netfilter: nf_conntrack: generalize nf_ct_l4proto_net

This patch generalizes nf_ct_l4proto_net by splitting it into chunks and
moving the corresponding protocol part to where it really belongs to.

To clarify, note that we follow two different approaches to support per-net
depending if it's built-in or run-time loadable protocol tracker.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Gao feng <gaofeng@cn.fujitsu.com>

netfilter: nf_ct_icmpv6: add icmpv6_kmemdup_sysctl_table function

Split sysctl function into smaller chucks to cleanup code and prepare
patches to reduce ifdef pollution.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_ct_icmp: add icmp_kmemdup[_compat]_sysctl_table function

Split sysctl function into smaller chucks to cleanup code and prepare
patches to reduce ifdef pollution.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_ct_dccp: add dccp_kmemdup_sysctl_table function

This patch is a cleanup. It adds dccp_kmemdup_sysctl_table to
split code into smaller chunks. Yet it prepares introduction
of nf_conntrack_proto_*_sysctl.c.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_ct_generic: add generic_kmemdup_sysctl_table function

This patch is a cleanup. It adds generic_kmemdup_sysctl_table to
split code into smaller chunks. Yet it prepares introduction
of nf_conntrack_proto_*_sysctl.c.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_ct_sctp: merge sctpv[4,6]_net_init into sctp_net_init

Merge sctpv4_net_init and sctpv6_net_init into sctp_net_init to
remove redundant code now that we have the u_int16_t proto
parameter.

And use nf_proto_net.users to identify if it's the first time
we use the nf_proto_net, in that case, we initialize i

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_ct_udplite: add udplite_kmemdup_sysctl_table function

This cleans up nf_conntrack_l4proto_udplite[4,6] and it prepares
the moving of the sysctl code to nf_conntrack_proto_*_sysctl.c
to reduce the ifdef pollution.

And use nf_proto_net.users to identify if it's the first time
we use the nf_proto_net, in that case, we initialize it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_ct_udp: merge udpv[4,6]_net_init into udp_net_init

Merge udpv4_net_init and udpv6_net_init into udp_net_init to
remove redundant code now that we have the u_int16_t proto
parameter.

And use nf_proto_net.users to identify if it's the first time
we use the nf_proto_net, in that case, we initialize it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_ct_tcp: merge tcpv[4,6]_net_init into tcp_net_init

Merge tcpv4_net_init and tcpv6_net_init into tcp_net_init to
remove redundant code now that we have the u_int16_t proto
parameter.

And use nf_proto_net.users to identify if it's the first time
we use the nf_proto_net, in that case, we initialize it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack: fix memory leak if sysctl registration fails

In nf_ct_l4proto_register_sysctl, if l4proto sysctl registration
fails, we have to make sure that we release the compat sysctl
table.

This can happen if TCP has been registered compat for IPv4, and
IPv6 compat registration fails.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack: use l4proto->users as refcount for per-net data

Currently, nf_proto_net's l4proto->users meaning is quite confusing
since it depends on the compilation tweaks.

To resolve this, we cleanup this code to regard it as the refcount
for l4proto's per-net data, since there may be two l4protos use the
same per-net data.

Thus, we increment pn->users when nf_conntrack_l4proto_register
successfully, and decrement it for nf_conntrack_l4_unregister case.

The users refcnt is not required form layer 3 protocol trackers.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack: add nf_ct_kfree_compat_sysctl_table

This patch is a cleanup.

It adds nf_ct_kfree_compat_sysctl_table to release l4proto's
compat sysctl table and set the compat sysctl table point to NULL.

This new function will be used by follow-up patches.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack: prepare l4proto->init_net cleanup

l4proto->init contain quite redundant code. We can simplify this
by adding a new parameter l3proto.

This patch prepares that code simplification.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack: fix nf_conntrack_l3proto_register

Before commit 2c352f444ccfa966a1aa4fd8e9ee29381c467448
(netfilter: nf_conntrack: prepare namespace support for
l4 protocol trackers), we register sysctl before register
protocol tracker. Thus, if sysctl is registration fails,
the protocol tracker will not be registered.

After that commit, if sysctl registration fails, protocol
registration still remains, so we leave things in intermediate
state.

To fix this, this patch registers sysctl before protocols.
And if protocol registration fail, sysctl is unregistered.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ctnetlink: add new messages to obtain statistics

This patch adds the following messages to ctnetlink:

IPCTNL_MSG_CT_GET_STATS_CPU
IPCTNL_MSG_CT_GET_STATS
IPCTNL_MSG_EXP_GET_STATS_CPU

To display connection tracking system per-cpu and global statistics.

This provides a replacement for the following /proc interfaces:

/proc/net/stat/nf_conntrack
/proc/sys/net/netfilter/nf_conntrack_count

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug

Fixed spelling error in a comment as pointed out by DaveM.
Also refactored existing code a bit to provide placeholders for another ASIC
Bug workaround that will be checked-in soon after this.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sh_eth: add support for set_ringparam/get_ringparam

This patch supports the ethtool's set_ringparam() and get_ringparam().

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sh_eth: fix up the buffer pointers

After freeing the buffer, the driver should change the value of
the pointer to NULL.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sh_eth: remove unnecessary members/definitions

This patch removes unnecessary members in sh_th_private.
This patch also removes unnecessary definitions in sh_eth.h

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sh_eth: remove unnecessary function

The sh_eth_timer() called mod_timer() for itself. So, this patch
removes the function.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Change bnx2x_tests_str_arr to static char

This patch changes the definition of bnx2x_tests_str_arr from char to static
char. This correction will also eliminate the sparse warning created in commit
cf2c1df62e065bfc15e38daf2d3479a56b320f29.

Signed-off-by: Merav Sicron <meravs@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities advertisement

1. When FCoE offload driver is registered, copy its capabilities to the chip
   scratchpad.
2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad.
3. Add FCoE/iSCSI statistics collection support

Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

6lowpan: double unlock on an error path

We already unlocked a few lines earlier here, so we can go directly to
drop without passing through unlock.  This was introduced recently in
c5d3687f6c ('6lowpan: read data from skb safely').

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: Delete NLMSG_PUT and NLMSG_NEW.

No longer used and a poor interface as they were macros
with embedded gotos.

Signed-off-by: David S. Miller <davem@davemloft.net>

pkt_sched: sch_api: Move away from NLMSG_NEW().

And use nlmsg_data() while we're here too, as well as remove
a useless cast.

Signed-off-by: David S. Miller <davem@davemloft.net>

pkt_sched: cls_api: Move away from NLMSG_NEW().

And use nlmsg_data() while we're here too, as well as remove
a useless cast.

Signed-off-by: David S. Miller <davem@davemloft.net>

decnet: dn_table: Move away from NLMSG_NEW().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

decnet: dn_route: Move away from NLMSG_NEW().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

audit: netlink: Move away from NLMSG_NEW().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

infiniband: netlink: Move away from NLMSG_NEW().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

selinux: netlink: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

unix_diag: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too and remove useless
casts.

Signed-off-by: David S. Miller <davem@davemloft.net>

pkt_sched: act_api: Move away from NLMSG_PUT().

Move away from NLMSG_NEW() as well.

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nfnetlink_queue_core: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nfnetlink_log: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ipt_ULOG: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

inet_diag: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too, and remove useless
casts.

Signed-off-by: David S. Miller <davem@davemloft.net>

decnet: dn_rtmsg: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Also, remove pointless kernel log message.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ebt_ulog: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Also, free and NULL out skb when nlmsg_put() fails and remove
pointless kernel log message.

Signed-off-by: David S. Miller <davem@davemloft.net>

gdm72xx: Move away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

connector: Move cn_test.c away from NLMSG_PUT().

And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>

connector: use nlmsg_put() instead of NLMSG_PUT() macro.

The NLMSG_PUT() macro contains a hidden goto which makes the code hard
to audit and very error prone.

While been there also use the inline function nlmsg_data() instead of the
NLMSG_DATA() macro to do explicit type checking.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

team: remove unused rcu_head field from team_port struct

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

team: do not allow to map disabled ports

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

team: fix team_adjust_ops with regard to enabled ports

team_adjust_ops should check for enabled ports, not all ports.
This may lead to division by zero. This patch fixes this.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: add monitor listener to TX datapath

Add monitor receive callback to the TX datapath to catch all the
data sent to transceivers.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ieee802154: add support for the at86rf230/231 transceivers

The AT86RF231 is a feature rich, low-power 2.4 GHz radio transceiver
designed for industrial and consumer ZigBee/IEEE 802.15.4, 6LoWPAN,
RF4CE and high data rate 2.4 GHz ISM band applications.

This patch adds support for the Atmel RF230/231 radio transceivers.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: mlme start request

Basic preparations to start the interface.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: page and channel setter

A new method to set page and channel values for a transceiver
was added to the MIB.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: short address setter

A method to assign the IEEE802.15.4 short address was added to the
MIB implementation.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: set and get PAN id

Two methods intended to get and set the Private Area Network identifier
were added to the MIB implementation.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: add wpan device-class support

Every real 802.15.4 transceiver, which works with software MAC layer,
can be classified as a wpan device in this stack. So the wpan device
implementation provides missing link in datapath between the device
drivers and the Linux network queue.

According to the IEEE 802.15.4 standard each packet can be one of the
following types:
 - beacon
 - MAC layer command
 - ACK
 - data

This patch adds support for the data packet-type only, but this is
enough to perform data transmission and receiving over radio.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qmi_wwan: simplify a check in qmi_wwan_bind()

This code is easier to read if we specify which flags we want at the
condition instead of at the top of the function.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Cache ip_error() routes even when not forwarding.

And account for the fact that, when we are not forwarding, we should
bump statistic counters rather than emit an ICMP response.

RP-filter rejected lookups are still not cached.

Since -EHOSTUNREACH and -ENETUNREACH can now no longer be seen in
ip_rcv_finish(), remove those checks.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Remove unnecessary code from rt_check_expire().

IPv4 routing cache entries no longer use dst->expires, because the
metrics, PMTU, and redirect information are stored in the inetpeer
cache.

Signed-off-by: David S. Miller <davem@davemloft.net>

batman-adv: fix global TT entry deletion

During the last merge involving translation-table.c something went wrong and two
lines disappeared from translation-table.c. This patch recovers them.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

batman-adv: fix condition in AP isolation

During the last conflict resolution involving translation-table.c something went
wrong and a condition in the AP isolation code was reversed. This patch fixes
this problem.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sh-eth: Check return value of sh_eth_reset when chip reset fail

The sh_eth_reset function resets chip, but this performs nothing when failed.
This changes sh_eth_reset return an error, when this failed in reset.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sh-eth: Add support selecting MII function for SH7734 and R8A7740

Ethernet IP of SH7734 and R8A7740 has selecting MII register.
The user needs to change a value according to MII to be used.
This adds the function to change the value of this register.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6/route.c: packets originating on device match lo

Fix to allow IPv6 packets originating locally to match rules with the "iff"
set to "lo".  This allows IPv6 rule matching work the same as it does for
IPv4.  From the iproute2 man page:

   iif NAME
  select  the incoming device to match.  If the interface is loop‐
  back, the rule only matches packets originating from this  host.
  This  means that you may create separate routing tables for for‐
  warded and local packets and, hence, completely segregate them.

Signed-off-by: David McCullough <david_mccullough@mcafee.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: Remove use of module parameters

Remove use of module parameters on caif hsi device, as
rtnl configuration parameters are already supported.

All caif hsi configuration data is put in cfhsi_config,
and default values in hsi_default_config.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: Replace platform device with ops structure.

Remove use of struct platform_device, and replace it with
struct cfhsi_ops. Updated variable names in the same
spirit:
cfhsi_get_dev to cfhsi_get_ops,
cfhsi->dev to cfhsi->ops and,
cfhsi->dev.drv to cfhsi->ops->cb_ops.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: Add rtnl support

Add RTNL support for managing the caif hsi interface.
The HSI HW interface is no longer registering as a device,
instead we use symbol_get to get hold of the HSI API.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/caif: Update documentation

Update drawing and remove description of old features.
Add HSI and USB link layers to the drawing.

Reported-by: Joerg Reisenweber <joerg.reisenweber@stericssion.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: Remove uncecessary assignments

Remove assignment at declaration when not needed.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: Use netdev_X instead of dev_X for printing

Replace dev_X with the corresponding netdev_X print
function when applicable.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: changed test on aggregation_timeout

Aggregation_timeout is an unsigned long,
a test for less than zero can never become true,
compare with zero instead.

Signed-off-by: Kim Lilliestierna <kim.xx.lilliestierna@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: Removed dead code

Simplify logic and remove dead code.

Signed-off-by: Kim Lilliestierna <kim.xx.lilliestierna@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Fixed potential memory leak

Rearranged the allocation and packet creations to
avoid potential leaks in error path.

Signed-off-by: Kim Lilliestierna <kim.xx.lilliestierna@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: added check for potential null return

Add check on NULL return from caif_get().

Signed-off-by: Kim Lilliestierna <Kim.xx.Lilliestierna@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Remove unused pointer and code

Removed surplus call to caif_device_list() in caif_dev.c

Signed-off-by: Kim Lilliestierna <kim.xx.lilliestierna@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

6lowpan: remove excessive argument in pr_debug

Remove excessive __func__ argument in pr_debug function and some
excessive debug messages.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

6lowpan: fix hop limit compression

Add missing pointer shift for the 'default' case.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Cc: Tony Cheneau <tony.cheneau+zigbeedev@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

6lowpan: read data from skb safely

Check if skb buffer can pull requested amount of bytes and return
an error in opposite case.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Included changes:
- yet another batch of 'namespace cleaning' patches

Conflicts:
net/batman-adv/translation-table.c

Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Regression bug wherein VFs creation broken for multiple cards.

Fix be_find_vfs() to check for matching bus number as well along with devfn

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Explicitly clear the reserved field in the Tx Descriptor

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: struct sock cleanups

Add missing kernel doc for sk_rx_dst

Move sk_rx_dst to avoid two 32bit holes on 64bit arches

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Remove 'unlikely' qualifier in skb_steal_sock()

With early demux enabled by default for TCP flows, there is high chance that
skb->sk will be non-null. 'unlikely()' was removed from __inet_lookup_skb() but
maybe it can be removed from skb_steal_sock() as well.

Note: skb_steal_sock() is also called by __inet6_lookup_skb() and
__udp4_lib_lookup_skb() but they are protected by their own 'unlikely' calls.

Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Conflicts:
drivers/net/usb/qmi_wwan.c
net/batman-adv/translation-table.c
net/ipv6/route.c

qmi_wwan.c resolution provided by Bjørn Mork.

batman-adv conflict is dealing merely with the changes
of global function names to have a proper subsystem
prefix.

ipv6's route.c conflict is merely two side-by-side additions
of network namespace methods.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: fib: fix fib dump restart

Commit 2bec5a369ee79576a3 (ipv6: fib: fix crash when changing large fib
while dumping it) introduced ability to restart the dump at tree root,
but failed to skip correctly a count of already dumped entries. Code
didn't match Patrick intent.

We must skip exactly the number of already dumped entries.

Note that like other /proc/net files or netlink producers, we could
still dump some duplicates entries.

Reported-by: Debabrata Banerjee <dbavatar@gmail.com>
Reported-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netxen: Error return off by one for XG port.

There are  NETXEN_NIU_MAX_XG_PORTS ports.
Port indexing starts from zero.
Hence we should also return error for  'port == NETXEN_NIU_MAX_XG_PORTS'.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>

netxen: Error return off by one in 'netxen_nic_set_pauseparam()'.

There are 'NETXEN_NIU_MAX_GBE_PORTS'  GBE ports. Port indexing starts
from zero.
Hence we should also return error for "port == NETXEN_NIU_MAX_GBE_PORTS"

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>

batman-adv: Prefix translation-table local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix soft-interface local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix send local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix routing local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix originator local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix icmp_socket local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix hash local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix hard-interface local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix gateway_common local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix gateway_client local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix bridge_loop_avoidance local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix bat_sysfs local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix bat_iv_ogm local static functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix main static inline functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix unicast static inline functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix originator static inline functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Prefix hash static inline functions with batadv_

All non-static symbols of batman-adv were prefixed with batadv_ to avoid
collisions with other symbols of the kernel. Other symbols of batman-adv
should use the same prefix to keep the naming scheme consistent.

Signed-off-by: Sven Eckelmann <sven@narfation.org>