of cases,
this would save us some cache transitions since a lot of objects
that are evicted from VRAM will probably end up being pulled back in
a few operations later, and evicting them to system memory involves
2 unnecessary cache transitions.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agom32r: Should index be positive?
Roel Kluin [Sun, 1 Nov 2009 14:33:06 +0000 (15:33 +0100)]
m32r: Should index be positive?

Index `ipi_num' is signed, test whether it is negative to
make sure we don't get a negative array element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
15 years agom32r: bzip2/lzma kernel compression support
Hirokazu Takata [Thu, 15 Oct 2009 00:21:56 +0000 (09:21 +0900)]
m32r: bzip2/lzma kernel compression support

- Support bzip2 and lzma kernel compression for m32r.
- Clean up arch/m32r/boot/compressed/misc.c.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
15 years agom32r: add NOTES to vmlinux.lds.S to remove .note.gnu.build-id section
Hirokazu Takata [Sun, 4 Oct 2009 15:10:55 +0000 (00:10 +0900)]
m32r: add NOTES to vmlinux.lds.S to remove .note.gnu.build-id section

Building with --build-id option, .note.gnu.build-id section is added
to vmlinux.bin.  But some old buggy binutils creates a huge vmlinux.bin,
and a bootloader fails to boot its zImage as well.

This patch adds a NOTES macro to a linker script vmlinux.ld.S to put
.note.gnu.build-id section into .note section.
Then, the .note section will be removed, because "-R .note" option is
specified in OBJCOPYFLAGS to make a vmlinux.bin binary.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
15 years agoarch/m32r: Use DIV_ROUND_CLOSEST
Julia Lawall [Sun, 2 Aug 2009 08:47:27 +0000 (10:47 +0200)]
arch/m32r: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
15 years agoLinux 2.6.32-rc6
Linus Torvalds [Tue, 3 Nov 2009 19:37:49 +0000 (11:37 -0800)]
Linux 2.6.32-rc6

15 years agosata_via: Remove redundant device ID for VIA VT8261
JosephChan@via.com.tw [Mon, 2 Nov 2009 11:36:08 +0000 (19:36 +0800)]
sata_via: Remove redundant device ID for VIA VT8261

Just remove redundant device ID for VIA VT8261.
The device ID 0x9000 and 0x9040 are redundant (for VT8261).
The 0x9040 is reserved for other usage.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agodrivers/ata/libata: Move dereference after NULL test
Julia Lawall [Sat, 17 Oct 2009 06:41:47 +0000 (08:41 +0200)]
drivers/ata/libata: Move dereference after NULL test

In each case, if the NULL test on qc is needed, then the derefernce
should be after the NULL test.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agoahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2
Mark Nelson [Tue, 3 Nov 2009 09:06:48 +0000 (20:06 +1100)]
ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2

Like the Asus M2A-VM, MSI's K9A2 Platinum (MS-7376) can also support 64bit
DMA. It is a new enough board that all the BIOS releases work correctly with
64bit DMA enabled.

Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agocfq-iosched: limit coop preemption
Shaohua Li [Tue, 3 Nov 2009 19:25:02 +0000 (20:25 +0100)]
cfq-iosched: limit coop preemption

CFQ has an optimization for cooperated applications. if several
io-context have close requests, they will get boost. But the
optimization get abused. Considering thread a, b, which work on one
file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s
+5, ... Both a and b are sequential read, so they can open idle window.
a reads a sector s and goes to idle window and wakeup b. b reads sector
s+1, since in current implementation, cfq_should_preempt() thinks a and
b are cooperators, b will preempt a. b then reads sector s+1 and goes to
idle window and wakeup a. for the same reason, a will preempt b and
reads s+2. a and b will continue the circle. The circle will be very
long, and a and b will occupy whole disk queue. Other applications will
nearly have no chance to run.

Fix this limiting coop preempt until a queue is scheduled normally
again.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agocfq-iosched: fix bad return value cfq_should_preempt()
Jens Axboe [Tue, 3 Nov 2009 19:21:35 +0000 (20:21 +0100)]
cfq-iosched: fix bad return value cfq_should_preempt()

Commit a6151c3a5c8e1ff5a28450bc8d6a99a2a0add0a7 inadvertently reversed
a preempt condition check, potentially causing a performance regression.
Make the meta check correct again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agobacking-dev: bdi sb prune should be in the unregister path, not destroy
Jens Axboe [Tue, 3 Nov 2009 19:18:44 +0000 (20:18 +0100)]
backing-dev: bdi sb prune should be in the unregister path, not destroy

Commit 592b09a42fc3ae6737a0f3ecf4fee42ecd0296f8 was different from
the tested path, in that it moved the bdi super_block prune from
unregister to destroy context. This doesn't fully fix the sync hang
bug on unexpected device removal, as need to prune the bdi cache
pointer before killing flusher thread.

Tested-by: Artur Skawina <art.08.09@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoMerge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91
Linus Torvalds [Tue, 3 Nov 2009 19:15:25 +0000 (11:15 -0800)]
Merge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91

* 'for-linus' of git://github.com/at91linux/linux-2.6-at91:
  at91: at91sam9g45 family: identify several chip versions
  avr32: add two new at91 to cpu.h definition

15 years agoxen: mask extended topology info in cpuid
Jeremy Fitzhardinge [Thu, 22 Oct 2009 23:41:15 +0000 (16:41 -0700)]
xen: mask extended topology info in cpuid

A Xen guest never needs to know about extended topology, and knowing
would just confuse it.

This patch just zeros ebx in leaf 0xb which indicates no topology info,
preventing a crash under Xen on cpus which support this leaf.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
15 years agoxen/hvc: make sure console output is always emitted, with explicit polling
Jeremy Fitzhardinge [Tue, 20 Oct 2009 06:28:21 +0000 (15:28 +0900)]
xen/hvc: make sure console output is always emitted, with explicit polling

We never want to rely on the hvc workqueue to emit output, because the
most interesting output is when the kernel is broken.  This will
improve oops/crash/console message for better debugging.

Instead, we force-poll until all output is emitted.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
15 years agoat91: at91sam9g45 family: identify several chip versions
Nicolas Ferre [Mon, 21 Sep 2009 10:03:56 +0000 (12:03 +0200)]
at91: at91sam9g45 family: identify several chip versions

cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds
the capacity to differentiate Engineering Samples and final lots through the
inclusion of  at91_cpu_fully_identify() and the related chip IDs with chip
version field preserved.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
15 years agoavr32: add two new at91 to cpu.h definition
Nicolas Ferre [Mon, 6 Jul 2009 10:15:12 +0000 (12:15 +0200)]
avr32: add two new at91 to cpu.h definition

Somme common drivers will need those at91 cpu_is_xxx() definitions. As
at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch
that adds those chips to cpu.h in AVR32 architecture.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
15 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 3 Nov 2009 16:09:57 +0000 (08:09 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits)
  MIPS: O32: Fix ppoll
  MIPS: Oprofile: Rename cpu_type from godson2 to loongson2
  MIPS: Alchemy: Fix hang with high-frequency edge interrupts
  MIPS: TXx9: Fix spi-baseclk value
  MIPS: bcm63xx: Set the correct BCM3302 CPU name
  MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store
  MIPS: Avoid potential hazard on Context register
  MIPS: Octeon: Use lockless interrupt controller operations when possible.
  MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity
  MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache
  MIPS: SMTC: Avoid queing multiple reschedule IPIs
  MIPS: GCMP: Avoid accessing registers when they are not present
  MIPS: GIC: Random fixes and enhancements.
  MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start
  MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands
  MIPS: SPRAM: Clean up support code a little
  MIPS: 1004K: Enable SPRAM support.
  MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4
  MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT.
  MIPS: MTI: Fix accesses to device registers on MIPS boards
  ...

15 years agoMerge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro...
Ingo Molnar [Tue, 3 Nov 2009 15:54:14 +0000 (16:54 +0100)]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/linux-2.6-iommu into x86/urgent

15 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Tue, 3 Nov 2009 15:52:57 +0000 (07:52 -0800)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Remove some debug messages producing too much noise
  PM: Fix warning on suspend errors
  PM / Hibernate: Add newline to load_image() fail path
  PM / Hibernate: Fix error handling in save_image()
  PM / Hibernate: Fix blkdev refleaks
  PM / yenta: Split resume into early and late parts (rev. 4)

15 years agoCorrect nr_processes() when CPUs have been unplugged
Ian Campbell [Tue, 3 Nov 2009 10:11:14 +0000 (10:11 +0000)]
Correct nr_processes() when CPUs have been unplugged

nr_processes() returns the sum of the per cpu counter process_counts for
all online CPUs. This counter is incremented for the current CPU on
fork() and decremented for the current CPU on exit(). Since a process
does not necessarily fork and exit on the same CPU the process_count for
an individual CPU can be either positive or negative and effectively has
no meaning in isolation.

Therefore calculating the sum of process_counts over only the online
CPUs omits the processes which were started or stopped on any CPU which
has since been unplugged. Only the sum of process_counts across all
possible CPUs has meaning.

The only caller of nr_processes() is proc_root_getattr() which
calculates the number of links to /proc as
        stat->nlink = proc_root.nlink + nr_processes();

You don't have to be all that unlucky for the nr_processes() to return a
negative value leading to a negative number of links (or rather, an
apparently enormous number of links). If this happens then you can get
failures where things like "ls /proc" start to fail because they got an
-EOVERFLOW from some stat() call.

Example with some debugging inserted to show what goes on:
        # ps haux|wc -l
        nr_processes: CPU0:     90
        nr_processes: CPU1:     1030
        nr_processes: CPU2:     -900
        nr_processes: CPU3:     -136
        nr_processes: TOTAL:    84
        proc_root_getattr. nlink 12 + nr_processes() 84 = 96
        84
        # echo 0 >/sys/devices/system/cpu/cpu1/online
        # ps haux|wc -l
        nr_processes: CPU0:     85
        nr_processes: CPU2:     -901
        nr_processes: CPU3:     -137
        nr_processes: TOTAL:    -953
        proc_root_getattr. nlink 12 + nr_processes() -953 = -941
        75
        # stat /proc/
        nr_processes: CPU0:     84
        nr_processes: CPU2:     -901
        nr_processes: CPU3:     -137
        nr_processes: TOTAL:    -954
        proc_root_getattr. nlink 12 + nr_processes() -954 = -942
          File: `/proc/'
          Size: 0               Blocks: 0          IO Block: 1024   directory
        Device: 3h/3d   Inode: 1           Links: 4294966354
        Access: (0555/dr-xr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root)
        Access: 2009-11-03 09:06:55.000000000 +0000
        Modify: 2009-11-03 09:06:55.000000000 +0000
        Change: 2009-11-03 09:06:55.000000000 +0000

I'm not 100% convinced that the per_cpu regions remain valid for offline
CPUs, although my testing suggests that they do. If not then I think the
correct solution would be to aggregate the process_count for a given CPU
into a global base value in cpu_down().

This bug appears to pre-date the transition to git and it looks like it
may even have been present in linux-2.6.0-test7-bk3 since it looks like
the code Rusty patched in http://lwn.net/Articles/64773/ was already
wrong.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Tue, 3 Nov 2009 15:46:17 +0000 (07:46 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: gpio-keys - use IRQF_SHARED
  Input: winbond-cir - select LEDS_TRIGGERS
  Input: i8042 - try to get stable CTR value when initializing
  Input: atkbd - add a quirk for OQO 01+ multimedia keys

15 years agoMerge branch 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Tue, 3 Nov 2009 15:46:05 +0000 (07:46 -0800)]
Merge branch 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux

* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c
  ARM: S3C2440: mini2440: Fix spare warnings
  ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c
  ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST
  ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test
  ARM: S3C: Fix adc function exports
  ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set
  ARM: S3C24XX: Introduce S3C2442B CPU
  ARM: S3C24XX: Define a macro to avoid compilation error
  ARM: S3C: Add info for supporting circular DMA buffers
  ARM: S3C64XX: Set rate of crystal mux
  ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value

15 years agoMerge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Tue, 3 Nov 2009 15:45:50 +0000 (07:45 -0800)]
Merge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linux

* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-mpc: Do not generate STOP after read.
  i2c: imx: disable clock when it's possible to save power.
  i2c: imx: only imx1 needs disable delay
  i2c: imx: check busy bit when START/STOP

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Tue, 3 Nov 2009 15:45:22 +0000 (07:45 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: add zero-fill for new btree node buffers
  nilfs2: fix irregular checkpoint creation due to data flush
  nilfs2: fix dirty page accounting leak causing hang at write

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 3 Nov 2009 15:44:01 +0000 (07:44 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  mac80211: check interface is down before type change
  cfg80211: fix NULL ptr deref
  libertas if_usb: Fix crash on 64-bit machines
  mac80211: fix reason code output endianness
  mac80211: fix addba timer
  ath9k: fix misplaced semicolon on rate control
  b43: Fix DMA TX bounce buffer copying
  mac80211: fix BSS leak
  rt73usb.c : more ids
  ipw2200: fix oops on missing firmware
  gre: Fix dev_addr clobbering for gretap
  sky2: set carrier off in probe
  net: fix sk_forward_alloc corruption
  pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card
  r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames
  ibmtr: possible Read buffer overflow?
  net: Fix RPF to work with policy routing
  net: fix kmemcheck annotations
  e1000e: rework disable K1 at 1000Mbps for 82577/82578
  e1000e: config PHY via software after resets
  ...

15 years agoMerge branches 'amd-iommu/fixes' and 'dma-debug/fixes' into iommu/fixes
Joerg Roedel [Tue, 3 Nov 2009 11:05:40 +0000 (12:05 +0100)]
Merge branches 'amd-iommu/fixes' and 'dma-debug/fixes' into iommu/fixes

15 years agoPM: Remove some debug messages producing too much noise
Pavel Machek [Wed, 28 Oct 2009 21:56:10 +0000 (22:56 +0100)]
PM: Remove some debug messages producing too much noise

pm_runtime_idle() is somewhat noisy. Remove debug prints.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
15 years agoPM: Fix warning on suspend errors
Romit Dasgupta [Wed, 28 Oct 2009 21:56:02 +0000 (22:56 +0100)]
PM: Fix warning on suspend errors

Fixes the point where we need to complete the power transition when
device suspend fails, so that we don't print warnings about devices
added to the device hierarchy after a failing suspend.

[rjw: Modified changelog.]

Signed-off-by: Romit Dasgupta <romit@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
15 years agoPM / Hibernate: Add newline to load_image() fail path
Jiri Slaby [Wed, 28 Oct 2009 21:55:42 +0000 (22:55 +0100)]
PM / Hibernate: Add newline to load_image() fail path

Finish a line by \n when load_image fails in the middle of loading.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
15 years agoPM / Hibernate: Fix error handling in save_image()
Jiri Slaby [Wed, 28 Oct 2009 21:55:33 +0000 (22:55 +0100)]
PM / Hibernate: Fix error handling in save_image()

There are too many retval variables in save_image(). Thus error return
value from snapshot_read_next() may be ignored and only part of the
snapshot (successfully) written.

Remove 'error' variable, invert the condition in the do-while loop
and convert the loop to use only 'ret' variable.

Switch the rest of the function to consider only 'ret'.

Also make sure we end printed line by \n if an error occurs.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>