Josh Poimboeuf [Fri, 25 Feb 2022 22:32:28 +0000 (14:32 -0800)]
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
commit
0de05d056afdb00eca8c7bbb0c79a3438daf700c upstream.
The commit
44a3918c8245 ("x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting")
added a warning for the "eIBRS + unprivileged eBPF" combination, which
has been shown to be vulnerable against Spectre v2 BHB-based attacks.
However, there's no warning about the "eIBRS + LFENCE retpoline +
unprivileged eBPF" combo. The LFENCE adds more protection by shortening
the speculation window after a mispredicted branch. That makes an attack
significantly more difficult, even with unprivileged eBPF. So at least
for now the logic doesn't warn about that combination.
But if you then add SMT into the mix, the SMT attack angle weakens the
effectiveness of the LFENCE considerably.
So extend the "eIBRS + unprivileged eBPF" warning to also include the
"eIBRS + LFENCE + unprivileged eBPF + SMT" case.
[ bp: Massage commit message. ]
Suggested-by: Alyssa Milburn <alyssa.milburn@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Fri, 25 Feb 2022 22:31:49 +0000 (14:31 -0800)]
x86/speculation: Warn about Spectre v2 LFENCE mitigation
commit
eafd987d4a82c7bb5aa12f0e3b4f8f3dea93e678 upstream.
With:
f8a66d608a3e ("x86,bugs: Unconditionally allow spectre_v2=retpoline,amd")
it became possible to enable the LFENCE "retpoline" on Intel. However,
Intel doesn't recommend it, as it has some weaknesses compared to
retpoline.
Now AMD doesn't recommend it either.
It can still be left available as a cmdline option. It's faster than
retpoline but is weaker in certain scenarios -- particularly SMT, but
even non-SMT may be vulnerable in some cases.
So just unconditionally warn if the user requests it on the cmdline.
[ bp: Massage commit message. ]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim Phillips [Mon, 28 Feb 2022 17:23:16 +0000 (11:23 -0600)]
x86/speculation: Update link to AMD speculation whitepaper
commit
e9b6013a7ce31535b04b02ba99babefe8a8599fa upstream.
Update the link to the "Software Techniques for Managing Speculation
on AMD Processors" whitepaper.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
[bwh: Backported to 4.9: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim Phillips [Mon, 28 Feb 2022 17:23:15 +0000 (11:23 -0600)]
x86/speculation: Use generic retpoline by default on AMD
commit
244d00b5dd4755f8df892c86cab35fb2cfd4f14b upstream.
AMD retpoline may be susceptible to speculation. The speculation
execution window for an incorrect indirect branch prediction using
LFENCE/JMP sequence may potentially be large enough to allow
exploitation using Spectre V2.
By default, don't use retpoline,lfence on AMD. Instead, use the
generic retpoline.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Fri, 18 Feb 2022 19:49:08 +0000 (11:49 -0800)]
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
commit
44a3918c8245ab10c6c9719dd12e7a8d291980d8 upstream.
With unprivileged eBPF enabled, eIBRS (without retpoline) is vulnerable
to Spectre v2 BHB-based attacks.
When both are enabled, print a warning message and report it in the
'spectre_v2' sysfs vulnerabilities file.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[fllinden@amazon.com: backported to 4.19]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 16 Feb 2022 19:57:02 +0000 (20:57 +0100)]
Documentation/hw-vuln: Update spectre doc
commit
5ad3eb1132453b9795ce5fd4572b1c18b292cca9 upstream.
Update the doc with the new fun.
[ bp: Massage commit message. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[fllinden@amazon.com: backported to 4.19]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
[bwh: Backported to 4.9: adjust filenames]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 16 Feb 2022 19:57:01 +0000 (20:57 +0100)]
x86/speculation: Add eIBRS + Retpoline options
commit
1e19da8522c81bf46b335f84137165741e0d82b7 upstream.
Thanks to the chaps at VUsec it is now clear that eIBRS is not
sufficient, therefore allow enabling of retpolines along with eIBRS.
Add spectre_v2=eibrs, spectre_v2=eibrs,lfence and
spectre_v2=eibrs,retpoline options to explicitly pick your preferred
means of mitigation.
Since there's new mitigations there's also user visible changes in
/sys/devices/system/cpu/vulnerabilities/spectre_v2 to reflect these
new mitigations.
[ bp: Massage commit message, trim error messages,
do more precise eIBRS mode checking. ]
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Patrick Colp <patrick.colp@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[fllinden@amazon.com: backported to 4.19 (no Hygon)]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra (Intel) [Wed, 16 Feb 2022 19:57:00 +0000 (20:57 +0100)]
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
commit
d45476d9832409371537013ebdd8dc1a7781f97a upstream.
The RETPOLINE_AMD name is unfortunate since it isn't necessarily
AMD only, in fact Hygon also uses it. Furthermore it will likely be
sufficient for some Intel processors. Therefore rename the thing to
RETPOLINE_LFENCE to better describe what it is.
Add the spectre_v2=retpoline,lfence option as an alias to
spectre_v2=retpoline,amd to preserve existing setups. However, the output
of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed.
[ bp: Fix typos, massage. ]
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[fllinden@amazon.com: backported to 4.19]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Tue, 26 Oct 2021 12:01:46 +0000 (14:01 +0200)]
x86,bugs: Unconditionally allow spectre_v2=retpoline,amd
commit
f8a66d608a3e471e1202778c2a36cbdc96bae73b upstream.
Currently Linux prevents usage of retpoline,amd on !AMD hardware, this
is unfriendly and gets in the way of testing. Remove this restriction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211026120310.487348118@infradead.org
[fllinden@amazon.com: backported to 4.19 (no Hygon in 4.19)]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Mon, 15 Jun 2020 06:51:25 +0000 (08:51 +0200)]
x86/speculation: Merge one test in spectre_v2_user_select_mitigation()
commit
a5ce9f2bb665d1d2b31f139a02dbaa2dfbb62fa6 upstream.
Merge the test whether the CPU supports STIBP into the test which
determines whether STIBP is required. Thus try to simplify what is
already an insane logic.
Remove a superfluous newline in a comment, while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Anthony Steinhauser <asteinhauser@google.com>
Link: https://lkml.kernel.org/r/20200615065806.GB14668@zn.tnic
[fllinden@amazon.com: fixed contextual conflict (comment) for 4.19]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Bulwahn [Thu, 30 Dec 2021 17:19:40 +0000 (18:19 +0100)]
Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
commit
82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream.
The config RANDOMIZE_SLAB does not exist, the authors probably intended to
refer to the config RANDOMIZE_BASE, which provides kernel address-space
randomization. They probably just confused SLAB with BASE (these two
four-letter words coincidentally share three common letters), as they also
point out the config SLAB_FREELIST_RANDOM as further randomization within
the same sentence.
Fix the reference of the config for kernel address-space randomization to
the config that provides that.
Fixes:
6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
[bwh: Backported to 4.9: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Sat, 3 Aug 2019 19:21:54 +0000 (21:21 +0200)]
Documentation: Add swapgs description to the Spectre v1 documentation
commit
4c92057661a3412f547ede95715641d7ee16ddac upstream.
Add documentation to the Spectre document about the new swapgs variant of
Spectre v1.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 4.9: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Chen [Thu, 20 Jun 2019 23:10:50 +0000 (16:10 -0700)]
Documentation: Add section about CPU vulnerabilities for Spectre
commit
6e88559470f581741bcd0f2794f9054814ac9740 upstream.
Add documentation for Spectre vulnerability and the mitigation mechanisms:
- Explain the problem and risks
- Document the mitigation mechanisms
- Document the command line controls
- Document the sysfs files
Co-developed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
[bwh: Backported to 4.9:
- Drop chnages in spec_ctrl.rst, which is a plain-text document here
- Adjust filenames and references to spec_ctrl.rst]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenzhong Duan [Fri, 2 Nov 2018 08:45:41 +0000 (01:45 -0700)]
x86/retpoline: Remove minimal retpoline support
commit
ef014aae8f1cd2793e4e014bbb102bed53f852b7 upstream.
Now that CONFIG_RETPOLINE hard depends on compiler support, there is no
reason to keep the minimal retpoline support around which only provided
basic protection in the assembly files.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <srinivas.eeda@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/f06f0a89-5587-45db-8ed2-0a9d6638d5c0@default
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenzhong Duan [Fri, 2 Nov 2018 08:45:41 +0000 (01:45 -0700)]
x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support
commit
4cd24de3a0980bf3100c9dcb08ef65ca7c31af48 upstream.
Since retpoline capable compilers are widely available, make
CONFIG_RETPOLINE hard depend on the compiler capability.
Break the build when CONFIG_RETPOLINE is enabled and the compiler does not
support it. Emit an error message in that case:
"arch/x86/Makefile:226: *** You are building kernel with non-retpoline
compiler, please update your compiler.. Stop."
[dwmw: Fail the build with non-retpoline compiler]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: <srinivas.eeda@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/cca0cb20-f9e2-4094-840b-fb0f8810cd34@default
[bwh: Backported to 4.9:
- Drop change to objtool options
- Adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenzhong Duan [Tue, 18 Sep 2018 14:45:00 +0000 (07:45 -0700)]
x86/speculation: Add RETPOLINE_AMD support to the inline asm CALL_NOSPEC variant
commit
0cbb76d6285794f30953bfa3ab831714b59dd700 upstream.
..so that they match their asm counterpart.
Add the missing ANNOTATE_NOSPEC_ALTERNATIVE in CALL_NOSPEC, while at it.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang YanQing <udknight@gmail.com>
Cc: dhaval.giani@oracle.com
Cc: srinivas.eeda@oracle.com
Link: http://lkml.kernel.org/r/c3975665-173e-4d70-8dee-06c926ac26ee@default
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 8 Mar 2022 18:00:59 +0000 (19:00 +0100)]
Linux 4.9.305
Link: https://lore.kernel.org/r/20220307091634.434478485@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huang Pei [Tue, 23 Nov 2021 11:07:48 +0000 (19:07 +0800)]
hamradio: fix macro redefine warning
commit
16517829f2e02f096fb5ea9083d160381127faf3 upstream.
MIPS/IA64 define END as assembly function ending, which conflict
with END definition in mkiss.c, just undef it at first
Reported-by: lkp@intel.com
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladimir Oltean [Wed, 2 Mar 2022 19:39:39 +0000 (21:39 +0200)]
net: dcb: disable softirqs in dcbnl_flush_dev()
commit
10b6bb62ae1a49ee818fc479cf57b8900176773e upstream.
Ido Schimmel points out that since commit
52cff74eef5d ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.
One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
-> dcb_ieee_setapp
If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().
Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.
Fixes:
91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Sat, 5 Mar 2022 04:29:01 +0000 (20:29 -0800)]
memfd: fix F_SEAL_WRITE after shmem huge page allocated
commit
f2b277c4d1c63a85127e8aa2588e9cc3bd21cb99 upstream.
Wangyong reports: after enabling tmpfs filesystem to support transparent
hugepage with the following command:
echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled
the docker program tries to add F_SEAL_WRITE through the following
command, but it fails unexpectedly with errno EBUSY:
fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1.
That is because memfd_tag_pins() and memfd_wait_for_pins() were never
updated for shmem huge pages: checking page_mapcount() against
page_count() is hopeless on THP subpages - they need to check
total_mapcount() against page_count() on THP heads only.
Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins()
(compared != 1): either can be justified, but given the non-atomic
total_mapcount() calculation, it is better now to be strict. Bear in
mind that total_mapcount() itself scans all of the THP subpages, when
choosing to take an XA_CHECK_SCHED latency break.
Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a
page has been swapped out since memfd_tag_pins(), then its refcount must
have fallen, and so it can safely be untagged.
Link: https://lkml.kernel.org/r/a4f79248-df75-2c8c-3df-ba3317ccb5da@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reported-by: wangyong <wang.yong12@zte.com.cn>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: CGEL ZTE <cgel.zte@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William Mahon [Fri, 4 Mar 2022 02:26:22 +0000 (18:26 -0800)]
HID: add mapping for KEY_ALL_APPLICATIONS
commit
327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream.
This patch adds a new key definition for KEY_ALL_APPLICATIONS
and aliases KEY_DASHBOARD to it.
It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS.
Signed-off-by: William Mahon <wmahon@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 1 Mar 2022 07:39:50 +0000 (23:39 -0800)]
Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
commit
04b7762e37c95d9b965d16bb0e18dbd1fa2e2861 upstream.
Before these changes elan_suspend() would only disable the regulator
when device_may_wakeup() returns false; whereas elan_resume() would
unconditionally enable it, leading to an enable count imbalance when
device_may_wakeup() returns true.
This triggers the "WARN_ON(regulator->enable_count)" in regulator_put()
when the elan_i2c driver gets unbound, this happens e.g. with the
hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1.
Fix this by making the regulator_enable() call also be conditional
on device_may_wakeup() returning false.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 1 Mar 2022 07:39:38 +0000 (23:39 -0800)]
Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
commit
81a36d8ce554b82b0a08e2b95d0bd44fcbff339b upstream.
elan_disable_power() is called conditionally on suspend, where as
elan_enable_power() is always called on resume. This leads to
an imbalance in the regulator's enable count.
Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power()
in preparation of fixing this.
No functional changes intended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com
[dtor: consolidate elan_[en|dis]able() into elan_set_power()]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jia-Ju Bai [Fri, 25 Feb 2022 12:37:27 +0000 (04:37 -0800)]
net: chelsio: cxgb3: check the return value of pci_find_capability()
[ Upstream commit
767b9825ed1765894e569a3d698749d40d83762a ]
The function pci_find_capability() in t3_prep_adapter() can fail, so its
return value should be checked.
Fixes:
4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Thu, 30 Dec 2021 01:45:43 +0000 (09:45 +0800)]
soc: fsl: qe: Check of ioremap return value
[ Upstream commit
a222fd8541394b36b13c89d1698d9530afd59a9c ]
As the possible failure of the ioremap(), the par_io could be NULL.
Therefore it should be better to check it and return error in order to
guarantee the success of the initiation.
But, I also notice that all the caller like mpc85xx_qe_par_io_init() in
`arch/powerpc/platforms/85xx/common.c` don't check the return value of
the par_io_init().
Actually, par_io_init() needs to check to handle the potential error.
I will submit another patch to fix that.
Anyway, par_io_init() itsely should be fixed.
Fixes:
7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Wed, 23 Feb 2022 19:46:35 +0000 (20:46 +0100)]
ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions
commit
7b83299e5b9385943a857d59e15cba270df20d7e upstream.
early_param() handlers should return 0 on success.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 would cause the "option=value" string
to be added to init's environment strings, polluting it.
../arch/arm/mm/mmu.c: In function 'test_early_cachepolicy':
../arch/arm/mm/mmu.c:215:1: error: no return statement in function returning non-void [-Werror=return-type]
../arch/arm/mm/mmu.c: In function 'test_noalign_setup':
../arch/arm/mm/mmu.c:221:1: error: no return statement in function returning non-void [-Werror=return-type]
Fixes:
b849a60e0903 ("ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Mailhol [Mon, 14 Feb 2022 23:48:14 +0000 (08:48 +0900)]
can: gs_usb: change active_channels's type from atomic_t to u8
commit
035b0fcf02707d3c9c2890dc1484b11aa5335eb1 upstream.
The driver uses an atomic_t variable: gs_usb:active_channels to keep
track of the number of opened channels in order to only allocate
memory for the URBs when this count changes from zero to one.
However, the driver does not decrement the counter when an error
occurs in gs_can_open(). This issue is fixed by changing the type from
atomic_t to u8 and by simplifying the logic accordingly.
It is safe to use an u8 here because the network stack big kernel lock
(a.k.a. rtnl_mutex) is being hold. For details, please refer to [1].
[1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t
Fixes:
d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Fri, 18 Feb 2022 18:05:59 +0000 (19:05 +0100)]
efivars: Respect "block" flag in efivar_entry_set_safe()
commit
258dd902022cb10c83671176688074879517fd21 upstream.
When the "block" flag is false, the old code would sometimes still call
check_var_size(), which wrongly tells ->query_variable_store() that it can
block.
As far as I can tell, this can't really materialize as a bug at the moment,
because ->query_variable_store only does something on X86 with generic EFI,
and in that configuration we always take the efivar_entry_set_nonblocking()
path.
Fixes:
ca0e30dcaa53 ("efi: Add nonblocking option to efi_query_variable_store()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220218180559.1432559-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zheyu Ma [Wed, 2 Mar 2022 12:24:23 +0000 (20:24 +0800)]
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
commit
bd6f1fd5d33dfe5d1b4f2502d3694a7cc13f166d upstream.
During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.
The following log reveals it:
[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370
Fix this by checking whether the 'ci' is a null pointer first.
Fixes:
8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Thu, 24 Feb 2022 03:35:28 +0000 (19:35 -0800)]
net: sxgbe: fix return value of __setup handler
commit
50e06ddceeea263f57fe92baa677c638ecd65bb6 upstream.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.
Fixes:
acc18c147b22 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe")
Fixes:
1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Cc: Siva Reddy <siva.kallam@samsung.com>
Cc: Girish K S <ks.giri@samsung.com>
Cc: Byungho An <bh74.an@samsung.com>
Link: https://lore.kernel.org/r/20220224033528.24640-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Thu, 24 Feb 2022 03:35:36 +0000 (19:35 -0800)]
net: stmmac: fix return value of __setup handler
commit
e01b042e580f1fbf4fd8da467442451da00c7a90 upstream.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.
Fixes:
47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Fixes:
f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Escande [Mon, 14 Feb 2022 17:32:14 +0000 (18:32 +0100)]
mac80211: fix forwarded mesh frames AC & queue selection
commit
859ae7018316daa4adbc496012dcbbb458d7e510 upstream.
There are two problems with the current code that have been highlighted
with the AQL feature that is now enbaled by default.
First problem is in ieee80211_rx_h_mesh_fwding(),
ieee80211_select_queue_80211() is used on received packets to choose
the sending AC queue of the forwarding packet although this function
should only be called on TX packet (it uses ieee80211_tx_info).
This ends with forwarded mesh packets been sent on unrelated random AC
queue. To fix that, AC queue can directly be infered from skb->priority
which has been extracted from QOS info (see ieee80211_parse_qos()).
Second problem is the value of queue_mapping set on forwarded mesh
frames via skb_set_queue_mapping() is not the AC of the packet but a
hardware queue index. This may or may not work depending on AC to HW
queue mapping which is driver specific.
Both of these issues lead to improper AC selection while forwarding
mesh packets but more importantly due to improper airtime accounting
(which is done on a per STA, per AC basis) caused traffic stall with
the introduction of AQL.
Fixes:
cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding")
Fixes:
d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping")
Co-developed-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://lore.kernel.org/r/20220214173214.368862-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 1 Dec 2021 13:25:26 +0000 (14:25 +0100)]
firmware: qemu_fw_cfg: fix kobject leak in probe error path
commit
47a1db8e797da01a1309bf42e0c0d771d4e4d4f3 upstream.
An initialised kobject must be freed using kobject_put() to avoid
leaking associated resources (e.g. the object name).
Commit
fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
the leak in the first error path of the file registration helper but
left the second one unchanged. This "fix" would however result in a NULL
pointer dereference due to the release function also removing the never
added entry from the fw_cfg_entry_cache list. This has now been
addressed.
Fix the remaining kobject leak by restoring the common error path and
adding the missing kobject_put().
Fixes:
75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qiushi Wu [Sat, 13 Jun 2020 19:05:33 +0000 (14:05 -0500)]
firmware: Fix a reference count leak.
commit
fe3c60684377d5ad9b0569b87ed3e26e12c8173b upstream.
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Callback function fw_cfg_sysfs_release_entry() in kobject_put()
can handle the pointer "entry" properly.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200613190533.15712-1-wu000273@umn.edu
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladimir Oltean [Thu, 24 Feb 2022 16:01:54 +0000 (18:01 +0200)]
net: dcb: flush lingering app table entries for unregistered devices
commit
91b0383fef06f20b847fa9e4f0e3054ead0b1a1b upstream.
If I'm not mistaken (and I don't think I am), the way in which the
dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates
the application table with dynamically allocated struct dcb_app_type
entries that are kept in the module-global dcb_app_list.
However, nobody keeps exact track of these entries, and although
dcb_ieee_delapp() is supposed to remove them, nobody does so when the
interface goes away (example: driver unbinds from device). So the
dcb_app_list will contain lingering entries with an ifindex that no
longer matches any device in dcb_app_lookup().
Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and
flushing the app table entries of interfaces that are now gone.
In fact something like this used to be done as part of the initial
commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(),
essentially at module_exit time. That became dead code after commit
7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged
"tristate config DCB" and "bool config DCBNL" into a single "bool config
DCB", so net/dcb/dcbnl.c could not be built as a module anymore.
Commit
36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular")
recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether,
leaving us with the version we have today.
Since flushing application table entries can and should be done as soon
as the netdevice disappears, fundamentally the commit that is to blame
is the one that introduced the design of this API.
Fixes:
9ab933ab2cc8 ("dcbnl: add appliction tlv handlers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Mon, 28 Feb 2022 05:22:22 +0000 (06:22 +0100)]
netfilter: nf_queue: fix possible use-after-free
commit
c3873070247d9e3c7a6b0cf9bf9b45e8018427b1 upstream.
Eric Dumazet says:
The sock_hold() side seems suspect, because there is no guarantee
that sk_refcnt is not already 0.
On failure, we cannot queue the packet and need to indicate an
error. The packet will be dropped by the caller.
v2: split skb prefetch hunk into separate change
Fixes:
271b72c7fa82c ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 25 Feb 2022 13:02:41 +0000 (14:02 +0100)]
netfilter: nf_queue: don't assume sk is full socket
commit
747670fd9a2d1b7774030dba65ca022ba442ce71 upstream.
There is no guarantee that state->sk refers to a full socket.
If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.
I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.
Fixes:
ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Bohac [Wed, 19 Jan 2022 09:22:53 +0000 (10:22 +0100)]
xfrm: fix MTU regression
commit
6596a0229541270fb8d38d989f91b78838e5e9da upstream.
Commit
749439bfac6e1a2932c582e2699f91d329658196 ("ipv6: fix udpv6
sendmsg crash caused by too small MTU") breaks PMTU for xfrm.
A Packet Too Big ICMPv6 message received in response to an ESP
packet will prevent all further communication through the tunnel
if the reported MTU minus the ESP overhead is smaller than 1280.
E.g. in a case of a tunnel-mode ESP with sha256/aes the overhead
is 92 bytes. Receiving a PTB with MTU of 1371 or less will result
in all further packets in the tunnel dropped. A ping through the
tunnel fails with "ping: sendmsg: Invalid argument".
Apparently the MTU on the xfrm route is smaller than 1280 and
fails the check inside ip6_setup_cork() added by
749439bf.
We found this by debugging USGv6/ipv6ready failures. Failing
tests are: "Phase-2 Interoperability Test Scenario IPsec" /
5.3.11 and 5.4.11 (Tunnel Mode: Fragmentation).
Commit
b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm:
xfrm_state_mtu should return at least 1280 for ipv6") attempted
to fix this but caused another regression in TCP MSS calculations
and had to be reverted.
The patch below fixes the situation by dropping the MTU
check and instead checking for the underflows described in the
749439bf commit message.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes:
749439bfac6e ("ipv6: fix udpv6 sendmsg crash caused by too small MTU")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Vasut [Tue, 15 Feb 2022 13:06:45 +0000 (14:06 +0100)]
ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min
commit
9bdd10d57a8807dba0003af0325191f3cec0f11c upstream.
While the $val/$val2 values passed in from userspace are always >= 0
integers, the limits of the control can be signed integers and the $min
can be non-zero and less than zero. To correctly validate $val/$val2
against platform_max, add the $min offset to val first.
Fixes:
817f7c9335ec0 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220215130645.164025-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Sat, 19 Feb 2022 20:04:29 +0000 (23:04 +0300)]
ata: pata_hpt37x: fix PCI clock detection
[ Upstream commit
5f6b0f2d037c8864f20ff15311c695f65eb09db5 ]
The f_CNT register (at the PCI config. address 0x78) is 16-bit, not
8-bit! The bug was there from the very start... :-(
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Fixes:
669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangyu Hua [Fri, 31 Dec 2021 17:21:38 +0000 (01:21 +0800)]
usb: gadget: clear related members when goto fail
commit
501e38a5531efbd77d5c73c0ba838a889bfc1d74 upstream.
dev->config and dev->hs_config and dev->dev need to be cleaned if
dev_config fails to avoid UAF.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211231172138.7993-3-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangyu Hua [Fri, 31 Dec 2021 17:21:37 +0000 (01:21 +0800)]
usb: gadget: don't release an existing dev->buf
commit
89f3594d0de58e8a57d92d497dea9fee3d4b9cda upstream.
dev->buf does not need to be released if it already exists before
executing dev_config.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211231172138.7993-2-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Tue, 15 Feb 2022 11:13:35 +0000 (12:13 +0100)]
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
[ Upstream commit
21e8a96377e6b6debae42164605bf9dcbe5720c5 ]
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wolfram Sang [Sat, 12 Feb 2022 19:47:07 +0000 (20:47 +0100)]
i2c: qup: allow COMPILE_TEST
[ Upstream commit
5de717974005fcad2502281e9f82e139ca91f4bb ]
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yongzhi Liu [Sun, 16 Jan 2022 05:34:56 +0000 (21:34 -0800)]
dmaengine: shdma: Fix runtime PM imbalance on error
[ Upstream commit
455896c53d5b803733ddd84e1bf8a430644439b6 ]
pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ronnie Sahlberg [Thu, 10 Feb 2022 16:59:15 +0000 (02:59 +1000)]
cifs: fix double free race when mount fails in cifs_get_root()
[ Upstream commit
3d6cc9898efdfb062efb74dc18cfc700e082f5d5 ]
When cifs_get_root() fails during cifs_smb3_do_mount() we call
deactivate_locked_super() which eventually will call delayed_free() which
will free the context.
In this situation we should not proceed to enter the out: section in
cifs_smb3_do_mount() and free the same resources a second time.
[Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] Read of size 8 at addr
ffff888364f4d110 by task swapper/1/0
[Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4
[Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
[Thu Feb 10 12:59:06 2022] Call Trace:
[Thu Feb 10 12:59:06 2022] <IRQ>
[Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78
[Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150
[Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117
[Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0
[Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0
[Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0
[Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20
[Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140
[Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10
[Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b
[Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150
[Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30
[Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0
...
[Thu Feb 10 12:59:07 2022] Freed by task 58179:
[Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50
[Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30
[Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40
[Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170
[Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20
[Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0
[Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520
[Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs]
[Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs]
[Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140
[Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0
[Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210
[Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0
[Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae
[Thu Feb 10 12:59:07 2022] Last potentially related work creation:
[Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50
[Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0
[Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10
[Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0
[Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs]
[Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs]
[Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0
[Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs]
[Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs]
[Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140
[Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0
[Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210
[Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0
[Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
José Expósito [Tue, 8 Feb 2022 17:59:16 +0000 (09:59 -0800)]
Input: clear BTN_RIGHT/MIDDLE on buttonpads
[ Upstream commit
37ef4c19b4c659926ce65a7ac709ceaefb211c40 ]
Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit
and the BTN_LEFT key bit.
As explained in the specification, where a device has a button type
value of 0 (click-pad) or 1 (pressure-pad) there should not be
discrete buttons:
https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report
However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even
though the device is a buttonpad and therefore does not have those
buttons.
This behavior has forced userspace applications like libinput to
implement different workarounds and quirks to detect buttonpads and
offer to the user the right set of features and configuration options.
For more information:
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726
In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key
bits when the input device is register if the INPUT_PROP_BUTTONPAD
property bit is set.
Notice that this change will not affect udev because it does not check
for buttons. See systemd/src/udev/udev-builtin-input_id.c.
List of known affected hardware:
- Chuwi AeroBook Plus
- Chuwi Gemibook
- Framework Laptop
- GPD Win Max
- Huawei MateBook 2020
- Prestigio Smartbook 141 C2
- Purism Librem 14v1
- StarLite Mk II - AMI firmware
- StarLite Mk II - Coreboot firmware
- StarLite Mk III - AMI firmware
- StarLite Mk III - Coreboot firmware
- StarLabTop Mk IV - AMI firmware
- StarLabTop Mk IV - Coreboot firmware
- StarBook Mk V
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Anholt [Fri, 23 Feb 2018 21:42:31 +0000 (22:42 +0100)]
i2c: bcm2835: Avoid clock stretching timeouts
[ Upstream commit
9495b9b31abe525ebd93da58de2c88b9f66d3a0e ]
The CLKT register contains at poweron 0x40, which at our typical 100kHz
bus rate means .64ms. But there is no specified limit to how long devices
should be able to stretch the clocks, so just disable the timeout. We
still have a timeout wrapping the entire transfer.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
BugLink: https://github.com/raspberrypi/linux/issues/3064
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
JaeMan Park [Thu, 13 Jan 2022 06:02:35 +0000 (15:02 +0900)]
mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work
[ Upstream commit
cacfddf82baf1470e5741edeecb187260868f195 ]
In mac80211_hwsim, the probe_req frame is created and sent while
scanning. It is sent with ieee80211_tx_info which is not initialized.
Uninitialized ieee80211_tx_info can cause problems when using
mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of
ieee80211_tx_info and doesn't relay probe_req frame to other clients
even if it is a broadcasting message.
Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for
the probe_req that is created by hw_scan_work in mac80211_hwsim.
Signed-off-by: JaeMan Park <jaeman@google.com>
Link: https://lore.kernel.org/r/20220113060235.546107-1-jaeman@google.com
[fix memory leak]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Beichler [Tue, 11 Jan 2022 22:13:26 +0000 (22:13 +0000)]
mac80211_hwsim: report NOACK frames in tx_status
[ Upstream commit
42a79960ffa50bfe9e0bf5d6280be89bf563a5dd ]
Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper
statistics for non-acked frames.
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Link: https://lore.kernel.org/r/20220111221327.1499881-1-benjamin.beichler@uni-rostock.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 2 Mar 2022 10:32:07 +0000 (11:32 +0100)]
Linux 4.9.304
Link: https://lore.kernel.org/r/20220228172141.744228435@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 26 Feb 2022 06:33:24 +0000 (14:33 +0800)]
fget: clarify and improve __fget_files() implementation
commit
e386dfc56f837da66d00a078e5314bc8382fab83 upstream.
Commit
054aa8d439b9 ("fget: check that the fd still exists after getting
a ref to it") fixed a race with getting a reference to a file just as it
was being closed. It was a fairly minimal patch, and I didn't think
re-checking the file pointer lookup would be a measurable overhead,
since it was all right there and cached.
But I was wrong, as pointed out by the kernel test robot.
The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed
quite noticeably. Admittedly it seems to be a very artificial test:
doing "poll()" system calls on regular files in a very tight loop in
multiple threads.
That means that basically all the time is spent just looking up file
descriptors without ever doing anything useful with them (not that doing
'poll()' on a regular file is useful to begin with). And as a result it
shows the extra "re-check fd" cost as a sore thumb.
Happily, the regression is fixable by just writing the code to loook up
the fd to be better and clearer. There's still a cost to verify the
file pointer, but now it's basically in the noise even for that
benchmark that does nothing else - and the code is more understandable
and has better comments too.
[ Side note: this patch is also a classic case of one that looks very
messy with the default greedy Myers diff - it's much more legible with
either the patience of histogram diff algorithm ]
Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/20211213083154.GA20853@linux.intel.com/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Carel Si <beibei.si@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaohe Lin [Thu, 17 Feb 2022 14:53:27 +0000 (22:53 +0800)]
memblock: use kfree() to release kmalloced memblock regions
commit
c94afc46cae7ad41b2ad6a99368147879f4b0e56 upstream.
memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions
indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Fixes:
3010f876500f ("mm: discard memblock data later")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
daniel.starke@siemens.com [Fri, 18 Feb 2022 07:31:19 +0000 (23:31 -0800)]
tty: n_gsm: fix proper link termination after failed open
commit
e3b7468f082d106459e86e8dc6fb9bdd65553433 upstream.
Trying to open a DLCI by sending a SABM frame may fail with a timeout.
The link is closed on the initiator side without informing the responder
about this event. The responder assumes the link is open after sending a
UA frame to answer the SABM frame. The link gets stuck in a half open
state.
This patch fixes this by initiating the proper link termination procedure
after link setup timeout instead of silently closing it down.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
daniel.starke@siemens.com [Fri, 18 Feb 2022 07:31:17 +0000 (23:31 -0800)]
tty: n_gsm: fix encoding of control signal octet bit DV
commit
737b0ef3be6b319d6c1fd64193d1603311969326 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the
control signal octet used by the MSC (modem status command). The same
encoding is also used in convergence layer type 2 as described in chapter
5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for
outgoing control signal octets sent by the DTE (data terminal equipment),
i.e. for the initiator side.
Currently, the DV bit is only set if CD (carrier detect) is on, regardless
of the side.
This patch fixes this behavior by setting the DV bit on the initiator side
unconditionally.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hongyu Xie [Tue, 15 Feb 2022 12:33:20 +0000 (14:33 +0200)]
xhci: Prevent futile URB re-submissions due to incorrect return value.
commit
243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream.
The -ENODEV return value from xhci_check_args() is incorrectly changed
to -EINVAL in a couple places before propagated further.
xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This causes problems for example r8152_submit_rx, calling usb_submit_urb
in drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
is halted because xhci_urb_enqueue returns -EINVAL in the very beginning.
[commit message and header edit -Mathias]
Fixes:
203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Andrzej Siewior [Fri, 18 Feb 2022 17:32:45 +0000 (18:32 +0100)]
usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
commit
84918a89d6efaff075de570b55642b6f4ceeac6d upstream.
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes:
e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Fri, 18 Feb 2022 13:45:52 +0000 (14:45 +0100)]
USB: serial: option: add Telit LE910R1 compositions
commit
cfc4442c642d568014474b6718ccf65dc7ca6099 upstream.
Add support for the following Telit LE910R1 compositions:
0x701a: rndis, tty, tty, tty
0x701b: ecm, tty, tty, tty
0x9201: tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slark Xiao [Mon, 14 Feb 2022 02:14:01 +0000 (10:14 +0800)]
USB: serial: option: add support for DW5829e
commit
6ecb3f0b18b320320460a42e40d6fb603f6ded96 upstream.
Dell DW5829e same as DW5821e except CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
There are 2 types product of DW5829e: normal and eSIM.
So we will add 2 PID for DW5829e.
And for each PID, it support MBIM or RMNET.
Let's see test evidence as below:
DW5829e MBIM mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e RMNET mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
DW5829e-eSIM MBIM mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e-eSIM RMNET mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA
port. So it's banned from serial option driver.
The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com
[ johan: drop unnecessary reservation of interface 1 ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Fri, 25 Feb 2022 20:34:26 +0000 (15:34 -0500)]
tracefs: Set the group ownership in apply_options() not parse_options()
commit
851e99ebeec3f4a672bb5010cf1ece095acee447 upstream.
Al Viro brought it to my attention that the dentries may not be filled
when the parse_options() is called, causing the call to set_gid() to
possibly crash. It should only be called if parse_options() succeeds
totally anyway.
He suggested the logical place to do the update is in apply_options().
Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/
Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes:
48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Szymon Heidrich [Mon, 21 Feb 2022 12:24:56 +0000 (13:24 +0100)]
USB: gadget: validate endpoint index for xilinx udc
commit
7f14c7227f342d9932f9b918893c8814f86d2a0d upstream.
Assure that host may not manipulate the index to point
past endpoint array.
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daehwan Jung [Tue, 22 Feb 2022 05:29:28 +0000 (14:29 +0900)]
usb: gadget: rndis: add spinlock for rndis response list
commit
aaaba1c86d04dac8e49bf508b492f81506257da3 upstream.
There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.
[ 361.894299] [1: irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (
ffffff80651764d0),
but was
ffffff883dc36f80. (next=
ffffff80651764d0).
[ 361.904380] [1: irq/191-dwc3:16979] Call trace:
[ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90
[ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0
[ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84
[ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4
[ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60
[ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0
[ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc
[ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc
[ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec
[ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c
Fixes:
f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe")
Cc: stable <stable@kernel.org>
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmytro Bagrii [Thu, 10 Feb 2022 16:41:37 +0000 (18:41 +0200)]
Revert "USB: serial: ch341: add new Product ID for CH341A"
commit
198a7ebd5fa17b4d0be8cb70240ee1be885175c0 upstream.
This reverts commit
46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63.
CH341 has Product ID 0x5512 in EPP/MEM mode which is used for
I2C/SPI/GPIO interfaces. In asynchronous serial interface mode
CH341 has PID 0x5523 which is already in the table.
Mode is selected by corresponding jumper setting.
Signed-off-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com
Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Sat, 19 Feb 2022 17:44:43 +0000 (20:44 +0300)]
ata: pata_hpt37x: disable primary channel on HPT371
commit
8d093e02e898b24c58788b0289e3202317a96d2a upstream.
The HPT371 chip physically has only one channel, the secondary one,
however the primary channel registers do exist! Thus we have to
manually disable the non-existing channel if the BIOS hasn't done this
already. Similarly to the pata_hpt3x2n driver, always disable the
primary channel.
Fixes:
669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Sat, 29 Jan 2022 08:32:47 +0000 (09:32 +0100)]
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
commit
e0a2e37f303828d030a83f33ffe14b36cb88d563 upstream.
If iio_device_register() fails, a previous ioremap() is left unbalanced.
Update the error handling path and add the missing iounmap() call, as
already done in the remove function.
Fixes:
74aeac4da66f ("iio: adc: Add MEN 16z188 ADC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.1643445149.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Tue, 15 Feb 2022 21:05:11 +0000 (13:05 -0800)]
RDMA/ib_srp: Fix a deadlock
[ Upstream commit
081bdc9fe05bb23248f5effb6f811da3da4b8252 ]
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync()
Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org
Fixes:
ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD")
Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ChenXiaoSong [Tue, 15 Feb 2022 07:10:30 +0000 (15:10 +0800)]
configfs: fix a race in configfs_{,un}register_subsystem()
[ Upstream commit
84ec758fb2daa236026506868c8796b0500c047d ]
When configfs_register_subsystem() or configfs_unregister_subsystem()
is executing link_group() or unlink_group(),
it is possible that two processes add or delete list concurrently.
Some unfortunate interleavings of them can cause kernel panic.
One of cases is:
A --> B --> C --> D
A <-- B <-- C <-- D
delete list_head *B | delete list_head *C
--------------------------------|-----------------------------------
configfs_unregister_subsystem | configfs_unregister_subsystem
unlink_group | unlink_group
unlink_obj | unlink_obj
list_del_init | list_del_init
__list_del_entry | __list_del_entry
__list_del | __list_del
// next == C |
next->prev = prev |
| next->prev = prev
prev->next = next |
| // prev == B
| prev->next = next
Fix this by adding mutex when calling link_group() or unlink_group(),
but parent configfs_subsystem is NULL when config_item is root.
So I create a mutex configfs_subsystem_mutex.
Fixes:
7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gal Pressman [Wed, 2 Feb 2022 14:07:21 +0000 (16:07 +0200)]
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
commit
0b89429722353d112f8b8b29ca397e95fa994d27 upstream.
The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.
Fixes:
bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Ripard [Thu, 3 Feb 2022 11:54:16 +0000 (12:54 +0100)]
drm/edid: Always set RGB444
commit
ecbd4912a693b862e25cba0a6990a8c95b00721e upstream.
In order to fill the drm_display_info structure each time an EDID is
read, the code currently will call drm_add_display_info with the parsed
EDID.
drm_add_display_info will then call drm_reset_display_info to reset all
the fields to 0, and then set them to the proper value depending on the
EDID.
In the color_formats case, we will thus report that we don't support any
color format, and then fill it back with RGB444 plus the additional
formats described in the EDID Feature Support byte.
However, since that byte only contains format-related bits since the 1.4
specification, this doesn't happen if the EDID is following an earlier
specification. In turn, it means that for one of these EDID, we end up
with color_formats set to 0.
The EDID 1.3 specification never really specifies what it means by RGB
exactly, but since both HDMI and DVI will use RGB444, it's fairly safe
to assume it's supposed to be RGB444.
Let's move the addition of RGB444 to color_formats earlier in
drm_add_display_info() so that it's always set for a digital display.
Fixes:
da05a5a71ad8 ("drm: parse color format support for digital displays")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Blakey [Wed, 23 Feb 2022 16:34:16 +0000 (18:34 +0200)]
openvswitch: Fix setting ipv6 fields causing hw csum failure
commit
d9b5ae5c1b241b91480aa30408be12fe91af834a upstream.
Ipv6 ttl, label and tos fields are modified without first
pulling/pushing the ipv6 header, which would have updated
the hw csum (if available). This might cause csum validation
when sending the packet to the stack, as can be seen in
the trace below.
Fix this by updating skb->csum if available.
Trace resulted by ipv6 ttl dec and then sending packet
to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]:
[295241.900063] s_pf0vf2: hw csum failure
[295241.923191] Call Trace:
[295241.925728] <IRQ>
[295241.927836] dump_stack+0x5c/0x80
[295241.931240] __skb_checksum_complete+0xac/0xc0
[295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack]
[295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack]
[295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch]
[295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch]
[295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch]
[295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch]
[295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch]
[295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch]
[295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch]
[295242.034074] __netif_receive_skb_core+0x2ca/0xcb0
[295242.047498] netif_receive_skb_internal+0x3e/0xc0
[295242.052291] napi_gro_receive+0xba/0xe0
[295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core]
[295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core]
[295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core]
[295242.077958] net_rx_action+0x149/0x3b0
[295242.086762] __do_softirq+0xd7/0x2d6
[295242.090427] irq_exit+0xf7/0x100
[295242.093748] do_IRQ+0x7f/0xd0
[295242.096806] common_interrupt+0xf/0xf
[295242.100559] </IRQ>
[295242.102750] RIP: 0033:0x7f9022e88cbd
[295242.125246] RSP: 002b:
00007f9022282b20 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffffda
[295242.132900] RAX:
0000000000000005 RBX:
0000000000000010 RCX:
0000000000000000
[295242.140120] RDX:
00007f9022282ba8 RSI:
00007f9022282a30 RDI:
00007f9014005c30
[295242.147337] RBP:
00007f9014014d60 R08:
0000000000000020 R09:
00007f90254a8340
[295242.154557] R10:
00007f9022282a28 R11:
0000000000000246 R12:
0000000000000000
[295242.161775] R13:
00007f902308c000 R14:
000000000000002b R15:
00007f9022b71f40
Fixes:
3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tao Liu [Fri, 18 Feb 2022 14:35:24 +0000 (22:35 +0800)]
gso: do not skip outer ip header in case of ipip and net_failover
commit
cc20cced0598d9a5ff91ae4ab147b3b5e99ee819 upstream.
We encounter a tcp drop issue in our cloud environment. Packet GROed in
host forwards to a VM virtio_net nic with net_failover enabled. VM acts
as a IPVS LB with ipip encapsulation. The full path like:
host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat
-> ipip encap -> net_failover tx -> virtio_net tx
When net_failover transmits a ipip pkt (gso_type = 0x0103, which means
SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso
did because it supports TSO and GSO_IPXIP4. But network_header points to
inner ip header.
Call Trace:
tcp4_gso_segment ------> return NULL
inet_gso_segment ------> inner iph, network_header points to
ipip_gso_segment
inet_gso_segment ------> outer iph
skb_mac_gso_segment
Afterwards virtio_net transmits the pkt, only inner ip header is modified.
And the outer one just keeps unchanged. The pkt will be dropped in remote
host.
Call Trace:
inet_gso_segment ------> inner iph, outer iph is skipped
skb_mac_gso_segment
__skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
__qdisc_run
__dev_queue_xmit ------> virtio_net
dev_hard_start_xmit
__dev_queue_xmit ------> net_failover
ip_finish_output2
ip_output
iptunnel_xmit
ip_tunnel_xmit
ipip_tunnel_xmit ------> ipip
dev_hard_start_xmit
__dev_queue_xmit
ip_finish_output2
ip_output
ip_forward
ip_rcv
__netif_receive_skb_one_core
netif_receive_skb_internal
napi_gro_receive
receive_buf
virtnet_poll
net_rx_action
The root cause of this issue is specific with the rare combination of
SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option.
SKB_GSO_DODGY is set from external virtio_net. We need to reset network
header when callbacks.gso_segment() returns NULL.
This patch also includes ipv6_gso_segment(), considering SIT, etc.
Fixes:
cb32f511a70b ("ipip: add GSO/TSO support")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sun, 20 Feb 2022 15:40:52 +0000 (07:40 -0800)]
net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends
commit
ef527f968ae05c6717c39f49c8709a7e2c19183a upstream.
Whenever one of these functions pull all data from an skb in a frag_list,
use consume_skb() instead of kfree_skb() to avoid polluting drop
monitoring.
Fixes:
6fa01ccd8830 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220220154052.1308469-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Wed, 12 Jan 2022 19:42:14 +0000 (13:42 -0600)]
serial: 8250: of: Fix mapped region size when using reg-offset property
commit
d06b1cf28297e27127d3da54753a3a01a2fa2f28 upstream.
8250_of supports a reg-offset property which is intended to handle
cases where the device registers start at an offset inside the region
of memory allocated to the device. The Xilinx 16550 UART, for which this
support was initially added, requires this. However, the code did not
adjust the overall size of the mapped region accordingly, causing the
driver to request an area of memory past the end of the device's
allocation. For example, if the UART was allocated an address of
0xb0130000, size of 0x10000 and reg-offset of 0x1000 in the device
tree, the region of memory reserved was
b0131000-
b0140fff, which caused
the driver for the region starting at
b0140000 to fail to probe.
Fix this by subtracting reg-offset from the mapped region size.
Fixes:
b912b5e2cfb3 ([POWERPC] Xilinx: of_serial support for Xilinx uart 16550.)
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112194214.881844-1-robert.hancock@calian.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Wed, 19 Jul 2017 08:32:37 +0000 (11:32 +0300)]
serial: 8250: fix error handling in of_platform_serial_probe()
commit
fa9ba3acb557e444fe4a736ab654f0d0a0fbccde upstream.
clk_disable_unprepare(info->clk) is missed in of_platform_serial_probe(),
while irq_dispose_mapping(port->irq) is missed in of_platform_serial_setup().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Mon, 14 Feb 2022 14:08:18 +0000 (15:08 +0100)]
USB: zaurus: support another broken Zaurus
commit
6605cc67ca18b9d583eb96e18a20f5f4e726103c upstream.
This SL-6000 says Direct Line, not Ethernet
v2: added Reporter and Link
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Ross Maynard <bids.7405@bigpond.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Thu, 17 Feb 2022 13:10:44 +0000 (14:10 +0100)]
sr9700: sanity check for packet length
commit
e9da0b56fe27206b49f39805f7dcda8a89379062 upstream.
A malicious device can leak heap data to user space
providing bogus frame lengths. Introduce a sanity check.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Fri, 18 Feb 2022 22:40:14 +0000 (23:40 +0100)]
parisc/unaligned: Fix ldw() and stw() unalignment handlers
commit
a97279836867b1cb50a3d4f0b1bf60e0abe6d46c upstream.
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Fri, 18 Feb 2022 08:25:20 +0000 (09:25 +0100)]
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
commit
dd2288f4a020d693360e3e8d72f8b9d9c25f5ef6 upstream.
Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefano Garzarella [Tue, 22 Feb 2022 09:47:42 +0000 (10:47 +0100)]
vhost/vsock: don't check owner in vhost_vsock_stop() while releasing
commit
a58da53ffd70294ebea8ecd0eb45fd0d74add9f9 upstream.
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device
ownership. It expects current->mm to be valid.
vhost_vsock_stop() is also called by vhost_vsock_dev_release() when
the user has not done close(), so when we are in do_exit(). In this
case current->mm is invalid and we're releasing the device, so we
should clean it anyway.
Let's check the owner only when vhost_vsock_stop() is called
by an ioctl.
When invoked from release we can not fail so we don't check return
code of vhost_vsock_stop(). We need to stop vsock even if it's not
the owner.
Fixes:
433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
david regan [Wed, 26 Jan 2022 22:43:44 +0000 (23:43 +0100)]
mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status
commit
36415a7964711822e63695ea67fede63979054d9 upstream.
The brcmnand driver contains a bug in which if a page (example 2k byte)
is read from the parallel/ONFI NAND and within that page a subpage (512
byte) has correctable errors which is followed by a subpage with
uncorrectable errors, the page read will return the wrong status of
correctable (as opposed to the actual status of uncorrectable.)
The bug is in function brcmnand_read_by_pio where there is a check for
uncorrectable bits which will be preempted if a previous status for
correctable bits is detected.
The fix is to stop checking for bad bits only if we already have a bad
bits status.
Fixes:
27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: david regan <dregan@mail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02
[florian: make patch apply to 4.14, file was renamed]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 23 Feb 2022 10:56:41 +0000 (11:56 +0100)]
Linux 4.9.303
Link: https://lore.kernel.org/r/20220221084908.568970525@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slark Xiao [Wed, 9 Feb 2022 02:47:17 +0000 (10:47 +0800)]
net: usb: qmi_wwan: Add support for Dell DW5829e
[ Upstream commit
8ecbb179286cbc91810c16caeb3396e06305cd0c ]
Dell DW5829e same as DW5821e except the CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
Also, DW5829e includes normal and eSIM type.
Please see below test evidence:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
JaeSang Yoo [Tue, 8 Feb 2022 19:54:22 +0000 (04:54 +0900)]
tracing: Fix tp_printk option related with tp_printk_stop_on_boot
[ Upstream commit
3203ce39ac0b2a57a84382ec184c7d4a0bede175 ]
The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is
the same as another kernel parameter "tp_printk". If "tp_printk" setup is
called before the "tp_printk_stop_on_boot", it will override the latter
and keep it from being set.
This is similar to other kernel parameter issues, such as:
Commit
745a600cf1a6 ("um: console: Ignore console= option")
or init/do_mounts.c:45 (setup function of "ro" kernel param)
Fix it by checking for a "_" right after the "tp_printk" and if that
exists do not process the parameter.
Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
[ Fixed up change log and added space after if condition ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zoltán Böszörményi [Fri, 4 Feb 2022 12:57:50 +0000 (13:57 +0100)]
ata: libata-core: Disable TRIM on M88V29
[ Upstream commit
c8ea23d5fa59f28302d4e3370c75d9c308e64410 ]
This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.
While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.
TRIM must be disabled for this device.
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Tue, 15 Feb 2022 23:05:18 +0000 (18:05 -0500)]
NFS: Do not report writeback errors in nfs_getattr()
[ Upstream commit
d19e0183a88306acda07f4a01fedeeffe2a2a06b ]
The result of the writeback, whether it is an ENOSPC or an EIO, or
anything else, does not inhibit the NFS client from reporting the
correct file timestamps.
Fixes:
79566ef018f5 ("NFS: Getattr doesn't require data sync semantics")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jim Mattson [Thu, 3 Feb 2022 01:48:13 +0000 (17:48 -0800)]
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
[ Upstream commit
710c476514313c74045c41c0571bb5178fd16e3d ]
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a
RAW perf event.
Fixes:
ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <
20220203014813.
2130559-2-jmattson@google.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Kellermann [Mon, 21 Feb 2022 10:03:13 +0000 (11:03 +0100)]
lib/iov_iter: initialize "flags" in new pipe_buffer
commit
9d2231c5d74e13b2a0546fee6737ee4446017903 upstream.
The functions copy_page_to_iter_pipe() and push_pipe() can both
allocate a new pipe_buffer, but the "flags" member initializer is
missing.
Fixes:
241699cd72a8 ("new iov_iter flavour: pipe-backed")
To: Alexander Viro <viro@zeniv.linux.org.uk>
To: linux-fsdevel@vger.kernel.org
To: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafał Miłecki [Tue, 15 Feb 2022 07:27:35 +0000 (08:27 +0100)]
i2c: brcmstb: fix support for DSL and CM variants
commit
834cea3a252ed4847db076a769ad9efe06afe2d5 upstream.
DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.
Fixes:
e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliav Farber [Thu, 13 Jan 2022 10:06:19 +0000 (10:06 +0000)]
EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
commit
f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream.
Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.
This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.
The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.
Use the correct variable "ptr" for that.
[ bp: Massage commit message. ]
Fixes:
8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Tue, 8 Feb 2022 18:38:23 +0000 (13:38 -0500)]
NFS: LOOKUP_DIRECTORY is also ok with symlinks
commit
e0caaf75d443e02e55e146fd75fe2efc8aed5540 upstream.
Commit
ac795161c936 (NFSv4: Handle case where the lookup of a directory
fails) [1], part of Linux since 5.17-rc2, introduced a regression, where
a symbolic link on an NFS mount to a directory on another NFS does not
resolve(?) the first time it is accessed:
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes:
ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Tue, 1 Feb 2022 15:56:28 +0000 (15:56 +0000)]
ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()
commit
650204ded3703b5817bd4b6a77fa47d333c4f902 upstream.
When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Tue, 1 Feb 2022 15:56:26 +0000 (15:56 +0000)]
ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()
commit
564778d7b1ea465f9487eedeece7527a033549c5 upstream.
When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 14 Feb 2022 10:00:20 +0000 (11:00 +0100)]
ALSA: hda: Fix missing codec probe on Shenker Dock 15
commit
dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 upstream.
By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the
codec mask properly for the onboard audio. Let's set the forced codec
mask to enable the codec discovery.
Reported-by: dmummenschanz@web.de
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22
Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 14 Feb 2022 10:00:19 +0000 (11:00 +0100)]
ALSA: hda: Fix regression on forced probe mask option
commit
6317f7449348a897483a2b4841f7a9190745c81b upstream.
The forced probe mask via probe_mask 0x100 bit doesn't work any longer
as expected since the bus init code was moved and it's clearing the
codec_mask value that was set beforehand. This patch fixes the
long-time regression by moving the check_probe_mask() call.
Fixes:
a41d122449be ("ALSA: hda - Embed bus into controller object")
Reported-by: dmummenschanz@web.de
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22
Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Sun, 13 Feb 2022 18:24:43 +0000 (10:24 -0800)]
libsubcmd: Fix use-after-free for realloc(..., 0)
commit
52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream.
GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:
In file included from help.c:12:
In function 'xrealloc',
inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
Fixes:
2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 10 Feb 2022 17:13:31 +0000 (09:13 -0800)]
drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit
commit
dcd54265c8bc14bd023815e36e2d5f9d66ee1fee upstream.
trace_napi_poll_hit() is reading stat->dev while another thread can write
on it from dropmon_net_event()
Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already,
we only have to take care of load/store tearing.
BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit
write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1:
dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579
notifier_call_chain kernel/notifier.c:84 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392
call_netdevice_notifiers_info net/core/dev.c:1919 [inline]
call_netdevice_notifiers_extack net/core/dev.c:1931 [inline]
call_netdevice_notifiers net/core/dev.c:1945 [inline]
unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415
ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123
vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515
ops_exit_list net/core/net_namespace.c:173 [inline]
cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0:
trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292
trace_napi_poll include/trace/events/napi.h:14 [inline]
__napi_poll+0x36b/0x3f0 net/core/dev.c:6366
napi_poll net/core/dev.c:6432 [inline]
net_rx_action+0x29e/0x650 net/core/dev.c:6519
__do_softirq+0x158/0x2de kernel/softirq.c:558
do_softirq+0xb1/0xf0 kernel/softirq.c:459
__local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:394 [inline]
ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
value changed: 0xffff88815883e000 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker
Fixes:
4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Fri, 28 Jan 2022 12:30:52 +0000 (14:30 +0200)]
iwlwifi: pcie: fix locking when "HW not ready"
commit
e9848aed147708a06193b40d78493b0ef6abccf2 upstream.
If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this.
Fixes:
a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Seth Forshee [Thu, 17 Feb 2022 14:13:12 +0000 (08:13 -0600)]
vsock: remove vsock from connected table when connect is interrupted by a signal
commit
b9208492fcaecff8f43915529ae34b3bcb03877c upstream.
vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.
Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.
Note for backporting: this patch requires
d5afa82c977e ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.
Fixes:
d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Muthuswamy [Thu, 13 Jun 2019 03:52:27 +0000 (03:52 +0000)]
vsock: correct removal of socket from the list
commit
d5afa82c977ea06f7119058fa0eb8519ea501031 upstream.
The current vsock code for removal of socket from the list is both
subject to race and inefficient. It takes the lock, checks whether
the socket is in the list, drops the lock and if the socket was on the
list, deletes it from the list. This is subject to race because as soon
as the lock is dropped once it is checked for presence, that condition
cannot be relied upon for any decision. It is also inefficient because
if the socket is present in the list, it takes the lock twice.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 3 Jan 2022 17:32:36 +0000 (11:32 -0600)]
taskstats: Cleanup the use of task->exit_code
commit
1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.
In the function bacct_add_task the code reading task->exit_code was
introduced in commit
f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.
As best as I can figure the intent is to return task->exit_code after
a task exits. The field is returned with per task fields, so the
exit_code of the entire process is not wanted. Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code. The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.
It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.
Make ac_exitcode a reliable per task value by always returning it for
every exited task.
Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.
Cc: Balbir Singh <bsingharora@gmail.com>
Fixes:
f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log