Merge 4.14.211 into android-4.14-q

Changes in 4.14.211
net/af_iucv: set correct sk_protocol for child sockets
rose: Fix Null pointer dereference in rose_send_frame()
sock: set sk_err to ee_errno on dequeue from errq
tcp: Set INET_ECN_xmit configuration in tcp_reinit_congestion_control
tun: honor IOCB_NOWAIT flag
usbnet: ipheth: fix connectivity with iOS 14
bonding: wait for sysfs kobject destruction before freeing struct slave
netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversal
ipv4: Fix tos mask in inet_rtm_getroute()
ibmvnic: Ensure that SCRQ entry reads are correctly ordered
ibmvnic: Fix TX completion error handling
net/x25: prevent a couple of overflows
cxgb3: fix error return code in t3_sge_alloc_qset()
net: pasemi: fix error return code in pasemi_mac_open()
net/mlx5: Fix wrong address reclaim when command interface is down
dt-bindings: net: correct interrupt flags in examples
ALSA: usb-audio: US16x08: fix value count for level meters
Input: xpad - support Ardwiino Controllers
Input: i8042 - add ByteSpeed touchpad to noloop table
RDMA/i40iw: Address an mmap handler exploit in i40iw
Linux 4.14.211

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ieaef9d095569aaef94b4278a1006afc8d2cfeba9

Linux 4.14.211

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201206111555.569713359@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/i40iw: Address an mmap handler exploit in i40iw

commit 2ed381439e89fa6d1a0839ef45ccd45d99d8e915 upstream.

i40iw_mmap manipulates the vma->vm_pgoff to differentiate a push page mmap
vs a doorbell mmap, and uses it to compute the pfn in remap_pfn_range
without any validation. This is vulnerable to an mmap exploit as described
in: https://lore.kernel.org/r/20201119093523.7588-1-zhudi21@huawei.com

The push feature is disabled in the driver currently and therefore no push
mmaps are issued from user-space. The feature does not work as expected in
the x722 product.

Remove the push module parameter and all VMA attribute manipulations for
this feature in i40iw_mmap. Update i40iw_mmap to only allow DB user
mmapings at offset = 0. Check vm_pgoff for zero and if the mmaps are bound
to a single page.

Cc: <stable@kernel.org>
Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20201125005616.1800-2-shiraz.saleem@intel.com
Reported-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add ByteSpeed touchpad to noloop table

commit a48491c65b513e5cdc3e7a886a4db915f848a5f5 upstream.

It looks like the C15B laptop got another vendor: ByteSpeed LLC.

Avoid AUX loopback on this touchpad as well, thus input subsystem will
be able to recognize a Synaptics touchpad in the AUX port.

BugLink: https://bugs.launchpad.net/bugs/1906128
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20201201054723.5939-1-po-hsu.lin@canonical.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - support Ardwiino Controllers

commit 2aab1561439032be2e98811dd0ddbeb5b2ae4c61 upstream.

This commit adds support for Ardwiino Controllers

Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Link: https://lore.kernel.org/r/20201201071922.131666-1-sanjay.govind9@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: US16x08: fix value count for level meters

commit 402d5840b0d40a2a26c8651165d29b534abb6d36 upstream.

The level meter control returns 34 integers of info. This fixes:

snd-usb-audio 3-1:1.0: control 2:0:0:Level Meter:0: access overflow

Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20201127132635.18947-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: net: correct interrupt flags in examples

[ Upstream commit 4d521943f76bd0d1e68ea5e02df7aadd30b2838a ]

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix wrong address reclaim when command interface is down

[ Upstream commit 1d2bb5ad89f47d8ce8aedc70ef85059ab3870292 ]

When command interface is down, driver to reclaim all 4K page chucks that
were hold by the Firmeware. Fix a bug for 64K page size systems, where
driver repeatedly released only the first chunk of the page.

Define helper function to fill 4K chunks for a given Firmware pages.
Iterate over all unreleased Firmware pages and call the hepler per each.

Fixes: 5adff6a08862 ("net/mlx5: Fix incorrect page count when in internal error")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: pasemi: fix error return code in pasemi_mac_open()

[ Upstream commit aba84871bd4f52c4dfcf3ad5d4501a6c9d2de90e ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 72b05b9940f0 ("pasemi_mac: RX/TX ring management cleanup")
Fixes: 8d636d8bc5ff ("pasemi_mac: jumbo frame support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903035-1838-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxgb3: fix error return code in t3_sge_alloc_qset()

[ Upstream commit ff9924897f8bfed82e61894b373ab9d2dfea5b10 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b1fb1f280d09 ("cxgb3 - Fix dma mapping error path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/x25: prevent a couple of overflows

[ Upstream commit 6ee50c8e262a0f0693dad264c3c99e30e6442a56 ]

The .x25_addr[] address comes from the user and is not necessarily
NUL terminated.  This leads to a couple problems.  The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.

The second problem is more subtle and could result in memory corruption.
The call tree is:
  x25_connect()
  --> x25_write_internal()
      --> x25_addr_aton()

The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.

Verify that the strings are NUL terminated and return -EINVAL if they
are not.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: a9288525d2ae ("X25: Dont let x25_bind use addresses containing characters")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: Fix TX completion error handling

[ Upstream commit ba246c175116e2e8fa4fdfa5f8e958e086a9a818 ]

TX completions received with an error return code are not
being processed properly. When an error code is seen, do not
proceed to the next completion before cleaning up the existing
entry's data structures.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: Ensure that SCRQ entry reads are correctly ordered

[ Upstream commit b71ec952234610b4f90ef17a2fdcb124d5320070 ]

Ensure that received Subordinate Command-Response Queue (SCRQ)
entries are properly read in order by the driver. These queues
are used in the ibmvnic device to process RX buffer and TX completion
descriptors. dma_rmb barriers have been added after checking for a
pending descriptor to ensure the correct descriptor entry is checked
and after reading the SCRQ descriptor to ensure the entire
descriptor is read before processing.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Fix tos mask in inet_rtm_getroute()

[ Upstream commit 1ebf179037cb46c19da3a9c1e2ca16e7a754b75e ]

When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.

As a result, "ip route get" can return a different route than what
would be used when sending real packets.

For example:

    $ ip route add 192.0.2.11/32 dev eth0
    $ ip route add unreachable 192.0.2.11/32 tos 2
    $ ip route get 192.0.2.11 tos 2
    RTNETLINK answers: No route to host

But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:

    $ ping -c 1 -Q 2 192.0.2.11
    PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
    64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms

    --- 192.0.2.11 ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms

This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.

Fixes: 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversal

[ Upstream commit 44f64f23bae2f0fad25503bc7ab86cd08d04cd47 ]

Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:

For hook NF_INET_PRE_ROUTING:
  setup_pre_routing / br_nf_pre_routing_finish

For hook NF_INET_FORWARD:
  br_nf_forward_ip / br_nf_forward_finish

But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:

  /* We assume any code from br_dev_queue_push_xmit onwards doesn't care
   * about the value of skb->pkt_type. */

But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:

  br_nf_pre_routing
  br_nf_pre_routing_ipv6
     br_nf_pre_routing_finish
  br_nf_forward_ip
     br_nf_forward_finish
  br_nf_post_routing           <- pkt_type is updated to PACKET_HOST
     br_nf_dev_queue_xmit      <- but not reverted to its original value
  vxlan_xmit
     vxlan_xmit_one
        skb_tunnel_check_pmtu  <- a check on pkt_type is performed

In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).

If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: wait for sysfs kobject destruction before freeing struct slave

[ Upstream commit b9ad3e9f5a7a760ab068e33e1f18d240ba32ce92 ]

syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, releasing a
struct slave device could result in the following splat:

  kobject: 'bonding_slave' (00000000cecdd4fe): kobject_release, parent 0000000074ceb2b2 (delayed 1000)
  bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
  ------------[ cut here ]------------
  ODEBUG: free active (active state 0) object type: timer_list hint: workqueue_select_cpu_near kernel/workqueue.c:1549 [inline]
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98 kernel/workqueue.c:1600
  WARNING: CPU: 1 PID: 842 at lib/debugobjects.c:485 debug_print_object+0x180/0x240 lib/debugobjects.c:485
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 1 PID: 842 Comm: kworker/u4:4 Tainted: G S                5.9.0-rc8+ #96
  Hardware name: linux,dummy-virt (DT)
  Workqueue: netns cleanup_net
  Call trace:
   dump_backtrace+0x0/0x4d8 include/linux/bitmap.h:239
   show_stack+0x34/0x48 arch/arm64/kernel/traps.c:142
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x174/0x1f8 lib/dump_stack.c:118
   panic+0x360/0x7a0 kernel/panic.c:231
   __warn+0x244/0x2ec kernel/panic.c:600
   report_bug+0x240/0x398 lib/bug.c:198
   bug_handler+0x50/0xc0 arch/arm64/kernel/traps.c:974
   call_break_hook+0x160/0x1d8 arch/arm64/kernel/debug-monitors.c:322
   brk_handler+0x30/0xc0 arch/arm64/kernel/debug-monitors.c:329
   do_debug_exception+0x184/0x340 arch/arm64/mm/fault.c:864
   el1_dbg+0x48/0xb0 arch/arm64/kernel/entry-common.c:65
   el1_sync_handler+0x170/0x1c8 arch/arm64/kernel/entry-common.c:93
   el1_sync+0x80/0x100 arch/arm64/kernel/entry.S:594
   debug_print_object+0x180/0x240 lib/debugobjects.c:485
   __debug_check_no_obj_freed lib/debugobjects.c:967 [inline]
   debug_check_no_obj_freed+0x200/0x430 lib/debugobjects.c:998
   slab_free_hook mm/slub.c:1536 [inline]
   slab_free_freelist_hook+0x190/0x210 mm/slub.c:1577
   slab_free mm/slub.c:3138 [inline]
   kfree+0x13c/0x460 mm/slub.c:4119
   bond_free_slave+0x8c/0xf8 drivers/net/bonding/bond_main.c:1492
   __bond_release_one+0xe0c/0xec8 drivers/net/bonding/bond_main.c:2190
   bond_slave_netdev_event drivers/net/bonding/bond_main.c:3309 [inline]
   bond_netdev_event+0x8f0/0xa70 drivers/net/bonding/bond_main.c:3420
   notifier_call_chain+0xf0/0x200 kernel/notifier.c:83
   __raw_notifier_call_chain kernel/notifier.c:361 [inline]
   raw_notifier_call_chain+0x44/0x58 kernel/notifier.c:368
   call_netdevice_notifiers_info+0xbc/0x150 net/core/dev.c:2033
   call_netdevice_notifiers_extack net/core/dev.c:2045 [inline]
   call_netdevice_notifiers net/core/dev.c:2059 [inline]
   rollback_registered_many+0x6a4/0xec0 net/core/dev.c:9347
   unregister_netdevice_many.part.0+0x2c/0x1c0 net/core/dev.c:10509
   unregister_netdevice_many net/core/dev.c:10508 [inline]
   default_device_exit_batch+0x294/0x338 net/core/dev.c:10992
   ops_exit_list.isra.0+0xec/0x150 net/core/net_namespace.c:189
   cleanup_net+0x44c/0x888 net/core/net_namespace.c:603
   process_one_work+0x96c/0x18c0 kernel/workqueue.c:2269
   worker_thread+0x3f0/0xc30 kernel/workqueue.c:2415
   kthread+0x390/0x498 kernel/kthread.c:292
   ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:925

This is a potential use-after-free if the sysfs nodes are being accessed
whilst removing the struct slave, so wait for the object destruction to
complete before freeing the struct slave itself.

Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.")
Fixes: a068aab42258 ("bonding: Fix reference count leak in bond_sysfs_slave_add.")
Cc: Qiushi Wu <wu000273@umn.edu>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20201120142827.879226-1-jamie@nuviainc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbnet: ipheth: fix connectivity with iOS 14

[ Upstream commit f33d9e2b48a34e1558b67a473a1fc1d6e793f93c ]

Starting with iOS 14 released in September 2020, connectivity using the
personal hotspot USB tethering function of iOS devices is broken.

Communication between the host and the device (for example ICMP traffic
or DNS resolution using the DNS service running in the device itself)
works fine, but communication to endpoints further away doesn't work.

Investigation on the matter shows that no UDP and ICMP traffic from the
tethered host is reaching the Internet at all. For TCP traffic there are
exchanges between tethered host and server but packets are modified in
transit leading to impossible communication.

After some trials Matti Vuorela discovered that reducing the URB buffer
size by two bytes restored the previous behavior. While a better
solution might exist to fix the issue, since the protocol is not
publicly documented and considering the small size of the fix, let's do
that.

Tested-by: Matti Vuorela <matti.vuorela@bitfactor.fi>
Signed-off-by: Yves-Alexis Perez <corsac@corsac.net>
Link: https://lore.kernel.org/linux-usb/CAAn0qaXmysJ9vx3ZEMkViv_B19ju-_ExN8Yn_uSefxpjS6g4Lw@mail.gmail.com/
Link: https://github.com/libimobiledevice/libimobiledevice/issues/1038
Link: https://lore.kernel.org/r/20201119172439.94988-1-corsac@corsac.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: honor IOCB_NOWAIT flag

[ Upstream commit 5aac0390a63b8718237a61dd0d24a29201d1c94a ]

tun only checks the file O_NONBLOCK flag, but it should also be checking
the iocb IOCB_NOWAIT flag. Any fops using ->read/write_iter() should check
both, otherwise it breaks users that correctly expect O_NONBLOCK semantics
if IOCB_NOWAIT is set.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e9451860-96cc-c7c7-47b8-fe42cadd5f4c@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Set INET_ECN_xmit configuration in tcp_reinit_congestion_control

[ Upstream commit 55472017a4219ca965a957584affdb17549ae4a4 ]

When setting congestion control via a BPF program it is seen that the
SYN/ACK for packets within a given flow will not include the ECT0 flag. A
bit of simple printk debugging shows that when this is configured without
BPF we will see the value INET_ECN_xmit value initialized in
tcp_assign_congestion_control however when we configure this via BPF the
socket is in the closed state and as such it isn't configured, and I do not
see it being initialized when we transition the socket into the listen
state. The result of this is that the ECT0 bit is configured based on
whatever the default state is for the socket.

Any easy way to reproduce this is to monitor the following with tcpdump:
tools/testing/selftests/bpf/test_progs -t bpf_tcp_ca

Without this patch the SYN/ACK will follow whatever the default is. If dctcp
all SYN/ACK packets will have the ECT0 bit set, and if it is not then ECT0
will be cleared on all SYN/ACK packets. With this patch applied the SYN/ACK
bit matches the value seen on the other packets in the given stream.

Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sock: set sk_err to ee_errno on dequeue from errq

[ Upstream commit 985f7337421a811cb354ca93882f943c8335a6f5 ]

When setting sk_err, set it to ee_errno, not ee_origin.

Commit f5f99309fa74 ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):

  -       sk->sk_err = err;

Commit 38b257938ac6 ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:

  +       if (icmp_next)
  +               sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;

But read from ee_errno.

Fixes: 38b257938ac6 ("sock: reset sk_err when the error queue is empty")
Reported-by: Ayush Ranjan <ayushranjan@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rose: Fix Null pointer dereference in rose_send_frame()

[ Upstream commit 3b3fd068c56e3fbea30090859216a368398e39bf ]

rose_send_frame() dereferences `neigh->dev` when called from
rose_transmit_clear_request(), and the first occurrence of the
`neigh` is in rose_loopback_timer() as `rose_loopback_neigh`,
and it is initialized in rose_add_loopback_neigh() as NULL.
i.e when `rose_loopback_neigh` used in rose_loopback_timer()
its `->dev` was still NULL and rose_loopback_timer() was calling
rose_rx_call_request() without checking for NULL.

- net/rose/rose_link.c
This bug seems to get triggered in this line:

rose_call = (ax25_address *)neigh->dev->dev_addr;

Fix it by adding NULL checking for `rose_loopback_neigh->dev`
in rose_loopback_timer().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: syzbot+a1c743815982d9496393@syzkaller.appspotmail.com
Tested-by: syzbot+a1c743815982d9496393@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=9d2a7ca8c7f2e4b682c97578dfa3f236258300b3
Signed-off-by: Anmol Karn <anmol.karan123@gmail.com>
Link: https://lore.kernel.org/r/20201119191043.28813-1-anmol.karan123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/af_iucv: set correct sk_protocol for child sockets

[ Upstream commit c5dab0941fcdc9664eb0ec0d4d51433216d91336 ]

Child sockets erroneously inherit their parent's sk_type (ie. SOCK_*),
instead of the PF_IUCV protocol that the parent was created with in
iucv_sock_create().

We're currently not using sk->sk_protocol ourselves, so this shouldn't
have much impact (except eg. getting the output in skb_dump() right).

Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20201120100657.34407-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UPSTREAM: arm64: sysreg: Clean up instructions for modifying PSTATE fields

Instructions for modifying the PSTATE fields which were not supported
in the older toolchains (e.g, PAN, UAO) are generated using macros.
We have so far used the normal sys_reg() helper for defining the PSTATE
fields. While this works fine, it is really difficult to correlate the
code with the Arm ARM definition.

As per Arm ARM, the PSTATE fields are defined only using Op1, Op2 fields,
with fixed values for Op0, CRn. Also the CRm field has been reserved
for the Immediate value for the instruction. So using the sys_reg()
looks quite confusing.

This patch cleans up the instruction helpers by bringing them
in line with the Arm ARM definitions to make it easier to correlate
code with the document. No functional changes.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 74e248286e1d04b0d9bfdd002450ef0211f6f29f)
Change-Id: I1970db346e00d642e1237b78502b4fbdea0ae4f9

ANDROID: cuttlefish_defconfig: Disable CONFIG_KSM

This feature is not recommended for Android and causes selinux denials
when running "adb bugreport". Remove it.

Bug: 174771868
Test: launch_cvd
Change-Id: If009c94f3d77d8cb25b2ff845fc47015841de610
Signed-off-by: Alistair Delva <adelva@google.com>

Merge 4.14.210 into android-4.14-q

Changes in 4.14.210
perf event: Check ref_reloc_sym before using it
mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
btrfs: fix lockdep splat when reading qgroup config on mount
wireless: Use linux/stddef.h instead of stddef.h
PCI: Add device even if driver attach failed
btrfs: tree-checker: Enhance chunk checker to validate chunk profile
btrfs: adjust return values of btrfs_inode_by_name
btrfs: inode: Verify inode mode to avoid NULL pointer dereference
arm64: pgtable: Fix pte_accessible()
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
ALSA: hda/hdmi: Use single mutex unlock in error paths
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
HID: cypress: Support Varmilo Keyboards' media hotkeys
Input: i8042 - allow insmod to succeed on devices without an i8042 controller
HID: hid-sensor-hub: Fix issue with devices with no report ID
dmaengine: xilinx_dma: use readl_poll_timeout_atomic variant
x86/xen: don't unbind uninitialized lock_kicker_irq
HID: Add Logitech Dinovo Edge battery quirk
proc: don't allow async path resolution of /proc/self components
nvme: free sq/cq dbbuf pointers when dbbuf set fails
dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size
scsi: libiscsi: Fix NOP race condition
scsi: target: iscsi: Fix cmd abort fabric stop race
perf/x86: fix sysfs type mismatches
phy: tegra: xusb: Fix dangling pointer on probe failure
batman-adv: set .owner to THIS_MODULE
scsi: ufs: Fix race between shutdown and runtime resume flow
bnxt_en: fix error return code in bnxt_init_one()
bnxt_en: fix error return code in bnxt_init_board()
video: hyperv_fb: Fix the cache type when mapping the VRAM
bnxt_en: Release PCI regions when DMA mask setup fails during probe.
IB/mthca: fix return value of error branch in mthca_init_cq()
nfc: s3fwrn5: use signed integer for parsing GPIO numbers
net: ena: set initial DMA width to avoid intel iommu issue
ibmvnic: fix NULL pointer dereference in reset_sub_crq_queues
ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq
efivarfs: revert "fix memory leak in efivarfs_create()"
can: gs_usb: fix endianess problem with candleLight firmware
platform/x86: toshiba_acpi: Fix the wrong variable assignment
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
perf probe: Fix to die_entrypc() returns error correctly
USB: core: Change %pK for __user pointers to %px
usb: gadget: f_midi: Fix memleak in f_midi_alloc
usb: gadget: Fix memleak in gadgetfs_fill_super
x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb
x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak
x86/resctrl: Add necessary kernfs_put() calls to prevent refcount leak
USB: core: add endpoint-blacklist quirk
USB: core: Fix regression in Hercules audio card
Linux 4.14.210

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3f9b7519a1580950d91fdc9db396038c0efcc614

Linux 4.14.210

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20201201084644.803812112@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Fix regression in Hercules audio card

commit 184eead057cc7e803558269babc1f2cfb9113ad1 upstream

Commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints")
aimed to make the USB stack more reliable by detecting and skipping
over endpoints that are duplicated between interfaces.  This caused a
regression for a Hercules audio card (reported as Bugzilla #208357),
which contains such non-compliant duplications.  Although the
duplications are harmless, skipping the valid endpoints prevented the
device from working.

This patch fixes the regression by adding ENDPOINT_IGNORE quirks for
the Hercules card, telling the kernel to ignore the invalid duplicate
endpoints and thereby allowing the valid endpoints to be used as
intended.

Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints")
CC: <stable@vger.kernel.org>
Reported-by: Alexander Chalikiopoulos <bugzilla.kernel.org@mrtoasted.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20201119170040.GA576844@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: use usb_endpoint_blacklist and USB_QUIRK_ENDPOINT_BLACKLIST]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: add endpoint-blacklist quirk

commit 73f8bda9b5dc1c69df2bc55c0cbb24461a6391a9 upstream

Add a new device quirk that can be used to blacklist endpoints.

Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate
endpoints") USB core ignores any duplicate endpoints found during
descriptor parsing.

In order to handle devices where the first interfaces with duplicate
endpoints are the ones that should have their endpoints ignored, we need
to add a blacklist.

Tested-by: edes <edes@gmx.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Add necessary kernfs_put() calls to prevent refcount leak

commit 758999246965eeb8b253d47e72f7bfe508804b16 upstream.

On resource group creation via a mkdir an extra kernfs_node reference is
obtained by kernfs_get() to ensure that the rdtgroup structure remains
accessible for the rdtgroup_kn_unlock() calls where it is removed on
deletion. Currently the extra kernfs_node reference count is only
dropped by kernfs_put() in rdtgroup_kn_unlock() while the rdtgroup
structure is removed in a few other locations that lack the matching
reference drop.

In call paths of rmdir and umount, when a control group is removed,
kernfs_remove() is called to remove the whole kernfs nodes tree of the
control group (including the kernfs nodes trees of all child monitoring
groups), and then rdtgroup structure is freed by kfree(). The rdtgroup
structures of all child monitoring groups under the control group are
freed by kfree() in free_all_child_rdtgrp().

Before calling kfree() to free the rdtgroup structures, the kernfs node
of the control group itself as well as the kernfs nodes of all child
monitoring groups still take the extra references which will never be
dropped to 0 and the kernfs nodes will never be freed. It leads to
reference count leak and kernfs_node_cache memory leak.

For example, reference count leak is observed in these two cases:
  (1) mount -t resctrl resctrl /sys/fs/resctrl
      mkdir /sys/fs/resctrl/c1
      mkdir /sys/fs/resctrl/c1/mon_groups/m1
      umount /sys/fs/resctrl

  (2) mkdir /sys/fs/resctrl/c1
      mkdir /sys/fs/resctrl/c1/mon_groups/m1
      rmdir /sys/fs/resctrl/c1

The same reference count leak issue also exists in the error exit paths
of mkdir in mkdir_rdt_prepare() and rdtgroup_mkdir_ctrl_mon().

Fix this issue by following changes to make sure the extra kernfs_node
reference on rdtgroup is dropped before freeing the rdtgroup structure.
  (1) Introduce rdtgroup removal helper rdtgroup_remove() to wrap up
  kernfs_put() and kfree().

  (2) Call rdtgroup_remove() in rdtgroup removal path where the rdtgroup
  structure is about to be freed by kfree().

  (3) Call rdtgroup_remove() or kernfs_put() as appropriate in the error
  exit paths of mkdir where an extra reference is taken by kernfs_get().

Backporting notes:

Since upstream commit fa7d949337cc ("x86/resctrl: Rename and move rdt
files to a separate directory"), the file
arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to
arch/x86/kernel/cpu/resctrl/rdtgroup.c.
Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
in older stable trees.

Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system")
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1604085088-31707-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak

commit fd8d9db3559a29fd737bcdb7c4fcbe1940caae34 upstream.

Willem reported growing of kernfs_node_cache entries in slabtop when
repeatedly creating and removing resctrl subdirectories as well as when
repeatedly mounting and unmounting the resctrl filesystem.

On resource group (control as well as monitoring) creation via a mkdir
an extra kernfs_node reference is obtained to ensure that the rdtgroup
structure remains accessible for the rdtgroup_kn_unlock() calls where it
is removed on deletion. The kernfs_node reference count is dropped by
kernfs_put() in rdtgroup_kn_unlock().

With the above explaining the need for one kernfs_get()/kernfs_put()
pair in resctrl there are more places where a kernfs_node reference is
obtained without a corresponding release. The excessive amount of
reference count on kernfs nodes will never be dropped to 0 and the
kernfs nodes will never be freed in the call paths of rmdir and umount.
It leads to reference count leak and kernfs_node_cache memory leak.

Remove the superfluous kernfs_get() calls and expand the existing
comments surrounding the remaining kernfs_get()/kernfs_put() pair that
remains in use.

Superfluous kernfs_get() calls are removed from two areas:

  (1) In call paths of mount and mkdir, when kernfs nodes for "info",
  "mon_groups" and "mon_data" directories and sub-directories are
  created, the reference count of newly created kernfs node is set to 1.
  But after kernfs_create_dir() returns, superfluous kernfs_get() are
  called to take an additional reference.

  (2) kernfs_get() calls in rmdir call paths.

Backporting notes:

Since upstream commit fa7d949337cc ("x86/resctrl: Rename and move rdt
files to a separate directory"), the file
arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to
arch/x86/kernel/cpu/resctrl/rdtgroup.c.
Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
for older stable trees.

Upstream commit 17eafd076291 ("x86/intel_rdt: Split resource group
removal in two") moved part of resource group removal code from
rdtgroup_rmdir_ctrl() into a separate function rdtgroup_ctrl_remove().
Apply the change against original code base of rdtgroup_rmdir_ctrl() for
older stable trees.

Fixes: 17eafd076291 ("x86/intel_rdt: Split resource group removal in two")
Fixes: 4af4a88e0c92 ("x86/intel_rdt/cqm: Add mount,umount support")
Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data")
Fixes: c7d9aac61311 ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring")
Fixes: 5dc1d5c6bac2 ("x86/intel_rdt: Simplify info and base file lists")
Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system")
Fixes: 4e978d06dedb ("x86/intel_rdt: Add "info" files to resctrl file system")
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1604085053-31639-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb

commit 33fc379df76b4991e5ae312f07bcd6820811971e upstream.

When spectre_v2_user={seccomp,prctl},ibpb is specified on the command
line, IBPB is force-enabled and STIPB is conditionally-enabled (or not
available).

However, since

  21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")

the spectre_v2_user_ibpb variable is set to SPECTRE_V2_USER_{PRCTL,SECCOMP}
instead of SPECTRE_V2_USER_STRICT, which is the actual behaviour.
Because the issuing of IBPB relies on the switch_mm_*_ibpb static
branches, the mitigations behave as expected.

Since

  1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP")

this discrepency caused the misreporting of IB speculation via prctl().

On CPUs with STIBP always-on and spectre_v2_user=seccomp,ibpb,
prctl(PR_GET_SPECULATION_CTRL) would return PR_SPEC_PRCTL |
PR_SPEC_ENABLE instead of PR_SPEC_DISABLE since both IBPB and STIPB are
always on. It also allowed prctl(PR_SET_SPECULATION_CTRL) to set the IB
speculation mode, even though the flag is ignored.

Similarly, for CPUs without SMT, prctl(PR_GET_SPECULATION_CTRL) should
also return PR_SPEC_DISABLE since IBPB is always on and STIBP is not
available.

 [ bp: Massage commit message. ]

Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
Fixes: 1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201110123349.1.Id0cbf996d2151f4c143c90f9028651a5b49a5908@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: Fix memleak in gadgetfs_fill_super

commit 87bed3d7d26c974948a3d6e7176f304b2d41272b upstream.

usb_get_gadget_udc_name will alloc memory for CHIP
in "Enomem" branch. we should free it before error
returns to prevent memleak.

Fixes: 175f712119c57 ("usb: gadget: provide interface for legacy gadgets to get UDC name")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201117021629.1470544-3-zhangqilong3@huawei.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_midi: Fix memleak in f_midi_alloc

commit e7694cb6998379341fd9bf3bd62b48c4e6a79385 upstream.

In the error path, if midi is not null, we should
free the midi->id if necessary to prevent memleak.

Fixes: b85e9de9e818d ("usb: gadget: f_midi: convert to new function interface with backward compatibility")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201117021629.1470544-2-zhangqilong3@huawei.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Change %pK for __user pointers to %px

commit f3bc432aa8a7a2bfe9ebb432502be5c5d979d7fe upstream.

Commit 2f964780c03b ("USB: core: replace %p with %pK") used the %pK
format specifier for a bunch of __user pointers.  But as the 'K' in
the specifier indicates, it is meant for kernel pointers.  The reason
for the %pK specifier is to avoid leaks of kernel addresses, but when
the pointer is to an address in userspace the security implications
are minimal.  In particular, no kernel information is leaked.

This patch changes the __user %pK specifiers (used in a bunch of
debugging output lines) to %px, which will always print the actual
address with no mangling.  (Notably, there is no printk format
specifier particularly intended for __user pointers.)

Fixes: 2f964780c03b ("USB: core: replace %p with %pK")
CC: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
CC: <stable@vger.kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20201119170228.GB576844@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Fix to die_entrypc() returns error correctly

[ Upstream commit ab4200c17ba6fe71d2da64317aae8a8aa684624c ]

Fix die_entrypc() to return error correctly if the DIE has no
DW_AT_ranges attribute. Since dwarf_ranges() will treat the case as an
empty ranges and return 0, we have to check it by ourselves.

Fixes: 91e2f539eeda ("perf probe: Fix to show function entry line as probe-able")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/160645612634.2824037.5284932731175079426.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: m_can: fix nominal bitiming tseg2 min for version >= 3.1

[ Upstream commit e3409e4192535fbcc86a84b7a65d9351f46039ec ]

At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid
register values for "Nominal Time segment after sample point (NTSEG2)" are from
1 to 127. As the hardware uses a value of one more than the programmed value,
mean tseg2_min is 2.

This patch fixes the tseg2_min value accordingly.

Cc: Dan Murphy <dmurphy@ti.com>
Cc: Mario Huettel <mario.huettel@gmx.net>
Acked-by: Sriram Dash <sriram.dash@samsung.com>
Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de
Fixes: b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: toshiba_acpi: Fix the wrong variable assignment

[ Upstream commit 2a72c46ac4d665614faa25e267c3fb27fb729ed7 ]

The commit 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up
variable declaration") cleans up variable declaration in
video_proc_write(). Seems it does the variable assignment in the
wrong place, this results in dead code and changes the source code
logic. Fix it by doing the assignment at the beginning of the funciton.

Fixes: 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up variable declaration")
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1606024177-16481-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: gs_usb: fix endianess problem with candleLight firmware

[ Upstream commit 4ba1cb39fce4464151517a37ce0ac0a1a3f580d6 ]

The firmware on the original USB2CAN by Geschwister Schneider Technologie
Entwicklungs- und Vertriebs UG exchanges all data between the host and the
device in host byte order. This is done with the struct
gs_host_config::byte_order member, which is sent first to indicate the desired
byte order.

The widely used open source firmware candleLight doesn't support this feature
and exchanges the data in little endian byte order. This breaks if a device
with candleLight firmware is used on big endianess systems.

To fix this problem, all u32 (but not the struct gs_host_frame::echo_id, which
is a transparent cookie) are converted to __le32.

Cc: Maximilian Schneider <max@schneidersoft.net>
Cc: Hubert Denkmair <hubert@denkmair.de>
Reported-by: Michael Rausch <mr@netadair.de>
Link: https://lore.kernel.org/r/b58aace7-61f3-6df7-c6df-69fee2c66906@netadair.de
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/r/20201120103818.3386964-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efivarfs: revert "fix memory leak in efivarfs_create()"

[ Upstream commit ff04f3b6f2e27f8ae28a498416af2a8dd5072b43 ]

The memory leak addressed by commit fe5186cf12e3 is a false positive:
all allocations are recorded in a linked list, and freed when the
filesystem is unmounted. This leads to double frees, and as reported
by David, leads to crashes if SLUB is configured to self destruct when
double frees occur.

So drop the redundant kfree() again, and instead, mark the offending
pointer variable so the allocation is ignored by kmemleak.

Cc: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Fixes: fe5186cf12e3 ("efivarfs: fix memory leak in efivarfs_create()")
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq

[ Upstream commit 0e435befaea45f7ea58682eecab5e37e05b2ce65 ]

crq->msgs could be NULL if the previous reset did not complete after
freeing crq->msgs. Check for NULL before dereferencing them.

Snippet of call trace:
...
ibmvnic 30000003 env3 (unregistering): Releasing sub-CRQ
ibmvnic 30000003 env3 (unregistering): Releasing CRQ
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0000000000c1a30
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvnic(E-) rpadlpar_io rpaphp xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables xsk_diag tcp_diag udp_diag tun raw_diag inet_diag unix_diag bridge af_packet_diag netlink_diag stp llc rfkill sunrpc pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ibmvnic]
CPU: 20 PID: 8426 Comm: kworker/20:0 Tainted: G            E     5.10.0-rc1+ #12
Workqueue: events __ibmvnic_reset [ibmvnic]
NIP:  c0000000000c1a30 LR: c008000001b00c18 CTR: 0000000000000400
REGS: c00000000d05b7a0 TRAP: 0380   Tainted: G            E      (5.10.0-rc1+)
MSR:  800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 44002480  XER: 20040000
CFAR: c0000000000c19ec IRQMASK: 0
GPR00: 0000000000000400 c00000000d05ba30 c008000001b17c00 0000000000000000
GPR04: 0000000000000000 0000000000000000 0000000000000000 00000000000001e2
GPR08: 000000000001f400 ffffffffffffd950 0000000000000000 c008000001b0b280
GPR12: c0000000000c19c8 c00000001ec72e00 c00000000019a778 c00000002647b440
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000006 0000000000000001 0000000000000003 0000000000000002
GPR24: 0000000000001000 c008000001b0d570 0000000000000005 c00000007ab5d550
GPR28: c00000007ab5c000 c000000032fcf848 c00000007ab5cc00 c000000032fcf800
NIP [c0000000000c1a30] memset+0x68/0x104
LR [c008000001b00c18] ibmvnic_reset_crq+0x70/0x110 [ibmvnic]
Call Trace:
[c00000000d05ba30] [0000000000000800] 0x800 (unreliable)
[c00000000d05bab0] [c008000001b0a930] do_reset.isra.40+0x224/0x634 [ibmvnic]
[c00000000d05bb80] [c008000001b08574] __ibmvnic_reset+0x17c/0x3c0 [ibmvnic]
[c00000000d05bc50] [c00000000018d9ac] process_one_work+0x2cc/0x800
[c00000000d05bd20] [c00000000018df58] worker_thread+0x78/0x520
[c00000000d05bdb0] [c00000000019a934] kthread+0x1c4/0x1d0
[c00000000d05be20] [c00000000000d5d0] ret_from_kernel_thread+0x5c/0x6c

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: fix NULL pointer dereference in reset_sub_crq_queues

[ Upstream commit a0faaa27c71608799e0dd765c5af38a089091802 ]

adapter->tx_scrq and adapter->rx_scrq could be NULL if the previous reset
did not complete after freeing sub crqs. Check for NULL before
dereferencing them.

Snippet of call trace:
ibmvnic 30000006 env6: Releasing sub-CRQ
ibmvnic 30000006 env6: Releasing CRQ
...
ibmvnic 30000006 env6: Got Control IP offload Response
ibmvnic 30000006 env6: Re-setting tx_scrq[0]
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc008000003dea7cc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables xsk_diag tcp_diag udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag tun bridge stp llc rfkill sunrpc pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c sd_mod t10_pi sg ibmvscsi ibmvnic ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod
CPU: 80 PID: 1856 Comm: kworker/80:2 Tainted: G        W         5.8.0+ #4
Workqueue: events __ibmvnic_reset [ibmvnic]
NIP:  c008000003dea7cc LR: c008000003dea7bc CTR: 0000000000000000
REGS: c0000007ef7db860 TRAP: 0380   Tainted: G        W          (5.8.0+)
MSR:  800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 28002422  XER: 0000000d
CFAR: c000000000bd9520 IRQMASK: 0
GPR00: c008000003dea7bc c0000007ef7dbaf0 c008000003df7400 c0000007fa26ec00
GPR04: c0000007fcd0d008 c0000007fcd96350 0000000000000027 c0000007fcd0d010
GPR08: 0000000000000023 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000002000 c00000001ec18e00 c0000000001982f8 c0000007bad6e840
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 fffffffffffffef7
GPR24: 0000000000000402 c0000007fa26f3a8 0000000000000003 c00000016f8ec048
GPR28: 0000000000000000 0000000000000000 0000000000000000 c0000007fa26ec00
NIP [c008000003dea7cc] ibmvnic_reset_init+0x15c/0x258 [ibmvnic]
LR [c008000003dea7bc] ibmvnic_reset_init+0x14c/0x258 [ibmvnic]
Call Trace:
[c0000007ef7dbaf0] [c008000003dea7bc] ibmvnic_reset_init+0x14c/0x258 [ibmvnic] (unreliable)
[c0000007ef7dbb80] [c008000003de8860] __ibmvnic_reset+0x408/0x970 [ibmvnic]
[c0000007ef7dbc50] [c00000000018b7cc] process_one_work+0x2cc/0x800
[c0000007ef7dbd20] [c00000000018bd78] worker_thread+0x78/0x520
[c0000007ef7dbdb0] [c0000000001984c4] kthread+0x1d4/0x1e0
[c0000007ef7dbe20] [c00000000000cea8] ret_from_kernel_thread+0x5c/0x74

Fixes: 57a49436f4e8 ("ibmvnic: Reset sub-crqs during driver reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: set initial DMA width to avoid intel iommu issue

[ Upstream commit 09323b3bca95181c0da79daebc8b0603e500f573 ]

The ENA driver uses the readless mechanism, which uses DMA, to find
out what the DMA mask is supposed to be.

If DMA is used without setting the dma_mask first, it causes the
Intel IOMMU driver to think that ENA is a 32-bit device and therefore
disables IOMMU passthrough permanently.

This patch sets the dma_mask to be ENA_MAX_PHYS_ADDR_SIZE_BITS=48
before readless initialization in
ena_device_init()->ena_com_mmio_reg_read_request_init(),
which is large enough to workaround the intel_iommu issue.

DMA mask is set again to the correct value after it's received from the
device after readless is initialized.

The patch also changes the driver to use dma_set_mask_and_coherent()
function instead of the two pci_set_dma_mask() and
pci_set_consistent_dma_mask() ones. Both methods achieve the same
effect.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Mike Cui <mikecui@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: s3fwrn5: use signed integer for parsing GPIO numbers

[ Upstream commit d8f0a86795c69f5b697f7d9e5274c124da93c92d ]

GPIOs - as returned by of_get_named_gpio() and used by the gpiolib - are
signed integers, where negative number indicates error.  The return
value of of_get_named_gpio() should not be assigned to an unsigned int
because in case of !CONFIG_GPIOLIB such number would be a valid GPIO.

Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201123162351.209100-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mthca: fix return value of error branch in mthca_init_cq()

[ Upstream commit 6830ff853a5764c75e56750d59d0bbb6b26f1835 ]

We return 'err' in the error branch, but this variable may be set as zero
by the above code. Fix it by setting 'err' as a negative value before we
goto the error label.

Fixes: 74c2174e7be5 ("IB uverbs: add mthca user CQ support")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/1605837422-42724-1-git-send-email-wangxiongfeng2@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Release PCI regions when DMA mask setup fails during probe.

[ Upstream commit c54bc3ced5106663c2f2b44071800621f505b00e ]

Jump to init_err_release to cleanup.  bnxt_unmap_bars() will also be
called but it will do nothing if the BARs are not mapped yet.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1605858271-8209-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: hyperv_fb: Fix the cache type when mapping the VRAM

[ Upstream commit 5f1251a48c17b54939d7477305e39679a565382c ]

x86 Hyper-V used to essentially always overwrite the effective cache type
of guest memory accesses to WB. This was problematic in cases where there
is a physical device assigned to the VM, since that often requires that
the VM should have control over cache types. Thus, on newer Hyper-V since
2018, Hyper-V always honors the VM's cache type, but unexpectedly Linux VM
users start to complain that Linux VM's VRAM becomes very slow, and it
turns out that Linux VM should not map the VRAM uncacheable by ioremap().
Fix this slowness issue by using ioremap_cache().

On ARM64, ioremap_cache() is also required as the host also maps the VRAM
cacheable, otherwise VM Connect can't display properly with ioremap() or
ioremap_wc().

With this change, the VRAM on new Hyper-V is as fast as regular RAM, so
it's no longer necessary to use the hacks we added to mitigate the
slowness, i.e. we no longer need to allocate physical memory and use
it to back up the VRAM in Generation-1 VM, and we also no longer need to
allocate physical memory to back up the framebuffer in a Generation-2 VM
and copy the framebuffer to the real VRAM. A further big change will
address these for v5.11.

Fixes: 68a2d20b79b1 ("drivers/video: add Hyper-V Synthetic Video Frame Buffer Driver")
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/20201118000305.24797-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: fix error return code in bnxt_init_board()

[ Upstream commit 3383176efc0fb0c0900a191026468a58668b4214 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Link: https://lore.kernel.org/r/1605792621-6268-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: fix error return code in bnxt_init_one()

[ Upstream commit b5f796b62c98cd8c219c4b788ecb6e1218e648cb ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: c213eae8d3cd ("bnxt_en: Improve VF/PF link change logic.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Link: https://lore.kernel.org/r/1605701851-20270-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix race between shutdown and runtime resume flow

[ Upstream commit e92643db514803c2c87d72caf5950b4c0a8faf4a ]

If UFS host device is in runtime-suspended state while UFS shutdown
callback is invoked, UFS device shall be resumed for register
accesses. Currently only UFS local runtime resume function will be invoked
to wake up the host.  This is not enough because if someone triggers
runtime resume from block layer, then race may happen between shutdown and
runtime resume flow, and finally lead to unlocked register access.

To fix this, in ufshcd_shutdown(), use pm_runtime_get_sync() instead of
resuming UFS device by ufshcd_runtime_resume() "internally" to let runtime
PM framework manage the whole resume flow.

Link: https://lore.kernel.org/r/20201119062916.12931-1-stanley.chu@mediatek.com
Fixes: 57d104c153d3 ("ufs: add UFS power management support")
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: set .owner to THIS_MODULE

[ Upstream commit 14a2e551faea53d45bc11629a9dac88f88950ca7 ]

If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.

Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: tegra: xusb: Fix dangling pointer on probe failure

[ Upstream commit eb9c4dd9bdfdebaa13846c16a8c79b5b336066b6 ]

If, for some reason, the xusb PHY fails to probe, it leaves
a dangling pointer attached to the platform device structure.

This would normally be harmless, but the Tegra XHCI driver then
goes and extract that pointer from the PHY device. Things go
downhill from there:

    8.752082] [004d554e5145533c] address between user and kernel address ranges
[    8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+)
[    8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S      W   E     5.9.0-rc7-00298-gf6337624c4fe #1980
[    8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT)
[    8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[    8.752115] pc : kobject_put+0x1c/0x21c
[    8.752120] lr : put_device+0x20/0x30
[    8.752121] sp : ffffffc012eb3840
[    8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638
[    8.752125] x27: ffffffc008d56440 x26: 0000000000000000
[    8.752128] x25: ffffff81eb508200 x24: 0000000000000000
[    8.752130] x23: ffffff81eb538800 x22: 0000000000000000
[    8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810
[    8.752134] x19: 3d4d554e51455300 x18: 0000000000000020
[    8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94
[    8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90
[    8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8
[    8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea
[    8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8
[    8.752146] x7 : 0000000000000001 x6 : 0000000000000001
[    8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000
[    8.752150] x3 : 0000000000000001 x2 : 0000000000000001
[    8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300
[    8.752155] Call trace:
[    8.752157]  kobject_put+0x1c/0x21c
[    8.752160]  put_device+0x20/0x30
[    8.752164]  tegra_xusb_padctl_put+0x24/0x3c
[    8.752170]  tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra]
[    8.752174]  platform_drv_probe+0x60/0xb4
[    8.752176]  really_probe+0xf0/0x504
[    8.752179]  driver_probe_device+0x100/0x170
[    8.752181]  device_driver_attach+0xcc/0xd4
[    8.752183]  __driver_attach+0xb0/0x17c
[    8.752185]  bus_for_each_dev+0x7c/0xd4
[    8.752187]  driver_attach+0x30/0x3c
[    8.752189]  bus_add_driver+0x154/0x250
[    8.752191]  driver_register+0x84/0x140
[    8.752193]  __platform_driver_register+0x54/0x60
[    8.752197]  tegra_xusb_init+0x40/0x1000 [xhci_tegra]
[    8.752201]  do_one_initcall+0x54/0x2d0
[    8.752205]  do_init_module+0x68/0x29c
[    8.752207]  load_module+0x2178/0x26c0
[    8.752209]  __do_sys_finit_module+0xb0/0x120
[    8.752211]  __arm64_sys_finit_module+0x2c/0x40
[    8.752215]  el0_svc_common.constprop.0+0x80/0x240
[    8.752218]  do_el0_svc+0x30/0xa0
[    8.752220]  el0_svc+0x18/0x50
[    8.752223]  el0_sync_handler+0x90/0x318
[    8.752225]  el0_sync+0x158/0x180
[    8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000)
[    8.752232] ---[ end trace 90f6c89d62d85ff5 ]---

Reset the pointer on probe failure fixes the issue.

Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201013095820.311376-1-maz@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86: fix sysfs type mismatches

[ Upstream commit ebd19fc372e3e78bf165f230e7c084e304441c08 ]

This change switches rapl to use PMU_FORMAT_ATTR, and fixes two other
macros to use device_attribute instead of kobj_attribute to avoid
callback type mismatches that trip indirect call checking with Clang's
Control-Flow Integrity (CFI).

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20201113183126.1239404-1-samitolvanen@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: iscsi: Fix cmd abort fabric stop race

[ Upstream commit f36199355c64a39fe82cfddc7623d827c7e050da ]

Maurizio found a race where the abort and cmd stop paths can race as
follows:

 1. thread1 runs iscsit_release_commands_from_conn and sets
    CMD_T_FABRIC_STOP.

 2. thread2 runs iscsit_aborted_task and then does __iscsit_free_cmd. It
    then returns from the aborted_task callout and we finish
    target_handle_abort and do:

    target_handle_abort -> transport_cmd_check_stop_to_fabric ->
lio_check_stop_free -> target_put_sess_cmd

    The cmd is now freed.

 3. thread1 now finishes iscsit_release_commands_from_conn and runs
    iscsit_free_cmd while accessing a command we just released.

In __target_check_io_state we check for CMD_T_FABRIC_STOP and set the
CMD_T_ABORTED if the driver is not cleaning up the cmd because of a session
shutdown. However, iscsit_release_commands_from_conn only sets the
CMD_T_FABRIC_STOP and does not check to see if the abort path has claimed
completion ownership of the command.

This adds a check in iscsit_release_commands_from_conn so only the abort or
fabric stop path cleanup the command.

Link: https://lore.kernel.org/r/1605318378-9269-1-git-send-email-michael.christie@oracle.com
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libiscsi: Fix NOP race condition

[ Upstream commit fe0a8a95e7134d0b44cd407bc0085b9ba8d8fe31 ]

iSCSI NOPs are sometimes "lost", mistakenly sent to the user-land iscsid
daemon instead of handled in the kernel, as they should be, resulting in a
message from the daemon like:

  iscsid: Got nop in, but kernel supports nop handling.

This can occur because of the new forward- and back-locks, and the fact
that an iSCSI NOP response can occur before processing of the NOP send is
complete. This can result in "conn->ping_task" being NULL in
iscsi_nop_out_rsp(), when the pointer is actually in the process of being
set.

To work around this, we add a new state to the "ping_task" pointer. In
addition to NULL (not assigned) and a pointer (assigned), we add the state
"being set", which is signaled with an INVALID pointer (using "-1").

Link: https://lore.kernel.org/r/20201106193317.16993-1-leeman.duncan@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size

[ Upstream commit e773ca7da8beeca7f17fe4c9d1284a2b66839cc1 ]

Actually, burst size is equal to '1 << desc->rqcfg.brst_size'.
we should use burst size, not desc->rqcfg.brst_size.

dma memcpy performance on Rockchip RV1126
@ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA:

dmatest:

/# echo dma0chan0 > /sys/module/dmatest/parameters/channel
/# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size
/# echo 8 > /sys/module/dmatest/parameters/iterations
/# echo y > /sys/module/dmatest/parameters/norandom
/# echo y > /sys/module/dmatest/parameters/verbose
/# echo 1 > /sys/module/dmatest/parameters/run

dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000

Before:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0)

After this patch:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0)

After this patch and increase dma clk to 400MHz:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0)

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: free sq/cq dbbuf pointers when dbbuf set fails

[ Upstream commit 0f0d2c876c96d4908a9ef40959a44bec21bdd6cf ]

If Doorbell Buffer Config command fails even 'dev->dbbuf_dbs != NULL'
which means OACS indicates that NVME_CTRL_OACS_DBBUF_SUPP is set,
nvme_dbbuf_update_and_check_event() will check event even it's not been
successfully set.

This patch fixes mismatch among dbbuf for sq/cqs in case that dbbuf
command fails.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc: don't allow async path resolution of /proc/self components

[ Upstream commit 8d4c3e76e3be11a64df95ddee52e99092d42fc19 ]

If this is attempted by a kthread, then return -EOPNOTSUPP as we don't
currently support that. Once we can get task_pid_ptr() doing the right
thing, then this can go away again.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Add Logitech Dinovo Edge battery quirk

[ Upstream commit 7940fb035abd88040d56be209962feffa33b03d0 ]

The battery status is also being reported by the logitech-hidpp driver,
so ignore the standard HID battery status to avoid reporting the same
info twice.

Note the logitech-hidpp battery driver provides more info, such as properly
differentiating between charging and discharging. Also the standard HID
battery info seems to be wrong, reporting a capacity of just 26% after
fully charging the device.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: don't unbind uninitialized lock_kicker_irq

[ Upstream commit 65cae18882f943215d0505ddc7e70495877308e6 ]

When booting a hyperthreaded system with the kernel parameter
'mitigations=auto,nosmt', the following warning occurs:

    WARNING: CPU: 0 PID: 1 at drivers/xen/events/events_base.c:1112 unbind_from_irqhandler+0x4e/0x60
    ...
    Hardware name: Xen HVM domU, BIOS 4.2.amazon 08/24/2006
    ...
    Call Trace:
     xen_uninit_lock_cpu+0x28/0x62
     xen_hvm_cpu_die+0x21/0x30
     takedown_cpu+0x9c/0xe0
     ? trace_suspend_resume+0x60/0x60
     cpuhp_invoke_callback+0x9a/0x530
     _cpu_up+0x11a/0x130
     cpu_up+0x7e/0xc0
     bringup_nonboot_cpus+0x48/0x50
     smp_init+0x26/0x79
     kernel_init_freeable+0xea/0x229
     ? rest_init+0xaa/0xaa
     kernel_init+0xa/0x106
     ret_from_fork+0x35/0x40

The secondary CPUs are not activated with the nosmt mitigations and only
the primary thread on each CPU core is used. In this situation,
xen_hvm_smp_prepare_cpus(), and more importantly xen_init_lock_cpu(), is
not called, so the lock_kicker_irq is not initialized for the secondary
CPUs. Let's fix this by exiting early in xen_uninit_lock_cpu() if the
irq is not set to avoid the warning from above for each secondary CPU.

Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20201107011119.631442-1-bmasney@redhat.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: use readl_poll_timeout_atomic variant

[ Upstream commit 0ba2df09f1500d3f27398a3382b86d39c3e6abe2 ]

The xilinx_dma_poll_timeout macro is sometimes called while holding a
spinlock (see xilinx_dma_issue_pending() for an example) this means we
shouldn't sleep when polling the dma channel registers. To address it
in xilinx poll timeout macro use readl_poll_timeout_atomic instead of
readl_poll_timeout variant.

Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hid-sensor-hub: Fix issue with devices with no report ID

[ Upstream commit 34a9fa2025d9d3177c99351c7aaf256c5f50691f ]

Some HID devices don't use a report ID because they only have a single
report. In those cases, the report ID in struct hid_report will be zero
and the data for the report will start at the first byte, so don't skip
over the first byte.

Signed-off-by: Pablo Ceballos <pceballos@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - allow insmod to succeed on devices without an i8042 controller

[ Upstream commit b1884583fcd17d6a1b1bba94bbb5826e6b5c6e17 ]

The i8042 module exports several symbols which may be used by other
modules.

Before this commit it would refuse to load (when built as a module itself)
on systems without an i8042 controller.

This is a problem specifically for the asus-nb-wmi module. Many Asus
laptops support the Asus WMI interface. Some of them have an i8042
controller and need to use i8042_install_filter() to filter some kbd
events. Other models do not have an i8042 controller (e.g. they use an
USB attached kbd).

Before this commit the asus-nb-wmi driver could not be loaded on Asus
models without an i8042 controller, when the i8042 code was built as
a module (as Arch Linux does) because the module_init function of the
i8042 module would fail with -ENODEV and thus the i8042_install_filter
symbol could not be loaded.

This commit fixes this by exiting from module_init with a return code
of 0 if no controller is found.  It also adds a i8042_present bool to
make the module_exit function a no-op in this case and also adds a
check for i8042_present to the exported i8042_command function.

The latter i8042_present check should not really be necessary because
when builtin that function can already be used on systems without
an i8042 controller, but better safe then sorry.

Reported-and-tested-by: Marius Iacob <themariusus@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: cypress: Support Varmilo Keyboards' media hotkeys

[ Upstream commit 652f3d00de523a17b0cebe7b90debccf13aa8c31 ]

The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M)
exposes media control hotkeys as a USB HID consumer control device, but
these keys do not work in the current (5.8-rc1) kernel due to the
incorrect HID report descriptor. Fix the problem by modifying the
internal HID report descriptor.

More specifically, the keyboard report descriptor specifies the
logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage
boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an
incorrect interpretation of input reports, causing inputs to be ignored.
By setting the Logical Minimum to zero, we align the logical boundary
with the Usage ID boundary.

Some notes:

* There seem to be multiple variants of the VA104M keyboard. This
  patch specifically targets 04b4:07b1 variant.

* The device works out-of-the-box on Windows platform with the generic
  consumer control device driver (hidserv.inf). This suggests that
  Windows either ignores the Logical Minimum/Logical Maximum or
  interprets the Usage ID assignment differently from the linux
  implementation; Maybe there are other devices out there that only
  works on Windows due to this problem?

Signed-off-by: Frank Yang <puilp0502@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close

commit ce1558c285f9ad04c03b46833a028230771cc0a7 upstream

A race exists between closing a PCM and update of ELD data. In
hdmi_pcm_close(), hinfo->nid value is modified without taking
spec->pcm_lock. If this happens concurrently while processing an ELD
update in hdmi_pcm_setup_pin(), converter assignment may be done
incorrectly.

This bug was found by hitting a WARN_ON in snd_hda_spdif_ctls_assign()
in a HDMI receiver connection stress test:

[2739.684569] WARNING: CPU: 5 PID: 2090 at sound/pci/hda/patch_hdmi.c:1898 check_non_pcm_per_cvt+0x41/0x50 [snd_hda_codec_hdmi]
...
[2739.684707] Call Trace:
[2739.684720]  update_eld+0x121/0x5a0 [snd_hda_codec_hdmi]
[2739.684736]  hdmi_present_sense+0x21e/0x3b0 [snd_hda_codec_hdmi]
[2739.684750]  check_presence_and_report+0x81/0xd0 [snd_hda_codec_hdmi]
[2739.684842]  intel_audio_codec_enable+0x122/0x190 [i915]

Fixes: 42b2987079ec ("ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201013152628.920764-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: Use single mutex unlock in error paths

commit f69548ffafcc4942022f16f2f192b24143de1dba upstream

Instead of calling mutex_unlock() at each error path multiple times,
take the standard goto-and-a-single-unlock approach.  This will
simplify the code and make easier to find the unbalanced mutex locks.

No functional changes, but only the code readability improvement as a
preliminary work for further changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()

commit ff1712f953e27f0b0718762ec17d0adb15c9fd0b upstream.

With hardware dirty bit management, calling pte_wrprotect() on a writable,
dirty PTE will lose the dirty state and return a read-only, clean entry.

Move the logic from ptep_set_wrprotect() into pte_wrprotect() to ensure that
the dirty bit is preserved for writable entries, as this is required for
soft-dirty bit management if we enable it in the future.

Cc: <stable@vger.kernel.org>
Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201120143557.6715-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: pgtable: Fix pte_accessible()

commit 07509e10dcc77627f8b6a57381e878fe269958d3 upstream.

pte_accessible() is used by ptep_clear_flush() to figure out whether TLB
invalidation is necessary when unmapping pages for reclaim. Although our
implementation is correct according to the architecture, returning true
only for valid, young ptes in the absence of racing page-table
modifications, this is in fact flawed due to lazy invalidation of old
ptes in ptep_clear_flush_young() where we elide the expensive DSB
instruction for completing the TLB invalidation.

Rather than penalise the aging path, adjust pte_accessible() to return
true for any valid pte, even if the access flag is cleared.

Cc: <stable@vger.kernel.org>
Fixes: 76c714be0e5e ("arm64: pgtable: implement pte_accessible()")
Reported-by: Yu Zhao <yuzhao@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201120143557.6715-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: inode: Verify inode mode to avoid NULL pointer dereference

commit 6bf9e4bd6a277840d3fe8c5d5d530a1fbd3db592 upstream

[BUG]
When accessing a file on a crafted image, btrfs can crash in block layer:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  PGD 136501067 P4D 136501067 PUD 124519067 PMD 0
  CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc8-default #252
  RIP: 0010:end_bio_extent_readpage+0x144/0x700
  Call Trace:
   <IRQ>
   blk_update_request+0x8f/0x350
   blk_mq_end_request+0x1a/0x120
   blk_done_softirq+0x99/0xc0
   __do_softirq+0xc7/0x467
   irq_exit+0xd1/0xe0
   call_function_single_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:default_idle+0x1e/0x170

[CAUSE]
The crafted image has a tricky corruption, the INODE_ITEM has a
different type against its parent dir:

        item 20 key (268 INODE_ITEM 0) itemoff 2808 itemsize 160
                generation 13 transid 13 size 1048576 nbytes 1048576
                block group 0 mode 121644 links 1 uid 0 gid 0 rdev 0
                sequence 9 flags 0x0(none)

This mode number 0120000 means it's a symlink.

But the dir item think it's still a regular file:

        item 8 key (264 DIR_INDEX 5) itemoff 3707 itemsize 32
                location key (268 INODE_ITEM 0) type FILE
                transid 13 data_len 0 name_len 2
                name: f4
        item 40 key (264 DIR_ITEM 51821248) itemoff 1573 itemsize 32
                location key (268 INODE_ITEM 0) type FILE
                transid 13 data_len 0 name_len 2
                name: f4

For symlink, we don't set BTRFS_I(inode)->io_tree.ops and leave it
empty, as symlink is only designed to have inlined extent, all handled
by tree block read.  Thus no need to trigger btrfs_submit_bio_hook() for
inline file extent.

However end_bio_extent_readpage() expects tree->ops populated, as it's
reading regular data extent.  This causes NULL pointer dereference.

[FIX]
This patch fixes the problem in two ways:

- Verify inode mode against its dir item when looking up inode
  So in btrfs_lookup_dentry() if we find inode mode mismatch with dir
  item, we error out so that corrupted inode will not be accessed.

- Verify inode mode when getting extent mapping
  Only regular file should have regular or preallocated extent.
  If we found regular/preallocated file extent for symlink or
  the rest, we error out before submitting the read bio.

With this fix that crafted image can be rejected gracefully:

  BTRFS critical (device loop0): inode mode mismatch with dir: inode mode=0121644 btrfs type=7 dir type=1

Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202763
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[sudip: use original btrfs_inode_type()]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: adjust return values of btrfs_inode_by_name

commit 005d67127fa9dfb3382f2c9e918feed7a243a7fe upstream

Previously, btrfs_inode_by_name() returned 0 which left caller to check
objectid of location even location if the type was invalid.

Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a
dir entry is found.  Removal of label out_err also simplifies the
function.

Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ drop unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: tree-checker: Enhance chunk checker to validate chunk profile

commit 80e46cf22ba0bcb57b39c7c3b52961ab3a0fd5f2 upstream

Btrfs-progs already have a comprehensive type checker, to ensure there
is only 0 (SINGLE profile) or 1 (DUP/RAID0/1/5/6/10) bit set for chunk
profile bits.

Do the same work for kernel.

Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202765
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[sudip: manually backport and use btrfs_err instead of chunk_err]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add device even if driver attach failed

commit 2194bc7c39610be7cabe7456c5f63a570604f015 upstream.

device_attach() returning failure indicates a driver error while trying to
probe the device. In such a scenario, the PCI device should still be added
in the system and be visible to the user.

When device_attach() fails, merely warn about it and keep the PCI device in
the system.

This partially reverts ab1a187bba5c ("PCI: Check device_attach() return
value always").

Link: https://lore.kernel.org/r/20200706233240.3245512-1-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org # v4.6+
[sudip: use dev_warn]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wireless: Use linux/stddef.h instead of stddef.h

commit 1b9ae0c92925ac40489be526d67d0010d0724ce0 upstream.

When compiling inside the kernel include linux/stddef.h instead of
stddef.h. When I compile this header file in backports for power PC I
run into a conflict with ptrdiff_t. I was unable to reproduce this in
mainline kernel. I still would like to fix this problem in the kernel.

Fixes: 6989310f5d43 ("wireless: Use offsetof instead of custom macro.")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20200521201422.16493-1-hauke@hauke-m.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix lockdep splat when reading qgroup config on mount

commit 3d05cad3c357a2b749912914356072b38435edfa upstream.

Lockdep reported the following splat when running test btrfs/190 from
fstests:

  [ 9482.126098] ======================================================
  [ 9482.126184] WARNING: possible circular locking dependency detected
  [ 9482.126281] 5.10.0-rc4-btrfs-next-73 #1 Not tainted
  [ 9482.126365] ------------------------------------------------------
  [ 9482.126456] mount/24187 is trying to acquire lock:
  [ 9482.126534] ffffa0c869a7dac0 (&fs_info->qgroup_rescan_lock){+.+.}-{3:3}, at: qgroup_rescan_init+0x43/0xf0 [btrfs]
  [ 9482.126647]
 but task is already holding lock:
  [ 9482.126777] ffffa0c892ebd3a0 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x120 [btrfs]
  [ 9482.126886]
 which lock already depends on the new lock.

  [ 9482.127078]
 the existing dependency chain (in reverse order) is:
  [ 9482.127213]
 -> #1 (btrfs-quota-00){++++}-{3:3}:
  [ 9482.127366]        lock_acquire+0xd8/0x490
  [ 9482.127436]        down_read_nested+0x45/0x220
  [ 9482.127528]        __btrfs_tree_read_lock+0x27/0x120 [btrfs]
  [ 9482.127613]        btrfs_read_lock_root_node+0x41/0x130 [btrfs]
  [ 9482.127702]        btrfs_search_slot+0x514/0xc30 [btrfs]
  [ 9482.127788]        update_qgroup_status_item+0x72/0x140 [btrfs]
  [ 9482.127877]        btrfs_qgroup_rescan_worker+0xde/0x680 [btrfs]
  [ 9482.127964]        btrfs_work_helper+0xf1/0x600 [btrfs]
  [ 9482.128039]        process_one_work+0x24e/0x5e0
  [ 9482.128110]        worker_thread+0x50/0x3b0
  [ 9482.128181]        kthread+0x153/0x170
  [ 9482.128256]        ret_from_fork+0x22/0x30
  [ 9482.128327]
 -> #0 (&fs_info->qgroup_rescan_lock){+.+.}-{3:3}:
  [ 9482.128464]        check_prev_add+0x91/0xc60
  [ 9482.128551]        __lock_acquire+0x1740/0x3110
  [ 9482.128623]        lock_acquire+0xd8/0x490
  [ 9482.130029]        __mutex_lock+0xa3/0xb30
  [ 9482.130590]        qgroup_rescan_init+0x43/0xf0 [btrfs]
  [ 9482.131577]        btrfs_read_qgroup_config+0x43a/0x550 [btrfs]
  [ 9482.132175]        open_ctree+0x1228/0x18a0 [btrfs]
  [ 9482.132756]        btrfs_mount_root.cold+0x13/0xed [btrfs]
  [ 9482.133325]        legacy_get_tree+0x30/0x60
  [ 9482.133866]        vfs_get_tree+0x28/0xe0
  [ 9482.134392]        fc_mount+0xe/0x40
  [ 9482.134908]        vfs_kern_mount.part.0+0x71/0x90
  [ 9482.135428]        btrfs_mount+0x13b/0x3e0 [btrfs]
  [ 9482.135942]        legacy_get_tree+0x30/0x60
  [ 9482.136444]        vfs_get_tree+0x28/0xe0
  [ 9482.136949]        path_mount+0x2d7/0xa70
  [ 9482.137438]        do_mount+0x75/0x90
  [ 9482.137923]        __x64_sys_mount+0x8e/0xd0
  [ 9482.138400]        do_syscall_64+0x33/0x80
  [ 9482.138873]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [ 9482.139346]
 other info that might help us debug this:

  [ 9482.140735]  Possible unsafe locking scenario:

  [ 9482.141594]        CPU0                    CPU1
  [ 9482.142011]        ----                    ----
  [ 9482.142411]   lock(btrfs-quota-00);
  [ 9482.142806]                                lock(&fs_info->qgroup_rescan_lock);
  [ 9482.143216]                                lock(btrfs-quota-00);
  [ 9482.143629]   lock(&fs_info->qgroup_rescan_lock);
  [ 9482.144056]
  *** DEADLOCK ***

  [ 9482.145242] 2 locks held by mount/24187:
  [ 9482.145637]  #0: ffffa0c8411c40e8 (&type->s_umount_key#44/1){+.+.}-{3:3}, at: alloc_super+0xb9/0x400
  [ 9482.146061]  #1: ffffa0c892ebd3a0 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x120 [btrfs]
  [ 9482.146509]
 stack backtrace:
  [ 9482.147350] CPU: 1 PID: 24187 Comm: mount Not tainted 5.10.0-rc4-btrfs-next-73 #1
  [ 9482.147788] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  [ 9482.148709] Call Trace:
  [ 9482.149169]  dump_stack+0x8d/0xb5
  [ 9482.149628]  check_noncircular+0xff/0x110
  [ 9482.150090]  check_prev_add+0x91/0xc60
  [ 9482.150561]  ? kvm_clock_read+0x14/0x30
  [ 9482.151017]  ? kvm_sched_clock_read+0x5/0x10
  [ 9482.151470]  __lock_acquire+0x1740/0x3110
  [ 9482.151941]  ? __btrfs_tree_read_lock+0x27/0x120 [btrfs]
  [ 9482.152402]  lock_acquire+0xd8/0x490
  [ 9482.152887]  ? qgroup_rescan_init+0x43/0xf0 [btrfs]
  [ 9482.153354]  __mutex_lock+0xa3/0xb30
  [ 9482.153826]  ? qgroup_rescan_init+0x43/0xf0 [btrfs]
  [ 9482.154301]  ? qgroup_rescan_init+0x43/0xf0 [btrfs]
  [ 9482.154768]  ? qgroup_rescan_init+0x43/0xf0 [btrfs]
  [ 9482.155226]  qgroup_rescan_init+0x43/0xf0 [btrfs]
  [ 9482.155690]  btrfs_read_qgroup_config+0x43a/0x550 [btrfs]
  [ 9482.156160]  open_ctree+0x1228/0x18a0 [btrfs]
  [ 9482.156643]  btrfs_mount_root.cold+0x13/0xed [btrfs]
  [ 9482.157108]  ? rcu_read_lock_sched_held+0x5d/0x90
  [ 9482.157567]  ? kfree+0x31f/0x3e0
  [ 9482.158030]  legacy_get_tree+0x30/0x60
  [ 9482.158489]  vfs_get_tree+0x28/0xe0
  [ 9482.158947]  fc_mount+0xe/0x40
  [ 9482.159403]  vfs_kern_mount.part.0+0x71/0x90
  [ 9482.159875]  btrfs_mount+0x13b/0x3e0 [btrfs]
  [ 9482.160335]  ? rcu_read_lock_sched_held+0x5d/0x90
  [ 9482.160805]  ? kfree+0x31f/0x3e0
  [ 9482.161260]  ? legacy_get_tree+0x30/0x60
  [ 9482.161714]  legacy_get_tree+0x30/0x60
  [ 9482.162166]  vfs_get_tree+0x28/0xe0
  [ 9482.162616]  path_mount+0x2d7/0xa70
  [ 9482.163070]  do_mount+0x75/0x90
  [ 9482.163525]  __x64_sys_mount+0x8e/0xd0
  [ 9482.163986]  do_syscall_64+0x33/0x80
  [ 9482.164437]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [ 9482.164902] RIP: 0033:0x7f51e907caaa

This happens because at btrfs_read_qgroup_config() we can call
qgroup_rescan_init() while holding a read lock on a quota btree leaf,
acquired by the previous call to btrfs_search_slot_for_read(), and
qgroup_rescan_init() acquires the mutex qgroup_rescan_lock.

A qgroup rescan worker does the opposite: it acquires the mutex
qgroup_rescan_lock, at btrfs_qgroup_rescan_worker(), and then tries to
update the qgroup status item in the quota btree through the call to
update_qgroup_status_item(). This inversion of locking order
between the qgroup_rescan_lock mutex and quota btree locks causes the
splat.

Fix this simply by releasing and freeing the path before calling
qgroup_rescan_init() at btrfs_read_qgroup_config().

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()

commit bfe8cc1db02ab243c62780f17fc57f65bde0afe1 upstream.

Alexander reported a syzkaller / KASAN finding on s390, see below for
complete output.

In do_huge_pmd_anonymous_page(), the pre-allocated pagetable will be
freed in some cases.  In the case of userfaultfd_missing(), this will
happen after calling handle_userfault(), which might have released the
mmap_lock.  Therefore, the following pte_free(vma->vm_mm, pgtable) will
access an unstable vma->vm_mm, which could have been freed or re-used
already.

For all architectures other than s390 this will go w/o any negative
impact, because pte_free() simply frees the page and ignores the
passed-in mm.  The implementation for SPARC32 would also access
mm->page_table_lock for pte_free(), but there is no THP support in
SPARC32, so the buggy code path will not be used there.

For s390, the mm->context.pgtable_list is being used to maintain the 2K
pagetable fragments, and operating on an already freed or even re-used
mm could result in various more or less subtle bugs due to list /
pagetable corruption.

Fix this by calling pte_free() before handle_userfault(), similar to how
it is already done in __do_huge_pmd_anonymous_page() for the WRITE /
non-huge_zero_page case.

Commit 6b251fc96cf2c ("userfaultfd: call handle_userfault() for
userfaultfd_missing() faults") actually introduced both, the
do_huge_pmd_anonymous_page() and also __do_huge_pmd_anonymous_page()
changes wrt to calling handle_userfault(), but only in the latter case
it put the pte_free() before calling handle_userfault().

  BUG: KASAN: use-after-free in do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
  Read of size 8 at addr 00000000962d6988 by task syz-executor.0/9334

  CPU: 1 PID: 9334 Comm: syz-executor.0 Not tainted 5.10.0-rc1-syzkaller-07083-g4c9720875573 #0
  Hardware name: IBM 3906 M04 701 (KVM/Linux)
  Call Trace:
    do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
    create_huge_pmd mm/memory.c:4256 [inline]
    __handle_mm_fault+0xe6e/0x1068 mm/memory.c:4480
    handle_mm_fault+0x288/0x748 mm/memory.c:4607
    do_exception+0x394/0xae0 arch/s390/mm/fault.c:479
    do_dat_exception+0x34/0x80 arch/s390/mm/fault.c:567
    pgm_check_handler+0x1da/0x22c arch/s390/kernel/entry.S:706
    copy_from_user_mvcos arch/s390/lib/uaccess.c:111 [inline]
    raw_copy_from_user+0x3a/0x88 arch/s390/lib/uaccess.c:174
    _copy_from_user+0x48/0xa8 lib/usercopy.c:16
    copy_from_user include/linux/uaccess.h:192 [inline]
    __do_sys_sigaltstack kernel/signal.c:4064 [inline]
    __s390x_sys_sigaltstack+0xc8/0x240 kernel/signal.c:4060
    system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

  Allocated by task 9334:
    slab_alloc_node mm/slub.c:2891 [inline]
    slab_alloc mm/slub.c:2899 [inline]
    kmem_cache_alloc+0x118/0x348 mm/slub.c:2904
    vm_area_dup+0x9c/0x2b8 kernel/fork.c:356
    __split_vma+0xba/0x560 mm/mmap.c:2742
    split_vma+0xca/0x108 mm/mmap.c:2800
    mlock_fixup+0x4ae/0x600 mm/mlock.c:550
    apply_vma_lock_flags+0x2c6/0x398 mm/mlock.c:619
    do_mlock+0x1aa/0x718 mm/mlock.c:711
    __do_sys_mlock2 mm/mlock.c:738 [inline]
    __s390x_sys_mlock2+0x86/0xa8 mm/mlock.c:728
    system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

  Freed by task 9333:
    slab_free mm/slub.c:3142 [inline]
    kmem_cache_free+0x7c/0x4b8 mm/slub.c:3158
    __vma_adjust+0x7b2/0x2508 mm/mmap.c:960
    vma_merge+0x87e/0xce0 mm/mmap.c:1209
    userfaultfd_release+0x412/0x6b8 fs/userfaultfd.c:868
    __fput+0x22c/0x7a8 fs/file_table.c:281
    task_work_run+0x200/0x320 kernel/task_work.c:151
    tracehook_notify_resume include/linux/tracehook.h:188 [inline]
    do_notify_resume+0x100/0x148 arch/s390/kernel/signal.c:538
    system_call+0xe6/0x28c arch/s390/kernel/entry.S:416

  The buggy address belongs to the object at 00000000962d6948 which belongs to the cache vm_area_struct of size 200
  The buggy address is located 64 bytes inside of 200-byte region [00000000962d6948, 00000000962d6a10)
  The buggy address belongs to the page: page:00000000313a09fe refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x962d6 flags: 0x3ffff00000000200(slab)
  raw: 3ffff00000000200 000040000257e080 0000000c0000000c 000000008020ba00
  raw: 0000000000000000 000f001e00000000 ffffffff00000001 0000000096959501
  page dumped because: kasan: bad access detected
  page->mem_cgroup:0000000096959501

  Memory state around the buggy address:
   00000000962d6880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00000000962d6900: 00 fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb
  >00000000962d6980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                        ^
   00000000962d6a00: fb fb fc fc fc fc fc fc fc fc 00 00 00 00 00 00
   00000000962d6a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ==================================================================

Changes for v4.14 stable:
  - Make it apply w/o
    * Commit 4cf58924951ef ("mm: treewide: remove unused address argument
      from pte_alloc functions")
    * Commit 2b7403035459c ("mm: Change return type int to vm_fault_t for
      fault handlers")

Fixes: 6b251fc96cf2c ("userfaultfd: call handle_userfault() for userfaultfd_missing() faults")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org> [4.3+]
Link: https://lkml.kernel.org/r/20201110190329.11920-1-gerald.schaefer@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf event: Check ref_reloc_sym before using it

commit e9a6882f267a8105461066e3ea6b4b6b9be1b807 upstream.

Check for ref_reloc_sym before using it instead of checking
symbol_conf.kptr_restrict and relying solely on that check.

Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1566869956-7154-2-git-send-email-ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 4.14.209 into android-4.14-q

Changes in 4.14.209
ah6: fix error return code in ah6_input()
atm: nicstar: Unmap DMA on send error
bnxt_en: read EEPROM A2h address using page 0
devlink: Add missing genlmsg_cancel() in devlink_nl_sb_port_pool_fill()
inet_diag: Fix error path to cancel the meseage in inet_req_diag_fill()
mlxsw: core: Use variable timeout for EMAD retries
net: b44: fix error return code in b44_init_one()
net: bridge: add missing counters to ndo_get_stats64 callback
net: dsa: mv88e6xxx: Avoid VTU corruption on 6097
net: Have netpoll bring-up DSA management interface
netlabel: fix our progress tracking in netlbl_unlabel_staticlist()
netlabel: fix an uninitialized warning in netlbl_unlabel_staticlist()
net/mlx4_core: Fix init_hca fields offset
net: x25: Increase refcnt of "struct x25_neigh" in x25_rx_call_request
qlcnic: fix error return code in qlcnic_83xx_restart_hw()
sctp: change to hold/put transport for proto_unreach_timer
net/mlx5: Disable QoS when min_rates on all VFs are zero
net: usb: qmi_wwan: Set DTR quirk for MR400
tcp: only postpone PROBE_RTT if RTT is < current min_rtt estimate
net: ftgmac100: Fix crash when removing driver
pinctrl: rockchip: enable gpio pclk for rockchip_gpio_to_irq
arm64: psci: Avoid printing in cpu_psci_cpu_die()
vfs: remove lockdep bogosity in __sb_start_write
Input: adxl34x - clean up a data type in adxl34x_probe()
MIPS: export has_transparent_hugepage() for modules
arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy
ARM: dts: imx50-evk: Fix the chip select 1 IOMUX
perf lock: Don't free "lock_seq_stat" if read_count isn't zero
can: af_can: prevent potential access of uninitialized member in can_rcv()
can: af_can: prevent potential access of uninitialized member in canfd_rcv()
can: dev: can_restart(): post buffer from the right context
can: ti_hecc: Fix memleak in ti_hecc_probe
can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb()
can: peak_usb: fix potential integer overflow on shift of a int
can: m_can: m_can_handle_state_change(): fix state change
ASoC: qcom: lpass-platform: Fix memory leak
MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu
regulator: ti-abb: Fix array out of bound read access on the first transition
xfs: revert "xfs: fix rmap key and record comparison functions"
libfs: fix error cast of negative value in simple_attr_write()
powerpc/uaccess-flush: fix missing includes in kup-radix.h
speakup: Do not let the line discipline be used several times
ALSA: ctl: fix error path at adding user-defined element set
ALSA: mixart: Fix mutex deadlock
tty: serial: imx: keep console clocks always on
efivarfs: fix memory leak in efivarfs_create()
staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
ext4: fix bogus warning in ext4_update_dx_flag()
iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
regulator: fix memory leak with repeated set_machine_constraints()
regulator: avoid resolve_supply() infinite recursion
regulator: workaround self-referent regulators
xtensa: disable preemption around cache alias management calls
mac80211: minstrel: remove deferred sampling code
mac80211: minstrel: fix tx status processing corner case
mac80211: free sta in sta_info_insert_finish() on errors
s390/cpum_sf.c: fix file permission for cpum_sfb_size
s390/dasd: fix null pointer dereference for ERP requests
x86/microcode/intel: Check patch signature before saving microcode for early loading
Linux 4.14.209

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ib49bcaf38d60c04165946794ee266c438b21408c

Linux 4.14.209

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20201123121805.028396732@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/intel: Check patch signature before saving microcode for early loading

commit 1a371e67dc77125736cc56d3a0893f06b75855b6 upstream.

Currently, scan_microcode() leverages microcode_matches() to check
if the microcode matches the CPU by comparing the family and model.
However, the processor stepping and flags of the microcode signature
should also be considered when saving a microcode patch for early
update.

Use find_matching_signature() in scan_microcode() and get rid of the
now-unused microcode_matches() which is a good cleanup in itself.

Complete the verification of the patch being saved for early loading in
save_microcode_patch() directly. This needs to be done there too because
save_mc_for_early() will call save_microcode_patch() too.

The second reason why this needs to be done is because the loader still
tries to support, at least hypothetically, mixed-steppings systems and
thus adds all patches to the cache that belong to the same CPU model
albeit with different steppings.

For example:

  microcode: CPU: sig=0x906ec, pf=0x2, rev=0xd6
  microcode: mc_saved[0]: sig=0x906e9, pf=0x2a, rev=0xd6, total size=0x19400, date = 2020-04-23
  microcode: mc_saved[1]: sig=0x906ea, pf=0x22, rev=0xd6, total size=0x19000, date = 2020-04-27
  microcode: mc_saved[2]: sig=0x906eb, pf=0x2, rev=0xd6, total size=0x19400, date = 2020-04-23
  microcode: mc_saved[3]: sig=0x906ec, pf=0x22, rev=0xd6, total size=0x19000, date = 2020-04-27
  microcode: mc_saved[4]: sig=0x906ed, pf=0x22, rev=0xd6, total size=0x19400, date = 2020-04-23

The patch which is being saved for early loading, however, can only be
the one which fits the CPU this runs on so do the signature verification
before saving.

 [ bp: Do signature verification in save_microcode_patch()
       and rewrite commit message. ]

Fixes: ec400ddeff20 ("x86/microcode_intel_early.c: Early update ucode on Intel's CPU")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208535
Link: https://lkml.kernel.org/r/20201113015923.13960-1-yu.c.chen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix null pointer dereference for ERP requests

commit 6f117cb854a44a79898d844e6ae3fd23bd94e786 upstream.

When requeueing all requests on the device request queue to the blocklayer
we might get to an ERP (error recovery) request that is a copy of an
original CQR.

Those requests do not have blocklayer request information or a pointer to
the dasd_queue set. When trying to access those data it will lead to a
null pointer dereference in dasd_requeue_all_requests().

Fix by checking if the request is an ERP request that can simply be
ignored. The blocklayer request will be requeued by the original CQR that
is on the device queue right behind the ERP request.

Fixes: 9487cfd3430d ("s390/dasd: fix handling of internal requests")
Cc: <stable@vger.kernel.org> #4.16
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cpum_sf.c: fix file permission for cpum_sfb_size

commit 78d732e1f326f74f240d416af9484928303d9951 upstream.

This file is installed by the s390 CPU Measurement sampling
facility device driver to export supported minimum and
maximum sample buffer sizes.
This file is read by lscpumf tool to display the details
of the device driver capabilities. The lscpumf tool might
be invoked by a non-root user. In this case it does not
print anything because the file contents can not be read.

Fix this by allowing read access for all users. Reading
the file contents is ok, changing the file contents is
left to the root user only.

For further reference and details see:
 [1] https://github.com/ibm-s390-tools/s390-tools/issues/97

Fixes: 69f239ed335a ("s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur")
Cc: <stable@vger.kernel.org> # 3.14
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: free sta in sta_info_insert_finish() on errors

commit 7bc40aedf24d31d8bea80e1161e996ef4299fb10 upstream.

If sta_info_insert_finish() fails, we currently keep the station
around and free it only in the caller, but there's only one such
caller and it always frees it immediately.

As syzbot found, another consequence of this split is that we can
put things that sleep only into __cleanup_single_sta() and not in
sta_info_free(), but this is the only place that requires such of
sta_info_free() now.

Change this to free the station in sta_info_insert_finish(), in
which case we can still sleep. This will also let us unify the
cleanup code later.

Cc: stable@vger.kernel.org
Fixes: dcd479e10a05 ("mac80211: always wind down STA state")
Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com
Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com
Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com
Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com
Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com
Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: minstrel: fix tx status processing corner case

commit b2911a84396f72149dce310a3b64d8948212c1b3 upstream.

Some drivers fill the status rate list without setting the rate index after
the final rate to -1. minstrel_ht already deals with this, but minstrel
doesn't, which causes it to get stuck at the lowest rate on these drivers.

Fix this by checking the count as well.

Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: minstrel: remove deferred sampling code

commit 4fe40b8e1566dad04c87fbf299049a1d0d4bd58d upstream.

Deferring sampling attempts to the second stage has some bad interactions
with drivers that process the rate table in hardware and use the probe flag
to indicate probing packets (e.g. most mt76 drivers). On affected drivers
it can lead to probing not working at all.

If the link conditions turn worse, it might not be such a good idea to
do a lot of sampling for lower rates in this case.

Fix this by simply skipping the sample attempt instead of deferring it,
but keep the checks that would allow it to be sampled if it was skipped
too often, but only if it has less than 95% success probability.

Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing
packets.

Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: disable preemption around cache alias management calls

commit 3a860d165eb5f4d7cf0bf81ef6a5b5c5e1754422 upstream.

Although cache alias management calls set up and tear down TLB entries
and fast_second_level_miss is able to restore TLB entry should it be
evicted they absolutely cannot preempt each other because they use the
same TLBTEMP area for different purposes.
Disable preemption around all cache alias management calls to enforce
that.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: workaround self-referent regulators

commit f5c042b23f7429e5c2ac987b01a31c69059a978b upstream.

Workaround regulators whose supply name happens to be the same as its
own name. This fixes boards that used to work before the early supply
resolving was removed. The error message is left in place so that
offending drivers can be detected.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Cc: stable@vger.kernel.org
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1
Link: https://lore.kernel.org/r/d703acde2a93100c3c7a81059d716c50ad1b1f52.1605226675.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: avoid resolve_supply() infinite recursion

commit 4b639e254d3d4f15ee4ff2b890a447204cfbeea9 upstream.

When a regulator's name equals its supply's name the
regulator_resolve_supply() recurses indefinitely. Add a check
so that debugging the problem is easier. The "fixed" commit
just exposed the problem.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Cc: stable@vger.kernel.org
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1
Link: https://lore.kernel.org/r/c6171057cfc0896f950c4d8cb82df0f9f1b89ad9.1605226675.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: fix memory leak with repeated set_machine_constraints()

commit 57a6ad482af256b2a13de14194fb8f67c1a65f10 upstream.

Fixed commit introduced a possible second call to
set_machine_constraints() and that allocates memory for
rdev->constraints. Move the allocation to the caller so
it's easier to manage and done once.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Cc: stable@vger.kernel.org
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1
Link: https://lore.kernel.org/r/78c3d4016cebc08d441aad18cb924b4e4d9cf9df.1605226675.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode

commit e5b1032a656e9aa4c7a4df77cb9156a2a651a5f9 upstream.

Some 360 degree hinges (yoga) style 2-in-1 devices use 2 KXCJ91008-s
to allow the OS to determine the angle between the display and the base
of the device, so that the OS can determine if the 2-in-1 is in laptop
or in tablet-mode.

On Windows both accelerometers are read by a special HingeAngleService
process; and this process calls a DSM (Device Specific Method) on the
ACPI KIOX010A device node for the sensor in the display, to let the
embedded-controller (EC) know about the mode so that it can disable the
kbd and touchpad to avoid spurious input while folded into tablet-mode.

This notifying of the EC is problematic because sometimes the EC comes up
thinking that device is in tablet-mode and the kbd and touchpad do not
work. This happens for example on Irbis NB111 devices after a suspend /
resume cycle (after a complete battery drain / hard reset without having
booted Windows at least once). Other 2-in-1s which are likely affected
too are e.g. the Teclast F5 and F6 series.

The kxcjk-1013 driver may seem like a strange place to deal with this,
but since it is *the* driver for the ACPI KIOX010A device, it is also
the driver which has access to the ACPI handle needed by the DSM.

Add support for calling the DSM and on probe unconditionally tell the
EC that the device is laptop mode, fixing the kbd and touchpad sometimes
not working.

Fixes: 7f6232e69539 ("iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID")
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201110133835.129080-3-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum

commit 11e94f28c3de35d5ad1ac6a242a5b30f4378991a upstream.

Replace the boolean is_smo8500_device variable with an acpi_type enum.

For now this can be either ACPI_GENERIC or ACPI_SMO8500, this is a
preparation patch for adding special handling for the KIOX010A ACPI HID,
which will add a ACPI_KIOX010A acpi_type to the introduced enum.

For stable as needed as precursor for next patch.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 7f6232e69539 ("iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID")
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201110133835.129080-2-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix bogus warning in ext4_update_dx_flag()

commit f902b216501094495ff75834035656e8119c537f upstream.

The idea of the warning in ext4_update_dx_flag() is that we should warn
when we are clearing EXT4_INODE_INDEX on a filesystem with metadata
checksums enabled since after clearing the flag, checksums for internal
htree nodes will become invalid. So there's no need to warn (or actually
do anything) when EXT4_INODE_INDEX is not set.

Link: https://lore.kernel.org/r/20201118153032.17281-1-jack@suse.cz
Fixes: 48a34311953d ("ext4: fix checksum errors with indexed dirs")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids

commit aee9dccc5b64e878cf1b18207436e73f66d74157 upstream.

Add 024c:0627 to the list of SDIO device-ids, based on hardware found in
the wild. This hardware exists on at least some Acer SW1-011 tablets.

Signed-off-by: Brian O'Keefe <bokeefe@alum.wpi.edu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/b9e1523f-2ba7-fb82-646a-37f095b4440e@alum.wpi.edu
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efivarfs: fix memory leak in efivarfs_create()

commit fe5186cf12e30facfe261e9be6c7904a170bd822 upstream.

kmemleak report:
  unreferenced object 0xffff9b8915fcb000 (size 4096):
  comm "efivarfs.sh", pid 2360, jiffies 4294920096 (age 48.264s)
  hex dump (first 32 bytes):
    2d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  -...............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000cc4d897c>] kmem_cache_alloc_trace+0x155/0x4b0
    [<000000007d1dfa72>] efivarfs_create+0x6e/0x1a0
    [<00000000e6ee18fc>] path_openat+0xe4b/0x1120
    [<000000000ad0414f>] do_filp_open+0x91/0x100
    [<00000000ce93a198>] do_sys_openat2+0x20c/0x2d0
    [<000000002a91be6d>] do_sys_open+0x46/0x80
    [<000000000a854999>] __x64_sys_openat+0x20/0x30
    [<00000000c50d89c9>] do_syscall_64+0x38/0x90
    [<00000000cecd6b5f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

In efivarfs_create(), inode->i_private is setup with efivar_entry
object which is never freed.

Cc: <stable@vger.kernel.org>
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Link: https://lore.kernel.org/r/20201023115429.GA2479@cosmos
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: imx: keep console clocks always on

commit e67c139c488e84e7eae6c333231e791f0e89b3fb upstream.

For below code, there has chance to cause deadlock in SMP system:
Thread 1:
clk_enable_lock();
pr_info("debug message");
clk_enable_unlock();

Thread 2:
imx_uart_console_write()
clk_enable()
clk_enable_lock();

Thread 1:
Acuired clk enable_lock -> printk -> console_trylock_spinning
Thread 2:
console_unlock() -> imx_uart_console_write -> clk_disable -> Acquite clk enable_lock

So the patch is to keep console port clocks always on like
other console drivers.

Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check")
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Link: https://lore.kernel.org/r/20201111025136.29818-1-fugang.duan@nxp.com
Cc: stable <stable@vger.kernel.org>
[fix up build warning - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: mixart: Fix mutex deadlock

commit d21b96c8ed2aea7e6b7bf4735e1d2503cfbf4072 upstream.

The code change for switching to non-atomic mode brought the
unexpected mutex deadlock in get_msg().  It converted the spinlock
with the existing mutex, but there were calls with the already holding
the mutex.  Since the only place that needs the extra lock is the code
path from snd_mixart_send_msg(), remove the mutex lock in get_msg()
and apply in the caller side for fixing the mutex deadlock.

Fixes: 8d3a8b5cb57d ("ALSA: mixart: Use nonatomic PCM ops")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201119121440.18945-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ctl: fix error path at adding user-defined element set

commit 95a793c3bc75cf888e0e641d656e7d080f487d8b upstream.

When processing request to add/replace user-defined element set, check
of given element identifier and decision of numeric identifier is done
in "__snd_ctl_add_replace()" helper function. When the result of check
is wrong, the helper function returns error code. The error code shall
be returned to userspace application.

Current implementation includes bug to return zero to userspace application
regardless of the result. This commit fixes the bug.

Cc: <stable@vger.kernel.org>
Fixes: e1a7bfe38079 ("ALSA: control: Fix race between adding and removing a user element")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20201113092043.16148-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup: Do not let the line discipline be used several times

commit d4122754442799187d5d537a9c039a49a67e57f1 upstream.

Speakup has only one speakup_tty variable to store the tty it is managing. This
makes sense since its codebase currently assumes that there is only one user who
controls the screen reading.

That however means that we have to forbid using the line discipline several
times, otherwise the second closure would try to free a NULL ldisc_data, leading to

general protection fault: 0000 [#1] SMP KASAN PTI
RIP: 0010:spk_ttyio_ldisc_close+0x2c/0x60
Call Trace:
 tty_ldisc_release+0xa2/0x340
 tty_release_struct+0x17/0xd0
 tty_release+0x9d9/0xcc0
 __fput+0x231/0x740
 task_work_run+0x12c/0x1a0
 do_exit+0x9b5/0x2230
 ? release_task+0x1240/0x1240
 ? __do_page_fault+0x562/0xa30
 do_group_exit+0xd5/0x2a0
 __x64_sys_exit_group+0x35/0x40
 do_syscall_64+0x89/0x2b0
 ? page_fault+0x8/0x30
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Cc: stable@vger.kernel.org
Reported-by: 秦世松 <qinshisong1205@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Shisong Qin <qinshisong1205@gmail.com>
Link: https://lore.kernel.org/r/20201110183541.fzgnlwhjpgqzjeth@function
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/uaccess-flush: fix missing includes in kup-radix.h

Guenter reports a build failure on cell_defconfig and maple_defconfg:

In file included from arch/powerpc/include/asm/kup.h:10:0,
 from arch/powerpc/include/asm/uaccess.h:12,
 from arch/powerpc/lib/checksum_wrappers.c:24:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
 DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
 ^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
  if (static_branch_unlikely(&uaccess_flush_key))
      ^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean
‘do_uaccess_flush’?
  if (static_branch_unlikely(&uaccess_flush_key))
      ^~~~~~~~~~~~~~~~~
      do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors

This is because I failed to include linux/jump_label.h in kup-radix.h. Include it.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libfs: fix error cast of negative value in simple_attr_write()

[ Upstream commit 488dac0c9237647e9b8f788b6a342595bfa40bda ]

The attr->set() receive a value of u64, but simple_strtoll() is used for
doing the conversion.  It will lead to the error cast if user inputs a
negative value.

Use kstrtoull() instead of simple_strtoll() to convert a string got from
the user to an unsigned value.  The former will return '-EINVAL' if it
gets a negetive value, but the latter can't handle the situation
correctly.  Make 'val' unsigned long long as what kstrtoull() takes,
this will eliminate the compile warning on no 64-bit architectures.

Fixes: f7b88631a897 ("fs/libfs.c: fix simple_attr_write() on 32bit machines")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/1605341356-11872-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: revert "xfs: fix rmap key and record comparison functions"

[ Upstream commit eb8409071a1d47e3593cfe077107ac46853182ab ]

This reverts commit 6ff646b2ceb0eec916101877f38da0b73e3a5b7f.

Your maintainer committed a major braino in the rmap code by adding the
attr fork, bmbt, and unwritten extent usage bits into rmap record key
comparisons.  While XFS uses the usage bits *in the rmap records* for
cross-referencing metadata in xfs_scrub and xfs_repair, it only needs
the owner and offset information to distinguish between reverse mappings
of the same physical extent into the data fork of a file at multiple
offsets.  The other bits are not important for key comparisons for index
lookups, and never have been.

Eric Sandeen reports that this causes regressions in generic/299, so
undo this patch before it does more damage.

Reported-by: Eric Sandeen <sandeen@sandeen.net>
Fixes: 6ff646b2ceb0 ("xfs: fix rmap key and record comparison functions")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: ti-abb: Fix array out of bound read access on the first transition

[ Upstream commit 2ba546ebe0ce2af47833d8912ced9b4a579f13cb ]

At the start of driver initialization, we do not know what bias
setting the bootloader has configured the system for and we only know
for certain the very first time we do a transition.

However, since the initial value of the comparison index is -EINVAL,
this negative value results in an array out of bound access on the
very first transition.

Since we don't know what the setting is, we just set the bias
configuration as there is nothing to compare against. This prevents
the array out of bound access.

NOTE: Even though we could use a more relaxed check of "< 0" the only
valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+.

Fixes: 40b1936efebd ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver")
Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20201118145009.10492-1-nm@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>