mach64: fix display corruption on big endian machines

commit 3c6c6a7878d00a3ac997a779c5b9861ff25dfcc8 upstream.

The code for manual bit triple is not endian-clean. It builds the variable
"hostdword" using byte accesses, therefore we must read the variable with
"le32_to_cpu".

The patch also enables (hardware or software) bit triple only if the image
is monochrome (image->depth). If we want to blit full-color image, we
shouldn't use the triple code.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: enable broadcom menu for arm64 bcm2835

commit fec3624f0bcdb6b20ef9ccf9d9d55d0d75d776f8 upstream.

Moving the bcm2835 thermal driver to the broadcom directory prevented it
from getting enabled for arm64 builds, since the broadcom directory is only
available when 32-bit specific ARCH_BCM is set.

Fix this by enabling the Broadcom menu for ARCH_BCM or ARCH_BCM2835.

Fixes: 6892cf07e733 ("thermal: bcm2835: move to the broadcom subdirectory")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Allen Wild <allenwild93@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ceph: fix dentry leak in splice_dentry()"

commit efe328230dc01aa0b1269aad0b5fae73eea4677a upstream.

This reverts commit 8b8f53af1ed9df88a4c0fbfdf3db58f62060edf3.

splice_dentry() is used by three places. For two places, req->r_dentry
is passed to splice_dentry(). In the case of error, req->r_dentry does
not get updated. So splice_dentry() should not drop reference.

Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: bump CEPH_MSG_MAX_DATA_LEN

commit 94e6992bb560be8bffb47f287194adf070b57695 upstream.

If the read is large enough, we end up spinning in the messenger:

  libceph: osd0 192.168.122.1:6801 io error
  libceph: osd0 192.168.122.1:6801 io error
  libceph: osd0 192.168.122.1:6801 io error

This is a receive side limit, so only reads were affected.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov7670: make "xclk" clock optional

commit 786fa584eda86d6598db3b87c61dc81f68808d11 upstream.

When the "xclk" clock was added, it was made mandatory. This broke the
driver on an OLPC plaform which doesn't know such clock. Make it
optional.

Tested on a OLPC XO-1 laptop.

Fixes: 0a024d634cee ("[media] ov7670: get xclk")

Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: mvebu: use correct bit for 98DX3236 NAND

commit 00c5a926af12a9f0236928dab3dc9faf621406a1 upstream.

The correct fieldbit value for the NAND PLL reload trigger is 27.

Fixes: commit e120c17a70e5 ("clk: mvebu: support for 98DX3236 SoC")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: Fix static checker warning in rockchip_ddrclk_get_parent call

commit 665636b2940d0897c4130253467f5e8c42eea392 upstream.

Fixes the signedness bug returning '(-22)' on the return type by removing the
sanity checker in rockchip_ddrclk_get_parent(). The function should return
and unsigned value only and it's safe to remove the sanity checker as the
core functions that call get_parent like clk_core_get_parent_by_index already
ensures the validity of the clk index returned (index >= core->num_parents).

Fixes: a4f182bf81f18 ("clk: rockchip: add new clock-type for the ddrclk")
Cc: stable@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: at91: Fix division by zero in PLL recalc_rate()

commit 0f5cb0e6225cae2f029944cb8c74617aab6ddd49 upstream.

Commit a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached MUL
and DIV values") removed a check that prevents a division by zero. This
now causes a stacktrace when booting the kernel on a at91 platform if
the PLL DIV register contains zero. This commit reintroduces this check.

Fixes: a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ronald Wahl <rwahl@gmx.de>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: s2mps11: Fix matching when built as module and DT node contains compatible

commit 8985167ecf57f97061599a155bb9652c84ea4913 upstream.

When driver is built as module and DT node contains clocks compatible
(e.g. "samsung,s2mps11-clk"), the module will not be autoloaded because
module aliases won't match.

The modalias from uevent: of:NclocksT<NULL>Csamsung,s2mps11-clk
The modalias from driver: platform:s2mps11-clk

The devices are instantiated by parent's MFD.  However both Device Tree
bindings and parent define the compatible for clocks devices.  In case
of module matching this DT compatible will be used.

The issue will not happen if this is a built-in (no need for module
matching) or when clocks DT node does not contain compatible (not
correct from bindings perspective but working for driver).

Note when backporting to stable kernels: adjust the list of device ID
entries.

Cc: <stable@vger.kernel.org>
Fixes: 53c31b3437a6 ("mfd: sec-core: Add of_compatible strings for clock MFD cells")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Drop own definition of PTRACE_SYSEMU/_SINGLESTEP

commit 0676b957c24bfb6e495449ba7b7e72c5b5d79233 upstream.

32bit UML used to define PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP
own its own because many years ago not all libcs had these request codes
in their UAPI.
These days PTRACE_SYSEMU/_SINGLESTEP is well known and part of glibc
and our own define becomes problematic.

With change c48831d0eebf ("linux/x86: sync sys/ptrace.h with Linux 4.14
[BZ #22433]") glibc turned PTRACE_SYSEMU/_SINGLESTEP into a enum and
UML failed to build.

Let's drop our define and rely on the fact that every libc has
PTRACE_SYSEMU/_SINGLESTEP.

Cc: <stable@vger.kernel.org>
Cc: Ritesh Raj Sarraf <rrs@researchut.com>
Reported-and-tested-by: Ritesh Raj Sarraf <rrs@researchut.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix boot parameters address translation

commit 40dc948f234b73497c3278875eb08a01d5854d3f upstream.

The bootloader may pass physical address of the boot parameters structure
to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in
the arch/xtensa/kernel/head.S is supposed to map that physical address to
the virtual address in the configured virtual memory layout.

This code haven't been updated when additional 256+256 and 512+512
memory layouts were introduced and it may produce wrong addresses when
used with these layouts.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: make sure bFLT stack is 16 byte aligned

commit 0773495b1f5f1c5e23551843f87b5ff37e7af8f7 upstream.

Xtensa ABI requires stack alignment to be at least 16. In noMMU
configuration ARCH_SLAB_MINALIGN is used to align stack. Make it at
least 16.

This fixes the following runtime error in noMMU configuration, caused by
interaction between insufficiently aligned stack and alloca function,
that results in corruption of on-stack variable in the libc function
glob:

 Caught unhandled exception in 'sh' (pid = 47, pc = 0x02d05d65)
  - should not happen
  EXCCAUSE is 15

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: add NOTES section to the linker script

commit 4119ba211bc4f1bf638f41e50b7a0f329f58aa16 upstream.

This section collects all source .note.* sections together in the
vmlinux image. Without it .note.Linux section may be placed at address
0, while the rest of the kernel is at its normal address, resulting in a
huge vmlinux.bin image that may not be linked into the xtensa Image.elf.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Loongson-3: Fix BRIDGE irq delivery problem

[ Upstream commit 360fe725f8849aaddc53475fef5d4a0c439b05ae ]

After commit e509bd7da149dc349160 ("genirq: Allow migration of chained
interrupts by installing default action") Loongson-3 fails at here:

setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);

This is because both chained_action and cascade_irqaction don't have
IRQF_SHARED flag. This will cause Loongson-3 resume fails because HPET
timer interrupt can't be delivered during S3. So we set the irqchip of
the chained irq to loongson_irq_chip which doesn't disable the chained
irq in CP0.Status.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20434/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Loongson-3: Fix CPU UART irq delivery problem

[ Upstream commit d06f8a2f1befb5a3d0aa660ab1c05e9b744456ea ]

Masking/unmasking the CPU UART irq in CP0_Status (and redirecting it to
other CPUs) may cause interrupts be lost, especially in multi-package
machines (Package-0's UART irq cannot be delivered to others). So make
mask_loongson_irq() and unmask_loongson_irq() be no-ops.

The original problem (UART IRQ may deliver to any core) is also because
of masking/unmasking the CPU UART irq in CP0_Status. So it is safe to
remove all of the stuff.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20433/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: fix recursive oi->lock in ovl_link()

commit 6cd078702f2f33cb6b19a682de3e9184112f1a46 upstream.

linking a non-copied-up file into a non-copied-up parent results in a
nested call to mutex_lock_interruptible(&oi->lock). Fix this by copying up
target parent before ovl_nlink_start(), same as done in ovl_rename().

~/unionmount-testsuite$ ./run --ov -s
~/unionmount-testsuite$ ln /mnt/a/foo100 /mnt/a/dir100/

 WARNING: possible recursive locking detected
 --------------------------------------------
 ln/1545 is trying to acquire lock:
 00000000bcce7c4c (&ovl_i_lock_key[depth]){+.+.}, at:
     ovl_copy_up_start+0x28/0x7d
 but task is already holding lock:
 0000000026d73d5b (&ovl_i_lock_key[depth]){+.+.}, at:
     ovl_nlink_start+0x3c/0xc1

[SzM: this seems to be a false positive, but doing the copy-up first is
harmless and removes the lockdep splat]

Reported-by: syzbot+3ef5c0d1a5cb0b21e6be@syzkaller.appspotmail.com
Fixes: 5f8415d6b87e ("ovl: persistent overlay inode nlink for...")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[amir: backport to v4.18]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: set FR_SENT while locked

commit 4c316f2f3ff315cb48efb7435621e5bfb81df96d upstream.

Otherwise fuse_dev_do_write() could come in and finish off the request, and
the set_bit(FR_SENT, ...) could trigger the WARN_ON(test_bit(FR_SENT, ...))
in request_end().

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: syzbot+ef054c4d3f64cd7f7cec@syzkaller.appspotmai
Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix blocked_waitq wakeup

commit 908a572b80f6e9577b45e81b3dfe2e22111286b8 upstream.

Using waitqueue_active() is racy.  Make sure we issue a wake_up()
unconditionally after storing into fc->blocked.  After that it's okay to
optimize with waitqueue_active() since the first wake up provides the
necessary barrier for all waiters, not the just the woken one.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3c18ef8117f0 ("fuse: optimize wake_up")
Cc: <stable@vger.kernel.org> # v3.10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix use-after-free in fuse_dev_do_write()

commit d2d2d4fb1f54eff0f3faa9762d84f6446a4bc5d0 upstream.

After we found req in request_find() and released the lock,
everything may happen with the req in parallel:

cpu0                              cpu1
fuse_dev_do_write()               fuse_dev_do_write()
  req = request_find(fpq, ...)    ...
  spin_unlock(&fpq->lock)         ...
  ...                             req = request_find(fpq, oh.unique)
  ...                             spin_unlock(&fpq->lock)
  queue_interrupt(&fc->iq, req);   ...
  ...                              ...
  ...                              ...
  request_end(fc, req);
    fuse_put_request(fc, req);
  ...                              queue_interrupt(&fc->iq, req);

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix use-after-free in fuse_dev_do_read()

commit bc78abbd55dd28e2287ec6d6502b842321a17c87 upstream.

We may pick freed req in this way:

[cpu0]                                  [cpu1]
fuse_dev_do_read()                      fuse_dev_do_write()
   list_move_tail(&req->list, ...);     ...
   spin_unlock(&fpq->lock);             ...
   ...                                  request_end(fc, req);
   ...                                    fuse_put_request(fc, req);
   if (test_bit(FR_INTERRUPTED, ...))
         queue_interrupt(fiq, req);

Fix that by keeping req alive until we finish all manipulations.

Reported-by: syzbot+4e975615ca01f2277bdd@syzkaller.appspotmail.com
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix re-using LoopID when handle is in use

commit 5c6400536481d9ef44ef94e7bf2c7b8e81534db7 upstream.

This patch fixes issue where driver clears NPort ID map instead of marking
handle in use. Once driver clears NPort ID from the database, it can reuse
the same NPort ID resulting in a PLOGI failure.

[mkp: fixed Himanshu's SoB]

Fixes: a084fd68e1d2 ("scsi: qla2xxx: Fix re-login for Nport Handle in use")
Cc: <stable@vger.kernel.org>
Signed-of-by: Quinn Tran <quinn.tran@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Himanshu Madhani <hmadhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: shutdown chip if reset fail

commit 1e4ac5d6fe0a4af17e4b6251b884485832bf75a3 upstream.

If chip unable to fully initialize, use full shutdown sequence to clear out
any stale FW state.

Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: stable@vger.kernel.org #4.10
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Remove stale debug trace message from tcm_qla2xxx

commit 7c388f91ec1a59b0ed815b07b90536e2d57e1e1f upstream.

Remove stale debug trace.

Fixes: 1eb42f965ced ("qla2xxx: Make trace flags more readable")
Cc: stable@vger.kernel.org #4.10
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix process response queue for ISP26XX and above

commit b86ac8fd4b2f6ec2f9ca9194c56eac12d620096f upstream.

This patch improves performance for 16G and above adapter by removing
additional call to process_response_queue().

[mkp: typo]

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix incorrect port speed being set for FC adapters

commit 4c1458df9635c7e3ced155f594d2e7dfd7254e21 upstream.

Fixes: 6246b8a1d26c7c ("[SCSI] qla2xxx: Enhancements to support ISP83xx.")
Fixes: 1bb395485160d2 ("qla2xxx: Correct iiDMA-update calling conventions.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix error handling in ovl_verify_set_fh()

commit babf4770be0adc69e6d2de150f4040f175e24beb upstream.

We hit a BUG on kfree of an ERR_PTR()...

Reported-by: syzbot+ff03fe05c717b82502d0@syzkaller.appspotmail.com
Fixes: 8b88a2e64036 ("ovl: verify upper root dir matches lower root dir")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdrom: fix improper type cast, which can leat to information leak.

commit e4f3aa2e1e67bb48dfbaaf1cad59013d5a5bc276 upstream.

There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().

This issue is similar to CVE-2018-16658 and CVE-2018-10940.

Signed-off-by: Young_X <YangX92@hotmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: clear dangling pointers in p9stat_free

[ Upstream commit 62e3941776fea8678bb8120607039410b1b61a65 ]

p9stat_free is more of a cleanup function than a 'free' function as it
only frees the content of the struct; there are chances of use-after-free
if it is improperly used (e.g. p9stat_free called twice as it used to be
possible to)

Clearing dangling pointers makes the function idempotent and safer to use.

Link: http://lkml.kernel.org/r/1535410108-20650-2-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p locks: fix glock.client_id leak in do_lock

[ Upstream commit b4dc44b3cac9e8327e0655f530ed0c46f2e6214c ]

the 9p client code overwrites our glock.client_id pointing to a static
buffer by an allocated string holding the network provided value which
we do not care about; free and reset the value as appropriate.

This is almost identical to the leak in v9fs_file_getlock() fixed by
Al Viro in commit ce85dd58ad5a6 ("9p: we are leaking glock.client_id
in v9fs_file_getlock()"), which was returned as an error by a coverity
false positive -- while we are here attempt to make the code slightly
more robust to future change of the net/9p/client code and hopefully
more clear to coverity that there is no problem.

Link: http://lkml.kernel.org/r/1536339057-21974-5-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:ad7606: fix voltage scales

[ Upstream commit 4ee033301c898dd0835d035d0e0eb768a3d35da1 ]

Fixes commit 17be2a2905a6ec9aa27cd59521495e2f490d2af0 ("staging: iio:
ad7606: replace range/range_available with corresponding scale").

The AD7606 devices don't have a 2.5V voltage range, they have 5V & 10V
voltage range, which is selectable via the `gpio_range` descriptor.

The scales also seem to have been miscomputed, because when they were
applied to the raw values, the results differ from the expected values.
After checking the ADC transfer function in the datasheet, these were
re-computed.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/selftests: Wait all threads to join

[ Upstream commit 693b31b2fc1636f0aa7af53136d3b49f6ad9ff39 ]

Test tm-tmspr might exit before all threads stop executing, because it just
waits for the very last thread to join before proceeding/exiting.

This patch makes sure that all threads that were created will join before
proceeding/exiting.

This patch also guarantees that the amount of threads being created is equal
to thread_num.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: tvp5150: fix width alignment during set_selection()

[ Upstream commit bd24db04101f45a9c1d874fe21b0c7eab7bcadec ]

The driver ignored the width alignment which exists due to the UYVY
colorspace format. Fix the width alignment and make use of the the
provided v4l2 helper function to set the width, height and all
alignments in one.

Fixes: 963ddc63e20d ("[media] media: tvp5150: Add cropping support")

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sc16is7xx: Fix for multi-channel stall

[ Upstream commit 8344498721059754e09d30fe255a12dab8fb03ef ]

The SC16IS752 is a dual-channel device. The two channels are largely
independent, but the IRQ signals are wired together as an open-drain,
active low signal which will be driven low while either of the
channels requires attention, which can be for significant periods of
time until operations complete and the interrupt can be acknowledged.
In that respect it is should be treated as a true level-sensitive IRQ.

The kernel, however, needs to be able to exit interrupt context in
order to use I2C or SPI to access the device registers (which may
involve sleeping).  Therefore the interrupt needs to be masked out or
paused in some way.

The usual way to manage sleeping from within an interrupt handler
is to use a threaded interrupt handler - a regular interrupt routine
does the minimum amount of work needed to triage the interrupt before
waking the interrupt service thread. If the threaded IRQ is marked as
IRQF_ONESHOT the kernel will automatically mask out the interrupt
until the thread runs to completion. The sc16is7xx driver used to
use a threaded IRQ, but a patch switched to using a kthread_worker
in order to set realtime priorities on the handler thread and for
other optimisations. The end result is non-threaded IRQ that
schedules some work then returns IRQ_HANDLED, making the kernel
think that all IRQ processing has completed.

The work-around to prevent a constant stream of interrupts is to
mark the interrupt as edge-sensitive rather than level-sensitive,
but interpreting an active-low source as a falling-edge source
requires care to prevent a total cessation of interrupts. Whereas
an edge-triggering source will generate a new edge for every interrupt
condition a level-triggering source will keep the signal at the
interrupting level until it no longer requires attention; in other
words, the host won't see another edge until all interrupt conditions
are cleared. It is therefore vital that the interrupt handler does not
exit with an outstanding interrupt condition, otherwise the kernel
will not receive another interrupt unless some other operation causes
the interrupt state on the device to be cleared.

The existing sc16is7xx driver has a very simple interrupt "thread"
(kthread_work job) that processes interrupts on each channel in turn
until there are no more. If both channels are active and the first
channel starts interrupting while the handler for the second channel
is running then it will not be detected and an IRQ stall ensues. This
could be handled easily if there was a shared IRQ status register, or
a convenient way to determine if the IRQ had been deasserted for any
length of time, but both appear to be lacking.

Avoid this problem (or at least make it much less likely to happen)
by reducing the granularity of per-channel interrupt processing
to one condition per iteration, only exiting the overall loop when
both channels are no longer interrupting.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS/PCI: Call pcie_bus_configure_settings() to set MPS/MRRS

[ Upstream commit 2794f688b2c336e0da85e9f91fed33febbd9f54a ]

Call pcie_bus_configure_settings() on MIPS, like for other platforms.
The function pcie_bus_configure_settings() makes sure the MPS (Max
Payload Size) across the bus is uniform and provides the ability to
tune the MRSS (Max Read Request Size) and MPS (Max Payload Size) to
higher performance values. Some devices will not operate properly if
these aren't set correctly because the firmware doesn't always do it.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20649/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/memtrace: Remove memory in chunks

[ Upstream commit 3f7daf3d7582dc6628ac40a9045dd1bbd80c5f35 ]

When hot-removing memory release_mem_region_adjustable() splits iomem
resources if they are not the exact size of the memory being
hot-deleted. Adding this memory back to the kernel adds a new resource.

Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from
0xf40000000 results in the single resource 0x0-0xfffffffff being split
into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff.

When we hot-add the memory back we now have three resources:
0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff.

This is an issue if we try to remove some memory that overlaps
resources. Eg when trying to remove 2GB at address 0xf40000000,
release_mem_region_adjustable() fails as it expects the chunk of memory
to be within the boundaries of a single resource. We then get the
warning: "Unable to release resource" and attempting to use memtrace
again gives us this error: "bash: echo: write error: Resource
temporarily unavailable"

This patch makes memtrace remove memory in chunks that are always the
same size from an address that is always equal to end_of_memory -
n*size, for some n. So hotremoving and hotadding memory of different
sizes will now not attempt to remove memory that spans multiple
resources.

Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/boot: Ensure _zimage_start is a weak symbol

[ Upstream commit ee9d21b3b3583712029a0db65a4b7c081d08d3b3 ]

When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:

 $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
 0000000000000058 g       .text  0000000000000000 _zimage_start

 ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
 (.text+0x58): multiple definition of '_zimage_start';
 arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here

Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:

 This directive sets the weak attribute on the comma separated list of
 symbol names. If the symbols do not already exist, they will be
 created.

So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].

Changing it to be after the declaration fixes building with Clang, and
still works with GCC.

 $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
 0000000000000058  w      .text 0000000000000000 _zimage_start

Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921

[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: kexec: Mark CPU offline before disabling local IRQ

[ Upstream commit dc57aaf95a516f70e2d527d8287a0332c481a226 ]

After changing CPU online status, it will not be sent any IPIs such as in
__flush_cache_all() on software coherency systems. Do this before disabling
local IRQ.

Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20571/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: rachel.mozes@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: coda: don't overwrite h.264 profile_idc on decoder instance

[ Upstream commit 1f32061e843205f6fe8404d5100d5adcec334e75 ]

On a decoder instance, after the profile has been parsed from the stream
__v4l2_ctrl_s_ctrl() is called to notify userspace about changes in the
read-only profile control. This ends up calling back into the CODA driver
where a missing check on the s_ctrl caused the profile information that has
just been parsed from the stream to be overwritten with the default
baseline profile.

Later on the driver fails to enable frame reordering, based on the wrong
profile information.

Fixes: 347de126d1da (media: coda: add read-only h.264 decoder
                     profile/level controls)

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: pci: cx23885: handle adding to list failure

[ Upstream commit c5d59528e24ad22500347b199d52b9368e686a42 ]

altera_hw_filt_init() which calls append_internal() assumes
that the node was successfully linked in while in fact it can
silently fail. So the call-site needs to set return to -ENOMEM
on append_internal() returning NULL and exit through the err path.

Fixes: 349bcf02e361 ("[media] Altera FPGA based CI driver module")

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer pointer

[ Upstream commit 331d880b35a76b5de0eec8cbcecbf615d758a5f9 ]

In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails
with error, do not store the error code in the HiBMC device frame-buffer
pointer, as this will be later checked for non-zero value in
hibmc_fbdev_destroy() when our intention is to check for a valid function
pointer.

This fixes the following crash:
[    9.699791] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a
[    9.708672] Mem abort info:
[    9.711489]   ESR = 0x96000004
[    9.714570]   Exception class = DABT (current EL), IL = 32 bits
[    9.720551]   SET = 0, FnV = 0
[    9.723631]   EA = 0, S1PTW = 0
[    9.726799] Data abort info:
[    9.729702]   ISV = 0, ISS = 0x00000004
[    9.733573]   CM = 0, WnR = 0
[    9.736566] [000000000000001a] user address but active_mm is swapper
[    9.742987] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    9.748614] Modules linked in:
[    9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G        W         4.19.0-rc4-next-20180920-00001-g9b0012c #322
[    9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
[    9.771915] Workqueue: events work_for_cpu_fn
[    9.776312] pstate: 60000005 (nZCv daif -PAN -UAO)
[    9.781150] pc : drm_mode_object_put+0x0/0x20
[    9.785547] lr : hibmc_fbdev_fini+0x40/0x58
[    9.789767] sp : ffff00000af1bcf0
[    9.793108] x29: ffff00000af1bcf0 x28: 0000000000000000
[    9.798473] x27: 0000000000000000 x26: ffff000008f66630
[    9.803838] x25: 0000000000000000 x24: ffff0000095abb98
[    9.809203] x23: ffff8017db92fe00 x22: ffff8017d2b13000
[    9.814568] x21: ffffffffffffffea x20: ffff8017d2f80018
[    9.819933] x19: ffff8017d28a0018 x18: ffffffffffffffff
[    9.825297] x17: 0000000000000000 x16: 0000000000000000
[    9.830662] x15: ffff0000092296c8 x14: ffff00008939970f
[    9.836026] x13: ffff00000939971d x12: ffff000009229940
[    9.841391] x11: ffff0000085f8fc0 x10: ffff00000af1b9a0
[    9.846756] x9 : 000000000000000d x8 : 6620657a696c6169
[    9.852121] x7 : ffff8017d3340580 x6 : ffff8017d4168000
[    9.857486] x5 : 0000000000000000 x4 : ffff8017db92fb20
[    9.862850] x3 : 0000000000002690 x2 : ffff8017d3340480
[    9.868214] x1 : 0000000000000028 x0 : 0000000000000002
[    9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____))
[    9.880788] Call trace:
[    9.883252]  drm_mode_object_put+0x0/0x20
[    9.887297]  hibmc_unload+0x1c/0x80
[    9.890815]  hibmc_pci_probe+0x170/0x3c8
[    9.894773]  local_pci_probe+0x3c/0xb0
[    9.898555]  work_for_cpu_fn+0x18/0x28
[    9.902337]  process_one_work+0x1e0/0x318
[    9.906382]  worker_thread+0x228/0x450
[    9.910164]  kthread+0x128/0x130
[    9.913418]  ret_from_fork+0x10/0x18
[    9.917024] Code: a94153f3 a8c27bfd d65f03c0 d503201f (f9400c01)
[    9.923180] ---[ end trace 2695ffa0af5be375 ]---

Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: fix memory barrier bug in DMM driver

[ Upstream commit 538f66ba204944470a653a4cccc5f8befdf97c22 ]

A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.

Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.

The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.

This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):

 * If a DMM timeout happened when a GEM buffer was being pinned for
   display on the screen, a timeout error would be shown, but the driver
   would continue programming DSS HW with broken buffer, leading to
   SYNCLOST floods and possible crashes.

 * If a DMM timeout happened when other user (say, video decoder) was
   pinning a GEM buffer, a timeout would be shown but if the user
   handled the error properly, no other issues followed.

 * If a DMM timeout happened when a GEM buffer was being released, the
   driver does not even notice the error, leading to crashes or hang
   later.

This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.

The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Don't report hugepage tables as memory leaks when using kmemleak

[ Upstream commit 803d690e68f0c5230183f1a42c7d50a41d16e380 ]

When a process allocates a hugepage, the following leak is
reported by kmemleak. This is a false positive which is
due to the pointer to the table being stored in the PGD
as physical memory address and not virtual memory pointer.

unreferenced object 0xc30f8200 (size 512):
  comm "mmap", pid 374, jiffies 4872494 (age 627.630s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<e32b68da>] huge_pte_alloc+0xdc/0x1f8
    [<9e0df1e1>] hugetlb_fault+0x560/0x8f8
    [<7938ec6c>] follow_hugetlb_page+0x14c/0x44c
    [<afbdb405>] __get_user_pages+0x1c4/0x3dc
    [<b8fd7cd9>] __mm_populate+0xac/0x140
    [<3215421e>] vm_mmap_pgoff+0xb4/0xb8
    [<c148db69>] ksys_mmap_pgoff+0xcc/0x1fc
    [<4fcd760f>] ret_from_syscall+0x0/0x38

See commit a984506c542e2 ("powerpc/mm: Don't report PUDs as
memory leaks when using kmemleak") for detailed explanation.

To fix that, this patch tells kmemleak to ignore the allocated
hugepage table.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/nohash: fix undefined behaviour when testing page size support

[ Upstream commit f5e284803a7206d43e26f9ffcae5de9626d95e37 ]

When enumerating page size definitions to check hardware support,
we construct a constant which is (1U << (def->shift - 10)).

However, the array of page size definitions is only initalised for
various MMU_PAGE_* constants, so it contains a number of 0-initialised
elements with def->shift == 0. This means we end up shifting by a
very large number, which gives the following UBSan splat:

================================================================================
UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21
shift exponent 4294967286 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6
Call Trace:
[c00000000101bc20] [c000000000a13d54] .dump_stack+0xa8/0xec (unreliable)
[c00000000101bcb0] [c0000000004f20a8] .ubsan_epilogue+0x18/0x64
[c00000000101bd30] [c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4
[c00000000101be20] [c000000000d21760] .early_init_mmu+0x1b4/0x5a0
[c00000000101bf10] [c000000000d1ba28] .early_setup+0x100/0x130
[c00000000101bf90] [c000000000000528] start_here_multiplatform+0x68/0x80
================================================================================

Fix this by first checking if the element exists (shift != 0) before
constructing the constant.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL

[ Upstream commit 35d3cbe84544da74e39e1cec01374092467e3119 ]

Andreas Müller reports:

"Fixes:

| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported

and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights."

Select the CONFIG_TMPFS_POSIX_ACL option to fix these issues.

Reported-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: check name length in tty_find_polling_driver()

[ Upstream commit 33a1a7be198657c8ca26ad406c4d2a89b7162bcc ]

The issue is found by a fuzzing test.
If tty_find_polling_driver() recevies an incorrect input such as
',,' or '0b', the len becomes 0 and strncmp() always return 0.
In this case, a null p->ops->poll_init() is called and it causes a kernel
panic.

Fix this by checking name length against zero in tty_find_polling_driver().

$echo ,, > /sys/module/kgdboc/parameters/kgdboc
[   20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457
uart_get_baud_rate+0xe8/0x190
[   20.804917] Modules linked in:
[   20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8
[   20.805469] Hardware name: linux,dummy-virt (DT)
[   20.805732] pstate: 20000005 (nzCv daif -PAN -UAO)
[   20.805895] pc : uart_get_baud_rate+0xe8/0x190
[   20.806042] lr : uart_get_baud_rate+0xc0/0x190
[   20.806476] sp : ffffffc06acff940
[   20.806676] x29: ffffffc06acff940 x28: 0000000000002580
[   20.806977] x27: 0000000000009600 x26: 0000000000009600
[   20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0
[   20.807576] x23: 0000000000000001 x22: 0000000000000000
[   20.807807] x21: 0000000000000001 x20: 0000000000000000
[   20.808049] x19: ffffffc06acffac8 x18: 0000000000000000
[   20.808277] x17: 0000000000000000 x16: 0000000000000000
[   20.808520] x15: ffffffffffffffff x14: ffffffff00000000
[   20.808757] x13: ffffffffffffffff x12: 0000000000000001
[   20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f
[   20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[   20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[   20.809803] x5 : 0000000080008001 x4 : 0000000000000003
[   20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000
[   20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0
[   20.811005] Call trace:
[   20.811214]  uart_get_baud_rate+0xe8/0x190
[   20.811479]  serial8250_do_set_termios+0xe0/0x6f4
[   20.811719]  serial8250_set_termios+0x48/0x54
[   20.811928]  uart_set_options+0x138/0x1bc
[   20.812129]  uart_poll_init+0x114/0x16c
[   20.812330]  tty_find_polling_driver+0x158/0x200
[   20.812545]  configure_kgdboc+0xbc/0x1bc
[   20.812745]  param_set_kgdboc_var+0xb8/0x150
[   20.812960]  param_attr_store+0xbc/0x150
[   20.813160]  module_attr_store+0x40/0x58
[   20.813364]  sysfs_kf_write+0x8c/0xa8
[   20.813563]  kernfs_fop_write+0x154/0x290
[   20.813764]  vfs_write+0xf0/0x278
[   20.813951]  __arm64_sys_write+0x84/0xf4
[   20.814400]  el0_svc_common+0xf4/0x1dc
[   20.814616]  el0_svc_handler+0x98/0xbc
[   20.814804]  el0_svc+0x8/0xc
[   20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[   20.826913] Mem abort info:
[   20.827103]   ESR = 0x84000006
[   20.827352]   Exception class = IABT (current EL), IL = 16 bits
[   20.827655]   SET = 0, FnV = 0
[   20.827855]   EA = 0, S1PTW = 0
[   20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____)
[   20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000
[   20.829195] Internal error: Oops: 84000006 [#1] SMP
[   20.829564] Modules linked in:
[   20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G        W         4.19.0-rc7ajb #8
[   20.830545] Hardware name: linux,dummy-virt (DT)
[   20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   20.831174] pc :           (null)
[   20.831457] lr : serial8250_do_set_termios+0x358/0x6f4
[   20.831727] sp : ffffffc06acff9b0
[   20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000
[   20.832267] x27: ffffff900969e16f x26: 0000000000000000
[   20.832589] x25: ffffff900969dfb0 x24: 0000000000000000
[   20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160
[   20.833232] x21: 0000000000000000 x20: ffffffc06acffac8
[   20.833559] x19: ffffff900969df90 x18: 0000000000000000
[   20.833878] x17: 0000000000000000 x16: 0000000000000000
[   20.834491] x15: ffffffffffffffff x14: ffffffff00000000
[   20.834821] x13: ffffffffffffffff x12: 0000000000000001
[   20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f
[   20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[   20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[   20.836111] x5 : c06419717c314100 x4 : 0000000000000007
[   20.836419] x3 : 0000000000000000 x2 : 0000000000000000
[   20.836732] x1 : 0000000000000001 x0 : ffffff900969df90
[   20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____))
[   20.837396] Call trace:
[   20.837566]            (null)
[   20.837816]  serial8250_set_termios+0x48/0x54
[   20.838089]  uart_set_options+0x138/0x1bc
[   20.838570]  uart_poll_init+0x114/0x16c
[   20.838834]  tty_find_polling_driver+0x158/0x200
[   20.839119]  configure_kgdboc+0xbc/0x1bc
[   20.839380]  param_set_kgdboc_var+0xb8/0x150
[   20.839658]  param_attr_store+0xbc/0x150
[   20.839920]  module_attr_store+0x40/0x58
[   20.840183]  sysfs_kf_write+0x8c/0xa8
[   20.840183]  sysfs_kf_write+0x8c/0xa8
[   20.840440]  kernfs_fop_write+0x154/0x290
[   20.840702]  vfs_write+0xf0/0x278
[   20.840942]  __arm64_sys_write+0x84/0xf4
[   20.841209]  el0_svc_common+0xf4/0x1dc
[   20.841471]  el0_svc_handler+0x98/0xbc
[   20.841713]  el0_svc+0x8/0xc
[   20.842057] Code: bad PC value
[   20.842764] ---[ end trace a8835d7de79aaadf ]---
[   20.843134] Kernel panic - not syncing: Fatal exception
[   20.843515] SMP: stopping secondary CPUs
[   20.844289] Kernel Offset: disabled
[   20.844634] CPU features: 0x0,21806002
[   20.844857] Memory Limit: none
[   20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]---

Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/eeh: Fix possible null deref in eeh_dump_dev_log()

[ Upstream commit f9bc28aedfb5bbd572d2d365f3095c1becd7209b ]

If an error occurs during an unplug operation, it's possible for
eeh_dump_dev_log() to be called when edev->pdn is null, which
currently leads to dereferencing a null pointer.

Handle this by skipping the error log for those devices.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix page table dump to work on Radix

[ Upstream commit 0d923962ab69c27cca664a2d535e90ef655110ca ]

When we're running on Book3S with the Radix MMU enabled the page table
dump currently prints the wrong addresses because it uses the wrong
start address.

Fix it to use PAGE_OFFSET rather than KERN_VIRT_START.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64/module: REL32 relocation range check

[ Upstream commit b851ba02a6f3075f0f99c60c4bc30a4af80cf428 ]

The recent module relocation overflow crash demonstrated that we
have no range checking on REL32 relative relocations. This patch
implements a basic check, the same kernel that previously oopsed
and rebooted now continues with some of these errors when loading
the module:

  module_64: x_tables: REL32 527703503449812 out of range!

Possibly other relocations (ADDR32, REL16, TOC16, etc.) should also have
overflow checks.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/traps: restore recoverability of machine_check interrupts

[ Upstream commit daf00ae71dad8aa05965713c62558aeebf2df48e ]

commit b96672dd840f ("powerpc: Machine check interrupt is a non-
maskable interrupt") added a call to nmi_enter() at the beginning of
machine check restart exception handler. Due to that, in_interrupt()
always returns true regardless of the state before entering the
exception, and die() panics even when the system was not already in
interrupt.

This patch calls nmi_exit() before calling die() in order to restore
the interrupt state we had before calling nmi_enter()

Fixes: b96672dd840f ("powerpc: Machine check interrupt is a non-maskable interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.81

MD: fix invalid stored role for a disk - try2

commit 9e753ba9b9b405e3902d9f08aec5f2ea58a0c317 upstream.

Commit d595567dc4f0 (MD: fix invalid stored role for a disk) broke linear
hotadd. Let's only fix the role for disks in raid1/10.
Based on Guoqing's original patch.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: wait for running BPF programs when updating map-in-map

commit 1ae80cf31938c8f77c37a29bbe29e7f1cd492be8 upstream.

The map-in-map frequently serves as a mechanism for atomic
snapshotting of state that a BPF program might record.  The current
implementation is dangerous to use in this way, however, since
userspace has no way of knowing when all programs that might have
retrieved the "old" value of the map may have completed.

This change ensures that map update operations on map-in-map map types
always wait for all references to the old map to drop before returning
to userspace.

Signed-off-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[fengc@google.com: 4.14 backport: adjust context]
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: Remove TCA_OPTIONS from policy

commit e72bde6b66299602087c8c2350d36a525e75d06e upstream.

Marco reported an error with hfsc:
root@Calimero:~# tc qdisc add dev eth0 root handle 1:0 hfsc default 1
Error: Attribute failed policy validation.

Apparently a few implementations pass TCA_OPTIONS as a binary instead
of nested attribute, so drop TCA_OPTIONS from the policy.

Fixes: 8b4c3cdd9dd8 ("net: sched: Add policy validation for tc attributes")
Reported-by: Marco Berizzi <pupilla@libero.it>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix fsync after hole punching when using no-holes feature

commit 4ee3fad34a9cc2cf33303dfbd0cf554248651c86 upstream.

When we have the no-holes mode enabled and fsync a file after punching a
hole in it, we can end up not logging the whole hole range in the log tree.
This happens if the file has extent items that span more than one leaf and
we punch a hole that covers a range that starts in a leaf but does not go
beyond the offset of the first extent in the next leaf.

Example:

  $ mkfs.btrfs -f -O no-holes -n 65536 /dev/sdb
  $ mount /dev/sdb /mnt
  $ for ((i = 0; i <= 831; i++)); do
offset=$((i * 2 * 256 * 1024))
xfs_io -f -c "pwrite -S 0xab -b 256K $offset 256K" \
/mnt/foobar >/dev/null
    done
  $ sync

  # We now have 2 leafs in our filesystem fs tree, the first leaf has an
  # item corresponding the extent at file offset 216530944 and the second
  # leaf has a first item corresponding to the extent at offset 217055232.
  # Now we punch a hole that partially covers the range of the extent at
  # offset 216530944 but does go beyond the offset 217055232.

  $ xfs_io -c "fpunch $((216530944 + 128 * 1024 - 4000)) 256K" /mnt/foobar
  $ xfs_io -c "fsync" /mnt/foobar

  <power fail>

  # mount to replay the log
  $ mount /dev/sdb /mnt

  # Before this patch, only the subrange [216658016, 216662016[ (length of
  # 4000 bytes) was logged, leaving an incorrect file layout after log
  # replay.

Fix this by checking if there is a hole between the last extent item that
we processed and the first extent item in the next leaf, and if there is
one, log an explicit hole extent item.

Fixes: 16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix use-after-free when dumping free space

commit 9084cb6a24bf5838a665af92ded1af8363f9e563 upstream.

We were iterating a block group's free space cache rbtree without locking
first the lock that protects it (the free_space_ctl->free_space_offset
rbtree is protected by the free_space_ctl->tree_lock spinlock).

KASAN reported an use-after-free problem when iterating such a rbtree due
to a concurrent rbtree delete:

[ 9520.359168] ==================================================================
[ 9520.359656] BUG: KASAN: use-after-free in rb_next+0x13/0x90
[ 9520.359949] Read of size 8 at addr ffff8800b7ada500 by task btrfs-transacti/1721
[ 9520.360357]
[ 9520.360530] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G             L    4.19.0-rc8-nbor #555
[ 9520.360990] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.362682] Call Trace:
[ 9520.362887]  dump_stack+0xa4/0xf5
[ 9520.363146]  print_address_description+0x78/0x280
[ 9520.363412]  kasan_report+0x263/0x390
[ 9520.363650]  ? rb_next+0x13/0x90
[ 9520.363873]  __asan_load8+0x54/0x90
[ 9520.364102]  rb_next+0x13/0x90
[ 9520.364380]  btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.364697]  dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.364997]  btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.365310]  __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.365646]  ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.365923]  ? _raw_spin_unlock+0x27/0x40
[ 9520.366204]  ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.366549]  btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.366880]  cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.367220]  ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.367518]  ? lock_downgrade+0x2f0/0x2f0
[ 9520.367799]  ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.368104]  ? kasan_check_read+0x11/0x20
[ 9520.368349]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.368638]  btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.368978]  ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.369282]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.369534]  ? _raw_spin_unlock+0x27/0x40
[ 9520.369811]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.370137]  commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.370560]  ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.370926]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.371285]  btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.371612]  ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.371943]  ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.372257]  transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.372537]  kthread+0x1d2/0x1f0
[ 9520.372793]  ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.373090]  ? kthread_park+0xb0/0xb0
[ 9520.373329]  ret_from_fork+0x3a/0x50
[ 9520.373567]
[ 9520.373738] Allocated by task 1804:
[ 9520.373974]  kasan_kmalloc+0xff/0x180
[ 9520.374208]  kasan_slab_alloc+0x11/0x20
[ 9520.374447]  kmem_cache_alloc+0xfc/0x2d0
[ 9520.374731]  __btrfs_add_free_space+0x40/0x580 [btrfs]
[ 9520.375044]  unpin_extent_range+0x4f7/0x7a0 [btrfs]
[ 9520.375383]  btrfs_finish_extent_commit+0x15f/0x4d0 [btrfs]
[ 9520.375707]  btrfs_commit_transaction+0xb06/0x10e0 [btrfs]
[ 9520.376027]  btrfs_alloc_data_chunk_ondemand+0x237/0x5c0 [btrfs]
[ 9520.376365]  btrfs_check_data_free_space+0x81/0xd0 [btrfs]
[ 9520.376689]  btrfs_delalloc_reserve_space+0x25/0x80 [btrfs]
[ 9520.377018]  btrfs_direct_IO+0x42e/0x6d0 [btrfs]
[ 9520.377284]  generic_file_direct_write+0x11e/0x220
[ 9520.377587]  btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.377875]  aio_write+0x25c/0x360
[ 9520.378106]  io_submit_one+0xaa0/0xdc0
[ 9520.378343]  __se_sys_io_submit+0xfa/0x2f0
[ 9520.378589]  __x64_sys_io_submit+0x43/0x50
[ 9520.378840]  do_syscall_64+0x7d/0x240
[ 9520.379081]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.379387]
[ 9520.379557] Freed by task 1802:
[ 9520.379782]  __kasan_slab_free+0x173/0x260
[ 9520.380028]  kasan_slab_free+0xe/0x10
[ 9520.380262]  kmem_cache_free+0xc1/0x2c0
[ 9520.380544]  btrfs_find_space_for_alloc+0x4cd/0x4e0 [btrfs]
[ 9520.380866]  find_free_extent+0xa99/0x17e0 [btrfs]
[ 9520.381166]  btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
[ 9520.381474]  btrfs_get_blocks_direct+0x60b/0xbd0 [btrfs]
[ 9520.381761]  __blockdev_direct_IO+0x10ee/0x58a1
[ 9520.382059]  btrfs_direct_IO+0x25a/0x6d0 [btrfs]
[ 9520.382321]  generic_file_direct_write+0x11e/0x220
[ 9520.382623]  btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.382904]  aio_write+0x25c/0x360
[ 9520.383172]  io_submit_one+0xaa0/0xdc0
[ 9520.383416]  __se_sys_io_submit+0xfa/0x2f0
[ 9520.383678]  __x64_sys_io_submit+0x43/0x50
[ 9520.383927]  do_syscall_64+0x7d/0x240
[ 9520.384165]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.384439]
[ 9520.384610] The buggy address belongs to the object at ffff8800b7ada500
                which belongs to the cache btrfs_free_space of size 72
[ 9520.385175] The buggy address is located 0 bytes inside of
                72-byte region [ffff8800b7ada500, ffff8800b7ada548)
[ 9520.385691] The buggy address belongs to the page:
[ 9520.385957] page:ffffea0002deb680 count:1 mapcount:0 mapping:ffff880108a1d700 index:0x0 compound_mapcount: 0
[ 9520.388030] flags: 0x8100(slab|head)
[ 9520.388281] raw: 0000000000008100 ffffea0002deb608 ffffea0002728808 ffff880108a1d700
[ 9520.388722] raw: 0000000000000000 0000000000130013 00000001ffffffff 0000000000000000
[ 9520.389169] page dumped because: kasan: bad access detected
[ 9520.389473]
[ 9520.389658] Memory state around the buggy address:
[ 9520.389943]  ffff8800b7ada400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390368]  ffff8800b7ada480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390796] >ffff8800b7ada500: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc
[ 9520.391223]                    ^
[ 9520.391461]  ffff8800b7ada580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.391885]  ffff8800b7ada600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.392313] ==================================================================
[ 9520.392772] BTRFS critical (device vdc): entry offset 2258497536, bytes 131072, bitmap no
[ 9520.393247] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011
[ 9520.393705] PGD 800000010dbab067 P4D 800000010dbab067 PUD 107551067 PMD 0
[ 9520.394059] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 9520.394378] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G    B        L    4.19.0-rc8-nbor #555
[ 9520.394858] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.395350] RIP: 0010:rb_next+0x3c/0x90
[ 9520.396461] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.396762] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.397115] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.397468] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.397821] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.398188] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.398555] FS:  0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.399007] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.399335] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.399679] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.400023] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.400400] Call Trace:
[ 9520.400648]  btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.400974]  dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.401287]  btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.401609]  __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.401952]  ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.402232]  ? _raw_spin_unlock+0x27/0x40
[ 9520.402522]  ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.402882]  btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.403261]  cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.403570]  ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.403871]  ? lock_downgrade+0x2f0/0x2f0
[ 9520.404161]  ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.404481]  ? kasan_check_read+0x11/0x20
[ 9520.404732]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405026]  btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.405375]  ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.405694]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405958]  ? _raw_spin_unlock+0x27/0x40
[ 9520.406243]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.406574]  commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.406899]  ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.407253]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.407589]  btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.407925]  ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.408262]  ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.408582]  transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.408870]  kthread+0x1d2/0x1f0
[ 9520.409138]  ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.409440]  ? kthread_park+0xb0/0xb0
[ 9520.409682]  ret_from_fork+0x3a/0x50
[ 9520.410508] Dumping ftrace buffer:
[ 9520.410764]    (ftrace buffer empty)
[ 9520.411007] CR2: 0000000000000011
[ 9520.411297] ---[ end trace 01a0863445cf360a ]---
[ 9520.411568] RIP: 0010:rb_next+0x3c/0x90
[ 9520.412644] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.412932] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.413274] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.413616] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.414007] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.414349] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.416074] FS:  0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.416536] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.416848] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.418477] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.418846] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.419204] Kernel panic - not syncing: Fatal exception
[ 9520.419666] Dumping ftrace buffer:
[ 9520.419930]    (ftrace buffer empty)
[ 9520.420168] Kernel Offset: disabled
[ 9520.420406] ---[ end Kernel panic - not syncing: Fatal exception ]---

Fix this by acquiring the respective lock before iterating the rbtree.

Reported-by: Nikolay Borisov <nborisov@suse.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix use-after-free during inode eviction

commit 421f0922a2cfb0c75acd9746454aaa576c711a65 upstream.

At inode.c:evict_inode_truncate_pages(), when we iterate over the
inode's extent states, we access an extent state record's "state" field
after we unlocked the inode's io tree lock. This can lead to a
use-after-free issue because after we unlock the io tree that extent
state record might have been freed due to being merged into another
adjacent extent state record (a previous inflight bio for a read
operation finished in the meanwhile which unlocked a range in the io
tree and cause a merge of extent state records, as explained in the
comment before the while loop added in commit 6ca0709756710 ("Btrfs: fix
hang during inode eviction due to concurrent readahead")).

Fix this by keeping a copy of the extent state's flags in a local
variable and using it after unlocking the io tree.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201189
Fixes: b9d0b38928e2 ("btrfs: Add handler for invalidate page")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: move the dio_sem higher up the callchain

commit c495144bc6962186feae31d687596d2472000e45 upstream.

We're getting a lockdep splat because we take the dio_sem under the
log_mutex.  What we really need is to protect fsync() from logging an
extent map for an extent we never waited on higher up, so just guard the
whole thing with dio_sem.

======================================================
WARNING: possible circular locking dependency detected
4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411 Not tainted
------------------------------------------------------
aio-dio-invalid/30928 is trying to acquire lock:
0000000092621cfd (&mm->mmap_sem){++++}, at: get_user_pages_unlocked+0x5a/0x1e0

but task is already holding lock:
00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #5 (&ei->dio_sem){++++}:
       lock_acquire+0xbd/0x220
       down_write+0x51/0xb0
       btrfs_log_changed_extents+0x80/0xa40
       btrfs_log_inode+0xbaf/0x1000
       btrfs_log_inode_parent+0x26f/0xa80
       btrfs_log_dentry_safe+0x50/0x70
       btrfs_sync_file+0x357/0x540
       do_fsync+0x38/0x60
       __ia32_sys_fdatasync+0x12/0x20
       do_fast_syscall_32+0x9a/0x2f0
       entry_SYSENTER_compat+0x84/0x96

-> #4 (&ei->log_mutex){+.+.}:
       lock_acquire+0xbd/0x220
       __mutex_lock+0x86/0xa10
       btrfs_record_unlink_dir+0x2a/0xa0
       btrfs_unlink+0x5a/0xc0
       vfs_unlink+0xb1/0x1a0
       do_unlinkat+0x264/0x2b0
       do_fast_syscall_32+0x9a/0x2f0
       entry_SYSENTER_compat+0x84/0x96

-> #3 (sb_internal#2){.+.+}:
       lock_acquire+0xbd/0x220
       __sb_start_write+0x14d/0x230
       start_transaction+0x3e6/0x590
       btrfs_evict_inode+0x475/0x640
       evict+0xbf/0x1b0
       btrfs_run_delayed_iputs+0x6c/0x90
       cleaner_kthread+0x124/0x1a0
       kthread+0x106/0x140
       ret_from_fork+0x3a/0x50

-> #2 (&fs_info->cleaner_delayed_iput_mutex){+.+.}:
       lock_acquire+0xbd/0x220
       __mutex_lock+0x86/0xa10
       btrfs_alloc_data_chunk_ondemand+0x197/0x530
       btrfs_check_data_free_space+0x4c/0x90
       btrfs_delalloc_reserve_space+0x20/0x60
       btrfs_page_mkwrite+0x87/0x520
       do_page_mkwrite+0x31/0xa0
       __handle_mm_fault+0x799/0xb00
       handle_mm_fault+0x7c/0xe0
       __do_page_fault+0x1d3/0x4a0
       async_page_fault+0x1e/0x30

-> #1 (sb_pagefaults){.+.+}:
       lock_acquire+0xbd/0x220
       __sb_start_write+0x14d/0x230
       btrfs_page_mkwrite+0x6a/0x520
       do_page_mkwrite+0x31/0xa0
       __handle_mm_fault+0x799/0xb00
       handle_mm_fault+0x7c/0xe0
       __do_page_fault+0x1d3/0x4a0
       async_page_fault+0x1e/0x30

-> #0 (&mm->mmap_sem){++++}:
       __lock_acquire+0x42e/0x7a0
       lock_acquire+0xbd/0x220
       down_read+0x48/0xb0
       get_user_pages_unlocked+0x5a/0x1e0
       get_user_pages_fast+0xa4/0x150
       iov_iter_get_pages+0xc3/0x340
       do_direct_IO+0xf93/0x1d70
       __blockdev_direct_IO+0x32d/0x1c20
       btrfs_direct_IO+0x227/0x400
       generic_file_direct_write+0xcf/0x180
       btrfs_file_write_iter+0x308/0x58c
       aio_write+0xf8/0x1d0
       io_submit_one+0x3a9/0x620
       __ia32_compat_sys_io_submit+0xb2/0x270
       do_int80_syscall_32+0x5b/0x1a0
       entry_INT80_compat+0x88/0xa0

other info that might help us debug this:

Chain exists of:
  &mm->mmap_sem --> &ei->log_mutex --> &ei->dio_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&ei->dio_sem);
                               lock(&ei->log_mutex);
                               lock(&ei->dio_sem);
  lock(&mm->mmap_sem);

 *** DEADLOCK ***

1 lock held by aio-dio-invalid/30928:
 #0: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400

stack backtrace:
CPU: 0 PID: 30928 Comm: aio-dio-invalid Not tainted 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
 dump_stack+0x7c/0xbb
 print_circular_bug.isra.37+0x297/0x2a4
 check_prev_add.constprop.45+0x781/0x7a0
 ? __lock_acquire+0x42e/0x7a0
 validate_chain.isra.41+0x7f0/0xb00
 __lock_acquire+0x42e/0x7a0
 lock_acquire+0xbd/0x220
 ? get_user_pages_unlocked+0x5a/0x1e0
 down_read+0x48/0xb0
 ? get_user_pages_unlocked+0x5a/0x1e0
 get_user_pages_unlocked+0x5a/0x1e0
 get_user_pages_fast+0xa4/0x150
 iov_iter_get_pages+0xc3/0x340
 do_direct_IO+0xf93/0x1d70
 ? __alloc_workqueue_key+0x358/0x490
 ? __blockdev_direct_IO+0x14b/0x1c20
 __blockdev_direct_IO+0x32d/0x1c20
 ? btrfs_run_delalloc_work+0x40/0x40
 ? can_nocow_extent+0x490/0x490
 ? kvm_clock_read+0x1f/0x30
 ? can_nocow_extent+0x490/0x490
 ? btrfs_run_delalloc_work+0x40/0x40
 btrfs_direct_IO+0x227/0x400
 ? btrfs_run_delalloc_work+0x40/0x40
 generic_file_direct_write+0xcf/0x180
 btrfs_file_write_iter+0x308/0x58c
 aio_write+0xf8/0x1d0
 ? kvm_clock_read+0x1f/0x30
 ? __might_fault+0x3e/0x90
 io_submit_one+0x3a9/0x620
 ? io_submit_one+0xe5/0x620
 __ia32_compat_sys_io_submit+0xb2/0x270
 do_int80_syscall_32+0x5b/0x1a0
 entry_INT80_compat+0x88/0xa0

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't run delayed_iputs in commit

commit 30928e9baac238a7330085a1c5747f0b5df444b4 upstream.

This could result in a really bad case where we do something like

evict
  evict_refill_and_join
    btrfs_commit_transaction
      btrfs_run_delayed_iputs
        evict
          evict_refill_and_join
            btrfs_commit_transaction
... forever

We have plenty of other places where we run delayed iputs that are much
safer, let those do the work.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: only free reserved extent if we didn't insert it

commit 49940bdd57779c78462da7aa5a8650b2fea8c2ff upstream.

When we insert the file extent once the ordered extent completes we free
the reserved extent reservation as it'll have been migrated to the
bytes_used counter.  However if we error out after this step we'll still
clear the reserved extent reservation, resulting in a negative
accounting of the reserved bytes for the block group and space info.
Fix this by only doing the free if we didn't successfully insert a file
extent for this extent.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't use ctl->free_space for max_extent_size

commit fb5c39d7a887108087de6ff93d3f326b01b4ef41 upstream.

max_extent_size is supposed to be the largest contiguous range for the
space info, and ctl->free_space is the total free space in the block
group.  We need to keep track of these separately and _only_ use the
max_free_space if we don't have a max_extent_size, as that means our
original request was too large to search any of the block groups for and
therefore wouldn't have a max_extent_size set.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: set max_extent_size properly

commit ad22cf6ea47fa20fbe11ac324a0a15c0a9a4a2a9 upstream.

We can't use entry->bytes if our entry is a bitmap entry, we need to use
entry->max_extent_size in that case.  Fix up all the logic to make this
consistent.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix assertion on fsync of regular file when using no-holes feature

commit 7ed586d0a8241e81d58c656c5b315f781fa6fc97 upstream.

When using the NO_HOLES feature and logging a regular file, we were
expecting that if we find an inline extent, that either its size in RAM
(uncompressed and unenconded) matches the size of the file or if it does
not, that it matches the sector size and it represents compressed data.
This assertion does not cover a case where the length of the inline extent
is smaller than the sector size and also smaller the file's size, such
case is possible through fallocate. Example:

  $ mkfs.btrfs -f -O no-holes /dev/sdb
  $ mount /dev/sdb /mnt

  $ xfs_io -f -c "pwrite -S 0xb60 0 21" /mnt/foobar
  $ xfs_io -c "falloc 40 40" /mnt/foobar
  $ xfs_io -c "fsync" /mnt/foobar

In the above example we trigger the assertion because the inline extent's
length is 21 bytes while the file size is 80 bytes. The fallocate() call
merely updated the file's size and did not touch the existing inline
extent, as expected.

So fix this by adjusting the assertion so that an inline extent length
smaller than the file size is valid if the file size is smaller than the
filesystem's sector size.

A test case for fstests follows soon.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: a89ca6f24ffe ("Btrfs: fix fsync after truncate when no_holes feature is enabled")
CC: stable@vger.kernel.org # 4.14+
Link: https://lore.kernel.org/linux-btrfs/CAE5jQCfRSBC7n4pUTFJcmHh109=gwyT9mFkCOL+NKfzswmR=_Q@mail.gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix null pointer dereference on compressed write path error

commit 3527a018c00e5dbada2f9d7ed5576437b6dd5cfb upstream.

At inode.c:compress_file_range(), under the "free_pages_out" label, we can
end up dereferencing the "pages" pointer when it has a NULL value. This
case happens when "start" has a value of 0 and we fail to allocate memory
for the "pages" pointer. When that happens we jump to the "cont" label and
then enter the "if (start == 0)" branch where we immediately call the
cow_file_range_inline() function. If that function returns 0 (success
creating an inline extent) or an error (like -ENOMEM for example) we jump
to the "free_pages_out" label and then access "pages[i]" leading to a NULL
pointer dereference, since "nr_pages" has a value greater than zero at
that point.

Fix this by setting "nr_pages" to 0 when we fail to allocate memory for
the "pages" pointer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201119
Fixes: 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: qgroup: Dirty all qgroups before rescan

commit 9c7b0c2e8dbfbcd80a71e2cbfe02704f26c185c6 upstream.

[BUG]
In the following case, rescan won't zero out the number of qgroup 1/0:

  $ mkfs.btrfs -fq $DEV
  $ mount $DEV /mnt

  $ btrfs quota enable /mnt
  $ btrfs qgroup create 1/0 /mnt
  $ btrfs sub create /mnt/sub
  $ btrfs qgroup assign 0/257 1/0 /mnt

  $ dd if=/dev/urandom of=/mnt/sub/file bs=1k count=1000
  $ btrfs sub snap /mnt/sub /mnt/snap
  $ btrfs quota rescan -w /mnt
  $ btrfs qgroup show -pcre /mnt
  qgroupid         rfer         excl     max_rfer     max_excl parent  child
  --------         ----         ----     --------     -------- ------  -----
  0/5          16.00KiB     16.00KiB         none         none ---     ---
  0/257      1016.00KiB     16.00KiB         none         none 1/0     ---
  0/258      1016.00KiB     16.00KiB         none         none ---     ---
  1/0        1016.00KiB     16.00KiB         none         none ---     0/257

So far so good, but:

  $ btrfs qgroup remove 0/257 1/0 /mnt
  WARNING: quotas may be inconsistent, rescan needed
  $ btrfs quota rescan -w /mnt
  $ btrfs qgroup show -pcre  /mnt
  qgoupid         rfer         excl     max_rfer     max_excl parent  child
  --------         ----         ----     --------     -------- ------  -----
  0/5          16.00KiB     16.00KiB         none         none ---     ---
  0/257      1016.00KiB     16.00KiB         none         none ---     ---
  0/258      1016.00KiB     16.00KiB         none         none ---     ---
  1/0        1016.00KiB     16.00KiB         none         none ---     ---
     ^^^^^^^^^^     ^^^^^^^^ not cleared

[CAUSE]
Before rescan we call qgroup_rescan_zero_tracking() to zero out all
qgroups' accounting numbers.

However we don't mark all qgroups dirty, but rely on rescan to do so.

If we have any high level qgroup without children, it won't be marked
dirty during rescan, since we cannot reach that qgroup.

This will cause QGROUP_INFO items of childless qgroups never get updated
in the quota tree, thus their numbers will stay the same in "btrfs
qgroup show" output.

[FIX]
Just mark all qgroups dirty in qgroup_rescan_zero_tracking(), so even if
we have childless qgroups, their QGROUP_INFO items will still get
updated during rescan.

Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Tested-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix wrong dentries after fsync of file that got its parent replaced

commit 0f375eed92b5a407657532637ed9652611a682f5 upstream.

In a scenario like the following:

  mkdir /mnt/A               # inode 258
  mkdir /mnt/B               # inode 259
  touch /mnt/B/bar           # inode 260

  sync

  mv /mnt/B/bar /mnt/A/bar
  mv -T /mnt/A /mnt/B
  fsync /mnt/B/bar

  <power fail>

After replaying the log we end up with file bar having 2 hard links, both
with the name 'bar' and one in the directory with inode number 258 and the
other in the directory with inode number 259. Also, we end up with the
directory inode 259 still existing and with the directory inode 258 still
named as 'A', instead of 'B'. In this scenario, file 'bar' should only
have one hard link, located at directory inode 258, the directory inode
259 should not exist anymore and the name for directory inode 258 should
be 'B'.

This incorrect behaviour happens because when attempting to log the old
parents of an inode, we skip any parents that no longer exist. Fix this
by forcing a full commit if an old parent no longer exists.

A test case for fstests follows soon.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix warning when replaying log after fsync of a tmpfile

commit f2d72f42d5fa3bf33761d9e47201745f624fcff5 upstream.

When replaying a log which contains a tmpfile (which necessarily has a
link count of 0) we end up calling inc_nlink(), at
fs/btrfs/tree-log.c:replay_one_buffer(), which produces a warning like
the following:

  [195191.943673] WARNING: CPU: 0 PID: 6924 at fs/inode.c:342 inc_nlink+0x33/0x40
  [195191.943723] CPU: 0 PID: 6924 Comm: mount Not tainted 4.19.0-rc6-btrfs-next-38 #1
  [195191.943724] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
  [195191.943726] RIP: 0010:inc_nlink+0x33/0x40
  [195191.943728] RSP: 0018:ffffb96e425e3870 EFLAGS: 00010246
  [195191.943730] RAX: 0000000000000000 RBX: ffff8c0d1e6af4f0 RCX: 0000000000000006
  [195191.943731] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8c0d1e6af4f0
  [195191.943731] RBP: 0000000000000097 R08: 0000000000000001 R09: 0000000000000000
  [195191.943732] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb96e425e3a60
  [195191.943733] R13: ffff8c0d10cff0c8 R14: ffff8c0d0d515348 R15: ffff8c0d78a1b3f8
  [195191.943735] FS:  00007f570ee24480(0000) GS:ffff8c0dfb200000(0000) knlGS:0000000000000000
  [195191.943736] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [195191.943737] CR2: 00005593286277c8 CR3: 00000000bb8f2006 CR4: 00000000003606f0
  [195191.943739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [195191.943740] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [195191.943741] Call Trace:
  [195191.943778]  replay_one_buffer+0x797/0x7d0 [btrfs]
  [195191.943802]  walk_up_log_tree+0x1c1/0x250 [btrfs]
  [195191.943809]  ? rcu_read_lock_sched_held+0x3f/0x70
  [195191.943825]  walk_log_tree+0xae/0x1d0 [btrfs]
  [195191.943840]  btrfs_recover_log_trees+0x1d7/0x4d0 [btrfs]
  [195191.943856]  ? replay_dir_deletes+0x280/0x280 [btrfs]
  [195191.943870]  open_ctree+0x1c3b/0x22a0 [btrfs]
  [195191.943887]  btrfs_mount_root+0x6b4/0x800 [btrfs]
  [195191.943894]  ? rcu_read_lock_sched_held+0x3f/0x70
  [195191.943899]  ? pcpu_alloc+0x55b/0x7c0
  [195191.943906]  ? mount_fs+0x3b/0x140
  [195191.943908]  mount_fs+0x3b/0x140
  [195191.943912]  ? __init_waitqueue_head+0x36/0x50
  [195191.943916]  vfs_kern_mount+0x62/0x160
  [195191.943927]  btrfs_mount+0x134/0x890 [btrfs]
  [195191.943936]  ? rcu_read_lock_sched_held+0x3f/0x70
  [195191.943938]  ? pcpu_alloc+0x55b/0x7c0
  [195191.943943]  ? mount_fs+0x3b/0x140
  [195191.943952]  ? btrfs_remount+0x570/0x570 [btrfs]
  [195191.943954]  mount_fs+0x3b/0x140
  [195191.943956]  ? __init_waitqueue_head+0x36/0x50
  [195191.943960]  vfs_kern_mount+0x62/0x160
  [195191.943963]  do_mount+0x1f9/0xd40
  [195191.943967]  ? memdup_user+0x4b/0x70
  [195191.943971]  ksys_mount+0x7e/0xd0
  [195191.943974]  __x64_sys_mount+0x21/0x30
  [195191.943977]  do_syscall_64+0x60/0x1b0
  [195191.943980]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [195191.943983] RIP: 0033:0x7f570e4e524a
  [195191.943986] RSP: 002b:00007ffd83589478 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
  [195191.943989] RAX: ffffffffffffffda RBX: 0000563f335b2060 RCX: 00007f570e4e524a
  [195191.943990] RDX: 0000563f335b2240 RSI: 0000563f335b2280 RDI: 0000563f335b2260
  [195191.943992] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000020
  [195191.943993] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000563f335b2260
  [195191.943994] R13: 0000563f335b2240 R14: 0000000000000000 R15: 00000000ffffffff
  [195191.944002] irq event stamp: 8688
  [195191.944010] hardirqs last  enabled at (8687): [<ffffffff9cb004c3>] console_unlock+0x503/0x640
  [195191.944012] hardirqs last disabled at (8688): [<ffffffff9ca037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
  [195191.944018] softirqs last  enabled at (8638): [<ffffffff9cc0a5d1>] __set_page_dirty_nobuffers+0x101/0x150
  [195191.944020] softirqs last disabled at (8634): [<ffffffff9cc26bbe>] wb_wakeup_delayed+0x2e/0x60
  [195191.944022] ---[ end trace 5d6e873a9a0b811a ]---

This happens because the inode does not have the flag I_LINKABLE set,
which is a runtime only flag, not meant to be persisted, set when the
inode is created through open(2) if the flag O_EXCL is not passed to it.
Except for the warning, there are no other consequences (like corruptions
or metadata inconsistencies).

Since it's pointless to replay a tmpfile as it would be deleted in a
later phase of the log replay procedure (it has a link count of 0), fix
this by not logging tmpfiles and if a tmpfile is found in a log (created
by a kernel without this change), skip the replay of the inode.

A test case for fstests follows soon.

Fixes: 471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay")
CC: stable@vger.kernel.org # 4.18+
Reported-by: Martin Steigerwald <martin@lichtvoll.de>
Link: https://lore.kernel.org/linux-btrfs/3666619.NTnn27ZJZE@merkaba/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: make sure we create all new block groups

commit 545e3366db823dc3342ca9d7fea803f829c9062f upstream.

Allocating new chunks modifies both the extent and chunk tree, which can
trigger new chunk allocations.  So instead of doing list_for_each_safe,
just do while (!list_empty()) so we make sure we don't exit with other
pending bg's still on our list.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: reset max_extent_size on clear in a bitmap

commit 553cceb49681d60975d00892877d4c871bf220f9 upstream.

We need to clear the max_extent_size when we clear bits from a bitmap
since it could have been from the range that contains the
max_extent_size.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: protect space cache inode alloc with GFP_NOFS

commit 84de76a2fb217dc1b6bc2965cc397d1648aa1404 upstream.

If we're allocating a new space cache inode it's likely going to be
under a transaction handle, so we need to use memalloc_nofs_save() in
order to avoid deadlocks, and more importantly lockdep messages that
make xfstests fail.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: wait on caching when putting the bg cache

commit 3aa7c7a31c26321696b92841d5103461c6f3f517 upstream.

While testing my backport I noticed there was a panic if I ran
generic/416 generic/417 generic/418 all in a row.  This just happened to
uncover a race where we had outstanding IO after we destroy all of our
workqueues, and then we'd go to queue the endio work on those free'd
workqueues.

This is because we aren't waiting for the caching threads to be done
before freeing everything up, so to fix this make sure we wait on any
outstanding caching that's being done before we free up the block group,
so we're sure to be done with all IO by the time we get to
btrfs_stop_all_workers().  This fixes the panic I was seeing
consistently in testing.

------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:6112!
SMP PTI
Modules linked in:
CPU: 1 PID: 27165 Comm: kworker/u4:7 Not tainted 4.16.0-02155-g3553e54a578d-dirty #875
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: btrfs-cache btrfs_cache_helper
RIP: 0010:btrfs_map_bio+0x346/0x370
RSP: 0000:ffffc900061e79d0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff880071542e00 RCX: 0000000000533000
RDX: ffff88006bb74380 RSI: 0000000000000008 RDI: ffff880078160000
RBP: 0000000000000001 R08: ffff8800781cd200 R09: 0000000000503000
R10: ffff88006cd21200 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8800781cd200 R15: ffff880071542e00
FS:  0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000817ffc4 CR3: 0000000078314000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 btree_submit_bio_hook+0x8a/0xd0
 submit_one_bio+0x5d/0x80
 read_extent_buffer_pages+0x18a/0x320
 btree_read_extent_buffer_pages+0xbc/0x200
 ? alloc_extent_buffer+0x359/0x3e0
 read_tree_block+0x3d/0x60
 read_block_for_search.isra.30+0x1a5/0x360
 btrfs_search_slot+0x41b/0xa10
 btrfs_next_old_leaf+0x212/0x470
 caching_thread+0x323/0x490
 normal_work_helper+0xc5/0x310
 process_one_work+0x141/0x340
 worker_thread+0x44/0x3c0
 kthread+0xf8/0x130
 ? process_one_work+0x340/0x340
 ? kthread_bind+0x10/0x10
 ret_from_fork+0x35/0x40
RIP: btrfs_map_bio+0x346/0x370 RSP: ffffc900061e79d0
---[ end trace 827eb13e50846033 ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't attempt to trim devices that don't support it

commit 0be88e367fd8fbdb45257615d691f4675dda062f upstream.

We check whether any device the file system is using supports discard in
the ioctl call, but then we attempt to trim free extents on every device
regardless of whether discard is supported.  Due to the way we mask off
EOPNOTSUPP, we can end up issuing the trim operations on each free range
on devices that don't support it, just wasting time.

Fixes: 499f377f49f08 ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: iterate all devices during trim, instead of fs_devices::alloc_list

commit d4e329de5e5e21594df2e0dd59da9acee71f133b upstream.

btrfs_trim_fs iterates over the fs_devices->alloc_list while holding the
device_list_mutex.  The problem is that ->alloc_list is protected by the
chunk mutex.  We don't want to hold the chunk mutex over the trim of the
entire file system.  Fortunately, the ->dev_list list is protected by
the dev_list mutex and while it will give us all devices, including
read-only devices, we already just skip the read-only devices.  Then we
can continue to take and release the chunk mutex while scanning each
device.

Fixes: 499f377f49f ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Ensure btrfs_trim_fs can trim the whole filesystem

commit 6ba9fc8e628becf0e3ec94083450d089b0dec5f5 upstream.

[BUG]
fstrim on some btrfs only trims the unallocated space, not trimming any
space in existing block groups.

[CAUSE]
Before fstrim_range passed to btrfs_trim_fs(), it gets truncated to
range [0, super->total_bytes).  So later btrfs_trim_fs() will only be
able to trim block groups in range [0, super->total_bytes).

While for btrfs, any bytenr aligned to sectorsize is valid, since btrfs
uses its logical address space, there is nothing limiting the location
where we put block groups.

For filesystem with frequent balance, it's quite easy to relocate all
block groups and bytenr of block groups will start beyond
super->total_bytes.

In that case, btrfs will not trim existing block groups.

[FIX]
Just remove the truncation in btrfs_ioctl_fitrim(), so btrfs_trim_fs()
can get the unmodified range, which is normally set to [0, U64_MAX].

Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: f4c697e6406d ("btrfs: return EINVAL if start > total_bytes in fitrim ioctl")
CC: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Enhance btrfs_trim_fs function to handle error better

commit 93bba24d4b5ad1e5cd8b43f64e66ff9d6355dd20 upstream.

Function btrfs_trim_fs() doesn't handle errors in a consistent way. If
error happens when trimming existing block groups, it will skip the
remaining blocks and continue to trim unallocated space for each device.

The return value will only reflect the final error from device trimming.

This patch will fix such behavior by:

1) Recording the last error from block group or device trimming
   The return value will also reflect the last error during trimming.
   Make developer more aware of the problem.

2) Continuing trimming if possible
   If we failed to trim one block group or device, we could still try
   the next block group or device.

3) Report number of failures during block group and device trimming
   It would be less noisy, but still gives user a brief summary of
   what's going wrong.

Such behavior can avoid confusion for cases like failure to trim the
first block group and then only unallocated space is trimmed.

Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add bg_ret and dev_ret to the messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix error handling in free_log_tree

commit 374b0e2d6ba5da7fd1cadb3247731ff27d011f6f upstream.

When we hit an I/O error in free_log_tree->walk_log_tree during file system
shutdown we can crash due to there not being a valid transaction handle.

Use btrfs_handle_fs_error when there's no transaction handle to use.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
  IP: free_log_tree+0xd2/0x140 [btrfs]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  Modules linked in: <modules>
  CPU: 2 PID: 23544 Comm: umount Tainted: G        W        4.12.14-kvmsmall #9 SLE15 (unreleased)
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  task: ffff96bfd3478880 task.stack: ffffa7cf40d78000
  RIP: 0010:free_log_tree+0xd2/0x140 [btrfs]
  RSP: 0018:ffffa7cf40d7bd10 EFLAGS: 00010282
  RAX: 00000000fffffffb RBX: 00000000fffffffb RCX: 0000000000000002
  RDX: 0000000000000000 RSI: ffff96c02f07d4c8 RDI: 0000000000000282
  RBP: ffff96c013cf1000 R08: ffff96c02f07d4c8 R09: ffff96c02f07d4d0
  R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000
  R13: ffff96c005e800c0 R14: ffffa7cf40d7bdb8 R15: 0000000000000000
  FS:  00007f17856bcfc0(0000) GS:ffff96c03f600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000060 CR3: 0000000045ed6002 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ? wait_for_writer+0xb0/0xb0 [btrfs]
   btrfs_free_log+0x17/0x30 [btrfs]
   btrfs_drop_and_free_fs_root+0x9a/0xe0 [btrfs]
   btrfs_free_fs_roots+0xc0/0x130 [btrfs]
   ? wait_for_completion+0xf2/0x100
   close_ctree+0xea/0x2e0 [btrfs]
   ? kthread_stop+0x161/0x260
   generic_shutdown_super+0x6c/0x120
   kill_anon_super+0xe/0x20
   btrfs_kill_super+0x13/0x100 [btrfs]
   deactivate_locked_super+0x3f/0x70
   cleanup_mnt+0x3b/0x70
   task_work_run+0x78/0x90
   exit_to_usermode_loop+0x77/0xa6
   do_syscall_64+0x1c5/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7
  RIP: 0033:0x7f1784f90827
  RSP: 002b:00007ffdeeb03118 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 0000556a60c62970 RCX: 00007f1784f90827
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556a60c62b50
  RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff
  R10: 0000556a60c63900 R11: 0000000000000246 R12: 0000556a60c62b50
  R13: 00007f17854a81c4 R14: 0000000000000000 R15: 0000000000000000
  RIP: free_log_tree+0xd2/0x140 [btrfs] RSP: ffffa7cf40d7bd10
  CR2: 0000000000000060

Fixes: 681ae50917df9 ("Btrfs: cleanup reserved space when freeing tree log on error")
CC: <stable@vger.kernel.org> # v3.13
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: locking: Add extra check in btrfs_init_new_buffer() to avoid deadlock

commit b72c3aba09a53fc7c1824250d71180ca154517a7 upstream.

[BUG]
For certain crafted image, whose csum root leaf has missing backref, if
we try to trigger write with data csum, it could cause deadlock with the
following kernel WARN_ON():

  WARNING: CPU: 1 PID: 41 at fs/btrfs/locking.c:230 btrfs_tree_lock+0x3e2/0x400
  CPU: 1 PID: 41 Comm: kworker/u4:1 Not tainted 4.18.0-rc1+ #8
  Workqueue: btrfs-endio-write btrfs_endio_write_helper
  RIP: 0010:btrfs_tree_lock+0x3e2/0x400
  Call Trace:
   btrfs_alloc_tree_block+0x39f/0x770
   __btrfs_cow_block+0x285/0x9e0
   btrfs_cow_block+0x191/0x2e0
   btrfs_search_slot+0x492/0x1160
   btrfs_lookup_csum+0xec/0x280
   btrfs_csum_file_blocks+0x2be/0xa60
   add_pending_csums+0xaf/0xf0
   btrfs_finish_ordered_io+0x74b/0xc90
   finish_ordered_fn+0x15/0x20
   normal_work_helper+0xf6/0x500
   btrfs_endio_write_helper+0x12/0x20
   process_one_work+0x302/0x770
   worker_thread+0x81/0x6d0
   kthread+0x180/0x1d0
   ret_from_fork+0x35/0x40

[CAUSE]
That crafted image has missing backref for csum tree root leaf.  And
when we try to allocate new tree block, since there is no
EXTENT/METADATA_ITEM for csum tree root, btrfs consider it's free slot
and use it.

The extent tree of the image looks like:

  Normal image                      |       This fuzzed image
  ----------------------------------+--------------------------------
  BG 29360128                       | BG 29360128
   One empty slot                   |  One empty slot
  29364224: backref to UUID tree    | 29364224: backref to UUID tree
   Two empty slots                  |  Two empty slots
  29376512: backref to CSUM tree    |  One empty slot (bad type) <<<
  29380608: backref to D_RELOC tree | 29380608: backref to D_RELOC tree
  ...                               | ...

Since bytenr 29376512 has no METADATA/EXTENT_ITEM, when btrfs try to
alloc tree block, it's an valid slot for btrfs.

And for finish_ordered_write, when we need to insert csum, we try to CoW
csum tree root.

By accident, empty slots at bytenr BG_OFFSET, BG_OFFSET + 8K,
BG_OFFSET + 12K is already used by tree block COW for other trees, the
next empty slot is BG_OFFSET + 16K, which should be the backref for CSUM
tree.

But due to the bad type, btrfs can recognize it and still consider it as
an empty slot, and will try to use it for csum tree CoW.

Then in the following call trace, we will try to lock the new tree
block, which turns out to be the old csum tree root which is already
locked:

btrfs_search_slot() called on csum tree root, which is at 29376512
|- btrfs_cow_block()
   |- btrfs_set_lock_block()
   |  |- Now locks tree block 29376512 (old csum tree root)
   |- __btrfs_cow_block()
      |- btrfs_alloc_tree_block()
         |- btrfs_reserve_extent()
            | Now it returns tree block 29376512, which extent tree
            | shows its empty slot, but it's already hold by csum tree
            |- btrfs_init_new_buffer()
               |- btrfs_tree_lock()
                  | Triggers WARN_ON(eb->lock_owner == current->pid)
                  |- wait_event()
                     Wait lock owner to release the lock, but it's
                     locked by ourself, so it will deadlock

[FIX]
This patch will do the lock_owner and current->pid check at
btrfs_init_new_buffer().
So above deadlock can be avoided.

Since such problem can only happen in crafted image, we will still
trigger kernel warning for later aborted transaction, but with a little
more meaningful warning message.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200405
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Handle owner mismatch gracefully when walking up tree

commit 65c6e82becec33731f48786e5a30f98662c86b16 upstream.

[BUG]
When mounting certain crafted image, btrfs will trigger kernel BUG_ON()
when trying to recover balance:

  kernel BUG at fs/btrfs/extent-tree.c:8956!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 1 PID: 662 Comm: mount Not tainted 4.18.0-rc1-custom+ #10
  RIP: 0010:walk_up_proc+0x336/0x480 [btrfs]
  RSP: 0018:ffffb53540c9b890 EFLAGS: 00010202
  Call Trace:
   walk_up_tree+0x172/0x1f0 [btrfs]
   btrfs_drop_snapshot+0x3a4/0x830 [btrfs]
   merge_reloc_roots+0xe1/0x1d0 [btrfs]
   btrfs_recover_relocation+0x3ea/0x420 [btrfs]
   open_ctree+0x1af3/0x1dd0 [btrfs]
   btrfs_mount_root+0x66b/0x740 [btrfs]
   mount_fs+0x3b/0x16a
   vfs_kern_mount.part.9+0x54/0x140
   btrfs_mount+0x16d/0x890 [btrfs]
   mount_fs+0x3b/0x16a
   vfs_kern_mount.part.9+0x54/0x140
   do_mount+0x1fd/0xda0
   ksys_mount+0xba/0xd0
   __x64_sys_mount+0x21/0x30
   do_syscall_64+0x60/0x210
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

[CAUSE]
Extent tree corruption.  In this particular case, reloc tree root's
owner is DATA_RELOC_TREE (should be TREE_RELOC), thus its backref is
corrupted and we failed the owner check in walk_up_tree().

[FIX]
It's pretty hard to take care of every extent tree corruption, but at
least we can remove such BUG_ON() and exit more gracefully.

And since in this particular image, DATA_RELOC_TREE and TREE_RELOC share
the same root (which is obviously invalid), we needs to make
__del_reloc_root() more robust to detect such invalid sharing to avoid
possible NULL dereference as root->node can be NULL in this case.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200411
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: qgroup: Avoid calling qgroup functions if qgroup is not enabled

commit 3628b4ca64f24a4ec55055597d0cb1c814729f8b upstream.

Some qgroup trace events like btrfs_qgroup_release_data() and
btrfs_qgroup_free_delayed_ref() can still be triggered even if qgroup is
not enabled.

This is caused by the lack of qgroup status check before calling some
qgroup functions.  Thankfully the functions can handle quota disabled
case well and just do nothing for qgroup disabled case.

This patch will do earlier check before triggering related trace events.

And for enabled <-> disabled race case:

1) For enabled->disabled case
   Disable will wipe out all qgroups data including reservation and
   excl/rfer. Even if we leak some reservation or numbers, it will
   still be cleared, so nothing will go wrong.

2) For disabled -> enabled case
   Current btrfs_qgroup_release_data() will use extent_io tree to ensure
   we won't underflow reservation. And for delayed_ref we use
   head->qgroup_reserved to record the reserved space, so in that case
   head->qgroup_reserved should be 0 and we won't underflow.

CC: stable@vger.kernel.org # 4.14+
Reported-by: Chris Murphy <lists@colorremedies.com>
Link: https://lore.kernel.org/linux-btrfs/CAJCQCtQau7DtuUUeycCkZ36qjbKuxNzsgqJ7+sJ6W0dK_NLE3w@mail.gmail.com/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/powerpc: Fix ptrace tm failure

commit 48dc0ef19044bfb69193302fbe3a834e3331b7ae upstream.

Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation
fault that happens on the child process prior to setting cptr[2] = 1. This
causes the parent process to wait forever at 'while (!pptr[2])' and the test to
be killed by the test harness framework by timeout, thus, failing.

The segmentation fault happens because of a inline assembly being
generated as:

0x10000355c <tm_spd_gpr+492>    lfs    f0, 0(0)

This is reading memory position 0x0 and causing the segmentation fault.

This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where
flt_4 is passed to the inline assembly block as:

[flt_4] "r" (&d)

Since the inline assembly 'r' constraint means any GPR, gpr0 is being
chosen, thus causing this issue when issuing a Load Floating-Point Single
instruction.

This patch simply changes the constraint to 'b', which specify that this
register will be used as base, and r0 is not allowed to be used, avoiding
this issue.

Other than that, removing flt_2 register from the input operands, since it
is not used by the inline assembly code at all.

Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc/tegra: pmc: Fix child-node lookup

commit 1dc6bd5e39a29453bdcc17348dd2a89f1aa4004e upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent pmc node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.

Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC")
Cc: stable <stable@vger.kernel.org> # 4.0
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: stratix10: Correct System Manager register size

commit 74121b9aa3cd571ddfff014a9f47db36cae3cda9 upstream.

Correct the register size of the System Manager node.

Cc: stable@vger.kernel.org
Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi")
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: socfpga: Fix SDRAM node address for Arria10

commit ce3bf934f919a7d675c5b7fa4cc233ded9c6256e upstream.

The address in the SDRAM node was incorrect. Fix this to agree with the
correct address and to match the reg definition block.

Cc: stable@vger.kernel.org
Fixes: 54b4a8f57848b("arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support")
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cramfs: fix abad comparison when wrap-arounds occur

commit 672ca9dd13f1aca0c17516f76fc5b0e8344b3e46 upstream.

It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rpmsg: smd: fix memory leak on channel create

commit 940c620d6af8fca7d115de40f19870fba415efac upstream.

Currently a failed allocation of channel->name leads to an
immediate return without freeing channel. Fix this by setting
ret to -ENOMEM and jumping to an exit path that kfree's channel.

Detected by CoverityScan, CID#1473692 ("Resource Leak")

Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: lse: remove -fcall-used-x0 flag

commit 2a6c7c367de82951c98a290a21156770f6f82c84 upstream.

x0 is not callee-saved in the PCS. So there is no need to specify
-fcall-used-x0.

Clang doesn't currently support -fcall-used flags. This patch will help
building the kernel with clang.

Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Tri Vo <trong@android.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: media colorspaces*.rst: rename AdobeRGB to opRGB

commit a58c37978cf02f6d35d05ee4e9288cb8455f1401 upstream.

Drop all Adobe references and use the official opRGB standard
instead.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: make v4l2-compliance happier by starting sequence on zero

commit afeaade90db4c5dab93f326d9582be1d5954a198 upstream.

The v4l2-compliance tool complains if a video doesn't start
with a zero sequence number.

While this shouldn't cause any real problem for apps, let's
make it happier, in order to better check the v4l2-compliance
differences before and after patchsets.

This is actually an old issue. It is there since at least its
videobuf2 conversion, e. g. changeset 3829fadc461 ("[media]
em28xx: convert to videobuf2"), if VB1 wouldn't suffer from
the same issue.

Cc: stable@vger.kernel.org
Fixes: d3829fadc461 ("[media] em28xx: convert to videobuf2")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: fix input name for Terratec AV 350

commit 15644bfa195bd166d0a5ed76ae2d587f719c3dac upstream.

Instead of using a register value, use an AMUX name, as otherwise
VIDIOC_G_AUDIO would fail.

Cc: stable@vger.kernel.org
Fixes: 766ed64de554 ("V4L/DVB (11827): Add support for Terratec Grabster AV350")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: tvp5150: avoid going past array on v4l2_querymenu()

commit 5c4c4505b716cb782ad7263091edc466c4d1fbd4 upstream.

The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of
the number of possible values, it requires the number of the maximum
value. In other words, the ARRAY_SIZE() value should be decremented,
otherwise it will go past the array bounds, as warned by KASAN:

[  279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676

[  279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120
[  279.839741] Hardware name:  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
[  279.839743] Call Trace:
[  279.839758]  dump_stack+0x71/0xab
[  279.839807]  ? v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839817]  print_address_description+0x1c9/0x270
[  279.839863]  ? v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839871]  kasan_report+0x237/0x360
[  279.839918]  v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839964]  __video_do_ioctl+0x2c8/0x590 [videodev]
[  279.840011]  ? copy_overflow+0x20/0x20 [videodev]
[  279.840020]  ? avc_ss_reset+0xa0/0xa0
[  279.840028]  ? check_stack_object+0x21/0x60
[  279.840036]  ? __check_object_size+0xe7/0x240
[  279.840080]  video_usercopy+0xed/0x730 [videodev]
[  279.840123]  ? copy_overflow+0x20/0x20 [videodev]
[  279.840167]  ? v4l_enumstd+0x40/0x40 [videodev]
[  279.840177]  ? __handle_mm_fault+0x9f9/0x1ba0
[  279.840186]  ? __pmd_alloc+0x2c0/0x2c0
[  279.840193]  ? __vfs_write+0xb6/0x350
[  279.840200]  ? kernel_read+0xa0/0xa0
[  279.840244]  ? video_usercopy+0x730/0x730 [videodev]
[  279.840284]  v4l2_ioctl+0xa1/0xb0 [videodev]
[  279.840295]  do_vfs_ioctl+0x117/0x8a0
[  279.840303]  ? selinux_file_ioctl+0x211/0x2f0
[  279.840313]  ? ioctl_preallocate+0x120/0x120
[  279.840319]  ? selinux_capable+0x20/0x20
[  279.840332]  ksys_ioctl+0x70/0x80
[  279.840342]  __x64_sys_ioctl+0x3d/0x50
[  279.840351]  do_syscall_64+0x6d/0x1c0
[  279.840361]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  279.840367] RIP: 0033:0x7fdfb46275d7
[  279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48
[  279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7
[  279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003
[  279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902
[  279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0
[  279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000

[  279.840515] The buggy address belongs to the variable:
[  279.840535]  tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150]

Fixes: c43875f66140 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: use a default format if TRY_FMT fails

commit f823ce2a1202d47110a7ef86b65839f0be8adc38 upstream.

Follow the V4L2 spec, as warned by v4l2-compliance:

warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see:

warn: v4l2-test-formats.cpp(734): http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html

Cc: stable@vger.kernel.org
Fixes: bddcf63313c6 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: fix kernel panic with negotiate_mq error path

commit 6cc4a0863c9709c512280c64e698d68443ac8053 upstream.

info->nr_rings isn't adjusted in case of ENOMEM error from
negotiate_mq(). This leads to kernel panic in error path.

Typical call stack involving panic -
 #8 page_fault at ffffffff8175936f
    [exception RIP: blkif_free_ring+33]
    RIP: ffffffffa0149491  RSP: ffff8804f7673c08  RFLAGS: 00010292
 ...
 #9 blkif_free at ffffffffa0149aaa [xen_blkfront]
 #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront]
 #11 blkback_changed at ffffffffa014ea8b [xen_blkfront]
 #12 xenbus_otherend_changed at ffffffff81424670
 #13 backend_changed at ffffffff81426dc3
 #14 xenwatch_thread at ffffffff81422f29
 #15 kthread at ffffffff810abe6a
 #16 ret_from_fork at ffffffff81754078

Cc: stable@vger.kernel.org
Fixes: 7ed8ce1c5fc7 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs")
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix xen_qlock_wait()

commit d3132b3860f6cf35ff7609a76bbcdbb814bd027c upstream.

Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable")
introduced a regression for Xen guests running fully virtualized
(HVM or PVH mode). The Xen hypervisor wouldn't return from the poll
hypercall with interrupts disabled in case of an interrupt (for PV
guests it does).

So instead of disabling interrupts in xen_qlock_wait() use a nesting
counter to avoid calling xen_clear_irq_pending() in case
xen_qlock_wait() is nested.

Fixes: a856531951dc80 ("xen: make xen_qlock_wait() nestable")
Cc: stable@vger.kernel.org
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Passing ekgdboc to command line causes panic

commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.

kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[    0.000000] RIP: 0010:strlen+0x0/0x20
...
[    0.000000] Call Trace
[    0.000000]  ? kgdboc_option_setup+0x9/0xa0
[    0.000000]  ? kgdboc_early_init+0x6/0x1b
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds a check to prevent the panic.

Cc: stable@vger.kernel.org
Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD

commit 250854eed5d45a73d81e4137dfd85180af6f2ec3 upstream.

When the OSD is on (i.e. vivid displays text on top of the test pattern), and
you enable hflip, then the driver crashes.

The cause turned out to be a division of a negative number by an unsigned value.
You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-(

Fixes: 3e14e7a82c1ef ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: <stable@vger.kernel.org> # for v4.1 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TC: Set DMA masks for devices

commit 3f2aa244ee1a0d17ed5b6c86564d2c1b24d1c96b upstream.

Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:

defxx: v1.11 2014/07/01  Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
        0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
        0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
        98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
        0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
        9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
        ...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---

This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.

Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1].  The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.

This removes the warning shown above.

References:

[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
    Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Ensure that page-table updates are visible before TLBI

commit 7d321bd3542500caf125249f44dc37cb4e738013 upstream.

The IO-pgtable code relies on the driver TLB invalidation callbacks to
ensure that all page-table updates are visible to the IOMMU page-table
walker.

In the case that the page-table walker is cache-coherent, we cannot rely
on an implicit DSB from the DMA-mapping code, so we must ensure that we
execute a DSB in our tlb_add_flush() callback prior to triggering the
invalidation.

Cc: <stable@vger.kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 2df7a25ce4a7 ("iommu/arm-smmu: Clean up DMA API usage")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: OCTEON: fix out of bounds array access on CN68XX

commit c0fae7e2452b90c31edd2d25eb3baf0c76b400ca upstream.

The maximum number of interfaces is returned by
cvmx_helper_get_number_of_interfaces(), and the value is used to access
interface_port_count[]. When CN68XX support was added, we forgot
to increase the array size. Fix that.

Fixes: 2c8c3f0201333 ("MIPS: Octeon: Support additional interfaces on CN68XX")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20949/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/msi: Fix compile error on mpc83xx

commit 0f99153def98134403c9149128e59d3e1786cf04 upstream.

mpic_get_primary_version() is not defined when not using MPIC.
The compile error log like:

arch/powerpc/sysdev/built-in.o: In function `fsl_of_msi_probe':
fsl_msi.c:(.text+0x150c): undefined reference to `fsl_mpic_primary_get_version'

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Fixes: 807d38b73b6 ("powerpc/mpic: Add get_version API both for internal and external use")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: fix various dmz_get_mblock() issues

commit 3d4e738311327bc4ba1d55fbe2f1da3de4a475f9 upstream.

dmz_fetch_mblock() called from dmz_get_mblock() has a race since the
allocation of the new metadata block descriptor and its insertion in
the cache rbtree with the READING state is not atomic. Two different
contexts requesting the same block may end up each adding two different
descriptors of the same block to the cache.

Another problem for this function is that the BIO for processing the
block read is allocated after the metadata block descriptor is inserted
in the cache rbtree. If the BIO allocation fails, the metadata block
descriptor is freed without first being removed from the rbtree.

Fix the first problem by checking again if the requested block is not in
the cache right before inserting the newly allocated descriptor,
atomically under the mblk_lock spinlock. The second problem is fixed by
simply allocating the BIO before inserting the new block in the cache.

Finally, since dmz_fetch_mblock() also increments a block reference
counter, rename the function to dmz_get_mblock_slow(). To be symmetric
and clear, also rename dmz_lookup_mblock() to dmz_get_mblock_fast() and
increment the block reference counter directly in that function rather
than in dmz_get_mblock().

Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: fix metadata block ref counting

commit 33c2865f8d011a2ca9f67124ddab9dc89382e9f1 upstream.

Since the ref field of struct dmz_mblock is always used with the
spinlock of struct dmz_metadata locked, there is no need to use an
atomic_t type. Change the type of the ref field to an unsigne
integer.

Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>