staging: fbtft: propagate error code from kstrto*()

kstrto*() functions return proper error code.

Do propogate it to the user.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: remove custom DMA mapped buffer

There is no need to duplicate what SPI core already does, i.e. mapping buffers
for DMA capable transfers.

Remove all related pices of code.

Note, that code, besides its redundancy, was buggy: DMA address potentially can
be 0, SPI slave device has nothing to do with DMA capable device properties and
DMA mask in particular.

Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: convert fbtft_reset() to be non-atomic

First of all, fbtft in current state doesn't allow to override GPIOs to be
optional, like "reset" one. It might be a bug somewhere, but rather out of
scope of this fix.

Second, not all GPIOs available on the board would be SoC based, some of them
might sit on I2C GPIO expanders, for example, on Intel Edison/Arduino, and thus
any communication with them might sleep.

Besides that using udelay() and mdelay() is kinda resource wasteful.

Summarize all of the above, convert fbtft_reset() function to non-atomic
variant by using gpio_set_value_cansleep(), usleep_range(), and msleep().

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove NULL test before vfree

vfree frees the virtually continuous block of memory beginning at
addr. If addr is NULL, no operation is performed. So, NULL test is not
needed before vfree().

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04: Fix coding style errors "open brace go on the same line"

Open braces for enum, union and struct go on the same line.

Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change sfw_counter_t to proper structure

Change sfw_counter_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change srpc_counters_t to proper structure

Change srpc_counters_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_test_ping_param_t to proper structure

Change lst_test_ping_param_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_test_bulk_param_t to proper structure

Change lst_test_bulk_param_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_brw_[type|flags]_t to proper enum

Change lst_brw_[type|flags]_t from typedef to proper enum.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_test_args_t to proper structure

Change lstio_test_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_test_type_t to proper enum

Change lst_test_type_t from typedef to proper enum.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_stat_args_t to proper structure

Change lstio_stat_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_info_args_t to proper structure

Change lstio_batch_info_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_list_args_t to proper structure

Change lstio_batch_list_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_query_args_t to proper structure

Change lstio_batch_query_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_stop_args_t to proper structure

Change lstio_batch_stop_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_run_args_t to proper structure

Change lstio_batch_run_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_del_args_t to proper structure

Change lstio_batch_del_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_add_args_t to proper structure

Change lstio_batch_add_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_info_args_t to proper structure

Change lstio_group_info_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_list_args_t to proper structure

Change lstio_group_list_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_nodes_args_t to proper structure

Change lstio_group_nodes_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_update_args_t to proper structure

Change lstio_group_update_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_del_args_t to proper structure

Change lstio_group_del_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_add_args_t to proper structure

Change lstio_group_add_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_debug_args_t to proper structure

Change lstio_debug_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_session_end_args_t to proper structure

Change lstio_session_end_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_session_info_args_t to proper structure

Change lstio_session_info_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_session_new_args_t to proper structure

Change lstio_session_new_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_trans_stat_t to proper structure

Change lstcon_trans_stat_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_rpc_ent_t to proper structure

Change lstcon_rpc_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_test_batch_ent_t to proper structure

Change lstcon_test_batch_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_batch_ent_t to proper structure

Change lstcon_batch_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_test_ent_t to proper structure

Change lstcon_test_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_ndlist_ent_t to proper structure

Change lstcon_ndlist_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_node_ent_t to proper structure

Change lstcon_node_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_bid_t to proper structure

Change lst_bid_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_nid_t to proper structure

Change lst_nid_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_arm: Avoid premature message stalls

The constants MAX_COMPLETIONS and MSG_QUEUE_SIZE control
the number of messages that can be outstanding to each client
before the system as a whole stalls. If the numbers are too
small then unnecessary thread switching will occur while
waiting for a (potentially low priority) client thread to
consume some data; badly written clients can even lead to
deadlock.

For services that carry many short messages, 16 messages can
represent a very small amount of data. Since the resources
are small - 16 bytes for a completion, 4 bytes for a message
pointer - increase the limits so they are unlikely to be hit
except in exceptional circumstances.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Fix messages appearing twice

An issue was observed when flushing openmax components
which generate a large number of messages returning
buffers to host.

We occasionally found a duplicate message from 16
messages prior, resulting in a buffer returned twice.

So fix the issue by adding more memory barriers.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_arm: Service callbacks must not fail

Service callbacks are not allowed to return an error. The internal
callback that delivers events and messages to user tasks does not
enqueue them if the service is closing, but this is not an error
and should not be reported as such.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_arm: Fix unlocked access to dequeue_pending

The dequeue_pending flag wasn't protected by a spinlock in the
service_callback. So fix this to make it safe.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_core: Reduce the memdump size

This reduces the memory dump size to a sufficient value of 16 bytes.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: audio: Ensure proper byte order

Proper byte order was completely disregarded for multi byte data shared
between AP and module (and APB1). Fix this.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: audio: Cleanup junk codec registers

Dummy codec register were initially added while populating dummy codec
mixer controls until module topology parser was available. Now, these
dummy registers are nowhere used and thus can be safely removed.

Since ASoC framework requires a valid callback for both read & write
register APIS, currently empty placeholders are kept to avoid panic.

Later, register mapping logic can be defined:
1. Assuming fixed number of maximum modules connected and register bits
corresponds to basic info of each module OR
2. With a logic to dynamically grow register_cache_size based on codec
modules added/removed.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: audio: Initialize sig_bits before configuring hwparams

Uninitialized variable sig_bits was used while configuring stream params
for codec module. These params are used to configure PCM settings for
APBridgeA.

Usually, this is dependent on codec capability and thus populated via
codec dai_driver definition. In our case, it is fixed to 16 based on the
data format, container supported.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: audio: Avoid less than zero check for le32 variable

mixer control->info call back function checks for -ve values to rebase
min and max values. However, le32 variable is used to fetch values from
GB module FW. Thus negative value checking is not required. Fix this!!

Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback_test: use octal permissions instead of symbolic

checkpatch.pl warning:
Symbolic permissions are not preferred. Consider using octal permissions.

Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: replace decimal with 4-digit octal permissions

Following error detected by checkpatch.pl:

ERROR: Use 4 digit octal (0777) not decimal permissions

Signed-off-by: Stefano Manni <stefano.manni@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix type sign of len in rtw_get_bcn_info

len was declared unsigned int where we use an int

Fix sparse (-Wtypesign) issues:
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1081:88: warning: incorrect type in argument 3 (different signedness)
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1081:88:    expected int *len
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1081:88:    got unsigned int *<noident>
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1091:86: warning: incorrect type in argument 3 (different signedness)
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1091:86:    expected int *len
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1091:86:    got unsigned int *<noident>

Signed-off-by: Pierre-Yves Kerbrat <pkerbrat@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix type of wpa_ielen in rtw_get_cipher_info

wpa_ielen was declared u32 when we actually use an int

Fix sparse (-Wtypesign) issues:
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1008:60: warning: incorrect type in argument 2 (different signedness)
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1008:60:    expected int *wpa_ie_len
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1008:60:    got unsigned int *<noident>
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1021:69: warning: incorrect type in argument 2 (different signedness)

Signed-off-by: Pierre-Yves Kerbrat <pkerbrat@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: fix checkpatch block comments warning

Fix the following warnings:
Block comments should align the * on each line

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: Support more PXI cards

Add support for NI PXI-6220, PXI-6221, PXI-6229, PXI-6250, PXI-6254,
PXI-6259, PXIe-6259, PXI-6280, PXI-6284, and PXI-6289 boards, treating
them the same as the correspondingly numbered PCI and PCIe boards (apart
from having different Comedi board name strings).  The same has
previously been done for other PXI boards supported by the driver.

The PCI device IDs for the newly supported boards come from the
"nixswv.inf" file in National Instrument's Windows drivers.

Also, sort `ni_pcimio_pci_table[]` by PCI device ID.  It is mostly
sorted already, so only the entries for PXI-6251 and PXIe-6251 need
moving.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: Support PCI-6224

Add support for the NI PCI-6224 board, assuming it behaves like the NI
PXI-6224 board at the register level.

The PCI device ID comes from the "nitiowv.inf" file in National
Instrument's Windows drivers.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.11a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new device support, features and cleanups for IIO in the 4.11 cycle.

It's shaping to be another fairly busy cycle. Lots more on the way!

New device support
* ads7950
  - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954,
  ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs.
* cm3605
  - New driver for this light sensor and proximity sensor  which is an
  analog part with some additional digital controls.
* hx711
  - New driver.

Core new stuff
* Gravity sensor type.  This is a processed datastream in which the device
will try to work out which way is down.
* Split the buffer.h file into two parts. One provides the interface to 'use'
a buffer, the second provides the internals of the buffer functionality as
needed by implementations of buffers.
  - Move documentation inline so as to allow use of private: tag when
  generating documentation.
  - Add some utility functions for the few things that are directly done
  with the buffers.
  - Stop exporting functions that no-one uses outside of the core code.
  - Push docs down by the code in the c file where they should have always
  been.
  - Fix typo in kernel-doc for buffer.
  - push down some includes that were previously happening implicitly.
  - stop enabling the timestamp of the dummy device.

Features and cleanups
* ad5592r
  - ACPI support
* ad5593r
  -ACPI support.
* ad5933
  - Fix a false comment about size of a particular register.
* ad7150
  - replace S_IRUGO | S_IWUSR with 0644.  I'm not that keen on these patches
  in general, but as it was nicely presented I took this one anyway. As a
  general rule will only take these as part of a larger driver cleanup.
  - don't eat an error but rather reutnr it in the write_event_config callback.
* ad7606
  - replace non standard range attibute with _scale
* ade7753
  - use usleep_range for short sleeps
* ade7754
  - use usleep_range for short sleeps
* ade7758
  - use usleep_range for short sleeps
* ade7759
  - use usleep_range for short sleeps
* ade7854
  - use usleep_range for short sleeps
* adis16201
  - fix description
* adis16203
  - fix description
  - fix copyright year
* adis16209
  - fix description
* adt7316
  - Add braces to arms of if else statement (for consistency)
  - Alignment fixes.
* axp288
  - Fix up an issue with accidental overwrites of data.
* bmi160
  - add deivce tables for i2c and spi to support correctly identifying the
  full dt name (including manufacturer).
  - device tree binding.
* bmp280
  - use usleep_range for short sleeps.
* cm3232
  - return error from cm3232_reg_init rather than eating it if the last write
  fails.
* dummy driver
  - remove a semicolor found at end of a function defintition.
* exynos-adc
  - use usleep_range for short sleeps.
* hid-sensor (accel)
  - Add timestamp support.  The hardware can provide timestamps so lets support
  them. If not fall back to timestamps estimated in kernel.
* hid-sensor (light)
  - Add a duplicate ID for the light channels so as to keep existing interface
  whilst also using the more standard IIO interface.
* hts221
  - acpi probing
* imx25-gcq
  - Add a macro call to allow this driver to be automatically loaded.
* isl29028
  - reorganise code to avoid deep nesting of if statements.
  - move chip test and default regs into a function suitable or sharing with
  power management code.
  - tidy up some code alignment.
* lidar-lite-v3
  - introduce compatible strings that make it clear Garmin have consideral
  friends.
* mma8452
  - avoid returning signed value when unsigned is appropriate
* spmi-vadc
  - Update function for generic voltage conversion to take into account that
  different channels on this device should be handled differently.
  - Rework code to allow per channel voltage scaling and support the standard
  options for this hardware.
  - Fixup three minor issues with the above patches for this part. These all
  effect test builds rather than the native builds for the part, but good to
  clean them up anyway.
* st_sensors
  - support device matching from the ACPI DST tables.
  - acpi based probing for accelerometers
  - acpi based probing for pressure sensors
  - Allow pressure sensors to read negative values.
  - Export sampling frequency for lps25h and lps331ap.
  - Add support for the old DT bindings from the period when these deivces
  were often supported through windows.

Docs fixup:
* typo in sysfs-bus-iio

staging:r8188eu: remove unused rx_head member of struct recv_frame

Value of rx_head member of struct recv_frame does not used. Remove it.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: remove unnecessary trace output in rtw_recv_indicatepkt()

Trace output for each received packet in rtw_recv_indicatepkt() is redudant.
Remove it.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: remove unused struct wifidirect_info and all corresponding code

wifidirect_info structure is unused.
Big amount of another definitions used only for wifidirect_info definition.
Remove all.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: remove unused get_rxmem()

get_rxmem() is not unused, remove it.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: remove unused EOR macro

EOR macro is not unused, remove it.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: remove unused WPA_(GET|PUT)_(BE|LE)_xx macro

WPA_(GET|PUT)_(BE|LE)_xx macros are unused, remove it.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: remove unused (GET|PUT)U32 macros

(GET|PUT)U32 macros are unused, remove it.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android/ion: Use variable names in header

Populate header function signatures with variable names as well, not
just variable types.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android/ion: Align comment mark

Fix missing space right before multiple line comment closing.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android/ion: Don't use return in void function

Return statements are superfluous in void functions, and checkpatch
complains about them too.

Remove offending return.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android/ion: Split function call

Fix checkpatch error of line exceeding 80 characters.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:wilc_sdio.c Deleted un-needed blank lines

Fixes checkpatch CHECK:
Blank lines aren't necessary before a close brace '}'
Please don't use multiple blank lines

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:wilc_sdio.c Aligns code match open parenthesis

Fixes checkpatch CHECK: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:wilc_debugfs.c Removes multiple blank lines

Fixes checkpatch CHECK: Please don't use multiple blank lines

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:wilc_debugfs.c Aligns code to match open parenthesis

Fixes checkpatch CHECK: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:linux_wlan.c Align code to match open parenthesis

Fixes checkpatch CHECK: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:host_interface.c Added braces {} on else statemement

Fixes checkpatch warning: braces {} should be used on all arms of
this statement

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng:cfg80211.c Aligned code with open parenthesis

Fixed Alignment should match open parenthesis checkpatch CHECK.

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl8192e: Remove NULL test before vfree

vfree frees the virtually continuous block of memory beginning at addr.
If addr is NULL, no operation is performed. So, NULL test is not needed
before vfree.

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8188eu: include: wifi: Removed unnecessary defined macros

Removed macros not in use.

Signed-off-by: Kartikey Singh <dr.kartikeynrc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: staging: rtl8192e: style fix, octal file permissions

Changed file permissions to octal.
Found with checkpatch.

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:mac.c Aligned to match open parenthesis

Fixes checkpatch warning: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fix sparse warnings about endianness

Fixed sparse warnings about endianness. E.g.:

warning: cast to restricted __le16

Signed-off-by: Eric Salem <ericsalem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl: fix possible NULL pointer dereference

gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:

staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]

I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.

This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.

Cc: stable@vger.kernel.org
Fixes: 1cc18a22b96b ("staging: r8188eu: Add files for new driver - part 5")
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Removed multiple white lines.

Remove one unnecessary white line.

Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Add character '*' in all lines of the block comments.

Correct code style error. Add a character in every line of the
comment block.

Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: media: davinci_vpfe: style fix, using octal file permissions

Change file permissions to octal style.
Found using checkpatch.

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Fix brace style issue in ks_wlan_net.c

This change fixes a checkpatch error for "that open brace { should be
on the previous line" as well as a related spacing warning.

Signed-off-by: David Wittman <dwittman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rts5208: fix endianness handling

'cb' and 'sgb' were assigned __le values but were not marked as such,
this fixes the following sparse warnings:

drivers/staging/rts5208/rtsx_transport.c:220:34: warning: incorrect type in assignment (different base types)
drivers/staging/rts5208/rtsx_transport.c:220:34:    expected unsigned int [unsigned] [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:220:34:    got restricted __le32 [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44: warning: incorrect type in assignment (different base types)
drivers/staging/rts5208/rtsx_transport.c:319:44:    expected unsigned long long [unsigned] [long] [long long] [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44:    got restricted __le64 [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44: warning: incorrect type in assignment (different base types)
drivers/staging/rts5208/rtsx_transport.c:319:44:    expected unsigned long long [unsigned] [long] [long long] [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44:    got restricted __le64 [usertype] <noident>

Signed-off-by: Omri Arad <omriarad3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme: vme_user.c: fix warning 'line over 80 characters'

Removed checkpatch.pl warning 'line over 80 characters' by inserting a
linebreak in the comment line 50.

Signed-off-by: Philip Thiemann <philip.thiemann@fau.de>
Signed-off-by: Fabian Arnold <fabian.arnold@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: Fix mismatch between types used in sizeof operator

Fixed mismatch between types used in sizeof operator.

Signed-off-by: Eric Salem <ericsalem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: fix checkpatch unsigned warnings

Fix checkpatch warnings for parameter type unsigned in greybus.
Note that this patch does not fix all checkpatch warnings for the
affected files.

Signed-off-by: Christian Bewermeyer <christian.bewermeyer@fau.de>
Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: fix checkpatch braces not necessary warning

Fix the following warnings:
braces {} are not necessary for any arm of this statement

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback_test: fix checkpatch bad function definition error

Fix the following Errors:
Bad function definition - void abort() should probably be void abort(void)

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: greybus: style fix, permissions as octal

Changed permissions to be in octal style.
Found by checkpatch.

Signed-off-by: Derek Robson <robsonde@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: silence a shift wrapping warning

"svcpt->scp_hist_seq" is a u64 so static checkers complain that 1U
should be 1ULL.  I looked at REQS_SEQ_SHIFT() a little and it seems to
be capped by the number of CPUs online and the amount of memory, but I
think it could go above 32 possibly.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:qcom-spmi-vadc: use div64_s64 instead of direct 64 bit division.

Another one of these that we missed previously which prevents test builds
of this driver on 32 bit platforms as it gives an undefined __divdi3 warning.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:adc:qcom-spmi-vadc silence a long constant warning.

It is meant to be long and is only added to an s64.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Rama Krishna Phani A <rphani@codeaurora.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:adc:qcom-spmi-vadc : fix undefined __divdi3

A simple do_div call works here as all the signed 64 bit is
actually small and unsigned at this point, and the numerator is
u32.

Introduce a temporary u64 variable to avoid type comparison warnings
on some architectures.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Rama Krishna Phani A <rphani@codeaurora.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: hx711: Add IIO driver for AVIA HX711

This is the IIO driver for AVIA HX711 ADC which is mostly used in weighting
cells.

The protocol is quite simple and using GPIOs:
One GPIO is used as clock (SCK) while another GPIO is read (DOUT)

The raw value read from the chip is delivered.
To get a weight one needs to subtract the zero offset and scale it.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: hx711: Add DT binding for avia,hx711

Add DT bindings for avia,hx711
Add vendor avia to vendor list

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications

For some reason the axp288_adc driver was modifying the
AXP288_ADC_TS_PIN_CTRL register, changing bits 0-1 depending on
whether the GP_ADC channel or another channel was written.

These bits control when a bias current is send to the TS_PIN, the
GP_ADC has its own pin and a separate bit in another register to
control the bias current.

Not only does changing when to enable the TS_PIN bias current
(always or only when sampling) when reading the GP_ADC make no sense
at all, the code is modifying these bits is writing the entire register,
assuming that all the other bits have their default value.

So if the firmware has configured a different bias-current for either
pin, then that change gets clobbered by the write, likewise if the
firmware has set bit 2 to indicate that the battery has no thermal sensor,
this will get clobbered by the write.

This commit fixes all this, by simply removing all writes to the
AXP288_ADC_TS_PIN_CTRL register, they are not needed to read the
GP_ADC pin, and can actually be harmful.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:addac:adt7316 Fixes Alignment should match open parenthesis

Fixes style issue where Alignment doesn't match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: imx25-gcq: Fix module autoload

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/iio/adc/fsl-imx25-gcq.ko | grep alias
$

After this patch:

$ modinfo drivers/iio/adc/fsl-imx25-gcq.ko | grep alias
alias:          of:N*T*Cfsl,imx25-gcqC*
alias:          of:N*T*Cfsl,imx25-gcq

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>