Andrzej Hajda [Thu, 24 Sep 2015 14:00:14 +0000 (11:00 -0300)]
[media] staging: media: omap4iss: fix handling platform_get_irq result
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Andrzej Hajda [Thu, 24 Sep 2015 14:00:18 +0000 (11:00 -0300)]
[media] cx231xx: fix handling cx231xx_read_i2c_data result
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Erik Andresen [Sat, 19 Sep 2015 17:30:30 +0000 (14:30 -0300)]
[media] Add Terratec H7 Revision 4 to DVBSky driver
Adds Terratec H7 Rev. 4 with USB id 0ccd:10a5 to DVBSky driver.
Signed-off-by: Erik Andresen <erik@vontaene.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Maciek Borzecki [Fri, 4 Sep 2015 20:04:04 +0000 (17:04 -0300)]
[media] staging: lirc: fix indentation
Fix non-tab indentation.
This resolves the following checkpatch problem:
ERROR: code indent should use tabs where possible
[mchehab@osg.samsung.com: remove a hunk already applyed by some other patch]
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Sun, 6 Sep 2015 10:11:48 +0000 (07:11 -0300)]
[media] VIDEO_RENESAS_JPU should depend on HAS_DMA
If NO_DMA=y:
warning: (VIDEO_STI_BDISP && VIDEO_RENESAS_JPU && VIDEO_DM365_VPFE && VIDEO_OMAP4) selects VIDEOBUF2_DMA_CONTIG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’:
drivers/media/v4l2-core/videobuf2-dma-contig.c:207: error: implicit declaration of function ‘dma_mmap_coherent’
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’:
drivers/media/v4l2-core/videobuf2-dma-contig.c:390: error: implicit declaration of function ‘dma_get_sgtable’
VIDEO_RENESAS_JPU selects VIDEOBUF2_DMA_CONTIG, which bypasses its
dependency on HAS_DMA. Make VIDEO_RENESAS_JPU depend on HAS_DMA to fix
this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Maciek Borzecki [Fri, 4 Sep 2015 20:04:05 +0000 (17:04 -0300)]
[media] staging: lirc: lirc_serial: use dynamic debugs
Replace custom debug macro dprintk() with pr_debug() or
dev_dbg(). Remove unused module param `debug`.
This removes the following checkpatch warning:
WARNING: Prefer [subsystem eg: netdev]_dbg([subsystem]dev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ...
+ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Graham Eccleston [Sun, 9 Aug 2015 14:38:07 +0000 (11:38 -0300)]
[media] Compro U650F support
Added Compro U650F to the rtl28xxu devices.
Signed-off-by: Graham Eccleston <grahameccleston_@hotmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 22:10:55 +0000 (19:10 -0300)]
[media] rcar_jpu: Fix namespace for two __be16 vars
Fixes those sparse warnings:
drivers/media/platform/rcar_jpu.c:1150:51: warning: incorrect type in assignment (different base types)
drivers/media/platform/rcar_jpu.c:1150:51: expected unsigned short [unsigned] [short] [usertype] <noident>
drivers/media/platform/rcar_jpu.c:1150:51: got restricted __be16 [usertype] <noident>
drivers/media/platform/rcar_jpu.c:1152:50: warning: incorrect type in assignment (different base types)
drivers/media/platform/rcar_jpu.c:1152:50: expected unsigned short [unsigned] [short] [usertype] <noident>
drivers/media/platform/rcar_jpu.c:1152:50: got restricted __be16 [usertype] <noident>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 22:07:32 +0000 (19:07 -0300)]
[media] c8sectpfe: fix namespace on memcpy/memset
Solves those sparse warnings:
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1087:9: warning: incorrect type in argument 1 (different address spaces)
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1087:9: expected void *<noident>
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1087:9: got void [noderef] <asn:2>*<noident>
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1090:9: warning: incorrect type in argument 1 (different address spaces)
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1090:9: expected void *<noident>
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1090:9: got void [noderef] <asn:2>*
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 22:05:46 +0000 (19:05 -0300)]
[media] mipi-csis: make sparse happy
Fix the namespace issue that causes this warning:
drivers/media/platform/exynos4-is/mipi-csis.c:709:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/platform/exynos4-is/mipi-csis.c:709:17: expected void const *<noident>
drivers/media/platform/exynos4-is/mipi-csis.c:709:17: got void [noderef] <asn:2>*
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 22:02:45 +0000 (19:02 -0300)]
[media] netup_unidvb_ci: Fix dereference of noderef expression
Fix those sparse warnings:
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:150:40: warning: dereference of noderef expression
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:165:31: warning: dereference of noderef expression
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:174:36: warning: dereference of noderef expression
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:189:27: warning: dereference of noderef expression
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 21:49:29 +0000 (18:49 -0300)]
[media] netup_unidvb: remove most of the sparse warnings
There is a mess at the namespace on netup_unidvb:
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:192:41: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:192:41: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:192:41: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:194:26: warning: cast removes address space of expression
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:194:26: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:194:26: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:194:26: got unsigned short [usertype] *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:196:41: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:196:41: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:196:41: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:198:26: warning: cast removes address space of expression
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:198:26: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:198:26: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:198:26: got unsigned short [usertype] *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:210:37: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:210:37: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:210:37: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:211:32: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:211:32: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:211:32: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:213:33: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:213:33: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:213:33: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:528:49: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:528:49: expected void const volatile [noderef] <asn:2>*src
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:528:49: got unsigned char [usertype] *
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:541:49: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:541:49: expected void const volatile [noderef] <asn:2>*src
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:541:49: got unsigned char [usertype] *
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:647:22: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:647:22: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:647:22: got unsigned char [usertype] *addr_virt
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:650:22: warning: cast removes address space of expression
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:654:59: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:654:59: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:654:59: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:655:56: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:655:56: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:655:56: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:656:23: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:656:23: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:656:23: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:658:31: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:658:31: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:658:31: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:660:33: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:660:33: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:660:33: got restricted __le32 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:81:25: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:81:25: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:81:25: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:82:38: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:82:38: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:82:38: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:104:33: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:104:33: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:104:33: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:105:47: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:105:47: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:105:47: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:112:33: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:112:33: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:112:33: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:113:47: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:113:47: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:113:47: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:132:36: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:132:36: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:132:36: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:133:32: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:133:32: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:133:32: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:134:32: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:134:32: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:134:32: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:135:32: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:135:32: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:135:32: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:136:27: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:136:27: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:136:27: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:137:27: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:137:27: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:137:27: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:144:28: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:144:28: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:144:28: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:150:34: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:150:34: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:150:34: got unsigned char *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:157:34: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:157:34: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:157:34: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:158:29: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:158:29: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:158:29: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:165:35: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:165:35: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:165:35: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:170:34: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:170:34: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:170:34: got unsigned char *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:181:34: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:181:34: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:181:34: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:182:29: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:182:29: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:182:29: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:189:29: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:189:29: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:189:29: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:191:37: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:191:37: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:191:37: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:192:35: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:192:35: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:192:35: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:194:21: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:194:21: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:194:21: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:195:9: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:205:47: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:205:47: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:205:47: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:206:29: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:206:29: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:206:29: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:272:53: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:272:53: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:272:53: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:274:53: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:274:53: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:274:53: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c:323:22: warning: cast removes address space of expression
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:229:38: warning: cast removes address space of expression
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:229:38: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:229:38: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_ci.c:229:38: got unsigned short [usertype] *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:89:25: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:89:25: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:89:25: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:96:46: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:96:46: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:96:46: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:97:25: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:97:25: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:97:25: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:98:49: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:98:49: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:98:49: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:116:44: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:116:44: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:116:44: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:117:23: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:117:23: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:117:23: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:132:48: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:132:48: expected void volatile [noderef] <asn:2>*dst
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:132:48: got unsigned char *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:136:46: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:136:46: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:136:46: got unsigned char *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:144:37: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:144:37: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:144:37: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:145:25: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:145:25: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:145:25: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:154:52: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:154:52: expected void const volatile [noderef] <asn:2>*src
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:154:52: got unsigned char *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:205:23: warning: cast removes address space of expression
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:206:24: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:206:24: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:206:24: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:243:25: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:243:25: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:243:25: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:244:46: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:244:46: expected void volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:244:46: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:245:25: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:245:25: expected void const volatile [noderef] <asn:2>*addr
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:245:25: got restricted __le16 *<noident>
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:246:49: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c:246:49: expected void volatile [noderef] <asn:2>*addr
Fix the above sparse warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 21:12:39 +0000 (18:12 -0300)]
[media] s5c73m3: fix a sparse warning
drivers/media/i2c/s5c73m3/s5c73m3-core.c:170:39: warning: incorrect type in argument 1 (different base types)
drivers/media/i2c/s5c73m3/s5c73m3-core.c:170:39: expected restricted __be16 const [usertype] *p
drivers/media/i2c/s5c73m3/s5c73m3-core.c:170:39: got unsigned short [usertype] *<noident>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 21:07:53 +0000 (18:07 -0300)]
[media] media-entity.c: get rid of var length arrays
Fix those sparse warnings:
drivers/media/media-entity.c:238:17: warning: Variable length array is used.
drivers/media/media-entity.c:239:17: warning: Variable length array is used.
That allows sparse and other code check tools to verify if the
function is using more stack than allowed.
It also solves a bad Kernel pratice of using var length arrays
at the stack.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 18:48:19 +0000 (15:48 -0300)]
Revert "[media] rcar_vin: call g_std() instead of querystd()"
As pointed by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
this patch depends on two adv7180 patches that got rejected.
This reverts commit
f00ae754c536511055ed6162778be8348e093514.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 17:23:35 +0000 (14:23 -0300)]
[media] DocBook: Remove a warning at videobuf2-v4l2.h
There's no need to document to_foo() macros, and the macro is
badly documented anyway. That removes this warning:
include/media/videobuf2-v4l2.h:43: warning: No description found for parameter 'vb'
While here, remove the parenthesis for container_of(). The
countainer_of() already have parenthesis inside it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 16:59:29 +0000 (13:59 -0300)]
[media] DocBook: fix most of warnings at videobuf2-core.h
include/media/videobuf2-core.h:112: warning: No description found for parameter 'get_dmabuf'
include/media/videobuf2-core.h:146: warning: No description found for parameter 'm'
include/media/videobuf2-core.h:146: warning: Excess struct/union/enum/typedef member 'mem_offset' description in 'vb2_plane'
There are still several warnings, but those are hard to fix,
as they're actually a bug at DocBook. Those should be fixed on
separate patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 12:35:01 +0000 (09:35 -0300)]
[media] DocBook: Fix documentation for struct v4l2_dv_timings
Fix this warning:
include/media/v4l2-dv-timings.h:29: warning: cannot understand function prototype: 'const struct v4l2_dv_timings v4l2_dv_timings_presets[]; '
Unfortunately, currently, it seems that doc-nano doesn't support
documenting extern static vars.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 12:14:57 +0000 (09:14 -0300)]
[media] dvbdev: Remove two cut-and-paste errors
Those two came from dvb_register_adapter cut-and-paste:
.//drivers/media/dvb-core/dvbdev.h:199: warning: Excess function parameter 'device' description in 'dvb_register_device'
.//drivers/media/dvb-core/dvbdev.h:199: warning: Excess function parameter 'adapter_nums' description in 'dvb_register_device'
Remove them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 12:12:23 +0000 (09:12 -0300)]
[media] DocBook: add the new videobuf2-v4l2 header
This header should also be used to generate documentation. So,
add it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Thu, 1 Oct 2015 12:10:06 +0000 (09:10 -0300)]
[media] s5p-jpeg: remove unused var
changeset
6c96dbbc2aa9 added a new function that seems to be
a modified version of an existing function. That's ok, but
it was adding a "word" var from the previous code that it is
not used on the new function. So, remove this left-over.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Junghak Sung [Tue, 22 Sep 2015 13:30:30 +0000 (10:30 -0300)]
[media] media: videobuf2: Restructure vb2_buffer
Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer.
Add new member variables - bytesused, length, offset, userptr, fd,
data_offset - to struct vb2_plane in order to cover all information
of v4l2_plane.
struct vb2_plane {
<snip>
unsigned int bytesused;
unsigned int length;
union {
unsigned int offset;
unsigned long userptr;
int fd;
} m;
unsigned int data_offset;
}
Replace v4l2_buf with new member variables - index, type, memory - which
are common fields for buffer management.
struct vb2_buffer {
<snip>
unsigned int index;
unsigned int type;
unsigned int memory;
unsigned int num_planes;
struct vb2_plane planes[VIDEO_MAX_PLANES];
<snip>
};
v4l2 specific fields - flags, field, timestamp, timecode,
sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c
struct vb2_v4l2_buffer {
struct vb2_buffer vb2_buf;
__u32 flags;
__u32 field;
struct timeval timestamp;
struct v4l2_timecode timecode;
__u32 sequence;
};
Signed-off-by: Junghak Sung <jh1009.sung@samsung.com>
Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Junghak Sung [Tue, 22 Sep 2015 13:30:29 +0000 (10:30 -0300)]
[media] media: videobuf2: Replace videobuf2-core with videobuf2-v4l2
Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use.
And replace videobuf2-core.h with videobuf2-v4l2.h.
This renaming change should be accompanied by the modifications
of all device drivers that include videobuf2-core.h.
It can be done with just running this shell script.
replace()
{
str1=$1
str2=$2
dir=$3
for file in $(find $dir -name *.h -o -name *.c -o -name Makefile)
do
echo $file
sed "s/$str1/$str2/g" $file > $file.out
mv $file.out $file
done
}
replace "videobuf2-core" "videobuf2-v4l2" "include/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/"
Signed-off-by: Junghak Sung <jh1009.sung@samsung.com>
Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Benoit Parrot [Mon, 21 Sep 2015 16:03:21 +0000 (13:03 -0300)]
[media] media: v4l2-ctrls: Fix 64bit support in get_ctrl()
When trying to use v4l2_ctrl_g_ctrl_int64() to retrieve a
V4L2_CTRL_TYPE_INTEGER64 type value the internal helper function
get_ctrl() would prematurely exit because for this control type
the 'is_int' flag is not set. This would result in v4l2_ctrl_g_ctrl_int64
always returning 0.
Also v4l2_ctrl_g_ctrl_int64() is reading and returning the 32bit value
member instead of the 64bit version, so fixing that as well.
This patch extends the condition check to allow the V4L2_CTRL_TYPE_INTEGER64
type to continue processing instead of exiting.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.17 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Luis de Bethencourt [Mon, 21 Sep 2015 16:00:41 +0000 (13:00 -0300)]
[media] cx25821, cx88, tm6000: use SNDRV_DEFAULT_ENABLE_PNP
Instead of manually initializing the bool array enable, use the
SNDRV_DEFAULT_ENABLE_PNP macro. As most drivers do.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 21 Sep 2015 11:42:04 +0000 (08:42 -0300)]
[media] cobalt: fix Kconfig dependency
The cobalt driver should depend on VIDEO_V4L2_SUBDEV_API.
This fixes this kbuild error:
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head:
99bc7215bc60f6cd414cf1b85cd9d52cc596cccb
commit:
85756a069c55e0315ac5990806899cfb607b987f [media] cobalt: add new driver
config: x86_64-randconfig-s0-
09201514 (attached as .config)
reproduce:
git checkout
85756a069c55e0315ac5990806899cfb607b987f
# save the attached .config to linux build tree
make ARCH=x86_64
All error/warnings (new ones prefixed by >>):
drivers/media/i2c/adv7604.c: In function 'adv76xx_get_format':
>> drivers/media/i2c/adv7604.c:1853:9: error: implicit declaration of function 'v4l2_subdev_get_try_format' [-Werror=implicit-function-declaration]
fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
^
drivers/media/i2c/adv7604.c:1853:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
^
drivers/media/i2c/adv7604.c: In function 'adv76xx_set_format':
drivers/media/i2c/adv7604.c:1882:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
^
cc1: some warnings being treated as errors
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Javier Martinez Canillas [Mon, 21 Sep 2015 11:23:09 +0000 (08:23 -0300)]
[media] tvp5150: add support for asynchronous probing
Allow the subdevice to be probed asynchronously.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Joe Perches [Sun, 2 Aug 2015 20:30:53 +0000 (17:30 -0300)]
[media] s5p-mfc: Correct misuse of %0x<decimal>
Correct misuse of 0x%d in logging message.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Andrzej Pietrasiewicz [Fri, 18 Sep 2015 14:20:59 +0000 (11:20 -0300)]
[media] MAINTAINERS: add exynos jpeg codec maintainers
Add Andrzej Pietrasiewicz and Jacek Anaszewski
as maintainers of drivers/media/platform/s5p-jpeg.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Andrzej Pietrasiewicz [Fri, 18 Sep 2015 14:20:58 +0000 (11:20 -0300)]
[media] s5p-jpeg: add support for 5433
JPEG IP found in Exynos5433 is similar to what is in Exynos4, but
there are some subtle differences which this patch takes into account.
The most important difference is in what is processed by the JPEG IP and
what has to be provided to it. In case of 5433 the IP does not parse
Huffman and quantisation tables, so this has to be performed with the CPU
and the majority of the code in this patch does that.
A small but important difference is in what address is passed to the JPEG
IP. In case of 5433 it is the SOS (start of scan) position, which is
natural, because the headers must be parsed elsewhere.
There is also a difference in how the hardware is put to work in
device_run.
Data structures are extended as appropriate to accommodate the above
changes.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Reviewed-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Marek Szyprowski [Fri, 18 Sep 2015 14:20:57 +0000 (11:20 -0300)]
[media] s5p-jpeg: generalize clocks handling
Allow jpeg codec variants declare clocks they need.
Before this patch is applied jpeg-core gets jpeg->sclk
"speculatively": if it is not there, we assume no problem.
This patch eliminates this by explicitly declaring
what clocks are needed for each variant.
This is a preparation for adding Exynos 5433 variant support, which
needs 4 clocks of names not compatible with any previous version of
jpeg hw module.
[Rebase and commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Reviewed-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Javier Martinez Canillas [Wed, 16 Sep 2015 23:55:04 +0000 (20:55 -0300)]
[media] go7007: Fix returned errno code in gen_mjpeghdr_to_package()
The driver is using -1 instead of the -ENOMEM defined macro to specify
that a buffer allocation failed. Since the error number is propagated,
the caller will get a -EPERM which is the wrong error condition.
Also, the smatch tool complains with the following warning:
gen_mjpeghdr_to_package() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Javier Martinez Canillas [Fri, 11 Sep 2015 10:53:09 +0000 (07:53 -0300)]
[media] s5c73m3: Export OF module alias information
The SPI core always reports the MODALIAS uevent as "spi:<modalias>"
regardless of the mechanism that was used to register the device
(i.e: OF or board code) and the table that is used later to match
the driver with the device (i.e: SPI id table or OF match table).
So drivers needs to export the SPI id table and this be built into
the module or udev won't have the necessary information to autoload
the needed driver module when the device is added.
But this means that OF-only drivers needs to have both OF and SPI id
tables that have to be kept in sync and also the dev node compatible
manufacturer prefix is stripped when reporting the MODALIAS. Which can
lead to issues if two vendors use the same SPI device name for example.
To avoid the above, the SPI core behavior may be changed in the future
to not require an SPI device table for OF-only drivers and report the
OF module alias. So, it's better to also export the OF table even when
is unused now to prevent breaking module loading when the core changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 21 Sep 2015 09:21:55 +0000 (06:21 -0300)]
[media] DocBook/media: clarify control documentation
- Add missing V4L2_CTRL_TYPE_U32 documentation
- Remove 'which are actually different on the hardware' sentence which
is confusing. I think the idea was to let the user know that the step can
be different for different hardware, but that's obvious because otherwise
you wouldn't need to specify the step value.
- Clarify that V4L2_CTRL_COMPOUND_TYPES also applies to arrays.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 21 Sep 2015 09:14:16 +0000 (06:14 -0300)]
[media] v4l2-ctrls: arrays are also considered compound controls
Array controls weren't skipped when only V4L2_CTRL_FLAG_NEXT_CTRL was
provided (so no V4L2_CTRL_FLAG_NEXT_COMPOUND was set). This is wrong
since arrays are also considered compound controls (i.e. with more than
one value), and applications that do not know about arrays will not
be able to handle such controls.
Fix the test to include arrays.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Cc: <stable@vger.kernel.org> # for v3.17 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Arnd Bergmann [Thu, 17 Sep 2015 21:19:37 +0000 (18:19 -0300)]
[media] use v4l2_get_timestamp where possible
This is a preparation for a change to the type of v4l2 timestamps.
v4l2_get_timestamp() is a helper function that reads the monotonic
time and stores it into a 'struct timeval'. Multiple drivers implement
the same thing themselves for historic reasons.
Changing them all to use v4l2_get_timestamp() is more consistent
and reduces the amount of code duplication, and most importantly
simplifies the following changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
[hans.verkuil@cisco.com: dropped the v4l2-dev.c patch that didn't belong here]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Arnd Bergmann [Thu, 17 Sep 2015 21:19:35 +0000 (18:19 -0300)]
[media] exynos4-is: use monotonic timestamps as advertized
The exynos4 fimc capture driver claims to use monotonic
timestamps but calls ktime_get_real_ts(). This is both
an incorrect API use, and a bad idea because of the y2038
problem and the fact that the wall clock time is not reliable
for timestamps across suspend or settimeofday().
This changes the driver to use the normal v4l2_get_timestamp()
function like all other drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sergei Shtylyov [Thu, 3 Sep 2015 23:16:34 +0000 (20:16 -0300)]
[media] ml86v7667: implement g_std() method
The driver was written with the 'soc_camera' use in mind, however the g_std()
video method was forgotten. Implement it at last...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:33 +0000 (08:48 -0300)]
[media] saa7164: video and vbi ports share the same input/tuner/std
The vbi port should pass any tuner/input/standard information on
to the video port since in the input and tuner are shared between
the two.
There is no reason to duplicate this code, just pass the ioctls on
to the video encoder port.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:32 +0000 (08:48 -0300)]
[media] saa7164: fix input and tuner compliance problems
- the frequency range was never set
- there was no initial frequency
- missing index/tuner checks
- inconsistent standard reporting
- removed unnecessary tuner type checks (the core handles that)
- clamp frequency to the valid frequency range as per the V4L2 spec
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:31 +0000 (08:48 -0300)]
[media] saa7164: remove unused videobuf references
This driver includes videobuf headers and selects VIDEOBUF_DVB, but
videobuf isn't used at all.
Remove this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:30 +0000 (08:48 -0300)]
[media] saa7164: fix format ioctls
Fix various v4l2-compliance issues in the formatting ioctls:
- the vbi device implemented video format ioctls which make no senses
for a vbi device, remove them.
- remove the unused ts_packet_size and ts_packet_count fields.
- fill in colorspace and field.
- fill in sizeimage with a default value.
- for the video node the get, set and try format functions all do the
same thing, so combine into a single function.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:29 +0000 (08:48 -0300)]
[media] saa7164: add support for control events
Now that saa7164 uses v4l2_fh and that poll() has been fixed, it is
trivial to add support for control events.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:28 +0000 (08:48 -0300)]
[media] saa7164: fix poll bugs
- poll doesn't return negative values, so you can't return -EINVAL.
Instead return POLLERR.
- poll can't be called if !video_is_registered(), so this test can
be dropped.
- poll can never do a blocking wait, so remove that check.
- poll shouldn't attempt to start streaming if the caller isn't interested
in read events.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:27 +0000 (08:48 -0300)]
[media] saa7164: add v4l2_fh support
Control events require the use of struct v4l2_fh. Add this to saa7164.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 28 Aug 2015 11:48:26 +0000 (08:48 -0300)]
[media] saa7164: convert to the control framework
Convert this driver to the control framework. Note that the VBI device
nodes have no controls as there is nothing to control.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ricardo Ribalda [Fri, 21 Aug 2015 13:19:22 +0000 (10:19 -0300)]
[media] media/v4l2-compat-ioctl32: Simple stylechecks
The next patches on the series need this modifications to pass clean
checkpath.pl.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ricardo Ribalda [Fri, 21 Aug 2015 13:19:20 +0000 (10:19 -0300)]
[media] videodev2.h: Fix typo in comment
Referenced file has moved
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 21 Sep 2015 08:31:19 +0000 (05:31 -0300)]
[media] vivid: add 10 and 12 bit Bayer formats
Add support for 10 and 12 bit Bayer formats to the test pattern generator
and the vivid driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Thu, 17 Sep 2015 09:46:04 +0000 (06:46 -0300)]
[media] v4l2-compat-ioctl32: add missing SDR support
Add the missing support for v4l2_sdr_format (V4L2_BUF_TYPE_SDR_CAPTURE).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geliang Tang [Tue, 15 Sep 2015 12:36:01 +0000 (09:36 -0300)]
[media] media: fix kernel-doc warnings in v4l2-dv-timings.h
Fix the following 'make htmldocs' warnings:
.//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'frame_height'
.//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'hfreq'
.//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'vsync'
.//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'active_width'
.//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'polarities'
.//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'interlaced'
.//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'fmt'
.//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'frame_height'
.//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'hfreq'
.//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'vsync'
.//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'polarities'
.//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'interlaced'
.//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'aspect'
.//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'fmt'
.//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'hor_landscape'
.//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'vert_portrait'
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Tue, 15 Sep 2015 06:49:44 +0000 (03:49 -0300)]
[media] vim2m: small cleanup: use assignment instead of memcpy
Use a type-safe assignment instead of memcpy. And it is easier to read as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 19:15:21 +0000 (16:15 -0300)]
[media] DocBook media: Document the SMPTE 2084 transfer function
Document this new transfer function used by High Dynamic Range content.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 19:15:20 +0000 (16:15 -0300)]
[media] vivid: add support for SMPTE 2084 transfer function
Support the new SMPTE 2084 transfer function in the vivid test driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 19:15:19 +0000 (16:15 -0300)]
[media] vivid-tpg: add support for SMPTE 2084 transfer function
Support the new SMPTE 2084 transfer function in the test pattern generator.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 19:15:18 +0000 (16:15 -0300)]
[media] videodev2.h: add SMPTE 2084 transfer function define
CEA-861.3 adds support for the SMPTE 2084 Electro-Optical Transfer Function
as can be used in HDR displays. Add a define for this in videodev2.h.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 16:41:32 +0000 (13:41 -0300)]
[media] vivid: add support for the DCI-P3 colorspace
Support this new colorspace in vivid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 16:41:31 +0000 (13:41 -0300)]
[media] vivid-tpg: support the DCI-P3 colorspace
Add support to the test pattern generator for the DCI-P3 colorspace.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 16:41:30 +0000 (13:41 -0300)]
[media] DocBook media: document the new DCI-P3 colorspace
Document this colorspace.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 16:41:29 +0000 (13:41 -0300)]
[media] videodev2.h: add support for the DCI-P3 colorspace
This colorspace is used for cinema projectors and is supported by
the DisplayPort standard.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 16:41:28 +0000 (13:41 -0300)]
[media] vivid: use Bradford method when converting Rec. 709 to NTSC 1953
The V4L2_COLORSPACE_470_SYSTEM_M (aka NTSC 1953) colorspace has a different
whitepoint (C) compared to Rec. 709 (D65). The Bradford method is the
recommended method to compensate for that when converting a Rec. 709 color
to an NTSC 1953 color.
See http://www.brucelindbloom.com/index.html?Eqn_ChromAdapt.html for more
details on the Bradford method.
This patch updates the Rec. 709 to NTSC 1953 matrix so that it includes the
chromatic adaptation as calculated by the Bradford method, and it recalculates
the tpg_csc_colors table accordingly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sun, 13 Sep 2015 16:41:27 +0000 (13:41 -0300)]
[media] vivid: use ARRAY_SIZE to calculate max control value
The max value of various menu controls is hardcoded, and it is easy to forget
to update it after adding a new menu item.
So use ARRAY_SIZE instead to calculate this value.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Wed, 9 Sep 2015 06:40:39 +0000 (03:40 -0300)]
[media] v4l2-compat-ioctl32: replace pr_warn by pr_debug
Every time compat32 encounters an unknown ioctl it will call pr_warn.
However, that's very irritating since it is perfectly normal that this
happens. For example, applications often try to call an ioctl to see if
it exists, and if that's used with an older kernel where compat32 doesn't
support that ioctl yet, then it starts spamming the kernel log.
So replace pr_warn by pr_debug.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Josh Wu [Tue, 4 Aug 2015 09:37:49 +0000 (06:37 -0300)]
[media] atmel-isi: parse the DT parameters for vsync/hsync/pixclock polarity
This patch will get the DT parameters of vsync/hsync/pixclock polarity, and
pass to driver.
Also add a debug information for test purpose.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laurent Pinchart [Sat, 1 Aug 2015 09:22:56 +0000 (06:22 -0300)]
[media] v4l: atmel-isi: Remove unused platform data fields
The emb_crc_sync, mck_hz, asd and asd_sizes platform data fields are
unused, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laurent Pinchart [Sat, 1 Aug 2015 09:22:54 +0000 (06:22 -0300)]
[media] v4l: atmel-isi: Remove support for platform data
All in-tree users have migrated to DT, remove support for platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[josh.wu@atmel.com: squash the commit to remove the unused variable: dev]
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laurent Pinchart [Sat, 1 Aug 2015 09:22:53 +0000 (06:22 -0300)]
[media] v4l: atmel-isi: Simplify error handling during DT parsing
Put the endpoint DT node earlier to avoid the need for goto statements
to a cleanup code block in case of errors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Josh Wu [Fri, 11 Sep 2015 07:00:16 +0000 (04:00 -0300)]
[media] atmel-isi: add sanity check for supported formats in try/set_fmt()
After adding the format check in try_fmt()/set_fmt(), we don't need any
format check in configure_geometry(). So make configure_geometry() as
void type.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Josh Wu [Fri, 11 Sep 2015 07:00:15 +0000 (04:00 -0300)]
[media] atmel-isi: move configure_geometry() to start_streaming()
As in set_fmt() function we only need to know which format is been set,
we don't need to access the ISI hardware in this moment.
So move the configure_geometry(), which access the ISI hardware, to
start_streaming() will make code more consistent and simpler.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Josh Wu [Fri, 11 Sep 2015 07:00:14 +0000 (04:00 -0300)]
[media] atmel-isi: setup the ISI_CFG2 register directly
In the function configure_geometry(), we will setup the ISI CFG2
according to the sensor output format.
It make no sense to just read back the CFG2 register and just set part
of it.
So just set up this register directly makes things simpler.
Currently only support YUV format from camera sensor.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Josh Wu [Wed, 17 Jun 2015 10:27:08 +0000 (07:27 -0300)]
[media] atmel-isi: increase timeout to disable/enable isi
If ISI is working on a 1024x768 or higher resolution, it needs longer
time to disable ISI. So this patch will increase timeout to 500ms.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Sun, 6 Sep 2015 10:08:49 +0000 (07:08 -0300)]
[media] atmel-isi: Protect PM-only functions to kill warning
If CONFIG_PM=n:
drivers/media/platform/soc_camera/atmel-isi.c:1044: warning: 'atmel_isi_runtime_suspend' defined but not used
drivers/media/platform/soc_camera/atmel-isi.c:1054: warning: 'atmel_isi_runtime_resume' defined but not used
Protect the unused functions by #ifdef CONFIG_PM to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sergei Shtylyov [Thu, 3 Sep 2015 23:18:05 +0000 (20:18 -0300)]
[media] rcar_vin: call g_std() instead of querystd()
Hans Verkuil says: "The only place querystd can be called is in the QUERYSTD
ioctl, all other ioctls should use the last set standard." So call the g_std()
subdevice method instead of querystd() in the driver's set_fmt() method.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sergei Shtylyov [Tue, 1 Sep 2015 22:29:01 +0000 (19:29 -0300)]
[media] rcar_vin: propagate querystd() error upstream
rcar_vin_set_fmt() defaults to PAL when the subdevice's querystd() method call
fails (e.g. due to I2C error). This doesn't work very well when a camera being
used outputs NTSC which has different order of fields and resolution. Let us
stop pretending and return the actual error except when the querystd() method
is not implemented, in which case we'll have to set the 'field' variable to
V4L2_FIELD_NONE.
Note that doing this would prevent video capture on at least Renesas Henninger/
Porter boards where I2C seems particularly buggy.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Tue, 23 Jun 2015 12:59:43 +0000 (09:59 -0300)]
[media] rcar_vin: Remove obsolete r8a779x-vin platform_device_id entries
Since commit
a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds. The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Josh Wu [Tue, 4 Aug 2015 10:51:09 +0000 (07:51 -0300)]
[media] soc-camera: increase the length of clk_name on soc_of_bind()
Since in soc_of_bind() it may use the of node's full name as the clk_name,
and this full name may be longer than 32 characters, take at91 i2c sensor
as an example, length is 34 bytes:
/ahb/apb/i2c@
f8028000/camera@0x30
So this patch increase the clk_name[] array size to 64. It seems big
enough so far.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laurent Pinchart [Mon, 27 Jul 2015 14:06:48 +0000 (11:06 -0300)]
[media] uvcvideo: Disable hardware timestamps by default
The hardware timestamping implementation has been reported as not
working correctly on at least the Logitech C920. Until this can be
fixed, disable it by default.
Reported-by: Peter Rabbitson <rabbit@rabbit.us>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 1 Sep 2015 23:04:51 +0000 (20:04 -0300)]
[media] vivid: sdr cap: few enhancements
* Constify struct
* Fix comments
* Fix alignment
* Use modulus to transfer phase angles
* Correct float [-1.0, +1.0] to s8 [-128, 127] conversion
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 1 Sep 2015 23:04:50 +0000 (20:04 -0300)]
[media] vivid: SDR cap: add control for FM deviation
Add user control to adjust generated FM deviation.
Default it to 75kHz like public FM radio broadcast.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Andrzej Hajda [Mon, 31 Aug 2015 11:56:15 +0000 (08:56 -0300)]
[media] v4l2-compat-ioctl32: fix alignment for ARM64
Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match
compatible ioctls on ARM64 kernels without breaking AMD64 some fields
should be aligned using compat_s64 type and in one case struct should be
unpacked.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: <stable@vger.kernel.org> # for v3.10 and up
[hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Darek Zielski [Thu, 27 Aug 2015 22:18:54 +0000 (19:18 -0300)]
[media] saa7134: add Leadtek Winfast TV2100 FM card support
Add Leadtek Winfast TV2100 FM card to saa7134 driver. It is a card bearing
SAA7130HL chip.
Signed-off-by: Darek Zielski <dz1125tor@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Alexander Kuleshov [Wed, 26 Aug 2015 19:06:11 +0000 (16:06 -0300)]
[media] media/pci/cobalt: Use %*ph to print small buffers
printk() supports %*ph format specifier for printing a small buffers,
let's use it intead of %02x %02x...
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Zahari Doychev [Mon, 17 Aug 2015 10:13:53 +0000 (07:13 -0300)]
[media] m2m: fix bad unlock balance
This patch removes unnecessary mutex queue unlock/lock sequence causing bad
unlock balance in v4l2_m2m_poll when the last buffer on the destination
queue has been dequeued and adds spin lock protection for the done list
list_empty calls.
[ 144.990873] =====================================
[ 144.995584] [ BUG: bad unlock balance detected! ]
[ 145.000301]
4.1.0-00137-ga105070 #98 Tainted: G W
[ 145.006140] -------------------------------------
[ 145.010851] demux:sink/487 is trying to release lock (&dev->dev_mutex) at:
[ 145.017785] [<
808cc578>] mutex_unlock+0x18/0x1c
[ 145.022322] but there are no more locks to release!
[ 145.027205]
[ 145.027205] other info that might help us debug this:
[ 145.033741] no locks held by demux:sink/487.
[ 145.038015]
[ 145.038015] stack backtrace:
[ 145.042385] CPU: 2 PID: 487 Comm: demux:sink Tainted: G W
4.1.0-00137-ga105070 #98
[ 145.051089] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 145.057622] Backtrace:
[ 145.060102] [<
80014a4c>] (dump_backtrace) from [<
80014cc4>] (show_stack+0x20/0x24)
[ 145.067679] r6:
80cedf78 r5:
00000000 r4:
00000000 r3:
00000000
[ 145.073421] [<
80014ca4>] (show_stack) from [<
808c61e0>] (dump_stack+0x8c/0xa4)
[ 145.080661] [<
808c6154>] (dump_stack) from [<
80072b64>] (print_unlock_imbalance_bug+0xb8/0xe8)
[ 145.089277] r6:
808cc578 r5:
ac6cd050 r4:
ac38e400 r3:
00000001
[ 145.095020] [<
80072aac>] (print_unlock_imbalance_bug) from [<
80077db4>] (lock_release+0x1a4/0x250)
[ 145.103983] r6:
808cc578 r5:
ac6cd050 r4:
ac38e400 r3:
00000000
[ 145.109728] [<
80077c10>] (lock_release) from [<
808cc470>] (__mutex_unlock_slowpath+0xc4/0x1b4)
[ 145.118344] r9:
acb27a41 r8:
00000000 r7:
81553814 r6:
808cc578 r5:
60030013 r4:
ac6cd01c
[ 145.126190] [<
808cc3ac>] (__mutex_unlock_slowpath) from [<
808cc578>] (mutex_unlock+0x18/0x1c)
[ 145.134720] r7:
00000000 r6:
aced7cd4 r5:
00000041 r4:
acb87800
[ 145.140468] [<
808cc560>] (mutex_unlock) from [<
805a98b8>] (v4l2_m2m_fop_poll+0x5c/0x64)
[ 145.148494] [<
805a985c>] (v4l2_m2m_fop_poll) from [<
805955a0>] (v4l2_poll+0x6c/0xa0)
[ 145.156243] r6:
aced7bec r5:
00000000 r4:
ac6cc380 r3:
805a985c
[ 145.161991] [<
80595534>] (v4l2_poll) from [<
80156edc>] (do_sys_poll+0x230/0x4c0)
[ 145.169391] r5:
00000000 r4:
aced7be4
[ 145.173013] [<
80156cac>] (do_sys_poll) from [<
801574a8>] (SyS_ppoll+0x1d4/0x1fc)
[ 145.180414] r10:
00000000 r9:
aced6000 r8:
00000000 r7:
00000000 r6:
75c04538 r5:
00000002
[ 145.188338] r4:
00000000
[ 145.190906] [<
801572d4>] (SyS_ppoll) from [<
800108c0>] (ret_fast_syscall+0x0/0x54)
[ 145.198481] r8:
80010aa4 r7:
00000150 r6:
75c04538 r5:
00000002 r4:
00000008
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Nicolas Sugino [Fri, 14 Aug 2015 17:36:11 +0000 (14:36 -0300)]
[media] ivtv-alsa: Add index to specify device number
When using multiple capture cards, it might be necessary to identify a
specific device with an ALSA one. If not, the order of the ALSA devices
might have no relation to the id of the radio or video device.
Signed-off-by: Nicolas Sugino <nsugino@3way.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Andrew Milkovich [Fri, 14 Aug 2015 16:43:56 +0000 (13:43 -0300)]
[media] Staging: media: bcm2048: warnings for uninitialized variables fixed
This patch fixes the following sparse warnings:
warning: ... may be used uninitialized in this function
Some function variables have been initialized to 0.
Signed-off-by: Andrew Milkovich <amilkovich@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Sun, 13 Sep 2015 14:10:12 +0000 (11:10 -0300)]
Merge tag 'v4.3-rc1' into patchwork
Linux 4.3-rc1
* tag 'v4.3-rc1': (11838 commits)
Linux 4.3-rc1
blk: rq_data_dir() should not return a boolean
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
thermal: fix intel PCH thermal driver mismerge
ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs
revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
mm/early_ioremap: add explicit #include of asm/early_ioremap.h
fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
selftests: enhance membarrier syscall test
selftests: add membarrier syscall test
sys_membarrier(): system-wide memory barrier (generic, x86)
MODSIGN: fix a compilation warning in extract-cert
Revert "writeback: plug writeback at a high level"
scsi_dh: fix randconfig build error
target: use stringify.h instead of own definition
target/user: Fix UFLAG_UNKNOWN_OP handling
target: Remove no-op conditional
target/user: Remove unused variable
target: Fix max_cmd_sn increment w/o cmdsn mutex regressions
target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess
...
Linus Torvalds [Sat, 12 Sep 2015 23:35:56 +0000 (16:35 -0700)]
Linux 4.3-rc1
Linus Torvalds [Sat, 12 Sep 2015 19:24:29 +0000 (12:24 -0700)]
Merge tag 'cris-for-4.3' of git://git./linux/kernel/git/jesper/cris
Pull CRIS updates from Jesper Nilsson:
"Mostly removal of old cruft of which we can use a generic version, or
fixes for code not commonly run in the cris port, but also additions
to enable some good debug"
* tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits)
CRISv10: delete unused lib/dmacopy.c
CRISv10: delete unused lib/old_checksum.c
CRIS: fix switch_mm() lockdep splat
CRISv32: enable LOCKDEP_SUPPORT
CRIS: add STACKTRACE_SUPPORT
CRISv32: annotate irq enable in idle loop
CRISv32: add support for irqflags tracing
CRIS: UAPI: use generic types.h
CRIS: UAPI: use generic shmbuf.h
CRIS: UAPI: use generic msgbuf.h
CRIS: UAPI: use generic socket.h
CRIS: UAPI: use generic sembuf.h
CRIS: UAPI: use generic sockios.h
CRIS: UAPI: use generic auxvec.h
CRIS: UAPI: use generic headers via Kbuild
CRIS: UAPI: fix elf.h export
CRIS: don't make asm/elf.h depend on asm/user.h
CRIS: UAPI: fix ptrace.h
CRISv32: Squash compile warnings for axisflashmap
CRISv32: Add GPIO driver to the default configs
...
Linus Torvalds [Wed, 27 May 2015 22:32:15 +0000 (15:32 -0700)]
blk: rq_data_dir() should not return a boolean
rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
a boolean value.
Now, admittedly the "!= 0" doesn't really change the value (0 stays as
zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
causes gcc to warn about the construct
switch (rq_data_dir(req)) {
case READ:
...
case WRITE:
...
that we have in a few drivers.
Now, the gcc warning is silly and stupid (it seems to warn not about the
switch value having a different type from the case statements, but about
_any_ boolean switch value), but in this case the code itself is silly
and stupid too, so let's just change it, and get rid of warnings like
this:
drivers/block/hd.c: In function ‘hd_request’:
drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
switch (rq_data_dir(req)) {
The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
commit
5953316dbf90 ("block: make rq->cmd_flags be 64-bit") and is
presumably because the old code (that just did a logical 'and' with 1)
would then end up making the type of rq_data_dir() be u64 too.
But if we want to retain the old regular integer type, let's just cast
the result to 'int' rather than use that rather odd '!= 0'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 12 Sep 2015 18:19:01 +0000 (11:19 -0700)]
Merge branch 'writeback-plugging'
Fix up the writeback plugging introduced in commit
d353d7587d02
("writeback: plug writeback at a high level") that then caused problems
due to the unplug happening with a spinlock held.
* writeback-plugging:
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
Revert "writeback: plug writeback at a high level"
Linus Torvalds [Fri, 11 Sep 2015 20:37:19 +0000 (13:37 -0700)]
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
We had to revert the pluggin in writeback_sb_inodes() because the
wb->list_lock is held, but we could easily plug at a higher level before
taking that lock, and unplug after releasing it. This does that.
Chris will run performance numbers, just to verify that this approach is
comparable to the alternative (we could just drop and re-take the lock
around the blk_finish_plug() rather than these two commits.
I'd have preferred waiting for actual performance numbers before picking
one approach over the other, but I don't want to release rc1 with the
known "sleeping function called from invalid context" issue, so I'll
pick this cleanup version for now. But if the numbers show that we
really want to plug just at the writeback_sb_inodes() level, and we
should just play ugly games with the spinlock, we'll switch to that.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 12 Sep 2015 03:06:59 +0000 (20:06 -0700)]
thermal: fix intel PCH thermal driver mismerge
I didn't notice this when merging the thermal code from Zhang, but his
merge (commit
5a924a07f882: "Merge branches 'thermal-core' and
'thermal-intel' of .git into next") of the thermal-core and
thermal-intel branches was wrong.
In thermal-core, commit
17e8351a7739 ("thermal: consistently use int for
temperatures") converted the thermal layer to use "int" for
temperatures.
But in parallel, in the thermal-intel branch commit
d0a12625d2ff
("thermal: Add Intel PCH thermal driver") added support for the intel
PCH thermal sensor using the old interfaces that used "unsigned long"
pointers.
This resulted in warnings like this:
drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
.get_temp = pch_thermal_get_temp,
^
drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’)
drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
.get_trip_temp = pch_get_trip_temp,
^
drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’)
This fixes it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 12 Sep 2015 02:34:09 +0000 (19:34 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge fourth patch-bomb from Andrew Morton:
- sys_membarier syscall
- seq_file interface changes
- a few misc fixups
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
mm/early_ioremap: add explicit #include of asm/early_ioremap.h
fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
selftests: enhance membarrier syscall test
selftests: add membarrier syscall test
sys_membarrier(): system-wide memory barrier (generic, x86)
MODSIGN: fix a compilation warning in extract-cert
Vineet Gupta [Fri, 11 Sep 2015 23:32:22 +0000 (16:32 -0700)]
ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs
Newer bitfiles needs the reduced clk even for SMP builds
Cc: <stable@vger.kernel.org> #4.2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 12 Sep 2015 02:29:00 +0000 (19:29 -0700)]
Merge tag 'ntb-4.3' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"NTB bug and documentation fixes, new device IDs, performance
improvements, and adding a mailing list to MAINTAINERS for NTB"
* tag 'ntb-4.3' of git://github.com/jonmason/ntb:
NTB: Fix range check on memory window index
NTB: Improve index handling in B2B MW workaround
NTB: Fix documentation for ntb_peer_db_clear.
NTB: Fix documentation for ntb_link_is_up
NTB: Use unique DMA channels for TX and RX
NTB: Remove dma_sync_wait from ntb_async_rx
NTB: Clean up QP stats info
NTB: Make the transport list in order of discovery
NTB: Add PCI Device IDs for Broadwell Xeon
NTB: Add flow control to the ntb_netdev
NTB: Add list to MAINTAINERS
Linus Torvalds [Sat, 12 Sep 2015 02:17:28 +0000 (19:17 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
"Second round of updates for the input subsystem.
This introduces two brand new touchscreen drivers (Colibri and
imx6ul_tsc), some small driver fixes, and we are no longer report
errors from evdev_flush() as users do not really have a way of
handling errors, error codes that we were returning were not on the
list of errors supposed to be returned by close(), and errors were
causing issues with one of older versions of systemd"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: imx_keypad - remove obsolete comment
Input: touchscreen - add imx6ul_tsc driver support
Input: Add touchscreen support for Colibri VF50
Input: i8042 - lower log level for "no controller" message
Input: evdev - do not report errors form flush()
Input: elants_i2c - extend the calibration timeout to 12 seconds
Input: sparcspkr - fix module autoload for OF platform drivers
Input: regulator-haptic - fix module autoload for OF platform driver
Input: pwm-beeper - fix module autoload for OF platform driver
Input: ab8500-ponkey - Fix module autoload for OF platform driver
Input: cyttsp - remove unnecessary MODULE_ALIAS()
Input: elan_i2c - add ACPI ID "ELAN1000"
Linus Torvalds [Sat, 12 Sep 2015 02:11:06 +0000 (19:11 -0700)]
Merge tag 'pm+acpi-4.3-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups on top of the previous PM+ACPI
pull request (cpufreq core and drivers, cpuidle, generic power domains
framework). Some of them didn't make to that pull request and some
fix issues introduced by it.
The only really new thing is the support for suspend frequency in the
cpufreq-dt driver, but it is needed to fix an issue with Exynos
platforms.
Specifics:
- build fix for the new Mediatek MT8173 cpufreq driver (Guenter
Roeck).
- generic power domains framework fixes (power on error code path,
subdomain removal) and cleanup of a deprecated API user (Geert
Uytterhoeven, Jon Hunter, Ulf Hansson).
- cpufreq-dt driver fixes including two fixes for bugs related to the
new Operating Performance Points Device Tree bindings introduced
recently (Viresh Kumar).
- suspend frequency support for the cpufreq-dt driver (Bartlomiej
Zolnierkiewicz, Viresh Kumar).
- cpufreq core cleanups (Viresh Kumar).
- intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi).
- additional sanity check in the cpuidle core (Xunlei Pang).
- fix for a comment related to CPU power management (Lina Iyer)"
* tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: fix PCT_TO_HWP macro
intel_pstate: Fix user input of min/max to legal policy region
PM / OPP: Return suspend_opp only if it is enabled
cpufreq-dt: add suspend frequency support
cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency
PM / OPP: add dev_pm_opp_get_suspend_opp() helper
staging: board: Migrate away from __pm_genpd_name_add_device()
cpufreq: Use __func__ to print function's name
cpufreq: staticize cpufreq_cpu_get_raw()
PM / Domains: Ensure subdomain is not in use before removing
cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL
cpuidle/coupled: Add sanity check for safe_state_index
PM / Domains: Try power off masters in error path of __pm_genpd_poweron()
cpufreq: dt: Tolerance applies on both sides of target voltage
cpufreq: dt: Print error on failing to mark OPPs as shared
cpufreq: dt: Check OPP count before marking them shared
kernel/cpu_pm: fix cpu_cluster_pm_exit comment
Linus Torvalds [Sat, 12 Sep 2015 02:00:42 +0000 (19:00 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"Here are the outstanding target-pending updates for v4.3-rc1.
Mostly bug-fixes and minor changes this round. The fallout from the
big v4.2-rc1 RCU conversion have (thus far) been minimal.
The highlights this round include:
- Move sense handling routines into scsi_common code (Sagi)
- Return ABORTED_COMMAND sense key for PI errors (Sagi)
- Add tpg_enabled_sendtargets attribute for disabled iscsi-target
discovery (David)
- Shrink target struct se_cmd by rearranging fields (Roland)
- Drop iSCSI use of mutex around max_cmd_sn increment (Roland)
- Replace iSCSI __kernel_sockaddr_storage with sockaddr_storage (Andy +
Chris)
- Honor fabric max_data_sg_nents I/O transfer limit (Arun + Himanshu +
nab)
- Fix EXTENDED_COPY >= v4.1 regression OOPsen (Alex + nab)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (37 commits)
target: use stringify.h instead of own definition
target/user: Fix UFLAG_UNKNOWN_OP handling
target: Remove no-op conditional
target/user: Remove unused variable
target: Fix max_cmd_sn increment w/o cmdsn mutex regressions
target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess
target/qla2xxx: Honor max_data_sg_nents I/O transfer limit
target/iscsi: Replace __kernel_sockaddr_storage with sockaddr_storage
target/iscsi: Replace conn->login_ip with login_sockaddr
target/iscsi: Keep local_ip as the actual sockaddr
target/iscsi: Fix np_ip bracket issue by removing np_ip
target: Drop iSCSI use of mutex around max_cmd_sn increment
qla2xxx: Update tcm_qla2xxx module description to 24xx+
iscsi-target: Add tpg_enabled_sendtargets for disabled discovery
drivers: target: Drop unlikely before IS_ERR(_OR_NULL)
target: check DPO/FUA usage for COMPARE AND WRITE
target: Shrink struct se_cmd by rearranging fields
target: Remove cmd->se_ordered_id (unused except debug log lines)
target: add support for START_STOP_UNIT SCSI opcode
target: improve unsupported opcode message
...
Linus Torvalds [Sat, 12 Sep 2015 01:15:18 +0000 (18:15 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull second round of SCSI updates from James Bottomley:
"There's one late arriving patch here (added today), fixing a build
issue which the scsi_dh patch set in here uncovered. Other than that,
everything has been incubated in -next and the checkers for a week.
The major pieces of this patch are a set patches facilitating better
integration between scsi and scsi_dh (the device handling layer used
by multi-path; all the dm parts are acked by Mike Snitzer).
This also includes driver updates for mp3sas, scsi_debug and an
assortment of bug fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (50 commits)
scsi_dh: fix randconfig build error
scsi: fix scsi_error_handler vs. scsi_host_dev_release race
fcoe: Convert use of __constant_htons to htons
mpt2sas: setpci reset kernel oops fix
pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY
lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2()
bfa: Fix incorrect de-reference of pointer
bfa: Fix indentation
scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs.
scsi_debug: resp_request: remove unused variable
scsi_debug: fix REPORT LUNS Well Known LU
scsi_debug: schedule_resp fix input variable check
scsi_debug: make dump_sector static
scsi_debug: vfree is null safe so drop the check
scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS;
scsi_debug: define pr_fmt() for consistent logging
mpt2sas: Refcount fw_events and fix unsafe list usage
mpt2sas: Refcount sas_device objects and fix unsafe list usage
scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate()
scsi_dh: don't allow to detach device handlers at runtime
...
Linus Torvalds [Fri, 11 Sep 2015 23:42:39 +0000 (16:42 -0700)]
Merge tag 'media/v4.3-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"A series of patches that move part of the code used to allocate memory
from the media subsystem to the mm subsystem"
[ The mm parts have been acked by VM people, and the series was
apparently in -mm for a while - Linus ]
* tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
[media] media: vb2: Remove unused functions
[media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector
[media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector
[media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector
[media] vb2: Provide helpers for mapping virtual addresses
[media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns()
[media] mm: Provide new get_vaddr_frames() helper
[media] vb2: Push mmap_sem down to memops
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log