qed: Fix mask for physical address in ILT entry

[ Upstream commit fdd13dd350dda1826579eb5c333d76b14513b812 ]

ILT entry requires 12 bit right shifted physical address.
Existing mask for ILT entry of physical address i.e.
ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit
address because upper 8 bits of 64 bit address were getting
masked which resulted in completer abort error on
PCIe bus due to invalid address.

Fix that mask to handle 64bit physical address.

Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: fix reserve calculation

[ Upstream commit 9aad13b087ab0a588cd68259de618f100053360e ]

Commit b84bbaf7a6c8 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.

This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.

The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.

Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.

Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation")
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: cdc_mbim: add flag FLAG_SEND_ZLP

[ Upstream commit 9f7c728332e8966084242fcd951aa46583bc308c ]

Testing Telit LM940 with ICMP packets > 14552 bytes revealed that
the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc
mbim data interface won't be anymore responsive.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: broadcom: Fix bcm_write_exp()

[ Upstream commit 79fb218d97980d4fee9a64f4c8ff05289364ba25 ]

On newer PHYs, we need to select the expansion register to write with
setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior
to being migrated to generic code under bcm-phy-lib.c which
unfortunately used the older implementation from the BCM54xx days.

Fix this by creating an inline stub: bcm_write_exp_sel() which adds the
correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY
and BCM7xxx PHY drivers which require setting these bits.

broadcom.c is unchanged because some PHYs even use a different selector
method, so let them specify it directly (e.g: SerDes secondary selector).

Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/packet: refine check for priv area size

[ Upstream commit eb73190f4fbeedf762394e92d6a4ec9ace684c88 ]

syzbot was able to trick af_packet again [1]

Various commits tried to address the problem in the past,
but failed to take into account V3 header size.

[1]

tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96
BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106

CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436
 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
 prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline]
 packet_current_rx_frame net/packet/af_packet.c:1117 [inline]
 tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282
 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018
 xmit_one net/core/dev.c:3049 [inline]
 dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069
 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617
 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:277 [inline]
 ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491
 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633
 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the page:
page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80
raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2b6867c2ce76 ("net/packet: fix overflow in check for priv area size")
Fixes: dc808110bb62 ("packet: handle too big packets for PACKET_V3")
Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: metrics: add proper netlink validation

[ Upstream commit 5b5e7a0de2bbf2a1afcd9f49e940010e9fb80d53 ]

Before using nla_get_u32(), better make sure the attribute
is of the proper size.

Code recently was changed, but bug has been there from beginning
of git.

BUG: KMSAN: uninit-value in rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
CPU: 1 PID: 14139 Comm: syz-executor6 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
 __msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
 rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
 fib_dump_info+0xc42/0x2190 net/ipv4/fib_semantics.c:1361
 rtmsg_fib+0x65f/0x8c0 net/ipv4/fib_semantics.c:419
 fib_table_insert+0x2314/0x2b50 net/ipv4/fib_trie.c:1287
 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:00007faae5fd8c68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007faae5fd96d4 RCX: 0000000000455a09
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000005d0 R14: 00000000006fdc20 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:529
 fib_convert_metrics net/ipv4/fib_semantics.c:1056 [inline]
 fib_create_info+0x2d46/0x9dc0 net/ipv4/fib_semantics.c:1150
 fib_table_insert+0x3e4/0x2b50 net/ipv4/fib_trie.c:1146
 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2753 [inline]
 __kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:988 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
 netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: a919525ad832 ("net: Move fib_convert_metrics to metrics file")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy

[ Upstream commit 2eabd764cb5512f1338d06ffc054c8bc9fbe9104 ]

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netdev-FAQ: clarify DaveM's position for stable backports

[ Upstream commit 75d4e704fa8d2cf33ff295e5b441317603d7f9fd ]

Per discussion with David at netconf 2018, let's clarify
DaveM's position of handling stable backports in netdev-FAQ.

This is important for people relying on upstream -stable
releases.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcm: Fix use-after-free caused by clonned sockets

[ Upstream commit eb7f54b90bd8f469834c5e86dcf72ebf9a629811 ]

(resend for properly queueing in patchwork)

kcm_clone() creates kernel socket, which does not take net counter.
Thus, the net may die before the socket is completely destructed,
i.e. kcm_exit_net() is executed before kcm_done().

Reported-by: syzbot+5f1a04e374a635efc426@syzkaller.appspotmail.com
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isdn: eicon: fix a missing-check bug

[ Upstream commit 6009d1fe6ba3bb2dab55921da60465329cc1cd89 ]

In divasmain.c, the function divas_write() firstly invokes the function
diva_xdi_open_adapter() to open the adapter that matches with the adapter
number provided by the user, and then invokes the function diva_xdi_write()
to perform the write operation using the matched adapter. The two functions
diva_xdi_open_adapter() and diva_xdi_write() are located in diva.c.

In diva_xdi_open_adapter(), the user command is copied to the object 'msg'
from the userspace pointer 'src' through the function pointer 'cp_fn',
which eventually calls copy_from_user() to do the copy. Then, the adapter
number 'msg.adapter' is used to find out a matched adapter from the
'adapter_queue'. A matched adapter will be returned if it is found.
Otherwise, NULL is returned to indicate the failure of the verification on
the adapter number.

As mentioned above, if a matched adapter is returned, the function
diva_xdi_write() is invoked to perform the write operation. In this
function, the user command is copied once again from the userspace pointer
'src', which is the same as the 'src' pointer in diva_xdi_open_adapter() as
both of them are from the 'buf' pointer in divas_write(). Similarly, the
copy is achieved through the function pointer 'cp_fn', which finally calls
copy_from_user(). After the successful copy, the corresponding command
processing handler of the matched adapter is invoked to perform the write
operation.

It is obvious that there are two copies here from userspace, one is in
diva_xdi_open_adapter(), and one is in diva_xdi_write(). Plus, both of
these two copies share the same source userspace pointer, i.e., the 'buf'
pointer in divas_write(). Given that a malicious userspace process can race
to change the content pointed by the 'buf' pointer, this can pose potential
security issues. For example, in the first copy, the user provides a valid
adapter number to pass the verification process and a valid adapter can be
found. Then the user can modify the adapter number to an invalid number.
This way, the user can bypass the verification process of the adapter
number and inject inconsistent data.

This patch reuses the data copied in
diva_xdi_open_adapter() and passes it to diva_xdi_write(). This way, the
above issues can be avoided.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: omit traffic class when calculating flow hash

[ Upstream commit fa1be7e01ea863e911349e30456706749518eeab ]

Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also inconsistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.

Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().

Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes: f70ea018da06 ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: remove warning in ip_recv_error

[ Upstream commit 730c54d59403658a62af6517338fa8d4922c1b28 ]

A precondition check in ip_recv_error triggered on an otherwise benign
race. Remove the warning.

The warning triggers when passing an ipv6 socket to this ipv4 error
handling function. RaceFuzzer was able to trigger it due to a race
in setsockopt IPV6_ADDRFORM.

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_socket->ops = &inet_dgram_ops;

  ---
  CPU1
    sk->sk_prot->recvmsg
      udp_recvmsg
        ip_recv_error
          WARN_ON_ONCE(sk->sk_family == AF_INET6);

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_family = PF_INET;

This socket option converts a v6 socket that is connected to a v4 peer
to an v4 socket. It updates the socket on the fly, changing fields in
sk as well as other structs. This is inherently non-atomic. It races
with the lockless udp_recvmsg path.

No other code makes an assumption that these fields are updated
atomically. It is benign here, too, as ip_recv_error cares only about
the protocol of the skbs enqueued on the error queue, for which
sk_family is not a precise predictor (thanks to another isue with
IPV6_ADDRFORM).

Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr
Fixes: 7ce875e5ecb8 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error")
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmr: properly check rhltable_init() return value

[ Upstream commit 66fb33254f45df4b049f487aff1cbde1ef919390 ]

commit 8fb472c09b9d ("ipmr: improve hash scalability")
added a call to rhltable_init() without checking its return value.

This problem was then later copied to IPv6 and factorized in commit
0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table")

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 31552 Comm: syz-executor7 Not tainted 4.17.0-rc5+ #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rht_key_hashfn include/linux/rhashtable.h:277 [inline]
RIP: 0010:__rhashtable_lookup include/linux/rhashtable.h:630 [inline]
RIP: 0010:rhltable_lookup include/linux/rhashtable.h:716 [inline]
RIP: 0010:mr_mfc_find_parent+0x2ad/0xbb0 net/ipv4/ipmr_base.c:63
RSP: 0018:ffff8801826aef70 EFLAGS: 00010203
RAX: 0000000000000001 RBX: 0000000000000001 RCX: ffffc90001ea0000
RDX: 0000000000000079 RSI: ffffffff8661e859 RDI: 000000000000000c
RBP: ffff8801826af1c0 R08: ffff8801b2212000 R09: ffffed003b5e46c2
R10: ffffed003b5e46c2 R11: ffff8801daf23613 R12: dffffc0000000000
R13: ffff8801826af198 R14: ffff8801cf8225c0 R15: ffff8801826af658
FS:  00007ff7fa732700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000003ffffff9c CR3: 00000001b0210000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ip6mr_cache_find_parent net/ipv6/ip6mr.c:981 [inline]
 ip6mr_mfc_delete+0x1fe/0x6b0 net/ipv6/ip6mr.c:1221
 ip6_mroute_setsockopt+0x15c6/0x1d70 net/ipv6/ip6mr.c:1698
 do_ipv6_setsockopt.isra.9+0x422/0x4660 net/ipv6/ipv6_sockglue.c:163
 ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:922
 rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1060
 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039
 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
 __do_sys_setsockopt net/socket.c:1914 [inline]
 __se_sys_setsockopt net/socket.c:1911 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 8fb472c09b9d ("ipmr: improve hash scalability")
Fixes: 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Yuval Mintz <yuvalm@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: remove magic mtu value 0xFFF8

[ Upstream commit f7ff1fde9441b4fcc8ffb6e66e6e5a00d008937e ]

I don't know where this value comes from (probably a copy and paste and
paste and paste ...).
Let's use standard values which are a bit greater.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds

[ Upstream commit 848235edb5c93ed086700584c8ff64f6d7fc778d ]

Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during
ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same
setsockopt will fail with -ENOENT, since we haven't actually created
that table.

A similar fix for ipv4 was included in commit 5e1859fbcc3c ("ipv4: ipmr:
various fixes and cleanups").

Fixes: d1db275dd3f6 ("ipv6: ip6mr: support multiple tables")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: set DMA mask to 47 bit

[ Upstream commit 322eaa06d55ebc1402a4a8d140945cff536638b4 ]

In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then
failover to DMA") DMA mask was changed from 40 bits to 64 bits.
Hardware actually supports only 47 bits.

Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: don't free ccid2_hc_tx_sock struct in dccp_disconnect()

[ Upstream commit 2677d20677314101293e6da0094ede7b5526d2b1 ]

Syzbot reported the use-after-free in timer_is_static_object() [1].

This can happen because the structure for the rto timer (ccid2_hc_tx_sock)
is removed in dccp_disconnect(), and ccid2_hc_tx_rto_expire() can be
called after that.

The report [1] is similar to the one in commit 120e9dabaf55 ("dccp:
defer ccid_hc_tx_delete() at dismantle time"). And the fix is the same,
delay freeing ccid2_hc_tx_sock structure, so that it is freed in
dccp_sk_destruct().

[1]

==================================================================
BUG: KASAN: use-after-free in timer_is_static_object+0x80/0x90
kernel/time/timer.c:607
Read of size 8 at addr ffff8801bebb5118 by task syz-executor2/25299

CPU: 1 PID: 25299 Comm: syz-executor2 Not tainted 4.17.0-rc5+ #54
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  <IRQ>
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  timer_is_static_object+0x80/0x90 kernel/time/timer.c:607
  debug_object_activate+0x2d9/0x670 lib/debugobjects.c:508
  debug_timer_activate kernel/time/timer.c:709 [inline]
  debug_activate kernel/time/timer.c:764 [inline]
  __mod_timer kernel/time/timer.c:1041 [inline]
  mod_timer+0x4d3/0x13b0 kernel/time/timer.c:1102
  sk_reset_timer+0x22/0x60 net/core/sock.c:2742
  ccid2_hc_tx_rto_expire+0x587/0x680 net/dccp/ccids/ccid2.c:147
  call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
  expire_timers kernel/time/timer.c:1363 [inline]
  __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
  run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
  invoke_softirq kernel/softirq.c:365 [inline]
  irq_exit+0x1d1/0x200 kernel/softirq.c:405
  exiting_irq arch/x86/include/asm/apic.h:525 [inline]
  smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
  apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
  </IRQ>
...
Allocated by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
  kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
  ccid_new+0x25b/0x3e0 net/dccp/ccid.c:151
  dccp_hdlr_ccid+0x27/0x150 net/dccp/feat.c:44
  __dccp_feat_activate+0x184/0x270 net/dccp/feat.c:344
  dccp_feat_activate_values+0x3a7/0x819 net/dccp/feat.c:1538
  dccp_create_openreq_child+0x472/0x610 net/dccp/minisocks.c:128
  dccp_v4_request_recv_sock+0x12c/0xca0 net/dccp/ipv4.c:408
  dccp_v6_request_recv_sock+0x125d/0x1f10 net/dccp/ipv6.c:415
  dccp_check_req+0x455/0x6a0 net/dccp/minisocks.c:197
  dccp_v4_rcv+0x7b8/0x1f3f net/dccp/ipv4.c:841
  ip_local_deliver_finish+0x2e3/0xd80 net/ipv4/ip_input.c:215
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_local_deliver+0x1e1/0x720 net/ipv4/ip_input.c:256
  dst_input include/net/dst.h:450 [inline]
  ip_rcv_finish+0x81b/0x2200 net/ipv4/ip_input.c:396
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_rcv+0xb70/0x143d net/ipv4/ip_input.c:492
  __netif_receive_skb_core+0x26f5/0x3630 net/core/dev.c:4592
  __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4657
  process_backlog+0x219/0x760 net/core/dev.c:5337
  napi_poll net/core/dev.c:5735 [inline]
  net_rx_action+0x7b7/0x1930 net/core/dev.c:5801
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285

Freed by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
  ccid_hc_tx_delete+0xc3/0x100 net/dccp/ccid.c:190
  dccp_disconnect+0x130/0xc66 net/dccp/proto.c:286
  dccp_close+0x3bc/0xe60 net/dccp/proto.c:1045
  inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
  inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
  sock_release+0x96/0x1b0 net/socket.c:594
  sock_close+0x16/0x20 net/socket.c:1149
  __fput+0x34d/0x890 fs/file_table.c:209
  ____fput+0x15/0x20 fs/file_table.c:243
  task_work_run+0x1e4/0x290 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:191 [inline]
  exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166
  prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
  do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801bebb4cc0
  which belongs to the cache ccid2_hc_tx_sock of size 1240
The buggy address is located 1112 bytes inside of
  1240-byte region [ffff8801bebb4cc0, ffff8801bebb5198)
The buggy address belongs to the page:
page:ffffea0006faed00 count:1 mapcount:0 mapping:ffff8801bebb41c0
index:0xffff8801bebb5240 compound_mapcount: 0
flags: 0x2fffc0000008100(slab|head)
raw: 02fffc0000008100 ffff8801bebb41c0 ffff8801bebb5240 0000000100000003
raw: ffff8801cdba3138 ffffea0007634120 ffff8801cdbaab40 0000000000000000
page dumped because: kasan: bad access detected
...
==================================================================

Reported-by: syzbot+5d47e9ec91a6f15dbd6f@syzkaller.appspotmail.com
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: use the right constant

[ Upstream commit dd612f18a49b63af8b3a5f572d999bdb197385bc ]

Nearby code that also tests port suggests that the P0 constant should be
used when port is zero.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1;
@@

* e ? e1 : e1
// </smpl>

Fixes: 6c3218c6f7e5 ("bnx2x: Adjust ETS to 578xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

be2net: Fix error detection logic for BE3

[ Upstream commit d2c2725c2cdbcc108a191f50953d31c7b6556761 ]

Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0)
in be_detect_error() to know whether the error is valid error or not

Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3")
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kconfig: Avoid format overflow warning from GCC 8.1

commit 2ae89c7a82ea9d81a19b4fc2df23bef4b112f24e upstream.

In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
  sprintf(newname, "%s%s", dirname, basename);
                      ^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
  sprintf(newname, "%s%s", dirname, basename);
                   ^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
  sprintf(newname, "%s%s", dirname, basename);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
                       ^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Increase the size of tmpname and newname to make GCC happy.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: define SUPER_FLAG_METADUMP_V2

commit e2731e55884f2138a252b0a3d7b24d57e49c3c59 upstream.

btrfs-progs uses super flag bit BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34).
So just define that in kernel so that we know its been used.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmap: relax file size limit for regular files

commit 423913ad4ae5b3e8fb8983f70969fb522261ba26 upstream.

Commit be83bbf80682 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong.  In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.

It turns out that the "s_maxbytes" limit was less "known good" than I
thought.  In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore.  As a result, that file got limited to the
default MAX_INT s_maxbytes value.

This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.

Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage.  So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else.  It wasn't the regular file case I was worried
about.

I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.

Fixes: be83bbf80682 ("mmap: introduce sane default mmap limits")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmap: introduce sane default mmap limits

commit be83bbf806822b1b89e0a0f23cd87cddc409e429 upstream.

The internal VM "mmap()" interfaces are based on the mmap target doing
everything using page indexes rather than byte offsets, because
traditionally (ie 32-bit) we had the situation that the byte offset
didn't fit in a register.  So while the mmap virtual address was limited
by the word size of the architecture, the backing store was not.

So we're basically passing "pgoff" around as a page index, in order to
be able to describe backing store locations that are much bigger than
the word size (think files larger than 4GB etc).

But while this all makes a ton of sense conceptually, we've been dogged
by various drivers that don't really understand this, and internally
work with byte offsets, and then try to work with the page index by
turning it into a byte offset with "pgoff << PAGE_SHIFT".

Which obviously can overflow.

Adding the size of the mapping to it to get the byte offset of the end
of the backing store just exacerbates the problem, and if you then use
this overflow-prone value to check various limits of your device driver
mmap capability, you're just setting yourself up for problems.

The correct thing for drivers to do is to do their limit math in page
indices, the way the interface is designed.  Because the generic mmap
code _does_ test that the index doesn't overflow, since that's what the
mmap code really cares about.

HOWEVER.

Finding and fixing various random drivers is a sisyphean task, so let's
just see if we can just make the core mmap() code do the limiting for
us.  Realistically, the only "big" backing stores we need to care about
are regular files and block devices, both of which are known to do this
properly, and which have nice well-defined limits for how much data they
can access.

So let's special-case just those two known cases, and then limit other
random mmap users to a backing store that still fits in "unsigned long".
Realistically, that's not much of a limit at all on 64-bit, and on
32-bit architectures the only worry might be the GPU drivers, which can
have big physical address spaces.

To make it possible for drivers like that to say that they are 64-bit
clean, this patch does repurpose the "FMODE_UNSIGNED_OFFSET" bit in the
file flags to allow drivers to mark their file descriptors as safe in
the full 64-bit mmap address space.

[ The timing for doing this is less than optimal, and this should really
  go in a merge window. But realistically, this needs wide testing more
  than it needs anything else, and being main-line is the only way to do
  that.

  So the earlier the better, even if it's outside the proper development
  cycle        - Linus ]

Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd_zbc: Avoid that resetting a zone fails sporadically

commit ccce20fc7968d546fb1e8e147bf5cdc8afc4278a upstream.

Since SCSI scanning occurs asynchronously, since sd_revalidate_disk() is
called from sd_probe_async() and since sd_revalidate_disk() calls
sd_zbc_read_zones() it can happen that sd_zbc_read_zones() is called
concurrently with blkdev_report_zones() and/or blkdev_reset_zones().  That can
cause these functions to fail with -EIO because sd_zbc_read_zones() e.g. sets
q->nr_zones to zero before restoring it to the actual value, even if no drive
characteristics have changed.  Avoid that this can happen by making the
following changes:

- Protect the code that updates zone information with blk_queue_enter()
  and blk_queue_exit().
- Modify sd_zbc_setup_seq_zones_bitmap() and sd_zbc_setup() such that
  these functions do not modify struct scsi_disk before all zone
  information has been obtained.

Note: since commit 055f6e18e08f ("block: Make q_usage_counter also track
legacy requests"; kernel v4.15) the request queue freezing mechanism also
affects legacy request queues.

Fixes: 89d947561077 ("sd: Implement support for ZBC devices")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # v4.16
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd_zbc: Fix potential memory leak

commit 4b433924b2755a94f99258c178684a0e05c344de upstream.

Rework sd_zbc_check_zone_size() to avoid a memory leak due to an early
return if sd_zbc_report_zones() fails.

Reported-by: David.butterfield <david.butterfield@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.48

powerpc/mm/slice: Fix hugepage allocation at hint address on 8xx

commit aa0ab02ba992eb956934b21373e0138211486ddd upstream.

On the 8xx, the page size is set in the PMD entry and applies to
all pages of the page table pointed by the said PMD entry.

When an app has some regular pages allocated (e.g. see below) and tries
to mmap() a huge page at a hint address covered by the same PMD entry,
the kernel accepts the hint allthough the 8xx cannot handle different
page sizes in the same PMD entry.

10000000-10001000 r-xp 00000000 00:0f 2597 /root/malloc
10010000-10011000 rwxp 00000000 00:0f 2597 /root/malloc

mmap(0x10080000, 524288, PROT_READ|PROT_WRITE,
     MAP_PRIVATE|MAP_ANONYMOUS|0x40000, -1, 0) = 0x10080000

This results the app remaining forever in do_page_fault()/hugetlb_fault()
and when interrupting that app, we get the following warning:

[162980.035629] WARNING: CPU: 0 PID: 2777 at arch/powerpc/mm/hugetlbpage.c:354 hugetlb_free_pgd_range+0xc8/0x1e4
[162980.035699] CPU: 0 PID: 2777 Comm: malloc Tainted: G W       4.14.6 #85
[162980.035744] task: c67e2c00 task.stack: c668e000
[162980.035783] NIP:  c000fe18 LR: c00e1eec CTR: c00f90c0
[162980.035830] REGS: c668fc20 TRAP: 0700   Tainted: G W        (4.14.6)
[162980.035854] MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 24044224 XER: 20000000
[162980.036003]
[162980.036003] GPR00: c00e1eec c668fcd0 c67e2c00 00000010 c6869410 10080000 00000000 77fb4000
[162980.036003] GPR08: ffff0001 0683c001 00000000 ffffff80 44028228 10018a34 00004008 418004fc
[162980.036003] GPR16: c668e000 00040100 c668e000 c06c0000 c668fe78 c668e000 c6835ba0 c668fd48
[162980.036003] GPR24: 00000000 73ffffff 74000000 00000001 77fb4000 100fffff 10100000 10100000
[162980.036743] NIP [c000fe18] hugetlb_free_pgd_range+0xc8/0x1e4
[162980.036839] LR [c00e1eec] free_pgtables+0x12c/0x150
[162980.036861] Call Trace:
[162980.036939] [c668fcd0] [c00f0774] unlink_anon_vmas+0x1c4/0x214 (unreliable)
[162980.037040] [c668fd10] [c00e1eec] free_pgtables+0x12c/0x150
[162980.037118] [c668fd40] [c00eabac] exit_mmap+0xe8/0x1b4
[162980.037210] [c668fda0] [c0019710] mmput.part.9+0x20/0xd8
[162980.037301] [c668fdb0] [c001ecb0] do_exit+0x1f0/0x93c
[162980.037386] [c668fe00] [c001f478] do_group_exit+0x40/0xcc
[162980.037479] [c668fe10] [c002a76c] get_signal+0x47c/0x614
[162980.037570] [c668fe70] [c0007840] do_signal+0x54/0x244
[162980.037654] [c668ff30] [c0007ae8] do_notify_resume+0x34/0x88
[162980.037744] [c668ff40] [c000dae8] do_user_signal+0x74/0xc4
[162980.037781] Instruction dump:
[162980.037821] 7fdff378 81370000 54a3463a 80890020 7d24182e 7c841a14 712a0004 4082ff94
[162980.038014] 2f890000 419e0010 712a0ff0 408200e0 <0fe00000> 54a9000a 7f984840 419d0094
[162980.038216] ---[ end trace c0ceeca8e7a5800a ]---
[162980.038754] BUG: non-zero nr_ptes on freeing mm: 1
[162985.363322] BUG: non-zero nr_ptes on freeing mm: -1

In order to fix this, this patch uses the address space "slices"
implemented for BOOK3S/64 and enhanced to support PPC32 by the
preceding patch.

This patch modifies the context.id on the 8xx to be in the range
[1:16] instead of [0:15] in order to identify context.id == 0 as
not initialised contexts as done on BOOK3S

This patch activates CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE is
selected for the 8xx

Alltough we could in theory have as many slices as PMD entries, the
current slices implementation limits the number of low slices to 16.
This limitation is not preventing us to fix the initial issue allthough
it is suboptimal. It will be cured in a subsequent patch.

Fixes: 4b91428699477 ("powerpc/8xx: Implement support of hugepages")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm/slice: Enhance for supporting PPC32

commit db3a528db41caaa6dfd4c64e9f5efb1c81a80467 upstream.

In preparation for the following patch which will fix an issue on
the 8xx by re-using the 'slices', this patch enhances the
'slices' implementation to support 32 bits CPUs.

On PPC32, the address space is limited to 4Gbytes, hence only the low
slices will be used.

The high slices use bitmaps. As bitmap functions are not prepared to
handle bitmaps of size 0, this patch ensures that bitmap functions
are called only when SLICE_NUM_HIGH is not nul.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm/slice: create header files dedicated to slices

commit a3286f05bc5a5bc7fc73a9783ec89de78fcd07f8 upstream.

In preparation for the following patch which will enhance 'slices'
for supporting PPC32 in order to fix an issue on hugepages on 8xx,
this patch takes out of page*.h all bits related to 'slices' and put
them into newly created slice.h header files.
While common parts go into asm/slice.h, subarch specific
parts go into respective books3s/64/slice.c and nohash/64/slice.c
'slices'

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm/slice: Remove intermediate bitmap copy

commit 326691ad4f179e6edc7eb1271e618dd673e4736d upstream.

bitmap_or() and bitmap_andnot() can work properly with dst identical
to src1 or src2. There is no need of an intermediate result bitmap
that is copied back to dst in a second step.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Disable LVDS on Radiant P845

commit b3fb22733ae61050f8d10a1d6a8af176c5c5db1a upstream.

Radiant P845 does not have LVDS, only VGA.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org
(cherry picked from commit 7f7105f99b75aca4f8c2a748ed6b82c7f8be3293)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/lvds: Move acpi lid notification registration to registration phase

commit b9eb9c92899a509fe258d38dd6c214b1de69eee0 upstream.

Delay registering ourselves with the acpi lid notification mechanism
until we are registering the connectors after initialisation is
complete. This prevents a possibility of trying to handle the lid
notification before we are ready with the danger of chasing
uninitialised function pointers.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 IP:           (null)
 PGD 0 P4D 0
 Oops: 0010 [#1] PREEMPT SMP PTI
 Modules linked in: arc4(+) iwldvm(+) i915(+) mac80211 i2c_algo_bit coretemp mei_wdt iwlwifi drm_kms_helper kvm_intel wmi_bmof iTCO_wdt iTCO_vendor_support kvm snd_hda_codec_conexant snd_hda_codec_generic drm psmouse cfg80211 irqbypass input_leds pcspkr i2c_i801 snd_hda_intel snd_hda_codec thinkpad_acpi snd_hda_core mei_me lpc_ich snd_hwdep e1000e wmi nvram snd_pcm mei snd_timer shpchp ptp pps_core rfkill syscopyarea snd intel_agp sysfillrect intel_gtt soundcore sysimgblt battery led_class fb_sys_fops ac rtc_cmos agpgart evdev mac_hid acpi_cpufreq ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto crypto_simd glue_helper cryptd aes_x86_64 xts algif_skcipher af_alg dm_crypt dm_mod sd_mod uas usb_storage serio_raw atkbd libps2 ahci libahci uhci_hcd libata scsi_mod ehci_pci
  ehci_hcd usbcore usb_common i8042 serio
 CPU: 1 PID: 378 Comm: systemd-logind Not tainted 4.16.8-1-ARCH #1
 Hardware name: LENOVO 7454CTO/7454CTO, BIOS 6DET72WW (3.22 ) 10/25/2012
 RIP: 0010:          (null)
 RSP: 0018:ffffaf4580c33a18 EFLAGS: 00010287
 RAX: 0000000000000000 RBX: ffff947533558000 RCX: 000000000000003e
 RDX: ffffffffc0aa80c0 RSI: ffffaf4580c33a3c RDI: ffff947534e4c000
 RBP: ffff947533558338 R08: ffff947534598930 R09: ffffffffc0a928b1
 R10: ffffd8f181d5fd40 R11: 0000000000000000 R12: ffffffffc0a928b1
 R13: ffff947533558368 R14: ffffffffc0a928a9 R15: ffff947534e4c000
 FS:  00007f3dc4ddb940(0000) GS:ffff947539280000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000006e214000 CR4: 00000000000406e0
 Call Trace:
  ?  intel_modeset_setup_hw_state+0x385/0xf60 [i915]
  ? __intel_display_resume+0x1e/0xc0 [i915]
  ? intel_display_resume+0xcc/0x120 [i915]
  ? intel_lid_notify+0xbc/0xc0 [i915]
  ? notifier_call_chain+0x47/0x70
  ? blocking_notifier_call_chain+0x3e/0x60
  ? acpi_lid_notify_state+0x8f/0x1d0
  ? acpi_lid_update_state+0x49/0x70
  ? acpi_lid_input_open+0x60/0x90
  ? input_open_device+0x5d/0xa0
  ? evdev_open+0x1ba/0x1e0 [evdev]
  ? chrdev_open+0xa3/0x1b0
  ? cdev_put.part.0+0x20/0x20
  ? do_dentry_open+0x14c/0x300
  ? path_openat+0x30c/0x1240
  ? current_time+0x16/0x60
  ? do_filp_open+0x93/0x100
  ? __check_object_size+0xfb/0x180
  ? do_sys_open+0x186/0x210
  ? do_syscall_64+0x74/0x190
  ?  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 Code:  Bad RIP value.
 RIP:           (null) RSP: ffffaf4580c33a18
 CR2: 0000000000000000

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106559
Fixes: c1c7af608920 ("drm/i915: force mode set at lid open time")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518074840.16194-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit e578a570dc7c20475774d1ff993825e3bd7a7011)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/psr: Fix missed entry in PSR setup time table.

commit bdcc02cf1bb508fc700df7662f55058f651f2621 upstream.

Entry corresponding to 220 us setup time was missing. I am not aware of
any specific bug this fixes, but this could potentially result in enabling
PSR on a panel with a higher setup time requirement than supported by the
hardware.

I verified the value is present in eDP spec versions 1.3, 1.4 and 1.4a.

Fixes: 6608804b3d7f ("drm/dp: Add drm_dp_psr_setup_time()")
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-3-dhinakaran.pandiyan@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: Use correct device when freeing buffers

commit 0ed2424b911f3a058dfea01b78817abed767433d upstream.

Commit d5c435df4a890 ("intel_th: msu: Use the real device in case of IOMMU
domain allocation") changes dma buffer allocation to use the actual
underlying device, but forgets to change the deallocation path, which leads
to (if you've got CAP_SYS_RAWIO):

> # echo 0,0 > /sys/bus/intel_th/devices/0-msc0/nr_pages
> ------------[ cut here ]------------
> kernel BUG at ../linux/drivers/iommu/intel-iommu.c:3670!
> CPU: 3 PID: 231 Comm: sh Not tainted 4.17.0-rc1+ #2729
> RIP: 0010:intel_unmap+0x11e/0x130
...
> Call Trace:
>  intel_free_coherent+0x3e/0x60
>  msc_buffer_win_free+0x100/0x160 [intel_th_msu]

This patch fixes the buffer deallocation code to use the correct device.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: d5c435df4a890 ("intel_th: msu: Use the real device in case of IOMMU domain allocation")
Reported-by: Baofeng Tian <baofeng.tian@intel.com>
CC: stable@vger.kernel.org # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "rt2800: use TXOP_BACKOFF for probe frames"

commit 52a192362932f333a7ebafd581c4d9b81da2fec8 upstream.

This reverts commit fb47ada8dc3c30c8e7b415da155742b49536c61e.

In some situations when we set TXOP_BACKOFF, the probe frame is
not sent at all. What it worse then sending probe frame as part
of AMPDU and can degrade 11n performance to 11g rates.

Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/huge_memory.c: __split_huge_page() use atomic ClearPageDirty()

commit 2d077d4b59924acd1f5180c6fb73b57f4771fde6 upstream.

Swapping load on huge=always tmpfs (with khugepaged tuned up to be very
eager, but I'm not sure that is relevant) soon hung uninterruptibly,
waiting for page lock in shmem_getpage_gfp()'s find_lock_entry(), most
often when "cp -a" was trying to write to a smallish file.  Debug showed
that the page in question was not locked, and page->mapping NULL by now,
but page->index consistent with having been in a huge page before.

Reproduced in minutes on a 4.15 kernel, even with 4.17's 605ca5ede764
("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") added
in; but took hours to reproduce on a 4.17 kernel (no idea why).

The culprit proved to be the __ClearPageDirty() on tails beyond i_size in
__split_huge_page(): the non-atomic __bitoperation may have been safe when
4.8's baa355fd3314 ("thp: file pages support for split_huge_page()")
introduced it, but liable to erase PageWaiters after 4.10's 62906027091f
("mm: add PageWaiters indicating tasks are waiting for a page bit").

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805291841070.3197@eggly.anvils
Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Fix error code for invalid GID entry

commit a840c93ca7582bb6c88df2345a33f979b7a67874 upstream.

When a GID entry is invalid EAGAIN is returned. This is an incorrect error
code, there is nothing that will make this GID entry valid again in
bounded time.

Some user space tools fail incorrectly if EAGAIN is returned here, and
this represents a small ABI change from earlier kernels.

The first patch in the Fixes list makes entries that were valid before
to become invalid, allowing this code to trigger, while the second patch
in the Fixes list introduced the wrong EAGAIN.

Therefore revert the return result to EINVAL which matches the historical
expectations of the ibv_query_gid_type() API of the libibverbs user space
library.

Cc: <stable@vger.kernel.org>
Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE")
Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwtracing: stm: fix build error on some arches

commit 806e30873f0e74d9d41b0ef761bd4d3e55c7d510 upstream.

Commit b5e2ced9bf81 ("stm class: Use vmalloc for the master map") caused
a build error on some arches as vmalloc.h was not explicitly included.

Fix that by adding it to the list of includes.

Fixes: b5e2ced9bf81 ("stm class: Use vmalloc for the master map")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Use vmalloc for the master map

commit b5e2ced9bf81393034072dd4d372f6b430bc1f0a upstream.

Fengguang is running into a warning from the buddy allocator:

> swapper/0: page allocation failure: order:9, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc1 #262
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> Call Trace:
...
>  __kmalloc+0x14b/0x180: ____cache_alloc at mm/slab.c:3127
>  stm_register_device+0xf3/0x5c0: stm_register_device at drivers/hwtracing/stm/core.c:695
...

Which is basically a result of the stm class trying to allocate ~512kB
for the dummy_stm with its default parameters. There's no reason, however,
for it not to be vmalloc()ed instead, which is what this patch does.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
CC: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_transport_srp: Fix shost to rport translation

commit c9ddf73476ff4fffb7a87bd5107a0705bf2cf64b upstream.

Since an SRP remote port is attached as a child to shost->shost_gendev
and as the only child, the translation from the shost pointer into an
rport pointer must happen by looking up the shost child that is an
rport. This patch fixes the following KASAN complaint:

BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp]
Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19

CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
dump_stack+0x85/0xc7
print_address_description+0x65/0x270
kasan_report+0x231/0x350
srp_timed_out+0x57/0x110 [scsi_transport_srp]
scsi_times_out+0xc7/0x3f0 [scsi_mod]
blk_mq_terminate_expired+0xc2/0x140
bt_iter+0xbc/0xd0
blk_mq_queue_tag_busy_iter+0x1c7/0x350
blk_mq_timeout_work+0x325/0x3f0
process_one_work+0x441/0xa50
worker_thread+0x76/0x6c0
kthread+0x1b2/0x1d0
ret_from_fork+0x24/0x30

Fixes: e68ca75200fe ("scsi_transport_srp: Reduce failover time")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests

commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream.

Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2].  Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.

Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear.  This corresponds to
modes allowed by `mips_set_personality_fp'.

References:

[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
    Privileged Resource Architecture", Imagination Technologies,
    Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
    "Config5 Register Field Descriptions", p. 262

[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
    Privileged Resource Architecture", Imagination Technologies,
    Document Number: MD00091, Revision 6.03, December 22, 2015, Table
    9.72 "Config5 Register Field Descriptions", p. 288

Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs

commit c7e814628df65f424fe197dde73bfc67e4a244d7 upstream.

Use 64-bit accesses for 64-bit floating-point general registers with
PTRACE_PEEKUSR, removing the truncation of their upper halves in the
FR=1 mode, caused by commit bbd426f542cb ("MIPS: Simplify FP context
access"), which inadvertently switched them to using 32-bit accesses.

The PTRACE_POKEUSR side is fine as it's never been broken and continues
using 64-bit accesses.

Fixes: bbd426f542cb ("MIPS: Simplify FP context access")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/19334/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: lantiq: gphy: Drop reboot/remove reset asserts

commit 32795631e67e16141aa5e065c28ba03bf17abb90 upstream.

While doing a global software reset, these bits are not cleared and let
some bootloader fail to initialise the GPHYs. The bootloader don't
expect the GPHYs in reset, as they aren't during power on.

The asserts were a workaround for a wrong syscon-reboot mask. With a
mask set which includes the GPHY resets, these resets aren't required
any more.

Fixes: 126534141b45 ("MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/19003/
[jhogan@kernel.org: Fix build warnings]
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: select buffer for at91-sama5d2_adc

commit 76974ef9d1bf397b7bb97892a3b3bc516a1fc2c2 upstream.

We need to select the buffer code, otherwise we get build errors
with undefined functions on the trigger and buffer,
if we select just IIO and then AT91_SAMA5D2_ADC from menuconfig

This adds a Kconfig 'select' statement like other ADC
drivers have it already.

Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:kfifo_buf: check for uint overflow

commit 3d13de4b027d5f6276c0f9d3a264f518747d83f2 upstream.

Currently, the following causes a kernel OOPS in memcpy:

echo 1073741825 > buffer/length
echo 1 > buffer/enable

Note that using 1073741824 instead of 1073741825 causes "write error:
Cannot allocate memory" but no OOPS.

This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo
rounds up to the nearest power of 2, it will actually call kmalloc with
roundup_pow_of_two(length) * bytes_per_datum.

Using length == 1073741825 and bytes_per_datum == 2, we get:

kmalloc(roundup_pow_of_two(1073741825) * 2
or kmalloc(2147483648 * 2)
or kmalloc(4294967296)
or kmalloc(UINT_MAX + 1)

so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and
subsequent memcpy to fail once the device is enabled.

Fix this by checking for overflow prior to allocating a kfifo. With this
check added, the above code returns -EINVAL when enabling the buffer,
rather than causing an OOPS.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:buffer: make length types match kfifo types

commit c043ec1ca5baae63726aae32abbe003192bc6eec upstream.

Currently, we use int for buffer length and bytes_per_datum. However,
kfifo uses unsigned int for length and size_t for element size. We need
to make sure these matches or we will have bugs related to overflow (in
the range between INT_MAX and UINT_MAX for length, for example).

In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an
int, which would cause bugs for large values of bytes_per_datum.

Change buffer length to use unsigned int and bytes_per_datum to use
size_t.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad7793: implement IIO_CHAN_INFO_SAMP_FREQ

commit 490fba90a90eb7b741f57fefd2bcf2c1e11eb471 upstream.

This commit is a follow-up to changes made to ad_sigma_delta.h
in staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ
which broke ad7793 as it was not altered to match those changes.

This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ
attribute wherein usage has some advantages like it can be accessed by
in-kernel consumers as well as reduces the code size.

Therefore, use IIO_CHAN_INFO_SAMP_FREQ to implement the
sampling_frequency attribute instead of using IIO_DEV_ATTR_SAMP_FREQ()
macro.

Move code from the functions associated with IIO_DEV_ATTR_SAMP_FREQ()
into respective read and write hooks with the mask set to
IIO_CHAN_INFO_SAMP_FREQ.

Fixes: a13e831fcaa7 ("staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ")

Signed-off-by: Michael Nosthoff <committed@heine.so>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: avoid integer overflows in tcp_rcv_space_adjust()

commit 607065bad9931e72207b0cac365d7d4abc06bd99 upstream.

When using large tcp_rmem[2] values (I did tests with 500 MB),
I noticed overflows while computing rcvwin.

Lets fix this before the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Backport: sysctl_tcp_rmem is not Namespace-ify'd in older kernels]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: clang: disable unused variable warnings only when constant

commit 0a5f41767444cc3b4fc5573921ab914b4f78baaa upstream.

Currently, GCC disables -Wunused-const-variable, but not
-Wunused-variable, so warns unused variables if they are
non-constant.

While, Clang does not warn unused variables at all regardless of
the const qualifier because -Wno-unused-const-variable is implied
by the stronger option -Wno-unused-variable.

Disable -Wunused-const-variable instead of -Wunused-variable so that
GCC and Clang work in the same way.

Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/chrome: cros_ec_lpc: remove redundant pointer request

commit d3b56c566d4ba8cae688baf3cca94425d57ea783 upstream.

Pointer request is being assigned but never used, so remove it. Cleans
up the clang warning:

drivers/platform/chrome/cros_ec_lpc.c:68:2: warning: Value stored to
'request' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: sst: remove redundant variable dma_dev_name

commit 271ef65b5882425d500e969e875c98e47a6b0c86 upstream.

The pointer dma_dev_name is assigned but never read, it is redundant
and can therefore be removed.

Cleans up clang warning:
sound/soc/intel/common/sst-firmware.c:288:3: warning: Value stored to
'dma_dev_name' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Remove variable self-assignment in rf.c

commit fb239c1209bb0f0b4830cc72507cc2f2d63fadbd upstream.

In _rtl92c_get_txpower_writeval_by_regulatory() the variable writeVal
is assigned to itself in an if ... else statement, apparently only to
document that the branch condition is handled and that a previously read
value should be returned unmodified. The self-assignment causes clang to
raise the following warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c:304:13:
  error: explicitly assigning value of variable of type 'u32'
    (aka 'unsigned int') to itself [-Werror,-Wself-assign]
  writeVal = writeVal;

Delete the branch with the self-assignment.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/powerplay: Fix enum mismatch

commit 42b5122e828a6ccd9952ad3116343dc032d33efe upstream.

In several locations the driver uses AMD_CG_STATE_UNGATE (type enum
amd_clockgating_state) instead of AMD_PG_STATE_UNGATE (type enum
amd_powergating_stat) and vice versa. Both constants have the same
value, so this doesn't cause any problems, but we still want to pass
the correct type.

Fixing the mismatch resolves multiple warnings like this when building
with clang:

drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_clockpowergating.c:169:7:
  error: implicit conversion from enumeration type 'enum
  amd_powergating_state' to different enumeration type 'enum
  amd_clockgating_state' [-Werror,-Wenum-conversion]
    AMD_PG_STATE_UNGATE);

Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: remove redundant initialization of sg_table

commit 531beb067c6185aceabfdee0965234c6a8fd133b upstream.

sg_table is being initialized and is never read before it is updated
again later on, hence making the initialization redundant. Remove
the initialization.

Detected by clang scan-build:
"warning: Value stored to 'sg_table' during its initialization is
never read"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914230516.6056-1-colin.king@canonical.com
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Always sanity check engine state upon idling

commit cad9946c2a4375386062131858881cfd30fc1b8f upstream.

When we do a locked idle we know that afterwards all requests have been
completed and the engines have been cleared of tasks. For whatever
reason, this doesn't always happen and we may go into a suspend with
ELSP still full, and this causes an issue upon resume as we get very,
very confused.

If the engines refuse to idle, mark the device as wedged. In the process
we get rid of the maybe unused open-coded version of wait_for_engines
reported by Nick Desaulniers and Matthias Kaehlcke.

v2: Suppress the -EIO before suspend, but keep it for seqno wrap.

References: https://bugs.freedesktop.org/show_bug.cgi?id=101891
References: https://bugs.freedesktop.org/show_bug.cgi?id=102456
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: clang: remove crufty HOSTCFLAGS

commit df16aaac26e92e97ab7234d3f93c953466adc4b5 upstream.

When compiling with `make CC=clang HOSTCC=clang`, I was seeing warnings
that clang did not recognize -fno-delete-null-pointer-checks for HOSTCC
targets.  These were added in commit 61163efae020 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang").

Clang does not support -fno-delete-null-pointer-checks, so adding it to
HOSTCFLAGS if HOSTCC is clang does not make sense.

It's not clear why the other warnings were disabled, and just for
HOSTCFLAGS, but I can remove them, add -Werror to HOSTCFLAGS and compile
with clang just fine.

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: further limit wiphy names to 64 bytes

commit 814596495dd2b9d4aab92d8f89cf19060d25d2ea upstream.

wiphy names were recently limited to 128 bytes by commit a7cfebcb7594
("cfg80211: limit wiphy names to 128 bytes").  As it turns out though,
this isn't sufficient because dev_vprintk_emit() needs the syslog header
string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128
bytes.  This triggered the "device/subsystem name too long" WARN when
the device name was >= 90 bytes.  As before, this was reproduced by
syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM
generic netlink family.

Fix it by further limiting wiphy names to 64 bytes.

Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com
Fixes: a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: KASAN: slab-out-of-bounds in xattr_getsecurity

commit efe3de79e0b52ca281ef6691480c8c68c82a4657 upstream.

Call trace:
 [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428
 [<ffffff9203a8dbf8>] show_stack+0x28/0x38
 [<ffffff920409bfb8>] dump_stack+0xd4/0x124
 [<ffffff9203d187e8>] print_address_description+0x68/0x258
 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0
 [<ffffff9203d1927c>] kasan_report+0x5c/0x70
 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0
 [<ffffff9203d17cdc>] memcpy+0x34/0x68
 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160
 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120
 [<ffffff9203d75d68>] getxattr+0x100/0x2c8
 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0
 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28

If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.

To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.

Signed-off-by: Sachin Grover <sgrover@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Make the snapshot trigger work with instances

commit 2824f5033248600673e3e126a4d135363cbfd9ac upstream.

The snapshot trigger currently only affects the main ring buffer, even when
it is used by the instances. This can be confusing as the snapshot trigger
is listed in the instance.

 > # cd /sys/kernel/tracing
 > # mkdir instances/foo
 > # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger
 > # echo top buffer > trace_marker
 > # echo foo buffer > instances/foo/trace_marker
 > # touch /tmp/bar
 > # chown rostedt /tmp/bar
 > # cat instances/foo/snapshot
 # tracer: nop
 #
 #
 # * Snapshot is freed *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')

 > # cat snapshot
 # tracer: nop
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
             bash-1189  [000] ....   111.488323: tracing_mark_write: top buffer

Not only did the snapshot occur in the top level buffer, but the instance
snapshot buffer should have been allocated, and it is still free.

Cc: stable@vger.kernel.org
Fixes: 85f2b08268c01 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix crash when freeing instances with event triggers

commit 86b389ff22bd6ad8fd3cb98e41cd271886c6d023 upstream.

If a instance has an event trigger enabled when it is freed, it could cause
an access of free memory. Here's the case that crashes:

 # cd /sys/kernel/tracing
 # mkdir instances/foo
 # echo snapshot > instances/foo/events/initcall/initcall_start/trigger
 # rmdir instances/foo

Would produce:

 general protection fault: 0000 [#1] PREEMPT SMP PTI
 Modules linked in: tun bridge ...
 CPU: 5 PID: 6203 Comm: rmdir Tainted: G        W         4.17.0-rc4-test+ #933
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
 RIP: 0010:clear_event_triggers+0x3b/0x70
 RSP: 0018:ffffc90003783de0 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0
 RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016
 R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0
 R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c
 FS:  00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0
 Call Trace:
  event_trace_del_tracer+0x2a/0xc5
  instance_rmdir+0x15c/0x200
  tracefs_syscall_rmdir+0x52/0x90
  vfs_rmdir+0xdb/0x160
  do_rmdir+0x16d/0x1c0
  __x64_sys_rmdir+0x17/0x20
  do_syscall_64+0x55/0x1a0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

This was due to the call the clears out the triggers when an instance is
being deleted not removing the trigger from the link list.

Cc: stable@vger.kernel.org
Fixes: 85f2b08268c01 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c_smbus - fix corrupted stack

commit 40f7090bb1b4ec327ea1e1402ff5783af5b35195 upstream.

New ICs (like the one on the Lenovo T480s) answer to
ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack
as i2c_smbus_read_block_data() uses the values returned by the i2c
device to know how many data it need to return.

i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX)
and there is no safeguard on how many bytes are provided in the return
value. Ensure we always have enough space for any future firmware.
Also 0-initialize the values to prevent any access to uninitialized memory.

Cc: <stable@vger.kernel.org> # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - add Lenovo 80 series ids to SMBus

commit ad8fb554f04e38f155c9bc34bbf521fc592ceee7 upstream.

This time, Lenovo decided to go with different pieces in its latest
series of Thinkpads.

For those we have been able to test:
- the T480 is using Synaptics with an IBM trackpoint
   -> it behaves properly with or without intertouch, there is no point
      not using RMI4
- the X1 Carbon 6th gen is using Synaptics with an IBM trackpoint
   -> the touchpad doesn't behave properly under PS/2 so we have to
      switch it to RMI4 if we do not want to have disappointed users
- the X280 is using Synaptics with an ALPS trackpoint
   -> the recent fixes in the trackpoint handling fixed it so upstream
      now works fine with or without RMI4, and there is no point not
      using RMI4
- the T480s is using an Elan touchpad, so that's a different story

Cc: <stable@vger.kernel.org> # v4.14.x, v4.15.x, v4.16.x
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - add Intertouch support on X1 Carbon 6th and X280

commit 5717a09aeaf62d197deba1fc7ccd6bc45f3a9dcc upstream.

Synaptics devices reported it has Intertouch support,
and it fails via PS/2 as following logs:

psmouse serio2: Failed to reset mouse on synaptics-pt/serio0
psmouse serio2: Failed to enable mouse on synaptics-pt/serio0

Set these new devices to use SMBus to fix this issue, then they report
SMBus version 3 is using, patch:
https://patchwork.kernel.org/patch/9989547/ enabled SMBus ver 3 and
makes synaptics devices work fine on SMBus mode.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI

commit 15e2cffec3aa0d47a8d75ae80e1b136bfb5dff30 upstream.

Lenovo use two different trackpoints in the fifth generation Thinkpad X1
Carbon. Both are accessible over SMBUS/RMI but the pnpIDs are missing.
This patch is for the Elantech trackpoint specifically which also
reports SMB version 3 so rmi_smbus needs to be updated in order to
handle it.

For the record, I was not the first one to come up with this patch as it
has been floating around the internet for a while now. However, I have
spent significant time with testing and my efforts to find the original
author of the patch have been unsuccessful.

Signed-off-by: Edvard Holst <edvard.holst@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI

commit 9b2071028f8def49971a3b213ab6efd02a7e56e8 upstream.

The touchpad on Lenovo Carbon X1 Gen 5 (2017 - Kabylake) is accessible over
SMBUS/RMI, so let's activate it by default.

Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: detect agfl count corruption and reset agfl

commit a27ba2607e60312554cbcd43fc660b2c7f29dc9c upstream.

The struct xfs_agfl v5 header was originally introduced with
unexpected padding that caused the AGFL to operate with one less
slot than intended. The header has since been packed, but the fix
left an incompatibility for users who upgrade from an old kernel
with the unpacked header to a newer kernel with the packed header
while the AGFL happens to wrap around the end. The newer kernel
recognizes one extra slot at the physical end of the AGFL that the
previous kernel did not. The new kernel will eventually attempt to
allocate a block from that slot, which contains invalid data, and
cause a crash.

This condition can be detected by comparing the active range of the
AGFL to the count. While this detects a padding mismatch, it can
also trigger false positives for unrelated flcount corruption. Since
we cannot distinguish a size mismatch due to padding from unrelated
corruption, we can't trust the AGFL enough to simply repopulate the
empty slot.

Instead, avoid unnecessarily complex detection logic and and use a
solution that can handle any form of flcount corruption that slips
through read verifiers: distrust the entire AGFL and reset it to an
empty state. Any valid blocks within the AGFL are intentionally
leaked. This requires xfs_repair to rectify (which was already
necessary based on the state the AGFL was found in). The reset
mitigates the side effect of the padding mismatch problem from a
filesystem crash to a free space accounting inconsistency. The
generic approach also means that this patch can be safely backported
to kernels with or without a packed struct xfs_agfl.

Check the AGF for an invalid freelist count on initial read from
disk. If detected, set a flag on the xfs_perag to indicate that a
reset is required before the AGFL can be used. In the first
transaction that attempts to use a flagged AGFL, reset it to empty,
warn the user about the inconsistency and allow the freelist fixup
code to repopulate the AGFL with new blocks. The xfs_perag flag is
cleared to eliminate the need for repeated checks on each block
allocation operation.

This allows kernels that include the packing fix commit 96f859d52bcb
("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct")
to handle older unpacked AGFL formats without a filesystem crash.

Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: convert XFS_AGFL_SIZE to a helper function

commit a78ee256c325ecfaec13cafc41b315bd4e1dd518 upstream.

The AGFL size calculation is about to get more complex, so lets turn
the macro into a function first and remove the macro.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
[darrick: forward port to newer kernel, simplify the helper]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()

commit de0aa7b2f97d348ba7d1e17a00744c989baa0cb6 upstream.

1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().

Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.

hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.

We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.

2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.

Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.

Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.

Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "pinctrl: msm: Use dynamic GPIO numbering"

This reverts commit bd36ea57d6d58041180c4f7d2c2bf5194c26845d which is
commit a7aa75a2a7dba32594291a71c3704000a2fd7089 upstream.

There's been too many complaints about this.  Personally I think it's
going to blow up when people hit this in mainline, but hey, it's not my
systems.  At least we don't have to backport the mess to the stable
kernels to give them some more life to live unscathed :)

Reported-by: Timur Tabi <timur@codeaurora.org>
Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/MCE/AMD: Cache SMCA MISC block addresses

commit 78ce241099bb363b19dbd0245442e66c8de8f567 upstream.

... into a global, two-dimensional array and service subsequent reads from
that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs
disabled).

In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage
of the bank->blocks pointer.

Fixes: 27bd59502702 ("x86/mce/AMD: Get address from already initialized block")
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20180414004230.GA2033@probook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce/AMD: Carve out SMCA get_block_address() code

commit 8a331f4a0863bea758561c921b94b4d28f7c4029 upstream.

Carve out the SMCA code in get_block_address() into a separate helper
function.

No functional change.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
[ Save an indentation level. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180215210943.11530-4-Yazen.Ghannam@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Fix "noreturn" detection for recursive sibling calls

commit 0afd0d9e0e7879d666c1df2fa1bea4d8716909fe upstream.

Objtool has some crude logic for detecting static "noreturn" functions
(aka "dead ends").  This is necessary for being able to correctly follow
GCC code flow when such functions are called.

It's remotely possible for two functions to call each other via sibling
calls.  If they don't have RET instructions, objtool's noreturn
detection logic goes into a recursive loop:

  drivers/char/ipmi/ipmi_ssif.o: warning: objtool: return_hosed_msg()+0x0: infinite recursion (objtool bug!)
  drivers/char/ipmi/ipmi_ssif.o: warning: objtool: deliver_recv_msg()+0x0: infinite recursion (objtool bug!)

Instead of reporting an error in this case, consider the functions to be
non-dead-ends.

Reported-and-tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: damian <damian.tometzki@icloud.com>
Link: http://lkml.kernel.org/r/7cc156408c5781a1f62085d352ced1fe39fe2f91.1525923412.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Detect RIP-relative switch table references, part 2

commit 7dec80ccbe310fb7e225bf21c48c672bb780ce7b upstream.

With the following commit:

  fd35c88b7417 ("objtool: Support GCC 8 switch tables")

I added a "can't find switch jump table" warning, to stop covering up
silent failures if add_switch_table() can't find anything.

That warning found yet another bug in the objtool switch table detection
logic.  For cases 1 and 2 (as described in the comments of
find_switch_table()), the find_symbol_containing() check doesn't adjust
the offset for RIP-relative switch jumps.

Incidentally, this bug was already fixed for case 3 with:

  6f5ec2993b1f ("objtool: Detect RIP-relative switch table references")

However, that commit missed the fix for cases 1 and 2.

The different cases are now starting to look more and more alike.  So
fix the bug by consolidating them into a single case, by checking the
original dynamic jump instruction in the case 3 loop.

This also simplifies the code and makes it more robust against future
switch table detection issues -- of which I'm sure there will be many...

Switch table detection has been the most fragile area of objtool, by
far.  I long for the day when we'll have a GCC plugin for annotating
switch tables.  Linus asked me to delay such a plugin due to the
flakiness of the plugin infrastructure in older versions of GCC, so this
rickety code is what we're stuck with for now.  At least the code is now
a little simpler than it was.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Detect RIP-relative switch table references

commit 6f5ec2993b1f39aed12fa6fd56e8dc2272ee8a33 upstream.

Typically a switch table can be found by detecting a .rodata access
followed an indirect jump:

    1969: 4a 8b 0c e5 00 00 00  mov    0x0(,%r12,8),%rcx
    1970: 00
196d: R_X86_64_32S .rodata+0x438
    1971: e9 00 00 00 00        jmpq   1976 <dispc_runtime_suspend+0xb6a>
1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4

Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata
access uses RIP-relative addressing:

    19bd: 48 8b 3d 00 00 00 00  mov    0x0(%rip),%rdi        # 19c4 <dispc_runtime_suspend+0xbb8>
19c0: R_X86_64_PC32 .rodata+0x45c
    19c4: e9 00 00 00 00        jmpq   19c9 <dispc_runtime_suspend+0xbbd>
19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4

In this case the relocation addend needs to be adjusted accordingly in
order to find the location of the switch table.

The fix is for case 3 (as described in the comments), but also make the
existing case 1 & 2 checks more precise by only adjusting the addend for
R_X86_64_PC32 relocations.

This fixes the following warnings:

  drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame
  drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b6098294fd67afb69af8c47c9883d7a68bf0f8ea.1526305958.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Support GCC 8 switch tables

commit fd35c88b74170d9335530d9abf271d5d73eb5401 upstream.

With GCC 8, some issues were found with the objtool switch table
detection.

1) In the .rodata section, immediately after the switch table, there can
   be another object which contains a pointer to the function which had
   the switch statement.  In this case objtool wrongly considers the
   function pointer to be part of the switch table.  Fix it by:

   a) making sure there are no pointers to the beginning of the
      function; and

   b) making sure there are no gaps in the switch table.

   Only the former was needed, the latter adds additional protection for
   future optimizations.

2) In find_switch_table(), case 1 and case 2 are missing the check to
   ensure that the .rodata switch table data is anonymous, i.e. that it
   isn't already associated with an ELF symbol.  Fix it by adding the
   same find_symbol_containing() check which is used for case 3.

This fixes the following warnings with GCC 8:

  drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72
  net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64
  drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48
  drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24
  drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32
  drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: damian <damian.tometzki@icloud.com>
Link: http://lkml.kernel.org/r/20180510224849.xwi34d6tzheb5wgw@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Support GCC 8's cold subfunctions

commit 13810435b9a7014fb92eb715f77da488f3b65b99 upstream.

GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in
.text.unlikely.  Properly detect the new subfunctions and treat them as
extensions of the original functions.

This fixes a bunch of warnings like:

  kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame
  kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame
  kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame
  kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame

Reported-and-tested-by: damian <damian.tometzki@icloud.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0965e7fcfc5f31a276f0c7f298ff770c19b68706.1525923412.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix the NULL mapping case in __isolate_lru_page()

commit 145e1a71e090575c74969e3daa8136d1e5b99fc8 upstream.

George Boole would have noticed a slight error in 4.16 commit
69d763fc6d3a ("mm: pin address_space before dereferencing it while
isolating an LRU page").  Fix it, to match both the comment above it,
and the original behaviour.

Although anonymous pages are not marked PageDirty at first, we have an
old habit of calling SetPageDirty when a page is removed from swap
cache: so there's a category of ex-swap pages that are easily
migratable, but were inadvertently excluded from compaction's async
migration in 4.16.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils
Fixes: 69d763fc6d3a ("mm: pin address_space before dereferencing it while isolating an LRU page")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Ivan Kalvachev <ikalvachev@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix io_destroy()/aio_complete() race

commit 4faa99965e027cc057c5145ce45fa772caa04e8d upstream.

If io_destroy() gets to cancelling everything that can be cancelled and
gets to kiocb_cancel() calling the function driver has left in ->ki_cancel,
it becomes vulnerable to a race with IO completion.  At that point req
is already taken off the list and aio_complete() does *NOT* spin until
we (in free_ioctx_users()) releases ->ctx_lock.  As the result, it proceeds
to kiocb_free(), freing req just it gets passed to ->ki_cancel().

Fix is simple - remove from the list after the call of kiocb_cancel().  All
instances of ->ki_cancel() already have to cope with the being called with
iocb still on list - that's what happens in io_cancel(2).

Cc: stable@kernel.org
Fixes: 0460fef2a921 "aio: use cancellation list lazily"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.47

Revert "vti4: Don't override MTU passed on link creation via IFLA_MTU"

This reverts commit 5815901c29c2936d7acbed2683d5807b4ae53ede which is
03080e5ec727 ("vti4: Don't override MTU passed on link creation via
IFLA_MTU") upstream as it causes test failures.

This commit should not have been backported to anything older than 4.16,
despite what the changelog said as the mtu must be set in older kernels,
unlike is needed in 4.16 and newer.

Thanks to Alistair Strachan for the debugging help figuring this out,
and for 'git bisect' for making my life a whole lot easier.

Cc: Alistair Strachan <astrachan@google.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.46

Revert "perf record: Fix crash in pipe mode"

This reverts commit f766148e47d7d3b8a7128cae511971c0f793e38e which is
commit ad46e48c65fa1f204fa29eaff1b91174d314a94b upstream.

It breaks the build.  Turns out we don't test perf on stable releases,
we need to fix that :(

Reported-by: Pavlos Parissis <pavlos.parissis@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: sync up .h files with the repective arch and uapi .h files

perf wants matching .h files otherwise it complains during the build
process.  As these files have been modified over the past few 4.14.y
releases, they are out of sync, so fix that problem by properly copying
the respective versions to the tools/ mirror copies.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Add trace/beauty/generated/ into .gitignore

commit 2fe2230d4183d2c311bbb7b426491ac486216a16 upstream.

No functionality changes.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180130053053.13214-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.45

drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful

commit 91ba9f28a3de97761c2b5fd5df5d88421268e507 upstream.

SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO
(and not call a new vmw_dmabuf_init) when a new fb size is same as
current fb. This was changed in a recent commit which is causing
page_flip to fail on VM with low display memory and multi-mon failure
when cycle monitors from secondary display.

Cc: <stable@vger.kernel.org> # 4.14, 4.16
Fixes: 20fb5a635a0c ("drm/vmwgfx: Unpin the screen object backup buffer when not used")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: make "mdr" command repeat

[ Upstream commit 1e0ce03bf142454f38a5fc050bf4fd698d2d36d8 ]

The "mdr" command should repeat (continue) when only Enter/Return
is pressed, so make it do so.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: mcp23s08: spi: Fix regmap debugfs entries

[ Upstream commit 9b3e4207661e67f04c72af15e29f74cd944f5964 ]

The SPI version of this chip allows several devices to be present on the
same SPI bus via a local address. If this is in action and if the kernel
has debugfs, however, the code attempts to create duplicate entries for
the regmap's debugfs:

  mcp23s08 spi1.1: Failed to create debugfs directory

This patch simply assigns a local name matching the device logical
address to the `struct regmap_config`.

No changes are needed for MCP23S18 because that device does not support
any logical addressing. Similarly, I2C devices do not need any action,
either, because they are already different in their I2C address.

A similar problem is present for the pinctrl debugfs instance, but that
one is not addressed by this patch.

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: msm: Use dynamic GPIO numbering

[ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ]

The base of the TLMM gpiochip should not be statically defined as 0, fix
this to not artificially restrict the existence of multiple pinctrl-msm
devices.

Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Reported-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'

[ Upstream commit 30966861a7a2051457be8c49466887d78cc47e97 ]

If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must
release the reference on the current 'child' node before returning.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: porter: Fix HDMI output routing

[ Upstream commit d4b78db6ac3e084e2bdc57d5518bd247c727f396 ]

The HDMI encoder is connected to the RGB output of the DU, which is
port@0, not port@1. Fix the incorrect DT description.

Fixes: c5af8a4248d3 ("ARM: dts: porter: add DU DT support")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx7d: cl-som-imx7: fix pinctrl_enet

[ Upstream commit 2bada7ac1fdcbf79a9689bd2ff65fa515ca7a31f ]

The missing last digit of the CONFIG values is added. Looks like a typo
of some sort when comparing to the downstream dt. This fixes
intermittent behavior behaviour of the ethernet controllers.

Signed-off-by: Aapo Vienamo <aapo@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Add delay after EMP reset for firmware to recover

[ Upstream commit 1fa51a650e1deb50410677f1bd6c0ce17aa48a49 ]

This patch adds necessary delay for 4.33 firmware to recover after
EMP reset. Without this patch driver occasionally reinitializes
structures too quickly to communicate with firmware after EMP reset
causing AdminQ to timeout.

Signed-off-by: Filip Sadowski <filip.sadowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: Correct comparison in regmap_cached

[ Upstream commit 71df179363a5a733a8932e9afb869760d7559383 ]

The cache pointer points to the actual memory used by the cache, as the
comparison here is looking for the type of the cache it should check
against cache_type.

Fixes: 1ea975cf1ef5 ("regmap: Add a function to check if a regmap register is cached")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: tse850: use the correct compatible for the eeprom

[ Upstream commit 7981190fb5dd710dea08c2613cee3d05e795ca5e ]

The used part does contain an eeprom compatible with an Atmel 24c02
chip and it is from NXP, but it is not called 24c02. It's actually a
se97b chip. Adjust the compatible accordingly.

Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2

[ Upstream commit 8525d04ba8a6a9ecfa4bd619c988ca873a5fc2a4 ]

According to the latest revision 2.00 of the R-Car Gen2 manual, the LVDS
and the bias circuit must be enabled after the LVDS I/O pins are
enabled, not before. Fix the Gen2 LVDS startup sequence accordingly.

While at it, also fix the comment preceding the first LVDCR0 write that
still talks about hardcoding the LVDS mode 0.

Fixes: 90374b5c25c9 ("drm/rcar-du: Add internal LVDS encoder support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen3

[ Upstream commit 796ceb9269626afaed3b4955c40d2c3d7a8c5d01 ]

According to the latest revisions of the R-Car Gen3 manual, the LVDS mode
must be set before the LVDS I/O pins are enabled, not after -- fix the
Gen3 LVDS startup sequence accordingly.

Fixes: e947eccbeba4 ("drm: rcar-du: Add support for LVDS mode selection")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Updated comment in rcar_du_lvdsenc_start_gen3()]
[Moved Gen2 startup comment update to separate commit]
[Fixed =| typo]
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlabel: If PF_INET6, check sk_buff ip header version

[ Upstream commit 213d7f94775322ba44e0bbb55ec6946e9de88cea ]

When resolving a fallback label, check the sk_buff version as it
is possible (e.g. SCTP) to have family = PF_INET6 while
receiving ip_hdr(skb)->version = 4.

Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/net: fixes psock_fanout eBPF test case

[ Upstream commit ddd0010392d9cbcb95b53d11b7cafc67b373ab56 ]

eBPF test fails due to verifier failure because log_buf is too small.
Fixed by increasing log_buf size

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tests: Fix dwarf unwind for stripped binaries

[ Upstream commit fdf7c49c200d1b9909e2204cec5bd68b48605c71 ]

When we strip the perf binary, dwarf unwind test stop
to work. The reason is that strip will remove static
function symbols, which we need to check for unwind.

This change will keep this test working in cases where
the global symbols are put into dynamic symbol table,
which is the case on x86. It still won't work on powerpc.

Making those 5 local functions global, and adding
'test_dwarf_unwind__' to their names.

Committer testing:

Before:

  # perf test dwarf
  58: DWARF unwind                               : Ok
  # strip ~/bin/perf
  # perf test dwarf
  58: DWARF unwind                               : FAILED!
  # perf test -v dwarf
  58: DWARF unwind                               :
  --- start ---
  test child forked, pid 6590
  unwind: thread map already set, dso=/home/acme/bin/perf
  <SNIP>
  unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144
  unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5)
  got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind
  unwind: '':ip = 0x4a50bb (0xa50bb)
  failed: got unresolved address 0xa50bb
  unwind failed
  test child finished with -1
  ---- end ----
  DWARF unwind: FAILED!
  #

After:

  # perf test dwarf
  58: DWARF unwind                               : Ok
  # strip ~/bin/perf
  # perf test dwarf
  58: DWARF unwind                               : Ok
  #
  # perf test -v dwarf
  58: DWARF unwind                               :
  --- start ---
  test child forked, pid 7219
  unwind: thread map already set, dso=/home/acme/bin/perf
  <SNIP>
  unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144
  unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044)
  got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample
  unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7)
  got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread
  unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468)
  got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare
  unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8)
  got: bsearch 0x394d8, expecting bsearch
  unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1)
  got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3
  unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b)
  got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2
  unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b)
  got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1
  unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605)
  got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind
  test child finished with 0
  ---- end ----
  DWARF unwind: Ok
  #

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>