staging: dwc2: reduce noisy debug messages

Change the non-aligned buffer debug messages to dev_vdbg(). Also
remove some duplicated debug output when the driver is loaded.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: fix dwc2_hcd_qtd_add()

The logic in dwc2_hcd_qtd_add() was a bit messy, and one of the
error exit paths was broken. Fix it up.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: optimize dwc2_hc_handle_tt_clear() a bit

Make dwc2_hc_handle_tt_clear() return early if the device is
hi-speed.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: add calls to usb_hcd_link_urb_to_ep() and friends

The driver was lacking calls to usb_hcd_link_urb_to_ep(),
usb_hcd_unlink_urb_from_ep(), and usb_hcd_check_unlink_urb(). Add
those now.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: refactor dwc2_host_complete()

The parameters to dwc2_host_complete() didn't make much sense.
The 'context' parameter always came from the ->priv member of the
'dwc2_urb' parameter, and both of those always came from a struct
dwc2_qtd. So just pass in the struct dwc2_qtd instead.

This also allows us to null out the dwc2_qtd->urb member after it
is freed, which the calling code forgot to do in several places,
causing random driver crashes from dereferencing the freed pointer.

This also requires the calls to dwc2_hc_handle_tt_clear() to be
moved before the calls to dwc2_host_complete(), otherwise that
routine would do nothing because dwc2_qtd->urb has already been
freed.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: access page->private by using page_private macro

Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: return MAC in standard form

MAC respresentation should follow standard form.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: Fix typo in staging/imx-drm

Correct spelling typo in staging/imx-drm

Singed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Qos: Fix some coding style issues

Fixed spacing/tabs issues that were found using checkpatch.

Signed-off-by: Lilis Iskandar <veeableful@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove unused macros r819xU_cmdpkt.c

This patch removes CMPK_DEBOUNCE_CNT and CMPK_PRINT()
because they are not used anywhere in the driver.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix line size and identation in r819xU_cmdpkt.c

This patch limits the line size below 80 characters, when
possible, and fixes identation to meet kernel coding style
convetions.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove unnecessary line continuations in r819xU_cmdpkt.c

This patch fixes the following checkpatch warning:
WARNING: Avoid unnecessary line continuations

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix comments in r819xU_cmdpkt.c

This patches fixes comments by:
- replacing // comments with /**/ comments
- removing unnecessary comments (trailing comments
  with the function name, comments stating date/author
  when they are placed inside the function definition)
- fixing internal alignment

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix whitespace in r819xU_cmdpkt.c

This patch fixes whitespaces in r819xU_cmdpkt.c to
follow the kernel coding style and to improve code
readability.

It fixes the spaces around <,=||&&();} and adds or
removes tabs to better align variables.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix braces in r819xU_cmdpkt.c

This patch fixes the brace position according to the
linux kernel coding style and removes unnecessary braces.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove commented-out code in r819xU_cmdpkt.c

This patch removes commented-out code and the comments
that refer to it to facilitate code review.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: Remove useless unneeded semicolons

Found using coccinelle tool.
Signed-off-by: Vladimir Cernov <gg.kaspersky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: remove typedef for dev_desc_t

Remove the dev_desc_t typedef for the dev_desc struct in bpctl_mod.c,
resolving a checkpatch.pl warning. In fact, we can use an anonymous
struct, since it's only used in the single dev_desc array of device
descriptions, whose definition follows immediately.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: remove the typedef for bpmod_info_t

Remove the bpmod_info_t typedef from bpctl_mod.c, replacing it with
struct bpmod_info.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: remove the bpctl_dev_t typdef

Replace the bpctl_dev_t typdef in bpctl_mod.c with struct bpctl_dev
for coding style compliance.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: binder: fix binder interface for 64bit compat layer

The changes in this patch will fix the binder interface for use on 64bit
machines and stand as the base of the 64bit compat support. The changes
apply to the structures that are passed between the kernel and
userspace.

Most of the  changes applied mirror the change to struct binder_version
where there is no need for a 64bit wide protocol_version(on 64bit
machines). The change inlines with the existing 32bit userspace(the
structure has the same size) and simplifies the compat layer such that
the same handler can service the BINDER_VERSION ioctl.

Other changes make use of kernel types as well as user-exportable ones
and fix format specifier issues.

The changes do not affect existing 32bit ABI.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: binder: replace types with portable ones

Since this driver is meant to be used on different types of processors
and a portable driver should specify the size a variable expects to be
this patch changes the types used throughout the binder interface.

We use "userspace" types since this header will be exported and used by
the Android filesystem.

The patch does not change in any way the functionality of the binder driver.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: binder: fix alignment issues

The Android userspace aligns the data written to the binder buffers to
4bytes. Thus for 32bit platforms or 64bit platforms running an 32bit
Android userspace we can have a buffer looking like this:

platform    buffer(binder_cmd   pointer)      size
32/32                 32b         32b          8B
64/32                 32b         64b          12B
64/64                 32b         64b          12B

Thus the kernel needs to check that the buffer size is aligned to 4bytes
not to (void *) that will be 8bytes on 64bit machines.

The change does not affect existing 32bit ABI.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: binder: fix BC_FREE_BUFFER ioctl declaration

BinderDriverCommands mirror the ioctl usage. Thus the size of the
structure passed through the interface should be used to generate the
ioctl No.

The change reflects the type being passed from the user space-a pointer
to a binder_buffer. This change should not affect the existing 32bit
user space since BC_FREE_BUFFER is computed as:

   #define _IOW(type,nr,size)         \
      ((type) << _IOC_TYPESHIFT) |    \
      ((nr)   << _IOC_NRSHIFT) |      \
      ((size) << _IOC_SIZESHIFT))

and for a 32bit compiler BC_FREE_BUFFER will have the same computed
value. This change will also ease our work in differentiating
BC_FREE_BUFFER from COMPAT_BC_FREE_BUFFER.

The change does not affect existing 32bit ABI.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: binder: fix BINDER_SET_MAX_THREADS declaration

This change will fix the BINDER_SET_MAX_THREADS ioctl to use __u32
instead of size_t for setting the max threads. Thus using the same
handler for 32 and 64bit kernels.

This value is stored internally in struct binder_proc and set to 15
on open_binder() in the libbinder API(thus no need for a 64bit size_t
on 64bit platforms).

The change does not affect existing 32bit ABI.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: binder: modify struct binder_write_read to use size_t

This change mirrors the userspace operation where struct binder_write_read
members that specify the buffer size and consumed size are size_t elements.

The patch also fixes the binder_thread_write() and binder_thread_read()
functions prototypes to conform with the definition of binder_write_read.

The changes do not affect existing 32bit ABI.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Rename Kbuild to Makefile

Rename Kbuild to usual Makefile, consistent with
Kernel build structure.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Convert macro to function.

Replace macro with inline function.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Remove old debug macro.

Remove old oz_trace & oz_trace2 macro & related header files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Replace oz_trace with oz_dbg

Introduce new debug macros: oz_dbg, oz_cdev_dbg, oz_pd_dbg
and then replace old oz_trace & oz_trace2 with new macro.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Remove extra debug logs.

Remove unnecessary debug logs. Most of these logs
print function name at the start of function, which
are not really required.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: COMEDI_NI_LABPC_ISA no longer depends on VIRT_TO_BUS

After migrating ISA DMA support from the "ni_labpc" module to the new
"ni_labpc_isadma" module, the `COMEDI_NI_LABPC_ISA` configuration option
no longer depends on `VIRT_TO_BUS`, so remove the dependency.

(The new `COMEDI_NI_LABPC_ISADMA` option does depend on `VIRT_TO_BUS`
but is not configured manually and is only selected automatically if the
`VIRT_TO_BUS` and `ISA_DMA_API` options are set.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: tidy up after DMA code migration

After migrating the ISA DMA handling code to the "ni_labpc_isadma"
module, get rid of an unneeded `#include` and a couple of unused
static variables.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate DMA status handling

Migrate the code for checking and handling the interrupt status handling
for ISA DMA transfers into new a new function
`labpc_handle_dma_status()` in the "ni_labpc_isadma" module.  Provide a
dummy inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma"
module is not being built.

The static function `handle_isa_dma()` also needs to move across to the
new module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate labpc_drain_dma()

Move `labpc_drain_dma()` into the "ni_labpc_isadma" module.  Provide a
dummy inline function in "ni_labpc_isadma.h" if the module is not being
built.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate DMA transfer set-up

Migrate the code for setting up an ISA DMA transfer into a new function
`labpc_setup_dma()` in the "ni_labpc_isadma" module.  Provide a dummy
inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma" module
is not being built.

The static function `labpc_suggest_transfer_size()` also needs to move
across to the new module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: move register defs to new file

The new "ni_labpc_isadma" module will need to access some register
definitions from "ni_labpc.c", which is not part of the module's source.
Move all the register definitions into a new, common header file
"ni_labpc_regs.h".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: use labpc_have_dma_chan()

Call the new static inline function `labpc_have_dma_chan()` from
`labpc_ai_cmd()` to check if the ISA DMA channel has been initialized,
tidying up the surrounding code and removing an `#ifdef`.  If the
"ni_labpc_isadma" module is not being built, `labpc_have_dma_chan()`
doesn't bother checking the DMA channel and just returns `false`,
allowing the compiler to optimize out a small amount of code.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_isadma: add labpc_have_dma_chan()

Add a static inline function to "ni_labpc_isadma.h" to test if a DMA
channel has been set-up, in which case `devpriv->dma_chan` will be
non-zero (where `devpriv` point to the private data for the comedi
device).  If the "ni_labpc_isadma" module is not being built, don't
bother checking `devpriv->dma_chan`; just return `false` as this may
help the compiler to optimize out some unreachable code.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate DMA channel init & free

Migrate the code for requesting an ISA DMA channel and a DMA buffer, and
the code for freeing them into two new functions in the
"ni_labpc_isadma" module: `labpc_init_dma_chan()` and
`labpc_free_dma_chan()`.  Dummy inline functions are provided in
"ni_labpc_isadma.h" if the "ni_labpc_isadma" module is not being built.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_isadma: new module for ISA DMA support

It's just an empty module at the moment, selected by COMEDI_NI_LABPC_ISA
&& ISA_DMA_API && VIRT_TO_BUS, but will be populated by later patches to
migrate ISA DMA support for NI Lab-PC cards out of the "ni_labpc"
module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: don't clear cmd3 bits explicitly in labpc_ai_cmd()

`labpc_ai_cmd()` calls `labpc_cancel()` which already sets
`devpriv->cmd3` to 0.  Remove the lines from `labpc_ai_cmd()` that clear
specific bits in `devpriv->cmd3` explicitly as they have no effect.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: fix possible double-free of dma_buffer

If `labpc_attach()` allocates memory for `devpriv->dma_buffer` but fails
to request a DMA channel, it frees `devpriv->dma_buffer` but leaves the
pointer set.  Later, `labpc_detach()` frees `devpriv->dma_buffer` again,
which means it has been freed twice in this case.

Fix it by only setting `devpriv->dma_buffer` in `labpc_attach()` if the
DMA channel was requested successfully.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use a mutex when accessing driver list

Low-level comedi drivers registered with the comedi core by
`comedi_driver_register()` are linked together into a simple linked list
headed by the `comedi_drivers` variable and chained by the `next` member
of `struct comedi_driver`.  A driver is removed from the list by
`comedi_driver_unregister()`.  The driver list is iterated through by
`comedi_device_attach()` when the `COMEDI_DEVCONFIG` ioctl is used to
attach a "legacy" device to a driver, and is also iterated through by
`comedi_read()` in "proc.c" when reading "/proc/comedi".

There is currently no protection against items being added or removed
from the list while it is being iterated.  Add a mutex
`comedi_drivers_list_lock` to be locked while adding or removing an item
on the list, or when iterating through the list.

`comedi_driver_unregister()` also checks for and detaches any devices
using the driver.  This is currently done before unlinking the driver
from the list, but it makes more sense to unlink the driver from the
list first to prevent `comedi_device_attach()` attempting to use it, so
move the unlinking part to the start of the function.  Also, in
`comedi_device_attach()` hold on to the mutex until we've finished
attempting to attach the device to avoid it interfering with the
detachment in `comedi_driver_unregister()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: return void from comedi_driver_unregister()

'Unregister' functions generally return `void`.
`comedi_driver_unregister()` currently returns an `int` errno value.
Nothing looks at the return value.  Change the return type to `void`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl724: add support for the PCM-IO48 PC/104 board

This driver can support the WinSystems PCM-IO48 PC/104 board. That
board has two 8255 devices providing 48 digital I/O channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: this is an ISA board not a PCI board

The Intelligent Instrumentation PCI-20001C board is a legacy PC/XT/AT
8-bit ISA board not a PCI board.  The "PCI" appears to mean "Personal
Computer Instrumentation".

Move the Kconfig option into the COMEDI_ISA group.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: do not include <linux/delay.h> if its not needed

Some of the comedi files include this header but don't need it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers do not need <linux/ioport.h>

All the ioport resources are managed by the comedi core. None of
the drivers depend on <linux/ioport.h>. Remove the includes.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't rely on comedidev.h to include headers

comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.

Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.

Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use comedi_alloc_devpriv()

Use the helper function to allocate memory and set the comedi_device
private data pointer.

This removes the dependency on slab.h from most of the drivers so
remove the global #include in comedidev.h and the local #include
in some of the drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: introduce comedi_alloc_devpriv()

Introduce a helper function to allocate memory and set the
comedi_device private data pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unused "helper" macros

This removes a bunch of unused helper macros in the kp30.h file as they
were not being used anywhere, and they better not be used in the future.

Cc: Peng Tao <tao.peng@emc.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: use ERR_CAST() function

use ERR_CAST() function instead of ERR_PTR() and PTR_ERR()
found using coccinelle and err_cast.cocci

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix typo in printk

Correct spelling typo in printk within staging/lustre

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: Keep resend FLocks

FLocks requests (particulary F_UNLCKs) can't be trashed
upon comm problems with Server/MDS nor upon kill/exit,
thus we need to keep retry/send.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2665
Lustre-change: http://review.whamcloud.com/6415
Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/scrub: purge inconsistenct objects after OI scrub

When OI scrub repaired the found inconsistency, it needs to purge the
old object out of cache; otherwise, others may still use those cached
stale information.

Original patch adds functions in obdclass that is only used by server.
Drop that part. Only merge in error handling change.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3335
Lustre-change: http://review.whamcloud.com/6697
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: HSM on disk actions record

HSM coordinator memorizes all actions in a llog
This patch implements the methods needed to create
update display these records.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3339
Lustre-change: http://review.whamcloud.com/6529
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/style: removes obsolete EXPORT_SYMTAB macros v2

EXPORT_SYMTAB is obsolete after 2.4 kernel, this patch removes
EXPORT_SYMTAB from the source code again.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1347
Lustre-change: http://review.whamcloud.com/6739
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Liu Xuezhao <xuezhao.liu@emc.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Anonymous dentry incorrectly identified as root

When exporting Lustre via NFS on SLES11SP2, this check incorrectly identifies
anonymous dentries as root dentries.  This is due to a change in SLES11SP2
which makes the d_name.name for anonymous dentries the same as that for root
dentries.  (Details in LU-3484.)

This changes the check to directly compare the value of the dentry pointer
to the root dentry pointer found in the superblock, rather than using the name.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3484
Lustre-change: http://review.whamcloud.com/6726
Signed-off-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Alexey Shvetsov <alexxy@gentoo.org>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: error of listxattr when buffer is small

According to the standard, listxattr(2) should return -1
and errno should be set to ERANGE if the size of the list
buffer is too small to hold the result. However ll_listxattr()
will return a value bigger than the size of buffer in some cases.

Let's assume listxattr(2) returns SIZE when it is called with a
large enough list buffer. If it's called again with a list buffer
whose size is smaller than SIZE but bigger than (SIZE - 12), then
listxattr(2) will return SIZE too. This patch fixes the problem.
Original patch by Li Xi <pkuelelixi@gmail.com>

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3403
Lustre-change: http://review.whamcloud.com/6463
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Li Xi <pkuelelixi@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: return valid fsid for statfs

Lustre uses 64-bits inode number to identify object on client side.
When re-export Lustre via NFS, NFS will detect whether support fsid
via statfs(). For the non-support case, it will only recognizes and
packs low 32-bits inode number in nfs handle. Such handle cannot be
used to locate the object properly.

To avoid patch linux kernel, Lustre client should generate fsid and
return it via statfs() to up layer.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2904
Lustre-change: http://review.whamcloud.com/6493
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: be more careful processing server name

Because whole options line gets passed to exclude processing, don't
search from end of passed in argument to determine fsname at
beginning.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2200
Lustre-change: http://review.whamcloud.com/6197
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lmv: fix duplicate directory entries

Previously, I accidentally introduced a new way for duplicate
directory entries to be returned from readdir().  That patch fails
to properly decrement the nlupgs counter when breaking out of the
inner-for loop.  This accounting error causes an extra iteration
of the inner-for loop when processing the next cfs page and a bad
ldp_hash_end value is then saved in the lu_dirpage.  To fix this,
always decrement the nlupgs counter on entry into the inner loop.

Note: this bug only affects architectures with > 4k-sized pages, e.g.
PowerPC.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3182
Lustre-change: http://review.whamcloud.com/6405
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/procfs: return -ENOMEM from lprocfs_register()

In lprocfs_register(), if proc_mkdir() fails then return
ERR_PTR(-ENOMEM) rather than NULL and hold _lprocfs_mutex for the
whole function.  In lprocfs_remove_nolock() return early if the entry
is an error pointer. Improve error handling around lprocfs_register()
in a few spots.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2650
Lustre-change: http://review.whamcloud.com/5161
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fld: prepare FLD module for client server split

Split FLD server from client, fld_{handler,index}.c are not compliled
unless server support is enabled.  Do not include dt_object.h or
lustre_mdt.h in lustre_fld.h and fix the minor breakages caused by
this elsewhere.  Generally cleanup includes in lustre/fld.

Signed-off-by: Liu Xuezhao <xuezhao.liu@emc.com>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Lustre-change: http://review.whamcloud.com/2675
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lnet: remove empty file lnet/lnet/api-errno.c

The file is empty. We can just remove it.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2335
Lustre-change: http://review.whamcloud.com/5880
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: Fix flock deadlock detection race

Deadlock isn't detected if 2 threads are trying to
grant 2 locks which deadlock on each other.
They call ldlm_flock_deadlock() simultaneously
and deadlock ins't detected.

The soulition is to add lock to blocking list before
calling ldlm_flock_deadlock()

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1602
Lustre-change: http://review.whamcloud.com/3277
Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Reviewed-by: Bruce Korb <bruce_korb@xyratex.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: call simple_setattr() from ll_md_setattr()

This partially reverts the change from "LU-2482 layout: introduce new
layout for released files" by calling simple_setattr() from
ll_md_setattr() without ATTR_SIZE set. Doing so avoids failed
assertions in osc_page_delete(). Disable truncates on released files
and modify sanity 229 accordingly.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3448
Lustre-change: http://review.whamcloud.com/6643
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: duplicate link names in directory

When creating a hard link to a file, the MDT/MDD/OSD code does
not verify whether the target link name already exists in the
directory.  The ZFS ZAP code checks for duplicate entries. The
add_dirent_to_buf() function in ldiskfs only checks entries for
duplicates while it is traversing the leaf block looking for free
space.  Even if it scanned the whole leaf block, this would not
work for non-htree directories since there is no guarantee that
the name is being inserted into the same leaf block.

To fix this, link should check target object doesn't exist as
other creat operations.

Add sanity.sh test_31o with multiple threads racing to link a new
name into the directory, while ensuring that there is a free entry
in the leaf block that is large enough to hold the duplicate name.
This needs to be racy, because otherwise the client VFS will see
the existing name and not send the RPC to the MDS, hiding the bug.

Add DLDLMRES/PLDLMRES macros for printing the whole lock resource
name (including the name hash) in LDLM_DEBUG() messages in a format
similar to DFID/PFID so they can be found in debug logs more easily.

The patch pickes client side change of the original patch, which only
contains the DLM printk part.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2901
Lustre-change: http://review.whamcloud.com/6591
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/crypto: add crc32c module loading to libcfs

This patch add automatically module loading for crc32c
when libcfs is starting.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2212
Lustre-change: http://review.whamcloud.com/4372
Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Shuichi Ihara <sihara@ddn.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Race between start and stop service threads

When ptlrpc_start_thread fails to create a new thread, it will
finalize and free a struct ptlrpc_thread created and used here.
Considering this, it can be a problem when ptlrpc_svcpt_stop_thread
is driven and handles the struct ptlrpc_thread right after or right
before failure of cfs_create_thread. Because this situation let
the both of ptlrpc_start_thread and ptlrpc_svcpt_stop_threads
access the freed ptlrpc_thread and cause OS panic. Or, it may
happen that ptlrpc_svcpt_stop_threads waits forever holding an
already-freed waitq.

This patch adds an error handling into ptlrpc_start_thread to fix
this problem.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2889
Lustre-change: http://review.whamcloud.com/5552
Signed-off-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: Check return code for lu_kmem_init

lu_kmem_init can fail and returns has a return code.
Check for this return code in lu_kmem_init.

This issue was found during 2gb VM Racer testing

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3063
Lustre-change: http://review.whamcloud.com/6514
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lfsck: LFSCK 1.5 technical debts (3)

Original patch resolves some LFSCK 1.5 technical debts, including:
1) Check and remove repeated linkea entries.
2) Merge some "goto" branches to make the code more readable.
3) Some comments about object's nlink inconsistency processing.

This patch picks the obd flags change.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2915
Lustre-change: http://review.whamcloud.com/6344
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: force lvb_data update after layout change

When a file is restored the layout lock is first
associated with the released layout and after restore
it has to be assocaited with the new layout. This patch
forces lvb_data update in ll_layout_fetch() even if one
is present (case for released->normal state change)

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3299
Lustre-change: http://review.whamcloud.com/6291
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: prepare FID module for client server split

Split FID server from client, fid_{handler,store,lib}.c are not
compliled unless server support is enabled.  Generally cleanup
includes in lustre/fid/ and reduce the need for client code to
directly or indirectly include {dt,md}_object.h.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Lustre-change: http://review.whamcloud.com/2673
Signed-off-by: Liu Xuezhao <xuezhao.liu@emc.com>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix 'code maintainability' errors

Fix 'code maintainability' issues found by Coverity version 6.5.1:
Unused pointer value (UNUSED_VALUE)
Pointer returned by function is never used.
Missing varargs init or cleanup (VARARGS)
va_end was not called for variable.

Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3107
Lustre-change: http://review.whamcloud.com/5944
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llapi: add user space method for lov_user_md

move lov_mds_md_size from obd_lov.h to lustre_idl.h
to have it close to lov_mds_md definition.

add lov_user_md_size() to compute lum size so
llapi and user space utils do not use kernel internal
definitions/methods

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3345
Lustre-change: http://review.whamcloud.com/6345
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: add macros for fid string len

add 2 macros for the length of a fid string 0xSEQ:0xOID:0xVER
and it's brace version (FID_NOBRACE_LEN, and FID_LEN)

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2782
Lustre-change: http://review.whamcloud.com/5299
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/layout: introduce new layout for released files

Released files now have a standard layout (with generation, pool, ...)
and a stripe count 0 and lmm_pattern flag LOV_PATTERN_F_RELEASED.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2482
Lustre-change: http://review.whamcloud.com/4816
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/md: fix lu_ucred.c boilerplate

In preparing Ie3a3cd99 (LU-1330 obdclass: splits server-side object
stack from client) the lu_ucred infrastructure was put in its own
file.  Fixup the boilerplate of this file to give the proper path,
short description, and authors.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Lustre-change: http://review.whamcloud.com/5910
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/dlmlock: compress out unused space

* lustre/include/lustre_dlm.h: Remove all bit fields and the unused
  weighing callback procedure.  respell LDLM_AST_DISCARD_DATA as
  LDLM_FL_AST_DISCARD_DATA to match other flags.
* .gitignore: ignore emacs temporary files
* autogen.sh: rebuild the lock bits, if autogen is available.
* contrib/bit-masks/lustre_dlm_flags.def: define the ldlm_lock flags
* contrib/bit-masks/lustre_dlm_flags.tpl: template for emitting text
* contrib/bit-masks/Makefile: construct the .c and .h files
  The .c file is for constructing a crash extension and is not
  preserved.
* contrib/bit-masks/.gitignore: ignore built products
* lustre/contrib/wireshark/packet-lustre.c: use built files instead
  of local versions of the defines.

In the rest of the modified sources, replace flag field references
with bit mask references.

* lustre/osc/osc_lock.c: removed osc_lock_weigh, too

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2771
Lustre-change: http://review.whamcloud.com/5312
Signed-off-by: Bruce Korb <bruce_korb@xyratex.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: <bruce.korb@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Make quota namespace refcounting consistent

It seems quota namespace is needlessly referenced on connect,
but that's not necessary as it could not go away until entire
obd goes away.
On the other hand this extra reference disturbs other logic
depending on empty namespace having zero refcount, so this patch
drops such extra referencing.

This picks client side change of the original patch.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2924
Lustre-change: http://review.whamcloud.com/6234
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Only wake up ldlm_poold as frequently as the check interval

We used to wake up ldlm poold every second, but that's overkill,
we should just see how much time is left until next closest recalc
interval hits and sleep this much.
This will make "per-second" client grant statistic not actually
per-second, but I don't think we need any precision in that code

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2924
Lustre-change: http://review.whamcloud.com/5793
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: split client namespaces into active and inactive

The main reason behind this is ldlm_poold walks all namespaces currently
no matter if there are any locks or not. On large systems this could take
quite a bit of time, esp. since ldlm_poold is currently woken up once per
second.

Now every time a client namespace loses it's last resource it is placed
into an inactive list that is not touched by ldlm_poold as pointless.
On creation of a first resource in a namespace it is placed back into
the active list.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2924
Lustre-change: http://review.whamcloud.com/5624
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: layout lock rpc must not take rpc_lock

When a client issue an RPC to get a layout lock, it
must not hold rpc_lock because in case of a restore
the rpc can be blocking for a long time

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3200
Lustre-change: http://review.whamcloud.com/6115
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Translate between host and network errnos

Lustre puts system errors (e.g., ENOTCONN) on wire as numbers
essentially specific to senders' architectures.  While this is fine
for x86-only sites, where receivers share the same error number
definition with senders, problems will arise, however, for sites
involving multiple architectures with different error number
definitions.  For instance, an ENOTCONN reply from a sparc server will
be put on wire as -57, which, for an x86 client, means EBADSLT
instead.

To solve the problem, this patch defines a set of network errors for
on-wire or on-disk uses.  These errors correspond to a subset of the
x86 system errors and share the same number definition, maintaining
compatibility with existing x86 clients and servers.

Then, either error numbers could be translated at run time, or all
host errors going on wire could be replaced with network errors in the
code.  This patch does the former by introducing both generic and
field-specific translation routines and calling them at proper places,
so that translations for existing fields are transparent.
(Personally, I tend to think the latter way might be worthwhile, as it
is more straightforward conceptually.  Do we really need so many
different errors?  Should errors returned by kernel routines really be
passed up and eventually put on wire?  There could even be security
implications in that.)

Thank Fujitsu for the original idea and their contributions that make
this available upstream.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2743
Lustre-change: http://review.whamcloud.com/5577
Signed-off-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: race in pinger (use-after-free situation)

The race is result of use-after-free situation:

~ ptlrpc_stop_pinger()          ~ ptlrpc_pinger_main()
---------------------------------------------------------------
thread_set_flags(SVC_STOPPING)
cfs_waitq_signal(pinger_thread) ...
...                             thread_set_flags(SVC_STOPPED)
l_wait_event(thread_is_stopped)
OBD_FREE_PTR(pinger_thread)
...                             cfs_waitq_signal(pinger_thread)
---------------------------------------------------------------

The memory used by pinger_thread might have been freed and
reallocated to something else, when ptlrpc_pinger_main()
used it in cvs_waitq_signal().

Signed-off-by: Li Wei <wei.g.li@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3032
Lustre-change: http://review.whamcloud.com/6040
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: print FID in lvbo_init(), lvbo_update

Print the namespace and OBD device name, as well as the first two
lock resource fields (typically the FID) if there is an error with
loading the object from disk.  This will be more important with
FID-on-OST and also the MDS.  Using fid_extract_from_res_name() isn't
possible in the LDLM code, since the lock resource may not be a FID.

Make fid_extract_quota_resid() argument order and name consistent
with other fid_*_res() functions, with FID first and resource second.

Fix a bug in ofd_lvbo_init() where NULL lvb is accessed on error.

Print FID in ofd_lvbo_update() CDEBUG() and CERROR() messages.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2193
Lustre-change: http://review.whamcloud.com/4501
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: check ll_prep_md_op_data() using IS_ERR()

In ll_file_ioctl() and ll_swap_layouts() check the result of
ll_prep_md_op_data() using IS_ERR().

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3283
Lustre-change: http://review.whamcloud.com/6275
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: A not locked mutex can be unlocked.

In case of memory pressure a not locked mutex can be unlocked
in function ll_file_open(). This is not allowed and subsequent
behavior is not defined.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3157
Lustre-change: http://review.whamcloud.com/6028
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: check alloc in ll_file_data_get, ll_dir_ioctl

In ll_file_data_get() and ll_dir_ioctl() return error on failed
allocations.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2753
Lustre-change: http://review.whamcloud.com/5845
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix 'program hangs' errors

Fix 'program hangs' defects found by Coverity version 6.5.1:
Missing unlock (LOCK)
Returning without unlocking.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3054
Lustre-change: http://review.whamcloud.com/5870
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: missing last bit in ll_have_md_lock

Missing the last bit during INODELOCK check in ll_have_md_lock.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3385
Lustre-change: http://review.whamcloud.com/6438
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: use READ, WRITE around ll_rw_stats_tally()

In vvp_io_write_start() the stats function ll_rw_stats_tally() was
incorrectly called with a rw argument of 0. Correct this and use the
macros READ and WRITE in and around ll_rw_stats_tally() for clarity.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3384
Lustre-change: http://review.whamcloud.com/6447
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove bogus ifndef EXPORT_SYMBOL

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: drop bogus Kconfig default

Commit 4b5b4c7222 ("staging/lustre/libcfs: restore LINVRNT") added
"default false" to this Kconfig file. It was obviously meant to use
"default n" here. But we might as well drop this line, as a Kconfig bool
defaults to 'n' anyway.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: removed dead code from libcfs_string

Confirmed by cscope that the functions are not used anymore. A fresh compilation does not yield any errors.

Signed-off-by: Dragos Foianu <dragos.foianu@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove the second argument of ll_kmap_atomic()

kmap_atomic allows only one argument now, just remove the second.

Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: drop CONFIG_BROKEN

This reverts commit 0ad1ea69545b1965be4c93ee03fdc685c6beb23d

I didn't use git revert because it can not be done cleanly.
Hopefully it will be the last time we do it...

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>