V4L/DVB (4508): Fix an array overflow on bt866

The Coverity checker spotted the following two array overflows.
Registers 0xcc and 0xdc were cached on reg[] array, with only 128 elements,
instead of 256.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4507): Make tvp5150 an independent Kconfig item

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4506): TVP5150 routing logic were broken.

As pointed by The Coverity checker, commit
c7c0b34c27bbf0671807e902fbfea6270c8f138d broked input selection.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4504): Enable audio DMA restart on channel change even when cx88-alsa is compiled

cx88-alsa can be compiled in (in distro built kernels, for example), but
not used. In those cases, the audio DMA restart is needed for proper sound
on NICAM channels.
This patch enables the DMA restart even with ALSA, but the functions now
check if cx88-alsa is really active.

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4501): Add support for knc one dvb-s plus with 1894:0011

Apparently there are two types of knc1 dvb-s plus cards with different tuners
(as for the knc1 dvb-s ones). This patch adds support for those cards with
subsystem id 1894:0011.
Successfully tested by: Benjamin Weber <benny1990@gmail.com>

Signed-off-by: Christoph Pfister <christophpfister@gmail.com>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4500): Fix KNC1 DVBC support

This actually needs the same configuration as the other DVBC cards; simply
no one had managed to test before to find out.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4499): CONFIG_PM=n slim: drivers/media/video/*

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4498): Offset parameter permission were 0x666, instead of 0x664

Although not dangerous, it may allow a normal user with access to a machine
to untune a TV channel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4497): Reset USB part of DViCO Dual Digital during PCI driver attach

If the FX2 does not reset properly during reboot, it can present an
invalid USB device ID and fail to attach.  Prevent this situation
from occuring by resetting the USB part of the card when the PCI part
probes.
Also fix the GPIO configurations so that analog capture will not
inadvertantly reset the USB part.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4496): Tuning tweaks for ZL10353

More register setup which improves the ZL10353's tuning characteristics.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4495): Fix "no data from ZL10353 based USB tuner" problem

Force parallel transport stream output on the ZL10353 attached to a
bluebird device.
Addresses the problem where a frontend lock was observed, but no MPEG
transport data was received.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4493): [lnbp21] release callback fixed

lnbp21 module must use fe->ops.release_sec, not fe->ops.release.
The release function of the frontend driver was never called for cards
with lnbp21...

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4492): [dvb_attach] dvb_frontend_detach fix

dvb_frontend_detach() used invalid config option CONFIG_DVB_DETACH,
so dvb_frontend_detach() did not call symbol_put_addr().
Replaced CONFIG_DVB_DETACH by CONFIG_DVB_CORE_ATTACH.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4490): Whitespace cleanup

from whitespace cleaning script

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4488): Fix possible crash in Hauppauge eeprom reading

If an eeprom defined two tuners and they supported more than eight
standards combined (as opposed to each), it would overflow an array.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4485): Fix a warning on PPC64

drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c: In function 'set_standard':
drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c:33: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'v4l2_std_id'

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4484): Git-dvb: cadet build fix

drivers/media/radio/radio-cadet.c: In function 'cadet_do_ioctl':
drivers/media/radio/radio-cadet.c:362: warning: implicit declaration of function 'KERNEL_VERSION'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4481): Make the dibx000-common-module GPL

Forget to put the MODULE-define and thus to give the license. Now GPL

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4480): Remove null chars from dvb names

DVB null terminates its device names, which seems odd, and should be
unnecessary.
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4479): LNB voltage control was inverted for the benefit of geniatech cards on Kworld

1) It sets LNBDCPol differently based on the card type. Now it should
work properly for both the kworld and geniatech cards.
2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command
(the cx88-dvb level handles the actual voltage on/off, but it still
passes the ioctl down to the cx24123 level, which previously rejected
the OFF as invalid so the ioctl would report failure)

Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Yeasah Pell <yeasah@schwide.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4478): [av7110] Support Grundig DVB-T tuner for sub-system 13c2:0001

Some DVB-T cards with Grundig 29504-401 tuner use subsystem id 13c2:0001
(reported by Stuart Butterfield).

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4477): Improve hardware algorithm by setting the appropriate registers

Hardware algorithm needs to be configured to:
1) Increase timeout constants, to detect weaker signals;
2) do a wider zigzag search.
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4475): Fix most Compat32 stuff on V4L2

Tested on x64 with a bttv board. Most Get ioctls are fixed. The only
non-completely working one is VIDIOCGAUDIO. All other IOR ioctls give the
same results on x86_64 and i386 architectures.
Thanks to Alastair Poole <netstar@gatheringofgray.com> for part of this
patch and tests on ppc64.

Signed-off-by: Alastair Poole <netstar@gatheringofgray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4474): On some cases, depth were not returned.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4472): Remove debug-print from dib3000mc

Removed and commented a small debug function.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4470): MT2060: turn on the VGA

The VGA was not turned on after calling sleep. This lead to bad performance in difficult areas.

Signed-off-by: matthieu castet <castet.matthieu@free.fr>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4468): Another fix for attaching the DiB3000MC

Another stupid fix for attaching the DiB3000MC. == 0 instead of != 0.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB: DiB3000MC: set FE to NULL after being freed

DiB3000MC: set FE to NULL after being freed

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4464): FIX_ AverTV A800 trouble

A new revision of the Avermedia A800 does not reenumerate after download the firmware.

Signed-off-by: Klaus Frahm <frahm@irsamc.ups-tlse.fr>
Signed-off-by: Martin Habbecke <M.Habbecke@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4463): New firmware for Nova-t-usb2

Thomas Rokamp and others are reporting:
"I have now with success extracted a working firmware for the 93004 rev. C1A2."
This patch increments the firmware version to 2.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4465): Attach the dib3000mc correctly

Flynn Marquardt found out that there is problem with the new dib3000mc-driver
when using with the real dib3000mc. It resulted in a segfault.
Fixed two things: use the correct I2C address and do not attach a tuner, when
the demod was previously failing.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4461): Added missing dibx000-common code and headers

The first commit omitted the common-code and header-files.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB: Complete rewrite of the DiB3000mc-driver

A complete rewrite of the DiB3000MC/P driver has been done. It is now much more
easy to maintain and to get improvements inside.

Additionally the tuning time has been reduced and the usage of the driver is
much more understandable now.

Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4457): Remove dib3000-common-module

removing the dib3000-common-module. The common stuff is not common anymore - it will be only used by the 3000mb-driver.
A new 3000mc/p-driver will be added which will share common stuff with dib7000.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB: Update for MT2060 to use dvb_tuner_ops

new tuner api
minor fixes for tuning

Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4454): Corrected debugging output of the mt2060

When debugging was disabled at lot of empty lines where printed anyway.
Reported by Rolf Ahrenberg and Sergei Haller.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB: MT2060: Code cleanups, adding to new build-mechanism

Some minor code cleanups and added the MT2060 to new v4l-dvb-build-system, preliminarily under dvb/frontends.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4453): [PATCH] dibcom mod3000p + mt2060 -- remote control

+ Added support for the remote control shipped with the pen drive size
  DVB-T receiver
  [ID 10b8:0bc7 DiBcom DiBcom USB2.0 DVB-T reference design (MOD3000P)]

Signed-off-by: Sergei Haller <sergei@sergei-haller.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4451): MT2060: IF1 Offset from EEPROM, several updates

- AGC gain set to 3
- The tuning sequence has been changed to match the DibCom driver ( from I2C
  spy captures )
- For LITE-ON adapters : The IF1 frequency is now tuned according to the
  calibration values stored in EEPROM.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB: Added support for LeadTek DVB-T USB clone

Adding the USB ids for the LeadTek clone of the STK3000P-ref-design.

Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4446): Add support for the Artec T14

Adding the USB IDs to dibusb-mc.c for the Artec T14 USB Stick based on STK3000P reference design.
Thanks to Thomas Rabe testing.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB: Cleanups for mt2060-integration

- some coding style fixes for newly added mt2060
- moved agc-config from fixed values in dib3000mc to configurable ones
- whitespace clean-ups for usb-id-file

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB: Adding support for MT2060 and thus for some DVB-USB-devices based on it

- MT2060 tuner driver
- Added support for some USB DVB-T devices based on Dib3000P

Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4441): Flexcop/nxt200x attach fix

Address another case where the test in dvb-pll to see if a tuner's
PLL responds when attaching may fail.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4439): Whitespace cleanups for cx88-dvb and saa7134-dvb

This patch cleans up some whitespace problems after the dvb_attach changes
in cx88-dvb.c and saa7134-dvb.c, and converts some capitalized i2c address
constants to lowercase.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4438): Fix dvb_pll_attach for nxt2004-based cards

The test in dvb-pll to see if a tuner's PLL responds when attaching fails
on NXT2004 based boards before the firmware is loaded.
This patch allows us to avoid this test by not passing an I2C bus handle to
the dvb_pll_attach routine, just as Chris Pascoe has done for MT352 and
ZL10353 based boards when used in cx88-dvb.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4436): Dvb-pll support for MT352/ZL10353 based tuners.

Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's
expectation that the PLL is directly accessible.  On these boards, the
PLL is actually hidden behind the demodulator, and as such can only be
accessed via the demodulator's interface.  It was failing to communicate
with the PLL during an attach test and subsequently not connecting the
tuner ops.
By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility
check can be bypassed.  Do this for the affected boards.  Also fix a
possible NULL dereference at sleep time, which would otherwise be
exposed by this change.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4435): HW algo

Change this card to use HW ALGO tuning

Signed-off-by: Yeasah Pell <yeasah@schwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4434): Change BER config

Change the bit error counter configuration to be the actual BER.
Originally it was reporting UCB.

Signed-off-by: Yeasah Pell <yeasah@schwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4433): Soft decision threshold

Set the Soft decision threshold properly for the specified FEC

Signed-off-by: Yeasah Pell <yeasah@schwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4432): Fix Circular dependencies

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4428): Fix tda826x detection

The tda826x detection was (correctly) cleaned up earlier, but unfortunately
changing the number of received i2c messages from 2 -> 1 was missed. This
fixes it.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4424): Add missing dvb-pll Kconfig infrastructure

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4422): Improved comment for AR device and fix some typos

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4421): V4L2 Conversion: saa5246a, saa5249, vino, hexium_orion, hexium_gemini

Just a few adjustments were required on those drivers to be V4L2 compliant.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4417): Add support for PAL-Nc in cx24850.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4413): Konicawc - handle errors from input_register_device()

Compile-tested only (no hardware)

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4410): Cleanups and fixes for dsbr100

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4406): Convert radio-cadet to V4L2 API

This is a card with RDS capabilities.
RDS specifications didn't change from V4L1 to V4L2, so that part should be OK.
This patch changed the following stuff:
* The device can be opened multiple times. That's necessary because there are
at least a radio application and an RDS application (rdsd) that want to
open() the device.
* Added a poll() function. Every character device should have that, and rdsd
expects it as it uses select() on that file descriptor.
* Converted the ioctls to V4L2. MUTE is not implemented correctly as the
card doesn't seem to have a special bit for that. Probably there are a few
more ioctls that should at least return 0 or an error.
As I do not own such a card, I couldn't test anything. If there is anybody out
there who owns such an ancient card, please test and report.
I just checked that the code compiles.

Signed-off-by: Hans J. Koch <koch@hjk-az.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4405): Add missing KConfig I2C dependencies

This was breaking the build if i2c was not previously set

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4403): Use dprintk in tda826x.

As opposed to printk() at the moment, which will fill logs uselessly

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4402): Fix budget-ci to use dvb_frontend_detach()

I missed one call during the dvb_attach() development.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4401): Disable tda10086 debug by default.

Left on by accident.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4400): Tda826x: Remove 0-byte I2C write; put tuner_ops info in static struct

Remove the 0-byte write that precedes 2-byte read.
Move initialize the info field in the static tuner_ops definition, so
that it doesn't need to be done manually.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4398): Add support for Acorp TV134DS + FlyDVB-S cards.

Add support for Acorp TV134DS and FlyDVB-S cards (both based on
tda10086+tda826x)

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4397): Add tda10086 support for TT DVB-S-1401

Add the necessary code and makefile infrastructure

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4396): Add drivers for tda10086 + tda826x chips

TDA10086 is a new DVB-S demodulator
TDA826x is a DVB-S Silicon Tuner

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4394): Git-dvb: radio-sf16fmi build fix

drivers/media/radio/radio-sf16fmi.c: In function 'fmi_do_ioctl':
drivers/media/radio/radio-sf16fmi.c:147: warning: implicit declaration of function 'KERNEL_VERSION'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4392): Fix dst_ca attach

Move the call to dst_attach into the dst_attach function to eliminate
problems caused with dvb_attach.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4391): Refactor dvb_detach calls into a single dvb_frontend_detach function.

Remove buggy dvb_detach() macro and replace with unified
dvb_frontend_detach() call.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4389): Remove duplication _release() op.

I added a duplicate method during one of the previous dvb_attach attempts.
This removes the unnecessary duplication.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4388): Remove frontend selection from cx88/saa7134 drivers

Replaced with dvb_attach()

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4387): Add Kconfig infrastructure for dvb_attach

Allow it to be en/disabled
Disable it in < 2.6.17 due to symbol_xxx() bug

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4386): Convert DVB devices to use dvb_attach()

Only devices using > 1 frontend were ported; ones which did not are left
using static binding.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4385): Add dvb_attach() macro and supporting routines

Add dvb_attach() macro and supporting routines

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4384): Remove remaining static function calls

Rewrote _write() calls to use write() op.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4383): Convert SEC drivers to new frontend API

Convert SEC drivers to new frontend API

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4382): Dvb_attach modifications to dvb frontend structures

Add write() op
Add release_sec() op
Add change misc_priv->sec_priv data field
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4378): Ttpci/: remove unneeded #include <linux/byteorder/swabb.h>'s

Since av7110.c is the only file actually using something from this
header, there's no reson for other files to

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4377): Force horizontal resolution limits in the pvrusb2 driver

This change causes the pvrusb2 driver to limit horizontal resolution
to be only 720 if 24xxx device hardware is being used.  This is a
workaround for an unsolved problem in the driver where if the
resolution is set to something other than 720 the video quality will
be _seriously_ degraded.  It only happens on 24xxx devices (29xxx are
unaffected by the problem and unaffected by this change).  Once the
problem is finally solved, this small change can be removed.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4376): Make it possible for run-time calculation of control min/max in pvrusb2

The internal control implementation in the pvrusb2 driver normally
encodes integer range limits using literal values in a const
structure.  This change adds two function pointers, which if not null
will be called through in order to determine integer min / max
values.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4375): Eliminate hardcoded limits in VIDIOC_[S|TRY]_FMT for pvrusb2

The pvrusb2 implementation for VIDIOC_[S|TRY]_FMT was hardcoding
limits on the range for allowed resolution, but it would be much
better if we instead just queried the internal control for these
values.  This then opens the door for the driver to adjust these
limits based on the detected hardware.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4372): Clean up some post mpeg-controls issues in pvrusb2

Fix a few miscellaneous issues in the pvrusb2 driver related to use of
the new mpeg controls.  This also should fix problems involving
update of the saa7115 / cx25840 configuration as control changes are made.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4371): Included missing linux/version.h

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4370): Fix some typos on ioctl handling function

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4366): Remove of couple of useless lines

A buffer was set just before an if block, and then again in both branches
of the if.  Obvious coding error.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4364): V4L2 conversion: radio-maxiradio

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4363): V4L2 conversion: radio-trust

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4362): Cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV Tuner card support

Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for
Swann PCI TV Tuner Card

Signed-off-by: David Bussenschutt <buzz@oska.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4361): Cx88: add support for Norwood PCI TV Tuner (non-pro)

This patch adds support for Norwood PCI TV Tuner (non-pro)

Signed-off-by: Peter Naulls <peter@chocky.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4360): Cx88: add autodetection support for AverMedia M150-D

This patch adds autodetection support for the AverMedia M150-D
blackbird MPEG encoder / analog video capture card.
This board is known to work with the ASUS PVR 416 configuration.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4359): Cx88: add initial support for Hauppauge HVR3000 trimode card

add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
only analog is working for now

Signed-off-by: Eric Thomas <ethomas@claranet.fr>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4358): V4L2 conversion: radio-zoltrix

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4357): V4L2 conversion: radio-typhoon

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4356): V4L2 conversion: radio-terratec

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4355): V4L2 conversion: radio-sf16fmr2

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4354): A small fix at fmi->flags logic

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4353): V4L2 conversion: radio-sf16fmi

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4352): V4L2 conversion: radio-rtrack2

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4351): V4L2 conversion: radio-maestro

Driver conversion to V4L2 API.
Require some testing, since I don't have such hardware

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>