Andy Gospodarek [Tue, 23 Jun 2015 17:45:37 +0000 (13:45 -0400)]
net: ipv4 sysctl option to ignore routes when nexthop link is down
This feature is only enabled with the new per-interface or ipv4 global
sysctls called 'ignore_routes_with_linkdown'.
net.ipv4.conf.all.ignore_routes_with_linkdown = 0
net.ipv4.conf.default.ignore_routes_with_linkdown = 0
net.ipv4.conf.lo.ignore_routes_with_linkdown = 0
...
When the above sysctls are set, will report to userspace that a route is
dead and will no longer resolve to this nexthop when performing a fib
lookup. This will signal to userspace that the route will not be
selected. The signalling of a RTNH_F_DEAD is only passed to userspace
if the sysctl is enabled and link is down. This was done as without it
the netlink listeners would have no idea whether or not a nexthop would
be selected. The kernel only sets RTNH_F_DEAD internally if the
interface has IFF_UP cleared.
With the new sysctl set, the following behavior can be observed
(interface p8p1 is link-down):
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 dead linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 dead linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
90.0.0.1 via 70.0.0.2 dev p7p1 src 70.0.0.1
cache
local 80.0.0.1 dev lo src 80.0.0.1
cache <local>
80.0.0.2 via 10.0.5.2 dev p9p1 src 10.0.5.15
cache
While the route does remain in the table (so it can be modified if
needed rather than being wiped away as it would be if IFF_UP was
cleared), the proper next-hop is chosen automatically when the link is
down. Now interface p8p1 is linked-up:
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
192.168.56.0/24 dev p2p1 proto kernel scope link src 192.168.56.2
90.0.0.1 via 80.0.0.2 dev p8p1 src 80.0.0.1
cache
local 80.0.0.1 dev lo src 80.0.0.1
cache <local>
80.0.0.2 dev p8p1 src 80.0.0.1
cache
and the output changes to what one would expect.
If the sysctl is not set, the following output would be expected when
p8p1 is down:
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
Since the dead flag does not appear, there should be no expectation that
the kernel would skip using this route due to link being down.
v2: Split kernel changes into 2 patches, this actually makes a
behavioral change if the sysctl is set. Also took suggestion from Alex
to simplify code by only checking sysctl during fib lookup and
suggestion from Scott to add a per-interface sysctl.
v3: Code clean-ups to make it more readable and efficient as well as a
reverse path check fix.
v4: Drop binary sysctl
v5: Whitespace fixups from Dave
v6: Style changes from Dave and checkpatch suggestions
v7: One more checkpatch fixup
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Gospodarek [Tue, 23 Jun 2015 17:45:36 +0000 (13:45 -0400)]
net: track link-status of ipv4 nexthops
Add a fib flag called RTNH_F_LINKDOWN to any ipv4 nexthops that are
reachable via an interface where carrier is off. No action is taken,
but additional flags are passed to userspace to indicate carrier status.
This also includes a cleanup to fib_disable_ip to more clearly indicate
what event made the function call to replace the more cryptic force
option previously used.
v2: Split out kernel functionality into 2 patches, this patch simply
sets and clears new nexthop flag RTNH_F_LINKDOWN.
v3: Cleanups suggested by Alex as well as a bug noticed in
fib_sync_down_dev and fib_sync_up when multipath was not enabled.
v5: Whitespace and variable declaration fixups suggested by Dave.
v6: Style fixups noticed by Dave; ran checkpatch to be sure I got them
all.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Tue, 23 Jun 2015 14:26:04 +0000 (10:26 -0400)]
net: switchdev: ignore unsupported bridge flags
switchdev_port_bridge_getlink() queries SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS
attributes, but a driver doesn't need to implement this in order to get
bridge link information.
So error out only on errors different than -EOPNOTSUPP.
(This is a follow-up patch for
7d4f8d8.)
Fixes:
8793d0a664a8 ("switchdev: add new switchdev_port_bridge_getlink")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Fedin [Tue, 23 Jun 2015 14:51:06 +0000 (17:51 +0300)]
net: Cavium: Fix MAC address setting in shutdown state
This bug pops up with NetworkManager on Fedora 21. NetworkManager tends to
stop the interface (nicvf_stop() is called) before changing settings. In
stopped state MAC cannot be sent to a PF. However, when the interface is
restarted (nicvf_open() is called), we ping the PF using NIC_MBOX_MSG_READY
message, and the PF replies back with old MAC address, overriding what we
had after MAC setting from userspace. As a result, we cannot set MAC
address using NetworkManager.
This patch introduces special tracking of MAC change in stopped state so
that the correct new MAC address is sent to a PF when interface is reopen.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell [Wed, 24 Jun 2015 07:29:51 +0000 (17:29 +1000)]
drivers: net: xgene: fix for ACPI support without ACPI
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 24 Jun 2015 07:42:48 +0000 (00:42 -0700)]
Merge branch 'mlx-next'
Or Gerlitz says:
====================
Mellanox NIC drivers update, June 23 2015
This series has two fixes from Eran to his recent SRIOV counters work in
mlx4 and few more updates from Saeed and Achiad to the mlx5 Ethernet
code. All fixes here relate to net-next code, so no need for -stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Tue, 23 Jun 2015 14:14:22 +0000 (17:14 +0300)]
net/mlx5e: Prefetch skb data on RX
Prefetch the 1st cache line used by the buffer pointed by
the skb linear data.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Achiad Shochat [Tue, 23 Jun 2015 14:14:21 +0000 (17:14 +0300)]
net/mlx5e: Pop cq outside mlx5e_get_cqe
Separate between mlx5e_get_cqe() and mlx5_cqwq_pop(), this helps for
better code readability and better CQ buffer management.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Achiad Shochat [Tue, 23 Jun 2015 14:14:20 +0000 (17:14 +0300)]
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
Use container_of() instead.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Achiad Shochat [Tue, 23 Jun 2015 14:14:19 +0000 (17:14 +0300)]
net/mlx5e: Remove extra spaces
Coding Style fix, remove extra spaces.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Achiad Shochat [Tue, 23 Jun 2015 14:14:18 +0000 (17:14 +0300)]
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
In order to save PCI BW consumed by TX CQEs and to reduce the amount of
CPU cache misses caused by TX CQE reading, we request TX CQE generation
only when skb->xmit_more=0.
As a consequence of the above, a single TX CQE may now indicate the
transmission completion of multiple TX SKBs.
This also handles a problem introduced in commit
b1b8105ebf41 "net/mlx5e:
Support NETIF_F_SG" where we didn't ask for NOP completions while the
driver didn't have the proper code to handle this case.
Fixes:
b1b8105ebf41 ('net/mlx5e: Support NETIF_F_SG')
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Achiad Shochat [Tue, 23 Jun 2015 14:14:17 +0000 (17:14 +0300)]
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
NOP completion SKBs are always NULL.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Achiad Shochat [Tue, 23 Jun 2015 14:14:16 +0000 (17:14 +0300)]
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
It is already assigned at mlx5e_build_rq_param()
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Tue, 23 Jun 2015 14:14:15 +0000 (17:14 +0300)]
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
Instead of counting number of gso fragments, we can use
skb_shinfo(skb)->gso_segs.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Tue, 23 Jun 2015 14:14:14 +0000 (17:14 +0300)]
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
To save per-packet calculations, we use the following static mappings:
1) priv {channel, tc} to netdev txq (used @mlx5e_selec_queue())
2) netdev txq to priv sq (used @mlx5e_xmit())
Thanks to these static mappings, no more need for a separate implementation
of ndo_start_xmit when multiple TCs are configured.
We believe the performance improvement of such separation would be negligible, if any.
The previous way of dynamically calculating the above mappings required
allocating more TX queues than actually used (@alloc_etherdev_mqs()),
which is now no longer needed.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Tue, 23 Jun 2015 14:14:13 +0000 (17:14 +0300)]
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
Under SRIOV, the port rx/tx bytes/packets statistics should by read
from the HW instead of using the PF netdevice SW accounting. This is
needed in order to get the full port statistics and not just the PF
own ones
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Tue, 23 Jun 2015 14:14:12 +0000 (17:14 +0300)]
net/mlx4_en: Fix off-by-four in ethtool
NUM_ALL_STATS was not updated with the new four entries, instead
NUM_FLOW_STATS was updated, fix it. that caused off-by-four for all
counters below pf_*_*.
Fixes:
b42de4d01264 ('net/mlx4_en: Show PF own statistics via ethtool')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Jun 2015 14:19:27 +0000 (07:19 -0700)]
Merge branch 'xgene-next'
Suman Tripathi says:
====================
drivers: net: xgene: Fix the ACPI support for RGMII/SGMII0/XFI ethernet interfaces of APM X-Gene SoC.
====================
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suman Tripathi [Tue, 23 Jun 2015 09:17:17 +0000 (14:47 +0530)]
drivers: net: xgene: Check for IS_ERR rather than NULL for clock.
This patches fixes the code to check for IS_ERR rather
than NULL for clock interface.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suman Tripathi [Tue, 23 Jun 2015 09:17:16 +0000 (14:47 +0530)]
drivers: net: xgene: Add ACPI support for SGMII0 and XFI1 interface of 2nd H/W version of APM X-Gene SoC ethernet controller.
This patch adds the ACPI support for SGMII0 and XFI1 interface of
2nd H/W version of APM X-Gene SoC ethernet controller.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suman Tripathi [Tue, 23 Jun 2015 09:17:15 +0000 (14:47 +0530)]
drivers: net: xgene: Implement the backward compatibility with the old and new firmware w.r.t Tx completion IRQ interrupt.
This patch implements the backward compatibility with the old firmware where
the Tx completion IRQ interrupt was absent whereas incase of new firmware
the Tx completion IRQ interrupt is present.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suman Tripathi [Tue, 23 Jun 2015 09:17:14 +0000 (14:47 +0530)]
drivers: net: xgene: Fix the ACPI support for RGMII/SGMII0/XFI interface of APM X-Gene SoC ethernet controller.
This patch implements couple of fixes to support ACPI for RGMII/SGMII0/XFI
interface of APM X-Gene SoC ethernet controller driver. This patch uses
the _SUN acpi object to fetch the port-id information whereas the FDT uses
port-id binding for port-id information.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Noam Camus [Tue, 23 Jun 2015 08:43:53 +0000 (11:43 +0300)]
NET: Add ezchip ethernet driver
Simple LAN device for debug or management purposes.
Device supports interrupts for RX and TX(completion).
Device does not have DMA ability.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Tal Zilcer <talz@ezchip.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nimrod Andy [Tue, 23 Jun 2015 07:32:51 +0000 (15:32 +0800)]
net: fec: init MAC prior to mii bus probe
Below case causes mii bus probe failed:
ifconfig eth0 down -> suspend/resume with Mega/fax mix off -> ifconfig eth0 up
In i.MX6SX/i.MX7D chip, Mega/fast mix off feature is supported that means most of
SOC power will be off including ENET MAC for power saving. Once ENET MAC power
off, all initialized MAC registers reset to default, so in the case, it must
init MAC prior to mii bus probe.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anish Bhatt [Tue, 23 Jun 2015 00:44:35 +0000 (17:44 -0700)]
dcb : Fix incorrect documentation for struct dcb_app
While IEEE and CEE use the same structure to store apps, the selector
and priority fields for both are different. Only the priority field is
explained, add documentation explaining how the selector field differs
for both.
cgdcbxd code shows an example of how selector fields differ.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Thu, 11 Jun 2015 18:20:42 +0000 (11:20 -0700)]
switchdev: change BUG_ON to WARN for attr set failure case
This particular BUG_ON condition was checking for attr set err in the
COMMIT phase, which isn't expected (it's a driver bug if PREPARE phase is
OK but COMMIT fails). But BUG_ON() is too strong for this case, so change
to WARN(). BUG_ON() would be warranted if the system was corrupted beyond
repair, but this is not the case here.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Jun 2015 13:56:32 +0000 (06:56 -0700)]
Merge branch 'switchdev-vlan'
Scott Feldman says:
====================
switchdev; add VLAN support for port's bridge_getlink
One more missing piece of the puzzle. Add vlan dump support to switchdev
port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how
to show the vlans installed on the bridge and the device , but (until now)
no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK
msg. Before this patch, "bridge vlan show":
$ bridge -c vlan show
port vlan ids
sw1p1 30-34 << bridge side vlans
57
sw1p1 << device side vlans (missing)
sw1p2 57
sw1p2
sw1p3
sw1p4
br0 None
(When the port is bridged, the output repeats the vlan list for the vlans
on the bridge side of the port and the vlans on the device side of the
port. The listing above show no vlans for the device side even though they
are installed).
After this patch:
$ bridge -c vlan show
port vlan ids
sw1p1 30-34 << bridge side vlan
57
sw1p1 30-34 << device side vlans
57
3840 PVID
sw1p2 57
sw1p2 57
3840 PVID
sw1p3 3842 PVID
sw1p4 3843 PVID
br0 None
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Mon, 22 Jun 2015 07:27:17 +0000 (00:27 -0700)]
switchdev; add VLAN support for port's bridge_getlink
One more missing piece of the puzzle. Add vlan dump support to switchdev
port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how
to show the vlans installed on the bridge and the device , but (until now)
no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK
msg. Before this patch, "bridge vlan show":
$ bridge -c vlan show
port vlan ids
sw1p1 30-34 << bridge side vlans
57
sw1p1 << device side vlans (missing)
sw1p2 57
sw1p2
sw1p3
sw1p4
br0 None
(When the port is bridged, the output repeats the vlan list for the vlans
on the bridge side of the port and the vlans on the device side of the
port. The listing above show no vlans for the device side even though they
are installed).
After this patch:
$ bridge -c vlan show
port vlan ids
sw1p1 30-34 << bridge side vlan
57
sw1p1 30-34 << device side vlans
57
3840 PVID
sw1p2 57
sw1p2 57
3840 PVID
sw1p3 3842 PVID
sw1p4 3843 PVID
br0 None
I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func.
switchdev support adds an obj dump for VLAN objects, using the same
call-back scheme as FDB dump. Support included for both compressed and
un-compressed vlan dumps.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Mon, 22 Jun 2015 07:27:16 +0000 (00:27 -0700)]
switchdev: rename vlan vid_start to vid_begin
Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maninder Singh [Mon, 22 Jun 2015 07:09:16 +0000 (12:39 +0530)]
packet: remove handling of tx_ring
Remove handling of tx_ring in prb_setup_retire_blk_timer
for TPACKET_V3 because init_prb_bdqc is called only for zero tx_ring
and thus prb_setup_retire_blk_timer for zero tx_ring only.
And also in functon init_prb_bdqc there is no usage of tx_ring.
Thus removing tx_ring from init_prb_bdqc.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Suggested-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Gortmaker [Sun, 21 Jun 2015 20:28:02 +0000 (16:28 -0400)]
drivers/net: remove all references to obsolete Ethernet-HOWTO
This howto made sense in the 1990s when users had to manually configure
ISA cards with jumpers or vendor utilities, but with the implementation
of PCI it became increasingly less and less relevant, to the point where
it has been well over a decade since I last updated it. And there is
no value in anyone else taking over updating it either.
However the references to it continue to spread as boiler plate text
from one Kconfig file into the next. We are not doing end users any
favours by pointing them at this old document, so lets kill it with
fire, once and for all, to hopefully stop any further spread.
No code is changed in this commit, just Kconfig help text.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Jun 2015 13:49:29 +0000 (06:49 -0700)]
Merge branch 'stmmac-rk3368'
Heiko Stuebner says:
====================
net: stmmac: dwmac-rk: add support for rk3368
Apart from small cleanups, this series provides support for the dwmac
on the new rk3368 ARM64 soc.
Tested on a R88 board using a RMII phy.
Changes since v1:
- Adapt to changes resulting from patch
d42202dce002 ("net: stmmac:
dwmac-rk: Don't add function name in info or err messages")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Stübner [Sun, 21 Jun 2015 19:52:54 +0000 (21:52 +0200)]
net: stmmac: dwmac-rk: add rk3368-specific data
Add constants and callback functions for the dwmac on rk3368 socs.
As can be seen, the base structure is the same, only registers and
the bits in them moved slightly.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Stübner [Sun, 21 Jun 2015 19:52:53 +0000 (21:52 +0200)]
net: stmmac: dwmac-rk: abstract access to mac settings in GRF
The mac settings like RGMII/RMII, speeds etc are done in the so called
"General Register Files", contain numerous other settings as well and
always seem to change between Rockchip SoCs. Therefore abstract the
register accesses into a per-soc ops struct to make this reusable on
other Rockchip SoCs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Stübner [Sun, 21 Jun 2015 19:52:52 +0000 (21:52 +0200)]
net: stmmac: dwmac-rk: Fix clk rate when provided by soc
The first iteration of the dwmac-rk support did access an intermediate
clock directly below the pll selector. This was removed in a subsequent
revision, but the clock and one invocation remained. This results in
the driver trying to set the rate of a non-existent clock when the soc
and not some external source provides the phy clock for RMII phys.
So set the rate of the correct clock and remove the remaining now
completely unused definition.
Fixes:
436f5ae08f9d ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Stübner [Sun, 21 Jun 2015 19:52:51 +0000 (21:52 +0200)]
net: stmmac: dwmac-rk: remove unused gpio register defines
In a first version the driver did want to do some gpio wiggling, which
of course never made it into the kernel, but somehow these register
defines where forgotten. Remove them, as they shouldn't be here.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 20 Jun 2015 19:31:29 +0000 (21:31 +0200)]
dsa: mv88x6xxx: Zero statistics counters
Zero the statistics counters when setting up the global
registers. Otherwise the counters will remain from the last boot if
the power has not been removed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Jun 2015 13:33:51 +0000 (06:33 -0700)]
Merge branch 'dsa-mv88e6xxx-debugfs'
Andrew Lunn says:
====================
debugfs for mv88e6xxx
This patchset adds some debugfs files for seeing into a mv88e6xxx
family of switch chips.
DB T/P Vec State Addr
003 Port 008 7 00:22:02:00:18:44
003 Port 008 6 80:ee:73:83:60:27
005 Port 020 7 94:10:3e:80:bc:f3
0f8 Port 001 6 8e:25:13:53:44:de
This walks all possible entries, so is a bit slow, but is always
correct.
Target Port
0 15
1 15
2 15
3 15
4 15
5 15
6 15
7 15
8 15
9 15
-->snip<--
31 15
A rather boring example, since i only have one switch here. But this shows
the routing between multiple switches.
GLOBAL GLOBAL2 0 1 2 3 4 5 6
0: c804 0 1e4f 100f 100f 1e4f 1e0f e07 e07
1: fe 0 3 3 3 3 3 c03e c03f
2: 0 ffff 0 0 0 0 0 0 0
3: 0 ffff 1721 1721 1721 1721 1721 1721 1721
4: 6000 258 433 431 431 433 433 373f 433
5: 0 ff 0 0 0 0 0 0 0
6: c000 1f0f 2026 2025 2023 3020 4020 501f 6020
7: 0 707f 0 0 0 0 0 0 0
8: 0 7800 2080 2080 2080 2080 2080 2080 2080
9: 0 1600 1 1 1 1 1 1 1
a: 148 0 0 0 0 0 0 0 0
b: 4000 1000 1 2 4 8 10 20 40
c: 0 7f 0 0 0 0 0 0 0
d: ffff 5f3 0 0 0 0 0 0 0
e: ffff 6 0 0 0 0 0 0 0
f: ffff f00 dada dada dada dada dada dada dada
10: 0 0 0 0 0 0 0 0 0
11: 0 0 0 0 0 0 0 0 0
12: 5555 0 0 0 0 0 0 0 0
13: 5555 0 1a 0 0 1df0 0 1e07 0
14: aaaa 400 0 0 0 0 0 0 0
15: aaaa 0 0 0 0 0 0 0 0
16: ffff 0 6011 6011 6011 6011 33 33 0
17: ffff 0 0 0 0 0 0 0 0
18: fa41 1844 3210 3210 3210 3210 3210 3210 3210
19: 0 1e1 7654 7654 7654 7654 7654 7654 7654
1a: 5550 0 0 0 0 0 0 0 0
1b: 1fb f869 8000 8000 8000 8000 8000 8000 8000
1c: 0 0 0 0 0 0 0 0 0
1d: c00 0 0 0 0 0 0 0 0
1e: 0 0 0 0 0 0 0 0 0
1f: 0 0 0 0 0 0 0 0 0
All the switch registers which are directly accessible.
Statistic Port 0 Port 1 Port 2 Port 3 Port 4 Port 5 Port 6
in_good_octets: 2176 0 0
4263711 0 499540 0
in_bad_octets: 46050 0 0 50196 0 0 0
in_unicast: 0 0 0 7693 0 7691 0
in_broadcasts: 0 0 0 0 0 3 0
in_multicasts: 34 0 0 0 0 27 0
in_pause: 0 0 0 0 0 0 0
in_undersize: 0 0 0 0 0 0 0
in_fragments: 45 0 0 2 0 0 0
in_oversize: 0 0 0 0 0 0 0
in_jabber: 0 0 0 0 0 0 0
in_rx_error: 0 0 0 0 0 0 0
in_fcs_error: 159 0 0 37 0 0 0
out_octets: 808 0 0 496608 336
4267159 0
out_unicast: 0 0 0 7691 0 7693 0
out_broadcasts: 1 0 0 3 0 0 0
out_multicasts: 9 0 0 6 4 34 0
out_pause: 0 0 0 0 0 0 0
excessive: 0 0 0 0 0 0 0
collisions: 0 0 0 0 0 0 0
deferred: 0 0 0 0 0 0 0
single: 0 0 0 0 0 0 0
multiple: 0 0 0 0 0 0 0
out_fcs_error: 0 0 0 0 0 0 0
late: 0 0 0 0 0 0 0
hist_64bytes: 36 0 0 7577 0 7574 0
hist_65_127bytes: 53 0 0 241 4 298 0
hist_128_255bytes: 50 0 0 12 0 10 0
hist_256_511bytes: 43 0 0 8 0 2 0
hist_512_1023bytes: 18 0 0 7573 0 7564 0
hist_1024_max_bytes: 3 0 0 19 0 0 0
sw_in_discards: 0 0 0 0 0 0 0
sw_in_filtered: 0 0 0 0 0 0 0
sw_out_filtered: 34 0 0 7693 0 7721 0
Of particular interest here is that you get to see all ports,
including the CPU port and any DSA ports. You cannot get statistics
for these ports via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 20 Jun 2015 16:42:33 +0000 (18:42 +0200)]
dsa: mv88x6xxx: Add debugfs interface for scratch registers
Allow the contents of the scratch registers to be shown in debugfs.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 20 Jun 2015 16:42:32 +0000 (18:42 +0200)]
dsa: mv88x6xxx: Add debugfs interface for device map
The device map is used to route packets between cascaded switches.
Add dumping a switches device map via debugfs.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 20 Jun 2015 16:42:31 +0000 (18:42 +0200)]
dsa: mv88x6xxx: Add debugfs interface for statistics
Allow the contents of the statistics counters to be shown in debugfs.
This is particularly useful for the cpu and dsa ports, which cannot be
seen using ethtools -S.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 20 Jun 2015 16:42:30 +0000 (18:42 +0200)]
dsa: mv88x6xxx: Refactor getting a single statistic
Move the code to retrieve a statistics counter into a function of its
own, so it can later be reused.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 20 Jun 2015 16:42:29 +0000 (18:42 +0200)]
dsa: mv88e6xxx: Add debugfs interface for ATU
Dump the Address Translation Unit via a file in debugfs.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 20 Jun 2015 16:42:28 +0000 (18:42 +0200)]
dsa: mv88e6xxx: Add debugfs interface for registers
Allow the contents of the registers to be shown in debugfs.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Fri, 19 Jun 2015 20:38:29 +0000 (13:38 -0700)]
vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)
Make the driver understand adapter version 2.
Cc: Rachel Lunnon <rachel_lunnon@stormagic.com>
Signed-off-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Fri, 19 Jun 2015 20:37:03 +0000 (13:37 -0700)]
vmxnet3: Fix memory leaks in rx path (fwd)
If rcd length was zero, the page used for frag was not being released. It
was being replaced with a newly allocated page. This change takes care
of that memory leak.
Signed-off-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Fri, 19 Jun 2015 20:36:02 +0000 (13:36 -0700)]
vmxnet3: Register shutdown handler for device (fwd)
Implement a handler for pci shutdown so that the driver has an
opportunity to make sure that device is quiesced before the PCI
switches to legacy IRQs. This way the possibility of
"screaming interrupt" is avoided.
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Fri, 19 Jun 2015 19:03:39 +0000 (14:03 -0500)]
netfilter: nf_qeueue: Drop queue entries on nf_unregister_hook
Add code to nf_unregister_hook to flush the nf_queue when a hook is
unregistered. This guarantees that the pointer that the nf_queue code
retains into the nf_hook list will remain valid while a packet is
queued.
I tested what would happen if we do not flush queued packets and was
trivially able to obtain the oops below. All that was required was
to stop the nf_queue listening process, to delete all of the nf_tables,
and to awaken the nf_queue listening process.
> BUG: unable to handle kernel paging request at
0000000100000001
> IP: [<
0000000100000001>] 0x100000001
> PGD
b9c35067 PUD 0
> Oops: 0010 [#1] SMP
> Modules linked in:
> CPU: 0 PID: 519 Comm: lt-nfqnl_test Not tainted
> task:
ffff8800b9c8c050 ti:
ffff8800ba9d8000 task.ti:
ffff8800ba9d8000
> RIP: 0010:[<
0000000100000001>] [<
0000000100000001>] 0x100000001
> RSP: 0018:
ffff8800ba9dba40 EFLAGS:
00010a16
> RAX:
ffff8800bab48a00 RBX:
ffff8800ba9dba90 RCX:
ffff8800ba9dba90
> RDX:
ffff8800b9c10128 RSI:
ffff8800ba940900 RDI:
ffff8800bab48a00
> RBP:
ffff8800b9c10128 R08:
ffffffff82976660 R09:
ffff8800ba9dbb28
> R10:
dead000000100100 R11:
dead000000200200 R12:
ffff8800ba940900
> R13:
ffffffff8313fd50 R14:
ffff8800b9c95200 R15:
0000000000000000
> FS:
00007fb91fc34700(0000) GS:
ffff8800bfa00000(0000) knlGS:
0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
> CR2:
0000000100000001 CR3:
00000000babfb000 CR4:
00000000000007f0
> Stack:
>
ffffffff8206ab0f ffffffff82982240 ffff8800bab48a00 ffff8800b9c100a8
>
ffff8800b9c10100 0000000000000001 ffff8800ba940900 ffff8800b9c10128
>
ffffffff8206bd65 ffff8800bfb0d5e0 ffff8800bab48a00 0000000000014dc0
> Call Trace:
> [<
ffffffff8206ab0f>] ? nf_iterate+0x4f/0xa0
> [<
ffffffff8206bd65>] ? nf_reinject+0x125/0x190
> [<
ffffffff8206dee5>] ? nfqnl_recv_verdict+0x255/0x360
> [<
ffffffff81386290>] ? nla_parse+0x80/0xf0
> [<
ffffffff8206c42c>] ? nfnetlink_rcv_msg+0x13c/0x240
> [<
ffffffff811b2fec>] ? __memcg_kmem_get_cache+0x4c/0x150
> [<
ffffffff8206c2f0>] ? nfnl_lock+0x20/0x20
> [<
ffffffff82068159>] ? netlink_rcv_skb+0xa9/0xc0
> [<
ffffffff820677bf>] ? netlink_unicast+0x12f/0x1c0
> [<
ffffffff82067ade>] ? netlink_sendmsg+0x28e/0x650
> [<
ffffffff81fdd814>] ? sock_sendmsg+0x44/0x50
> [<
ffffffff81fde07b>] ? ___sys_sendmsg+0x2ab/0x2c0
> [<
ffffffff810e8f73>] ? __wake_up+0x43/0x70
> [<
ffffffff8141a134>] ? tty_write+0x1c4/0x2a0
> [<
ffffffff81fde9f4>] ? __sys_sendmsg+0x44/0x80
> [<
ffffffff823ff8d7>] ? system_call_fastpath+0x12/0x6a
> Code: Bad RIP value.
> RIP [<
0000000100000001>] 0x100000001
> RSP <
ffff8800ba9dba40>
> CR2:
0000000100000001
> ---[ end trace
08eb65d42362793f ]---
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Fri, 19 Jun 2015 15:41:21 +0000 (10:41 -0500)]
netfilter: nftables: Do not run chains in the wrong network namespace
Currenlty nf_tables chains added in one network namespace are being
run in all network namespace. The issues are myriad with the simplest
being an unprivileged user can cause any network packets to be dropped.
Address this by simply not running nf_tables chains in the wrong
network namespace.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pankaj Gupta [Fri, 19 Jun 2015 14:17:53 +0000 (19:47 +0530)]
macvtap: Increase limit of macvtap queues
Macvtap should be compatible with tuntap for
maximum number of queues.
commit '
baf71c5c1f80d82e92924050a60b5baaf97e3094 (tuntap:
Increase the number of queues in tun.)' removes
the limitations and increases number of queues in tuntap.
Now, Its safe to increase number of queues in Macvtap as well.
This patch also modifies 'macvtap_del_queues' function
to avoid extra memory allocation in stack.
Changes from v1->v2 :
Michael S. Tsirkin, Jason Wang :
Better way to use linked list to
avoid use of extra memory in stack.
Sergei Shtylyov : Specify dependent commit's summary.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Wagner [Fri, 19 Jun 2015 14:00:44 +0000 (16:00 +0200)]
bpf: BPF based latency tracing
BPF offers another way to generate latency histograms. We attach
kprobes at trace_preempt_off and trace_preempt_on and calculate the
time it takes to from seeing the off/on transition.
The first array is used to store the start time stamp. The key is the
CPU id. The second array stores the log2(time diff). We need to use
static allocation here (array and not hash tables). The kprobes
hooking into trace_preempt_on|off should not calling any dynamic
memory allocation or free path. We need to avoid recursivly
getting called. Besides that, it reduces jitter in the measurement.
CPU 0
latency : count distribution
1 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 166723 |*************************************** |
4096 -> 8191 : 19870 |*** |
8192 -> 16383 : 6324 | |
16384 -> 32767 : 1098 | |
32768 -> 65535 : 190 | |
65536 -> 131071 : 179 | |
131072 -> 262143 : 18 | |
262144 -> 524287 : 4 | |
524288 ->
1048575 : 1363 | |
CPU 1
latency : count distribution
1 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 114042 |*************************************** |
4096 -> 8191 : 9587 |** |
8192 -> 16383 : 4140 | |
16384 -> 32767 : 673 | |
32768 -> 65535 : 179 | |
65536 -> 131071 : 29 | |
131072 -> 262143 : 4 | |
262144 -> 524287 : 1 | |
524288 ->
1048575 : 364 | |
CPU 2
latency : count distribution
1 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 40147 |*************************************** |
4096 -> 8191 : 2300 |* |
8192 -> 16383 : 828 | |
16384 -> 32767 : 178 | |
32768 -> 65535 : 59 | |
65536 -> 131071 : 2 | |
131072 -> 262143 : 0 | |
262144 -> 524287 : 1 | |
524288 ->
1048575 : 174 | |
CPU 3
latency : count distribution
1 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 29626 |*************************************** |
4096 -> 8191 : 2704 |** |
8192 -> 16383 : 1090 | |
16384 -> 32767 : 160 | |
32768 -> 65535 : 72 | |
65536 -> 131071 : 32 | |
131072 -> 262143 : 26 | |
262144 -> 524287 : 12 | |
524288 ->
1048575 : 298 | |
All this is based on the trace3 examples written by
Alexei Starovoitov <ast@plumgrid.com>.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 19 Jun 2015 08:45:50 +0000 (01:45 -0700)]
bridge: multicast: start querier timer when running user-space stp
When STP is running in user-space and querier is configured, the
querier timer is not started when a port goes to a non-blocking state.
This patch unifies the user- and kernel-space stp multicast port enable
path and enables it in all states different from blocking. Note that when a
port goes in BR_STATE_DISABLED it's not enabled because that is handled
in the beginning of the port list loop.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Jun 2015 10:24:58 +0000 (03:24 -0700)]
Merge tag 'nfc-next-4.2-2' of git://git./linux/kernel/git/sameo/nfc-next
NFC 4.2 2nd pull request
This one only contains a one liner fix for a typo that I
introduced while cleaning some of the nfcmrvl patches that
were part of the 1st 4.2 pull request.
David S. Miller [Tue, 23 Jun 2015 10:17:47 +0000 (03:17 -0700)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2015-06-18
Here's the final bluetooth-next pull request for 4.2.
- Cleanups & fixes to 802.15.4 code and related drivers
- Fix btusb driver memory leak
- New USB IDs for Atheros controllers
- Support for BCM4324B3 UART based Broadcom controller
- Fix for Bluetooth encryption key size handling
- Broadcom controller initialization fixes
- Support for Intel controller DDC parameters
- Support for multiple Bluetooth LE advertising instances
- Fix for HCI user channel cleanup path
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Thu, 18 Jun 2015 18:30:54 +0000 (11:30 -0700)]
bonding: Display LACP info only to CAP_NET_ADMIN capable user
Actor and Partner details can be accessed via proc-fs, sys-fs
entries or netlink interface. These interfaces are world readable
at this moment. The earlier patch-series made the LACP communication
secure to avoid nuisance attack from within the same L2 domain but
it did not prevent "someone unprivileged" looking at that information
on host and perform the same act.
This patch essentially avoids spitting those entries if the user
in question does not have enough privileges.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Jun 2015 08:24:48 +0000 (01:24 -0700)]
Merge branch 'macb-sama5d2'
Nicolas Ferre says:
====================
net/macb: add sama5d2 support
This series is basically the support for another flavor of the GEM IP
configuration. It ended up being a series because of some little fixes made to
the binding documentation before adding the new compatibility string.
Bye,
v2: - fix bindings
- add sama5d2 compatibility string to the binding documentation
====================
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cyrille Pitchen [Thu, 18 Jun 2015 14:27:23 +0000 (16:27 +0200)]
net/macb: add config for Atmel sama5d2 SoCs
Add the compatible string for Atmel sama5d2 SoC family as the configuration
options differ from other instances of the GEM.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Thu, 18 Jun 2015 14:27:22 +0000 (16:27 +0200)]
net/macb: bindings doc: add sama5d2 compatibility sting
Add sama5d2 to the biding documentation for this use of the GEM IP.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Thu, 18 Jun 2015 14:27:21 +0000 (16:27 +0200)]
net/macb: bindings doc/trivial: fix sama5d4 comment
On sama5d4, we only have a GEM IP that is configured to do 10/100 Mbits. So the
use of "Gigabit" can be confusing.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Thu, 18 Jun 2015 14:27:20 +0000 (16:27 +0200)]
net/macb: bindings doc: fix compatibility string
In the driver and the DT bindings we use the "atmel" prefix. Fix it in the
binding documentation.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hiroaki SHIMODA [Thu, 18 Jun 2015 11:40:54 +0000 (20:40 +0900)]
inet_diag: Remove _bh suffix in inet_diag_dump_reqs().
inet_diag_dump_reqs() is called from inet_diag_dump_icsk() with BH
disabled. So no need to disable BH in inet_diag_dump_reqs().
Signed-off-by: Hiroaki Shimoda <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shengzhou Liu [Thu, 18 Jun 2015 08:42:47 +0000 (16:42 +0800)]
net/phy: Add support for Realtek RTL8211F
RTL8211F has different register definitions from RTL8211E.
Specially it needs to enable TXDLY in case of RGMII.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Jun 2015 08:03:18 +0000 (01:03 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2015-06-18' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
Major changes:
mwifiex:
* enhancements for AP mode: support verbose information in station
dump command and also information about AP link.
* enable power save by default
brcmfmac:
* fix module reload issue for PCIe
* improving msgbuf protocol for PCIe devices
* rework .get_station() cfg80211 callback operation
* determine interface combinations upon device feature support
ath9k:
* ath9k_htc: add support of channel switch
wil6210:
* add modparam for bcast ring size
* support hidden SSID
* add per-MCS Rx stats
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Wed, 17 Jun 2015 23:08:31 +0000 (16:08 -0700)]
switchdev: fdb filter_dev is always NULL for self (device), so remove check
Remove the filter_dev check when dumping fdb entries, otherwise dump
returns empty list. filter_dev is always passed as NULL when dumping fdbs
on SELF. We want the fdbs installed on the device to be listed in the
dump.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Fixes:
45d4122c ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops")
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 Jun 2015 17:29:07 +0000 (10:29 -0700)]
Merge branch 'bna-cleanups'
Ivan Vecera says:
====================
bna: clean-up 2
Next round of cleaning patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Wed, 17 Jun 2015 16:41:58 +0000 (18:41 +0200)]
bna: remove superfluous parentheses
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Wed, 17 Jun 2015 16:41:57 +0000 (18:41 +0200)]
bna: make pointers to read-only inputs const
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Wed, 17 Jun 2015 16:41:56 +0000 (18:41 +0200)]
bna: remove unnecessary cast of BIT value
BIT value is already unsigned so casting is not necessary.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Wed, 17 Jun 2015 18:07:01 +0000 (11:07 -0700)]
ipv4: include NLM_F_APPEND flag in append route notifications
This patch adds NLM_F_APPEND flag to struct nlmsg_hdr->nlmsg_flags
in newroute notifications if the route add was an append.
(This is similar to how NLM_F_REPLACE is already part of new
route replace notifications today)
This helps userspace determine if the route add operation was
an append.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Herrmann [Wed, 17 Jun 2015 15:14:33 +0000 (17:14 +0200)]
netlink: add API to retrieve all group memberships
This patch adds getsockopt(SOL_NETLINK, NETLINK_LIST_MEMBERSHIPS) to
retrieve all groups a socket is a member of. Currently, we have to use
getsockname() and look at the nl.nl_groups bitmask. However, this mask is
limited to 32 groups. Hence, similar to NETLINK_ADD_MEMBERSHIP and
NETLINK_DROP_MEMBERSHIP, this adds a separate sockopt to manager higher
groups IDs than 32.
This new NETLINK_LIST_MEMBERSHIPS option takes a pointer to __u32 and the
size of the array. The array is filled with the full membership-set of the
socket, and the required array size is returned in optlen. Hence,
user-space can retry with a properly sized array in case it was too small.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Craig Gallek [Wed, 17 Jun 2015 14:59:10 +0000 (10:59 -0400)]
sock_diag: fetch source port from inet_sock
When an inet_sock is destroyed, its source port (sk_num) is set to
zero as part of the unhash procedure. In order to supply a source
port as part of the NETLINK_SOCK_DIAG socket destruction broadcasts,
the source port number must be read from inet_sport instead.
Tested: ss -E
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antonio Borneo [Wed, 17 Jun 2015 11:42:31 +0000 (19:42 +0800)]
net: via/Kconfig: replace USE_OF with OF_???
USE_OF is used as intermediate Kconfig option by few
arch's (ARM, MIPS, Xtensa).
Replace instances of USE_OF outside of arch folders
with proper OF_???.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antonio Borneo [Wed, 17 Jun 2015 11:41:22 +0000 (19:41 +0800)]
net: via-rhine: remove unneeded include file
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhaowei Yuan [Wed, 17 Jun 2015 09:56:27 +0000 (17:56 +0800)]
net: Update out-of-date comment
Struct inet_proto no longer exists, so update the
comment which is out of date.
Signed-off-by: Zhaowei Yuan <zhaowei.yuan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Wed, 17 Jun 2015 09:10:04 +0000 (14:40 +0530)]
cxgb4: Add PCI device ID for custom T522 & T520 adapter
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 16 Jun 2015 23:51:43 +0000 (16:51 -0700)]
Modify Liquidio Kconfig for crc lib
Following patch contains changes in liquidio Kconfig for
selecting LIBCRC32C.
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Tue, 16 Jun 2015 22:36:17 +0000 (15:36 -0700)]
cxgb3: avoid needless buffer copy for firmware
There's no reason to perform a buffer copy for the firmware name. This
also avoids a (currently impossible with current callers) NULL dereference
if there was no matching firmware.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Parri [Tue, 16 Jun 2015 22:16:59 +0000 (00:16 +0200)]
pkt_sched: sch_qfq: remove redundant -if- control statement
The control !hlist_unhashed() in qfq_destroy_agg() is unnecessary
because already performed in hlist_del_init(), so remove it.
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julien Grall [Tue, 16 Jun 2015 19:10:48 +0000 (20:10 +0100)]
net/xen-netback: Don't mix hexa and decimal with 0x in the printf format
Append 0x to all %x in order to avoid while reading when there is other
decimal value in the log.
Also replace some of the hexadecimal print to decimal to uniformize the
format with netfront.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julien Grall [Tue, 16 Jun 2015 19:10:47 +0000 (20:10 +0100)]
net/xen-netback: Remove unused code in xenvif_rx_action
The variables old_req_cons and ring_slots_used are assigned but never
used since commit
1650d5455bd2dc6b5ee134bd6fc1a3236c266b5b "xen-netback:
always fully coalesce guest Rx packets".
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Julien Grall [Tue, 16 Jun 2015 19:10:46 +0000 (20:10 +0100)]
net/xen-netfront: Correct printf format in xennet_get_responses
rx->status is an int16_t, print it using %d rather than %u in order to
have a meaningful value when the field is negative.
Also use %u rather than %x for rx->offset.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabian Frederick [Tue, 16 Jun 2015 18:44:07 +0000 (20:44 +0200)]
net: rds: use for_each_sg() for scatterlist parsing
This patch also renames sg to sglist and aligns function parameters.
See Documentation/DMA-API.txt - Part Id for scatterlist details
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Tue, 16 Jun 2015 16:51:37 +0000 (12:51 -0400)]
packet: free packet_rollover after synchronize_net
Destruction of the po->rollover must be delayed until there are no
more packets in flight that can access it. The field is destroyed in
packet_release, before synchronize_net. Delay using rcu.
Fixes:
0648ab70afe6 ("packet: rollover prepare: per-socket state")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 20 Jun 2015 22:39:40 +0000 (15:39 -0700)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains a final Netfilter pull request for net-next
4.2. This mostly addresses some fallout from the previous pull request, small
netns updates and a couple of new features for nfnetlink_log and the socket
match that didn't get in time for the previous pull request. More specifically
they are:
1) Add security context information to nfnetlink_queue, from Roman Kubiak.
2) Add support to restore the sk_mark into skb->mark through xt_socket,
from Harout Hedeshian.
3) Force alignment of 16 bytes of per cpu xt_counters, from Eric Dumazet.
4) Rename br_netfilter.c to br_netfilter_hooks.c to prepare split of IPv6 code
into a separated file.
5) Move the IPv6 code in br_netfilter into a separated file.
6) Remove unused RCV_SKB_FAIL() in nfnetlink_queue and nfetlink_log, from Eric
Biederman.
7) Two liner to simplify netns logic in em_ipset_match().
8) Add missing includes to net/net_namespace.h to avoid compilation problems
that result from not including linux/netfilter.h in netns headers.
9) Use a forward declaration instead of including linux/proc_fs.h from
netns/netfilter.h
10) Add a new linux/netfilter_defs.h to replace the linux/netfilter.h inclusion
in netns headers.
11) Remove spurious netfilter.h file included in the net tree, also from Eric
Biederman.
12) Fix x_tables compilation warnings on 32 bits platforms that resulted from
recent changes in x_tables counters, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Wed, 17 Jun 2015 21:58:28 +0000 (23:58 +0200)]
netfilter: xtables: fix warnings on 32bit platforms
On 32bit archs gcc complains due to cast from void* to u64.
Add intermediate casts to long to silence these warnings.
include/linux/netfilter/x_tables.h:376:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
include/linux/netfilter/x_tables.h:384:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
include/linux/netfilter/x_tables.h:391:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
include/linux/netfilter/x_tables.h:400:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Fixes:
71ae0dff02d756e ("netfilter: xtables: use percpu rule counters")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W Biederman [Wed, 17 Jun 2015 15:28:35 +0000 (10:28 -0500)]
netfilter: Remove spurios included of netfilter.h
While testing my netfilter changes I noticed several files where
recompiling unncessarily because they unncessarily included
netfilter.h.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 17 Jun 2015 15:28:27 +0000 (10:28 -0500)]
netfilter: don't pull include/linux/netfilter.h from netns headers
This pulls the full hook netfilter definitions from all those that include
net_namespace.h.
Instead let's just include the bare minimum required in the new
linux/netfilter_defs.h file, and use it from the netfilter netns header files.
I also needed to include in.h and in6.h from linux/netfilter.h otherwise we hit
this compilation error:
In file included from include/linux/netfilter_defs.h:4:0,
from include/net/netns/netfilter.h:4,
from include/net/net_namespace.h:22,
from include/linux/netdevice.h:43,
from net/netfilter/nfnetlink_queue_core.c:23:
include/uapi/linux/netfilter.h:76:17: error: field ‘in’ has incomplete type struct in_addr in;
And also explicit include linux/netfilter.h in several spots.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Pablo Neira Ayuso [Wed, 17 Jun 2015 15:28:26 +0000 (10:28 -0500)]
netfilter: use forward declaration instead of including linux/proc_fs.h
We don't need to pull the full definitions in that file, a simple forward
declaration is enough.
Moreover, include linux/procfs.h from nf_synproxy_core, otherwise this hits a
compilation error due to missing declarations, ie.
net/netfilter/nf_synproxy_core.c: In function ‘synproxy_proc_init’:
net/netfilter/nf_synproxy_core.c:326:2: error: implicit declaration of function ‘proc_create’ [-Werror=implicit-function-declaration]
if (!proc_create("synproxy", S_IRUGO, net->proc_net_stat,
^
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Pablo Neira Ayuso [Wed, 17 Jun 2015 15:28:25 +0000 (10:28 -0500)]
net: include missing headers in net/net_namespace.h
Include linux/idr.h and linux/skbuff.h since they are required by objects that
are declared in the net structure.
struct net {
...
struct idr netns_ids;
...
struct sk_buff_head wext_nlevents;
...
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Eric W. Biederman [Wed, 17 Jun 2015 15:28:17 +0000 (10:28 -0500)]
net: sched: Simplify em_ipset_match
em->net is always set and always available, use it in preference
to dev_net(skb->dev).
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Wed, 17 Jun 2015 15:28:10 +0000 (10:28 -0500)]
netfilter: Kill unused copies of RCV_SKB_FAIL
This appears to have been a dead macro in both nfnetlink_log.c and
nfnetlink_queue_core.c since these pieces of code were added in 2005.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Tue, 16 Jun 2015 12:07:03 +0000 (14:07 +0200)]
netfilter: bridge: split ipv6 code into separated file
Resolve compilation breakage when CONFIG_IPV6 is not set by moving the IPv6
code into a separated br_netfilter_ipv6.c file.
Fixes:
efb6de9b4ba0 ("netfilter: bridge: forward IPv6 fragmented packets")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Johan Hedberg [Thu, 18 Jun 2015 18:05:31 +0000 (21:05 +0300)]
Bluetooth: Fix warning of potentially uninitialized adv_instance variable
Rework the logic of checking for a valid adv_instance for non-zero
cp->instance values. Without this change we may get (false positive)
warnings as follows:
>> net/bluetooth/mgmt.c:7294:29: warning: 'adv_instance' may be used
uninitialized in this function [-Wuninitialized]
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Thu, 18 Jun 2015 17:50:08 +0000 (20:50 +0300)]
Bluetooth: Use zalloc when possible
Use zallog for adv_instance allocation instead of kmalloc + memset.
This also fixes the following coccinelle warning:
>> net/bluetooth/hci_core.c:2693:17-24: WARNING: kzalloc should be
used for adv_instance, instead of kmalloc/memset
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Dmitry Tunin [Thu, 18 Jun 2015 17:41:51 +0000 (20:41 +0300)]
Bluetooth: ath3k: Add support of 04ca:300d AR3012 device
BugLink: https://bugs.launchpad.net/bugs/1394368
This device requires new firmware files
AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
/lib/firmware/ar3k/ that are not included in linux-firmware yet.
T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=300d Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Marcel Holtmann [Thu, 18 Jun 2015 16:58:03 +0000 (18:58 +0200)]
Bluetooth: Increment management interface revision
This patch increments the management interface revision due to
introduction of new multi-advertising feature and various bug fixes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Florian Grandel [Thu, 18 Jun 2015 01:16:53 +0000 (03:16 +0200)]
Bluetooth: hci_core: increase max adv inst
Now that all preconditions are present for actual multi-advertising, the
number of allowed advertising instances can be larger than one. This
patch increases the number of allowed advertising instances to 5.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Florian Grandel [Thu, 18 Jun 2015 01:16:52 +0000 (03:16 +0200)]
Bluetooth: hci_core: remove obsolete adv_instance
Now that the obsolete adv_instance is no longer being referenced
anywhere in the code it can be removed without breaking the build.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Florian Grandel [Thu, 18 Jun 2015 01:16:51 +0000 (03:16 +0200)]
Bluetooth: mgmt: multi-adv for mgmt_reenable_advertising()
During service discovery, advertising will be disabled. This patch
ensures that it is correctly being re-enabled, both for configuration
made via set advertising and add advertising, once the scanning
times out.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Florian Grandel [Thu, 18 Jun 2015 01:16:50 +0000 (03:16 +0200)]
Bluetooth: mgmt: multi-adv for trigger_le_scan()
This patch ensures that instance advertising is correctly canceled
before starting a le scan.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log