drm: Fix up markup fumble

It's & for struct references, not #.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462369327-26659-1-git-send-email-daniel.vetter@ffwll.ch

drm/fb_helper: Fix a few typos

s/modest/modeset/
s/aftert/after/

Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462375734-8213-3-git-send-email-cpaul@redhat.com

drm/i915/mst: use reference counted connectors. (v3)

Don't just free the connector when we get the destroy callback.

Drop a reference to it, and set it's mst_port to NULL so
no more mst work is done on it.

v2: core mst accepts NULLs fine. Cleanup EDID code properly.
v3: drop the extra reference we were taking.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/atomic: use connector references (v3)

Take a reference when setting a crtc on a connecter,
also take one when duplicating if a crtc is set,
and drop one on destroy if a crtc is set.

v2: take Daniel Stone's advice and simplify the
ref/unref dances, also take care of NULL as connector
to state reset.

v3: remove need for connector NULL check.

Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/crtc: take references to connectors used in a modeset. (v2)

This just takes a reference on the connector when we set a mode
in the non-atomic paths.

v2: Follow Daniel Stone's suggestions on when to take/drop
references.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/fb_helper: add connector reference counting. (v2)

This takes a reference count when fbdev adds the connector,
and drops it when it removes the connector.

It also drops the now unneeded code to find connectors
and remove the from the modeset as they are reference counted.

v2: drop references when removing all connectors at end.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/modes: add connector reference counting. (v2)

This uses the previous changes to add reference counts
to drm connector objects.

v2: move fbdev changes to their own patch.
add some kerneldoc

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/fb: fix missing /** in kerneldoc comment.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel into drm-next

Ofc I promise just a few leftovers for drm-misc and somehow it's the
biggest pull. But really mostly trivial stuff:
- MAINTAINERS updates from Emil
- rename async to nonblock in atomic_commit to avoid the confusion between
  nonblocking ioctl and async flip (= not vblank synced), from Maarten.
  Needs to be regened with newer drivers, but probably only after -rc1 to
  catch them all.
- actually lockless gem_object_free, plus acked driver conversion patches.
  All the trickier prep stuff already is in drm-next.
- Noralf's nice work for generic defio support in our fbdev emulation.
  Keeps the udl hack, and qxl is tested by Gerd.

* tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel: (47 commits)
  drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked
  drm/etnaviv: Use lockless gem BO free callback
  drm/imx: Use lockless gem BO free callback
  drm/radeon: Use lockless gem BO free callback
  drm/amdgpu: Use lockless gem BO free callback
  drm/gem: support BO freeing without dev->struct_mutex
  MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver.
  MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers
  MAINTAINERS: Add a few DRM drivers by Dave Airlie
  MAINTAINERS: List the correct git repo for the Renesas DRM drivers
  MAINTAINERS: Update the files list for the Renesas DRM drivers
  MAINTAINERS: Update the files list for the Armada DRM driver
  MAINTAINERS: Update the files list for the Rockchip DRM driver
  MAINTAINERS: Update the files list for the Exynos DRM driver
  MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver
  MAINTAINERS: Add maintainer entry for the MSM DRM driver
  MAINTAINERS: Add maintainer entry for the Nouveau DRM driver
  MAINTAINERS: Update the files list for the Etnaviv DRM driver
  MAINTAINERS: Remove unneded wildcard for the i915 DRM driver
  drm/atomic: Add WARN_ON when state->acquire_ctx is not set.
  ...

drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked

Embarrassingly while fixing up the old paths for i915 I managed to
misplace a locking check for the new _unlocked paths. That's what I
get for not retesting on radeon.

Fixes: 9f0ba539d13a ("drm/gem: support BO freeing without dev->struct_mutex")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/etnaviv: Use lockless gem BO free callback

No dev->struct_mutex anywhere to be seen.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-17-git-send-email-daniel.vetter@ffwll.ch

drm/imx: Use lockless gem BO free callback

No dev->struct_mutex anywhere to be seen.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-20-git-send-email-daniel.vetter@ffwll.ch

drm/radeon: Use lockless gem BO free callback

No dev->struct_mutex anywhere to be seen.

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-24-git-send-email-daniel.vetter@ffwll.ch

drm/amdgpu: Use lockless gem BO free callback

No dev->struct_mutex anywhere to be seen.

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-11-git-send-email-daniel.vetter@ffwll.ch

drm/gem: support BO freeing without dev->struct_mutex

Finally all the core gem and a lot of drivers are entirely free of
dev->struct_mutex depencies, and we can start to have an entirely
lockless unref path.

To make sure that no one who touches the core code accidentally breaks
existing drivers which still require dev->struct_mutex I've made the
might_lock check unconditional.

While at it de-inline the ref/unref functions, they've become a bit
too big.

v2: Make it not leak like a sieve.

v3: Review from Lucas:
- drop != NULL in pointer checks.
- fixup copypasted kerneldoc to actually match the functions.

v4:
Add __drm_gem_object_unreference as a fastpath helper for drivers who
abolished dev->struct_mutex, requested by Chris.

v5: Fix silly mistake in drm_gem_object_unreference_unlocked caught by
intel-gfx CI - I checked for gem_free_object instead of
gem_free_object_unlocked ...

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462178451-1765-1-git-send-email-daniel.vetter@ffwll.ch

Merge tag 'drm-hisilicon-next-2016-04-29' of github.com:xin3liang/linux into drm-next

drm-hisilicon-next for 4.7

Add new hisilicon kirin drm driver:
- Add maintainer for hisilicon DRM driver
- Add support for external bridge
- Add designware dsi host driver
- Add designware dsi encoder driver
- Add cma fbdev and hotplug
- Add vblank driver for ADE
- Add plane driver for ADE
- Add crtc driver for ADE
- Add hisilicon kirin drm master driver
- Add device tree binding for hi6220 display subsystem

* tag 'drm-hisilicon-next-2016-04-29' of github.com:xin3liang/linux:
  MAINTAINERS: Add maintainer for hisilicon DRM driver
  drm/hisilicon: Add support for external bridge
  drm/hisilicon: Add designware dsi host driver
  drm/hisilicon: Add designware dsi encoder driver
  drm/hisilicon: Add cma fbdev and hotplug
  drm/hisilicon: Add vblank driver for ADE
  drm/hisilicon: Add plane driver for ADE
  drm/hisilicon: Add crtc driver for ADE
  drm/hisilicon: Add hisilicon kirin drm master driver
  drm/hisilicon: Add device tree binding for hi6220 display subsystem

Merge tag 'drm-amdkfd-next-2016-05-04' of git://people.freedesktop.org/~gabbayo/linux into drm-next

Here are a few amdkfd patches for 4.7, all of them fixes according to
the Coccinelle tool.

* tag 'drm-amdkfd-next-2016-05-04' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: Trim unnescessary intermediate err var in kfd_chardev.c
  amdkfd: Trim off unnescessary semicolon from kfd_packet_manager.c
  amdkfd: Use the canonical form in branch predicates

Merge branch 'drm-rockchip-next-fixes-05-03' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

Here are some little fixes for rockchip drm, looks good for me, and seems there is no doubt on them, So I'd like you can land them.

* 'drm-rockchip-next-fixes-05-03' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: Initialize vskiplines to zero
  drm/rockchip: vop: fix iommu crash with async atomic
  drm/rockchip: support non-iommu buffer path
  drm/rockchip: get rid of rockchip_drm_crtc_mode_config
  drm/rockchip: inno_hdmi: fix an error code
  drm/rockchip: don't leak iommu mapping
  drm/rockchip: remove redundant statement

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
 - Support for pipeline clock between KMS drivers.
   . Exynos SoC is required to control clocks across KMS drivers
     according to Exynos SoC version. So this patch refactos
     some relevant codes and provides generic solution for it.
 - Add Exynos5433 SoC support to HDMI parts - HDMI and DECON-TV.
 - Add HW trigger mode support to CRTC drivers.
   . In case of using i80 Panel, some Exynos SoC supports HW trigger
     mode so this patch makes trigger mode - HW or SW trigger - to be
     set according to SoC version properly.
 - And some cleanups and regression fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (39 commits)
  drm/exynos: clean up register definions for fimd and decon
  drm/exynos: decon: clean up interface type
  drm/exynos: fimd: add HW trigger support
  drm/exynos: clean up wait_for_vblank
  drm/exynos: mixer: use generic of_device_get_match_data helper
  drm/exynos: mixer: remove support for non-dt platforms
  drm/exynos: hdmi: use generic of_device_get_match_data helper
  drm/exynos: rotator: use generic of_device_get_match_data helper
  drm/exynos: fimd: use generic of_device_get_match_data helper
  drm/exynos: dsi: use generic of_device_get_match_data helper
  drm/exynos: exynos5433_decon: use generic of_device_get_match_data helper
  drm/exynos: convert clock_enable crtc callback to pipeline clock
  drm/exynos/mixer: enable HDMI-PHY before configuring MIXER
  drm/exynos/decon5433: enable HDMI-PHY before configuring DECON
  drm/exynos: add support for pipeline clock to the framework
  drm/exynos: add helper to get crtc from pipe
  drm/exynos/decon5433: do not protect window in plane disable
  drm/exynos/decon5433: reset decon on start
  drm/exynos/decon5433: fix DECON standalone update
  drm/exynos/hdmi: remove registry dump
  ...

Merge tag 'drm-vc4-next-2016-05-02' of https://github.com/anholt/linux into drm-next

This pull request brings in DPI panel support, gamma ramp support, and
render nodes for vc4.

* tag 'drm-vc4-next-2016-05-02' of https://github.com/anholt/linux:
  drm/vc4: Add missing render node support
  drm/vc4: Add support for gamma ramps.
  drm/vc4: Fix NULL deref in HDMI init error path
  drm/vc4: Add DPI driver
  drm: Add an encoder and connector type enum for DPI.

Merge tag 'topic/drm-misc-2016-04-29' of git://anongit.freedesktop.org/drm-intel into drm-next

- prep work for struct_mutex-less gem_free_object
- more invasive/tricky mst fixes from Lyude for broken hw. I discussed
  this with Ville/Jani and we all agreed more soaking in -next would be
  real good this late in the -rc cycle. They're cc: stable too to make
  sure they're not getting lost. Feel free to cherry-pick those four if
  you disagree.
- few small things all over

* tag 'topic/drm-misc-2016-04-29' of git://anongit.freedesktop.org/drm-intel:
  drm/atomic: Add missing drm_crtc_internal.h include
  drm/dp: Allow signals to interrupt drm_aux-dev reads/writes
  drm: Quiet down drm_mode_getresources
  drm: Quiet down drm_mode_getconnector
  drm: Protect dev->filelist with its own mutex
  drm: Make drm_vm_open/close_locked private to drm_vm.c
  drm: Hide master MAP cleanup in drm_bufs.c
  drm: Forbid legacy MAP functions for DRIVER_MODESET
  drm: Push struct_mutex into ->master_destroy
  drm: Move drm_getmap into drm_bufs.c and give it a legacy prefix
  drm: Put legacy lastclose work into drm_legacy_dev_reinit
  drm: Give drm_agp_clear drm_legacy_ prefix
  drm/sysfs: Annote lockless show functions with READ_ONCE
  MAINTAINERS: Update the files list for the GMA500 DRM driver
  drm: rcar-du: Fix compilation warning
  drm/i915: Get rid of intel_dp_dpcd_read_wake()
  drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()
  drm/dp_helper: Retry aux transactions on all errors
  drm/dp_helper: Always wait before retrying native aux transactions

Merge tag 'drm-intel-next-2016-04-25' of git://anongit.freedesktop.org/drm-intel into drm-next

- more userptr cornercase fixes from Chris
- clean up and tune forcewake handling (Tvrtko)
- more underrun fixes from Ville, mostly for ilk to appeas CI
- fix unclaimed register warnings on vlv/chv and enable the debug code to catch
  them by default (Ville)
- skl gpu hang fixes for gt3/4 (Mika Kuoppala)
- edram improvements for gen9+ (Mika again)
- clean up gpu reset corner cases (Chris)
- fix ctx/ring machine deaths on snb/ilk (Chris)
- MOCS programming for all engines (Peter Antoine)
- robustify/clean up vlv/chv irq handler (Ville)
- split gen8+ irq handlers into ack/handle phase (Ville)
- tons of bxt rpm fixes (mostly around firmware interactions), from Imre
- hook up panel fitting for dsi panels (Ville)
- more runtime PM fixes all over from Imre
- shrinker polish (Chris)
- more guc fixes from Alex Dai and Dave Gordon
- tons of bugfixes and small polish all over (but with a big focus on bxt)

* tag 'drm-intel-next-2016-04-25' of git://anongit.freedesktop.org/drm-intel: (142 commits)
  drm/i915: Update DRIVER_DATE to 20160425
  drm/i915/bxt: Explicitly clear the Turbo control register
  drm/i915: Correct the i915_frequency_info debugfs output
  drm/i915: Macros to convert PM time interval values to microseconds
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915/bxt: Force reprogramming a PHY with invalid HW state
  drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already enabled
  drm/i915/bxt: Use PHY0 GRC value for HW state verification
  drm/i915: use dev_priv directly in gen8_ppgtt_notify_vgt
  drm/i915/bxt: Enable DC5 during runtime resume
  drm/i915/bxt: Sanitize DC state tracking during system resume
  drm/i915/bxt: Don't uninit/init display core twice during system suspend/resume
  drm/i915: Inline intel_suspend_complete
  drm/i915/kbl: Don't WARN for expected secondary MISC IO power well request
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915: check for ERR_PTR from i915_gem_object_pin_map()
  drm/i915/guc: local optimisations and updating comments
  drm/i915/guc: drop cached copy of 'wq_head'
  drm/i915/guc: keep GuC doorbell & process descriptor mapped in kernel
  ...

MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver.

Signed-off-by: Eric Anholt <eric@anholt.net>
[Emil Velikov: drop wildcard, add UAPI and Documentation files]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462283659-1314-1-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers

Pretty much all of these hasn't seen any action singe 2008 at the very
least. Barring the occasional buildfix and DRM-wide refactoring of
course.

Note: some distributions have stopped shipping their userspace
counterparts for a while. Although some still do.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

MAINTAINERS: Add a few DRM drivers by Dave Airlie

Almost exclusively done by Dave Airlie.

Explicitly list him as a maintainer and classify them as "Odd Fixes" as I
doubt he's got much time for them these days.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-14-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: List the correct git repo for the Renesas DRM drivers

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-10-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Update the files list for the Renesas DRM drivers

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-9-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Update the files list for the Armada DRM driver

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-8-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Update the files list for the Rockchip DRM driver

The location listed is a folder - swap the wildcard with '/'

Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-6-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Update the files list for the Exynos DRM driver

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-4-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver

Thomas is one of the original authors of the driver, with recent
contributions from Sinclair and Brian.

v2: Add Sinclair as maintainer. Add Sinclair+Thomas's tree, use
Supported as status.

Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Brian Paul <brianp@vmware.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462230939-26389-1-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Add maintainer entry for the MSM DRM driver

Rob and Archit are the main developers behind the driver.

v2: Removing Archit for now, correcting the status and adding
linux-arm-msm@ mailing list.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462230888-26319-1-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Add maintainer entry for the Nouveau DRM driver

Ben has been the maintainer of the driver even before it got included in
the kernel.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-11-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Update the files list for the Etnaviv DRM driver

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@arm.linux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-7-git-send-email-emil.l.velikov@gmail.com

MAINTAINERS: Remove unneded wildcard for the i915 DRM driver

There is no other file but the UAPI header, thus we can drop the
wildcard.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-3-git-send-email-emil.l.velikov@gmail.com

drm/atomic: Add WARN_ON when state->acquire_ctx is not set.

When I was writing an atomic wrapper for rmfb, I ran into the
following backtrace from lockdep:

=============================================
[ INFO: possible recursive locking detected ]
4.5.0-patser+ #4696 Tainted: G     U
---------------------------------------------
kworker/2:2/2608 is trying to acquire lock:
 (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffffc00c9ddc>] drm_modeset_lock+0x7c/0x120 [drm]

but task is already holding lock:
 (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffffc00c98cd>] modeset_backoff+0x8d/0x220 [drm]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(crtc_ww_class_mutex);
  lock(crtc_ww_class_mutex);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

4 locks held by kworker/2:2/2608:
 #0:  ("events"){.+.+.+}, at: [<ffffffff810a5eea>] process_one_work+0x15a/0x6c0
 #1:  ((&arg.work)){+.+.+.}, at: [<ffffffff810a5eea>] process_one_work+0x15a/0x6c0
 #2:  (crtc_ww_class_acquire){+.+.+.}, at: [<ffffffffc004532a>] drm_atomic_helper_remove_fb+0x4a/0x1d0 [drm_kms_helper]
 #3:  (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffffc00c98cd>] modeset_backoff+0x8d/0x220 [drm]

While lockdep probably catches this bug when it happens, it's better
to explicitly warn when state->acquire_ctx is not set.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462266751-29123-1-git-send-email-maarten.lankhorst@linux.intel.com

drm/fsl-dcu: add COMMON_CLK dependency

The fsl dcu now uses the clk-provider interfaces, which are not available
when CONFIG_COMMON_CLK is disabled:

drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c: In function 'fsl_dcu_drm_probe':
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c:362:20: error: implicit declaration of function '__clk_get_name' [-Werror=implicit-function-declaration]
  pix_clk_in_name = __clk_get_name(pix_clk_in);

This adds a Kconfig dependency to prevent the driver from being enabled
in this case.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel clock divider")
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462186839-2224021-1-git-send-email-arnd@arndb.de

drm/rockchip: vop: Initialize vskiplines to zero

There is a path that use vskiplines with non-initialize.
That would cause vop abnormal behavior.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/rockchip: vop: fix iommu crash with async atomic

After async atomic_commit callback, drm_atomic_clean_old_fb will
clean all old fb, but because async, the old fb may be also on
the vop hardware, dma will access the old fb buffer, clean old
fb will cause iommu page fault.

Reference the fb and unreference it when the fb actuall swap out
from vop hardware.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/rockchip: support non-iommu buffer path

Some rockchip vop not support iommu, need use non-iommu
buffer for it. And if we get iommu issues, we can compare
the issues with non-iommu path, that would help the debug.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/rockchip: get rid of rockchip_drm_crtc_mode_config

We need to take care of the vop status when use
rockchip_drm_crtc_mode_config, if vop is disabled,
the function would failed, that is terrible.

Save output_type and output_mode into rockchip_crtc_state,
it's nice to make them into atomic.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: John Keeping <john@metanate.com>

drm/rockchip: inno_hdmi: fix an error code

We were accidentally returning PTR_ERR(NULL) which means success when we
wanted to return a negative error code.

Fixes: 412d4ae6b7a5 ('drm/rockchip: hdmi: add Innosilicon HDMI support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yakir Yang <ykk@rock-chips.com>

drm/rockchip: don't leak iommu mapping

arm_iommu_attach_device() takes its own reference to the mapping we give
it.  Since we do not keep a reference to the mapping ourselves, we must
release it before returning.

Also fix the error path, which fails to release the mapping if it has
called arm_iommu_detach_device() since that clears archdata.mapping.

Signed-off-by: John Keeping <john@metanate.com>

drm/rockchip: remove redundant statement

The call to arm_iommu_detach_device() on the previous line sets
dev->archdata.mapping to NULL so this call is always a no-op.

Signed-off-by: John Keeping <john@metanate.com>

drm/vc4: Add missing render node support

There shouldn't be any other driver support necessary, since none of
the driver-specific ioctls ever required auth, and none of them deal
with modesetting.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/vc4: Add support for gamma ramps.

We could possibly save a bit of power by not requesting gamma
conversion when the ramp happens to be 1:1, but at least if all the
CRTCs are off the SRAM will be disabled.

This should fix brightness sliders in a lot of fullscreen games.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/docs: Move "scaling mode" property.

The "scaling mode" property has been moved to the DRM->Generic.
It has also had a list of supported drivers added to it.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462216381-10160-1-git-send-email-robert.foss@collabora.com

drm/tilcdc: use drm_crtc_send_vblank_event()

Replace the legacy drm_send_vblank_event() with the new helper function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-11-git-send-email-gustavo@padovan.org

drm/shmobile: use drm_crtc_send_vblank_event()

Replace the legacy drm_send_vblank_event() with the new helper function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-10-git-send-email-gustavo@padovan.org

drm/rcar-du: use drm_crtc_send_vblank_event()

Replace the legacy drm_send_vblank_event() with the new helper function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-9-git-send-email-gustavo@padovan.org

drm/msm: use drm_crtc_send_vblank_event()

Replace the legacy drm_send_vblank_event() with the new helper function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-5-git-send-email-gustavo@padovan.org

drm/radeon: use drm_crtc_send_vblank_event()

Replace the legacy drm_send_vblank_event() with the new helper function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-8-git-send-email-gustavo@padovan.org

drm/amdgpu: use drm_crtc_send_vblank_event()

Replace the legacy drm_send_vblank_event() with the new helper function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-1-git-send-email-gustavo@padovan.org

drm/i915: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-13-git-send-email-maarten.lankhorst@linux.intel.com

drm/vc4: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-12-git-send-email-maarten.lankhorst@linux.intel.com

drm/rockchip: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-11-git-send-email-maarten.lankhorst@linux.intel.com

drm/tegra: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: "Terje Bergström" <tbergstrom@nvidia.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-10-git-send-email-maarten.lankhorst@linux.intel.com

drm/sti: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-9-git-send-email-maarten.lankhorst@linux.intel.com

drm/rcar-du: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-8-git-send-email-maarten.lankhorst@linux.intel.com

drm/omapdrm: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-7-git-send-email-maarten.lankhorst@linux.intel.com

drm/msm: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Also comments seem to be a bit outdated, as it looks like
nonblocking commit is supported by msm.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-6-git-send-email-maarten.lankhorst@linux.intel.com

drm/exynos: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-5-git-send-email-maarten.lankhorst@linux.intel.com

drm/arm/hdlcd: Rename async to nonblock.

The async name is deprecated and should be changed to nonblocking.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-4-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Rename drm_atomic_async_commit to nonblocking.

Another step in renaming async to nonblocking for atomic commit.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-3-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Rename async parameter to nonblocking.

This is the first step of renaming async commit to nonblocking commit.
The flag passed by userspace is NONBLOCKING, and async has a different
meaning for page flips, where it means as soon as possible.

Fixing up comments in drm core is done manually, to make sure I didn't
miss anything.

For drivers, the following cocci script is used to rename bool async to bool
nonblock:
@@
identifier I =~ "^async";
identifier func;
@@
func(..., bool
- I
+ nonblock
, ...)
{
<...
- I
+ nonblock
...>
}
@@
identifier func;
type T;
identifier I =~ "^async";
@@
T func(..., bool
- I
+ nonblock
, ...);

Thanks to Tvrtko Ursulin for the cocci script.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-2-git-send-email-maarten.lankhorst@linux.intel.com

drm/udl: Use drm_fb_helper deferred_io support

Use the fbdev deferred io support in drm_fb_helper.
The (struct fb_ops *)->fb_{fillrect,copyarea,imageblit} functions will
now schedule a worker instead of being flushed directly like it was
previously (recorded when in atomic).

This patch has only been compile tested.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-8-git-send-email-noralf@tronnes.org

drm/qxl: Use drm_fb_helper deferred_io support

Use the fbdev deferred io support in drm_fb_helper which mirrors the
one qxl has had.
This patch has only been compile tested.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-7-git-send-email-noralf@tronnes.org

drm/fb-cma-helper: Add fb_deferred_io support

This adds fbdev deferred io support if CONFIG_FB_DEFERRED_IO is enabled.
The driver has to provide a (struct drm_framebuffer_funcs *)->dirty()
callback to get notification of fbdev framebuffer changes.
If the dirty() hook is set, then fb_deferred_io is set up automatically
by the helper.

Two functions have been added so that the driver can provide a dirty()
function:
- drm_fbdev_cma_init_with_funcs()
  This makes it possible for the driver to provided a custom
  (struct drm_fb_helper_funcs *)->fb_probe() function.
- drm_fbdev_cma_create_with_funcs()
  This is used by the .fb_probe hook to set a driver provided
  (struct drm_framebuffer_funcs *)->dirty() function.

Cc: laurent.pinchart@ideasonboard.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-6-git-send-email-noralf@tronnes.org

fbdev: fb_defio: Export fb_deferred_io_mmap

Export fb_deferred_io_mmap so drivers can change vma->vm_page_prot.
When the framebuffer memory is allocated using dma_alloc_writecombine()
instead of vmalloc(), I get cache syncing problems on ARM.
This solves it:

static int drm_fbdev_cma_deferred_io_mmap(struct fb_info *info,
  struct vm_area_struct *vma)
{
fb_deferred_io_mmap(info, vma);
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);

return 0;
}

Could this have been done in the core?
Drivers that don't set (struct fb_ops *)->fb_mmap, gets a call to
fb_pgprotect() at the end of the default fb_mmap implementation
(drivers/video/fbdev/core/fbmem.c). This is an architecture specific
function that on many platforms uses pgprot_writecombine(), but not on
all. And looking at some of the fb_mmap implementations, some of them
sets vm_page_prot to nocache for instance, so I think the safest bet is
to do this in the driver and not in the fbdev core. And we can't call
fb_pgprotect() from fb_deferred_io_mmap() either because we don't have
access to the file pointer that powerpc needs.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-5-git-send-email-noralf@tronnes.org

drm/fb-helper: Add fb_deferred_io support

This adds deferred io support to drm_fb_helper.
The fbdev framebuffer changes are flushed using the callback
(struct drm_framebuffer *)->funcs->dirty() by a dedicated worker
ensuring that it always runs in process context.

For those wondering why we need to be able to handle atomic calling
contexts: Both panic paths and cursor code and fbcon blanking can run
from atomic. See

commit bcb39af4486be07e896fc374a2336bad3104ae0a
Author: Dave Airlie <airlied@redhat.com>
Date:   Thu Feb 7 11:19:15 2013 +1000

    drm/udl: make usage as a console safer

for where this was originally discovered.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Augment commit message with why we need to handle atomic
contexts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-4-git-send-email-noralf@tronnes.org

drm/qxl: Change drm_fb_helper_sys_*() calls to sys_*()

Now that drm_fb_helper gets deferred io support, the
drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule
a worker that will call the (struct drm_framebuffer *)->funcs->dirty()
function. This will break this driver so use the
sys_{fillrect,copyarea,imageblit} functions directly.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-3-git-send-email-noralf@tronnes.org

drm/udl: Change drm_fb_helper_sys_*() calls to sys_*()

Now that drm_fb_helper gets deferred io support, the
drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule
a worker that will call the (struct drm_framebuffer *)->funcs->dirty()
function. This will break this driver so use the
sys_{fillrect,copyarea,imageblit} functions directly.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-2-git-send-email-noralf@tronnes.org

amdkfd: Trim unnescessary intermediate err var in kfd_chardev.c

Found-By: Coccinelle
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

amdkfd: Trim off unnescessary semicolon from kfd_packet_manager.c

Found-By: Coccinelle
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

amdkfd: Use the canonical form in branch predicates

Found-By: Coccinelle
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/exynos: clean up register definions for fimd and decon

This patch removes suffixes from I80 relevant register definitions,
which are misleading.

This is based on top of below patch set,
     http://www.spinics.net/lists/dri-devel/msg104057.html

Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: decon: clean up interface type

This patch cleans up interface type relevant codes.

Trigger mode is determinded only by i80 mode, which isn't
related to Display types - HDMI or Display controller.
So this patch makes the trigger mode to be set only in case of
i80 mode - For DECON-TV, HW Trigger mode is flaged mandatorily
because HDMI Timing Generator generates VSYNC signal
which works as a hardware trigger.

Changelog v2.
- If interface type is HDMI then set out_type to I80.
- fix compile warning.

Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: add HW trigger support

This patch adds HW trigger support on i80 mode.

Until now, Exynos DRM only supported SW trigger which was set
SWTRGCMD bit of TRIGCON register by CPU to transfer scanout
buffer to Display bus device or panel.

With this patch, the transmission to Display bus device or
panel will be initiated by FIMD controller.

Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: clean up wait_for_vblank

This patch cleans up wait_for_vblank relevant codes.
wait_for_vblank callback isn't used anymore in Exynos drm driver
so it removes relevant codes. However, display controllers -
FIMD and DECON - still use this function driver internally
to ensure shadow registers to be updated, which resolves
page fault issue so keep it.

Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mixer: use generic of_device_get_match_data helper

Simplify code by replacing custom code by generic helper.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mixer: remove support for non-dt platforms

There are no non-devicetree based Exynos platforms in mainline, so there
no point keeping old platform driver data for them.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: hdmi: use generic of_device_get_match_data helper

Simplify code by replacing custom code by generic helper.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: rotator: use generic of_device_get_match_data helper

Simplify code by replacing custom code by generic helper.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: use generic of_device_get_match_data helper

Simplify code by replacing custom code by generic helper.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: dsi: use generic of_device_get_match_data helper

Simplify code by replacing custom code by generic helper and add missing
const qualifier to driver data structures.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: exynos5433_decon: use generic of_device_get_match_data helper

Simplify code by replacing custom code by generic helper.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: convert clock_enable crtc callback to pipeline clock

clock_enable callback is used only by FIMD->DP pipeline. Similar but more
universal functionality provides pipeline clock.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>

drm/exynos/mixer: enable HDMI-PHY before configuring MIXER

According to documentation HDMI-PHY must be on prior to MIXER configuration.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/decon5433: enable HDMI-PHY before configuring DECON

According to documentation and tests HDMI-PHY must be on prior
to MIXER configuration.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

drm/exynos: add support for pipeline clock to the framework

Components belonging to the same pipeline often requires
synchronized clocks. Such clocks are sometimes provided
by external clock controller, but they can be also provided by
pipeline components. In latter case there should be a way
to access them from another component belonging to the same pipeline.
This is the case of:
- DECON,FIMD -> HDMI and HDMI-PHY clock,
- FIMD -> DP and DP clock in FIMD.
The latter case has been solved by clock_enable callback
in exynos_drm_crtc_ops. This solutin will not work with
HDMI path as in this case clock is provided by encoder.

This patch provides more generic solution allowing to register
pipeline clock during initialization in exynos_drm_crtc structure.
This way the clock will be easily accessible from both components.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add helper to get crtc from pipe

The helper abstracts out conversion from pipeline
to crtc. Currently it is used in two places, but
there will be more uses in next patches.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/decon5433: do not protect window in plane disable

decon_atomic_begin and decon_atomic_flush protects all windows already.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/decon5433: reset decon on start

Resetting IP at starting ensures that DECON will be in known state
regardless of changes by bootloader.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/decon5433: fix DECON standalone update

DECON should be updated after un-protecting windows and after changing
output parameters, otherwise image is not displayed in case of HDMI path.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/hdmi: remove registry dump

HDMI registry dump unnecessary spoils console and is not very helpful.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/hdmi: add core reset code

To ensure HDMI-PHY reprogramming will not affect
HDMI the latter should be reset.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/hdmi: add PHY power off signal handling

HDMI-PHY power off bit defaults to 0 in older HDMI versions.
In case of Exynos5433 it defaults to 1. To make code
consistent across all versions this bit is always unset/set in
power on/off sequences.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/hdmi: fix PHY configuration sequence

Proper PHY configuration should be as follow:
1. set HDMI clock parents to OSCCLK.
2. reconfigure PHY.
3. set HDMI clock parents to PHY.
4. wait for PLL stabilization.

The patch fixes it and consolidates the code.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

dt-bindings: video: exynos5433-decon: add bindings for DECON-TV

DECON-TV(Display and Enhancement Controller for TV) is a variation
of DECON IP. Its main purpose is to produce video stream for HDMI IP.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

dt-bindings: video: add PCLK clock entry to exynos5433-decon

DECON IP requires this clock to access configuration registers.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>