GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
8 years agoMerge tag 'renesas-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git...
Arnd Bergmann [Mon, 25 Apr 2016 21:01:39 +0000 (23:01 +0200)]
Merge tag 'renesas-dt-for-v4.7' of git://git./linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v4.7" from Simon Horman:

* Configure NMI key as wakeup source in DT of kzm9g board
* Add SDHI support to DT of gose board
* Add support of UHS-I SDR-50 for SDHI to DT of r8a7790 SoC
* Correct interrupt type for ARM TWD in DT of r8a7779 and sh73a0 SoCs
* Add IIC support to DT of r8a7794 SoC
* Add CAN support to DT of r8a7793 and r8a7794 SoCs
* Add SCIF2 support to r8a7790 device tree
* Use CAN, JPU and USB3.0 fallback compatibility string
  in DT of r8a7791 and r8a7790 SoCs

* tag 'renesas-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  ARM: dts: gose: Enable SDHI controllers
  ARM: dts: r8a7793: Add SDHI controllers
  ARM: dts: r8a7790: fix max-frequency for SDHI
  ARM: dts: kzm9g: Configure NMI key as wake-up source
  ARM: dts: r8a7790: lager: Enable UHS-I SDR-50
  ARM: dts: r8a7790: Set maximum frequencies for SDHI clocks
  ARM: dts: r8a7791: Use USB3.0 fallback compatibility string
  ARM: dts: r8a7790: Use USB3.0 fallback compatibility string
  ARM: dts: r8a7779: Correct interrupt type for ARM TWD
  ARM: dts: sh73a0: Correct interrupt type for ARM TWD
  ARM: dts: r8a7794: Add IIC nodes
  ARM: dts: r8a7794: add IIC clocks
  ARM: dts: r8a7793: add CAN nodes to device tree
  ARM: dts: r8a7793: add CAN clocks to device tree
  ARM: dts: r8a7794: add CAN nodes to device tree
  ARM: dts: r8a7794: add CAN clocks to device tree
  ARM: dts: r8a7790: use fallback can compatibility string
  ARM: dts: r8a7791: use fallback can compatibility string
  ARM: dts: r8a7790: Add SCIF2 device node
  ARM: dts: r8a7790: Add SCIF2 clock
  ...

8 years agoARM: dts: gose: Enable SDHI controllers
Ulrich Hecht [Mon, 18 Apr 2016 16:02:57 +0000 (18:02 +0200)]
ARM: dts: gose: Enable SDHI controllers

Includes regulator and pin assignments.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: r8a7793: Add SDHI controllers
Ulrich Hecht [Mon, 18 Apr 2016 16:02:56 +0000 (18:02 +0200)]
ARM: dts: r8a7793: Add SDHI controllers

Same as on r8a7791.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: r8a7790: fix max-frequency for SDHI
Wolfram Sang [Mon, 18 Apr 2016 09:41:30 +0000 (11:41 +0200)]
ARM: dts: r8a7790: fix max-frequency for SDHI

The wrong values come from an old datasheet (H2 v0.6). Anything later
has the fixed value of 195MHz (H2 v0.7 up to Gen2-common V2.0).

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: kzm9g: Configure NMI key as wake-up source
Geert Uytterhoeven [Thu, 14 Apr 2016 09:58:42 +0000 (11:58 +0200)]
ARM: dts: kzm9g: Configure NMI key as wake-up source

Add a GPIO key with wake-up capability for the NMI button.
This allows to wake up the system from s2ram without relying on the
buttons on the optional switch board.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: r8a7790: lager: Enable UHS-I SDR-50
Wolfram Sang [Fri, 1 Apr 2016 15:44:39 +0000 (17:44 +0200)]
ARM: dts: r8a7790: lager: Enable UHS-I SDR-50

Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,2}.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: artpec: update clock bindings in artpec6.dtsi
Lars Persson [Mon, 14 Mar 2016 09:01:43 +0000 (10:01 +0100)]
ARM: dts: artpec: update clock bindings in artpec6.dtsi

The clock binding for the main clock controller was changed to an
indexed controller style binding on request of the clk
maintainers. This updates the dtsi to use the new bindings.

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
8 years agoMerge tag 'qcom-dt-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/agross...
Arnd Bergmann [Sun, 24 Apr 2016 21:58:18 +0000 (23:58 +0200)]
Merge tag 'qcom-dt-for-4.7' of git://git./linux/kernel/git/agross/linux into next/dt

Merge "Qualcomm Device Tree Changes for v4.7" from Andy Gross:

* Add DB600C support
* Add IPQ4019 support
* Add additional nodes for APQ8064
* Fix APQ8064 pinctrls for i2c/spi
* Add MSM8974 nodes for smp2p and smd
* Modify MSM8974 memory reserve for rfsa and rmtfs
* Add support for BQ27541 on Nexus7

* tag 'qcom-dt-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (30 commits)
  device-tree: nexus7: Add bq27541 battery interface to dts
  ARM: dts: db600c: add support to magnetometer
  ARM: dts: db600c: add spi support
  ARM: dts: db600c: add i2c support
  ARM: dts: db600c: Add on board leds support
  ARM: dts: db600c: add on board sata support.
  ARM: dts: db600c: add pcie support
  ARM: dts: db600c: add usb support
  ARM: dts: db600c: Add eMMC and SD card support
  ARM: dts: db600c: add pmic regulator supplies
  ARM: dts: db600c: add board support with serial
  ARM: dts: apq8064: add gsbi7 i2c support
  ARM: dts: apq8064: add support to gsbi1 uart
  ARM: dts: apq8064: fix the pinctrls for i2c and spi
  ARM: dts: qcom: apq8064: Add smd node and all edges
  ARM: dts: qcom: apq8064: Add complete smsm node
  ARM: dts: qcom: apq8064: Add syscon for sic-non-secure
  ARM: dts: msm8974: Add modem smp2p and smd nodes
  ARM: dts: msm8974: Add node for second i2c from blsp1
  ARM: dts: msm8974: Split efs in rfsa and rmtfs
  ...

8 years agoMerge tag 'arm-soc/for-4.7/devicetree' of http://github.com/Broadcom/stblinux into...
Arnd Bergmann [Sun, 24 Apr 2016 21:56:38 +0000 (23:56 +0200)]
Merge tag 'arm-soc/for-4.7/devicetree' of github.com/Broadcom/stblinux into next/dt

Merge "Broadcom ARM-based SoC Device Tree changes" from Florian Fainelli:

- Rafal adds proper VCC GPIO to be fed to the USB host controllers for known
  BCM5301x devices needing that, he also enables earlycon, and enables the
  SPI-NOR flashes on relevant devices

- Eric adds the VideoCore 4 Device Tree nodes to the BCM283x Device Tree and
  provides a DRM patch to kick out the simplefb framebuffer to avoid conflicts

- Stephan adds proper CPU nodes for the ARM processor on the BCM2835 SoC Device
  Tree

- Martin provides a binding fix for the DMA channel interrupt numbers and
  description

* tag 'arm-soc/for-4.7/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: BCM5301X: Add DT entry for SPI controller and NOR flash
  dt/bindings: bcm2835: correct description for DMA-int
  ARM: bcm2835: add CPU node for ARM core
  ARM: bcm2835: Add VC4 to the device tree.
  drm/vc4: Kick out the simplefb framebuffer before we set up KMS.
  ARM: BCM5301X: Enable earlycon on tested devices
  ARM: BCM5301X: Set vcc-gpio for USB controllers of few devices

8 years agoMerge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Arnd Bergmann [Sun, 24 Apr 2016 21:43:56 +0000 (23:43 +0200)]
Merge tag 'omap-for-v4.7/dt-part1' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt

Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren:

- Two sets of name and unit address check fixes for dts files.

- DMA, McASP, and timer and regulator related dts changes for dra7

- Add more devices for Nokia N9/N950

- Initial support for am335x ICEv2

- Initial support for am572x-IDK

- Pinctrl changes for am335x-baltos-ir5221

- Initial support for Amazon Kindle Fire (first generation)

- A series of changes to add GPIO controller support for the
  GPMC driver. The driver changes will be merged separately.

- Support for am43xx clkout1

- Pinctrl and RTC changes for am335x-chili

- Add support for dra72-evm rev C (SR2.0)

* tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits)
  ARM: dts: Add support for dra72-evm rev C (SR2.0)
  ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal
  ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board
  ARM: dts: am335x-chili*: Move uart0 description from SOM to board
  ARM: dts: am43xx: add support for clkout1 clock
  ARM: dts: omap3-beagle: Provide NAND ready pin
  ARM: dts: am335x: Provide NAND ready pin
  ARM: dts: am437x: Provide NAND ready pin
  ARM: dts: dra7x-evm: Provide NAND ready pin
  ARM: dts: dm816x: Enable gpio controller for GPMC
  ARM: dts: dm814x: Enable gpio controller for GPMC
  ARM: dts: omap3: Enable gpio controller for GPMC
  ARM: dts: am4372: Enable gpio controller for GPMC
  ARM: dts: am335x: Enable gpio controller for GPMC
  ARM: dts: dra7: Enable gpio controller for GPMC
  ARM: dts: omap5: Enable gpio and interrupt controller for GPMC
  ARM: dts: omap4: Enable gpio and interrupt controller for GPMC
  ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC
  ARM: dts: omap4-kc1: Power off support
  ARM: dts: omap4-kc1: LEDs support
  ...

8 years agoMerge tag 'renesas-rcar-sysc-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Sun, 24 Apr 2016 21:39:29 +0000 (23:39 +0200)]
Merge tag 'renesas-rcar-sysc-for-v4.7' of git://git./linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC R-Car SYSC Updates for v4.7" from Simon Horman:

* Add DT bindings for the R-Car System Controller.
  An implementation is intended to follow.

* tag 'renesas-rcar-sysc-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions
  PM / Domains: Add DT bindings for the R-Car System Controller

8 years agoARM: dts: uniphier: add NAND pinmux node
Masahiro Yamada [Thu, 21 Apr 2016 02:11:23 +0000 (11:11 +0900)]
ARM: dts: uniphier: add NAND pinmux node

This commit adds pin-mux nodes for the NAND controller.
Some SoCs support 2 chip selects and the others only support
1 chip select.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
8 years agoMerge tag 'imx-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo...
Arnd Bergmann [Sun, 24 Apr 2016 21:36:10 +0000 (23:36 +0200)]
Merge tag 'imx-dt-4.7' of git://git./linux/kernel/git/shawnguo/linux into next/dt

Merge "The i.MX device tree updates for 4.7" from Shawn Guo:

 - More i.MX6 System-on-Module board support from Ka-Ro electronics:
   tx6s-8xxx, tx6u-8xxx, tx6q-1xxx, tx6ul-00xx.
 - Nitrogen6_MAX QP and Nitrogen6_SoloX board support from Boundary
   Devices.
 - VF610 based ZII development board support.
 - Add SAI interface audio support for i.MX6SX SDB board.
 - A number of random updates on LS1021A and VF610 dts files.
 - A couple of pinumx updates on i.MX25 and i.MX28.

* tag 'imx-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (36 commits)
  ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
  ARM: dts: i.MX3x: add keypad port devicetree nodes
  ARM: dts: ls1021a: add pix clock to DCU dts node
  ARM: dts: ls1021a: DSPI has 6 chip-selects
  ARM: dts: ls1021a: Add gpio support for ls1021a platform
  ARM: dts: imx6q-ba16: Remove unused vqmmc-supply
  ARM: dts: ls1021a: add SCFG MSI dts node
  ARM: dts: imx28: add alternative pinmuxing for mac0
  ARM: dts: imx6q-tbs2910: fix fec reset polarity
  ARM: dts: vf610-zii-dev: Add ZII development board.
  ARM: dts: vfxxx: add missing reg properties
  ARM: dts: vf-colibri: increase NAND clock speed
  ARM: dts: vf-colibri: alias the primary FEC as ethernet0
  ARM: dts: imx6sx-sdb: Add SAI support
  bindings: fsl-imx-sdma: Document 'fsl,sdma-event-remap' property
  ARM: dts: imx6sx: Remove unused property
  ARM: dts: imx6sx: Fix SAI DMA index
  ARM: dts: imx6q-ba16: Disable pwm2 by default
  ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
  ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string
  ...

8 years agoMerge tag 'tegra-for-4.7-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra...
Arnd Bergmann [Sun, 24 Apr 2016 21:27:30 +0000 (23:27 +0200)]
Merge tag 'tegra-for-4.7-arm' of git://git./linux/kernel/git/tegra/linux into next/dt

Merge "ARM: tegra: Changes for v4.7-rc1" from Thierry Reding:

A couple of patches that cleanup some Kconfig, enable various features,
use stdout-path to define the debug serial port (so that it doesn't have
to be manually specified on the kernel command-line) and cleanup and fix
some minor device trees bugs.

* tag 'tegra-for-4.7-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Correct interrupt type for ARM TWD
  ARM: tegra: Add stdout-path for various boards
  ARM: tegra: Replace legacy *,wakeup property with wakeup-source
  ARM: tegra: Enable watchdog support for Tegra114 and Tegra124
  ARM: tegra: Add high speed UARTs to Jetson TK1 device tree
  ARM: tegra: Fix copy/paste typo in several DTS includes
  ARM: tegra: Remove redundant ARM_L1_CACHE_SHIFT_6 select

8 years agoMerge tag 'davinci-for-v4.7/dt' of git://git.kernel.org/pub/scm/linux/kernel/git...
Arnd Bergmann [Sun, 24 Apr 2016 21:25:44 +0000 (23:25 +0200)]
Merge tag 'davinci-for-v4.7/dt' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/dt

Merge "Device-Tree updates for DaVinci" from Sekhar Nori:

This contains some clean-up and fixes of device-tree data and addition
of i2c1 node for DA850.

* tag 'davinci-for-v4.7/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
  ARM: DTS: da850: add node for i2c1
  ARM: dts: davinci: use proper address after @
  ARM: DTS: da850: fix missing #gpio-cells in gpio node

8 years agoMerge tag 'nomadik-dts-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Arnd Bergmann [Sun, 24 Apr 2016 21:23:53 +0000 (23:23 +0200)]
Merge tag 'nomadik-dts-v4.7' of git://git./linux/kernel/git/linusw/linux-nomadik into next/dt

Merge "Nomadik DTS changes for v4.7" from Linus Walleij:
- Add accelerometer for NHK15
- Add DMA engine definitions and UART channels

* tag 'nomadik-dts-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: nomadik: add DMA engine and some channels
  ARM: dts: nomadik: add accelerometer IRQ and pin setting

8 years agoMerge tag 'mvebu-dt-4.7-1' of git://git.infradead.org/linux-mvebu into next/dt
Arnd Bergmann [Sun, 24 Apr 2016 21:21:34 +0000 (23:21 +0200)]
Merge tag 'mvebu-dt-4.7-1' of git://git.infradead.org/linux-mvebu into next/dt

Merge "mvebu dt for 4.7 (part 1)" from Gregory CLEMENT:

- add hardware monitor support in the NSA320 device tree
- update makefile with kirkwood-ds112.dtb and kirkwood-nsa320.dtb
- fix GPIO config on the Linksys boards
- various Kirkwood DT warning fixup from the newer DT compiler

* tag 'mvebu-dt-4.7-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500
  ARM: dts: orion5x: add device tree for kurobox-pro
  ARM: dts: kirkwood: Add address go regulator unit name
  ARM: dts: kirkwood: Add address to mbus unit name
  ARM: dts: kirkwood: Remove address from gpio-i2c unit name
  ARM: dts: kirkwood: Fixup pcie DT warnings
  ARM: dts: kirkwood: Add address to ethernet-phy unit name
  ARM: dts: kirkwood: Remove address from dsa unit name
  ARM: dts: kirkwood: Remove node address from leds
  ARM: dts: kirkwood: Remove button address and fixup names
  ARM: dts: kirkwood: add kirkwood-nsa320.dtb to Makefile
  ARM: dts: kirkwood: add kirkwood-ds112.dtb to Makefile
  ARM: mvebu: fix GPIO config on the Linksys boards
  ARM: dts: kirkwood: Add the hardware monitor to the NSA320 device tree

8 years agoMerge tag 'samsung-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk...
Arnd Bergmann [Sun, 24 Apr 2016 21:16:48 +0000 (23:16 +0200)]
Merge tag 'samsung-dt-4.7' of git://git./linux/kernel/git/krzk/linux into next/dt

Merge "Samsung Device Tree updates and improvements for v4.7" from Krzysztof Kozlowski:

1. Enable accelerated AES (Security SubSystem) on Exynos4412-based boards.
2. Enable HDMI CEC on Exynos4412-based Odroid.
3. Add regulator supplies for eMMC/SD on Odroid XU3/XU4.
4. Fix DTC unit name warnings.
5. Merge topic branch of new Artik5 board.

* tag 'samsung-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: s5p: Fix DTC unit name warnings in SMDKv210 board
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos5440
  ARM: dts: exynos: Fix DTC unit name warnings in SMDK5420
  ARM: dts: exynos: Fix DTC unit name warnings in Peach Pit
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos542x
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos4x12
  ARM: dts: exynos: Fix DTC unit name warnings in Trats2 board
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos4
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos3250
  ARM: dts: exynos: Fix DTC unit name warnings in cros-adc-thermistors
  ARM: dts: exynos: Add eMMC and SD regulator supplies to Odroid XU3/XU4
  ARM: dts: exynos: Enable the HDMI CEC device on Exynos4412 Odroid boards
  ARM: dts: exynos: Add node for the HDMI CEC device to exynos4
  ARM: dts: exynos: Add HDMI CEC pin definition to exynos4 pinctrl
  ARM: dts: exynos: Enable SSS on Odroid X/X2/U3 family
  ARM: dts: exynos: Enable SSS on Trats2
  ARM: dts: exynos: Add Security SubSystem node to Exynos4

8 years agoMerge tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux...
Arnd Bergmann [Sun, 24 Apr 2016 21:12:59 +0000 (23:12 +0200)]
Merge tag 'samsung-dt-exynos3250-artik5-4.7' of git://git./linux/kernel/git/krzk/linux into next/dt

Merge "Topic branch for Device Tree changes for Exynos 3250 for v4.7" from Krzysztof Kozlowski:

Merge necessary new clocks from Sylwester (used by new board) and add support
for Exynos3250-based Artik5 board.

* tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add MSHC2 DT node for SD card for exynos3250-artik5-eval board
  ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module
  ARM: dts: exynos: Add MSHC2 DT node for Exynos3250 SoC
  ARM: dts: exynos: Add UART2 DT node for Exynos3250 SoC
  ARM: dts: exynos: Add initial gpio setting of MMC2 device for exynos3250-monk
  ARM: dts: exynos: Add initial pin configuration for exynos3250-rinato
  clk: samsung: exynos3250: Add MMC2 clock
  clk: samsung: exynos3250: Add UART2 clock
  dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250

8 years agoMerge tag 'bcm2835-dt-next-2016-04-20' into devicetree/next
Florian Fainelli [Fri, 22 Apr 2016 19:22:04 +0000 (12:22 -0700)]
Merge tag 'bcm2835-dt-next-2016-04-20' into devicetree/next

This pull request brings in VC4 devicetree support and the other minor
DT changes for 4.7.

Also included is a DRM patch necessary to prevent regressions when
simplefb and vc4 drivers are both present.  The patch was suggested by
the simplefb maintainer as the solution agreed upon at ELCE 2014, and
was acked by the DRM maintainer for merging through this tree.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
8 years agoARM: BCM5301X: Add DT entry for SPI controller and NOR flash
Rafał Miłecki [Tue, 19 Apr 2016 06:56:46 +0000 (08:56 +0200)]
ARM: BCM5301X: Add DT entry for SPI controller and NOR flash

Controller is present on every BCM4708* board but only few devices have
serial flash attached so mark it as disabled by default.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
8 years agoARM: dts: r8a7790: Set maximum frequencies for SDHI clocks
Ben Hutchings [Fri, 1 Apr 2016 15:44:38 +0000 (17:44 +0200)]
ARM: dts: r8a7790: Set maximum frequencies for SDHI clocks

Taken from the datasheet.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agodevice-tree: nexus7: Add bq27541 battery interface to dts
John Stultz [Thu, 14 Apr 2016 21:07:11 +0000 (14:07 -0700)]
device-tree: nexus7: Add bq27541 battery interface to dts

Add support for battery level reading on the Nexus7 by
enabling the bq27541 driver in the nexus7 dts

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add support to magnetometer
Srinivas Kandagatla [Tue, 12 Apr 2016 09:34:02 +0000 (10:34 +0100)]
ARM: dts: db600c: add support to magnetometer

This patch adds support to on board LIS3MDLTR magnetometer.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add spi support
Srinivas Kandagatla [Tue, 12 Apr 2016 09:34:01 +0000 (10:34 +0100)]
ARM: dts: db600c: add spi support

This patch adds spi nodes required to provide spi bus support on LS
expansion.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add i2c support
Srinivas Kandagatla [Tue, 12 Apr 2016 09:34:00 +0000 (10:34 +0100)]
ARM: dts: db600c: add i2c support

This patch adds nodes required to enable 4 i2c buses on the board which
are connected to various sensors and eeprom.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: Add on board leds support
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:59 +0000 (10:33 +0100)]
ARM: dts: db600c: Add on board leds support

This patch adds support to 4 user leds, wlan and bt led on board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add on board sata support.
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:58 +0000 (10:33 +0100)]
ARM: dts: db600c: add on board sata support.

This patch enables sata and regulators required to get on board sata
working.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add pcie support
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:57 +0000 (10:33 +0100)]
ARM: dts: db600c: add pcie support

This patch adds pcie and regulators required to get on board ATL1C
ethernet working.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add usb support
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:56 +0000 (10:33 +0100)]
ARM: dts: db600c: add usb support

This patch adds usb host and otg support on board with required
regulators.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: Add eMMC and SD card support
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:55 +0000 (10:33 +0100)]
ARM: dts: db600c: Add eMMC and SD card support

This patch adds eMMC and SD card support with card detect and adding
required regulators.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add pmic regulator supplies
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:54 +0000 (10:33 +0100)]
ARM: dts: db600c: add pmic regulator supplies

This patch adds pmic regulator supplies connected on the board.
Rest of the invidual regulators would be added as and when required by
the devices.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: db600c: add board support with serial
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:53 +0000 (10:33 +0100)]
ARM: dts: db600c: add board support with serial

This patch adds support to DB600c with basic serial ports.
DB600c is based on APQ8064.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: apq8064: add gsbi7 i2c support
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:52 +0000 (10:33 +0100)]
ARM: dts: apq8064: add gsbi7 i2c support

This patch adds support to gsbi7 i2c which is used in some of the new
boards.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: apq8064: add support to gsbi1 uart
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:51 +0000 (10:33 +0100)]
ARM: dts: apq8064: add support to gsbi1 uart

This patch adds support to gsbi1 uart and its pinctrls nodes.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: apq8064: fix the pinctrls for i2c and spi
Srinivas Kandagatla [Tue, 12 Apr 2016 09:33:50 +0000 (10:33 +0100)]
ARM: dts: apq8064: fix the pinctrls for i2c and spi

This patch fixes pinctrls for spi and i2c nodes whose default and sleep
states are together, which is incorrect.

Without this patch i2c/spi would not be functional.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: qcom: apq8064: Add smd node and all edges
Bjorn Andersson [Tue, 29 Mar 2016 03:37:04 +0000 (20:37 -0700)]
ARM: dts: qcom: apq8064: Add smd node and all edges

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: qcom: apq8064: Add complete smsm node
Bjorn Andersson [Tue, 29 Mar 2016 03:37:03 +0000 (20:37 -0700)]
ARM: dts: qcom: apq8064: Add complete smsm node

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: qcom: apq8064: Add syscon for sic-non-secure
Bjorn Andersson [Tue, 29 Mar 2016 03:37:02 +0000 (20:37 -0700)]
ARM: dts: qcom: apq8064: Add syscon for sic-non-secure

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: msm8974: Add modem smp2p and smd nodes
Bjorn Andersson [Tue, 29 Mar 2016 01:32:39 +0000 (18:32 -0700)]
ARM: dts: msm8974: Add modem smp2p and smd nodes

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: msm8974: Add node for second i2c from blsp1
Bjorn Andersson [Tue, 29 Mar 2016 01:32:38 +0000 (18:32 -0700)]
ARM: dts: msm8974: Add node for second i2c from blsp1

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoARM: dts: msm8974: Split efs in rfsa and rmtfs
Bjorn Andersson [Tue, 29 Mar 2016 01:32:37 +0000 (18:32 -0700)]
ARM: dts: msm8974: Split efs in rfsa and rmtfs

One part of the efs memory region is used specifically for sharing file system
buffers between the apps and modem cpus (aka rmtfs), so better reflect this
split.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add DMA nodes to ipq4019 SoC and DK01 device tree
Matthew McClintock [Wed, 23 Mar 2016 22:05:12 +0000 (17:05 -0500)]
qcom: ipq4019: add DMA nodes to ipq4019 SoC and DK01 device tree

This adds the blsp_dma node to the device tree and the required
properties for using DMA with serial

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add crypto nodes to ipq4019 SoC and DK01 device tree
Matthew McClintock [Wed, 23 Mar 2016 22:05:11 +0000 (17:05 -0500)]
qcom: ipq4019: add crypto nodes to ipq4019 SoC and DK01 device tree

This adds the crypto nodes to the ipq4019 device tree, it also adds the
BAM node used by crypto as well which the driver currently requires to
operate properly

The crypto driver itself depends on some other patches to qcom_bam_dma
to function properly:

https://lkml.org/lkml/2015/12/1/113

CC: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add cpu operating points for cpufreq support
Matthew McClintock [Wed, 23 Mar 2016 22:05:10 +0000 (17:05 -0500)]
qcom: ipq4019: add cpu operating points for cpufreq support

This adds some operating points for cpu frequeny scaling

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add i2c node to ipq4019 SoC and DK01 device tree
Matthew McClintock [Wed, 23 Mar 2016 22:05:08 +0000 (17:05 -0500)]
qcom: ipq4019: add i2c node to ipq4019 SoC and DK01 device tree

This will allow boards to enable the I2C bus

CC: Sricharan R <srichara@qti.qualcomm.com>
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add spi node to ipq4019 SoC and DK01 device tree
Matthew McClintock [Wed, 23 Mar 2016 22:05:07 +0000 (17:05 -0500)]
qcom: ipq4019: add spi node to ipq4019 SoC and DK01 device tree

This will allow boards to enable the SPI bus

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add support for reset via qcom,ps-hold
Matthew McClintock [Wed, 23 Mar 2016 22:05:06 +0000 (17:05 -0500)]
qcom: ipq4019: add support for reset via qcom,ps-hold

This will allow these types of boards to be rebooted.

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add watchdog node to ipq4019 SoC and DK01 device tree
Matthew McClintock [Wed, 23 Mar 2016 22:05:05 +0000 (17:05 -0500)]
qcom: ipq4019: add watchdog node to ipq4019 SoC and DK01 device tree

This will allow boards to enable watchdog support

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: add acc and saw nodes to bring up secondary cores
Matthew McClintock [Fri, 20 Nov 2015 00:29:48 +0000 (18:29 -0600)]
qcom: ipq4019: add acc and saw nodes to bring up secondary cores

This adds the required device tree nodes to bring up the
secondary cores on the ipq4019 SoC.

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agodts: ipq4019: Add support for IPQ4019 DK01 board
Matthew McClintock [Thu, 19 Nov 2015 23:19:32 +0000 (17:19 -0600)]
dts: ipq4019: Add support for IPQ4019 DK01 board

Initial board support dts files for DK01 board.

Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agoqcom: ipq4019: Add basic board/dts support for IPQ4019 SoC
Matthew McClintock [Thu, 19 Nov 2015 23:19:31 +0000 (17:19 -0600)]
qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC

Add initial dts files and SoC support for IPQ4019

Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
8 years agodt/bindings: bcm2835: correct description for DMA-int
Martin Sperl [Sat, 5 Mar 2016 18:02:49 +0000 (18:02 +0000)]
dt/bindings: bcm2835: correct description for DMA-int

Interrupt DMA11 is the shared interrupt for DMA channels 11 to 14
Interrupt DMA12 is the shared interrupt triggering for any DMA channel
(this also includes DMA channel 15)

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
8 years agoARM: bcm2835: add CPU node for ARM core
Stefan Wahren [Thu, 31 Mar 2016 17:25:17 +0000 (17:25 +0000)]
ARM: bcm2835: add CPU node for ARM core

This patch adds the CPU node of the BCM2835 into the DT.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
8 years agoARM: bcm2835: Add VC4 to the device tree.
Eric Anholt [Mon, 2 Mar 2015 22:36:16 +0000 (14:36 -0800)]
ARM: bcm2835: Add VC4 to the device tree.

VC4 is the GPU (display and 3D) present on the 283x.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
8 years agodrm/vc4: Kick out the simplefb framebuffer before we set up KMS.
Eric Anholt [Tue, 19 Apr 2016 20:24:14 +0000 (13:24 -0700)]
drm/vc4: Kick out the simplefb framebuffer before we set up KMS.

If we don't, then simplefb stays loaded on /dev/fb0 even though
scanout isn't happening from simplefb's memory area any more, and you
end up with no console.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Dave Airlie <airlied@redhat.com>
8 years agoARM: dts: r8a7791: Use USB3.0 fallback compatibility string
Simon Horman [Thu, 24 Mar 2016 02:01:08 +0000 (11:01 +0900)]
ARM: dts: r8a7791: Use USB3.0 fallback compatibility string

Use recently added fallback compatibility string in r8a7791 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7790: Use USB3.0 fallback compatibility string
Simon Horman [Thu, 24 Mar 2016 02:01:07 +0000 (11:01 +0900)]
ARM: dts: r8a7790: Use USB3.0 fallback compatibility string

Use recently added fallback compatibility string in r8a7790 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7779: Correct interrupt type for ARM TWD
Geert Uytterhoeven [Fri, 18 Mar 2016 10:19:21 +0000 (11:19 +0100)]
ARM: dts: r8a7779: Correct interrupt type for ARM TWD

The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.

For R-Car H1 devices the PPI type cannot be set, and so when we attempt
to set the type for the ARM TWD interrupt it fails.  This has gone
unnoticed because it fails silently, and because we cannot re-configure
the type it has had no impact. Nevertheless fix the type for the TWD
interrupt so that it matches the hardware configuration.

Based on patches by Jon Hunter for Tegra20/30 and OMAP4.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: sh73a0: Correct interrupt type for ARM TWD
Geert Uytterhoeven [Fri, 18 Mar 2016 10:19:20 +0000 (11:19 +0100)]
ARM: dts: sh73a0: Correct interrupt type for ARM TWD

The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.

For SH-Mobile AG5 devices the PPI type cannot be set, and so when we
attempt to set the type for the ARM TWD interrupt it fails.  This has
gone unnoticed because it fails silently, and because we cannot
re-configure the type it has had no impact. Nevertheless fix the type
for the TWD interrupt so that it matches the hardware configuration.

Based on patches by Jon Hunter for Tegra20/30 and OMAP4.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: r8a7794: Add IIC nodes
Simon Horman [Thu, 17 Mar 2016 07:35:17 +0000 (16:35 +0900)]
ARM: dts: r8a7794: Add IIC nodes

Add IIC nodes to r8a7794 device tree.

Based on similar work for the r8a7793 by Laurent Pinchart.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7794: add IIC clocks
Simon Horman [Thu, 17 Mar 2016 07:33:10 +0000 (16:33 +0900)]
ARM: dts: r8a7794: add IIC clocks

Add IIC clocks to r8a7794 device tree.

Based on similar work for the r8a7790 by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7793: add CAN nodes to device tree
Simon Horman [Wed, 16 Mar 2016 01:52:56 +0000 (10:52 +0900)]
ARM: dts: r8a7793: add CAN nodes to device tree

Add CAN nodes to r8a7793 device tree.

Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: r8a7793: add CAN clocks to device tree
Simon Horman [Wed, 16 Mar 2016 01:52:55 +0000 (10:52 +0900)]
ARM: dts: r8a7793: add CAN clocks to device tree

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock
(clkp2) and external clock fed on CAN_CLK pin. Describe those clocks in
the device tree along with  the USB_EXTAL clock from which clkp2 is
derived.

Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7794: add CAN nodes to device tree
Simon Horman [Tue, 15 Mar 2016 00:26:34 +0000 (09:26 +0900)]
ARM: dts: r8a7794: add CAN nodes to device tree

Add CAN nodes to r8a7794 device tree.

Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
8 years agoARM: dts: r8a7794: add CAN clocks to device tree
Simon Horman [Tue, 15 Mar 2016 00:26:33 +0000 (09:26 +0900)]
ARM: dts: r8a7794: add CAN clocks to device tree

Add CAN nodes to r8a7794 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
8 years agoARM: dts: r8a7790: use fallback can compatibility string
Simon Horman [Mon, 14 Mar 2016 02:13:59 +0000 (11:13 +0900)]
ARM: dts: r8a7790: use fallback can compatibility string

Use recently added fallback compatibility string in r8a7790 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7791: use fallback can compatibility string
Simon Horman [Mon, 14 Mar 2016 02:13:58 +0000 (11:13 +0900)]
ARM: dts: r8a7791: use fallback can compatibility string

Use recently added fallback compatibility string in r8a7791 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7790: Add SCIF2 device node
Geert Uytterhoeven [Thu, 3 Mar 2016 09:32:41 +0000 (10:32 +0100)]
ARM: dts: r8a7790: Add SCIF2 device node

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: r8a7790: Add SCIF2 clock
Geert Uytterhoeven [Thu, 3 Mar 2016 09:32:40 +0000 (10:32 +0100)]
ARM: dts: r8a7790: Add SCIF2 clock

Based on Rev. 2.00 of the R-Car Gen2 datasheet.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: r8a7791: use fallback jpu compatibility string
Simon Horman [Wed, 24 Feb 2016 02:29:06 +0000 (11:29 +0900)]
ARM: dts: r8a7791: use fallback jpu compatibility string

Use recently added fallback compatibility string in r8a7791 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: r8a7790: use fallback jpu compatibility string
Simon Horman [Wed, 24 Feb 2016 02:29:05 +0000 (11:29 +0900)]
ARM: dts: r8a7790: use fallback jpu compatibility string

Use recently added fallback compatibility string in r8a7790 device trees.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
8 years agoARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
Maciej S. Szmigiero [Fri, 15 Apr 2016 22:27:23 +0000 (00:27 +0200)]
ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support

The official UDOO board kit has 7 and 15.6 inch touchscreen LCD panels
as options.

This patch adds support for 7 inch panel only, but the 15.6 inch one
should be easy to add using the same regulator, backlight device and
LVDS channel.

Since this panel is an option for UDOO board it is disabled by default
and can be enabled (for example) by the following U-Boot commands:
fdt set backlight status okay
fdt set panelchan status okay
fdt set panel7 status okay
fdt set touchscreenp7 status okay

The LVDS channels is also disabled by default to avoid warning from its
driver.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
8 years agoARM: dts: i.MX3x: add keypad port devicetree nodes
Alexander Kurz [Fri, 15 Apr 2016 07:54:20 +0000 (09:54 +0200)]
ARM: dts: i.MX3x: add keypad port devicetree nodes

Add the Keypad Port (KPP) devicetree nodes for IMX31 and IMX35 SOC.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
8 years agosoc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions
Geert Uytterhoeven [Wed, 13 Apr 2016 14:44:23 +0000 (16:44 +0200)]
soc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agosoc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions
Geert Uytterhoeven [Wed, 13 Apr 2016 14:44:22 +0000 (16:44 +0200)]
soc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agosoc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions
Geert Uytterhoeven [Wed, 13 Apr 2016 14:44:21 +0000 (16:44 +0200)]
soc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions

R-Car M2-N is identical to R-Car M2-W w.r.t. power domains, so reuse the
definitions from the latter.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agosoc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions
Geert Uytterhoeven [Wed, 13 Apr 2016 14:44:20 +0000 (16:44 +0200)]
soc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agosoc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions
Geert Uytterhoeven [Wed, 13 Apr 2016 14:44:19 +0000 (16:44 +0200)]
soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agosoc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions
Geert Uytterhoeven [Wed, 13 Apr 2016 14:44:18 +0000 (16:44 +0200)]
soc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoPM / Domains: Add DT bindings for the R-Car System Controller
Geert Uytterhoeven [Wed, 13 Apr 2016 14:44:17 +0000 (16:44 +0200)]
PM / Domains: Add DT bindings for the R-Car System Controller

The Renesas R-Car System Controller provides power management for the
CPU cores and various coprocessors, following the generic PM domain
bindings in Documentation/devicetree/bindings/power/power_domain.txt.

This supports R-Car Gen1 (H1), Gen2, and Gen3.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
8 years agoARM: dts: Add support for dra72-evm rev C (SR2.0)
Nishanth Menon [Thu, 14 Apr 2016 17:45:58 +0000 (12:45 -0500)]
ARM: dts: Add support for dra72-evm rev C (SR2.0)

DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of
this change, a few updates were factored in that were software
incompatible with previous board in few areas:
- We now use DP83867 ethernet phy instead of older DP838865 which fails
  in certain use cases.
- Two Ethernet ports now instead of the single one in rev B.
- polarities changed for certain pcf gpios
- Due to SoC phy current requirements, VDDA supplies are split between
 ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is
 still supplied by ldo5, HDMI is now supplied by LDO2 instead of using
 LDO3.

NOTE: It does not make much sense to spin off a new board compatible
flag since there is no real benefit for the same.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal
Marcin Niestroj [Wed, 13 Apr 2016 08:44:17 +0000 (10:44 +0200)]
ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal

ChiliSOM has TPS65217's PWR_EN pin connected to AM335x PMIC_POWER_EN
pin. Processor's PMIC_POWER_EN is controlled by it's internal RTC, hence
RTC subsystem is responsible for proper board poweroff sequence.

This change enables complete poweroff sequence for ChiliBoard, switching
PMIC's state from ACTIVE to SLEEP.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board
Marcin Niestroj [Wed, 13 Apr 2016 08:44:16 +0000 (10:44 +0200)]
ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board

ChiliSOM has 2 Ethernet subsystems with different types of possibly used
PHY interfaces (i.e. MII, RMII, GMII, RGMII). Current code configured
pinmux for RMII on 1st Ethernet subsystem and enabled Ethernet MAC with
1 slave for all boards which use ChiliSOM.

This change moves pinmux configuration of 1st Ethernet subsystem to
ChiliBoard description, as this is board-specific.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoARM: dts: am335x-chili*: Move uart0 description from SOM to board
Marcin Niestroj [Wed, 13 Apr 2016 08:44:15 +0000 (10:44 +0200)]
ARM: dts: am335x-chili*: Move uart0 description from SOM to board

uart0 configuration code has been in SOM. However, it is possible to
use all (or none) of 6 uart's of AM335x processor present on ChiliSOM.

This fix moves declaration of uart0 from ChiliSOM to ChiliBoard, because
use of uart is strictly board-specific.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoARM: dts: nomadik: add DMA engine and some channels
Linus Walleij [Tue, 6 Oct 2015 10:03:27 +0000 (12:03 +0200)]
ARM: dts: nomadik: add DMA engine and some channels

This adds the DMA engine to the Nomadik and assigns the UART
DMA channels. Both slave DMA for UARTs and the memcpy engine
works fine, tested on the Nomadik NHK15.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
8 years agoARM: dts: nomadik: add accelerometer IRQ and pin setting
Linus Walleij [Wed, 2 Sep 2015 20:30:51 +0000 (22:30 +0200)]
ARM: dts: nomadik: add accelerometer IRQ and pin setting

The LIS3LV02DL accelerometer on the Nomadik NHK15 can generate
IRQs by the DRDY line. Map this in the DTS file and set up the
pin as input to the SoC.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
8 years agoARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500
Bert Vermeulen [Mon, 4 Apr 2016 14:46:07 +0000 (16:46 +0200)]
ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500

This platform is based on a Marvell 88E6282 SoC and 88E6171 switch.

[gregory.clement@free-electrons.com: fix block comment style]
Signed-off-by: Bert Vermeulen <bert@biot.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: orion5x: add device tree for kurobox-pro
Roger Shimizu [Tue, 29 Mar 2016 16:11:45 +0000 (01:11 +0900)]
ARM: dts: orion5x: add device tree for kurobox-pro

Add dts file to support Buffalo/Revogear Kurobox-Pro, which is marvell
orion5x based 3.5" HDD NAS.

It's a quite old product and already discontinued. So there's no
official website for it. But it was an early product which used marvell
orion5x 88F5182 chipset, it's popular in the community.
Some unofficial site:
  - http://buffalo.nas-central.org/wiki/Category:KuroboxPro
  - http://nice.kaze.com/KUROPRO_ProductSpecifications.pdf

This device tree is based on the board file:
  arch/arm/mach-orion5x/kurobox_pro-setup.c
However, the probing order of NAND and JEDEC-Flash are different from
the original board file, this results in incompatible minor number
for a few /dev/mtdX and /dev/mtdblockX devices.
So I still want to keep the board file for the time being.

Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Add address go regulator unit name
Andrew Lunn [Sun, 3 Apr 2016 02:03:50 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Add address go regulator unit name

The regulator has a reg property so include it in the unit name.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Add address to mbus unit name
Andrew Lunn [Sun, 3 Apr 2016 02:03:49 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Add address to mbus unit name

The mbus node has a ranges property.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Remove address from gpio-i2c unit name
Andrew Lunn [Sun, 3 Apr 2016 02:03:48 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Remove address from gpio-i2c unit name

gpio-i2c does not have a reg property, just a list of gpios.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Fixup pcie DT warnings
Andrew Lunn [Sun, 3 Apr 2016 02:03:47 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Fixup pcie DT warnings

PCIe has a range property, so the unit name should contain an address.
Make use of the label to enable individual PCIe busses. Also, fixup
the synology dtsi file which added a label pcie2 rather than using the
existing pcie1 label.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Add address to ethernet-phy unit name
Andrew Lunn [Sun, 3 Apr 2016 02:03:46 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Add address to ethernet-phy unit name

PHYs have an address on the mdio bus. So the unit name should contain
an address. This is complicated in that some .dtsi files contain the
node, but the reg is set in the .dts file. In this case, use the
abstract address X.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Remove address from dsa unit name
Andrew Lunn [Sun, 3 Apr 2016 02:03:45 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Remove address from dsa unit name

The dsa node does not have a reg property, so remove the address from
the unit name.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Remove node address from leds
Andrew Lunn [Sun, 3 Apr 2016 02:03:44 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Remove node address from leds

leds don't have a reg property, so remove the address from the unit name.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: dts: kirkwood: Remove button address and fixup names
Andrew Lunn [Sun, 3 Apr 2016 02:03:43 +0000 (04:03 +0200)]
ARM: dts: kirkwood: Remove button address and fixup names

The DT compiler is now warning about unit names with addresses but not
reg property. Fix all the gpio-key buttons which causes warnings.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
8 years agoARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
Petr Kulhavy [Fri, 1 Apr 2016 15:42:05 +0000 (17:42 +0200)]
ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1

Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
to use i2c clock.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
8 years agoARM: DTS: da850: add node for i2c1
Petr Kulhavy [Fri, 1 Apr 2016 15:42:04 +0000 (17:42 +0200)]
ARM: DTS: da850: add node for i2c1

da850 has two I2C controllers, but the node for i2c1 was missing.
Add node for i2c1 controller and i2c1 pinmux pins.

Signed-off-by: Petr Kulhavy <petr@barix.com>
[nsekhar@ti.com: fix indentation]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
8 years agoARM: dts: davinci: use proper address after @
David Lechner [Fri, 1 Apr 2016 15:42:03 +0000 (17:42 +0200)]
ARM: dts: davinci: use proper address after @

TI has been using the physical address in DT after the @ in device nodes.
The device tree convention is to use the same address that is used for
the reg property. This updates all davinci DT files to use the proper
convention.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>