drm/i915: print computed bpp in dp link configuration

Pretty useful to debug our DP bandwidth woes.

v2: Also print out the required and available link bandwidth,
suggested by Chris Wilson.

v3: Also print out the input parameters so that diagnosing failures to
find a valid dp link configuration is possible.

v4: s/Display port/DP/ to shorten the output.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel Vetter writes:

A new drm-intel-next pull. Highlights:
- More gmbus patches from Daniel Kurtz, I think gmbus is now ready, all
 known issues fixed.
- Fencing cleanup and pipelined fencing removal from Chris.
- rc6 residency interface from Ben, useful for powertop.
- Cleanups and code reorg around the ringbuffer code (Ben&me).
- Use hw semaphores in the pageflip code from Ben.
- More vlv stuff from Jesse, unfortunately his vlv cpu is doa, so less
 merged than I've hoped for - we still have the unused function warning :(
- More hsw patches from Eugeni, again, not yet enabled fully.
- intel_pm.c refactoring from Eugeni.
- Ironlake sprite support from Chris.
- And various smaller improvements/fixes all over the place.

Note that this pull request also contains a backmerge of -rc3 to sort out
a few things in -next. I've also had to frob the shortlog a bit to exclude
anything that -rc3 brings in with this pull.

Regression wise we have a few strange bugs going on, but for all of them
closer inspection revealed that they've been pre-existing, just now
slightly more likely to be hit. And for most of them we have a patch
already. Otherwise QA has not reported any regressions, and I'm also not
aware of anything bad happening in 3.4.

* tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel: (420 commits)
  drm/i915: rc6 residency (fix the fix)
  drm/i915/tv: fix open-coded ARRAY_SIZE.
  drm/i915: invalidate render cache on gen2
  drm/i915: Silence the change of LVDS sync polarity
  drm/i915: add generic power management initialization
  drm/i915: move clock gating functionality into intel_pm module
  drm/i915: move emon functionality into intel_pm module
  drm/i915: move drps, rps and rc6-related functions to intel_pm
  drm/i915: fix line breaks in intel_pm
  drm/i915: move watermarks settings into intel_pm module
  drm/i915: move fbc-related functionality into intel_pm module
  drm/i915: Refactor get_fence() to use the common fence writing routine
  drm/i915: Refactor fence clearing to use the common fence writing routine
  drm/i915: Refactor put_fence() to use the common fence writing routine
  drm/i915: Prepare to consolidate fence writing
  drm/i915: Remove the unsightly "optimisation" from flush_fence()
  drm/i915: Simplify fence finding
  drm/i915: Discard the unused obj->last_fenced_ring
  drm/i915: Remove unused ring->setup_seqno
  drm/i915: Remove fence pipelining
  ...

drm/radeon/kms/hdmi: use relative offsets, official regs

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: keep HDMI state in separated variable

If we want hdmi_offset to be relative to the first block, zero value can
be used also for enabled block.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: get rid of r600_hdmi_find_free_block

R6xx has routable blocks, but there's nothing wrong in assignment based
on dig_encoder. We didn't really need that algorithm.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: get rid of hdmi_config_offset

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: move audio params to separated struct

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: fix collision between two patches breaking build

this fixes a report that the new load code needed to be updated for
ajax's validity changes.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: fixed: Add dfixed_frac

This helper macro retrieves the fractional part of a fixed20_12 20.12
fixed-point number.

Signed-off-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: Set the mapping mask

Some boards such as the Intel D2700MUD allow you to have over 4GB of RAM.
The GTT on the PVR based devices is 32bit however. Hugh Dickins points out
that we should therefore be setting the mapping gfp mask.

This is not the whole fix for the problem. Some further shmem patches will
be needed to deal with the corner cases.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: Add the base elements of CDV hotplug support

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: Add ops for hotplug support.

This provides the needed callback hooks to add hotplug display support to
the GMA36x0 devices.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

cdv: continue synching up with updated reference code

In particular clean up the errata handling and correct the crtc masks. We do
this a bit differently using our device abstraction for neatness.

This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related
changes that will need. It touches on backlight init but the full backlight
support is not in this change set.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: Clean up weirdness in the cdv mode test code

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: support 1080p

The problem in console mode is lack of linear memory. We can solve that by
dropping to 16bpp. The mode setting X server will allocate its own GEM
framebuffer in 32bpp and all will be well.

We could just do 16bpp anyway but that would be a regression on the lower
modes as many distributions don't yet ship the generic mode setting KMS
drivers.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: panel presence check

Introduce a panel presence check for Cedartrail. Non netbook devices don't
necessarily have a panel attached.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: intel_bios updates

Pull in various i915 bits that we will need to begin tackling the LVDS detect
and ACPI events. We try and drift towards the i915 version of the code with
the long term goal that at least some of it can one day be unified.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: mark framebuffer pages write combining

We don't want them uncached, combining will do nicely and fixes the performance
problem with the generic modesetting X server.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: Update the Cedarview clock handling

Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: read the PLL bits

We need to pull more stuff from the VBT in order to configure the clocking
correctly in all cases. Add the relevant bits from the other CDV driver work.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gma500: Fix leak of uncached page

This was reported a long time ago (and I apologize to whoever it was that
reported it as I've lost the original report).

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Store vendor IDs directly in the EDID quirk structure

EDID vendor IDs are always 3 characters long (4 with the terminating
0).  It doesn't make any sense to have a (possibly 8-byte) pointer
to the ID string in the quirk structure.

Signed-off-by: Ian Pilcher <arequipeno@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Try harder to fix up base EDID blocks

Requiring the first byte of the EDID base block header to be 0 means we
don't fix up as many transfer errors as we could.  Instead have the
callers specify whether it's meant to be block 0 or not, and
conditionally run header fixup based on that.

Bugzilla: https://bugzilla.redhat.com/812890
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

vga: fix build when fbdev is a module

This fixes the build breakage reported by Stephen in -next
when merging the drm-next tree.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Unify and fix idr error handling

The error handling code w.r.t. idr usage looks inconsistent.

In the case of drm_mode_object_get() and drm_ctxbitmap_next() the error
handling is also incomplete.

Unify the code to follow the same pattern always.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

vga-switcheroo: select VGA arbitration.

Since Matthew's changes we have to select arbitration.

Reported-by: devh on #radeon
Signed-off-by: Dave Airlie <airlied@redhat.com>

efifb: Implement vga_default_device() (v2)

EFI doesn't typically make use of the legacy VGA ROM, but it may still be
configured to pass that through to a given video device. This may lead to
an inaccurate choice of default video device. Add support to efifb to pick
out the correct active video device.

v2: fix if->ifdef

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: hpa@zytor.com
Cc: matt.fleming@intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

x86: Use vga_default_device() when determining whether an fb is primary

IORESOURCE_ROM_SHADOW is not necessarily an indication that the hardware
is the primary device. Add support for using the vgaarb functions and
fall back if nothing's set them.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: mingo@redhat.com
Acked-by: hpa@zytor.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

vga-switcheroo: Use vga_default_device()

vga-switcheroo currently changes the default VGA device by fiddling with
the IORESOURCE_ROM_SHADOW flag on the device. This isn't strictly accurate,
since there's no guarantee that switching also changes the ROM decoding.
Switch over to using the vgaarb functions for this.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

vgaarb: Add support for setting the default video device (v2)

The default VGA device is a somewhat fluid concept on platforms with
multiple GPUs. Add support for setting it so switching code can update
things appropriately, and make sure that the sysfs code returns the right
device if it's changed.

v2: Updated to fix builds when __ARCH_HAS_VGA_DEFAULT_DEVICE is false.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: benh@kernel.crashing.org
Cc: airlied@redhat.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix up audio interrupt handling

- add support for rs6xx
- add support for DCE4/5
- fixup 6xx/7xx

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add register definitions for audio

This adds register definitions for HDMI/DP audio on
DCE2/3/4/5 hardware.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: improve bpc handling (v2)

Improve handling of bpc (bits per color) in radeon.
In most cases we want 8 except for HDMI, DP, LVDS, and eDP.

v2: handle DP better.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mm: fixup compilation error due to an asm write through a const pointer

This regression has been introduced in

commit f56f821feb7b36223f309e0ec05986bb137ce418
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Mar 25 19:47:41 2012 +0200

    mm: extend prefault helpers to fault in more than PAGE_SIZE

I have failed to notice this because x86 asm seems to happily compile
things as-is.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Add packed attribute to new gtf2 and cvt structs

The new structs added in struct detailed_data_monitor_range must be
marked with packed attribute although the outer struct itself is
already marked as packed.  Otherwise these 7-bytes structs may be
aligned, and give the wrong position and size for the data.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Add a workaround for 1366x768 HD panel

HD panel (1366x768) found most commonly on laptops can't be represented
exactly in CVT/DMT expression, which leads to 1368x768 instead, because
1366 can't be divided by 8.

Add a hack to convert to 1366x768 manually as an exception.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915: rc6 residency (fix the fix)

Chris' fix for my 32b breakage was incorrect. do_div returns a
remainder. Go back to a divide macro which is more 32b friendly.

Tested on x86-64.

This has only been compile tested on 32b systems.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48756
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Sincere-apologies: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
[danvet: fixup 32bit compile-fail.]
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/tv: fix open-coded ARRAY_SIZE.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: replace open-coded ARRAY_SIZE with macro

[airlied: fixed one more new one added since]

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: add missing NULL checks.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Generate modes from extra_modes for range descriptors

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Add extra_modes

Some common sizes that don't show up in DMT.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Give the est3 mode struct a real name

We want the same type for extra modes inferred from ranges.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Update range descriptor struct for EDID 1.4

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Do drm_dmt_modes_for_range() for all range descriptor types

EDID 1.4 retcons the meaning of the "GTF feature" bit to mean "is
continuous frequency", and moves the set of supported timing formulas
into the range descriptor itself.  In any event, the range descriptor
can act as a filter on the DMT list without regard to a specific timing
formula.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Fix some comment typos in the DMT mode list

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Add the reduced blanking DMT modes to the DMT list

Copied from the list in xserver.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: s/drm_gtf_modes_for_range/drm_dmt_modes_for_range/

Slightly more honest naming.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Remove a misleading comment

mode_in_range() handles what this was warning about.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Allow drm_mode_find_dmt to hunt for reduced-blanking modes

It won't find any, yet.  Fix up callers to match: standard mode codes
will look prefer r-b modes for a given size if present, EST3 mode codes
will look for exactly the r-b-ness mentioned in the mode code.  This
might mean fewer modes matched for EST3 mode codes between now and when
the DMT mode list regrows the r-b modes, but practically speaking EST3
codes don't exist in the wild.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Rewrite drm_mode_find_dmt search loop

No functional change, but will make an upcoming change clearer.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Document drm_mode_find_dmt

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: add DRM_MODE_FLAG_DBLCLK to CEA modes requiring it

CEA modes 6, 7, 8, 9, 21, 22, 23, 24, 44, 45, 50, 51, 54, 55, 58 and 59
require sending pixel data 2 times. This doesn't mean the modes will
work yet, but now the drivers know they're different.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: add the VIC number to the CEA EDID modes

The specification defines a VIC (Video Identification Code) for each
mode. When we're browsing drm_edid_modes.h, it really helps to have the
number available (otherwise we have to count...). These numbers are also
used in the EDID data (by the CEA-EXT extension block).

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Parse color format information in CEA blocks

The CEA extension block has a field which describes which YCbCr modes are
supported by the device, use it to fill the drm_display_info color_formats
fields. Also the existence of a CEA extension block is used as indication
that the device supports RGB.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Fix EDID color format parsing

The code should obviously check the EDID feature field for EDID feature flags
and not the color_formats field of the drm_display_info struct. Also update the
color_formats field with new modes instead of overwriting the current mode.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Add sanity checks to framebuffer creation

Perform some basic sanity check on some of the parameters in
drm_mode_fb_cmd2.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Add drm_format_{horz, vert}_chroma_subsampling() utility functions

These functions return the chroma subsampling factors for the specified
pixel format.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Add drm_format_plane_cpp() utility function

This function returns the bytes per pixel value based on the pixel
format and plane index.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Move drm_format_num_planes() to drm_crtc.c

There will be a need for this function in drm_crtc.c later. This
avoids making drm_crtc.c depend on drm_crtc_helper.c.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915: invalidate render cache on gen2

It looks like we also need to flush the render cache when we just
invalidate it. This fixes a regression in i-g-t/gem_tiled_blits on my
i855gm. I guess the render cache there is virtually indexed, so we
need to clean it when changing gtt mappings.

This regression has been introduce in

commit 46f0f8d120c4afae53a5670bf3ac80a928340ff3
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Apr 18 11:12:11 2012 +0100

    drm/i915: Don't set a MBZ bit in gen2/3 MI_FLUSH

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Silence the change of LVDS sync polarity

When the change to start adjusting the sync polarity of the LVDS mode
was introduced in

commit aa9b500ddf1a6318e7cf8b1754696edddae86db9
Author: Bryan Freed <bfreed@google.com>
Date:   Wed Jan 12 13:43:19 2011 -0800

    drm/i915: Honour LVDS sync polarity from EDID

we made the change in state verbose so that we could quickly spot any
regressions that made have also been introduced with it. As there do not
appear to have been any, remove the extra logging.

v2: Remove the no longer used variables.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: add generic power management initialization

This adds intel_pm routine for generic power-related infrastructure
initialization.

v2: now that all the platform-specific stuff is initialized in one place, we
can also add back the static definitions to platform-specific functions which
we abstract now.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: move clock gating functionality into intel_pm module

This moves the clock gating-related functions into intel_pm module.

Also, please note that we do change the function type from static to
non-static in this patch for the move, to prevent breaking bisecting with
non-working intermediate commit. Those are returned back to static form in
the following patch which setups a generic PM initialization function,
which was split into a different one to simplify review.

v2: rebase on top of latest drm-intel-next-queued to incorporate all the
changes that went there meanwhile.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: move emon functionality into intel_pm module

This moves the Ironlake energy monitoring functionality into intel_pm
module.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: move drps, rps and rc6-related functions to intel_pm

This moves DRPS, RPS and RC6-related functionality into intel_pm module.

It also removes the linux/cpufreq.h include from intel_display, as its
only user was the GPU turbo-related functionality in Gen6+ code path.

v2: rebase on top of latest drm-intel-next-queued adding the bits that
shifted around since the last patch.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: fix line breaks in intel_pm

The previous patch had way too long lines, this fixes them to fit into a
reasonable screen space.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: move watermarks settings into intel_pm module

Move watermarks and helper functions (such as cxsr and fifo buffers) into
intel_pm module.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: move fbc-related functionality into intel_pm module

This commit moves Frame Buffer Compression-related operations and support
functions into the new intel_pm module.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Refactor get_fence() to use the common fence writing routine

We can also take advantage of the new 'no retire' mode for seqno waiting
to avoid having to take a reference on the old fence object whilst
flushing an existing fence.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Refactor fence clearing to use the common fence writing routine

Now that we have a routine that is able to clear the fences as well as
setup up the register for a tiled object, remove the surplus routines to
clear the fences.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Refactor put_fence() to use the common fence writing routine

One clarification that we make is to the existing semantics of
obj->tiling_changed to only mean that we need to update an associated
fence register (including the NO_FENCE when executing an untiled but
fenced GPU command). If we do not have a fence register or pending
fenced GPU access for the object (after put_fence() for example), then
we can clear the tiling_changed flag as any fence will necessarily be
rewritten upon acquisition.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Prepare to consolidate fence writing

Update the existing architecture specific fence writing routines to
either update the fence to point to a tiled object or to clear them in
preparation to remove the other fence writing routes.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove the unsightly "optimisation" from flush_fence()

As i915_wait_request() will first check for an already passed seqno,
doing it also in the caller is a waste of space for a cold path.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Simplify fence finding

As the fences are stored in LRU order, we can simply reuse the oldest if
we do not have an unused register.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Discard the unused obj->last_fenced_ring

As we now never pipeline a fence update, obj->last_fenced_ring is always
the same as the obj->ring whenever obj->last_fenced_seqno is active, so
remove it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove unused ring->setup_seqno

As we now no longer track a pipelined fence change, we never use
ring->setup_seqno and can kill it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove fence pipelining

Step 2 is then to replace the pipelined parameter with NULL and perform
constant folding to remove dead code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove the pipelined parameter from get_fence()

We never succeeded in getting pipelined fencing to work (unresolved
spurious GPU hangs), so begin the process of dismantling and removal
the broken code.

Step 1 is the removal of the pipeline parameter to get_fence().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Wait for all pending operations to the fb before disabling the pipe

During modeset we have to disable the pipe to reconfigure its timings
and maybe its size. Userspace may have queued up command buffers that
depend upon the pipe running in a certain configuration and so the
commands may become confused across the modeset. At the moment, we use a
less than satisfactory kick-scanline-waits should the GPU hang during
the modeset. It should be more reliable to wait for the pending
operations to complete first, even though we still have a window for
userspace to submit a broken command buffer during the modeset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Don't set a MBZ bit in gen2/3 MI_FLUSH

On gen2 MI_EXE_FLUSH is actually an AGP flush bit and on gen3 marked as
reserved.  On both it is documented as being must-be-zero. So obey the
documentation, and separate the gen2 flush into its own little routine
and share with gen3.

This means that we can rename the existing render_ring_flush() to
reflect the generation from which it first applies and remove the code
for handling earlier generations from it.

v2: Applies to gen3 as well
v3: Make it compile and improve the commit message.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: intel_update_fbc() requires struct_mutex, so no longer atomic

As we need to manipulate our device structure and allocate queue a task,
it is no longer a simple atomic operation and cannot be performed along
the atomic modeset paths. Instead make sure that we disable FBC (which
must be therefore kept as a set of simple register writes) when
performing the atomic modeset and leave the heavy-weight
intel_update_fbc() for the normal modeset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Unpin the flip target if we fail to queue the flip

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: [GEN7] Use HW scheduler for fixed function shaders

This originally started as a patch from Bernard as a way of simply
setting the VS scheduler. After submitting the RFC patch, we decided to
also modify the DS scheduler. To be most explicit, I've made the patch
explicitly set all scheduler modes, and included the defines for other
modes (in case someone feels frisky later).

The rest of the story gets a bit weird. The first version of the patch
showed an almost unbelievable performance improvement. Since rebasing my
branch it appears the performance improvement has gone, unfortunately.
But setting these bits seem to be the right thing to do given that the
docs describe corruption that can occur with the default settings.

In summary, I am seeing no more perf improvements (or regressions) in my
limited testing, but we believe this should be set to prevent rendering
corruption, therefore cc stable.

v1: Clear bit 4 also (Ken + Eugeni)
Do a full clear + set of the bits we want (Me).

Cc: Bernard Kilarski <bernard.r.kilarski@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by (RFC): Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Replace open coded MI_BATCH_GTT

The (2<<6) virtual memory space selector harks back to gen3 and is
mandatory given our use of GTT space for batchbuffers. On gen4+, use of
the GTT became mandatory and bit6 marked reserved. However the code must
now explicitly set (1<<7), which conveniently is also (2<<6).

To clarify the meaning for future readers, replace the open coded (2<<6)
with MI_BATCH_GTT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Always flush tiling changes before accessing through the GTT

As we defer updating the fence register from set-tiling to the point of
use, we need to declare every access through the GTT as either fenced or
unfenced.

This patches fixes an old bug in the execbuffer relocation processing
which could conceivably be hit by a pathological userspace.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: [sparse] don't use variable size arrays

Sparse doesn't like:
"error: bad constant expression"

Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
[danvet: apply s/drm_malloc_ab/kcalloc bikeshed. If it's small enough
for the stack, it's small enough for kmalloc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: [sparse] trivial sparse fixes

This should contain all the changes which require no thought to make
sparse happy.

Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: IBX+ doesn't have separate vsync/hsync controls on the VGA DAC

When the PCH split occurred, hw dropped support for separate hsync and
vsync disable in the VGA DAC.  So add a PCH specific DPMS function that
just uses the port enable bit for controlling DPMS states.

Before this fix, when anything other than a full DPMS off occurred,
the VGA port would be left enabled and scanning out while all the other
heads would turn off as expected.

v2: duplicate encoder helper vtable into pch and gmch versions (Daniel)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48491
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: s/intel_crt_dpms/gmch_crt_dpms as suggested by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Mask reserved bits in display/sprite address registers

The purpose of this patch is to avoid zeroing the lower 12 reserved bits
of surface base address registers (framebuffer & sprite).  There are bits
in that range that may occasionally be set by BIOS or by other components.

Signed-off-by: Armin Reese <armin.c.reese@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: disable rc6 on haswell for now

This needs proper enablement to avoid machine hangs, so let's just avoid
it for now.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: share IVB cursor routine with Haswell

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: haswell has 3 pipes as well

They work differently, but the count is the same.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: share forcewaking code between IVB and HSW

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: add WRPLL divider programming bits

Those are used to program the WRPLL dividers correctly for each gives
frequency.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: add definition of LPT FDI port width registers

v2: change bits names to align better with other bits style

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: set stc evict disable lra evict w/a

Our workaround list kindly lists that this new default value needs to
be updated in Bspec. Naturally, this did not happen.

Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: implement w/a for incorrect guarband clipping

According to Bsepc, this should be set by default, but isn't. See vo1c.4
"Render Engine Command Streamer", Section 1.1.14.3 "3D_CHICKEN3"

Bspec also says that we always need to set all mask bits.

v2: Add comment about the mask bits wtf.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: properly set ppgtt cacheability on snb

For some reason snb has 2 fields to set ppgtt cacheability. This one
here does not exist on gen7.

This might explain why ppgtt wasn't a win on snb like on ivb - not
enough pte caching.

v2: Fixup rebase fail.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: set w/a bit for snb pagefaults

Bspec says that we need to set this: vol1c.3 "Blitter Command
Streamer", Section 1.1.2.1 "GAB_CTL_REG - GAB Unit Control Register".

We don't really rely on pagefaults, but who knows what this all
affects.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>