Stefan Raspl [Mon, 21 Jan 2013 02:30:20 +0000 (02:30 +0000)]
qeth: Support VEPA mode
The existing port isolation mode 'forward' will now verify that the adjacent
switch port supports the required reflective relay (RR) mode. This patch adds
the required error handling for the cases where enabling port isolation mode
'forward' can now fail.
Furthermore, once established, we never fall back from one of the port
isolation modes to a non-isolated mode without further user-interaction.
This includes cases where the isolation mode was enabled successfully, but
ceases to work e.g. due to configuration changes at the switch port.
Finally, configuring an isolation mode with the device being offline
will make onlining the device fail permanently upon errors encountered until
either errors are resolved or the isolation mode is changed by the user to a
different mode.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Raspl [Mon, 21 Jan 2013 02:30:19 +0000 (02:30 +0000)]
qeth: Remove unused exports
Remove exports that are not used anywhere else.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Raspl [Mon, 21 Jan 2013 02:30:18 +0000 (02:30 +0000)]
qeth: Fix retry logic in hardsetup
The previous code did never retry any idx setup unless retries were done
for device offline/online at the beginning of the function.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Jan 2013 18:50:10 +0000 (13:50 -0500)]
Merge branch 'ipv6_ndisc'
YOSHIFUJI Hideaki says:
====================
This series of changes basically clean up NDISC logic,
especially on sender side.
We originally do For NS/NA/RS:
1) build temporary ICMPv6 header
2) ndisc_build_skb() with temporary ICMPv6 header and rather
criptic arguments.
- Calculate total length and allocate sk_buff
- Build IPv6 header.
- copy ICMPv6 header, additional data and ND options.
- Fill-in ICMPv6 checksum.
Here, structures defined for message format was not used
at all, it is difficult to understand what is being sent,
and it was not generic.
3) __ndisc_send()
- Allocate temporary dst.
- Send it.
Several issues:
- We could not defer decision if we should/can send some ND
option.
- It is hard to see the packet format at a glance.
- ICMPv6 header was built as temporary variable, and then
copied to the buffer.
- Some code path for Redirect was not shared.
With these patches, we do:
1) Calculate (or estimate) message length and option length.
2) Allocate skb (via new ndisc_skb_alloc()).
3) Fill-in ICMPv6 message directly using compound literals.
4) Fill-in ICMPv6 checksum
5) Build IPv6 header (including length)
6) Send the packet (via ndisc_send_skb()).
- allocate temporary dst and send it.
- We can defer calculating real length of the packet.
For example, we can give up filling some option at when
filling in.
- Message is built directly without temporary buffer.
- Structures defined for message format is easier to understand
what is being built.
- NS/NA/RS/Redirect share same logic.
- Reduced code/data size:
text data bss dec hex filename
265407 14133 3488 283028 45194 old/net/ipv6/ipv6.o
264955 14109 3488 282552 44fb8 new/net/ipv6/ipv6.o
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:49:25 +0000 (06:49 +0000)]
ndisc: Use compound literals to build redirect message.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:49:17 +0000 (06:49 +0000)]
ndisc: Break down ndisc_build_skb() and build message directly.
Construct NS/NA/RS message directly using C99 compound literals.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:49:13 +0000 (06:49 +0000)]
ndisc: Break down __ndisc_send().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:49:08 +0000 (06:49 +0000)]
ndisc: Fill in ICMPv6 checksum and IPv6 header in ndisc_send_skb().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:49:03 +0000 (06:49 +0000)]
ndisc: Use ndisc_send_skb() for redirect.
Reuse dst if one is attached with skb.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:58 +0000 (06:48 +0000)]
ndisc: Remove icmp6h argument from ndisc_send_skb().
skb_transport_header() (thus icmp6_hdr()) is available here,
use it.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:53 +0000 (06:48 +0000)]
ndisc: Make ndisc_fill_xxx_option() for sk_buff.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:49 +0000 (06:48 +0000)]
ndisc: Calculate message body length and option length separately.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:44 +0000 (06:48 +0000)]
ndisc: Reset skb->trasport_headner inside ndisc_alloc_send_skb().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:39 +0000 (06:48 +0000)]
ndisc: Defer building IPv6 header.
Build ICMPv6 message first and make buffer management easier;
we can use skb->len when filling checksum in ICMPv6 header,
and then build IP header with length field.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:34 +0000 (06:48 +0000)]
ndisc: Remove dev argument for ndisc_send_skb().
Since we have skb->dev, use it.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:29 +0000 (06:48 +0000)]
ndisc: Set skb->dev and skb->protocol inside ndisc_alloc_skb().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:24 +0000 (06:48 +0000)]
ndisc: Simplify arguments for ip6_nd_hdr().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:19 +0000 (06:48 +0000)]
ipv6: Unshare ip6_nd_hdr() and change return type to void.
- move ip6_nd_hdr() to its users' source files.
In net/ipv6/mcast.c, it will be called ip6_mc_hdr().
- make return type to void since this function never fails.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:14 +0000 (06:48 +0000)]
ndisc: Introduce ndisc_alloc_skb() helper.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:09 +0000 (06:48 +0000)]
ndisc: Introduce ndisc_fill_redirect_hdr_option().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:48:03 +0000 (06:48 +0000)]
ndisc: Use skb_linearize() instead of pskb_may_pull(skb, skb->len).
Suggested by Eric Dumazet <edumazet@google.com>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:47:56 +0000 (06:47 +0000)]
ndisc: Move ndisc_opt_addr_space() to include/net/ndisc.h.
This also makes ndisc_opt_addr_data() and ndisc_fill_addr_option()
use ndisc_opt_addr_space().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Mon, 21 Jan 2013 06:47:50 +0000 (06:47 +0000)]
ndisc: Reduce number of arguments for ndisc_fill_addr_option().
Add pointer to struct net_device (dev) and remove
data_len (= dev->addr_len) and addr_type (= dev->type).
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thierry Reding [Mon, 21 Jan 2013 09:38:39 +0000 (10:38 +0100)]
net: ethernet: davinci: Fix build breakage
The correct name of the transmit DMA channel field in struct emac_priv
is txchan, not txch.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Sat, 19 Jan 2013 22:03:07 +0000 (22:03 +0000)]
firewire net: Use LL_RESERVED_SPACE(), HH_DATA_OFF().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Sat, 19 Jan 2013 21:43:40 +0000 (21:43 +0000)]
firewire net: Ensure checksumming in upper layer.
It is wrong to set skb->ip_summed to CHECKSUM_UNNECESSARY unless
the device has already checked it.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ming Lei [Sat, 19 Jan 2013 01:32:01 +0000 (01:32 +0000)]
usbnet: pegasus: set wakeup enable in set_wol
This patch calls device_set_wakeup_enable() inside set_wol
callback, so that turning on WOL from user mode utility
can make the 'wakeup' of pegasus device to be enabled, then
remote wakeup may be enabled before putting into sleep.
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Petko Manolov <petkan@users.sourceforge.net>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 17 Jan 2013 05:26:07 +0000 (05:26 +0000)]
net/mlx4_en: remove redundant code
remove redundant code from build_inline_wqe()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-By: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Sun, 20 Jan 2013 07:39:18 +0000 (07:39 +0000)]
ndisc: Make several arguments for ndisc_send_na() boolean.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Sun, 20 Jan 2013 07:38:52 +0000 (07:38 +0000)]
ipv6: Optimize ipv6_addr_is_ll_all_{nodes,routers}().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Sun, 20 Jan 2013 07:39:07 +0000 (07:39 +0000)]
ipv6: Optimize ipv6_addr_is_solict_mult().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Sun, 20 Jan 2013 07:39:00 +0000 (07:39 +0000)]
ipv6: Introduce ipv6_addr_is_solict_mult() to check Solicited Node Multicast Addresses.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki [Sun, 20 Jan 2013 17:38:38 +0000 (02:38 +0900)]
ipv6: Make ipv6_addr_is_XXX() return boolean.
ipv6_addr_is_{multicast,ll_all_nodes,ll_all_routers,isatap}()
return boolean.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wu Fengguang [Fri, 18 Jan 2013 15:36:56 +0000 (15:36 +0000)]
net: asix: ax88772_unbind() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Jan 2013 15:52:45 +0000 (10:52 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:
====================
This series contains updates to ixgbe, ixgbevf and igb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Jan 2013 15:47:47 +0000 (10:47 -0500)]
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Included changes:
- sysfs removal postponement during interface un-registration
- random32() function renaming
- struct refactoring
- kernel doc improvement
- deleyed_work initialisation clean up work
- copyright year and internal version number update
- kernel doc improvement
Signed-off-by: David S. Miller <davem@davemloft.net>
Antonio Quartulli [Thu, 3 Jan 2013 11:22:10 +0000 (12:22 +0100)]
batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Antonio Quartulli [Fri, 4 Jan 2013 02:05:31 +0000 (03:05 +0100)]
batman-adv: update copyright years
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Simon Wunderlich [Fri, 11 Jan 2013 09:19:51 +0000 (10:19 +0100)]
batman-adv: postpone sysfs removal when unregistering
When processing the unregister notify for a hard interface, removing
the sysfs files may lead to a circular deadlock (rtnl mutex <->
s_active).
To overcome this problem, postpone the sysfs removal in a worker.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Akinobu Mita [Mon, 24 Dec 2012 02:14:07 +0000 (11:14 +0900)]
batman-adv: rename random32() to prandom_u32()
Use more preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Antonio Quartulli <ordex@autistici.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 13:45:12 +0000 (21:45 +0800)]
batman-adv: kernel doc for types.h
Thanks to Sven Eckelmann and Simon Wunderlich for their support.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 09:03:25 +0000 (17:03 +0800)]
batman-adv: rename batadv_claim struct to make clear it is used by bla
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 09:03:24 +0000 (17:03 +0800)]
batman-adv: rename batadv_backbone_gw struct to make clear it is used by bla
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 09:03:23 +0000 (17:03 +0800)]
batman-adv: rename batadv_recvlist_node struct to make clear it is used by vis
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 09:03:22 +0000 (17:03 +0800)]
batman-adv: rename batadv_if_list_entry struct to make clear it is used by vis
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 09:03:21 +0000 (17:03 +0800)]
batman-adv: group tt type definitions together
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 09:03:20 +0000 (17:03 +0800)]
batman-adv: mark debug_log struct as bat_priv only struct
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Marek Lindner [Tue, 25 Dec 2012 09:03:19 +0000 (17:03 +0800)]
batman-adv: align kernel doc properly
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Antonio Quartulli [Tue, 25 Dec 2012 12:14:37 +0000 (13:14 +0100)]
batman-adv: a delayed_work has to be initialised once
A delayed_work struct does not need to be initialized each
every time before being enqueued. Therefore the
INIT_DELAYED_WORK() macro should be used during the
initialization process only.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Akeem G. Abodunrin [Tue, 8 Jan 2013 18:31:12 +0000 (18:31 +0000)]
igb: Copyright string update to year 2013
This patch updates Copyright year to 2013
v2: Changed Copyright year on Makefile
Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 8 Jan 2013 07:01:03 +0000 (07:01 +0000)]
igb: Replace rmb in Tx cleanup with read_barrier_depends
The rmb in the Tx cleanup path is a much stronger barrier than we really need.
All that is really needed is a read_barrier_depends since the location of the
EOP descriptor is dependent on the eop_desc value.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Fri, 4 Jan 2013 07:37:31 +0000 (07:37 +0000)]
ixgbevf: Fix statistics corruption
When the physical function (PF) is reset for any reason the statistics
collection in ixgbevf_update_stats needs to wait to update until after
the reset synchronization ensures that the PF driver is up and running
and is finished with its own reset. Go ahead and clear the link flag to
indicate this when the control message from the PF is received. The
reset synchronization and recovery in the watchdog task will eventually
set the link flag up when the PF has resumed.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Fri, 4 Jan 2013 07:37:26 +0000 (07:37 +0000)]
ixgbevf: Fix link up messages
Use dev_info to log link up/down messages.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Fri, 4 Jan 2013 07:37:20 +0000 (07:37 +0000)]
ixgbevf: Synch out of tree and in tree mailbox interrupt handlers
The out of tree driver and the in kernel driver should use the same
interrupt handling logic for mailbox interrupts. The difference in
the handlers was causing dissimilar behavior between the two drivers
complicating debug and trouble shooting.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 30 Oct 2012 06:01:55 +0000 (06:01 +0000)]
ixgbe: Improve performance and reduce size of ixgbe_tx_map
This change is meant to both improve the performance and reduce the size of
ixgbe_tx_map. To do this I have expanded the work done in the main loop by
pushing first into tx_buffer. This allows us to pull in the dma_mapping_error
check, the tx_buffer value assignment, and the initial DMA value assignment to
the Tx descriptor. The net result is that the function reduces in size by a
little over a 100 bytes and is about 1% or 2% faster.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Wed, 7 Nov 2012 02:34:28 +0000 (02:34 +0000)]
ixgbe: Update ixgbe Tx flags to improve code efficiency
This change is meant to improve the efficiency of the Tx flags in ixgbe by
aligning them with the values that will later be written into either the
cmd_type or olinfo. By doing this we are able to reduce most of these
functions to either just a simple shift followed by an or in the case of
cmd_type, or an and followed by an or in the case of olinfo.
To do this I also needed to change the logic and/or drop some flags. I
dropped the IXGBE_TX_FLAGS_FSO and it was replaced by IXGBE_TX_FLAGS_TSO since
the only place it was ever checked was in conjunction with IXGBE_TX_FLAGS_TSO.
I replaced IXGBE_TX_FLAGS_TXSW with IXGBE_TX_FLAGS_CC, this way we have a
clear point for what the flag is meant to do. Finally the
IXGBE_TX_FLAGS_NO_IFCS was dropped since were are already carrying the data
for that flag in the skb. Instead we can just check the bitflag in the skb.
In order to avoid type conversion errors I also adjusted the locations
where we were switching between CPU and little endian.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 30 Oct 2012 06:01:45 +0000 (06:01 +0000)]
ixgbe: Always use context 0, even for FCoE and TSO
We were spending cycles separating the FCoE and TSO contexts even though we
always overwriting the context anyway. Instead of doing that we can just
use context 0 for all descriptors.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 30 Oct 2012 06:01:40 +0000 (06:01 +0000)]
ixgbe: Make TSO check for CHECKSUM_PARTIAL to avoid skb_is_gso check
This change is meant to reduce the overhead for workloads that are not
using either TSO or checksum offloads. Most of the time the compiler
should jump ahead after failing this check to the VLAN check since in the
ixgbe_tx_csum call we start with that check as well.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
John Fastabend [Fri, 19 Oct 2012 02:34:34 +0000 (02:34 +0000)]
ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes
IEEE DCBx has a mechanism to change the default user priority. In
the normal case the OS can handle this via cgroups, iptables, socket,
options etc.
With SR-IOV and direct assigned VF devices the default priority
needs to be set by the PF device so the inserted VLAN tag is
correct.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Hannes Frederic Sowa [Fri, 18 Jan 2013 09:18:17 +0000 (09:18 +0000)]
ipv6: remove unneeded check to pskb_may_pull in ipip6_rcv
This is already checked by the caller (tunnel64_rcv) and brings ipip6_rcv
in line with ipip_rcv.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Fri, 18 Jan 2013 02:05:03 +0000 (02:05 +0000)]
ndisc: Check NS message length before access.
Check message length before accessing "target" field,
as we do for other types.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Fri, 18 Jan 2013 02:00:24 +0000 (02:00 +0000)]
ipv6: Remove unused neigh argument for icmp6_dst_alloc() and its callers.
Because of rt->n removal, we do not need neigh argument any more.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 17 Jan 2013 21:46:18 +0000 (21:46 +0000)]
enic: change sprintf() to snprintf()
These are copying data into 16 char arrays. They all specify that the
first string can't be more than 11 characters but once you add on the
"-rx-" and the NUL character there isn't space for the %d.
The first string is probably never going to be 11 characters, but if it
is then let's truncate the string instead of corrupting memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Estevam [Thu, 17 Jan 2013 16:46:02 +0000 (16:46 +0000)]
smsc: smc911x: Fix sparse warnings
ioremap returns 'void __iomem *' type.
Fix the following build warnings:
drivers/net/ethernet/smsc/smc911x.c:2079:14: warning: incorrect type in assignment (different address spaces)
drivers/net/ethernet/smsc/smc911x.c:2079:14: expected unsigned int *addr
drivers/net/ethernet/smsc/smc911x.c:2079:14: got void [noderef] <asn:2>*
drivers/net/ethernet/smsc/smc911x.c:2086:18: warning: incorrect type in assignment (different address spaces)
drivers/net/ethernet/smsc/smc911x.c:2086:18: expected void [noderef] <asn:2>*base
drivers/net/ethernet/smsc/smc911x.c:2086:18: got unsigned int *addr
drivers/net/ethernet/smsc/smc911x.c:2091:25: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/smsc/smc911x.c:2091:25: expected void volatile [noderef] <asn:2>*addr
drivers/net/ethernet/smsc/smc911x.c:2091:25: got unsigned int *addr
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Que [Thu, 17 Jan 2013 09:29:49 +0000 (09:29 +0000)]
net: usb: initialize tmp in dm9601.c to avoid warning
In two places, tmp is initialized implicitly by being passed as a
pointer during a function call. However, this is not obvious to the
compiler, which logs a warning.
Signed-off-by: Simon Que <sque@chromium.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Thu, 17 Jan 2013 06:31:34 +0000 (06:31 +0000)]
net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors
When there is heavy transmission traffic in the CPDMA, then Rx descriptors
memory is also utilized as tx desc memory looses all rx descriptors and the
driver stops working then.
This patch adds boundary for tx and rx descriptors in bd ram dividing the
descriptor memory to ensure that during heavy transmission tx doesn't use
rx descriptors.
This patch is already applied to davinci_emac driver, since CPSW and
davici_dmac shares the same CPDMA, moving the boundry seperation from
Davinci EMAC driver to CPDMA driver which was done in the following
commit
commit
86d8c07ff2448eb4e860e50f34ef6ee78e45c40c
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue Jan 3 05:27:47 2012 +0000
net/davinci: do not use all descriptors for tx packets
The driver uses a shared pool for both rx and tx descriptors.
During open it queues fixed number of 128 descriptors for receive
packets. For each received packet it tries to queue another
descriptor. If this fails the descriptor is lost for rx.
The driver has no limitation on tx descriptors to use, so it
can happen during a nmap / ping -f attack that the driver
allocates all descriptors for tx and looses all rx descriptors.
The driver stops working then.
To fix this limit the number of tx descriptors used to half of
the descriptors available, the rx path uses the other half.
Tested on a custom board using nmap / ping -f to the board from
two different hosts.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Ott [Wed, 16 Jan 2013 19:09:48 +0000 (19:09 +0000)]
6lowpan: Handle uncompressed IPv6 packets over 6LoWPAN
Handle the reception of uncompressed packets (dispatch type = IPv6).
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Ott [Wed, 16 Jan 2013 19:09:47 +0000 (19:09 +0000)]
6lowpan: Refactor packet delivery into a function
Refactor the handing of the skb's to the individual lowpan devices into a
function.
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Li [Wed, 16 Jan 2013 16:55:58 +0000 (16:55 +0000)]
net: fec: enable pause frame to improve rx prefomance for 1G network
The limition of imx6 internal bus cause fec can't achieve 1G perfomance.
There will be many packages lost because FIFO over run.
This patch enable pause frame flow control.
Before this patch
iperf -s -i 1
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49773
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 6.35 MBytes 53.3 Mbits/sec
[ 4] 1.0- 2.0 sec 3.39 MBytes 28.5 Mbits/sec
[ 4] 2.0- 3.0 sec 2.63 MBytes 22.1 Mbits/sec
[ 4] 3.0- 4.0 sec 1.10 MBytes 9.23 Mbits/sec
ifconfig
RX packets:46195 errors:1859 dropped:1 overruns:1859 frame:1859
After this patch
iperf -s -i 1
[ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49757
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 49.8 MBytes 418 Mbits/sec
[ 4] 1.0- 2.0 sec 50.1 MBytes 420 Mbits/sec
[ 4] 2.0- 3.0 sec 47.5 MBytes 399 Mbits/sec
[ 4] 3.0- 4.0 sec 45.9 MBytes 385 Mbits/sec
[ 4] 4.0- 5.0 sec 44.8 MBytes 376 Mbits/sec
ifconfig
RX packets:
2348454 errors:0 dropped:16 overruns:0 frame:0
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Stach [Wed, 16 Jan 2013 04:24:07 +0000 (04:24 +0000)]
net: asix: handle packets crossing URB boundaries
ASIX AX88772B started to pack data even more tightly. Packets and the ASIX packet
header may now cross URB boundaries. To handle this we have to introduce
some state between individual calls to asix_rx_fixup().
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Stach [Wed, 16 Jan 2013 04:24:06 +0000 (04:24 +0000)]
net: asix: init ASIX AX88772B MAC from EEPROM
The device comes up with a MAC address of all zeros. We need to read the
initial device MAC from EEPROM so it can be set properly later.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Jan 2013 19:12:11 +0000 (14:12 -0500)]
Merge branch 'intel'
Jeff Kirsher says:
====================
This series contains updates to e1000e and igb. Most notably is the
added timestamp support in e1000e and additional software timestamp
support in igb. As well as, the added thermal data support and SR-IOV
configuration support in igb.
v2- dropped the following patches from the previous 14 patch series
because changes were requested from the community:
e1000e: add support for IEEE-1588 PTP
igb: Report L4 Rx hash via skb->l4_rxhash
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew Vick [Thu, 13 Dec 2012 07:20:36 +0000 (07:20 +0000)]
igb: Use in-kernel PTP_EV_PORT #define
Rather than use an extra #define for something that already exists, use the
kernel #define for the PTP port.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Matthew Vick [Thu, 13 Dec 2012 07:20:37 +0000 (07:20 +0000)]
igb: Free any held skb that should have been timestamped on remove
To prevent a race condition where an skb has been saved to return the Tx
timestamp later and the driver is removed, add a check to determine if we
have an skb stored and, if so, free it.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Matthew Vick [Thu, 13 Dec 2012 07:20:35 +0000 (07:20 +0000)]
igb: Add mechanism for detecting latched hardware Rx timestamp
Add a check against possible Rx timestamp freezing in the hardware via
watchdog mechanism. This situation can occur when an Rx timestamp has been
latched, but the packet has been dropped because the Rx ring is full.
Whenever a packet comes in that should be timestamped, the Rx timestamp
gets latched into the hardware registers and we will store the jiffy value
in the rx_ring. The watchdog will keep track of his own jiffy timer
whenever there is no valid timestamp in the registers.
If the watchdog detects a valid timestamp in the registers, meaning that no
Rx packet has consumed it yet, it will check which time is most recent: the
last time in the watchdog or any time in the rx_rings. If the most recent
"event" was more than 5 seconds ago, it will flush the Rx timestamp and
print a warning message to the syslog.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Matthew Vick [Thu, 13 Dec 2012 07:20:34 +0000 (07:20 +0000)]
igb: Add timeout for PTP Tx work item
When transmitting a packet that must return a Tx timestamp, a work item
gets scheduled to poll for the Tx timestamp being completed in hardware.
Add a timeout on this work item of 15 seconds from when the driver gets the
skb, after which it will stop polling. Report via stats and system log if
this occurs.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Matthew Vick [Thu, 13 Dec 2012 07:20:33 +0000 (07:20 +0000)]
igb: Add support for SW timestamping
Enable SW timestamping for situations where the user may prefer it over HW
timestamping or there may not be HW timestamping.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Carolyn Wyborny [Fri, 7 Dec 2012 03:01:42 +0000 (03:01 +0000)]
igb: Enable hwmon data output for thermal sensors via I2C.
Some of our adapters have internal sensors that report thermal data. This
patch enables reporting of that data via sysfs.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Carolyn Wyborny [Fri, 7 Dec 2012 03:01:16 +0000 (03:01 +0000)]
igb: Add support functions to access thermal data.
Some of our devices have internal sensors for reporting thermal data.
This patch creates the interface to the sensors for exporting via sysfs.
Subsequent patch will actually export the data.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Carolyn Wyborny [Fri, 7 Dec 2012 03:00:30 +0000 (03:00 +0000)]
igb: Add i2c interface to igb.
Some of our adapters have sensors on them accessible via i2c and a private
interface. This patch implements the kernel interface for i2c to those sensors.
Subsequent patches will provide functions to export that data.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Thu, 17 Jan 2013 09:03:06 +0000 (01:03 -0800)]
igb: Enable SR-IOV configuration via PCI sysfs interface
Implement callback in the driver for the new PCI bus driver
interface that allows the user to enable/disable SR-IOV
virtual functions in a device via the sysfs interface.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Bruce Allan [Thu, 27 Dec 2012 08:32:33 +0000 (08:32 +0000)]
e1000e: add support for hardware timestamping on some devices
On 82574, 82583, 82579, I217 and I218 add support for hardware time
stamping of all or no Rx packets and Tx packets which have the
SKBTX_HW_TSTAMP flag set. Update the .get_ts_info ethtool operation to
report the supported time stamping modes, and enable and disable hardware
time stamping with the SIOCSHWTSTAMP ioctl.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Bjorn Helgaas [Thu, 6 Dec 2012 06:40:07 +0000 (06:40 +0000)]
e1000e: Use standard #defines for PCIe Capability ASPM fields
Use the standard #defines for PCIe Capability ASPM fields.
Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but
these are defined for the Linux ASPM interfaces, e.g.,
pci_disable_link_state(), and only coincidentally match the actual register
bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match
the register bit.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: e1000-devel@lists.sourceforge.net
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Bruce Allan [Wed, 5 Dec 2012 08:40:59 +0000 (08:40 +0000)]
e1000e: add ethtool .get_eee/.set_eee
Add the ability to query and set Energy Efficient Ethernet parameters via
ethtool for applicable devices.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:54:05 +0000 (12:54 +0000)]
ipv6: Complete neighbour entry removal from dst_entry.
CC: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:54:00 +0000 (12:54 +0000)]
ipv6: Do not depend on rt->n in ip6_finish_output2().
If neigh is not found, create new one.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:55 +0000 (12:53 +0000)]
ipv6: Do not depend on rt->n in ip6_dst_lookup_tail().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:48 +0000 (12:53 +0000)]
ipv6: Introduce rt6_nexthop() to select nexthop address.
For RTF_GATEWAY route, return rt->rt6i_gateway.
Otherwise, return 2nd argument (destination address).
This will be used by following patches which remove rt->n
dependency patches in ip6_dst_lookup_tail() and ip6_finish_output2().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:43 +0000 (12:53 +0000)]
ipv6: Do not depend on rt->n in rt6_probe().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:38 +0000 (12:53 +0000)]
ipv6: Do not depend on rt->n in rt6_check_neigh().
CC: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:32 +0000 (12:53 +0000)]
ipv6: Do not depend on rt->n in ip6_pol_route().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:22 +0000 (12:53 +0000)]
ndisc: Introduce __ipv6_neigh_lookup_noref().
This function, which looks up neighbour entry for an IPv6 address
without touching refcnt, will be used for patches to remove
dependency on rt->n (neighbour entry in rt6_info).
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:15 +0000 (12:53 +0000)]
ipv6 route: Dump gateway based on RTF_GATEWAY flag and rt->rt6i_gateway.
Do not depend on rt->n.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:09 +0000 (12:53 +0000)]
ndisc: Remove tbl argument for __ipv6_neigh_lookup().
We can refer to nd_tbl directly.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Thu, 17 Jan 2013 12:53:02 +0000 (12:53 +0000)]
ndisc: Update neigh->updated with write lock.
neigh->nud_state and neigh->updated are under protection of
neigh->lock.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 17 Jan 2013 03:26:21 +0000 (03:26 +0000)]
bnx2x: fix GRO parameters
bnx2x does an internal GRO pass but doesn't provide gso_segs, thus
breaking qdisc_pkt_len_init() in case ingress qdisc is used.
We store gso_segs in NAPI_GRO_CB(skb)->count, where tcp_gro_complete()
expects to find the number of aggregated segments.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vipul Pandya [Wed, 16 Jan 2013 23:29:59 +0000 (23:29 +0000)]
cxgb3: Fix Tx csum stats
Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Baltieri [Wed, 16 Jan 2013 21:30:17 +0000 (22:30 +0100)]
ipv6: fix ipv6_prefix_equal64_half mask conversion
Fix the 64bit optimized version of ipv6_prefix_equal to convert the
bitmask to network byte order only after the bit-shift.
The bug was introduced in:
3867517 ipv6: 64bit version of ipv6_prefix_equal().
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Tue, 15 Jan 2013 07:16:35 +0000 (07:16 +0000)]
net: increase fragment memory usage limits
Increase the amount of memory usage limits for incomplete
IP fragments.
Arguing for new thresh high/low values:
High threshold = 4 MBytes
Low threshold = 3 MBytes
The fragmentation memory accounting code, tries to account for the
real memory usage, by measuring both the size of frag queue struct
(inet_frag_queue (ipv4:ipq/ipv6:frag_queue)) and the SKB's truesize.
We want to be able to handle/hold-on-to enough fragments, to ensure
good performance, without causing incomplete fragments to hurt
scalability, by causing the number of inet_frag_queue to grow too much
(resulting longer searches for frag queues).
For IPv4, how much memory does the largest frag consume.
Maximum size fragment is 64K, which is approx 44 fragments with
MTU(1500) sized packets. Sizeof(struct ipq) is 200. A 1500 byte
packet results in a truesize of 2944 (not 2048 as I first assumed)
(44*2944)+200 = 129736 bytes
The current default high thresh of 262144 bytes, is obviously
problematic, as only two 64K fragments can fit in the queue at the
same time.
How many 64K fragment can we fit into 4 MBytes:
4*2^20/((44*2944)+200) = 32.34 fragment in queues
An attacker could send a separate/distinct fake fragment packets per
queue, causing us to allocate one inet_frag_queue per packet, and thus
attacking the hash table and its lists.
How many frag queue do we need to store, and given a current hash size
of 64, what is the average list length.
Using one MTU sized fragment per inet_frag_queue, each consuming
(2944+200) 3144 bytes.
4*2^20/(2944+200) = 1334 frag queues -> 21 avg list length
An attack could send small fragments, the smallest packet I could send
resulted in a truesize of 896 bytes (I'm a little surprised by this).
4*2^20/(896+200) = 3827 frag queues -> 59 avg list length
When increasing these number, we also need to followup with
improvements, that is going to help scalability. Simply increasing
the hash size, is not enough as the current implementation does not
have a per hash bucket locking.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Bernat [Wed, 16 Jan 2013 21:55:49 +0000 (22:55 +0100)]
sk-filter: Add ability to lock a socket filter program
While a privileged program can open a raw socket, attach some
restrictive filter and drop its privileges (or send the socket to an
unprivileged program through some Unix socket), the filter can still
be removed or modified by the unprivileged program. This commit adds a
socket option to lock the filter (SO_LOCK_FILTER) preventing any
modification of a socket filter program.
This is similar to OpenBSD BIOCLOCK ioctl on bpf sockets, except even
root is not allowed change/drop the filter.
The state of the lock can be read with getsockopt(). No error is
triggered if the state is not changed. -EPERM is returned when a user
tries to remove the lock or to change/remove the filter while the lock
is active. The check is done directly in sk_attach_filter() and
sk_detach_filter() and does not affect only setsockopt() syscall.
Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log