git.stricted.de - GitHub/MotorolaMobilityLLC/kernel-slsi.git/log

RDMA/amso1100: Deprecate the amso1100 driver and move to staging

The HW hasn't been sold since 2005, and the SW has definite bit rot.
Its time to remove it. So move it to staging for a few releases and
then remove it after that.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ipath: Deprecate ipath driver and move to staging.

It is now time for the ipath driver to begin to be phased out of the kernel.
This patch moves the ipath driver from the Infiniband sub tree to the staging
area where it will remain until the code is removed from the kernel in a few
releases.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Staging: Add staging/rdma directory and update MAINTAINERS

Create the rdma directory in the staging area for use as we deprecate
some older drivers and as we bring in some new drivers that are in
need of work. Update the MAINTAINERS file so that updates to these
files go to linux-rdma@vger.kernel.org. Expected lifespan of this
directory is three releases for any deprecated drivers moved here
and an unknown, but theoretically bounded amount of time for the new
drivers as a new core RDMA transfer library needs to be written and
the drivers modified to use it in order for them to move out of this
directory.

Signed-off-by: Doug Ledford <dledford@redhat.com>

iw_cxgb4: Add support for clip

Add support for ipv6 address handling clip api provided by lld

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/cma: fix IPv6 address resolution

Resolving a link-local IPv6 address with an unspecified source address
was broken by commit 5462eddd7a, which prevented the IPv6 stack from
learning the scope id of the link-local IPv6 address, causing random
failures as the IP stack chose a random link to resolve the address on.

This commit 5462eddd7a made us bail out of cma_check_linklocal early if
the address passed in was not an IPv6 link-local address. On the address
resolution path, the address passed in is the source address; if the
source address is the unspecified address, which is not link-local, we
will bail out early.

This is mostly correct, but if the destination address is a link-local
address, then we will be following a link-local route, and we'll need to
tell the IPv6 stack what the scope id of the destination address is.
This used to be done by last line of cma_check_linklocal, which is
skipped when bailing out early:

dev_addr->bound_dev_if = sin6->sin6_scope_id;

(In cma_bind_addr, the sin6_scope_id of the source address is set to the
sin6_scope_id of the destination address, so this is correct)
This line is required in turn for the following line, L279 of
addr6_resolve, to actually inform the IPv6 stack of the scope id:

fl6.flowi6_oif = addr->bound_dev_if;

Since we can only know we are in this failure case when we have access
to both the source IPv6 address and destination IPv6 address, we have to
deal with this further up the stack. So detect this failure case in
cma_bind_addr, and set bound_dev_if to the destination address scope id
to correct it.

Signed-off-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ucma: Fix theoretical user triggered use-after-free

Something like this:

CPU A                         CPU B
Acked-by: Sean Hefty <sean.hefty@intel.com>
========================      ================================
ucma_destroy_id()
wait_for_completion()
                              .. anything
                                ucma_put_ctx()
                                  complete()
.. continues ...
                              ucma_leave_multicast()
                               mutex_lock(mut)
                                 atomic_inc(ctx->ref)
                               mutex_unlock(mut)
ucma_free_ctx()
  ucma_cleanup_multicast()
   mutex_lock(mut)
     kfree(mc)
                               rdma_leave_multicast(mc->ctx->cm_id,..

Fix it by latching the ref at 0. Once it goes to 0 mc and ctx cannot
leave the mutex(mut) protection.

The other atomic_inc in ucma_get_ctx is OK because mutex(mut) protects
it from racing with ucma_destroy_id.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

iw_cxgb4: set the default MPA version to 2

This enables ORD/IRD negotiation and its about time to enable it by
default

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iser: Limit sgs to the device fastreg depth

Currently the sg tablesize, which dictates fast register page list
depth to use, does not take into account the limits of the rdma device.
So adjust it once we discover the device fastreg max depth limit. Also
adjust the max_sectors based on the resulting sg tablesize.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Remove dead code from alloc_cached_mr()

The only place that assigns mr inside the loop already does a break.
So "if (mr)" will never be true here since the function initializes mr
to NULL at the top. We can just drop the extra if and break here.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Acked-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Change lkey table allocation to support more MRs

The lkey table is allocated with with a get_user_pages() with an
order based on a number of index bits from a module parameter.

The underlying kernel code cannot allocate that many contiguous pages.

There is no reason the underlying memory needs to be physically
contiguous.

This patch:
- switches the allocation/deallocation to vmalloc/vfree
- caps the number of bits to 23 to insure at least 1 generation bit
o this matches the module parameter description

Cc: stable@vger.kernel.org
Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

mlx5: Expose correct page_size_cap in device attributes

Should be all the page sizes that are supported by the
device.

Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

mlx5: Fix missing device local_dma_lkey

The mlx5 driver exposes device capability IB_DEVICE_LOCAL_DMA_LKEY
but does not set the the device local_dma_lkey. This breaks
rpcrdma drivers.

Query and set this lkey when creating the device resources.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Linux 4.2-rc8

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"A couple of major (hang and deadlock) fixes with fortunately fairly
  rare triggering conditions.  The PM oops is only really triggered by
  people using enclosure services (rare) and the fnic driver is mostly
  used in enterprise environments"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  SCSI: Fix NULL pointer dereference in runtime PM
  fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS bug fixes from Ralf Baechle:
"Two more fixes for 4.2.

  One fixes a build issue with the LLVM assembler - LLVM assembler macro
  names are case sensitive, GNU as macro names are insensitive; the
  other corrects a license string (GPL v2, not GPLv2) such that the
  module loader will recognice the license correctly"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  FIRMWARE: bcm47xx_nvram: Fix module license.
  MIPS: Fix LLVM build issue.

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull 9p regression fix from Al Viro:
"Fix for breakage introduced when switching p9_client_{read,write}() to
struct iov_iter * (went into 4.1)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: ensure err is initialized to 0 in p9_client_read/write

9p: ensure err is initialized to 0 in p9_client_read/write

Some use of those functions were providing unitialized values to those
functions. Notably, when reading 0 bytes from an empty file on a 9P
filesystem, the return code of read() was not 0.

Tested with this simple program:

    #include <assert.h>
    #include <sys/types.h>
    #include <sys/stat.h>
    #include <fcntl.h>
    #include <unistd.h>

    int main(int argc, const char **argv)
    {
        assert(argc == 2);
        char buffer[256];
        int fd = open(argv[1], O_RDONLY|O_NOCTTY);
        assert(fd >= 0);
        assert(read(fd, buffer, 0) == 0);
        return 0;
    }

Cc: stable@vger.kernel.org # v4.1
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"Another couple of small ARM fixes.

  A patch from Masahiro Yamada who noticed that "make -jN all zImage"
  would end up generating bad images where N > 1, and a patch from
  Nicolas to fix the Marvell CPU user access optimisation code when page
  faults are disabled"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8418/1: add boot image dependencies to not generate invalid images
  ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Various low level fixes: fix more fallout from the FPU rework and the
  asm entry code rework, plus an MSI rework fix, and an idle-tracing fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/math-emu: Fix crash in fork()
  x86/fpu/math-emu: Fix math-emu boot crash
  x86/idle: Restore trace_cpu_idle to mwait_idle() calls
  x86/irq: Build correct vector mapping for multiple MSI interrupts
  Revert "sched/x86_64: Don't save flags on context switch"

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Show backtrace when handling a SIGSEGV on --stdio mode
  perf tools: Fix buildid processing
  perf tools: Make fork event processing more resilient
  perf tools: Avoid deadlock when map_groups are broken

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
"A series of small fixlets for a regression visible on OMAP devices
  caused by the conversion of the OMAP interrupt chips to hierarchical
  interrupt domains.  Mostly one liners on the driver side plus a small
  helper function in the core to avoid open coded mess in the drivers"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/crossbar: Restore set_wake functionality
  irqchip/crossbar: Restore the mask on suspend behaviour
  ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism
  irqchip/crossbar: Restore the irq_set_type() mechanism
  genirq: Introduce irq_chip_set_type_parent() helper
  genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
"Two minimalistic fixes for 4.2 regressions:

   - Eric fixed a thinko in the timer_list base switching code caused by
     the overhaul of the timer wheel.  It can cause a cpu to see the
     wrong base for a timer while we move the timer around.

   - Guenter fixed a regression for IMX if booted w/o device tree, where
     the timer interrupt is not initialized and therefor the machine
     fails to boot"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/imx: Fix boot with non-DT systems
  timer: Write timer->flags atomically

x86/fpu/math-emu: Fix crash in fork()

During later stages of math-emu bootup the following crash triggers:

math_emulate: 0060:c100d0a8
Kernel panic - not syncing: Math emulation needed in kernel
CPU: 0 PID: 1511 Comm: login Not tainted 4.2.0-rc7+ #1012
[...]
Call Trace:
  [<c181d50d>] dump_stack+0x41/0x52
  [<c181c918>] panic+0x77/0x189
  [<c1003530>] ? math_error+0x140/0x140
  [<c164c2d7>] math_emulate+0xba7/0xbd0
  [<c100d0a8>] ? fpu__copy+0x138/0x1c0
  [<c1109c3c>] ? __alloc_pages_nodemask+0x12c/0x870
  [<c136ac20>] ? proc_clear_tty+0x40/0x70
  [<c136ac6e>] ? session_clear_tty+0x1e/0x30
  [<c1003530>] ? math_error+0x140/0x140
  [<c1003575>] do_device_not_available+0x45/0x70
  [<c100d0a8>] ? fpu__copy+0x138/0x1c0
  [<c18258e6>] error_code+0x5a/0x60
  [<c1003530>] ? math_error+0x140/0x140
  [<c100d0a8>] ? fpu__copy+0x138/0x1c0
  [<c100c205>] arch_dup_task_struct+0x25/0x30
  [<c1048cea>] copy_process.part.51+0xea/0x1480
  [<c115a8e5>] ? dput+0x175/0x200
  [<c136af70>] ? no_tty+0x30/0x30
  [<c1157242>] ? do_vfs_ioctl+0x322/0x540
  [<c104a21a>] _do_fork+0xca/0x340
  [<c1057b06>] ? SyS_rt_sigaction+0x66/0x90
  [<c104a557>] SyS_clone+0x27/0x30
  [<c1824a80>] sysenter_do_call+0x12/0x12

The reason is the incorrect assumption in fpu_copy(), that FNSAVE
can be executed from math-emu kernels as well.

Don't try to copy the registers, the soft state will be copied
by fork anyway, so the child task inherits the parent task's
soft math state.

With this fix applied math-emu kernels boot up fine on modern
hardware and the 'no387 nofxsr' boot options.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/fpu/math-emu: Fix math-emu boot crash

On a math-emu bootup the following crash occurs:

Initializing CPU#0
------------[ cut here ]------------
kernel BUG at arch/x86/kernel/traps.c:779!
invalid opcode: 0000 [#1] SMP
[...]
EIP is at do_device_not_available+0xe/0x70
[...]
Call Trace:
[<c18238e6>] error_code+0x5a/0x60
[<c1002bd0>] ? math_error+0x140/0x140
[<c100bbd9>] ? fpu__init_cpu+0x59/0xa0
[<c1012322>] cpu_init+0x202/0x330
[<c104509f>] ? __native_set_fixmap+0x1f/0x30
[<c1b56ab0>] trap_init+0x305/0x346
[<c1b548af>] start_kernel+0x1a5/0x35d
[<c1b542b4>] i386_start_kernel+0x82/0x86

The reason is that in the following commit:

b1276c48e91b ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()")

I failed to consider math-emu's limitation that it cannot execute the
FNINIT instruction in kernel mode.

The long term fix might be to allow math-emu to execute (certain) kernel
mode FPU instructions, but for now apply the safe (albeit somewhat ugly)
fix: initialize the emulation state explicitly without trapping out to
the FPU emulator.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Add hch to .get_maintainer.ignore

While the idea behind get_maintainer seems highly useful it's
unfortunately way to trigger happy to grab people that once had a few
commits to files. For someone like me who does a lot of tree-wide API
work that leads to an incredible amount of Cc spam.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make page pfmemalloc check more robust

Commit c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") added
checks for page->pfmemalloc to __skb_fill_page_desc():

        if (page->pfmemalloc && !page->mapping)
                skb->pfmemalloc = true;

It assumes page->mapping == NULL implies that page->pfmemalloc can be
trusted.  However, __delete_from_page_cache() can set set page->mapping
to NULL and leave page->index value alone.  Due to being in union, a
non-zero page->index will be interpreted as true page->pfmemalloc.

So the assumption is invalid if the networking code can see such a page.
And it seems it can.  We have encountered this with a NFS over loopback
setup when such a page is attached to a new skbuf.  There is no copying
going on in this case so the page confuses __skb_fill_page_desc which
interprets the index as pfmemalloc flag and the network stack drops
packets that have been allocated using the reserves unless they are to
be queued on sockets handling the swapping which is the case here and
that leads to hangs when the nfs client waits for a response from the
server which has been dropped and thus never arrive.

The struct page is already heavily packed so rather than finding another
hole to put it in, let's do a trick instead.  We can reuse the index
again but define it to an impossible value (-1UL).  This is the page
index so it should never see the value that large.  Replace all direct
users of page->pfmemalloc by page_is_pfmemalloc which will hide this
nastiness from unspoiled eyes.

The information will get lost if somebody wants to use page->index
obviously but that was the case before and the original code expected
that the information should be persisted somewhere else if that is
really needed (e.g.  what SLAB and SLUB do).

[akpm@linux-foundation.org: fix blooper in slub]
Fixes: c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.com>
Debugged-by: Jiri Bohac <jbohac@suse.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pci-v4.2-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
"These are fixes for ASPM-related NULL pointer dereference crashes on
  Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on
  PA-RISC.  These are both caused by things we merged in the v4.2 merge
  window.  Details:

  Resource management
    - Don't use 64-bit bus addresses on PA-RISC

  Miscellaneous
    - Tolerate hierarchies with no Root Port"

* tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Don't use 64-bit bus addresses on PA-RISC
  PCI: Tolerate hierarchies with no Root Port

Merge tag 'media/v4.2-3' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

- a regression fix at the videobuf2 core driver

- fix error handling at mantis probing code

- revert the IR encode patches, as the API is not mature enough.
   So, better to postpone the changes to a latter Kernel

- fix Kconfig breakages on some randconfig scenarios.

* tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] mantis: Fix error handling in mantis_dma_init()
  Revert "[media] rc: rc-ir-raw: Add scancode encoder callback"
  Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper"
  Revert "[media] rc: ir-rc5-decoder: Add encode capability"
  Revert "[media] rc: ir-rc6-decoder: Add encode capability"
  Revert "[media] rc: rc-core: Add support for encode_wakeup drivers"
  Revert "[media] rc: rc-loopback: Add loopback of filter scancodes"
  Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback"
  [media] vb2: Fix compilation breakage when !CONFIG_BUG
  [media] vb2: Only requeue buffers immediately once streaming is started
  [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled
  [media] media/dvb: fix ts2020.c Kconfig and build

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input layer fix from Dmitry Torokhov:
"A small fixup to gpio_keys_polled driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gpio_keys_polled - request GPIO pin as input.

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"A bunch of i915 fixes, one revert a VBT fix that was a bit premature,
  and some braswell feature removal that the hw actually didn't support.

  One radeon race fix at boot, and one hlcdc build fix, one fix from
  Russell that fixes build as well with new audio features.

  This is hopefully all I have until -next"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: fix hotplug race at startup
  drm/edid: add function to help find SADs
  drm/i915: Avoid TP3 on CHV
  drm/i915: remove HBR2 from chv supported list
  Revert "drm/i915: Add eDP intermediate frequencies for CHV"
  Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
  drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
  drm/i915: Flag the execlists context object as dirty after every use

drm/radeon: fix hotplug race at startup

We apparantly get a hotplug irq before we've initialised
modesetting,

[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111
Hardware name: MicroLink /D850MV , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000
EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe
ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0
Stack:
f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
[<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
[<c125f162>] ? mutex_lock+0x9/0xa
[<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
[<c1034741>] ? process_one_work+0xfc/0x194
[<c1034b58>] ? worker_thread+0x18d/0x218
[<c10349cb>] ? rescuer_thread+0x1d5/0x1d5
[<c103742a>] ? kthread+0x7b/0x80
[<c12601c0>] ? ret_from_kernel_thread+0x20/0x30
[<c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63

Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel into drm-fixes

Revert of a VBT parsing commit that should've been queued for drm-next,
not v4.2. The revert unbreaks Braswell among other things.

Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency
support. The code was optimistically added based on incorrect
documentation; the platform does not support them. These are cc: stable.

Finally a gpu state fix from Chris, also cc: stable.

* tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Avoid TP3 on CHV
  drm/i915: remove HBR2 from chv supported list
  Revert "drm/i915: Add eDP intermediate frequencies for CHV"
  Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
  drm/i915: Flag the execlists context object as dirty after every use

Merge tag 'pm+acpi-4.2-rc8' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
  leak in the Exynos cpufreq driver.

  Specifics:

   - Fix a recently introduced issue in the ACPI backlight code which
     causes lockdep to complain about a circular lock dependency during
     initialization (Hans de Goede).

   - Fix a possible memory during initialization in the Exynos cpufreq
     driver (Shailendra Verma)"

* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match
  ACPI / video: Fix circular lock dependency issue in the video-detect code

Merge branches 'acpi-video' and 'cpufreq-fixes'

* acpi-video:
ACPI / video: Fix circular lock dependency issue in the video-detect code

* cpufreq-fixes:
cpufreq: exynos: Fix for memory leak in case SoC name does not match

PCI: Don't use 64-bit bus addresses on PA-RISC

Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t")
caused HPMCs on A500 and hangs on rp5470.

PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so
prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After
3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and
apparently there's some PA-RISC problem related to them.

Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t")
Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Based-on-idea-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
CC: stable@vger.kernel.org # v3.19+

x86/idle: Restore trace_cpu_idle to mwait_idle() calls

Commit b253149b843f ("sched/idle/x86: Restore mwait_idle() to fix boot
hangs, to improve power savings and to improve performance") restores
mwait_idle(), but the trace_cpu_idle related calls are missing. This
causes powertop on my old desktop powered by Intel Core2 E6550 to
report zero wakeups and zero events.

Add them back to restore the proper behaviour.

Fixes: b253149b843f ("sched/idle/x86: Restore mwait_idle() to ...")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Cc: <len.brown@intel.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1440046479-4262-1-git-send-email-jszhang@marvell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Out of bounds array access in 802.11 minstrel code, from Adrien
    Schildknecht.

2) Don't use skb_get() in IGMP/MLD code paths, as this makes
    pskb_may_pull() BUG.  From Linus Luessing.

3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.

4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.

5) Fix ppp device deregistration wrt.  netns deletion, from Guillaume
    Nault.

6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
    Lau.

7) Fix memory leak in batman-adv code, from Sven Eckelmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  batman-adv: Fix memory leak on tt add with invalid vlan
  net: phy: fix semicolon.cocci warnings
  net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
  be2net: avoid vxlan offloading on multichannel configs
  ipv6: Fix a potential deadlock when creating pcpu rt
  ipv6: Add rt6_make_pcpu_route()
  ipv6: Remove un-used argument from ip6_dst_alloc()
  net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
  net: ethernet: micrel: fix an error code
  ppp: fix device unregistration upon netns deletion
  net: phy: fix PHY_RUNNING in phy_state_machine
  Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
  inet: fix potential deadlock in reqsk_queue_unlink()
  gianfar: Restore link state settings after MAC reset
  ipv4: off-by-one in continuation handling in /proc/net/route
  net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
  mac80211: fix invalid read in minstrel_sort_best_tp_rates()

Merge tag 'for-linus-4.2-rc7-tag' of git://git./linux/kernel/git/xen/tip

Pull xen build fix from David Vrabel:
"Fix i386 build with an (uncommon) configuration"

* tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC

Merge tag 'sound-4.2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Here are a small collecton of sound fix patches.

  The most significant one is the disablement of newly introduced
  topology API.  Its ABI couldn't be stabilized enough, so we decided to
  delay for 4.3 in the end.  Other than that, all oneliner fixes: a
  USB-audio runtime PM fix and a couple of HD-audio quirks"

* tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211)
  ALSA: usb-audio: Fix runtime PM unbalance
  ASoC: topology: Disable use from userspace
  ASoC: topology: Add Kconfig option for topology
  ALSA: hda - Fix the white noise on Dell laptop

Input: gpio_keys_polled - request GPIO pin as input.

GPIOF_IN flag was lost in:
Commit 633a21d80b4a("input: gpio_keys_polled: Add support for GPIO
descriptors").

Without this flag, legacy code path (for non-descriptor GPIO declarations)
would configure GPIO as output (0 meaning GPIOF_DIR_OUT | GPIOF_INIT_LOW).

Cc: stable@vger.kernel.org
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
"This contains a v4.2-rc specific RCU module unload regression bug-fix,
  a long-standing iscsi-target bug-fix for duplicate target_xfer_tags
  during NOP processing from Alexei, and two more small REPORT_LUNs
  emulation related patches to make Solaris FC host LUN scanning happy
  from Roland.

  There is also one patch not included that allows target-core to limit
  the number of fabric driver SGLs per I/O request using residuals, that
  is currently required as a work-around for FC hosts which don't honor
  EVPD block-limits settings.  At this point, it will most likely become
  for-next material"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix handling of small allocation lengths in REPORT LUNS
  target: REPORT LUNS should return LUN 0 even for dynamic ACLs
  target/iscsi: Fix double free of a TUR followed by a solicited NOPOUT
  target: Perform RCU callback barrier before backend/fabric unload

Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal fixes from Eduardo Valentin:
"Last minute fixes on the thermal-soc tree.  There is a fix of a long
  lasting bug in cpu cooling device, thanks for RMK for being pushing
  this"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal/cpu_cooling: update policy limits if clipped_freq < policy->max
  thermal/cpu_cooling: rename max_freq as clipped_freq in notifier
  thermal/cpu_cooling: rename cpufreq_val as clipped_freq
  thermal/cpu_cooling: convert 'switch' block to 'if' block in notifier
  thermal/cpu_cooling: quit early after updating policy
  thermal/cpu_cooling: No need to initialize max_freq to 0
  thermal: cpu_cooling: fix lockdep problems in cpu_cooling
  thermal: power_allocator: do not use devm* interfaces

clocksource/imx: Fix boot with non-DT systems

Commit 6dd747825b20 ("ARM: imx: move timer resources into a structure")
moved initialization parameters into a data structure, but neglected to set
the irq field in that data structure for non-DT boots. This causes the system
to hang if a non-DT boot is attempted.

Fixes: 6dd747825b20 ("ARM: imx: move timer resources into a structure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1440066441-13930-1-git-send-email-linux@roeck-us.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC

Since commit feb44f1f7a4ac299d1ab1c3606860e70b9b89d69 (x86/xen:
Provide a "Xen PV" APIC driver to support >255 VCPUs) Xen guests need
a full APIC driver and thus should depend on X86_LOCAL_APIC.

This fixes an i386 build failure with !SMP && !CONFIG_X86_UP_APIC by
disabling Xen support in this configuration.

Users needing Xen support in a non-SMP i386 kernel will need to enable
CONFIG_X86_UP_APIC.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: <stable@vger.kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  - Fix buildid processing done at the end of a 'perf record' session, a
    problem that happened in workloads involving lots of small short-lived
    processes.  That code was not asking the perf_session layer to order
    the events.

    Make the code more robust to handle some of the problems with such
    out-of-order events and fix 'perf record' to ask for ordered events
    on systems where we have perf_event_attr.sample_id_all.  (Adrian Hunter)

  - Show backtrace when handling a SIGSEGV in 'perf top --stdio' (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

drm/edid: add function to help find SADs

Add a function to find the start of the SADs in the ELD. This
complements the helper to retrieve the SAD count.

[airlied: this fixes a build problem with the alsa eld helper
which required this].

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-atmel-hlcdc-fixes' of https://github.com/bbrezillon/linux-at91 into drm-fixes

single atmel hlcdc fix.

* 'drm-atmel-hlcdc-fixes' of https://github.com/bbrezillon/linux-at91:
drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only

irqchip/crossbar: Restore set_wake functionality

The TI crossbar irqchip doesn't provides any facility to configure the
wakeup sources, but the conversion to hierarchical irqdomains set the
irq_set_wake callback to irq_chip_set_wake_parent. The parent chip
(OMAP wakeupgen) has no irq_set_wake function either so the call will
fail with -ENOSYS. As a result the irq_set_wake() call in the resume
path will trigger an 'Unbalanced wake disable' warning.

Before the conversion the GIC irqchip was the top level irqchip and
correctly flagged with IRQCHIP_SKIP_SET_WAKE.

Restore the correct behaviour by removing the irq_set_type callback
from the crossbar irqchip and set the IRQCHIP_SKIP_SET_WAKE flag which
lets the irq_set_irq_wake() call from the driver succeed.

[ tglx: Massaged changelog ]

Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-7-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

irqchip/crossbar: Restore the mask on suspend behaviour

The ARM GIC requires that all interrupts which are not used as a
wakeup source have to be masked during suspend.

The conversion of the crossbar irqchip to hierarchical irq domains
failed to mark the crossbar irqchip with the IRQCHIP_MASK_ON_SUSPEND
flag and therefor broke the suspend requirement of the GIC.

Before the conversion the flags were visible because the GIC was the
top level irqchip. After the conversion the crossbar irqchip is the
top level irq chip whose flags are evaluated in suspend_device_irq().
As the flag is not set the masking of the non-wakeup irqs is not
invoked which breaks suspend.

Add the IRQCHIP_MASK_ON_SUSPEND flag to the crossbar irqchip, so the
GIC interrupts get masked properly.

[ tglx: Massaged changelog ]

Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-6-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism

The conversion of the wakeupgen irqchip to hierarchical irq domains
failed to provide a mechanism to properly set the trigger type of an
interrupt.

The wakeupgen irq chip itself has no mechanism and therefor no
irq_set_type() callback. The code before the conversion relayed the
trigger configuration directly to the underlying GIC.

Restore the correct behaviour by setting the wakeupgen irq_set_type
callback to irq_chip_set_type_parent(). This propagates the
set_trigger() call to the underlying GIC irqchip.

[ tglx: Massaged changelog ]

Fixes: 7136d457f365 ('ARM: omap: convert wakeupgen to stacked domains')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-5-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

irqchip/crossbar: Restore the irq_set_type() mechanism

The conversion of the crossbar irqchip to hierarchical irq domains
failed to provide a mechanism to properly set the trigger type of an
interrupt.

The crossbar irq chip itself has no mechanism and therefor no
irq_set_type() callback. The code before the conversion relayed the
trigger configuration directly to the underlying GIC.

Restore the correct behaviour by setting the crossbar irq_set_type
callback to irq_chip_set_type_parent(). This propagates the
set_trigger() call to the underlying GIC irqchip.

[ tglx: Massaged changelog ]

Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-4-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

genirq: Introduce irq_chip_set_type_parent() helper

This helper is required for irq chips which do not implement a
irq_set_type callback and need to call down the irq domain hierarchy
for the actual trigger type change.

This helper is required to fix further wreckage caused by the
conversion of TI OMAP to hierarchical irq domains and therefor tagged
for stable.

[ tglx: Massaged changelog ]

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy

irq_chip_retrigger_hierarchy() returns -ENOSYS if it was not able to
find at least one .irq_retrigger() callback implemented in the IRQ
domain hierarchy.

That's wrong, because check_irq_resend() expects a 0 return value from
the callback in case that the hardware assisted resend was not
possible. If the return value is non zero the core code assumes
hardware resend success and the software resend is not invoked.

This results in lost interrupts on platforms where none of the parent
irq chips in the hierarchy implements the retrigger callback.

This is observable on TI OMAP, where the hierarchy is:

ARM GIC <- OMAP wakeupgen <- TI Crossbar

Return 0 instead so the software resend mechanism gets invoked.

[ tglx: Massaged changelog ]

Fixes: 85f08c17de26 ('genirq: Introduce helper functions...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-2-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

PCI: Tolerate hierarchies with no Root Port

We should not assume any particular hardware topology.  Commit d0751b98dfa3
("PCI: Add dev->has_secondary_link to track downstream PCIe links") relied
on the assumption that every PCIe hierarchy is rooted at a Root Port.  But
we can't rely on any assumption about what hardware we will find; we just
have to deal with the world as it is.

On some platforms, PCIe devices (endpoints, switch upstream ports, etc.)
appear directly on the root bus, and there is no Root Port in the PCI bus
hierarchy.  For example, Meelis observed these top-level devices on a
Sparc V245:

  0000:02:00.0 PCI bridge to [bus 03-0d]    Switch Upstream Port
  0001:02:00.0 PCI bridge to [bus 03]       PCIe to PCI/PCI-X Bridge

These devices *look* like they have links going upstream, but there really
are no upstream devices.

In set_pcie_port_type(), we used the parent device to figure out which side
of a switch port has a link, so if the parent device did not exist, we
dereferenced a NULL parent pointer.

Check whether the parent device exists before dereferencing it.

Meelis observed this oops on Sparc V245 and T2000.  Ben Herrenschmidt says
this is also possible on IBM PowerVM guests on PowerPC.

[bhelgaas: changelog, comment]
Link: http://lkml.kernel.org/r/alpine.LRH.2.20.1508122118210.18637@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David S. Miller <davem@davemloft.net>

perf top: Show backtrace when handling a SIGSEGV on --stdio mode

It was just freezing instead of informing about the SEGV, fix it and
also print a backtrace, just like in the TUI mode and in 'perf trace'.

Tested by provoking a NULL deref when pressing 'z':

     0.31%  libc-2.20.so     [.] malloc_consolidate
     0.31%  ld-2.20.so       [.] _dl_relocate_object
     0.28%  cc1              [.] ht_lookup
     0.28%  cc1              [.] ira_init_register_move_cost
  perf: Segmentation fault
  Obtained 7 stack frames.
  perf(dump_stack+0x32) [0x4d69f2]
  perf(sighandler_dump_stack+0x29) [0x4d6a89]
  /lib64/libc.so.6(+0x34960) [0x7f5064333960]
  perf() [0x438790]
  /lib64/libpthread.so.0(+0x752a) [0x7f50663dd52a]
  /lib64/libc.so.6(clone+0x6d) [0x7f50643ff22d]
  #

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pewrpzqd29rgmhu2wkk7fhww@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix buildid processing

After recording, 'perf record' post-processes the data to determine
which buildids are needed.

That processing must process the data in time order, if possible,
because otherwise dependent events, like forks and mmaps, will not make
sense.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-4-git-send-email-adrian.hunter@intel.com
[ Moved the sample_id_add to after trying to open the events, use pr_warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Make fork event processing more resilient

When processing a fork event, the tools lookup the parent thread by its
tid. In a couple of cases, it is possible for that thread to have the
wrong pid.

That can happen if the data is being processed out of order, or if the
(fork) event that would have removed the erroneous thread was lost.

Assume the latter case, print a dump message, remove the erroneous
thread, create a new one with the correct pid, and keep going.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Avoid deadlock when map_groups are broken

Attempting to clone map groups onto themselves will deadlock.

It only happens because of other bugs, but the code should protect
itself anyway.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439994561-27436-2-git-send-email-adrian.hunter@intel.com
[ Use pr_debug() instead of dump_fprintf() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'asoc-v4.2-disable-topology' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Disable topology support for v4.2

The topology code merged in the v4.2 merge window introduced a new ABI
which was believed to be suitable for use but subsequently additional
work by the developers of this feature have revealed some problems that
need to be addressed. In order to allow this to be done without having
to support the initial ABI add Kconfig to disable the build and also add
some #error statements to the UAPI header so users can't use them.

FIRMWARE: bcm47xx_nvram: Fix module license.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11020/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211)

Tested with W541 and Ultra Dock 170w

Signed-off-by: Rick Sherman <rick@shermdog.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Fix runtime PM unbalance

The fix for deadlock in PM in commit [1ee23fe07ee8: ALSA: usb-audio:
Fix deadlocks at resuming] introduced a new check of in_pm flag.
However, the brainless patch author evaluated it in a wrong way
(logical AND instead of logical OR), thus usb_autopm_get_interface()
is wrongly called at probing, leading to unbalance of runtime PM
refcount.

This patch fixes it by correcting the logic.

Reported-by: Hans Yang <hansy@nvidia.com>
Fixes: 1ee23fe07ee8 ('ALSA: usb-audio: Fix deadlocks at resuming')
Cc: <stable@vger.kernel.org> [v3.15+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[media] mantis: Fix error handling in mantis_dma_init()

Current code assigns 0 to variable 'err', which makes mantis_dma_init()
to return success even if mantis_alloc_buffers() fails.

Fix it by checking the return value from mantis_alloc_buffers() and
propagating it in the case of error.

Reported-by: RUC_Soft_Sec <zy900702@163.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Revert "[media] rc: rc-ir-raw: Add scancode encoder callback"

This reverts commit 9869da5bacc5c9b865a183bd36c04be76cdd325d.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper"

This reverts commit 1d971d927efa2e10194c96ed0475b6d6054342d8.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Revert "[media] rc: ir-rc5-decoder: Add encode capability"

This reverts commit a0466f15b4654cf1ac9e387d7c1a401eff494b4f.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Revert "[media] rc: ir-rc6-decoder: Add encode capability"

This reverts commit cf257e288ad3a134d4bb809c542a3ae6c87ddfa3.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Revert "[media] rc: rc-core: Add support for encode_wakeup drivers"

This reverts commit 0d830b2d1295fee82546d57185da5a6604f11ae2.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Revert "[media] rc: rc-loopback: Add loopback of filter scancodes"

This reverts commit 2e4ebde269236da2a41183522127715b6d9d80ce.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback"

This reverts commit da7ee60b03bd66bb10974d7444aa444de6391312.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drm/i915: Avoid TP3 on CHV

This patch removes TP3 support on CHV since there is no support
for HBR2 on this platform.

v2: rename the function to indicate it checks source rates (Jani)
v3: update comment to indicate TP3 dependency on HBR2 supported
hardware (Jani)

Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
[Jani: fixed a couple of checkpatch warnings.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: remove HBR2 from chv supported list

This patch removes 5.4Gbps from supported link rate for CHV since
it is not supported in it.

v2: change the ordering for better readability (Ville)

Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Revert "drm/i915: Add eDP intermediate frequencies for CHV"

This reverts
commit fe51bfb95c996733150c44d21e1c9f4b6322a326.
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu Mar 12 17:10:38 2015 +0200

CHV does not support intermediate frequencies so reverting the
patch that added it in the first place

Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'x86/asm/urgent' to pick up an entry code fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Revert "drm/i915: Allow parsing of variable size child device entries from VBT"

This reverts

commit 047fe6e6db9161e69271f56daaafdaf2add023b1
Author: David Weinehall <david.weinehall@linux.intel.com>
Date: Tue Aug 4 16:55:52 2015 +0300

drm/i915: Allow parsing of variable size child device entries from VBT

That commit is not valid for v4.2, however it will be valid for v4.3. It
was simply queued too early.

The referenced regressing commit is just fine until the size of struct
common_child_dev_config changes, and that won't happen until
v4.3. Indeed, the expected size checks here rely on the increased size
of the struct, breaking new platforms.

Fixes: 047fe6e6db91 ("drm/i915: Allow parsing of variable size child device entries from VBT")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

target: Fix handling of small allocation lengths in REPORT LUNS

REPORT LUNS should not fail just because the allocation length is less
than 16.  The relevant section of SPC-4 is:

  4.2.5.6 Allocation length

  The ALLOCATION LENGTH field specifies the maximum number of bytes or
  blocks that an application client has allocated in the Data-In
  Buffer. The ALLOCATION LENGTH field specifies bytes unless a
  different requirement is stated in the command definition.

  An allocation length of zero specifies that no data shall be
  transferred. This condition shall not be considered an error.

So we should just truncate our response rather than return an error.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

batman-adv: Fix memory leak on tt add with invalid vlan

The object tt_local is allocated with kmalloc and not initialized when the
function batadv_tt_local_add checks for the vlan. But this function can
only cleanup the object when the (not yet initialized) reference counter of
the object is 1. This is unlikely and thus the object would leak when the
vlan could not be found.

Instead the uninitialized object tt_local has to be freed manually and the
pointer has to set to NULL to avoid calling the function which would try to
decrement the reference counter of the not existing object.

CID: 1316518
Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'dmaengine-fix-4.2-rc8' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fix from Vinod Koul:
"We recently found issue with dma_request_slave_channel() API causing
privatecnt value to go bad. This is fixed by balancing the privatecnt"

* tag 'dmaengine-fix-4.2-rc8' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: fix balance of privatecnt inc/dec operations

ASoC: topology: Disable use from userspace

Since the topology API is still in sufficient flux for changes to be
identified disable the use of the userspace ABI by adding #error
statements to the code, ensuring that nobody relies on the headers as
currently defined. It is expected that this change will be reverted for
v4.3.

Signed-off-by: Mark Brown <broonie@kernel.org>

x86/irq: Build correct vector mapping for multiple MSI interrupts

Alex Deucher, Mark Rustad and Alexander Holler reported a regression
with the latest v4.2-rc4 kernel, which breaks some SATA controllers.
With multi-MSI capable SATA controllers, only the first port works,
all other ports time out when executing SATA commands.

This happens because the first argument to assign_irq_vector_policy()
is always the base linux irq number of the multi MSI interrupt block,
so all subsequent vector assignments operate on the base linux irq
number, so all MSI irqs are handled as the first irq number. Therefor
the other MSI irqs of a device are never set up correctly and never
fire.

Add the loop iterator to the base irq number so all vectors are
assigned correctly.

Fixes: b5dc8e6c21e7 "x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors"
Reported-and-tested-by: Alex Deucher <alexdeucher@gmail.com>
Reported-and-tested-by: Mark Rustad <mrustad@gmail.com>
Reported-and-tested-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1439911228-9880-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

SCSI: Fix NULL pointer dereference in runtime PM

The routines in scsi_rpm.c assume that if a runtime-PM callback is
invoked for a SCSI device, it can only mean that the device's driver
has asked the block layer to handle the runtime power management (by
calling blk_pm_runtime_init(), which among other things sets q->dev).

However, this assumption turns out to be wrong for things like the ses
driver.  Normally ses devices are not allowed to do runtime PM, but
userspace can override this setting.  If this happens, the kernel gets
a NULL pointer dereference when blk_post_runtime_resume() tries to use
the uninitialized q->dev pointer.

This patch fixes the problem by calling the block layer's runtime-PM
routines only if the device's driver really does have a runtime-PM
callback routine.  Since ses doesn't define any such callbacks, the
crash won't occur.

This fixes Bugzilla #101371.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stanisław Pitucha <viraptor@gmail.com>
Reported-by: Ilan Cohen <ilanco@gmail.com>
Tested-by: Ilan Cohen <ilanco@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>

fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack

We added changes in fnic driver patch 1.6.0.16 to acquire
io_req_lock in fnic_queuecommand() before issuing I/O so that io completion
is serialized. But when releasing the lock we check for the I/O flag and
this could be modified if IO abort occurs before I/O completion. In this case
we wont release the lock and causes deadlock in some scenerios. Using the
local variable to check the IO lock status will resolve the problem.

Fixes: 41df7b02db82cf6c14f094757bac3830d10a827f
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"These came in late last week, I wanted to look over the mst one before
  forwarding, but it seems good.

  Just three i915 and one MST fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Commit planes on each crtc separately.
  drm/i915: calculate primary visibility changes instead of calling from set_config
  drm/i915: Only dither on 6bpc panels
  drm/dp/mst: Remove port after removing connector.

timer: Write timer->flags atomically

lock_timer_base() cannot prevent the following :

CPU1 ( in __mod_timer()
timer->flags |= TIMER_MIGRATING;
spin_unlock(&base->lock);
base = new_base;
spin_lock(&base->lock);
// The next line clears TIMER_MIGRATING
timer->flags &= ~TIMER_BASEMASK;
                                  CPU2 (in lock_timer_base())
                                  see timer base is cpu0 base
                                  spin_lock_irqsave(&base->lock, *flags);
                                  if (timer->flags == tf)
                                       return base; // oops, wrong base
timer->flags |= base->cpu // too late

We must write timer->flags in one go, otherwise we can fool other cpus.

Fixes: bc7a34b8b9eb ("timer: Reduce timer migration overhead if disabled")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Christopherson <jon@jons.org>
Cc: David Miller <davem@davemloft.net>
Cc: xen-devel@lists.xen.org
Cc: david.vrabel@citrix.com
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Link: http://lkml.kernel.org/r/1439831928.32680.11.camel@edumazet-glaptop2.roam.corp.google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>

ARM: 8418/1: add boot image dependencies to not generate invalid images

U-Boot is often used to boot the kernel on ARM boards, but uImage
is not built by "make all", so we are often inclined to do
"make all uImage" to generate DTBs, modules and uImage in a single
command, but we should notice a pitfall behind it.  In fact,
"make all uImage" could generate an invalid uImage if it is run with
the parallel option (-j).

You can reproduce this problem with the following procedure:

[1] First, build "all" and "uImage" separately.
    You will get a valid uImage

  $ git clean -f -x -d
  $ export CROSS_COMPILE=<your-tools-prefix>
  $ make -s -j8 ARCH=arm multi_v7_defconfig
  $ make -s -j8 ARCH=arm all
  $ make -j8 ARCH=arm UIMAGE_LOADADDR=0x80208000 uImage
    CHK     include/config/kernel.release
    CHK     include/generated/uapi/linux/version.h
    CHK     include/generated/utsrelease.h
  make[1]: `include/generated/mach-types.h' is up to date.
    CHK     include/generated/timeconst.h
    CHK     include/generated/bounds.h
    CHK     include/generated/asm-offsets.h
    CALL    scripts/checksyscalls.sh
    CHK     include/generated/compile.h
    Kernel: arch/arm/boot/Image is ready
    Kernel: arch/arm/boot/zImage is ready
    UIMAGE  arch/arm/boot/uImage
  Image Name:   Linux-4.2.0-rc5-00156-gdd2384a-d
  Created:      Sat Aug  8 23:21:35 2015
  Image Type:   ARM Linux Kernel Image (uncompressed)
  Data Size:    6138648 Bytes = 5994.77 kB = 5.85 MB
  Load Address: 80208000
  Entry Point:  80208000
    Image arch/arm/boot/uImage is ready
  $ ls -l arch/arm/boot/*Image
  -rwxrwxr-x 1 masahiro masahiro 13766656 Aug  8 23:20 arch/arm/boot/Image
  -rw-rw-r-- 1 masahiro masahiro  6138712 Aug  8 23:21 arch/arm/boot/uImage
  -rwxrwxr-x 1 masahiro masahiro  6138648 Aug  8 23:20 arch/arm/boot/zImage

[2] Update some source file(s)

  $ touch init/main.c

[3] Then, re-build "all" and "uImage" simultaneously.
    You will get an invalid uImage at random.

  $ make -j8 ARCH=arm UIMAGE_LOADADDR=0x80208000 all uImage
    CHK     include/config/kernel.release
    CHK     include/generated/uapi/linux/version.h
    CHK     include/generated/utsrelease.h
  make[1]: `include/generated/mach-types.h' is up to date.
    CHK     include/generated/timeconst.h
    CHK     include/generated/bounds.h
    CHK     include/generated/asm-offsets.h
    CALL    scripts/checksyscalls.sh
    CC      init/main.o
    CHK     include/generated/compile.h
    LD      init/built-in.o
    LINK    vmlinux
    LD      vmlinux.o
    MODPOST vmlinux.o
    GEN     .version
    CHK     include/generated/compile.h
    UPD     include/generated/compile.h
    CC      init/version.o
    LD      init/built-in.o
    KSYM    .tmp_kallsyms1.o
    KSYM    .tmp_kallsyms2.o
    LD      vmlinux
    SORTEX  vmlinux
    SYSMAP  System.map
    OBJCOPY arch/arm/boot/Image
    Building modules, stage 2.
    Kernel: arch/arm/boot/Image is ready
    GZIP    arch/arm/boot/compressed/piggy.gzip
    AS      arch/arm/boot/compressed/piggy.gzip.o
    Kernel: arch/arm/boot/Image is ready
    LD      arch/arm/boot/compressed/vmlinux
    GZIP    arch/arm/boot/compressed/piggy.gzip
    OBJCOPY arch/arm/boot/zImage
    Kernel: arch/arm/boot/zImage is ready
    UIMAGE  arch/arm/boot/uImage
  Image Name:   Linux-4.2.0-rc5-00156-gdd2384a-d
  Created:      Sat Aug  8 23:23:14 2015
  Image Type:   ARM Linux Kernel Image (uncompressed)
  Data Size:    26472 Bytes = 25.85 kB = 0.03 MB
  Load Address: 80208000
  Entry Point:  80208000
    Image arch/arm/boot/uImage is ready
    MODPOST 192 modules
    AS      arch/arm/boot/compressed/piggy.gzip.o
    LD      arch/arm/boot/compressed/vmlinux
    OBJCOPY arch/arm/boot/zImage
    Kernel: arch/arm/boot/zImage is ready
  $ ls -l arch/arm/boot/*Image
  -rwxrwxr-x 1 masahiro masahiro 13766656 Aug  8 23:23 arch/arm/boot/Image
  -rw-rw-r-- 1 masahiro masahiro    26536 Aug  8 23:23 arch/arm/boot/uImage
  -rwxrwxr-x 1 masahiro masahiro  6138648 Aug  8 23:23 arch/arm/boot/zImage

Please notice the uImage is extremely small when this issue is
encountered.  Besides, "Kernel: arch/arm/boot/zImage is ready" is
displayed twice, before and after the uImage log.

The root cause of this is the race condition between zImage and
uImage.  Actually, uImage depends on zImage, but the dependency
between the two is only described in arch/arm/boot/Makefile.
Because arch/arm/boot/Makefile is not included from the top-level
Makefile, it cannot know the dependency between zImage and uImage.

Consequently, when we run make with the parallel option, Kbuild
updates vmlinux first, and then two different threads descends into
the arch/arm/boot/Makefile almost at the same time, one for updating
zImage and the other for uImage.  While one thread is re-generating
zImage, the other also tries to update zImage before creating uImage
on top of that.  zImage is overwritten by the slower thread and then
uImage is created based on the half-written zImage.

This is the reason why "Kernel: arch/arm/boot/zImage is ready" is
displayed twice, and a broken uImage is created.

The same problem could happen on bootpImage.

This commit adds dependencies among Image, zImage, uImage, and
bootpImage to arch/arm/Makefile, which is included from the
top-level Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage

The mmap semaphore should not be taken when page faults are disabled.
Since pagefault_disable() no longer disables preemption, we now need
to use faulthandler_disabled() in place of in_atomic().

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

MIPS: Fix LLVM build issue.

Matthew Fortune <Matthew.Fortune@imgtec.com> reports:

The genex.S file appears to mix the case of a macro between its definition and
use. A cut down example of this is below. The macro __build_clear_none has
lower case 'build' but ends up being instantiated with upper case BUILD. Can
this be fixed on master. It has been picked up by the LLVM integrated assembler
which is currently case sensitive. We are likely to fix the assembler as well
but the code is currently inconsistent in the kernel.

.macro __build_clear_none
.endm

.macro __BUILD_HANDLER exception handler clear verbose ext
.align 5
.globl handle_\exception; .align 2; .type handle_\exception, @function; .ent
handle_\exception, 0; handle_\exception: .frame $29, 184, $29
.set noat
.globl handle_\exception\ext; .type handle_\exception\ext, @function;
handle_\exception\ext:
__BUILD_clear_\clear
.endm

.macro BUILD_HANDLER exception handler clear verbose
__BUILD_HANDLER \exception \handler \clear \verbose _int
.endm

BUILD_HANDLER ftlb ftlb none silent

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Matthew Fortune <Matthew.Fortune@imgtec.com>

drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only

If PM is enabled but PM_SLEEP is disabled, the suspend/resume functions
are still unused and produce a compiler warning.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> # 4.1+

Revert "sched/x86_64: Don't save flags on context switch"

This reverts commit:

2c7577a75837 ("sched/x86_64: Don't save flags on context switch")

It was a nice speedup. It's also not quite correct: SYSENTER
enables interrupts too early.

We can re-add this optimization once the SYSENTER code is beaten
into shape, which should happen in 4.3 or 4.4.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v3.19
Link: http://lkml.kernel.org/r/85f56651f59f76624e80785a8fd3bdfdd089a818.1439838962.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

ASoC: topology: Add Kconfig option for topology

Allow the topology code to be compiled out so that users who don't need
topology don't need to havve the code compiled in, saving them some
memory.

Some more configuration could be added to remove some of the hooks into
the core data structures but that is probably best done with some
refactoring to use functions to do the updates of the data structures
rather than ifdefing in the code as we'd need to do at the minute.

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma bugfix from Doug Ledford:
"Bugfix in iw_cxgb4"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
iw_cxgb4: gracefully handle unknown CQE status errors

Merge branch 'for-4.2-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"Three minor device-specific fixes and revert of NCQ autosense added
  during this -rc1.

  It turned out that NCQ autosense as currently implemented interferes
  with the usual error handling behavior.  It will be revisited in the
  near future"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  sata_sx4: Check return code from pdc20621_i2c_read()
  Revert "libata: Implement NCQ autosense"
  Revert "libata: Implement support for sense data reporting"
  Revert "libata-eh: Set 'information' field for autosense"
  ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n

Merge branch 'for-4.2-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
"A fix for a subtle bug introduced back during 3.17 cycle which
interferes with setting configurations under specific conditions"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: use trialcs->mems_allowed as a temp variable

net: phy: fix semicolon.cocci warnings

drivers/net/phy/smsc.c:127:3-4: Unneeded semicolon

Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module

This is an HP-branded Sierra Wireless EM7355:
https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: avoid vxlan offloading on multichannel configs

VxLAN offloading is not functional if the NIC is running in multichannel
mode (UMC, FLEX-10, VNIC...). Enabling this additionally kills whole
connectivity through the NIC and the device needs to be down and up to
restore it. The firmware should take care about it and does not allow
the conversion of interface to tunnel type (be_cmd_manage_iface) or should
support VxLAN offloading if multichannel config is enabled.
I have tested this on the latest available firmware (10.6.144.21).

Result:
[root@sm-04 ~]# ip link set enp5s0f0 up[root@sm-04 ~]# ip addr add 172.30.10.50/24 dev enp5s0f0
[root@sm-04 ~]# ping -c 3 172.30.10.254PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.317 ms
64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.187 ms
64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.188 ms

--- 172.30.10.254 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.187/0.230/0.317/0.063 ms
[root@sm-04 ~]# ip link add link enp5s0f0 vxlan10 type vxlan id 10 remote 172.30.10.60 dstport 4789
[root@sm-04 ~]# ip link set vxlan10 up
[ 7900.442811] be2net 0000:05:00.0: Enabled VxLAN offloads for UDP port 4789
[ 7900.455722] be2net 0000:05:00.1: Enabled VxLAN offloads for UDP port 4789
[ 7900.468635] be2net 0000:05:00.2: Enabled VxLAN offloads for UDP port 4789
[ 7900.481553] be2net 0000:05:00.3: Enabled VxLAN offloads for UDP port 4789
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.

--- 172.30.10.254 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 1999ms

[root@sm-04 ~]# ip link set vxlan10 down
[ 7959.434093] be2net 0000:05:00.0: Disabled VxLAN offloads for UDP port 4789
[ 7959.444792] be2net 0000:05:00.1: Disabled VxLAN offloads for UDP port 4789
[ 7959.455592] be2net 0000:05:00.2: Disabled VxLAN offloads for UDP port 4789
[ 7959.466416] be2net 0000:05:00.3: Disabled VxLAN offloads for UDP port 4789
[root@sm-04 ~]# ip link del vxlan10
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.

--- 172.30.10.254 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 1999ms

[root@sm-04 ~]# ip link set enp5s0f0 down
[root@sm-04 ~]# ip link set enp5s0f0 up
[ 8071.019003] be2net 0000:05:00.0 enp5s0f0: Link is Up
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.318 ms
64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.196 ms
64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.194 ms

--- 172.30.10.254 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.194/0.236/0.318/0.057 ms

Cc: Sathya Perla <sathya.perla@avagotech.com>
Cc: Ajit Khaparde <ajit.khaparde@avagotech.com>
Cc: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipv6_percpu_rt_deadlock'

Martin KaFai Lau says:

====================
ipv6: Fix a potential deadlock when creating pcpu rt

v1 -> v2:
A minor change in the commit message of patch 2.

This patch series fixes a potential deadlock when creating a pcpu rt.
It happens when dst_alloc() decided to run gc. Something like this:

read_lock(&table->tb6_lock);
ip6_rt_pcpu_alloc()
=> dst_alloc()
=> ip6_dst_gc()
=> write_lock(&table->tb6_lock); /* oops */

Patch 1 and 2 are some prep works.
Patch 3 is the fix.

Original report: https://bugzilla.kernel.org/show_bug.cgi?id=102291
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Fix a potential deadlock when creating pcpu rt

rt6_make_pcpu_route() is called under read_lock(&table->tb6_lock).
rt6_make_pcpu_route() calls ip6_rt_pcpu_alloc(rt) which then
calls dst_alloc().  dst_alloc() _may_ call ip6_dst_gc() which takes
the write_lock(&tabl->tb6_lock).  A visualized version:

read_lock(&table->tb6_lock);
rt6_make_pcpu_route();
=> ip6_rt_pcpu_alloc();
=> dst_alloc();
=> ip6_dst_gc();
=> write_lock(&table->tb6_lock); /* oops */

The fix is to do a read_unlock first before calling ip6_rt_pcpu_alloc().

A reported stack:

[141625.537638] INFO: rcu_sched self-detected stall on CPU { 27}  (t=60000 jiffies g=4159086 c=4159085 q=2139)
[141625.547469] Task dump for CPU 27:
[141625.550881] mtr             R  running task        0 22121  22081 0x00000008
[141625.558069]  0000000000000000 ffff88103f363d98 ffffffff8106e488 000000000000001b
[141625.565641]  ffffffff81684900 ffff88103f363db8 ffffffff810702b0 0000000008000000
[141625.573220]  ffffffff81684900 ffff88103f363de8 ffffffff8108df9f ffff88103f375a00
[141625.580803] Call Trace:
[141625.583345]  <IRQ>  [<ffffffff8106e488>] sched_show_task+0xc1/0xc6
[141625.589650]  [<ffffffff810702b0>] dump_cpu_task+0x35/0x39
[141625.595144]  [<ffffffff8108df9f>] rcu_dump_cpu_stacks+0x6a/0x8c
[141625.601320]  [<ffffffff81090606>] rcu_check_callbacks+0x1f6/0x5d4
[141625.607669]  [<ffffffff810940c8>] update_process_times+0x2a/0x4f
[141625.613925]  [<ffffffff8109fbee>] tick_sched_handle+0x32/0x3e
[141625.619923]  [<ffffffff8109fc2f>] tick_sched_timer+0x35/0x5c
[141625.625830]  [<ffffffff81094a1f>] __hrtimer_run_queues+0x8f/0x18d
[141625.632171]  [<ffffffff81094c9e>] hrtimer_interrupt+0xa0/0x166
[141625.638258]  [<ffffffff8102bf2a>] local_apic_timer_interrupt+0x4e/0x52
[141625.645036]  [<ffffffff8102c36f>] smp_apic_timer_interrupt+0x39/0x4a
[141625.651643]  [<ffffffff8140b9e8>] apic_timer_interrupt+0x68/0x70
[141625.657895]  <EOI>  [<ffffffff81346ee8>] ? dst_destroy+0x7c/0xb5
[141625.664188]  [<ffffffff813d45b5>] ? fib6_flush_trees+0x20/0x20
[141625.670272]  [<ffffffff81082b45>] ? queue_write_lock_slowpath+0x60/0x6f
[141625.677140]  [<ffffffff8140aa33>] _raw_write_lock_bh+0x23/0x25
[141625.683218]  [<ffffffff813d4553>] __fib6_clean_all+0x40/0x82
[141625.689124]  [<ffffffff813d45b5>] ? fib6_flush_trees+0x20/0x20
[141625.695207]  [<ffffffff813d6058>] fib6_clean_all+0xe/0x10
[141625.700854]  [<ffffffff813d60d3>] fib6_run_gc+0x79/0xc8
[141625.706329]  [<ffffffff813d0510>] ip6_dst_gc+0x85/0xf9
[141625.711718]  [<ffffffff81346d68>] dst_alloc+0x55/0x159
[141625.717105]  [<ffffffff813d09b5>] __ip6_dst_alloc.isra.32+0x19/0x63
[141625.723620]  [<ffffffff813d1830>] ip6_pol_route+0x36a/0x3e8
[141625.729441]  [<ffffffff813d18d6>] ip6_pol_route_output+0x11/0x13
[141625.735700]  [<ffffffff813f02c8>] fib6_rule_action+0xa7/0x1bf
[141625.741698]  [<ffffffff813d18c5>] ? ip6_pol_route_input+0x17/0x17
[141625.748043]  [<ffffffff81357c48>] fib_rules_lookup+0xb5/0x12a
[141625.754050]  [<ffffffff81141628>] ? poll_select_copy_remaining+0xf9/0xf9
[141625.761002]  [<ffffffff813f0535>] fib6_rule_lookup+0x37/0x5c
[141625.766914]  [<ffffffff813d18c5>] ? ip6_pol_route_input+0x17/0x17
[141625.773260]  [<ffffffff813d008c>] ip6_route_output+0x7a/0x82
[141625.779177]  [<ffffffff813c44c8>] ip6_dst_lookup_tail+0x53/0x112
[141625.785437]  [<ffffffff813c45c3>] ip6_dst_lookup_flow+0x2a/0x6b
[141625.791604]  [<ffffffff813ddaab>] rawv6_sendmsg+0x407/0x9b6
[141625.797423]  [<ffffffff813d7914>] ? do_ipv6_setsockopt.isra.8+0xd87/0xde2
[141625.804464]  [<ffffffff8139d4b4>] inet_sendmsg+0x57/0x8e
[141625.810028]  [<ffffffff81329ba3>] sock_sendmsg+0x2e/0x3c
[141625.815588]  [<ffffffff8132be57>] SyS_sendto+0xfe/0x143
[141625.821063]  [<ffffffff813dd551>] ? rawv6_setsockopt+0x5e/0x67
[141625.827146]  [<ffffffff8132c9f8>] ? sock_common_setsockopt+0xf/0x11
[141625.833660]  [<ffffffff8132c08c>] ? SyS_setsockopt+0x81/0xa2
[141625.839565]  [<ffffffff8140ac17>] entry_SYSCALL_64_fastpath+0x12/0x6a

Fixes: d52d3997f843 ("pv6: Create percpu rt6_info")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Add rt6_make_pcpu_route()

It is a prep work for fixing a potential deadlock when creating
a pcpu rt.

The current rt6_get_pcpu_route() will also create a pcpu rt if one does not
exist. This patch moves the pcpu rt creation logic into another function,
rt6_make_pcpu_route().

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Remove un-used argument from ip6_dst_alloc()

After 4b32b5ad31a6 ("ipv6: Stop rt6_info from using inet_peer's metrics"),
ip6_dst_alloc() does not need the 'table' argument. This patch
cleans it up.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>