iio: humidity: hdc100x: correct humidity integration time mask

Apply the correct mask to enable all available humidity integration
times.  Currently, the driver defaults to 6500 and all is okay with that.
However, if 3850 is selected we get a stuck bit and can't change back
to 6500 or select 2500.  (Verified with HDC1008)

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Matt Ranostay <mranostay@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: pressure: bmp280: fix error message for wrong chip id

The bmp280 driver also supports BMP180 which has a different chip id
with BMP280.  The probe routine verifies that the device reports the
correct chip id but the error message is confusing as if BMP280's chip
id is always expected.

Reported-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Matt Ranostay <mranostay@gmail.com>
Cc: Vlad Dogaru <vlad.dogaru@intel.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: light: bh1780: return after write

When writing a value using direct reg access from debugfs
we need to return and not fall through to reading the
value, lest we'll dereference a NULL pointer.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels()

The > here should be >= or we go beyond the end for the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: bmi160: Fix ODR setting

mask and val parameters of regmap_update_bits were reveresed.

Fixes: 77c4ad2d6a9 ("iio: imu: Add initial support for Bosch BMI160")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: bmi160: Fix output data rate for accel

Format is INT_PLUS_MICRO and micro odr part of ODR should
be parts of a micro.

Also s/8000/800 this is obviously a typo.

Fixes: 77c4ad2d6a9 ("iio: imu: Add initial support for Bosch BMI160")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: comedi: mite: tidy up module init/exit

Move the module_init()/module_exit() so they are in the prefered spot
on the line after the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: document the remaining exported functions

For aesthetics, add docbook comments for the exported functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: move the mite dma arm/disarm/reset functions

For aesthetics, move these functions to a more logical spot in the
code and add docbook comments for the exported functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: move mite_prep_dma()

For aesthetics, move this functions to a more logical spot in the
code and add a docbook comment for the exported function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: tidy up mite dma channel request/release

For aesthetics, make the actual "request" function static and change
mite_request_channel_in_range() into a wrapper that calls the internal
function. Change the inline function that requests any free channel
into an export that also calls the internal function.

Move the functions to a more logical spot in the code and add docbook
comments for the exported functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: move the mite ring functions

For aesthetics, move the functions that allocate/free and initialize
the mite dma ring. They are currently kind of scattered around the
code.

Add docbook comments for the exported functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: tidy up kernel messages in mite_steup()

The dev_err() messages with pci_ioremap_bar() fails are just noise.
Remove them.

The 'use_win1' and 'fifo_size' dev_info() messages are also noise
but they may be useful when debugging. Change them to dev_dbg().

Absorb dump_chip_signnature() and change the pr_info() messages
to dev_dbg(). These also might be useful when debugging.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: do mite_steup() as part of mite_attach()

Currently all the drivers that use the mite driver have to call
mite_setup() after allocating and initializing the mite device
with mite_attach().

Move the mite_setup() call into mite_attach() to simplify the
drivers a bit and remove the need for the additional inline and
exported functions.

For aesthetics, move mite_setup2(), and rename it to mite_setup(),
so it's near mite_attach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: document mite_alloc()/mite_detach()

These functions are basically the comedi_driver (*attach)/(*detach)
for this driver.

For aesthetics, rename mite_alloc() to mite_attach() and pass the
comedi_device pointer to it instead of the pci_dev pointer.

Move the functions to the end of the file. This is typically where
a comedi_drivers (*attach)/(*detach) are located.

Add some docbook comments for these exported functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: use prefered form for passing a struct size

Add a local variable to mite_buf_change() so that the prefered
form of passing a struct size, sizeof(*p), can be used.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: introduce mite_free_dma_descs()

Introduce a helper function to handle the dma_free_coherent() of
the mite dma descriptors.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: remove mite member 'channel_allocated'

An allocated mite_channel will have its 'ring' member initialized
to point to the mite_ring that will be used for DMA. A non-allocated
mite_channel will have a 'ring' member set to NULL, either by a
channel release or due to the initial kzalloc of the 'mite' struct.

Refactor the code to use the mite_chan->ring to detect in a channel
is allocated and remove the unnecessary member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: rename mite member 'mite_io_addr'

Rename this member of struct mite to 'mmio' to help shorten the long lines.

Add a local variable for the mite pointer in the ni_pcimio driver
to clarify and shorten the long lines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: tidy up mite_init_ring_descriptors()

Use a local variable for the mite_dma_desc pointer to help clarify
this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: rename mite_ring member 'descriptors'

Rename this member of struct mite_ring to 'descs' to help shorten the
long lines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: rename mite_ring member 'descriptors_dma_addr'

Rename this member of struct mite_ring to 'dma_addr' to help shorten the
long lines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: rename 'struct mite_dma_descriptor_ring'

Rename this name to 'mite_ring' to help shorten the long lines.

In the ni_660x driver, also shorten the private data member 'mite_rings'
to simply 'ring'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: rename 'struct mite_dma_descriptor'

Rename this struct to 'mite_dma_desc' to help shorten the long lines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: rename 'struct mite_struct'

Rename this struct to simply 'mite'. The current name is a bit redundant.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: align code to parentheses

Align wrapped lines to parentheses (if applicable).

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: removed unnecessary cast spaces

Spaces after casts are removed

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: Fixed operator whitespace

added operator white space and parentheses for readability

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: fixed new lines

Added lines between functions in skein_block.c and removed unneeded
lines in skein_block.c

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename result in handle_get_mac_address

This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change data type of result in handle_get_mac_address

This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change handle_get_mac_address's return type to void

When handle_get_mac_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due to have
a single statement.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix comparison style of if statement in handle_get_ip_address

This patch changes conditional comparison of if statement as if (ret)
instead of using if (ret != 0)

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename result in handle_get_ip_address

This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change data type of result in handle_get_ip_address

This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change handle_get_ip_address's return type to void

When handle_get_ip_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due to have
a single statement.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)

Fix coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed extraneous spaces

Fix coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed extraneous parentheses

Fix coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed extraneous indentation

Fixed coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed unnecessary else branch

Fixed coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed brace style

Fixed coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed newlines style

Fixed coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed block comments style

Fixed coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: fixed typo

Fixed typo

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: drivers: rtl8188eu: move constants to the right in comparisons

Fixed coding style issue

Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: act2000: remove extra space

It is not kernel coding style to give an extra space after a cast.
We get warned about it by checkpatch.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: act2000: remove blank line after brace

checkpatch complains about an extra blank line after an opening brace.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: act2000: do not assign in if

It is not the kernel coding style to assign values to some variable in
if statement. Split them up into different statements.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: act2000: fix use of return

checkpatch warns that return is not a function and as such the brace
after it is not required.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: Fixed alignment to match open parenthesis

Fixed alignment to match open parenthesis.

Signed-off-by: Parth Sane <laerdevstudios@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: fsl-mc: Add second maintainer

Add Stuart Yoder as additional maintainer of fsl-mc bus driver.

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: bus: Drop warning

When updating the irq_chip and msi_domain_ops, the code checkes for
already present functions.
When more then one ITS controller are present in the system,
irq_chip and msi_domain_ops got already set and a warning is invoked.

This patch deletes the warning, as the funtions are just already set to
the needed callbacks.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: return -EINVAL for all fsl_mc_portal_allocate() failures

There are some error paths that allow for a NULL new_mc_io and err = 0
return code. Return -EINVAL instead.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: add dpmcp version check

The dpmcp driver supports dpmcp version 3.0 and above.
This patch adds the code to check the version.

Signed-off-by: Itai Katz <itai.katz@nxp.com>
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
 drivers/staging/fsl-mc/bus/dpmcp-cmd.h    |    6 +++---
 drivers/staging/fsl-mc/bus/mc-allocator.c |   11 +++++++++++
 2 files changed, 14 insertions(+), 3 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: add quirk handling for dpseci objects < 4.0

dpseci objects < 4.0 are not coherent-- in spite of the fact
that the MC reports them to be coherent in certain versions.
Add a special case to set the no shareability flag for dpseci
objects < 4.0.

Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
(Stuart: reworded commit message, updated comment in patch)
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: add dprc version check

The dprc driver supports dprc version 5.0 and above.
This patch adds the code to check the version.

Signed-off-by: Itai Katz <itai.katz@nxp.com>
(Stuart: resolved merge conflicts, split dpseci quirk into separate patch)
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: get version of root dprc from MC hardware

The root dprc is discovered as a platform device in the device tree.  The
version of that dprc was previously set using hardcoded values from the API
header in the kernel).  This patch removes the use of the hardcoded version
numbers and instead reads the actual dprc version from the hardware.

Signed-off-by: Itai Katz <itai.katz@nxp.com>
(Stuart: resolved merge conflict, updated commit subject/log)
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: set cacheable flag for added devices if applicable

Some DPAA2 devices have mmio regions that should be mapped as
cacheable by drivers.  Set IORESOURCE_CACHEABLE in the region's
flags if applicable.

Signed-off-by: Itai Katz <itai.katz@nxp.com>
[Stuart: update subject and commit message]
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: set up coherent dma ops for added devices

Unless discovered devices have the no shareability flag set,
set up coherent dma ops for them.

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: don't use object versions to make binding decisions

Up until now if the object version expected by a driver (in the API header
file) did not match the actual object version in the MC hardware the bus
driver refused to bind the object to the driver or printed out WARN_ON
dumps.

This patch removes those checks, and the responsibility of object version
checking should now be done in the object drivers themselves.  If the actual
version discovered is not supported, the driver's probe function should fail.
Drivers should use version checks to support new features and provide
backwards compatibility if at all possible.

This patch also removes the checks that caused bus driver probing to fail
if the overall MC version discovered did not match the firmware version
from the API header...this was too strict.  The overall MC version is
informational like a release number, and continues to be printed in the
boot log.

Signed-off-by: Itai Katz <itai.katz@nxp.com>
(Stuart: reworded commit log)
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: update dprc binary interface to v5.1

The meaning of the "status" parameter in dprc_get_irq_status
has changed, and this patch updates the flib and caller
of the API.

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: update dpbp binary interface to v2.2

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: update dpmcp binary interface to v3.0

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: DPAA2 overview readme update

incorporated feedback from review comments, other misc cleanup/tweaks

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: TODO updates

remove 3 of the remaining TODO items:

   -multiple root fsl-mc buses-- done in patch series starting with
    commit 14f928054a05 ("staging: fsl-mc: abstract test for existence
    of fsl-mc bus")

   -interrupt support-- done in patch series starting with
    commit 9b1b282ccd81 ("irqdomain: Added domain bus token
    DOMAIN_BUS_FSL_MC_MSI")

   -MC command serialization-- done in commit 63f2be5c3b358 ("staging:
    fsl-mc: Added serialization to mc_send_command()")

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: German Rivera <german.rivera@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: board: line over 80 characters

This patch fixes the checkpatch.pl warning:

WARNING: line over 80 characters
+   .domain         = "/system-controller@e6180000/pm-domains/c5/a4lc@1"

Signed-off-by: Nikita Eshkeev <kastolom@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Add space to align functions

Issue found by checkpatch.pl
CHECK: Alignment should match open parenthesis

Signed-off-by: han tai <hantai1248@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: fix missing blank line

fix checkpatch.pl warning about 'Missing a blank line after
declarations'

Signed-off-by: Clifton Barnes <clifton.a.barnes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: fix bare use of 'unsigned'

fix checkpatch.pl warning about 'Prefer 'unsigned int' to bare use of
'unsigned''

Signed-off-by: Clifton Barnes <clifton.a.barnes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: alignment to match open paranthesis

Fixes CHECK: Alignment should match open parenthesis

Signed-off-by: Manav Batra <batmanav10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: ensure braces on all arms of if stmt

Added braces on if arm of if statement where else arm already needs
braces as suggested for clarity in Documentation/CodingStyle (several)

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lowmemorykiller: remove bogus NULL check

The NULL checking here doesn't make sense, so it causes a static checker
warning.  It turns out that p->mm can't be NULL so the inconsistency is
harmless and we should just remove the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: get rid of mutex_locked variables

Remove mutex_locked variables which are used to determine whether mutex is
locked, instead add another label to unlock mutex on premature exits due to
an error.

This patch also addresses the folowing warnings reported by coccinelle:

drivers/staging/fsl-mc/bus/mc-allocator.c:237:1-7: preceding lock on line 204
drivers/staging/fsl-mc/bus/mc-allocator.c:89:1-7: preceding lock on line 57
drivers/staging/fsl-mc/bus/mc-allocator.c:157:1-7: preceding lock on line 124

Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix crash due to pointers being "confusing"

There's no net_device stashed in skb->cb, there's a net_device * there.

To make it *really* clear, also change the write of the dev pointer
into skb->cb from a memcpy() to an assignment.

Fixes: 3fe563249374 ("staging: rtl8192u: r8192U_core.c: Cleaning up ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: rewrite NULL comparison for pointers

When testing pointers, it is not necessary to explicitly compare to
NULL. Rewrite if condition as (!ptr) or (ptr) as suggested in
Documentation/CodingStyle

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: add blank line after declarations

Add a blank line after function/struct/union/enum declarations for
readability, as suggested in Documentation/CodingStyle

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove blank lines after braces (opening)

Remove unneeded blank lines appearing after opening braces as suggested
by checkpatch.pl

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove blank lines before braces (closing)

Remove unneeded blank lines occuring before closing braces

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: use container_of() instead of LIST_CONTAINOR()

This patch drops the local definition of LIST_CONTAINOR(), and uses
container_of() instead of it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: align parentheses

Aligned parentheses to conform to the coding style.

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: add operator white space

Added white space between operators and operands. Because this sometimes
maxed out the column width, some expressions were broken up into multiple
lines, and comments were moved appropriately.

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: use tty_alloc_driver instead of kcalloc

The tty_alloc_driver() can allocate memory for ttys and termios.
And also allocated memory will be released easily with
put_tty_driver() call.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant NULL check in

There were already checking NULL about channel_t / un_t
before calling dgnc_maxcps_room().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: return -ENOMEM when kzalloc failed

The kzalloc can be failed when memory is not enough
to allocate. When kzalloc failed, it need to return
error code with ENOMEM

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove blank line

fix checkpatch.pl warning:
Blank lines aren't necessary after an open brace '{'

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove parenthesis around the CONST |

remove parenthesis around the CONST | CONST.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dgnc: Added spaces around a bitwise OR.

Coding rules request placing bitwise OR operators between empty spaces
for better readibility. This patch applies this format to a line in
dgnc_tty.c file.

Signed-off-by: Juanma de Hoyos <juanmahv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: memory allocated inside mkimage() is not freed if subsequent calls fails.

This patch frees memory allocated inside mkimage() in case mkimage()
or any other subsequent calls inside prism2_fwapply() from prism2fw.c
file fails. To fix this I introduces goto labels where the free
operation is done in case some operations fails. After the introduction
of goto labels has been done, in order to use the same return path,
"return x" instuctions were replaced with "goto" instuctions.

Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rewrite NULL comparison

It is not necessary to compare explicitly to NULL. Rewrite if condition
as (!dev) or (dev) as suggested in Documentation/CodingStyle

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: dummy: fix dereference of ERR_PTR

ion_device_create() can fail and if it fails then it returns the error
value in ERR_PTR.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: modify memory allocation style in ion_chunk_heap.c

Modify memory allocation style in order to silence a checkpatch.pl
warning.

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: modify memory allocation style in ion_test.c

Modifies the memory allocation style ion_test.c in order to remove a
checkpatch.pl warning

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: make locally used functions static

Functions ion_handle_put and ion_handle_get_by_id are only used locally
in ion.c, so they should be made static as they used to be before
9590232b ("staging/android/ion : fix a race condition in the ion driver").

Signed-off-by: Markus Böhme <markus.boehme@mailbox.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: add Sync File doc

Add sync_file documentation on dma-buf-sync_file.txt
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: include sync_file into DocBook

Add entry in device-drivers.tmpl for sync_file documentation.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sync_file: de-stage sync_file

sync_file is useful to connect one or more fences to the file. The file is
used by userspace to track fences between drivers that share DMA bufs.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sync_file: de-stage sync_file headers

Move sync_file headers file to include/ dir.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: style fix: alignment to match the open parenthesis

Fix checks reported by checkpatch.pl.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: improve documentation for sync_file

num_fences was missing a colon mark and sync_file_create() now have
better description.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>