Dave Jones [Thu, 13 Feb 2014 19:45:52 +0000 (14:45 -0500)]
staging/bcm: move several request ioctl cases out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:47 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_GPIO_MODE_REQUEST case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:41 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_GPIO_MULTI_REQUEST case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:36 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_GPIO_STATUS_REQUEST case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:31 +0000 (14:45 -0500)]
staging/bcm: move BCM_LED_THREAD_STATE_CHANGE_REQ case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:26 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_GPIO_SET_REQUEST case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:21 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_EEPROM_REGISTER_WRITE case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:16 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_EEPROM_REGISTER_READ case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:11 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_REGISTER_WRITE_PRIVATE case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Thu, 13 Feb 2014 19:45:05 +0000 (14:45 -0500)]
staging/bcm: move IOCTL_BCM_REGISTER_READ_PRIVATE case out to its own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Wed, 12 Feb 2014 10:08:42 +0000 (15:38 +0530)]
staging: rtl8821ae: Remove duplicate include
phy.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Wed, 12 Feb 2014 10:08:41 +0000 (15:38 +0530)]
staging: lustre: Remove duplicate inclusion of crypto.h
crypto.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Wed, 12 Feb 2014 16:00:22 +0000 (21:30 +0530)]
staging: rtl8188eu: remove header file ethernet.h
"ethernet.h" is included in three files but only "rtw_recv.c" using two macros
defined in "ethernet.h", so move used macros in "rtw_recv.c" and
remove "include/ethernet.h" header file and inclusion of this header file.
v2:
First version of this patch failed to apply.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chase Southwood [Wed, 12 Feb 2014 08:28:35 +0000 (02:28 -0600)]
Staging: comedi: Correct a few printf format codes
My static checker found some slightly inaccurate format codes in printf
calls in comedi_fops.c and drivers/comedi_bond.c. It may be slightly
pedantic to change them, but using the correctly corresponding format
codes is probably a good idea. All but one were unsigned ints that were
formatted with %i, change these to %u, and one was an int formatted with
%u, we want to format this with %d.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Surendra Patil [Wed, 12 Feb 2014 07:57:23 +0000 (23:57 -0800)]
drivers:staging:silicom fixed checkpatch coding style error on macros
checkpatch displays below errors for bypasslib/bp_ioctl.h file
ERROR: Macros with complex values should be enclosed in parenthesis
Hence added parenthesis for macros with complex values.
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Surendra Patil [Wed, 12 Feb 2014 07:57:22 +0000 (23:57 -0800)]
drivers:staging:silicom Fixed extern warnings reported by checkpatch
1) Deleted bp_proc_create() declaration from bp_mod.h,
because it is declared as static in bpctl_mod.c and not used anywhere.
2) checkpatch warns about
WARNING: externs should be avoided in .c files
because we have function declarations in bptcl_mod.c,These
functions are not used anywhere else so made them static.
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Wed, 12 Feb 2014 05:32:44 +0000 (21:32 -0800)]
staging/lustre/llite: remove lustre_generic_file_{read,write}
It looks like lustre_generic_file_{read,write} are a holdover from
2.6.19 where generic_file_aio_read() replaced generic_file_readv()
and cross-kernel interoperability was required for some period of
time. Lustre has since removed support for those older kernels, but
it looks like the wrappers were not deleted at that time. This patch
will delete them.
Pass &iocb->ki_pos as the last argument for these functions instead
of crw_pos, since this is the convention for other callers. Verify
that this is the same as the current crw_pos argument. This code can
likely be cleaned up further in a later patch.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 11 Feb 2014 22:12:12 +0000 (14:12 -0800)]
Merge tag 'iio-for-3.15a' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new drivers and cleanups for IIO in the 3.15 cycle.
New drivers:
* si7005 relative humidity and temperature sensor
* Lite-on ltr501 ambient light and proximity sensor
Cleanups
* Clean up some dead comments in max1363
* Drop some obsolete variables in adjd_s311 and tcs3472 left over from
the introduction of iio_push_to_buffers_with_timestamp.
* Drop some unneeded linux/init.h includes
* Squish a sparse warning in mpl3115 by correctly specifying a be32 variable.
* A number of cleanups and fixes for sca3000
* Drop an unneed checks in mxs-lradc, ad7303 and adis16400.
* Drop a platform_set_drvdata in viperboard after the only use of it was
removed during a devm conversion.
* Add a missing device name for ak8975 to comply with the ABI.
* Put mpu6050 into the IMU menu as it slipped out into the main menu.
* Fix a typo and some comment formatting in mpu6050.
* Document at91 ADC clock properties.
Kirill Tkhai [Mon, 10 Feb 2014 18:40:11 +0000 (22:40 +0400)]
staging: sbe-2t3e3: Fix possible reuse of freed memory in timer function
Do not call kfree() till timer function is finished.
[This was found using grep. Compilation tested only]
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sun, 9 Feb 2014 21:15:59 +0000 (15:15 -0600)]
staging: r8188eu: Remove _func_enter and _func_exit macros
These debugging macros are seldom used for debugging once the driver
is working. If routine tracing is needed, it can be added on an
individual basis.
In a few cases, removal of the exit macro left a bare label. In these
cases, a go to that label was replaced by a return.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sun, 9 Feb 2014 21:15:58 +0000 (15:15 -0600)]
staging: r8188eu: Eliminate macro to get next list item
The driver contains a macro that gets the next item in a linked list.
Replace it with a simple copy of the pointer.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sun, 9 Feb 2014 21:15:57 +0000 (15:15 -0600)]
staging: r8188eu: Replace misspelled local container macro
This driver has its own implementation of a "container_of" macro. It
is replaced with the standard container_of version. Most of these
are a straight one-to-one replacement; however, a few of the instances
referred to the member of a union. Those were replaced with the
struct that is part of that union.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sun, 9 Feb 2014 21:15:56 +0000 (15:15 -0600)]
staging: r8188eu: Remove some dead code from headers
The headers for this driver contain a number of unused structs and macros
that are removed. File include/ioctl_cfg80211.h is now empty and was
deleted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sun, 9 Feb 2014 21:15:55 +0000 (15:15 -0600)]
staging: r8188eu: Remove dead file
After the previous cleanups, file hal/odm_interface.c is now empty. It
is hereby deleted, and removed from Makefile.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sun, 9 Feb 2014 21:15:54 +0000 (15:15 -0600)]
staging: r8188eu: Replace wrapper around _rtw_memcmp()
This wrapper is replaced with a simple memcmp(). As the wrapper inverts the
logic of memcmp(), care needed to be taken.
This patch also adds one include of vmalloc.h that was missed in a previous
patch.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 11 Feb 2014 00:37:56 +0000 (16:37 -0800)]
staging: slicoss: Add MAINTAINERS entry, break README into TODO & README
Adding a MAINTAINERS entry with content from the README.
Move the TODO items from the README to a separate TODO file.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kirill Tkhai [Mon, 10 Feb 2014 18:36:23 +0000 (22:36 +0400)]
staging: slicoss: Fix possible reuse of freed memory in timer function
Do not call kfree() till timer function is finished.
[This was found using grep. Compiled tested only]
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Joe Perches <joe@perches.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 9 Feb 2014 08:40:45 +0000 (14:10 +0530)]
staging: rtl8188eu: remove header file ip.h
"ip.h" is included in four files but not being used, so
remove "include/ip.h" header file and inclusion of this header file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 9 Feb 2014 08:40:44 +0000 (14:10 +0530)]
staging: rtl8188eu: remove header file if_ether.h
"if_ether.h" is included in three files but not being used, so
remove "include/if_ether.h" header file and inclusion of this header file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Mon, 10 Feb 2014 05:36:48 +0000 (14:36 +0900)]
staging : android : sync : fix a checkpatch warning
- WARNING: missing space after return type
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Mon, 10 Feb 2014 05:38:05 +0000 (14:38 +0900)]
staging: android: timed_output: fix a checkpatch warning
- WARNING: Multiple spaces after return type
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Mon, 10 Feb 2014 11:16:50 +0000 (20:16 +0900)]
staging : ion : Fix some checkpatch warnings and an error
Warning:
- Unnecessary space after function pointer name
- quoted string split across lines
- fix alignment issues
Error:
- return is not a function, parentheses are not required
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Sat, 8 Feb 2014 02:59:40 +0000 (11:59 +0900)]
staging: android: binder: use whitespace consistently
Whitespace between #define keyword and BINDER_* constants are space in
some point and tab in some point. Using space or tab is just writer's
choice. But, let's use them more consistently.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chase Southwood [Sat, 8 Feb 2014 05:02:27 +0000 (23:02 -0600)]
Staging: comedi: fix memory leak in comedi_bond.c
We allocate bdev and then krealloc the devs pointer in order to add bdev
at the end of the devpriv->devs array list. But if for some reason this
krealloc fails, we need to free bdev before returning an error otherwise
this memory is leaked.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Bolle [Sun, 9 Feb 2014 15:13:26 +0000 (16:13 +0100)]
Staging: rtl8812ae: remove undefined Kconfig macros
There are references to four undefined Kconfig macros in the code.
Remove these as the checks for them will always evaluate to false.
There are additional cleanups possible now, but I'll gladly leave those
to people that are actually familiar with the code.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Bolle [Tue, 11 Feb 2014 12:31:32 +0000 (13:31 +0100)]
staging: r8188eu: default to "y" in Kconfig
Two Kconfig entries for this driver default to (uppercase) "Y". But in
Kconfig (lowercase) "y" is a magic symbol. "Y" is an ordinary symbol.
As "Y" is never set these Kconfig symbols will also not be set by
default.
So use "default y" here, as was clearly intended.
Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Surendra Patil [Sun, 9 Feb 2014 07:30:27 +0000 (23:30 -0800)]
drivers:staging:rtl8821ae: Fixed few coding style erors and warnings
Fixed multiple coding style errors and warnings
wifi.h:1077: WARNING: please, no space before tabs
wifi.h:762: WARNING: missing space after struct definition
wifi.h:972: WARNING: please, no spaces at the start of a line
wifi.h:1825: WARNING: Unnecessary space after function pointer name
wifi.h:1826: ERROR: "foo * bar" should be "foo *bar"
wifi.h:1099: WARNING: missing space after return type
wifi.h:1320: ERROR: Macros with complex values should be enclosed in parenthesis
wifi.h:1758: WARNING: Multiple spaces after return type
wifi.h:1855: ERROR: code indent should use tabs where possible
wifi.h:2303: ERROR: space prohibited after that open parenthesis '('
wifi.h:2408: ERROR: spaces required around that '=' (ctx:VxV)
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sat, 8 Feb 2014 00:38:50 +0000 (18:38 -0600)]
staging: r8188eu: Fix missing header
Commit
2397c6e0927675d983b34a03401affdb64818d07 entitled "staging: r8188eu:
Remove wrappers around vmalloc and vzalloc" and
commit:
03bd6aea7ba610a1a19f840c373624b8b0adde0d entitled "staging: r8188eu:
Remove wrappers around vfree" failed to add the header file needed
to provide vzalloc and vfree.
This problem was reported by the kbuild test robot.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Tue, 11 Feb 2014 09:52:05 +0000 (02:52 -0700)]
staging/lustre/llite: fix O_TMPFILE/O_LOV_DELAY_CREATE conflict
In kernel 3.11 O_TMPFILE was introduced, but the open flag value
conflicts with the O_LOV_DELAY_CREATE flag
020000000 previously used
by Lustre-aware applications. O_LOV_DELAY_CREATE allows applications
to defer file layout and object creation from open time (the default)
until it can instead be specified by the application using an ioctl.
Instead of trying to find a non-conflicting O_LOV_DELAY_CREATE flag
or define a Lustre-specific flag that isn't of use to most/any other
filesystems, use (O_NOCTTY|FASYNC) as the new value. These flags
are not meaningful for newly-created regular files and should be
OK since O_LOV_DELAY_CREATE is only meaningful for new files.
I looked into using O_ACCMODE/FMODE_WRITE_IOCTL, which allows calling
ioctl() on the minimally-opened fd and is close to what is needed,
but that doesn't allow specifying the actual read or write mode for
the file, and fcntl(F_SETFL) doesn't allow O_RDONLY/O_WRONLY/O_RDWR
to be set after the file is opened.
Lustre-change: http://review.whamcloud.com/8312
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4209
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 9 Feb 2014 07:51:49 +0000 (02:51 -0500)]
lustre: don't leak llog handle in llog_cat_process_cb()
An early return from llog_cat_process_cb() was leaking the llog
handle. Fix this by not doing that.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/7847
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4054
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Perepechko [Sun, 9 Feb 2014 07:51:48 +0000 (02:51 -0500)]
lustre/xattr: separate ACL and XATTR caches
This patch separates ACL and XATTR caches, so that
when updating an ACL only LOOKUP lock is needed and
when updating another XATTR only XATTR lock is needed.
This patch also reverts XATTR cache support for setxattr
because client performing REINT under even PR lock
will deadlock if an active server operation (like unlink)
attempts to cancel all locks, and setxattr has to wait
for it (MDC max-in-flight is 1).
This patch disables the r/o cache if the data is
unreasonably large (larger than maximum single EA
size).
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/7208
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3669
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yang sheng [Sun, 9 Feb 2014 07:51:47 +0000 (02:51 -0500)]
lustre: instantiate negative dentry
In the atomic_open callback. We should instantiate
negative dentry. Else will got sanity:183 failed.
Signed-off-by: yang sheng <yang.sheng@intel.com>
Reviewed-on: http://review.whamcloud.com/8110
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3228
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Swapnil Pimpale [Sun, 9 Feb 2014 07:51:46 +0000 (02:51 -0500)]
lustre: Unsafe error handling around ll_splice_alias
Callers of ll_splice_alias() should not assign the returned pointer to
the dentry since it can be an err pointer. Fixed the above bug using a
temporary dentry pointer. This temporary pointer is assigned to dentry
only if ll_splice_alias has not returned an err pointer.
Signed-off-by: Swapnil Pimpale <spimpale@ddn.com>
Reviewed-on: http://review.whamcloud.com/7460
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3807
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 9 Feb 2014 07:51:45 +0000 (02:51 -0500)]
lustre/lov: avoid subobj's coh_parent race
* during a file lov object initialization, we need protect the access
and change of its subobj->coh_parent, since it could be another
layout change race there, which makes an unreferenced lovsub obj in
the site object hash table.
* dump lovsub objects in the site if the lovsub device reference > 0
during its finalization phase.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/6105
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1480
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 8 Feb 2014 21:38:28 +0000 (13:38 -0800)]
Merge branch 'staging-linus' into staging-work
This is to pull in the lustre fixes so that others can continue to work
on updating the lustre codebase, as well as resolve some merge issues
with the ion and ocproto drivers to keep linux-next happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 8 Feb 2014 21:29:18 +0000 (13:29 -0800)]
Merge tag 'iio-fixes-for-3.14b' of git://git./linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second round of IIO fixes for the 3.14 cycle.
Another mixed bag, including some that were not in round 1 because
they applied to elements that went in during the merge window whereas
round 1 predated that. I have been effectively out of action for 3 weeks
so will take a little while to catch up with my backlog.
* mag3110 - report busy in read_raw / write_raw when buffered capture
is underway to avoid either changing the characteristics of the capture or
causing capture issues by reading data destined for the buffer.
* mag3110 - fix a failure to specify leading zeros when formatting a decimal
number.
* lradc - fix a buffer overflow and incorrect reporting of scale for voltage
channel 15
* lradc - drop some scale_available attributes for elements that don't actually
exist. These could otherwise cause some interesting issues for userspace.
* ad799x - a typo in the events information mask resulted in some nasty crashes
on failed probes.
* ak8975 - fix scale attribute output to avoid incorrect intepretation of
readings in userspace.
* adis16400 - make sure the timestamp is the last element in all channel_spec
arrays as this assumption is made by the buffer filling code, but was not
true previously.
* bma180 - correctly use modifiers to distinguish the channels rather than
indexes. This brings the abi inline with the standard option for 3 axis
accelerometers.
* max1363 - use devm_regulator_get_optional instead of the non optional case
to allow the device to successfully probe when a regulator is not specified.
Manuel Stahl [Fri, 2 May 2014 09:34:00 +0000 (10:34 +0100)]
iio: imu: inv_mpu6050: Fix typo and formatting
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Manuel Stahl [Fri, 2 May 2014 09:34:00 +0000 (10:34 +0100)]
iio: imu: mpu6050: Move config entry into IMU menu
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Guenter Roeck [Mon, 27 Jan 2014 18:10:00 +0000 (18:10 +0000)]
iio: max1363: Use devm_regulator_get_optional for optional regulator
In kernel version 3.13, devm_regulator_get() may return no error
if a regulator is undeclared. regulator_get_voltage() will return
-EINVAL if this happens. This causes the driver to fail loading if
the vref regulator is not declared.
Since vref is optional, call devm_regulator_get_optional instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 1 Oct 2014 20:37:00 +0000 (21:37 +0100)]
iio:accel:bma180: Use modifier instead of index in channel specification
This driver was not complying with the ABI and the purpose of this patch
is to bring it inline so that userspace will correctly identify the channels.
Should use channel modifiers (X/Y/Z), not channel indices
timestamp channel has scan index 3, not 4
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Kravchenko Oleksandr <x0199363@ti.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Marcus Folkesson [Fri, 24 Jan 2014 11:24:00 +0000 (11:24 +0000)]
iio: adis16400: Set timestamp as the last element in chan_spec
This is necessary since timestamp is calculated as the last element
in iio_compute_scan_bytes().
Without this fix any userspace code reading the layout of the buffer via
sysfs will incorrectly interpret the data leading some nasty corruption.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Beomho Seo [Wed, 2 Apr 2014 08:16:00 +0000 (09:16 +0100)]
iio: ak8975: Add device name
This patch add device name.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Beomho Seo [Wed, 2 Apr 2014 08:15:00 +0000 (09:15 +0100)]
iio: ak8975: Fix calculation formula for convert micro tesla to gauss unit
This effects the reported scale of the raw values, and thus userspace
applications that use this value.
One micro tesla equal 0.01 gauss. So I have fixed calculation formula And add RAW_TO_GAUSS macro.
ASA is in the range of 0 to 255. If multiply 0.003, calculation result(in_magn_[*]_scale) is
always 0. So multiply 3000 and return and IIO_VAL_INT_PLUS_MICRO.
As a result, read_raw call back function return accurate scale value.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Hartmut Knaack [Fri, 1 Aug 2014 23:07:00 +0000 (00:07 +0100)]
staging:iio:ad799x fix typo in ad799x_events[]
This patch fixes a typo in ad799x_events[], which caused the error "Failed to register event set".
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alexandre Belloni [Mon, 13 Jan 2014 16:02:00 +0000 (16:02 +0000)]
iio: mxs-lradc: remove useless scale_available files
in_voltage8_scale_available and in_voltage9_scale_available are exposed to
userspace but useless as in_voltage8_raw and in_voltage9_raw are not available.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alexandre Belloni [Mon, 13 Jan 2014 16:02:00 +0000 (16:02 +0000)]
iio: mxs-lradc: fix buffer overflow
Fixes:
drivers/staging/iio/adc/mxs-lradc.c:1556 mxs_lradc_probe() error: buffer
overflow 'iio->channels' 15 <= 15
The reported available scales for in_voltage15 were also wrong.
The realbits lookup is not necessary as all the channels of the LRADC have the
same resolution, use LRADC_RESOLUTION instead.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 1 Oct 2014 20:59:00 +0000 (21:59 +0100)]
iio:magnetometer:mag3110: Fix output of decimal digits in show_int_plus_micros()
need to print leading zeros, hence "%d.%06d"
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 1 Oct 2014 20:59:00 +0000 (21:59 +0100)]
iio:magnetometer:mag3110: Report busy in _read_raw() / write_raw() when buffer is enabled
individual reads are not permitted concurrently with buffered reads
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Maurizio Lombardi [Wed, 5 Feb 2014 15:46:56 +0000 (16:46 +0100)]
wlags49_h2: Fix overflow in wireless_set_essid()
This patch prevents the wireless_set_essid() function from overwriting
the last byte of the NetworkName buffer which must be NULL.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 5 Feb 2014 11:56:43 +0000 (11:56 +0000)]
xlr_net: Fix missing trivial allocation check
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 3 Feb 2014 22:38:35 +0000 (01:38 +0300)]
staging: r8188eu: overflow in rtw_p2p_get_go_device_address()
The go_devadd_str[] array is two characters too small to hold the
address so we corrupt memory.
I've changed the user space API slightly and I don't have a way to test
if this breaks anything. In the original code we truncated away the
last digit of the address and the NUL terminator so it was already a bit
broken.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 3 Feb 2014 22:38:03 +0000 (01:38 +0300)]
staging: r8188eu: array overflow in rtw_mp_ioctl_hdl()
MAX_MP_IOCTL_SUBCODE (35) and mp_ioctl_hdl (32 elements) are no longer
in sync. It leads to a bogus pointer dereference.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 3 Feb 2014 04:23:06 +0000 (22:23 -0600)]
staging: r8188eu: Fix typo in USB_DEVICE list
There is a typo in the device list that interchanges the vendor and
product codes for one of the entries. This exchange was determined
by noticing that the vendor code is 0x07b8 for Abocom at
http://www.linux-usb.org/usb.ids.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heinrich Schuchardt [Tue, 28 Jan 2014 20:16:46 +0000 (21:16 +0100)]
usbip/userspace/libsrc/names.c: memory leak
revised patch
p is freed if NULL.
p is leaked if second calloc fails.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 22 Jan 2014 14:20:03 +0000 (17:20 +0300)]
gpu: ion: dereferencing an ERR_PTR
We dereference "heap->task" before checking if it's an ERR_PTR.
Fixes:
ea313b5f88ed ('gpu: ion: Also shrink memory cached in the deferred free list')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 21 Jan 2014 17:39:05 +0000 (17:39 +0000)]
staging: comedi: usbduxsigma: fix unaligned dereferences
There are a couple of dereferences such as `*(uint32_t
*)(devpriv->insn_buf + 1)` that are unaligned as `devpriv->insn_buf` is
of type `uint8_t *`. This works on x86 architecture but may not be
supported on other architectures. Call `get_unalign()` to perform the
unaligned dereferences.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 21 Jan 2014 17:06:34 +0000 (17:06 +0000)]
staging: comedi: fix too early cleanup in comedi_auto_config()
`comedi_auto_config()` is usually called from the probe routine of a
low-level comedi driver to allocate and auto-configure a comedi device.
Part of this involves calling the low-level driver's `auto_attach()`
handler, and if that is successful, `comedi_device_postconfig()` tries
to complete the configuration of the comedi device. If either of those
fail, `comedi_device_detach()` is called to clean up, and
`comedi_release_hardware_device()` is called to remove the dynamically
allocated comedi device.
Unfortunately, `comedi_device_detach()` clears the `hw_dev` member of
the `struct comedi_device` (indirectly via `comedi_clear_hw_dev()`), and
that stops `comedi_release_hardware_device()` finding the comedi device
associated with the hardware device, so the comedi device won't be
removed properly.
Since `comedi_release_hardware_device()` also calls
`comedi_device_detach()` (assuming it finds the comedi device associated
with the hardware device), the fix is to remove the direct call to
`comedi_device_detach()` from `comedi_auto_config()` and let the call to
`comedi_release_hardware_device()` take care of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 20 Jan 2014 10:30:01 +0000 (13:30 +0300)]
staging: android: ion: dummy: fix an error code
We should be returning -ENOMEM here instead of zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salym Senyonga [Sat, 25 Jan 2014 09:54:41 +0000 (12:54 +0300)]
Staging: ozwpan: Change kmalloc() to kzalloc()
changing to kzalloc lets us get rid of some lines. The other concern
here is that some members of binding->ptype are still uninitialized at
the end of the function.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salym Senyonga [Sat, 25 Jan 2014 09:54:40 +0000 (12:54 +0300)]
Staging: ozwpan: reduce indent levels in oz_binding_add().
When hit error then we can return immediately. This makes the code
simpler and lets us remove some indenting.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salym Senyonga [Sat, 25 Jan 2014 09:54:39 +0000 (12:54 +0300)]
Staging: ozwpan: Fix null dereference
If net_dev is NULL memcpy() will Oops.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Fri, 24 Jan 2014 18:34:13 +0000 (11:34 -0700)]
staging/usbip: userspace to use linux header for usb_device_speed enum, missing speeds to speed_strings array
Remove usb_device_speed enum define from usbip_common.h and change it to
include linux/usb/ch9.h instead. Add speed strings for usb wireless and 3.0
to speed_strings array.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Fri, 24 Jan 2014 16:25:05 +0000 (09:25 -0700)]
staging/usbip: simplify usbip_dump_usb_device() udev->speed handling
Change usbip_dump_usb_device() to use usb_speed_string() and remove the
code that does switch on udev->speed and builds custom speed strings.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Valentina Manea [Thu, 23 Jan 2014 21:12:29 +0000 (23:12 +0200)]
staging: usbip: convert usbip-host driver to usb_device_driver
This driver was previously an interface driver. Since USB/IP
exports a whole device, not just an interface, it would make
sense to be a device driver.
This patch also modifies the way userspace sees and uses a
shared device:
* the usbip_status file is no longer created for interface 0, but for
the whole device (such as
/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/usbip_status).
* per interface information, such as interface class or protocol, is
no longer sent/received; only device specific information is
transmitted.
* since the driver was moved one level below in the USB architecture,
there is no need to bind/unbind each interface, just the device as a
whole.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Wed, 22 Jan 2014 21:24:29 +0000 (14:24 -0700)]
staging/usbip: Change vhci_hcd store_attach() device information message to include speed string
Change vhci_hcd store_attach() routine to include speed string in its device
information message. The current call to dev_info() prints out speed number
which is the enum number. Change to call usb_speed_string() to print speed
string in addition to the number.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Tue, 21 Jan 2014 19:18:34 +0000 (12:18 -0700)]
staging/usbip: remove vhci_hcd vhci_hub_status change message
When vhci_hcd is enabled, the following message floods the dmesg buffer.
This message doesn't provide any useful information other than cluttering
the dmesg buffer. Fix it by removing the message. There is another debug
message in this routine that dumps detailed port status change information.
[ 4062.716662] vhci_hcd: changed 0
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 3 Feb 2014 18:26:51 +0000 (11:26 -0700)]
staging: comedi: drivers: return '0' for successful attach
The comedi core expects the driver attach functions to return a
negative errno for failure. Any other value indicates success.
For consistency in the drivers, make sure they all return '0' to
indicate success.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 3 Feb 2014 18:26:50 +0000 (11:26 -0700)]
staging: comedi: drivers: remove final 'attach' messages
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 3 Feb 2014 17:43:27 +0000 (10:43 -0700)]
staging: comedi: amplc_pci230: standardize error handling of subdev_8255_init()
The subdev_8255_init() call returns 0 for success of a negative errno for failure.
For aesthetics, change the error test in this driver from (rc < 0) to simply (rc)
to follow the style of the other users of this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 3 Feb 2014 17:43:26 +0000 (10:43 -0700)]
staging: comedi: amplc_pc236: remove dev_err() message due to allocation failure
The subdev_8255_init() call can only fail due to the allocation of the private
data. This failure will alreay have produced an error message. Remove the
redundant dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 3 Feb 2014 17:43:25 +0000 (10:43 -0700)]
staging: comedi: drivers: propogate errno from subdev_8255_init()
The initialization of the 8255 subdevice can fail due to the allocation
of the private data. Make sure all callers of subdev_8255_init() propogate
the errno.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:47 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_InitializeTimer
This wrapper is not used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:46 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_SetTimer
This wrapper is not used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:45 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_CompareMemory
This routine is a wrapper for _rtw_memcmp(), which is a wrapper for memcmp.
In a later change, _rtw_memcmp will be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:44 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_AllocateMemory
This wrapper for vzalloc() is not used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:43 +0000 (20:45 -0600)]
staging: r8188eu: Remove wrappers around vfree
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:42 +0000 (20:45 -0600)]
staging: r8188eu: Remove wrappers around vmalloc and vzalloc
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:41 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_Write4Byte
This routine is the equivalent of rtw_write32.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:40 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_Write2Byte
This routine is the equivalent of rtw_write16.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:39 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_Write1Byte
This routine is the equivalent of rtl_write6.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:38 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_Read4Byte
This routine is essentially a duplicate of rtw_read32.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:37 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_Read2Byte
This routine is never used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 7 Feb 2014 02:45:36 +0000 (20:45 -0600)]
staging: r8188eu: Remove ODM_Read1Byte
This is essentially a synonym for rtw_read8.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Tue, 4 Feb 2014 08:36:39 +0000 (17:36 +0900)]
staging: cxt1e1: remove unnecessary function, VMETRO_TRACE
VMETRO_TRACE isn't called from anywhere. So delete it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhao, Gang [Wed, 5 Feb 2014 16:10:35 +0000 (00:10 +0800)]
staging: et131x: remove spinlock adapter->lock
adapter->lock is only used in et131x_multicast(), which is eventually
called by network stack function __dev_set_rx_mode(). __dev_set_rx_mode()
is always called by (net_device *)dev->addr_list_lock hold, to protect from
concurrent access. So adapter->lock is redundant.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhao, Gang [Wed, 5 Feb 2014 16:10:34 +0000 (00:10 +0800)]
staging: et131x: stop read when hit max delay in et131x_phy_mii_read
stop read and return error when hit max delay time.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Thu, 6 Feb 2014 12:12:03 +0000 (10:12 -0200)]
imx-drm: imx-hdmi: Remove parentheses from returns
Fix the following checkpatch warnings:
ERROR: return is not a function, parentheses are not required
#462: FILE: drivers/staging/imx-drm/imx-hdmi.c:462:
+ return (hdmi->hdmi_data.enc_in_format !=
ERROR: return is not a function, parentheses are not required
#468: FILE: drivers/staging/imx-drm/imx-hdmi.c:468:
+ return ((hdmi->hdmi_data.enc_out_format == YCBCR422_8BITS) &&
ERROR: return is not a function, parentheses are not required
#475: FILE: drivers/staging/imx-drm/imx-hdmi.c:475:
+ return ((hdmi->hdmi_data.enc_in_format == YCBCR422_8BITS) &&
While at it, broke the return code from is_color_space_decimation() and
is_color_space_interpolation() for better readability
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jingoo Han [Wed, 5 Feb 2014 02:49:36 +0000 (11:49 +0900)]
Staging: rtl8812ae: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Hansen [Mon, 3 Feb 2014 22:40:25 +0000 (14:40 -0800)]
staging: rtl8192u: remove unused files
I was doing some code audits looking at scattergather uses, and noticed
that update() in drivers/staging/rtl8192u/ieee80211/digest.c uses
sg.page which doesn't exist any longer, so this can't possibly compile.
Turns out that digest.c is actually unused. It doesn't get referenced
in a Makefile or get compiled and doesn't get used as far as I can see.
I then widened the search to all the files in the directory. There are
a *bunch* that look unused. I removed all of them, then added them
back one at a time until the driver compiled again.
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Cc: jerry-chuang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gary Servin [Sun, 26 Jan 2014 16:00:18 +0000 (13:00 -0300)]
staging: olpc_dcon: Trivial: Remove space before indentation.
This coding style error was detected using the checkpatch.pl script
Signed-off-by: Gary Servin <garyservin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log