Linus Torvalds [Fri, 12 May 2017 16:53:16 +0000 (09:53 -0700)]
Merge tag 'nios2-v4.12-rc1' of git://git./linux/kernel/git/lftan/nios2
Pull nios2 updates from Ley Foon Tan:
"nios2 fixes/enhancements and adding nios2 R2 support"
* tag 'nios2-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: remove custom early console implementation
nios2: use generic strncpy_from_user() and strnlen_user()
nios2: Add CDX support
nios2: Add BMX support
nios2: Add NIOS2_ARCH_REVISION to select between R1 and R2
nios2: implement flush_dcache_mmap_lock/unlock
nios2: enable earlycon support
nios2: constify irq_domain_ops
nios2: remove wrapper header for cmpxchg.h
nios2: add .gitignore entries for auto-generated files
Linus Torvalds [Thu, 11 May 2017 18:29:52 +0000 (11:29 -0700)]
Merge tag 'docs-4.12-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"Connect the newly RST-formatted documentation to the rest; this had to
wait until the input pull was done. There's also a few small fixes
that wandered in"
* tag 'docs-4.12-2' of git://git.lwn.net/linux:
doc: replace FTP URL to kernel.org with HTTPS one
docs: update references to the device io book
Documentation: earlycon: fix Marvell Armada 3700 UART name
docs-rst: add input docs at main index and use kernel-figure
Linus Torvalds [Thu, 11 May 2017 18:27:54 +0000 (11:27 -0700)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
- Silence module allocation failures when CONFIG_ARM*_MODULE_PLTS is
enabled. This requires a check for __GFP_NOWARN in alloc_vmap_area()
- Improve/sanitise user tagged pointers handling in the kernel
- Inline asm fixes/cleanups
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Silence first allocation with CONFIG_ARM64_MODULE_PLTS=y
ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=y
mm: Silence vmap() allocation failures based on caller gfp_flags
arm64: uaccess: suppress spurious clang warning
arm64: atomic_lse: match asm register sizes
arm64: armv8_deprecated: ensure extension of addr
arm64: uaccess: ensure extension of access_ok() addr
arm64: ensure extension of smp_store_release value
arm64: xchg: hazard against entire exchange variable
arm64: documentation: document tagged pointer stack constraints
arm64: entry: improve data abort handling of tagged pointers
arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
arm64: traps: fix userspace cache maintenance emulation on a tagged pointer
Linus Torvalds [Thu, 11 May 2017 18:12:26 +0000 (11:12 -0700)]
Merge tag 'fbdev-v4.12' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here, just a couple of small bugfixes,
improvements and cleanups.
- fix handling of probing errors in omapfb (Arvind Yadav)
- remove incorrect __exit markups in few drivers (Dmitry Torokhov)
- fix boot time logo support for drivers using deferred probe
(Takeshi Kihara)
- fix DMA allocation size for ARM CLCD driver (Liam Beguin)
- add support for specifying size via xenstore in xen-frontfb
(Juergen Gross)
- support for AUS mode in imxfb driver (Martin Kaiser)
- fix buffer on stack usage in udlfb driver (Maksim Salau)
- probe failure path fixup in sm501fb driver (Alexey Khoroshilov)
- fix config dependency loop for stifb driver (Arnd Bergmann)
- misc cleanups (Joe Perches, Christophe Leroy, Karim Eshapa, Pushkar
Jambhlekar)"
* tag 'fbdev-v4.12' of git://github.com/bzolnier/linux:
fbdev: sti: don't select CONFIG_VT
drivers/video/fbdev/omap/lcd_mipid.c: Use time comparison kernel macros
sm501fb: don't return zero on failure path in sm501fb_start()
video: fbdev: udlfb: Fix buffer on stack
video: console: Remove reference to CONFIG_8xx
dt-bindings: display: imx: entry for AUS mode
video: fbdev: imxfb: support AUS mode
drivers/video/fbdev: Fixing coding guidelines in acornfb.c
xen, fbfront: add support for specifying size via xenstore
video: ARM CLCD: fix dma allocation size
drivers/video: Convert remaining uses of pr_warning to pr_warn
video/logo: tidyup fb_logo_late_init initcall timing
video: fbdev: i810: remove incorrect __exit markups
video: fbdev: pmag-aa-fb: remove incorrect __exit markups
video: fbdev: pmagb-b-fb: remove incorrect __exit markups
video: fbdev: pmag-ba-fb: remove incorrect __exit markups
omapfb: dss: Handle return errors in dss_init_ports()
Linus Torvalds [Thu, 11 May 2017 18:01:56 +0000 (11:01 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A smaller collection of fixes that should go into -rc1. This contains:
- A fix from Christoph, fixing a regression with the WRITE_SAME and
partial completions. Caused a BUG() on ppc.
- Fixup for __blk_mq_stop_hw_queues(), it should be static. From
Colin.
- Removal of dmesg error messages on elevator switching, when invoked
from sysfs. From me.
- Fix for blk-stat, using this_cpu_ptr() in a section only protected
by rcu_read_lock(). This breaks when PREEMPT_RCU is enabled. From
me.
- Two fixes for BFQ from Paolo, one fixing a crash and one updating
the documentation.
- An error handling lightnvm memory leak, from Rakesh.
- The previous blk-mq hot unplug lock reversal depends on the CPU
hotplug rework that isn't in mainline yet. This caused a lockdep
splat when people unplugged CPUs with blk-mq devices. From Wanpeng.
- A regression fix for DIF/DIX on blk-mq. From Wen"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: handle partial completions for special payload requests
blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
blk-stat: don't use this_cpu_ptr() in a preemptable section
elevator: remove redundant warnings on IO scheduler switch
block, bfq: stress that low_latency must be off to get max throughput
block, bfq: use pointer entity->sched_data only if set
nvme: lightnvm: fix memory leak
blk-mq: make __blk_mq_stop_hw_queues static
lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning
block/mq: fix potential deadlock during cpu hotplug
Michael Heimpold [Thu, 11 May 2017 08:13:44 +0000 (10:13 +0200)]
doc: replace FTP URL to kernel.org with HTTPS one
FTP services were shutdown some weeks ago, so the FTP URL
does not work anymore. Fix this by replacing it with
corresponding HTTPS URL.
Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Thu, 11 May 2017 17:44:22 +0000 (10:44 -0700)]
Merge tag 'for-linus-
20170510' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"NAND, from Boris:
- some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
davinci, brcmnand, omap)
- a huge cleanup/rework of the denali driver accompanied with core
fixes/improvements to simplify the driver code
- a complete rewrite of the atmel driver to support new DT bindings
make future evolution easier
- the addition of per-vendor detection/initialization steps to avoid
extending the nand_ids table with more extended-id entries
SPI NOR, from Cyrille:
- fixes in the hisi, intel and Mediatek SPI controller drivers
- fixes to some SPI flash memories not supporting the Chip Erase
command.
- add support to some new memory parts (Winbond, Macronix, Micron,
ESMT).
- add new driver for the STM32 QSPI controller
And a few fixes for Gemini and Versatile platforms on physmap-of"
* tag 'for-linus-
20170510' of git://git.infradead.org/linux-mtd: (100 commits)
MAINTAINERS: Update NAND subsystem git repositories
mtd: nand: gpio: update binding
mtd: nand: add ooblayout for old hamming layout
mtd: oxnas_nand: Allocating more than necessary in probe()
dt-bindings: mtd: Document the STM32 QSPI bindings
mtd: mtk-nor: set controller's address width according to nor flash
mtd: spi-nor: add driver for STM32 quad spi flash controller
mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
mtd: nand: davinci: add comment on NAND subpage write status on keystone
mtd: nand: omap2: Fix partition creation via cmdline mtdparts
mtd: nand: NULL terminate a of_device_id table
mtd: nand: Fix a couple error codes
mtd: nand: allow drivers to request minimum alignment for passed buffer
mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
mtd: nand: denali: allow to override revision number
mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
mtd: nand: denali_dt: remove dma-mask DT property
mtd: nand: denali: support 64bit capable DMA engine
mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
mtd: nand: denali: support HW_ECC_FIXUP capability
...
Christoph Hellwig [Thu, 11 May 2017 10:34:38 +0000 (12:34 +0200)]
block: handle partial completions for special payload requests
SCSI devices can return short writes on Write Same just like for normal
writes, so we need to handle this case for our special payload requests
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Florian Fainelli [Thu, 27 Apr 2017 18:19:02 +0000 (11:19 -0700)]
arm64: Silence first allocation with CONFIG_ARM64_MODULE_PLTS=y
When CONFIG_ARM64_MODULE_PLTS is enabled, the first allocation using the
module space fails, because the module is too big, and then the module
allocation is attempted from vmalloc space. Silence the first allocation
failure in that case by setting __GFP_NOWARN.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Florian Fainelli [Thu, 27 Apr 2017 18:19:01 +0000 (11:19 -0700)]
ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=y
When CONFIG_ARM_MODULE_PLTS is enabled, the first allocation using the
module space fails, because the module is too big, and then the module
allocation is attempted from vmalloc space. Silence the first allocation
failure in that case by setting __GFP_NOWARN.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Florian Fainelli [Thu, 27 Apr 2017 18:19:00 +0000 (11:19 -0700)]
mm: Silence vmap() allocation failures based on caller gfp_flags
If the caller has set __GFP_NOWARN don't print the following message:
vmap allocation for size
15736832 failed: use vmalloc=<size> to increase
size.
This can happen with the ARM/Linux or ARM64/Linux module loader built
with CONFIG_ARM{,64}_MODULE_PLTS=y which does a first attempt at loading
a large module from module space, then falls back to vmalloc space.
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tobias Klauser [Thu, 11 May 2017 09:40:16 +0000 (11:40 +0200)]
nios2: remove custom early console implementation
As of commits
d8f347ba35cf ("nios2: enable earlycon support"),
0dcc0542a006 ("serial: altera_jtaguart: add earlycon support") and
4d9d7d896d77 ("serial: altera_uart: add earlycon support"), the nios2
architecture and the altera_uart/altera_jtaguart drivers support
earlycon. Thus, the custom early console implementation for nios2 is no
longer necessary to get early boot messages. Remove it and rely fully on
earlycon support.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Linus Torvalds [Thu, 11 May 2017 03:45:36 +0000 (20:45 -0700)]
Merge tag 'kbuild-uapi-v4.12' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild UAPI updates from Masahiro Yamada:
"Improvement of headers_install by Nicolas Dichtel.
It has been long since the introduction of uapi directories, but the
de-coupling of exported headers has not been completed. Headers listed
in header-y are exported whether they exist in uapi directories or
not. His work fixes this inconsistency.
All (and only) headers under uapi directories are now exported. The
asm-generic wrappers are still exceptions, but this is a big step
forward"
* tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
arch/include: remove empty Kbuild files
uapi: export all arch specifics directories
uapi: export all headers under uapi directories
smc_diag.h: fix include from userland
btrfs_tree.h: fix include from userland
uapi: includes linux/types.h before exporting files
Makefile.headersinst: remove destination-y option
Makefile.headersinst: cleanup input files
x86: stop exporting msr-index.h to userland
nios2: put setup.h in uapi
h8300: put bitsperlong.h in uapi
Linus Torvalds [Thu, 11 May 2017 03:41:43 +0000 (20:41 -0700)]
Merge tag 'kbuild-misc-v4.12' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull misc Kbuild updates from Masahiro Yamada:
- clean up builddeb script
- use full path for KBUILD_IMAGE to fix rpm-pkg build
- fix objdiff tool to ignore debug info
* tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
builddeb: fix typo
builddeb: Update a few outdated and hardcoded strings
deb-pkg: Remove the KBUILD_IMAGE workaround
unicore32: Use full path in KBUILD_IMAGE definition
sh: Use full path in KBUILD_IMAGE definition
arc: Use full path in KBUILD_IMAGE definition
arm: Use full path in KBUILD_IMAGE definition
arm64: Use full path in KBUILD_IMAGE definition
scripts: objdiff: Ignore debug info when comparing
Linus Torvalds [Thu, 11 May 2017 03:11:05 +0000 (20:11 -0700)]
Merge tag 'kbuild-v4.12' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- improve Clang support
- clean up various Makefiles
- improve build log visibility (objtool, alpha, ia64)
- improve compiler flag evaluation for better build performance
- fix GCC version-dependent warning
- fix genksyms
* tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (23 commits)
kbuild: dtbinst: remove unnecessary __dtbs_install_prep target
ia64: beatify build log for gate.so and gate-syms.o
alpha: make short build log available for division routines
alpha: merge build rules of division routines
alpha: add $(src)/ rather than $(obj)/ to make source file path
Makefile: evaluate LDFLAGS_BUILD_ID only once
objtool: make it visible in make V=1 output
kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
kbuild: Add support to generate LLVM assembly files
kbuild: Add better clang cross build support
kbuild: drop -Wno-unknown-warning-option from clang options
kbuild: fix asm-offset generation to work with clang
kbuild: consolidate redundant sed script ASM offset generation
frv: Use OFFSET macro in DEF_*REG()
kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7
kbuild: Consolidate header generation from ASM offset information
kbuild: use -Oz instead of -Os when using clang
kbuild, LLVMLinux: Add -Werror to cc-option to support clang
Kbuild: make designated_init attribute fatal
kbuild: drop unneeded patterns '.*.orig' and '.*.rej' from distclean
...
Linus Torvalds [Thu, 11 May 2017 02:37:14 +0000 (19:37 -0700)]
Merge tag 'rtc-4.12' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"RTC subsystem update:
- Add OF device ID table for i2c drivers
New RTC driver:
- Motorola CPCAP PMIC RTC
RTC driver updates:
- cmos: fix IRQ selection
- ds1307: Add ST m41t0 support
- ds1374: fix watchdog configuration
- sh: Add rza series support"
* tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: gemini: add return value validation
rtc: snvs: fix an incorrect check of return value
rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
rtc: sh: mark PM functions as unused
rtc: hid-sensor-time: remove some dead code
rtc: m41t80: Add proper compatible for rv4162
rtc: ds1307: Add m41t0 to OF device ID table
rtc: ds1307: support m41t0 variant
rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
x86: i8259: export legacy_pic symbol
dt-bindings: rtc: document the rtc-sh bindings
rtc: sh: add support for rza series
rtc: cpcap: kfreeing devm allocated memory
rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
rtc: cpcap: new rtc driver
dt-bindings: Add vendor prefix for Motorola
rtc: omap: mark PM methods as __maybe_unused
rtc: omap: remove incorrect __exit markups
...
Linus Torvalds [Thu, 11 May 2017 02:13:03 +0000 (19:13 -0700)]
Merge tag 'hwparam-
20170420' of git://git./linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-
20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
Boris Brezillon [Wed, 3 May 2017 06:48:55 +0000 (08:48 +0200)]
MAINTAINERS: Update NAND subsystem git repositories
NAND branches are now hosted on MTD repos, nand/next is on l2-mtd and
nand/fixes will be on linux-mtd.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Brian: added branch names]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Christophe Leroy [Wed, 3 May 2017 12:18:24 +0000 (14:18 +0200)]
mtd: nand: gpio: update binding
This patch updates the binding documentation in accordance with
commit
44dd182861f99 ("mtd: nand: gpio: make nCE GPIO optional")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Linus Torvalds [Wed, 10 May 2017 20:38:18 +0000 (13:38 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Sort of on the quieter side this time, which is probably due more to
me not catching up as quickly on patch review than anything else.
Overall it seems normal though, a few small changes to the core,
mostly small non-critical fixes here and there as well as driver
updates for new and existing hardware support.
The biggest things are the TI clk driver rework to lay the groundwork
for clkctrl support in the next merge window and the AmLogic
audio/graphics clk support.
Core:
- clk_possible_parents debugfs file so we know which parents a clk
could possibly have
- Fix to make clk rate change notifiers stop on the first failure
instead of continuing
New Drivers:
- Mediatek MT6797 SoCs
- hi655x PMIC clks
- AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
- Allwinner H5 SoCs and PRCM hardware
Updates:
- Nvidia Tegra T210 cleanups and non-critical fixes
- TI OMAP cleanups in preparation for clkctrl support
- trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
- ZTE zx296718 SoC VGA clks
- Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
- IDT VersaClock 5P49V5935 support
- Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3
support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits)
clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL
clk: ti: divider: try to fix ti_clk_register_divider
clk: mvebu: Use kcalloc() in two functions
clk: mvebu: Use kcalloc() in of_cpu_clk_setup()
clk: nomadik: Delete error messages for a failed memory allocation in two functions
clk: nomadik: Use seq_puts() in nomadik_src_clk_show()
clk: Improve a size determination in two functions
clk: Replace four seq_printf() calls by seq_putc()
clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe()
clk: si5351: Use devm_kcalloc() in si5351_i2c_probe()
clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics()
reset: mediatek: Add MT2701 ethsys reset controller include file
clk: mediatek: add mt2701 ethernet reset
clk: hi6220: Add the hi655x's pmic clock
clk: ti: fix building without legacy omap3
clk: ti: fix linker error with !SOC_OMAP4
clk: hi3620: Fix a typo in one variable name
clk: hi3620: Delete error messages for a failed memory allocation in two functions
clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init()
clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init()
...
Linus Torvalds [Wed, 10 May 2017 20:29:23 +0000 (13:29 -0700)]
Merge tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
Linus Torvalds [Wed, 10 May 2017 20:03:38 +0000 (13:03 -0700)]
Merge tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix use after free in write error path
- Use GFP_NOIO for two allocations in writeback
- Fix a hang in OPEN related to server reboot
- Check the result of nfs4_pnfs_ds_connect
- Fix an rcu lock leak
Features:
- Removal of the unmaintained and unused OSD pNFS layout
- Cleanup and removal of lots of unnecessary dprintk()s
- Cleanup and removal of some memory failure paths now that GFP_NOFS
is guaranteed to never fail.
- Remove the v3-only data server limitation on pNFS/flexfiles
Bugfixes:
- RPC/RDMA connection handling bugfixes
- Copy offload: fixes to ensure the copied data is COMMITed to disk.
- Readdir: switch back to using the ->iterate VFS interface
- File locking fixes from Ben Coddington
- Various use-after-free and deadlock issues in pNFS
- Write path bugfixes"
* tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits)
pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
NFSv4.1: Work around a Linux server bug...
NFS append COMMIT after synchronous COPY
NFSv4: Fix exclusive create attributes encoding
NFSv4: Fix an rcu lock leak
nfs: use kmap/kunmap directly
NFS: always treat the invocation of nfs_getattr as cache hit when noac is on
Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew
NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits
pNFS: Fix a typo in pnfs_generic_alloc_ds_commits
pNFS: Fix a deadlock when coalescing writes and returning the layout
pNFS: Don't clear the layout return info if there are segments to return
pNFS: Ensure we commit the layout if it has been invalidated
pNFS: Don't send COMMITs to the DSes if the server invalidated our layout
pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path
pNFS: Ensure we check layout validity before marking it for return
NFS4.1 handle interrupted slot reuse from ERR_DELAY
NFSv4: check return value of xdr_inline_decode
nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout()
...
Linus Torvalds [Wed, 10 May 2017 18:40:36 +0000 (11:40 -0700)]
Merge tag 'metag-for-v4.12' of git://git./linux/kernel/git/jhogan/metag
Pull metag updates from James Hogan:
"These patches primarily make some usercopy improvements (following on
from the recent usercopy fixes):
- reformat and simplify rapf copy loops
- add 64-bit get_user support
And fix a couple more uaccess issues, partily pointed out by Al:
- fix access_ok() serious shortcomings
- fix strncpy_from_user() address validation
Also included is a trivial removal of a redundant increment"
* tag 'metag-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag/mm: Drop pointless increment
metag/uaccess: Check access_ok in strncpy_from_user
metag/uaccess: Fix access_ok()
metag/usercopy: Add 64-bit get_user support
metag/usercopy: Simplify rapf loop fixup corner case
metag/usercopy: Reformat rapf loop inline asm
Linus Torvalds [Wed, 10 May 2017 18:33:08 +0000 (11:33 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Fixes, cleanups, performance
A bunch of changes to virtio, most affecting virtio net. Also ptr_ring
batched zeroing - first of batching enhancements that seems ready."
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
s390/virtio: change maintainership
tools/virtio: fix spelling mistake: "wakeus" -> "wakeups"
virtio_net: tidy a couple debug statements
ptr_ring: support testing different batching sizes
ringtest: support test specific parameters
ptr_ring: batch ring zeroing
virtio: virtio_driver doc
virtio_net: don't reset twice on XDP on/off
virtio_net: fix support for small rings
virtio_net: reduce alignment for buffers
virtio_net: rework mergeable buffer handling
virtio_net: allow specifying context for rx
virtio: allow extra context per descriptor
tools/virtio: fix build breakage
virtio: add context flag to find vqs
virtio: wrap find_vqs
ringtest: fix an assert statement
Trond Myklebust [Tue, 9 May 2017 20:24:59 +0000 (16:24 -0400)]
nfsd: Fix up the "supattr_exclcreat" attributes
If an NFSv4 client asks us for the supattr_exclcreat, then we must
not return attributes that are unsupported by this minor version.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes:
75976de6556f ("NFSD: Return word2 bitmask if setting security..,")
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Wed, 10 May 2017 18:29:23 +0000 (11:29 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"ARM:
- bugfixes
- moved shared 32-bit/64-bit files to virt/kvm/arm
- support for saving/restoring virtual ITS state to userspace
PPC:
- XIVE (eXternal Interrupt Virtualization Engine) support
x86:
- nVMX improvements, including emulated page modification logging
(PML) which brings nice performance improvements on some workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits)
KVM: arm/arm64: vgic-its: Cleanup after failed ITT restore
KVM: arm/arm64: Don't call map_resources when restoring ITS tables
KVM: arm/arm64: Register ITS iodev when setting base address
KVM: arm/arm64: Get rid of its->initialized field
KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs
KVM: arm/arm64: Slightly rework kvm_vgic_addr
KVM: arm/arm64: Make vgic_v3_check_base more broadly usable
KVM: arm/arm64: Refactor vgic_register_redist_iodevs
KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus
nVMX: Advertise PML to L1 hypervisor
nVMX: Implement emulated Page Modification Logging
kvm: x86: Add a hook for arch specific dirty logging emulation
kvm: nVMX: Validate CR3 target count on nested VM-entry
KVM: set no_llseek in stat_fops_per_vm
KVM: arm/arm64: vgic: Rename kvm_vgic_vcpu_init to kvm_vgic_vcpu_enable
KVM: arm/arm64: Clarification and relaxation to ITS save/restore ABI
KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES
KVM: arm64: vgic-its: Fix pending table sync
KVM: arm64: vgic-its: ITT save and restore
KVM: arm64: vgic-its: Device table save/restore
...
Linus Torvalds [Wed, 10 May 2017 18:26:25 +0000 (11:26 -0700)]
Merge tag 'trace-v4.12-3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This is a trivial patch that changes a check for a cpumask from a NULL
pointer to using cpumask_available(), which will do the check. This is
because cpumasks when not allocated are always set, and clang
complains about it"
* tag 'trace-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use cpumask_available() to check if cpumask variable may be used
J. Bruce Fields [Fri, 5 May 2017 20:17:57 +0000 (16:17 -0400)]
nfsd: encoders mustn't use unitialized values in error cases
In error cases, lgp->lg_layout_type may be out of bounds; so we
shouldn't be using it until after the check of nfserr.
This was seen to crash nfsd threads when the server receives a LAYOUTGET
request with a large layout type.
GETDEVICEINFO has the same problem.
Reported-by: Ari Kauppi <Ari.Kauppi@synopsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Wed, 10 May 2017 18:20:09 +0000 (11:20 -0700)]
Merge tag 'armsoc-tee' of git://git./linux/kernel/git/arm/arm-soc
Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann:
"This introduces a generic TEE framework in the kernel, to handle
trusted environemtns (security coprocessor or software implementations
such as OP-TEE/TrustZone). I'm sending it separately from the other
arm-soc driver changes to give it a little more visibility, once the
subsystem is merged, we will likely keep this in the armâ‚‹soc drivers
branch or have the maintainers submit pull requests directly,
depending on the patch volume.
I have reviewed earlier versions in the past, and have reviewed the
latest version in person during Linaro Connect BUD17.
Here is my overall assessment of the subsystem:
- There is clearly demand for this, both for the generic
infrastructure and the specific OP-TEE implementation.
- The code has gone through a large number of reviews, and the review
comments have all been addressed, but the reviews were not coming
up with serious issues any more and nobody volunteered to vouch for
the quality.
- The user space ioctl interface is sufficient to work with the
OP-TEE driver, and it should in principle work with other TEE
implementations that follow the GlobalPlatform[1] standards, but it
might need to be extended in minor ways depending on specific
requirements of future TEE implementations
- The main downside of the API to me is how the user space is tied to
the TEE implementation in hardware or firmware, but uses a generic
way to communicate with it. This seems to be an inherent problem
with what it is trying to do, and I could not come up with any
better solution than what is implemented here.
For a detailed history of the patch series, see
https://lkml.org/lkml/2017/3/10/1277"
* tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dt: hikey: Add optee node
Documentation: tee subsystem and op-tee driver
tee: add OP-TEE driver
tee: generic TEE subsystem
dt/bindings: add bindings for optee
Linus Torvalds [Wed, 10 May 2017 16:50:55 +0000 (09:50 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main changes are:
- Debloat RCU headers
- Parallelize SRCU callback handling (plus overlapping patches)
- Improve the performance of Tree SRCU on a CPU-hotplug stress test
- Documentation updates
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
rcu: Open-code the rcu_cblist_n_lazy_cbs() function
rcu: Open-code the rcu_cblist_n_cbs() function
rcu: Open-code the rcu_cblist_empty() function
rcu: Separately compile large rcu_segcblist functions
srcu: Debloat the <linux/rcu_segcblist.h> header
srcu: Adjust default auto-expediting holdoff
srcu: Specify auto-expedite holdoff time
srcu: Expedite first synchronize_srcu() when idle
srcu: Expedited grace periods with reduced memory contention
srcu: Make rcutorture writer stalls print SRCU GP state
srcu: Exact tracking of srcu_data structures containing callbacks
srcu: Make SRCU be built by default
srcu: Fix Kconfig botch when SRCU not selected
rcu: Make non-preemptive schedule be Tasks RCU quiescent state
srcu: Expedite srcu_schedule_cbs_snp() callback invocation
srcu: Parallelize callback handling
kvm: Move srcu_struct fields to end of struct kvm
rcu: Fix typo in PER_RCU_NODE_PERIOD header comment
rcu: Use true/false in assignment to bool
rcu: Use bool value directly
...
Linus Torvalds [Wed, 10 May 2017 16:35:42 +0000 (09:35 -0700)]
Merge tag 'acpi-extra-4.12-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20170303 which adds a few minor fixes and improvements, update ACPI
SoC drivers with new device IDs, platform-related information and
similar, fix the register information in the xpower PMIC driver,
introduce a concept of "always present" devices to the ACPI device
enumeration code and use it to fix a problem with one platform, and
fix a system resume issue related to power resources.
Specifics:
- Update the ACPICA code in the kernel to upstream revision
20170303
which includes:
* Minor fixes and improvements in the core code (Bob Moore,
Seunghun Han).
* Debugger fixes (Colin Ian King, Lv Zheng).
* Compiler/disassembler improvements (Bob Moore, David Box, Lv
Zheng).
* Build-related update (Lv Zheng).
- Add new device IDs and platform-related information to the ACPI
drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo, Hans de
Goede).
- Make it possible to quirk ACPI-enumerated devices as "always
present" on platforms where they are incorrectly reported as not
present by the AML and add the INT0002 device ID to the list of
"always present" devices (Hans de Goede).
- Fix the register information in the xpower PMIC driver and add
comments to map the registers to symbols used by AML to it (Hans de
Goede).
- Move the code turning off unused ACPI power resources during system
resume to a point after all devices have been resumed to avoid
issues with power resources that do not behave as expected (Hans de
Goede)"
* tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
ACPI / power: Delay turning off unused power resources after suspend
ACPI / PMIC: xpower: Fix power_table addresses
ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
ACPICA: Update version to
20170303
ACPICA: iasl: add ASL conversion tool
ACPICA: Local cache support: Allow small cache objects
ACPICA: Disassembler: Do not unconditionally remove temporary names
ACPICA: iasl: Fix IORT SMMU GSI disassembling
ACPICA: Cleanup AML opcode definitions, no functional change
ACPICA: Debugger: Add interpreter blocking mark for single-step mode
ACPICA: debugger: fix memory leak on Pathname
ACPICA: Update for automatic repair code for objects returned by evaluate_object
ACPICA: Namespace: fix operand cache leak
ACPICA: Fix several incorrect invocations of ACPICA return macro
ACPICA: Fix a module for excessive debug output
ACPICA: Update some function headers, no funtional change
ACPICA: Disassembler: Enhance resource descriptor detection
i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller
ACPI / bus: Add INT0002 to list of always-present devices
...
Linus Torvalds [Wed, 10 May 2017 16:12:30 +0000 (09:12 -0700)]
Merge tag 'pm-extra-4.12-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These add new CPU IDs to a couple of drivers, fix a possible NULL
pointer dereference in the cpuidle core, update DT-related things in
the generic power domains framework and finally update the
suspend/resume infrastructure to improve the handling of wakeups from
suspend-to-idle.
Specifics:
- Add Intel Gemini Lake CPU IDs to the intel_idle and intel_rapl
drivers (David Box).
- Add a NULL pointer check to the cpuidle core to prevent it from
crashing on platforms with incomplete cpuidle configuration (Fei
Li).
- Fix DT-related documentation in the generic power domains (genpd)
framework and add a MAINTAINERS entry for DT-related material in
genpd (Viresh Kumar).
- Update the system suspend/resume infrastructure to improve the
handling of aborts of suspend transitions in progress in the wakeup
framework and rework the suspend-to-idle core loop to make it
possible to filter out spurious wakeup events (specifically the
ones coming from ACPI) without resuming all the way up to user
space every time (Rafael Wysocki)"
* tag 'pm-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle
PM / wakeup: Integrate mechanism to abort transitions in progress
x86/intel_idle: add Gemini Lake support
cpuidle: check dev before usage in cpuidle_use_deepest_state()
powercap: intel_rapl: Add support for Gemini Lake
PM / Domains: Add DT file to MAINTAINERS
PM / Domains: Fix DT example
Linus Torvalds [Wed, 10 May 2017 16:03:48 +0000 (09:03 -0700)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
"The biggest part of this is making st_dev/st_ino on the overlay behave
like a normal filesystem (i.e. st_ino doesn't change on copy up,
st_dev is the same for all files and directories). Currently this only
works if all layers are on the same filesystem, but future work will
move the general case towards more sane behavior.
There are also miscellaneous fixes, including fixes to handling
append-only files. There's a small change in the VFS, but that only
has an effect on overlayfs, since otherwise file->f_path.dentry->inode
and file_inode(file) are always the same"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update documentation w.r.t. constant inode numbers
ovl: persistent inode numbers for upper hardlinks
ovl: merge getattr for dir and nondir
ovl: constant st_ino/st_dev across copy up
ovl: persistent inode number for directories
ovl: set the ORIGIN type flag
ovl: lookup non-dir copy-up-origin by file handle
ovl: use an auxiliary var for overlay root entry
ovl: store file handle of lower inode on copy up
ovl: check if all layers are on the same fs
ovl: do not set overlay.opaque on non-dir create
ovl: check IS_APPEND() on real upper inode
vfs: ftruncate check IS_APPEND() on real upper inode
ovl: Use designated initializers
ovl: lockdep annotate of nested stacked overlayfs inode lock
Linus Torvalds [Wed, 10 May 2017 15:45:30 +0000 (08:45 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"Support for pid namespaces from Seth and refcount_t work from Elena"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Add support for pid namespaces
fuse: convert fuse_conn.count from atomic_t to refcount_t
fuse: convert fuse_req.count from atomic_t to refcount_t
fuse: convert fuse_file.count from atomic_t to refcount_t
Linus Torvalds [Wed, 10 May 2017 15:42:33 +0000 (08:42 -0700)]
Merge tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The two main items are support for disabling automatic rbd exclusive
lock transfers from myself and the long awaited -ENOSPC handling
series from Jeff.
The former will allow rbd users to take advantage of exclusive lock's
built-in blacklist/break-lock functionality while staying in control
of who owns the lock. With the latter in place, we will abort
filesystem writes on -ENOSPC instead of having them block
indefinitely.
Beyond that we've got the usual pile of filesystem fixes from Zheng,
some refcount_t conversion patches from Elena and a patch for an
ancient open() flags handling bug from Alexander"
* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
ceph: fix memory leak in __ceph_setxattr()
ceph: fix file open flags on ppc64
ceph: choose readdir frag based on previous readdir reply
rbd: exclusive map option
rbd: return ResponseMessage result from rbd_handle_request_lock()
rbd: kill rbd_is_lock_supported()
rbd: support updating the lock cookie without releasing the lock
rbd: store lock cookie
rbd: ignore unlock errors
rbd: fix error handling around rbd_init_disk()
rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
ceph: when seeing write errors on an inode, switch to sync writes
Revert "ceph: SetPageError() for writeback pages if writepages fails"
ceph: handle epoch barriers in cap messages
libceph: add an epoch_barrier field to struct ceph_osd_client
libceph: abort already submitted but abortable requests when map or pool goes full
libceph: allow requests to return immediately on full conditions if caller wishes
libceph: remove req->r_replay_version
ceph: make seeky readdir more efficient
...
Linus Torvalds [Wed, 10 May 2017 15:33:17 +0000 (08:33 -0700)]
Merge branch 'for-linus-4.12' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
"This has fixes and cleanups Dave Sterba collected for the merge
window.
The biggest functional fixes are between btrfs raid5/6 and scrub, and
raid5/6 and device replacement. Some of our pending qgroup fixes are
included as well while I bash on the rest in testing.
We also have the usual set of cleanups, including one that makes
__btrfs_map_block() much more maintainable, and conversions from
atomic_t to refcount_t"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits)
btrfs: fix the gfp_mask for the reada_zones radix tree
Btrfs: fix reported number of inode blocks
Btrfs: send, fix file hole not being preserved due to inline extent
Btrfs: fix extent map leak during fallocate error path
Btrfs: fix incorrect space accounting after failure to insert inline extent
Btrfs: fix invalid attempt to free reserved space on failure to cow range
btrfs: Handle delalloc error correctly to avoid ordered extent hang
btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
btrfs: check if the device is flush capable
btrfs: delete unused member nobarriers
btrfs: scrub: Fix RAID56 recovery race condition
btrfs: scrub: Introduce full stripe lock for RAID56
btrfs: Use ktime_get_real_ts for root ctime
Btrfs: handle only applicable errors returned by btrfs_get_extent
btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
btrfs: use q which is already obtained from bdev_get_queue
Btrfs: switch to div64_u64 if with a u64 divisor
Btrfs: update scrub_parity to use u64 stripe_len
Btrfs: enable repair during read for raid56 profile
btrfs: use clear_page where appropriate
...
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:17 +0000 (14:20 +0200)]
arch/include: remove empty Kbuild files
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:16 +0000 (14:20 +0200)]
uapi: export all arch specifics directories
This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.
The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.
Note that only cris and tile have more directories than only asm:
- arch-v[10|32] for cris;
- arch for tile.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:15 +0000 (14:20 +0200)]
uapi: export all headers under uapi directories
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.
In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.
After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h
Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).
Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.
For the record, note that exported files for asm directories are a mix of
files listed by:
- include/uapi/asm-generic/Kbuild.asm;
- arch/<arch>/include/uapi/asm/Kbuild;
- arch/<arch>/include/asm/Kbuild.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:14 +0000 (14:20 +0200)]
smc_diag.h: fix include from userland
This patch prepares the uapi export by fixing the following error:
.../linux/smc_diag.h:6:27: fatal error: rdma/ib_verbs.h: No such file or directory
#include <rdma/ib_verbs.h>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:12 +0000 (14:20 +0200)]
btrfs_tree.h: fix include from userland
This patch prepares the uapi export by fixing the following errors:
.../linux/btrfs_tree.h:283:2: error: #error "UUID items require BTRFS_UUID_SIZE == 16!"
#error "UUID items require BTRFS_UUID_SIZE == 16!"
.../linux/btrfs_tree.h:390:12: error: ‘BTRFS_UUID_SIZE’ undeclared here (not in a function)
__u8 uuid[BTRFS_UUID_SIZE];
^
.../linux/btrfs_tree.h:796:16: error: ‘BTRFS_DEV_STAT_VALUES_MAX’ undeclared here (not in a function)
__le64 values[BTRFS_DEV_STAT_VALUES_MAX];
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:11 +0000 (14:20 +0200)]
uapi: includes linux/types.h before exporting files
Some files will be exported after a following patch. 0-day tests report the
following warning/error:
./usr/include/linux/bcache.h:8: include of <linux/types.h> is preferred over <asm/types.h>
./usr/include/linux/bcache.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/qrtr.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/cryptouser.h:39: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/pr.h:14: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/btrfs_tree.h:337: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/rdma/bnxt_re-abi.h:45: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:10 +0000 (14:20 +0200)]
Makefile.headersinst: remove destination-y option
This option was added in commit
c7bb349e7c25 ("kbuild: introduce destination-y
for exported headers") but never used in-tree.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:09 +0000 (14:20 +0200)]
Makefile.headersinst: cleanup input files
After the last three patches, all exported headers are under uapi/, thus
input-files2 are not needed anymore.
The side effect is that input-files1-name is exactly header-y.
Note also that input-files3-name is genhdr-y.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:08 +0000 (14:20 +0200)]
x86: stop exporting msr-index.h to userland
Even if this file was not in an uapi directory, it was exported because
it was listed in the Kbuild file.
Fixes:
b72e7464e4cf ("x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:07 +0000 (14:20 +0200)]
nios2: put setup.h in uapi
This header file is exported, but from a userland pov, it's just a wrapper
to asm-generic/setup.h.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Nicolas Dichtel [Mon, 27 Mar 2017 12:20:06 +0000 (14:20 +0200)]
h8300: put bitsperlong.h in uapi
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Wen Xiong [Wed, 10 May 2017 13:54:11 +0000 (08:54 -0500)]
blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns
"Input/output error". Looks block layer split the bio after calling
bio_integrity_prep(bio). This patch fixes the issue.
Below is how we debug this issue:
(1)format nvme to 4K block # size with type 2 DIF
(2)dd with block size bigger than 1024k.
oflag=direct
dd: error writing '/dev/nvme0n1': Input/output error
We added some debug code in nvme device driver. It showed us the first
op and the second op have the same bi and pi address. This is not
correct.
1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
dsmgmt=0x0, AT=0x0 & RT=0x505
Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828
2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires..
Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828
With the fix, It showed us both of the first op and the second op have
correct bi and pi address.
1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
dsmgmt=0x0, AT=0x0 & RT=0x505
Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual
0x00002828
2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
AT=0x0 & RT=0x605
Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual
0x00003028
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jens Axboe [Tue, 9 May 2017 17:39:56 +0000 (11:39 -0600)]
blk-stat: don't use this_cpu_ptr() in a preemptable section
If PREEMPT_RCU is enabled, rcu_read_lock() isn't strong enough
for us to use this_cpu_ptr() in that section. Use the safer
get/put_cpu_ptr() variants instead.
Reported-by: Mike Galbraith <efault@gmx.de>
Fixes:
34dbad5d26e2 ("blk-stat: convert to callback-based statistics reporting")
Signed-off-by: Jens Axboe <axboe@fb.com>
Jens Axboe [Wed, 10 May 2017 13:40:04 +0000 (07:40 -0600)]
elevator: remove redundant warnings on IO scheduler switch
We warn twice for switching to a scheduler, if that switch fails.
As we also report the failure in the return value to the
sysfs write, remove the dmesg induced failures.
Keep the failure print for warning to switch to the kconfig
selected IO scheduler, as we can't report errors for that in
any other way.
Signed-off-by: Jens Axboe <axboe@fb.com>
Paolo Valente [Tue, 9 May 2017 10:54:23 +0000 (12:54 +0200)]
block, bfq: stress that low_latency must be off to get max throughput
The introduction of the BFQ and Kyber I/O schedulers has triggered a
new wave of I/O benchmarks. Unfortunately, comments and discussions on
these benchmarks confirm that there is still little awareness that it
is very hard to achieve, at the same time, a low latency and a high
throughput. In particular, virtually all benchmarks measure
throughput, or throughput-related figures of merit, but, for BFQ, they
use the scheduler in its default configuration. This configuration is
geared, instead, toward a low latency. This is evidently a sign that
BFQ documentation is still too unclear on this important aspect. This
commit addresses this issue by stressing how BFQ configuration must be
(easily) changed if the only goal is maximum throughput.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Paolo Valente [Tue, 9 May 2017 09:37:27 +0000 (11:37 +0200)]
block, bfq: use pointer entity->sched_data only if set
In the function __bfq_deactivate_entity, the pointer
entity->sched_data could happen to be used before being properly
initialized. This led to a NULL pointer dereference. This commit fixes
this bug by just using this pointer only where it is safe to do so.
Reported-by: Tom Harrison <l12436.tw@gmail.com>
Tested-by: Tom Harrison <l12436.tw@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Rakesh Pandit [Tue, 9 May 2017 14:48:25 +0000 (08:48 -0600)]
nvme: lightnvm: fix memory leak
Free up kmalloc allocated memory if failure happens while handling L2P
table transfer in nvme_nvm_get_l2p_tbl.
Fixes:
8e79b5cb ("lightnvm: move block provisioning to targets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Tue, 9 May 2017 22:56:58 +0000 (15:56 -0700)]
Merge git://git./linux/kernel/git/davem/ide
Pull IDE updates from David Miller:
"Two small cleanups in the IDE layer"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: don't call memcpy with the same source and destination
ide: use setup_timer
Linus Torvalds [Tue, 9 May 2017 22:48:29 +0000 (15:48 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc updates from David Miller:
"sparc changes, including a bug fix for handling exceptions during
bzero on some sparc64 cpus"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: fix fault handling in NGbzero.S and GENbzero.S
sparc: use memdup_user_nul in sun4m LED driver
sparc: Remove redundant tests in boot_flags_init().
Linus Torvalds [Tue, 9 May 2017 22:42:31 +0000 (15:42 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix multiqueue in stmmac driver on PCI, from Andy Shevchenko.
2) cdc_ncm doesn't actually fully zero out the padding area is
allocates on TX, from Jim Baxter.
3) Don't leak map addresses in BPF verifier, from Daniel Borkmann.
4) If we randomize TCP timestamps, we have to do it everywhere
including SYN cookies. From Eric Dumazet.
5) Fix "ethtool -S" crash in aquantia driver, from Pavel Belous.
6) Fix allocation size for ntp filter bitmap in bnxt_en driver, from
Dan Carpenter.
7) Add missing memory allocation return value check to DSA loop driver,
from Christophe Jaillet.
8) Fix XDP leak on driver unload in qed driver, from Suddarsana Reddy
Kalluru.
9) Don't inherit MC list from parent inet connection sockets, another
syzkaller spotted gem. Fix from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
dccp/tcp: do not inherit mc_list from parent
qede: Split PF/VF ndos.
qed: Correct doorbell configuration for !4Kb pages
qed: Tell QM the number of tasks
qed: Fix VF removal sequence
qede: Fix XDP memory leak on unload
net/mlx4_core: Reduce harmless SRIOV error message to debug level
net/mlx4_en: Avoid adding steering rules with invalid ring
net/mlx4_en: Change the error print to debug print
drivers: net: wimax: i2400m: i2400m-usb: Use time_after for time comparison
DECnet: Use container_of() for embedded struct
Revert "ipv4: restore rt->fi for reference counting"
net: mdio-mux: bcm-iproc: call mdiobus_free() in error path
net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf
net: cdc_ncm: Fix TX zero padding
stmmac: pci: split out common_default_data() helper
stmmac: pci: RX queue routing configuration
stmmac: pci: TX and RX queue priority configuration
stmmac: pci: set default number of rx and tx queues
...
Linus Torvalds [Tue, 9 May 2017 22:40:28 +0000 (15:40 -0700)]
Merge tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time again a smaller update consisting of:
- support for TI DA8xx dma controller and updates to the cppi driver
- updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor,
ioat, dmatest"
* tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits)
dmaengine: pl08x: remove lock documentation
dmaengine: pl08x: fix pl08x_dma_chan_state documentation
dmaengine: pl08x: Use the BIT() macro consistently
dmaengine: pl080: Fix some missing kerneldoc
dmaengine: pl080: Cut some unused defines
dmaengine: dmatest: Add check for supported buffer count (sg_buffers)
dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test
dmaengine: virt-dma: Convert to use list_for_each_entry_safe()
dma-debug: use offset_in_page() macro
dmaengine: mv_xor: use offset_in_page() macro
dmaengine: dmatest: use offset_in_page() macro
dmaengine: sun4i: fix invalid argument
dmaengine: ioat: use setup_timer
dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe()
dmaengine: pl330: remove pdata based initialization
dmaengine: cppi: fix build error due to bad variable
dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
dmaengine: cppi41: use managed functions devm_*()
dmaengine: cppi41: fix cppi41_dma_tx_status() logic
dmaengine: qcom_hidma: pause the channel on shutdown
...
Linus Torvalds [Tue, 9 May 2017 22:34:20 +0000 (15:34 -0700)]
Merge tag 'pwm/for-4.12-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Adds a new driver for the PWM controller found on MediaTek SoCs and
extends support for the Atmel PWM controller to include the SAMA5D2.
Some existing drivers have been migrated to the atomic API and a few
others see miscellaneous improvements"
* tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: tegra: Read PWM clock source rate in driver init
pwm: pca9685: Fix GPIO-only operation
pwm: mediatek: Don't explicitly set .owner
pwm: tegra: Avoid potential overflow for short periods
pwm: tegra: Add support to configure pin state in suspends/resume
pwm: tegra: Add DT binding details to configure pin in suspends/resume
pwm: tegra: Increase precision in PWM rate calculation
pwm: tegra: Use DIV_ROUND_CLOSEST_ULL() instead of local implementation
pwm: Add MediaTek PWM support
dt-bindings: pwm: Add MediaTek PWM bindings
pwm: atmel: Enable PWM on sama5d2
pwm: atmel: Switch to atomic PWM
pwm: atmel-hlcdc: Implement the suspend/resume hooks
pwm: atmel-hlcdc: Convert to the atomic PWM API
Linus Torvalds [Tue, 9 May 2017 22:15:47 +0000 (15:15 -0700)]
Merge tag 'iommu-updates-v4.12' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- code optimizations for the Intel VT-d driver
- ability to switch off a previously enabled Intel IOMMU
- support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
IOMMUs
- header optimizations for IOMMU core code headers and a few fixes that
became necessary in other parts of the kernel because of that
- ACPI/IORT updates and fixes
- Exynos IOMMU optimizations
- updates for the IOMMU dma-api code to bring it closer to use per-cpu
iova caches
- new command-line option to set default domain type allocated by the
iommu core code
- another command line option to allow the Intel IOMMU switched off in
a tboot environment
- ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
Support for 16-bit ASIDs (was previously broken)
- various other small fixes and improvements
* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
soc/qbman: Move dma-mapping.h include to qman_priv.h
soc/qbman: Fix implicit header dependency now causing build fails
iommu: Remove trace-events include from iommu.h
iommu: Remove pci.h include from trace/events/iommu.h
arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
ACPI/IORT: Fix CONFIG_IOMMU_API dependency
iommu/vt-d: Don't print the failure message when booting non-kdump kernel
iommu: Move report_iommu_fault() to iommu.c
iommu: Include device.h in iommu.h
x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
iommu/arm-smmu: Correct sid to mask
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
omap3isp: Remove iommu_group related code
iommu/omap: Add iommu-group support
iommu/omap: Make use of 'struct iommu_device'
iommu/omap: Store iommu_dev pointer in arch_data
iommu/omap: Move data structures to omap-iommu.h
iommu/omap: Drop legacy-style device support
...
Rafael J. Wysocki [Tue, 9 May 2017 21:23:02 +0000 (23:23 +0200)]
Merge branches 'acpi-soc', 'acpi-bus', 'acpi-pmic' and 'acpi-power'
* acpi-soc:
ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller
* acpi-bus:
ACPI / bus: Add INT0002 to list of always-present devices
ACPI / bus: Introduce a list of ids for "always present" devices
* acpi-pmic:
ACPI / PMIC: xpower: Fix power_table addresses
* acpi-power:
ACPI / power: Delay turning off unused power resources after suspend
Rafael J. Wysocki [Tue, 9 May 2017 21:22:36 +0000 (23:22 +0200)]
Merge branch 'acpica'
* acpica:
ACPICA: Update version to
20170303
ACPICA: iasl: add ASL conversion tool
ACPICA: Local cache support: Allow small cache objects
ACPICA: Disassembler: Do not unconditionally remove temporary names
ACPICA: iasl: Fix IORT SMMU GSI disassembling
ACPICA: Cleanup AML opcode definitions, no functional change
ACPICA: Debugger: Add interpreter blocking mark for single-step mode
ACPICA: debugger: fix memory leak on Pathname
ACPICA: Update for automatic repair code for objects returned by evaluate_object
ACPICA: Namespace: fix operand cache leak
ACPICA: Fix several incorrect invocations of ACPICA return macro
ACPICA: Fix a module for excessive debug output
ACPICA: Update some function headers, no funtional change
ACPICA: Disassembler: Enhance resource descriptor detection
ACPICA: Add non-linux host build support
Rafael J. Wysocki [Tue, 9 May 2017 21:21:46 +0000 (23:21 +0200)]
Merge branches 'pm-domains', 'pm-cpuidle', 'pm-sleep' and 'powercap'
* pm-domains:
PM / Domains: Add DT file to MAINTAINERS
PM / Domains: Fix DT example
* pm-cpuidle:
x86/intel_idle: add Gemini Lake support
cpuidle: check dev before usage in cpuidle_use_deepest_state()
* pm-sleep:
ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle
PM / wakeup: Integrate mechanism to abort transitions in progress
* powercap:
powercap: intel_rapl: Add support for Gemini Lake
Ari Kauppi [Fri, 5 May 2017 20:07:55 +0000 (16:07 -0400)]
nfsd: fix undefined behavior in nfsd4_layout_verify
UBSAN: Undefined behaviour in fs/nfsd/nfs4proc.c:1262:34
shift exponent 128 is too large for 32-bit type 'int'
Depending on compiler+architecture, this may cause the check for
layout_type to succeed for overly large values (which seems to be the
case with amd64). The large value will be later used in de-referencing
nfsd4_layout_ops for function pointers.
Reported-by: Jani Tuovila <tuovila@synopsys.com>
Signed-off-by: Ari Kauppi <ari@synopsys.com>
[colin.king@canonical.com: use LAYOUT_TYPE_MAX instead of 32]
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trond Myklebust [Tue, 9 May 2017 20:02:57 +0000 (16:02 -0400)]
pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
Layoutstats is always desirable when using the flexfiles driver, so
we should enable it if that driver is being loaded. It is safe to do
so, because even when the mount specifies NFSv4.1, we will turn it
off if the server tells us it is unsupported.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Tue, 9 May 2017 19:47:15 +0000 (15:47 -0400)]
NFSv4.1: Work around a Linux server bug...
It turns out the Linux server has a bug in its implementation of
supattr_exclcreat; it returns the set of all attributes, whether
or not they are supported by minor version 1.
In order to avoid a regression, we therefore apply the supported_attrs
as a mask on top of whatever the server sent us.
Reported-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Helmut Grohne [Wed, 3 May 2017 09:51:46 +0000 (11:51 +0200)]
docs: update references to the device io book
While converting the deviceiobook from DocBook to RST, dangling
references were left behind. This commit updates all remaining
references to the new location. SeongJae Park improved the ko_KR
translation.
Fixes:
8a8a602fdb83 ("docs: Convert the deviceio template to RST")
Signed-off-by: Helmut Grohne <h.grohne@intenta.de>
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Andre Przywara [Wed, 3 May 2017 23:49:36 +0000 (00:49 +0100)]
Documentation: earlycon: fix Marvell Armada 3700 UART name
The Marvell Armada 3700 UART uses "ar3700_uart" for its earlycon name.
Adjust documentation to match the code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 11 Apr 2017 10:01:19 +0000 (07:01 -0300)]
docs-rst: add input docs at main index and use kernel-figure
The input subsystem documentation got converted into ReST.
Add it to the main documentation index and use kernel-figure
for the two svg images there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Eric Dumazet [Tue, 9 May 2017 13:29:19 +0000 (06:29 -0700)]
dccp/tcp: do not inherit mc_list from parent
syzkaller found a way to trigger double frees from ip_mc_drop_socket()
It turns out that leave a copy of parent mc_list at accept() time,
which is very bad.
Very similar to commit
8b485ce69876 ("tcp: do not inherit
fastopen_req from parent")
Initial report from Pray3r, completed by Andrey one.
Thanks a lot to them !
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Pray3r <pray3r.z@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Aldridge [Tue, 9 May 2017 08:57:35 +0000 (02:57 -0600)]
sparc64: fix fault handling in NGbzero.S and GENbzero.S
When any of the functions contained in NGbzero.S and GENbzero.S
vector through *bzero_from_clear_user, we may end up taking a
fault when executing one of the store alternate address space
instructions. If this happens, the exception handler does not
restore the %asi register.
This commit fixes the issue by introducing a new exception
handler that ensures the %asi register is restored when
a fault is handled.
Orabug:
25577560
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Sat, 6 May 2017 15:40:20 +0000 (23:40 +0800)]
sparc: use memdup_user_nul in sun4m LED driver
Use memdup_user_nul() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 9 May 2017 17:10:15 +0000 (10:10 -0700)]
Merge tag 'arc-4.12-rc1' of git://git./linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- AXS10x platform clk updates for I2S, PGU
- add region based cache flush operation for ARCv2 cores
- enforce PAE40 dependency on HIGHMEM
- ptrace support for additional regs in ARCv2 cores
- fix build failure in linux-next dut to a header include ordering
change
* tag 'arc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
Revert "ARCv2: Allow enabling PAE40 w/o HIGHMEM"
ARC: mm: fix build failure in linux-next for UP builds
ARCv2: ptrace: provide regset for accumulator/r30 regs
elf: Add ARCv2 specific core note section
ARCv2: mm: micro-optimize region flush generated code
ARCv2: mm: Merge 2 updates to DC_CTRL for region flush
ARCv2: mm: Implement cache region flush operations
ARC: mm: Move full_page computation into cache version agnostic wrapper
arc: axs10x: Fix ARC PGU default clock frequency
arc: axs10x: Add DT bindings for I2S audio playback
Linus Torvalds [Tue, 9 May 2017 17:07:33 +0000 (10:07 -0700)]
Merge tag 'armsoc-dt64' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Olof Johansson:
"Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
of smaller changes, but also some new platforms that are worth
mentioning:
- Rockchip RK3399 platforms for Chromebooks, including Samsung
Chromebook Plus (Kevin)
- Orange Pi PC2 (Allwinner H5)
- Freescale LS2088A and LS1088A SoCs
- Expanded support for Nvidia Tegra186 (and Jetson TX2)"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
arm64: dts: Add basic DT to support Spreadtrum's SP9860G
arm64: dts: exynos: Use - instead of @ for DT OPP entries
arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
arm64: dts: juno: add information about L1 and L2 caches
arm64: dts: juno: fix few unit address format warnings
arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
arm64: marvell: dts: add crypto engine description for 7k/8k
arm64: dts: marvell: add sdhci support for Armada 7K/8K
arm64: dts: marvell: add eMMC support for Armada 37xx
arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
arm64: dts: hisi: add SAS nodes for the hip07 SoC
arm64: dts: hisi: add RoCE nodes for the hip07 SoC
arm64: dts: hisi: add network related nodes for the hip07 SoC
arm64: dts: hisi: add mbigen nodes for the hip07 SoC
arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
...
Linus Torvalds [Tue, 9 May 2017 17:04:17 +0000 (10:04 -0700)]
Merge tag 'armsoc-arm64' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Olof Johansson:
"Changes to platform code for 64-bit ARM platforms.
Most of these are small changes to the one defconfig we use on arm64
(no per-platform configs there), to enable new drivers.
There are also a few other changes. Broadcom sold off their 'Vulcan'
design to Cavium, where it is now called ThunderX2. While we normally
don't rename stuff based on marketing's whims, it seemed appropriate
to bring in renames on a few things such as MAINTAINERS, etc"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: sunxi: always enable reset controller
arm64: defconfig: enable the Safexcel crypto engine as a module
arm64: configs: enable SDHCI driver for Xenon
MAINTAINERS: Broadcom Vulcan is now Cavium ThunderX2
arm64: defconfig: add Allwinner USB PHY
arm64: defconfig: enable MVPP2
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
arm64: exynos: Enable Exynos PMU and PM domains drivers
arm64: only select PINCTRL for Allwinner platforms
arm64: set CONFIG_MMC_BCM2835=y in defconfig
arm64: defconfig: enable I2C_PXA
arm64: defconfig: enable MVNETA
ARM64: defconfig: enable the leds-pwm driver and default-on trigger
arm64: defconfig: Enable SH Mobile I2C controller
Linus Torvalds [Tue, 9 May 2017 17:01:15 +0000 (10:01 -0700)]
Merge tag 'armsoc-drivers' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs:
Reset subsystem, merged through arm-soc by tradition:
- Make bool drivers explicitly non-modular
- New support for i.MX7 and Arria10 reset controllers
PATA driver for Palmchip BK371 (acked by Tejun)
Power domain drivers for i.MX (GPC, GPCv2)
- Moved out of mach-imx for GPC
- Bunch of tweaks, fixes, etc
PMC support for Tegra186
SoC detection support for Renesas RZ/G1H and RZ/G1N
Move Tegra flow controller driver from mach directory to drivers/soc
- (Power management / CPU power driver)
Misc smaller tweaks for other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
soc: pm-domain: Fix the mangled urls
soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
soc: renesas: rcar-sysc: Add support for fixing up power area tables
soc: renesas: Register SoC device early
soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
soc: imx: gpc: add defines for domain index
soc: imx: Add GPCv2 power gating driver
dt-bindings: Add GPCv2 power gating driver
ARM/clk: move the ICST library to drivers/clk
ARM: plat-versatile: remove stale clock header
ARM: keystone: Drop PM domain support for k2g
soc: ti: Add ti_sci_pm_domains driver
dt-bindings: Add TI SCI PM Domains
PM / Domains: Do not check if simple providers have phandle cells
PM / Domains: Add generic data pointer to genpd data struct
soc/tegra: Add initial flowctrl support for Tegra132/210
soc/tegra: flowctrl: Add basic platform driver
soc/tegra: Move Tegra flowctrl driver
ARM: tegra: Remove unnecessary inclusion of flowctrl header
...
Linus Torvalds [Tue, 9 May 2017 16:58:15 +0000 (09:58 -0700)]
Merge tag 'armsoc-defconfig' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM: SoC defconfig updates from Olof Johansson:
"We've traditionally kept defconfig updates in a separate branch, often
to encourage submaintainers to handle those patches separately to
avoid conflicts on the shared files. The amount of changes seem to be
decreasing though, so we might rethink how we handle this going
forward.
There really isn't much to write about here. The bulk of changes here
are enabling drivers for whatever platforms the hardware is found on
(and multi-configs)"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
multi_v7_defconfig: make Rockchip usb2-phy built-in
ARM: omap2plus_defconfig: Enable droid 4 devices
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
ARM: configs: aspeed: Add new drivers
ARM: configs: aspeed: Update configs for BMC systems
ARM: omap2plus_defconfig: Enable TI Ethernet PHY
ARM: configs: Add new config fragment to change RAM start point
ARM: configs: stm32: Add I2C support
multi_v7_defconfig: make Rockchip DRM drivers built-in
ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: davinci_all_defconfig: convert to use libata PATA
ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
ARM: omap2plus_defconfig: enable ahci-dm816 module
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
ARM: bcm2835: Enable missing CMA settings for VC4 driver
ARM: socfpga: updates for socfpga_defconfig
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
...
Linus Torvalds [Tue, 9 May 2017 16:54:39 +0000 (09:54 -0700)]
Merge tag 'armsoc-dt' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM Device-tree updates from Olof Johansson:
"Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
Major new platforms:
- Gemini has been ported to DT, so a handful of "new" platforms moved
over from board files
- Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
SoM and RDK
- A bunch of embedded platforms, several Linksys platforms, Synology
DS116,
- Motorola Droid4 (really old OMAP-based phone) support is added.
Some refactorings, i.e. Allwinner H3/H5 support is commonalized.
And lots of smaller changes, cleanups, etc. See shortlog for more
description
We're adding ability to cross-include DT files between arm and arm64,
by creating appropriate links in the dt-include directory, and using
arm/ and arm64/ as include prefixes. This will avoid other local hacks
such as per-file links between the two arch trees (this broke for
external mirroring of DT contents). Now they can just provide their
own appropriate dt-include hierarcy per platform"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
ARM: dts: exynos: Use - instead of @ for DT OPP entries
arm: spear6xx: add DT description of the ADC on SPEAr600
arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
arm: spear6xx: switch spear600-evb to the new flash partition DT binding
arm: spear6xx: fix spaces in spear600-evb.dts
arm: spear6xx: use node labels in spear600-evb.dts
arm: spear6xx: add labels to various nodes in spear600.dtsi
ARM: dts: vexpress: fix few unit address format warnings
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
ARM: dts: at91: sama5d3_xplained: fix ADC vref
ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
ARM: dts: armada-38x: label USB and SATA nodes
ARM: dts: imx6q-utilite-pro: add hpd gpio
ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
ARM: dts: imx: add Gateworks Ventana GW5903 support
ARM: dts: i.MX25: add AIPS control registers
ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
ARM: dts: imx7-colibri: remove 1.8V fixed regulator
ARM: dts: imx7-colibri: allow to disable Ethernet rail
...
Linus Torvalds [Tue, 9 May 2017 16:49:36 +0000 (09:49 -0700)]
Merge tag 'armsoc-soc' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
Gemini:
- Legacy platform that Linus Walleij has converted to multiplatform
and DT, so a handful of various tweaks there, removal of some old
stale support, etc.
Atmel AT91:
- Fixup of various power management related pieces
- Move of SoC detection to a drivers/soc driver instead
ST Micro STM32:
- New SoC support: STM32H743
TI platforms:
- More driver support for Davinci (SATA in particular)
- Removal of some old stale hwmod files (linkspace platform)
Misc:
- A couple of smaller patches for i.MX, sunxi, hisi"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
ARM: davinci: Add clock for CPPI 4.1 DMA engine
ARM: mxs: add support for I2SE Duckbill 2 boards
MAINTAINERS: Update the Allwinner sunXi entry
ARM: i.MX25: globally disable supervisor protect
ARM: at91: move SoC detection to its own driver
ARM: at91: pm: correct typo
ARM: at91: pm: Remove at91_pm_set_standby
ARM: at91: pm: Merge all at91sam9*_pm_init
ARM: at91: pm: Tie the USB clock mask to the pmc
ARM: at91: pm: Tie the memory controller type to the ramc id
ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
ARM: at91: pm: Simplify at91rm9200_standby
ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S
ARM: at91: pm: Move global variables into at91_pm_data
ARM: at91: pm: Move at91_ramc_read/write to pm.c
ARM: at91: pm: Cleanup headers
MAINTAINERS: Add memory drivers to AT91 entry
MAINTAINERS: Update AT91 entry
ARM: davinci: add pata_bk3710 libata driver support
ARM: OMAP2+: mark omap_init_rng as __init
...
Mark Rutland [Wed, 3 May 2017 15:09:38 +0000 (16:09 +0100)]
arm64: uaccess: suppress spurious clang warning
Clang tries to warn when there's a mismatch between an operand's size,
and the size of the register it is held in, as this may indicate a bug.
Specifically, clang warns when the operand's type is less than 64 bits
wide, and the register is used unqualified (i.e. %N rather than %xN or
%wN).
Unfortunately clang can generate these warnings for unreachable code.
For example, for code like:
do { \
typeof(*(ptr)) __v = (v); \
switch(sizeof(*(ptr))) { \
case 1: \
// assume __v is 1 byte wide \
asm ("{op}b %w0" : : "r" (v)); \
break; \
case 8: \
// assume __v is 8 bytes wide \
asm ("{op} %0" : : "r" (v)); \
break; \
}
while (0)
... if op() were passed a char value and pointer to char, clang may
produce a warning for the unreachable case where sizeof(*(ptr)) is 8.
For the same reasons, clang produces warnings when __put_user_err() is
used for types that are less than 64 bits wide.
We could avoid this with a cast to a fixed-width type in each of the
cases. However, GCC will then warn that pointer types are being cast to
mismatched integer sizes (in unreachable paths).
Another option would be to use the same union trickery as we do for
__smp_store_release() and __smp_load_acquire(), but this is fairly
invasive.
Instead, this patch suppresses the clang warning by using an x modifier
in the assembly for the 8 byte case of __put_user_err(). No additional
work is necessary as the value has been cast to typeof(*(ptr)), so the
compiler will have performed any necessary extension for the reachable
case.
For consistency, __get_user_err() is also updated to use the x modifier
for its 8 byte case.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Wed, 3 May 2017 15:09:37 +0000 (16:09 +0100)]
arm64: atomic_lse: match asm register sizes
The LSE atomic code uses asm register variables to ensure that
parameters are allocated in specific registers. In the majority of cases
we specifically ask for an x register when using 64-bit values, but in a
couple of cases we use a w regsiter for a 64-bit value.
For asm register variables, the compiler only cares about the register
index, with wN and xN having the same meaning. The compiler determines
the register size to use based on the type of the variable. Thus, this
inconsistency is merely confusing, and not harmful to code generation.
For consistency, this patch updates those cases to use the x register
alias. There should be no functional change as a result of this patch.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Wed, 3 May 2017 15:09:36 +0000 (16:09 +0100)]
arm64: armv8_deprecated: ensure extension of addr
Our compat swp emulation holds the compat user address in an unsigned
int, which it passes to __user_swpX_asm(). When a 32-bit value is passed
in a register, the upper 32 bits of the register are unknown, and we
must extend the value to 64 bits before we can use it as a base address.
This patch casts the address to unsigned long to ensure it has been
suitably extended, avoiding the potential issue, and silencing a related
warning from clang.
Fixes:
bd35a4adc413 ("arm64: Port SWP/SWPB emulation support from arm")
Cc: <stable@vger.kernel.org> # 3.19.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Wed, 3 May 2017 15:09:35 +0000 (16:09 +0100)]
arm64: uaccess: ensure extension of access_ok() addr
Our access_ok() simply hands its arguments over to __range_ok(), which
implicitly assummes that the addr parameter is 64 bits wide. This isn't
necessarily true for compat code, which might pass down a 32-bit address
parameter.
In these cases, we don't have a guarantee that the address has been zero
extended to 64 bits, and the upper bits of the register may contain
unknown values, potentially resulting in a suprious failure.
Avoid this by explicitly casting the addr parameter to an unsigned long
(as is done on other architectures), ensuring that the parameter is
widened appropriately.
Fixes:
0aea86a2176c ("arm64: User access library functions")
Cc: <stable@vger.kernel.org> # 3.7.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Wed, 3 May 2017 15:09:34 +0000 (16:09 +0100)]
arm64: ensure extension of smp_store_release value
When an inline assembly operand's type is narrower than the register it
is allocated to, the least significant bits of the register (up to the
operand type's width) are valid, and any other bits are permitted to
contain any arbitrary value. This aligns with the AAPCS64 parameter
passing rules.
Our __smp_store_release() implementation does not account for this, and
implicitly assumes that operands have been zero-extended to the width of
the type being stored to. Thus, we may store unknown values to memory
when the value type is narrower than the pointer type (e.g. when storing
a char to a long).
This patch fixes the issue by casting the value operand to the same
width as the pointer operand in all cases, which ensures that the value
is zero-extended as we expect. We use the same union trickery as
__smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that
pointers are potentially cast to narrower width integers in unreachable
paths.
A whitespace issue at the top of __smp_store_release() is also
corrected.
No changes are necessary for __smp_load_acquire(). Load instructions
implicitly clear any upper bits of the register, and the compiler will
only consider the least significant bits of the register as valid
regardless.
Fixes:
47933ad41a86 ("arch: Introduce smp_load_acquire(), smp_store_release()")
Fixes:
878a84d5a8a1 ("arm64: add missing data types in smp_load_acquire/smp_store_release")
Cc: <stable@vger.kernel.org> # 3.14.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Wed, 3 May 2017 15:09:33 +0000 (16:09 +0100)]
arm64: xchg: hazard against entire exchange variable
The inline assembly in __XCHG_CASE() uses a +Q constraint to hazard
against other accesses to the memory location being exchanged. However,
the pointer passed to the constraint is a u8 pointer, and thus the
hazard only applies to the first byte of the location.
GCC can take advantage of this, assuming that other portions of the
location are unchanged, as demonstrated with the following test case:
union u {
unsigned long l;
unsigned int i[2];
};
unsigned long update_char_hazard(union u *u)
{
unsigned int a, b;
a = u->i[1];
asm ("str %1, %0" : "+Q" (*(char *)&u->l) : "r" (0UL));
b = u->i[1];
return a ^ b;
}
unsigned long update_long_hazard(union u *u)
{
unsigned int a, b;
a = u->i[1];
asm ("str %1, %0" : "+Q" (*(long *)&u->l) : "r" (0UL));
b = u->i[1];
return a ^ b;
}
The linaro 15.08 GCC 5.1.1 toolchain compiles the above as follows when
using -O2 or above:
0000000000000000 <update_char_hazard>:
0:
d2800001 mov x1, #0x0 // #0
4:
f9000001 str x1, [x0]
8:
d2800000 mov x0, #0x0 // #0
c:
d65f03c0 ret
0000000000000010 <update_long_hazard>:
10:
b9400401 ldr w1, [x0,#4]
14:
d2800002 mov x2, #0x0 // #0
18:
f9000002 str x2, [x0]
1c:
b9400400 ldr w0, [x0,#4]
20:
4a000020 eor w0, w1, w0
24:
d65f03c0 ret
This patch fixes the issue by passing an unsigned long pointer into the
+Q constraint, as we do for our cmpxchg code. This may hazard against
more than is necessary, but this is better than missing a necessary
hazard.
Fixes:
305d454aaa29 ("arm64: atomics: implement native {relaxed, acquire, release} atomics")
Cc: <stable@vger.kernel.org> # 4.4.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kristina Martsenko [Wed, 3 May 2017 15:37:48 +0000 (16:37 +0100)]
arm64: documentation: document tagged pointer stack constraints
Some kernel features don't currently work if a task puts a non-zero
address tag in its stack pointer, frame pointer, or frame record entries
(FP, LR).
For example, with a tagged stack pointer, the kernel can't deliver
signals to the process, and the task is killed instead. As another
example, with a tagged frame pointer or frame records, perf fails to
generate call graphs or resolve symbols.
For now, just document these limitations, instead of finding and fixing
everything that doesn't work, as it's not known if anyone needs to use
tags in these places anyway.
In addition, as requested by Dave Martin, generalize the limitations
into a general kernel address tag policy, and refactor
tagged-pointers.txt to include it.
Fixes:
d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kristina Martsenko [Wed, 3 May 2017 15:37:47 +0000 (16:37 +0100)]
arm64: entry: improve data abort handling of tagged pointers
When handling a data abort from EL0, we currently zero the top byte of
the faulting address, as we assume the address is a TTBR0 address, which
may contain a non-zero address tag. However, the address may be a TTBR1
address, in which case we should not zero the top byte. This patch fixes
that. The effect is that the full TTBR1 address is passed to the task's
signal handler (or printed out in the kernel log).
When handling a data abort from EL1, we leave the faulting address
intact, as we assume it's either a TTBR1 address or a TTBR0 address with
tag 0x00. This is true as far as I'm aware, we don't seem to access a
tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to
forget about address tags, and code added in the future may not always
remember to remove tags from addresses before accessing them. So add tag
handling to the EL1 data abort handler as well. This also makes it
consistent with the EL0 data abort handler.
Fixes:
d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kristina Martsenko [Wed, 3 May 2017 15:37:46 +0000 (16:37 +0100)]
arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
When we take a watchpoint exception, the address that triggered the
watchpoint is found in FAR_EL1. We compare it to the address of each
configured watchpoint to see which one was hit.
The configured watchpoint addresses are untagged, while the address in
FAR_EL1 will have an address tag if the data access was done using a
tagged address. The tag needs to be removed to compare the address to
the watchpoints.
Currently we don't remove it, and as a result can report the wrong
watchpoint as being hit (specifically, always either the highest TTBR0
watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.
Fixes:
d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kristina Martsenko [Wed, 3 May 2017 15:37:45 +0000 (16:37 +0100)]
arm64: traps: fix userspace cache maintenance emulation on a tagged pointer
When we emulate userspace cache maintenance in the kernel, we can
currently send the task a SIGSEGV even though the maintenance was done
on a valid address. This happens if the address has a non-zero address
tag, and happens to not be mapped in.
When we get the address from a user register, we don't currently remove
the address tag before performing cache maintenance on it. If the
maintenance faults, we end up in either __do_page_fault, where find_vma
can't find the VMA if the address has a tag, or in do_translation_fault,
where the tagged address will appear to be above TASK_SIZE. In both
cases, the address is not mapped in, and the task is sent a SIGSEGV.
This patch removes the tag from the address before using it. With this
patch, the fault is handled correctly, the address gets mapped in, and
the cache maintenance succeeds.
As a second bug, if cache maintenance (correctly) fails on an invalid
tagged address, the address gets passed into arm64_notify_segfault,
where find_vma fails to find the VMA due to the tag, and the wrong
si_code may be sent as part of the siginfo_t of the segfault. With this
patch, the correct si_code is sent.
Fixes:
7dd01aef0557 ("arm64: trap userspace "dc cvau" cache operation on errata-affected core")
Cc: <stable@vger.kernel.org> # 4.8.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Tue, 9 May 2017 16:20:16 +0000 (09:20 -0700)]
Merge tag 'armsoc-fixes-nc' of git://git./linux/kernel/git/arm/arm-soc
Pull misc ARM SoC fixes from Olof Johansson:
"ARM SoC non-urgent fixes for merge window
Smaller patches that didn't seem to find a home in other branches, and
low-priority fixes from late in the merge window. A number of these
are MAINTAINER updates, it seems.
Highlights:
* Maintainers:
- Remove Alexandre Courbot and Stephen Warren from Tegra
maintainership, add Jon Hunter
- Remove Stephen Warren and add Stefan Wahren to bcm2835
- Tweaks for file flagging for Marvell Dove
* Fixes:
- For two non-common-clk platform, handle clk_disable with NULL arg
- Remove redundant Kconfig select for Oxnas"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mmp: let clk_disable() return immediately if clk is NULL
ARM: w90x900: let clk_disable() return immediately if clk is NULL
MAINTAINERS: Add file patterns for dove device tree bindings
ARM: oxnas: remove redundant select CPU_V6K
MAINTAINERS: tegra: Remove self as maintainer
MAINTAINERS: tegra: Replace Stephen with Jon
MAINTAINERS: Add Stefan Wahren to bcm2835.
MAINTAINERS: remove swarren from bcm2835
MAINTAINERS: Add Jon Mason to BCM5301X maintainers
Linus Torvalds [Tue, 9 May 2017 16:12:53 +0000 (09:12 -0700)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted bits and pieces from various people. No common topic in this
pile, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/affs: add rename exchange
fs/affs: add rename2 to prepare multiple methods
Make stat/lstat/fstatat pass AT_NO_AUTOMOUNT to vfs_statx()
fs: don't set *REFERENCED on single use objects
fs: compat: Remove warning from COMPATIBLE_IOCTL
remove pointless extern of atime_need_update_rcu()
fs: completely ignore unknown open flags
fs: add a VALID_OPEN_FLAGS
fs: remove _submit_bh()
fs: constify tree_descr arrays passed to simple_fill_super()
fs: drop duplicate header percpu-rwsem.h
fs/affs: bugfix: Write files greater than page size on OFS
fs/affs: bugfix: enable writes on OFS disks
fs/affs: remove node generation check
fs/affs: import amigaffs.h
fs/affs: bugfix: make symbolic links work again
Linus Torvalds [Tue, 9 May 2017 16:01:21 +0000 (09:01 -0700)]
Merge branch 'work.iov_iter' of git://git./linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"Braino fix for iov_iter_revert() misuse"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix braino in generic_file_read_iter()
Linus Torvalds [Tue, 9 May 2017 15:45:16 +0000 (08:45 -0700)]
proc: try to remove use of FOLL_FORCE entirely
We fixed the bugs in it, but it's still an ugly interface, so let's see
if anybody actually depends on it. It's entirely possible that nothing
actually requires the whole "punch through read-only mappings"
semantics.
For example, gdb definitely uses the /proc/<pid>/mem interface, but it
looks like it mainly does it for regular reads of the target (that don't
need FOLL_FORCE), and looking at the gdb source code seems to fall back
on the traditional ptrace(PTRACE_POKEDATA) interface if it needs to.
If this breaks something, I do have a (more complex) version that only
enables FOLL_FORCE when somebody has PTRACE_ATTACH'ed to the target,
like the comment here used to say ("Maybe we should limit FOLL_FORCE to
actual ptrace users?").
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Tue, 9 May 2017 15:24:24 +0000 (11:24 -0400)]
Merge branch 'qed-general-fixes'
Yuval Mintz says:
====================
qed*: General fixes
This series contain several fixes for qed and qede.
- #1 [and ~#5] relate to XDP cleanups
- #2 and #5 correct VF behavior
- #3 and #4 fix and add missing configurations needed for RoCE & storage
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 9 May 2017 12:07:51 +0000 (15:07 +0300)]
qede: Split PF/VF ndos.
PFs and VFs share the same structure of NDOs today,
and the VFs explicitly fails the ndo_xdp() callback stating
it doesn't support XDP.
This results in lots of:
[qede_xdp:1032(enp131s2)]VFs don't support XDP
------------[ cut here ]------------
WARNING: CPU: 4 PID: 1426 at net/core/rtnetlink.c:1637 rtnl_dump_ifinfo+0x354/0x3c0
...
Call Trace:
? __alloc_skb+0x9b/0x1d0
netlink_dump+0x122/0x290
netlink_recvmsg+0x27d/0x430
sock_recvmsg+0x3d/0x50
...
As every dump request for the VF interface info would fail due to
rtnl_xdp_fill() returning an error code.
To resolve this, introduce a subset of the NDOs meant for the VF
in a seperate structure and register that one instead for VFs,
and omit the ndo_xdp initialization.
Fixes:
40b8c45492ef ("qede: Prevent VFs from using XDP")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Tue, 9 May 2017 12:07:50 +0000 (15:07 +0300)]
qed: Correct doorbell configuration for !4Kb pages
When configuring the doorbell DPI address, driver aligns the start
address to 4KB [HW-pages] instead of host PAGE_SIZE.
As a result, RoCE applications might receive addresses which are
unaligned to pages [when PAGE_SIZE > 4KB], which is a security risk.
Fixes:
51ff17251c9c ("qed: Add support for RoCE hw init")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 9 May 2017 12:07:49 +0000 (15:07 +0300)]
qed: Tell QM the number of tasks
Driver doesn't pass the number of tasks to the QM init logic
which would cause back-pressure in scenarios requiring many tasks
[E.g., using max MRs] and thus reduced performance.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 9 May 2017 12:07:48 +0000 (15:07 +0300)]
qed: Fix VF removal sequence
After previos changes in HW-stop scheme, VFs stopped sending CLOSE
messages to their PFs when they unload.
Fixes:
1226337ad98f ("qed: Correct HW stop flow")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suddarsana Reddy Kalluru [Tue, 9 May 2017 12:07:47 +0000 (15:07 +0300)]
qede: Fix XDP memory leak on unload
When (re|un)loading, Tx-queues belonging to XDP would not get freed.
Fixes:
cb6aeb079294 ("qede: Add support for XDP_TX")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 May 2017 15:22:48 +0000 (11:22 -0400)]
Merge branch 'mlx4-misc-fixes'
Tariq Toukan says:
====================
mlx4 misc fixes
This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.
Series generated against net commit:
32f1bc0f3d26 Revert "ipv4: restore rt->fi for reference counting"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Tue, 9 May 2017 11:45:24 +0000 (14:45 +0300)]
net/mlx4_core: Reduce harmless SRIOV error message to debug level
Under SRIOV resource management, extra counters are allocated to VFs
from a free pool. If that pool is empty, the ALLOC_RES command for
a counter resource fails -- and this generates a misleading error
message in the message log.
Under SRIOV, each VF is allocated (i.e., guaranteed) 2 counters --
one counter per port. For ETH ports, the RoCE driver requests an
additional counter (above the guaranteed counters). If that request
fails, the VF RoCE driver simply uses the default (i.e., guaranteed)
counter for that port.
Thus, failing to allocate an additional counter does not constitute
a problem, and the error message on the PF when this occurs should
be reduced to debug level.
Finally, to identify the situation that the reason for the failure is
that no resources are available to grant to the VF, we modified the
error returned by mlx4_grant_resource to -EDQUOT (Quota exceeded),
which more accurately describes the error.
Fixes:
c3abb51bdb0e ("IB/mlx4: Add RoCE/IB dedicated counters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>