Laurent Pinchart [Sun, 21 Apr 2013 18:21:57 +0000 (20:21 +0200)]
sh-pfc: Add support for SoC-specific initialization
Add two optional init and exit SoC operations and call them from the
core at probe and remove time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 12 Apr 2013 12:21:29 +0000 (14:21 +0200)]
ARM: shmobile: r8a7779 pinmux platform device cleanup
Use DEFINE_RES_MEM() to save a couple of lines of code.
Signed-off-by: Magnus Damm <damm@opensource.se>
[lp: Don't declare r8a7779_pfc_resources as const]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:21 +0000 (11:36 +0200)]
ARM: shmobile: r8a7790: Remove all GPIOs
Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:17 +0000 (11:36 +0200)]
ARM: shmobile: r8a7790: Register GPIO devices
Move GPIOs handling from the PFC device to separate GPIO devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 18 Apr 2013 06:41:50 +0000 (23:41 -0700)]
ARM: shmobile: r8a7778: add GPIO support
This patch was tested on Bock-W board
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 23 Apr 2013 04:32:32 +0000 (04:32 +0000)]
sh-pfc: r8a7778: tidyup SDHI naming suffixes and sort it alphabetically
SDHI 1/2 are the target
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 11:08:05 +0000 (11:08 +0000)]
sh-pfc: r8a7778: Fix outdated GPIO_FN comments
Function GPIOs have been removed, remove comments that refer to them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 12:24:19 +0000 (14:24 +0200)]
sh-pfc: r8a7740: Add bias (pull-up/down) pinconf support
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:30:05 +0000 (00:30 +0200)]
ARM: shmobile: r8a7740: Remove all GPIOs
Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:36:40 +0000 (00:36 +0200)]
sh-pfc: r8a7740: Replace GPIO_PORTx enum with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:29:23 +0000 (00:29 +0200)]
sh-pfc: r8a7740: Remove function GPIOs
No r8a7740 platform use the function GPIOs API. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove HDMI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove FSI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove CEU function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove GETHER function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove BSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove INTC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove SCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bastian Hecht [Wed, 17 Apr 2013 10:34:02 +0000 (10:34 +0000)]
ARM: shmobile: armadillo800eva: Convert SCIFA1 to pinctrl
We use the new pinctrl framework now.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove HDMI function GPIOS
All r8a7740 platforms now use the pinctrl API to control the HDMI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove FSI function GPIOS
All r8a7740 platforms now use the pinctrl API to control the FSI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove CEU function GPIOS
All r8a7740 platforms now use the pinctrl API to control the CEU pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove GETHER function GPIOS
All r8a7740 platforms now use the pinctrl API to control the GETHER
pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove BSC function GPIOS
All r8a7740 platforms now use the pinctrl API to control the BSC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove INTC function GPIOS
All r8a7740 platforms now use the pinctrl API to control the INTC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove SCIF function GPIOS
All r8a7740 platforms now use the pinctrl API to control the SCIF pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:17:58 +0000 (00:17 +0200)]
ARM: shmobile: bonito: Don't configure LCDC routing manually
LCDC routing is configured automatically in the PFC driver, don't
configure it manually in board code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: bonito: Register pinctrl mapping for BSC
Replace the GPIO-based BSC pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: bonito: Register pinctrl mapping for INTC
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: bonito: Register pinctrl mapping for SCIF
Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:27:32 +0000 (01:27 +0200)]
ARM: shmobile: bonito: Remove empty core devices array
The core devices array is empty, passing it to platform_add_devices() is
a no-op. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:32:52 +0000 (00:32 +0200)]
ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:17:58 +0000 (00:17 +0200)]
ARM: shmobile: armadillo800eva: Don't configure LCDC routing manually
LCDC routing is configured automatically in the PFC driver, don't
configure it manually in board code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: armadillo800eva: Register pinctrl mapping for HDMI
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: armadillo800eva: Register pinctrl mapping for FSI
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: armadillo800eva: Register pinctrl mapping for CEU0
Replace the GPIO-based CEU0 pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: armadillo800eva: Register pinctrl mapping for GETHER
Replace the GPIO-based GETHER pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:18:41 +0000 (01:18 +0200)]
ARM: shmobile: armadillo800eva: Register pinctrl mapping for INTC
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 09:52:59 +0000 (11:52 +0200)]
sh-pfc: r8a7740: Hardcode the LCDC0 output
The r8a7740 has two LCDC units and two sets of LCDC output signals. By
default LCDC0 is routed to the LCD0 signals, and LCDC1 to the LCD1
signals. However, LCDC1 can be routed to the LCD0 signals by setting bit
MSEL6 in MSEL3CR (the LCD0 signals are further pinmuxed the usual way).
This could be configured by duplicating the LCD0 pin groups for LCDC1.
However, this would unnecessarily complicate the LCD pin groups, as no
r8a7740 board supported in mainline use such a configuration. Hardcode
the MSEL3CR MSEL6 bit to 0 for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:04:30 +0000 (01:04 +0200)]
sh-pfc: r8a7740: Add HDMI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:04:30 +0000 (01:04 +0200)]
sh-pfc: r8a7740: Add FSI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:04:30 +0000 (01:04 +0200)]
sh-pfc: r8a7740: Add CEU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:04:30 +0000 (01:04 +0200)]
sh-pfc: r8a7740: Add GETHER pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:04:30 +0000 (01:04 +0200)]
sh-pfc: r8a7740: Add BSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 18 Apr 2013 08:54:18 +0000 (10:54 +0200)]
sh-pfc: r8a7740: Declare missing INTC function
When adding the INTC pin groups the INTC function hasn't been added to
the functions list. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:04:30 +0000 (01:04 +0200)]
sh-pfc: r8a7740: Add SCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 12:24:19 +0000 (14:24 +0200)]
sh-pfc: sh7372: Add bias (pull-up/down) pinconf support
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 22:05:41 +0000 (00:05 +0200)]
ARM: shmobile: sh7372: Remove all GPIOs
Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 22:05:16 +0000 (00:05 +0200)]
sh-pfc: sh7372: Remove function GPIOs
No sh7372 platform use the function GPIOs API. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 22:02:06 +0000 (00:02 +0200)]
sh-pfc: sh7372: Replace GPIO_PORTx enum with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for USBHS
Replace the GPIO-based USBHS pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for TSC2007
Replace the GPIO-based TSC2007 pinmux configuration by a pinctrl
mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 16:56:15 +0000 (18:56 +0200)]
ARM: shmobile: ap4evb: Simplify tsc2007 pen state read function
The pen state is retrieved by reading the state of a pin used as an IRQ.
There's no need to reconfigure the pin as a pure GPIO, as the IRQ pin
state can be read.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for SMSC911x
Replace the GPIO-based SMSC911x pinmux configuration by a pinctrl
mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for SCIF
Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for LCD
Replace the GPIO-based LCD pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for KEYSC
Replace the GPIO-based KEYSC pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for HDMI
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for FSI
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: ap4evb: Register pinctrl mapping for CEU
Replace the GPIO-based CEU pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for USBHS
Replace the GPIO-based USBHS pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for TCA6416
Replace the GPIO-based TCA6416 pinmux configuration by a pinctrl
mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for ST1232
Replace the GPIO-based ST1232 pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for SMSC911x
Replace the GPIO-based SMSC911x pinmux configuration by a pinctrl
mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register IRQ pinctrl mapping for SDHI0
Replace the GPIO-based SDHI0 IRQ pinmux configuration by a pinctrl
mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for SCIF
Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for LCD
Replace the GPIO-based LCD pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for HDMI
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for FSI
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for FLCTL
Replace the GPIO-based FLCTL pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for CEU
Replace the GPIO-based CEU pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 11:29:48 +0000 (13:29 +0200)]
ARM: shmobile: mackerel: Register pinctrl mapping for the ADXL34X
Replace the GPIO-based ADXL34X pinmux configuration by a pinctrl
mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add USB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add SCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add LCDC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add KEYSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add INTC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add HDMI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add FSI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add FLCTL pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add CEU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 19 Apr 2013 10:31:08 +0000 (12:31 +0200)]
sh-pfc: sh7372: Add BSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 19 Apr 2013 03:08:23 +0000 (20:08 -0700)]
sh-pfc: r8a7778: add SDHI support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 19 Apr 2013 03:07:34 +0000 (20:07 -0700)]
sh-pfc: r8a7778: add common PFC macro helper
pfc-r8a7778 will have many devices pfc support in the future,
and current pfc-r8a7778 is using pin/mux definition macro for SCIF.
The device definition style using macro is readable code IMO,
but creating new macro for each devices is not good sense.
This patch adds common SH_PFC_xx() macro for each new feature devices
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Vladimir Barinov [Tue, 16 Apr 2013 22:17:28 +0000 (22:17 +0000)]
sh-pfc: r8a7779: add VIN pin groups
Add VIN DATA[0:7]/CLK/HSYNC/VSYNC pin groups to R8A7779 PFC driver.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
[horms+renesas@verge.net.au: trivial rebase on top of
"sh-pfc: r8a7779: Don't group USB OVC and PENC pins"]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 9 Apr 2013 04:54:18 +0000 (04:54 +0000)]
sh-pfc: r8a7779: use RCAR_GP_PIN() on _GP_GPIO() macro
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 10:05:31 +0000 (12:05 +0200)]
sh-pfc: r8a7779: Replace hardcoded pin numbers with RCAR_GP_PIN macro
Use the RCAR_GP_PIN macro to convert from the documentation pin number
space to the linear pinctrl space.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bastian Hecht [Wed, 17 Apr 2013 10:34:01 +0000 (10:34 +0000)]
sh-pfc: r8a7740: Add SCIFA1 data group
Add SCIFA1 as preparation to switch to pinctrl in board files.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 05:37:20 +0000 (05:37 +0000)]
sh-pfc: Add r8a7778 pinmux support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:20 +0000 (11:36 +0200)]
sh-pfc: r8a7790: Don't use GPIO enum entries
Refactor the GPIO macro magic to use GPIO numbers directly instead of
the GPIO_GP_x_y enum entries. This will allow removing the GPIO enum
entries from the mach/r8a7790.h header.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:19 +0000 (11:36 +0200)]
sh-pfc: r8a7790: Remove function GPIOs
No r8a7770 platform use the function GPIOs API. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: fixed typo in changelog: r8a7779 -> r8a7770]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:18 +0000 (11:36 +0200)]
sh-pfc: r8a7790: Remove GPIO data
GPIOs are now handled by a separate driver, remove GPIO data from the
SoC information structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:16 +0000 (11:36 +0200)]
sh-pfc: r8a7790: Add SCIF, SCIFA and SCIFB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:15 +0000 (11:36 +0200)]
sh-pfc: r8a7790: Add INTC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:14 +0000 (11:36 +0200)]
sh-pfc: r8a7790: Add ETH pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 9 Apr 2013 14:06:01 +0000 (14:06 +0000)]
sh-pfc: Remove dependency on GPIOLIB
Make GPIO support optional for platforms that don't support GPIOLIB.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bastian Hecht [Tue, 9 Apr 2013 10:48:50 +0000 (10:48 +0000)]
sh-pfc: Add entries for INTC external IRQs
We add all necessary entries to support the external IRQs from the INTC.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Koji Matsuoka [Mon, 8 Apr 2013 02:08:53 +0000 (11:08 +0900)]
sh-pfc: Initial r8a7790 PFC support
Add initial PFC support for the r8a7790 SoC.
At this point only GPIO interface is supported, move to
newer interfaces planned as incremental changes.
Original authors is Koji Matsuoka-san, thanks for him
and his team for the heavy lifting. Adjusted by Magnus
to work together with updated code in drivers/pinctrl.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@rms.renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 05:37:50 +0000 (05:37 +0000)]
ARM: shmobile: r8a7778: Register PFC device
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 18 Apr 2013 06:41:30 +0000 (23:41 -0700)]
ARM: shmobile: add GPIO IRQ macro
R-Car series gpio_rcar driver can control GPIO IRQ today.
It needs base IRQ number for gpio_rcar_config :: .irq_base
This patch adds macro for GPIO IRQ.
This patch was tested on Bock-W board
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log