GitHub/LineageOS/android_kernel_motorola_exynos9610.git
19 years ago[PATCH] x86-64: Don't assign CPU numbers in SRAT parsing
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Don't assign CPU numbers in SRAT parsing

Do that later when the CPU boots. SRAT just stores the APIC<->Node
mapping node. This fixes problems on systems where the order
of SRAT entries does not match the MADT.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: White space and comment fixes for smp_call_function_single
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: White space and comment fixes for smp_call_function_single

No functional changes

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Enable interrupts during delay calibration on APs
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Enable interrupts during delay calibration on APs

We used to disable them to work around a bug, but that
is not needed anymore. Keeping them enabled avoids the NMI
watchdog triggering in some cases.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Use largest APIC number, not number of CPUs to decide on physflat...
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Use largest APIC number, not number of CPUs to decide on physflat mode

Handles case where BIOS gives CPUs very large APIC numbers correctly.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove code for outdated APICs
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove code for outdated APICs

No x86-64 chipset has these APICs.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove esr disable hack in APIC code
Andi Kleen [Mon, 12 Sep 2005 16:49:23 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove esr disable hack in APIC code

This was just needed for the Numasaurus, which fortunately
doesn't support x86-64 CPUs.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove obsolete APIC "write around" bug workaround
Andi Kleen [Mon, 12 Sep 2005 16:49:23 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove obsolete APIC "write around" bug workaround

No x86-64 chipset has this bug

Generated code doesn't change because it was always disabled.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove apic_write_around from smpboot.c
Andi Kleen [Mon, 12 Sep 2005 16:49:23 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove apic_write_around from smpboot.c

We don't do workarounds for ancient hardware bugs.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Update defconfig
Andi Kleen [Mon, 12 Sep 2005 16:49:23 +0000 (18:49 +0200)]
[PATCH] x86-64: Update defconfig

Allow diskless booting.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86{-64}: Remove old hack that disabled mmconfig support on AMD systems.
Andi Kleen [Mon, 12 Sep 2005 16:49:23 +0000 (18:49 +0200)]
[PATCH] x86{-64}: Remove old hack that disabled mmconfig support on AMD systems.

Now that Greg implemented MCFG/_SEG support this shouldn't be needed
anymore

Cc: gregkh@suse.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] cpuset semaphore depth check optimize
Paul Jackson [Mon, 12 Sep 2005 11:30:30 +0000 (04:30 -0700)]
[PATCH] cpuset semaphore depth check optimize

Optimize the deadlock avoidance check on the global cpuset
semaphore cpuset_sem.  Instead of adding a depth counter to the
task struct of each task, rather just two words are enough, one
to store the depth and the other the current cpuset_sem holder.

Thanks to Nikita Danilov for the idea.

Signed-off-by: Paul Jackson <pj@sgi.com>
[ We may want to change this further, but at least it's now
  a totally internal decision to the cpusets code ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] crc16: remove w1 specific comments.
Evgeniy Polyakov [Mon, 12 Sep 2005 13:12:43 +0000 (17:12 +0400)]
[PATCH] crc16: remove w1 specific comments.

Remove w1 comments from crc16.h and move specific constants into
w1_ds2433.c where they are used.

Replace %d with %zd.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6
Linus Torvalds [Mon, 12 Sep 2005 15:33:53 +0000 (08:33 -0700)]
Merge /pub/scm/linux/kernel/git/paulus/ppc64-2.6

19 years agoMark ia64-specific MCA/INIT scheduler hooks as dangerous
Linus Torvalds [Mon, 12 Sep 2005 14:59:21 +0000 (07:59 -0700)]
Mark ia64-specific MCA/INIT scheduler hooks as dangerous

..and only enable them for ia64. The functions are only valid
when the whole system has been totally stopped and no scheduler
activity is ongoing on any CPU, and interrupts are globally
disabled.

In other words, they aren't useful for anything else. So make
sure that nobody can use them by mistake.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i386: Don't miss pending signals returning to user mode after signal processing
Roland McGrath [Sun, 11 Sep 2005 08:44:45 +0000 (01:44 -0700)]
[PATCH] i386: Don't miss pending signals returning to user mode after signal processing

Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Remove unused code
Anton Blanchard [Mon, 12 Sep 2005 03:19:51 +0000 (13:19 +1000)]
[PATCH] ppc64: Remove unused code

ppc64_attention_msg and ppc64_dump_msg are not used so remove them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Fix for missing start-cpu rtas token
Anton Blanchard [Mon, 12 Sep 2005 03:17:27 +0000 (13:17 +1000)]
[PATCH] ppc64: Fix for missing start-cpu rtas token

If the rtas start-cpu token doesnt exist then presume the cpu is already
spinning. If it isnt we will catch it later on when the cpu doesnt
respond.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: indent pci code
Anton Blanchard [Mon, 12 Sep 2005 03:14:26 +0000 (13:14 +1000)]
[PATCH] ppc64: indent pci code

Fix up some badly indented code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: xics cleanup
Anton Blanchard [Mon, 12 Sep 2005 03:12:11 +0000 (13:12 +1000)]
[PATCH] ppc64: xics cleanup

A few xics cleanups:

- Make some things static.
- Be more consistent with error printing - interrupts are unsigned,
  error values are signed.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Add ptrace data breakpoint support
Anton Blanchard [Sat, 10 Sep 2005 06:01:11 +0000 (16:01 +1000)]
[PATCH] ppc64: Add ptrace data breakpoint support

Add hardware data breakpoint support.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Add definitions for new PTRACE calls
Anton Blanchard [Sat, 10 Sep 2005 06:01:10 +0000 (16:01 +1000)]
[PATCH] ppc64: Add definitions for new PTRACE calls

- Add PTRACE_GET_DEBUGREG/PTRACE_SET_DEBUGREG. The definition is
  as follows:

/*
 * Get or set a debug register. The first 16 are DABR registers and the
 * second 16 are IABR registers.
 */
#define PTRACE_GET_DEBUGREG    25
#define PTRACE_SET_DEBUGREG    26

  DABR == data breakpoint and IABR = instruction breakpoint in IBM
  speak. We could split out the IABR into 2 more ptrace calls but I
  figured there was no need and 16 DABR registers should be more
  than enough (POWER4/POWER5 have one).

- Add 2 new SIGTRAP si_codes: TRAP_HWBKPT and TRAP_BRANCH. I couldnt
  find any standards on either of these so I copied what ia64 is
  doing. Again this might be better placed in
  include/asm-generic/siginfo.h

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Fix up some whitespace issues in ptrace32.c
Anton Blanchard [Sat, 10 Sep 2005 06:01:09 +0000 (16:01 +1000)]
[PATCH] ppc64: Fix up some whitespace issues in ptrace32.c

Fix up some whitespace issues in ptrace32.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: ptrace cleanups
Anton Blanchard [Sat, 10 Sep 2005 06:01:08 +0000 (16:01 +1000)]
[PATCH] ppc64: ptrace cleanups

- Remove the PPC_REG* defines
- Wrap some more stuff with ifdef __KERNEL__
- Add missing PT_TRAP, PT_DAR, PT_DSISR defines
- Add PTRACE_GETEVRREGS/PTRACE_SETEVRREGS, even though we dont use it on
  ppc64 we dont want to allocate them for something else.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Add PTRACE_{GET|SET}VRREGS
Robert Jennings [Sat, 10 Sep 2005 06:01:07 +0000 (16:01 +1000)]
[PATCH] ppc64: Add PTRACE_{GET|SET}VRREGS

The ptrace get and set methods for VMX/Altivec registers present in the
ppc tree were missing for ppc64.  This patch adds the 32-bit and
64-bit methods.  Updated with the suggestions from Anton following the lines
of his code snippet.

Added:
 - flush_altivec_to_thread calls as suggested by Anton
 - piecewise copy of structure to preserve 32-bit vrsave data as per
   Anton

(I consolidated the 32 and 64bit versions with 2 helper macros - Anton)

Signed-off-by: Robert C Jennings <rcjenn@austin.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years agoppc64: Set up PCI tree from Open Firmware device tree
Paul Mackerras [Mon, 12 Sep 2005 07:17:36 +0000 (17:17 +1000)]
ppc64: Set up PCI tree from Open Firmware device tree

This adds code which gives us the option on ppc64 of instantiating the
PCI tree (the tree of pci_bus and pci_dev structs) from the Open
Firmware device tree rather than by probing PCI configuration space.
The OF device tree has a node for each PCI device and bridge in the
system, with properties that tell us what addresses the firmware has
configured for them and other details.

There are a couple of reasons why this is needed.  First, on systems
with a hypervisor, there is a PCI-PCI bridge per slot under the PCI
host bridges.  These PCI-PCI bridges have special isolation features
for virtualization.  We can't write to their config space, and we are
not supposed to be reading their config space either.  The firmware
tells us about the address ranges that they pass in the OF device
tree.

Secondly, on powermacs, the interrupt controller is in a PCI device
that may be behind a PCI-PCI bridge.  If we happened to take an
interrupt just at the point when the device or a bridge on the path to
it was disabled for probing, we would crash when we try to access the
interrupt controller.

I have implemented a platform-specific function which is called for
each PCI bridge (host or PCI-PCI) to say whether the code should look
in the device tree or use normal PCI probing for the devices under
that bridge.  On pSeries machines we use the device tree if we're
running under a hypervisor, otherwise we use normal probing.  On
powermacs we use normal probing for the AGP bridge, since the device
for the AGP bridge itself isn't shown in the device tree (at least on
my G5), and the device tree for everything else.

This has been tested on a dual G5 powermac, a partition on a POWER5
machine (running under the hypervisor), and a legacy iSeries
partition.

Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] i810fb: Update i810fb documentation
Antonino A. Daplas [Mon, 12 Sep 2005 01:18:12 +0000 (09:18 +0800)]
[PATCH] i810fb: Update i810fb documentation

Update i810fb documentation to describe new features and configuration
changes.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i810fb: Change option ext_vga to extvga to match documentation
Antonino A. Daplas [Mon, 12 Sep 2005 01:16:47 +0000 (09:16 +0800)]
[PATCH] i810fb: Change option ext_vga to extvga to match documentation

Reported by: Manuel Lauss <mano@roarinelk.homelinux.net>

He was getting random initial video modes depending on the kernel
configuration.  His option line includes 'extvga'.

The i810fb documentation describes the option 'extvga', however the
driver accepts 'ext_vga'.  Besides 'extvga' being ignored by i810fb,
it also confuses the option parser of i810fb and assigns 'extvga' to
'mode_option'.  This leads to an incorrect video mode at boot time.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i810fb: Restore xres and yres option parameters
Antonino A. Daplas [Mon, 12 Sep 2005 01:15:16 +0000 (09:15 +0800)]
[PATCH] i810fb: Restore xres and yres option parameters

If i810fb successfully probed for the EDID, it will disregard the
boot option parameters 'xres' and 'yres'.  Fix this regression.

Excellent testing done by Manuel Lauss <mano@roarinelk.homelinux.net>.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i810fb: Fix oops if CONFIG_FB_I810_I2C is set to no
Antonino A. Daplas [Mon, 12 Sep 2005 01:13:32 +0000 (09:13 +0800)]
[PATCH] i810fb: Fix oops if CONFIG_FB_I810_I2C is set to no

Reported by: Manuel Lauss <mano@roarinelk.homelinux.net>

compiled with CONFIG_FB_I810_I2C = n and CONFIG_FB_I810 = y
it oopses at boot in file drivers/video/i810/i810_main.c:1884

...
Unable to handle kernel NULL pointer dereference at virtual address 00000054
printing eip:
c02543c0
*pde = 00000000
Oops: 0000 [#1]
last sysfs file:
Modules linked in:
CPU:    0
EIP:    0060:[<c02543c0>]    Not tainted VLI
EFLAGS: 00010286   (2.6.13-mm2)
EIP is at i810fb_find_init_mode+0x53/0x93
eax: c113ddd4   ebx: c1194000   ecx: c04be2dd   edx: c1194000
esi: c1194008   edi: c113ddd4   ebp: c1194240   esp: c113ddcc
ds: 007b   es: 007b   ss: 0068

struct fb_monspecs *specs is initialized to NULL causing the oops.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: common RAM based 68360 startup code
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: common RAM based 68360 startup code

Create common start code for all 68360 based platforms that are
loaded and run directly from RAM (as opposed to running from
flash/ROM). This replaces the old specific startup code for
each board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: allow for SDRAM and GPIO differences on 5270/1 and 5274/5 processors
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: allow for SDRAM and GPIO differences on 5270/1 and 5274/5 processors

Allow for differences in the SDRAM controller setup and GPIO pin setup
of the 5270/1 and 5274/5 parts. With separate config options for each
now this no longer needs to be board specific.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: FEC eth definitions support for the 523x Coldfire processor family
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: FEC eth definitions support for the 523x Coldfire processor family

Add support for the FEC ethernet driver of the Freescale 523x processor
family to the FEC header definitions.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: add SPI register definitions for 528x processors
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: add SPI register definitions for 528x processors

Add QSPI register definitions of ColdFIre 528x processor SPI controller.

Patch originally submitted by Derek Cheung <derek.cheung@sympatico.ca>

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uclinux: add NULL check, 0 end valid check and some more exports to nommu.c
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] uclinux: add NULL check, 0 end valid check and some more exports to nommu.c

Move call to get_mm_counter() in update_mem_hiwater() to be
inside the check for tsk->mm being null. Otherwise you can be
following a null pointer here. This patch submitted by
Javier Herrero <jherrero@hvsistemas.es>.

Modify the end check for munmap regions to allow for the
legacy behavior of 0 being valid. Pretty much all current
uClinux system libc malloc's pass in 0 as the end point.
A hard check will fail on these, so change the check so
that if it is non-zero it must be valid otherwise it fails.
A passed in value will always succeed (as it used too).

Also export a few more mm system functions - to be consistent
with the VM code exports.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: dma support for 523x processors
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: dma support for 523x processors

Support the DMA unit of the ColdFire 523x processor family.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uclinux: remove use of mtd_put_device() in uclinux MTD map driver
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] uclinux: remove use of mtd_put_device() in uclinux MTD map driver

We should not call mtd_put_device() in the uclinux MTD map driver.
Also consistently use phys/virt fields of maps map_info struct,
instead of mixing it with map_priv_1.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: add ColdFire serial driver support for 523x processor family
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: add ColdFire serial driver support for 523x processor family

Add support for the new Freescale 523x processor family to ColdFire
serial driver. Also set different default baud rate for MOD5272
board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: change addr arg to const in bitops.h/find_next_zero_bit()
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: change addr arg to const in bitops.h/find_next_zero_bit()

Change addr arg to find_next_zero_bit to be a const.
Cleans up compiler warning.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: correct prototype args in checksum.h
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: correct prototype args in checksum.h

Bring arg types for csum_partial_copy and csum_paritial_copy_from_user
prototypes into line with their actual implementation.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: common ROM/flash based 68360 startup code
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: common ROM/flash based 68360 startup code

Create common start code for all 68360 based platforms that are
loaded and run directly from ROM/flash (as opposed to running from
RAM). This replaces the old specific startup code for each board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: cache support for 523x/528x processors
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: cache support for 523x/528x processors

Add support for the cache of the ColdFIre 523x family of processors.
Enable the 528x cache by default now, all final shipping silicon
has the cache bug fixed.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: ColdFire FEC eth driver improvements
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: ColdFire FEC eth driver improvements

A few improvements to the Freescale/ColdFire FEC driver:

. some formatting cleanups
. add support for the FEC device in the ColdFire 523x processor family
. add support for MAC address setting on MOD5272 and M5272C3 boards
. don't re-read the PHY status register many times
. ack status interrupt before reading status register
. move printing init message to after full init (so that the
  ethX name is filled out for printing)

Some parts of this patch submitted by Philippe De Muyter <phdm@macqel.be>

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m68knommu: config support for FEC eth of 523x Coldfire processor family
Greg Ungerer [Mon, 12 Sep 2005 01:18:10 +0000 (11:18 +1000)]
[PATCH] m68knommu: config support for FEC eth of 523x Coldfire processor family

Add configuration support for the FEC ethernet controller in the
Freescale 523x processor family. Also add and option to configure
the second FEC controller on some Freescale processors.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Sun, 11 Sep 2005 22:51:40 +0000 (15:51 -0700)]
Merge branch 'release' of /linux/kernel/git/aegl/linux-2.6

19 years agoPull sn-features into release branch
Tony Luck [Sun, 11 Sep 2005 21:34:23 +0000 (14:34 -0700)]
Pull sn-features into release branch

19 years agoPull sim-fixes into release branch
Tony Luck [Sun, 11 Sep 2005 21:27:15 +0000 (14:27 -0700)]
Pull sim-fixes into release branch

19 years ago[IA64] MCA/INIT: remove obsolete unwind code
Keith Owens [Sun, 11 Sep 2005 07:24:42 +0000 (17:24 +1000)]
[IA64] MCA/INIT: remove obsolete unwind code

Delete the special case unwind code that was only used by the old
MCA/INIT handler.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[IA64] MCA/INIT: remove the physical mode path from minstate.h
Keith Owens [Sun, 11 Sep 2005 07:23:42 +0000 (17:23 +1000)]
[IA64] MCA/INIT: remove the physical mode path from minstate.h

Remove the physical mode path from minstate.h.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[PATCH] MCA/INIT: use per cpu stacks
Keith Owens [Sun, 11 Sep 2005 07:22:53 +0000 (17:22 +1000)]
[PATCH] MCA/INIT: use per cpu stacks

The bulk of the change.  Use per cpu MCA/INIT stacks.  Change the SAL
to OS state (sos) to be per process.  Do all the assembler work on the
MCA/INIT stacks, leaving the original stack alone.  Pass per cpu state
data to the C handlers for MCA and INIT, which also means changing the
mca_drv interfaces slightly.  Lots of verification on whether the
original stack is usable before converting it to a sleeping process.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[IA64] MCA/INIT: avoid reading INIT record during INIT event
Keith Owens [Sun, 11 Sep 2005 07:21:46 +0000 (17:21 +1000)]
[IA64] MCA/INIT: avoid reading INIT record during INIT event

Reading the INIT record from SAL during the INIT event has proved to be
unreliable, and a source of hangs during INIT processing.  The new
MCA/INIT handlers remove the need to get the INIT record from SAL.
Change salinfo.c so mca.c can just flag that a new record is available,
without having to read the record during INIT processing.  This patch
can be applied without the new MCA/INIT handlers.

Also clean up some usage of NR_CPUS which should have been using
cpu_online().

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[IA64] MCA/INIT: add an extra thread_info flag
Keith Owens [Sun, 11 Sep 2005 07:20:14 +0000 (17:20 +1000)]
[IA64] MCA/INIT: add an extra thread_info flag

Add an extra thread_info flag to indicate the special MCA/INIT stacks.
Mainly for debuggers.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[PATCH] MCA/INIT: scheduler hooks
Keith Owens [Sun, 11 Sep 2005 07:19:06 +0000 (17:19 +1000)]
[PATCH] MCA/INIT: scheduler hooks

Scheduler hooks to see/change which process is deemed to be on a cpu.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years agomips: rename offsets.c to asm-offsets.c
Sam Ravnborg [Sun, 11 Sep 2005 20:35:18 +0000 (22:35 +0200)]
mips: rename offsets.c to asm-offsets.c

Cannot build MIPS now.
We need to change offset.c to asm-offsets.c

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: fix silentoldconfig with make O=
Sam Ravnborg [Sun, 11 Sep 2005 20:32:57 +0000 (22:32 +0200)]
kbuild: fix silentoldconfig with make O=

Al Viro reported that sometimes silentoldconfig failed because
output directory was missing.
So create it unconditionally before executing conf

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: rename prepare to archprepare to fix dependency chain
Sam Ravnborg [Sun, 11 Sep 2005 20:30:22 +0000 (22:30 +0200)]
kbuild: rename prepare to archprepare to fix dependency chain

When introducing the generic asm-offsets.h support the dependency
chain for the prepare targets was changed. All build scripts expecting
include/asm/asm-offsets.h to be made when using the prepare target would broke.
With the limited number of prepare targets left in arch Makefiles
the trivial solution was to introduce a new arch specific target: archprepare

The dependency chain looks like this now:

prepare
  |
  +--> prepare0
         |
         +--> archprepare
                |
+--> scripts_basic
                +--> prepare1
                       |
                       +---> prepare2
                               |
                               +--> prepare3

So prepare 3 is processed before prepare2 etc.
This guaantees that the asm symlink, version.h, scripts_basic
are all updated before archprepare is processed.

prepare0 which build the asm-offsets.h file will need the
actions performed by archprepare.

The head target is now named prepare, because users scripts will most
likely use that target, but prepare-all has been kept for compatibility.
Updated Documentation/kbuild/makefiles.txt.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Sun, 11 Sep 2005 17:16:07 +0000 (10:16 -0700)]
Merge /pub/scm/linux/kernel/git/roland/infiniband

19 years agoMerge branch 'for-linus' from kernel.org:/.../shaggy/jfs-2.6 manually
Linus Torvalds [Sun, 11 Sep 2005 17:14:54 +0000 (10:14 -0700)]
Merge branch 'for-linus' from /.../shaggy/jfs-2.6 manually

Clash due to new delete_inode behavior (the filesystem now needs to do
the truncate_inode_pages() call itself).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Sun HME: enable and map PCI ROM properly
Willy Tarreau [Sun, 11 Sep 2005 07:04:07 +0000 (09:04 +0200)]
[PATCH] Sun HME: enable and map PCI ROM properly

This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used
the same PCI ROM mapping code).

Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE).
With it, I get the correct addresses (the ones printed on the label on
the card).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoSun GEM ethernet: enable and map PCI ROM properly
Linus Torvalds [Sun, 11 Sep 2005 16:26:20 +0000 (09:26 -0700)]
Sun GEM ethernet: enable and map PCI ROM properly

This same patch was reported to fix the MAC address detection on sunhme
(next patch).  Most people seem to be running this on Sparcs or PPC
machines, where we get the MAC address from their respective firmware
rather than from the (previously broken) ROM mapping routines.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agohpt366: write the full 4 bytes of ROM address, not just low 1 byte
Linus Torvalds [Sun, 11 Sep 2005 16:22:50 +0000 (09:22 -0700)]
hpt366: write the full 4 bytes of ROM address, not just low 1 byte

This is one heck of a confused driver.  It uses a byte write to a dword
register to enable a ROM resource that it doesn't even seem to be using.

"Lost and wandering in the desert of confusion"

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Sun, 11 Sep 2005 16:16:03 +0000 (09:16 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

19 years ago[MFD] Cleanups suggested by Dmitri, Vojtech and lists.
Pavel Machek [Sun, 11 Sep 2005 09:28:00 +0000 (10:28 +0100)]
[MFD] Cleanups suggested by Dmitri, Vojtech and lists.

These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri
and the lists.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[MFD] Add code UCB1200/UCB1300 assabet platform support
Russell King [Sun, 11 Sep 2005 09:27:23 +0000 (10:27 +0100)]
[MFD] Add code UCB1200/UCB1300 assabet platform support

Add support for Intel assabet specific board support for
UCB1200/UCB1300 devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[MFD] Add code UCB1200/UCB1300 touchscreen support
Russell King [Sun, 11 Sep 2005 09:26:57 +0000 (10:26 +0100)]
[MFD] Add code UCB1200/UCB1300 touchscreen support

Add support for Philips UCB1200 and UCB1300 touchscreen
interfaces found on ARM devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[MFD] Add code UCB1200/UCB1300 device support
Russell King [Sun, 11 Sep 2005 09:26:31 +0000 (10:26 +0100)]
[MFD] Add code UCB1200/UCB1300 device support

Add the core device support code for the Philips UCB1200 and
UCB1300 devices.  Also includes the following from Pavel:

This fixes u32 vs. pm_message_t confusion and uses cleaner
try_to_freeze() [fixing compilation as a side-effect on newer
kernels.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 11 Sep 2005 00:42:47 +0000 (17:42 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

19 years ago[PATCH] Fix breakage on ppc{,64} by "nvidiafb: Fallback to firmware EDID"
Alexey Dobriyan [Sun, 11 Sep 2005 00:01:09 +0000 (04:01 +0400)]
[PATCH] Fix breakage on ppc{,64} by "nvidiafb: Fallback to firmware EDID"

Fix

drivers/video/nvidia/nv_of.c:34: error: conflicting types for 'nvidia_probe_i2c_connector'
drivers/video/nvidia/nv_proto.h:38: error: previous declaration of 'nvidia_probe_i2c_connector' was here

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[TCP]: Fix double adjustment of tp->{lost,left}_out in tcp_fragment().
Herbert Xu [Sun, 11 Sep 2005 00:19:09 +0000 (17:19 -0700)]
[TCP]: Fix double adjustment of tp->{lost,left}_out in tcp_fragment().

There is an extra left_out/lost_out adjustment in tcp_fragment which
means that the lost_out accounting is always wrong.  This patch removes
that chunk of code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] uml spinlock breakage
Al Viro [Sat, 10 Sep 2005 23:24:27 +0000 (00:24 +0100)]
[PATCH] uml spinlock breakage

mingo missed that one...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 10 Sep 2005 22:54:41 +0000 (15:54 -0700)]
Merge /pub/scm/linux/kernel/git/dtor/input

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Sat, 10 Sep 2005 20:18:15 +0000 (13:18 -0700)]
Merge /pub/scm/linux/kernel/git/sam/kbuild

19 years agokbuild: fix generic asm-offsets.h support
Sam Ravnborg [Sat, 10 Sep 2005 19:05:36 +0000 (21:05 +0200)]
kbuild: fix generic asm-offsets.h support

iThis fixes a bug where the generated asm-offsets.h file was saved in
the source tree even with make O=.
Thanks to Stephen Rothwell <sfr@canb.auug.org.au> for the report.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: add objectify
Sam Ravnborg [Sat, 10 Sep 2005 19:02:11 +0000 (21:02 +0200)]
kbuild: add objectify

Use foo := $(call objectify, $(foo)) to prefix $(foo) with $(obj)/ unless
$(foo) is an absolute path.
For now no in-tree users - soon to come.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] uml: avoid already done dirtying
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:58 +0000 (19:44 +0200)]
[PATCH] uml: avoid already done dirtying

The PTE returned from handle_mm_fault is already marked as dirty and accessed
if needed.

Also, since this is not set with set_pte() (which sets NEWPAGE and NEWPROT as
needed), this wouldn't work anyway.

This version has been updated and fixed, thanks to some feedback from Jeff Dike.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix fault handler on write
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:57 +0000 (19:44 +0200)]
[PATCH] uml: fix fault handler on write

The UML fault handler was recently changed to enforce PROT_NONE protections,
by requiring VM_READ or VM_EXEC on VMA's.

However, by mistake, things were changed such that VM_READ is always checked,
also on write faults; so a VMA mapped with only PROT_WRITE is not readable
(unless it's prefaulted with MAP_POPULATE or with a write), which is different
from i386.

Discovered while testing remap_file_pages protection support.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: inline mk_pte and various friends
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:56 +0000 (19:44 +0200)]
[PATCH] uml: inline mk_pte and various friends

Turns out that, for UML, a *lot* of VM-related trivial functions are not
inlined but rather normal functions.

In other sections of UML code, this is justified by having files which
interact with the host and cannot therefore include kernel headers, but in
this case there's no such justification.

I've had to turn many of them to macros because of missing declarations. While
doing this, I've decided to reuse some already existing macros.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64 linker script cleanups for debug sections
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:55 +0000 (19:44 +0200)]
[PATCH] x86_64 linker script cleanups for debug sections

Use the new macros for x86_64 too.

Note that the current scripts includes different definitions; more exactly,
it only contains part of the DWARF2 sections and the .comment one from
Stabs. Shouldn't be a problem, anyway.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i386 / uml: add dwarf sections to static link script
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:54 +0000 (19:44 +0200)]
[PATCH] i386 / uml: add dwarf sections to static link script

Inside the linker script, insert the code for DWARF debug info sections. This
may help GDB'ing a Uml binary. Actually, it seems that ld is able to guess
what I added correctly, but normal linker scripts include this section so it
should be correct anyway adding it.

On request by Sam Ravnborg <sam@ravnborg.org>, I've added it to
asm-generic/vmlinux.lds.s. I've also moved there the stabs debug section,
used the new macro in i386 linker script and added DWARF debug section to
that.

In the truth, I've not been able to verify the difference in GDB behaviour
after this change (I've seen large improvements with another patch). This
may depend on my binutils version, older one may have worse defaults.

However, this section is present in normal linker script, so add it at
least for the sake of cleanness.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Uml: more cleaning
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:53 +0000 (19:44 +0200)]
[PATCH] Uml: more cleaning

We must remove even arch/um/os-Linux/util/mk_user_constants, which we don't do.
Also, Kconfig_arch must be listed only once, between CLEAN_FILES.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge davem@outer-richmond.davemloft.net:src/GIT/net-2.6/
David S. Miller [Sat, 10 Sep 2005 18:01:33 +0000 (11:01 -0700)]
Merge davem@outer-richmond.davemloft.net:src/GIT/net-2.6/

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Sat, 10 Sep 2005 17:17:13 +0000 (10:17 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 10 Sep 2005 17:16:47 +0000 (10:16 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years ago[PATCH] envctrl fixes
viro@ZenIV.linux.org.uk [Fri, 9 Sep 2005 21:09:08 +0000 (22:09 +0100)]
[PATCH] envctrl fixes

envctrl doesn't need unistd.h; moreover, since it declares errno static
gcc4 gets very unhappy about including unistd.h.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] __user annotations (scsi/ch)
viro@ZenIV.linux.org.uk [Fri, 9 Sep 2005 21:03:44 +0000 (22:03 +0100)]
[PATCH] __user annotations (scsi/ch)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] powerpc: Move include3 to arch/$(ARCH)/include
Stephen Rothwell [Sat, 10 Sep 2005 14:00:14 +0000 (00:00 +1000)]
[PATCH] powerpc: Move include3 to arch/$(ARCH)/include

This is less troublesome and makes more sense.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] cfq-iosched: reverse bad reference count fix
Jens Axboe [Sat, 10 Sep 2005 12:17:10 +0000 (14:17 +0200)]
[PATCH] cfq-iosched: reverse bad reference count fix

The reference count fix merged isn't fully bug free. It doesn't leak
now, but instead it crashes due to looking at freed memory. So for now,
lets reverse the change and I'll fix it for real next week.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: support hotplug cpu on powermacs
Paul Mackerras [Sat, 10 Sep 2005 11:13:13 +0000 (21:13 +1000)]
[PATCH] ppc32: support hotplug cpu on powermacs

This allows cpus to be off-lined on 32-bit SMP powermacs.  When a cpu
is off-lined, it is put into sleep mode with interrupts disabled.  It
can be on-lined again by asserting its soft-reset pin, which is
connected to a GPIO pin.

With this I can off-line the second cpu in my dual G4 powermac, which
means that I can then suspend the machine (the suspend/resume code
refuses to suspend if more than one cpu is online, and making it cope
with multiple cpus is surprisingly messy).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Kill init on unhandled synchronous signals
Paul Mackerras [Sat, 10 Sep 2005 11:13:11 +0000 (21:13 +1000)]
[PATCH] ppc32: Kill init on unhandled synchronous signals

This is a patch that I have had in my tree for ages.  If init causes
an exception that raises a signal, such as a SIGSEGV, SIGILL or
SIGFPE, and it hasn't registered a handler for it, we don't deliver
the signal, since init doesn't get any signals that it doesn't have a
handler for.  But that means that we just return to userland and
generate the same exception again immediately.  With this patch we
print a message and kill init in this situation.

This is very useful when you have a bug in the kernel that means that
init doesn't get as far as executing its first instruction. :)
Without this patch the system hangs when it gets to starting the
userland init; with it you at least get a message giving you a clue
about what has gone wrong.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] telephony: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:31 +0000 (00:27 -0700)]
[PATCH] telephony: fix-up schedule_timeout() usage

Use schedule_timeout_uninterruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] parport: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:31 +0000 (00:27 -0700)]
[PATCH] parport: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time to jiffies units conversion functions rather than direct HZ
division to avoid rounding issues.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] drivers/char: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:30 +0000 (00:27 -0700)]
[PATCH] drivers/char: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] drivers/cdrom: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:29 +0000 (00:27 -0700)]
[PATCH] drivers/cdrom: fix-up schedule_timeout() usage

Use schedule_timeout_{un,}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] drivers/block: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:28 +0000 (00:27 -0700)]
[PATCH] drivers/block: fix-up schedule_timeout() usage

Use schedule_timeout_{un,}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mips: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:27 +0000 (00:27 -0700)]
[PATCH] mips: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also, replace
custom timespectojiffies() function with globally availabe
timespec_to_jiffies().

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i386: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:26 +0000 (00:27 -0700)]
[PATCH] i386: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] alpha: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:25 +0000 (00:27 -0700)]
[PATCH] alpha: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mm: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:25 +0000 (00:27 -0700)]
[PATCH] mm: fix-up schedule_timeout() usage

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] kernel: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:24 +0000 (00:27 -0700)]
[PATCH] kernel: fix-up schedule_timeout() usage

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] fs: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:23 +0000 (00:27 -0700)]
[PATCH] fs: fix-up schedule_timeout() usage

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use helper
functions to convert between human time units and jiffies rather than constant
HZ division to avoid rounding errors.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] time.h: remove ifdefs
Andrew Morton [Sat, 10 Sep 2005 07:27:23 +0000 (00:27 -0700)]
[PATCH] time.h: remove ifdefs

Remove these ifdefs - there's no need to have more than one definition of
these multipliers anywhere.

Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>