Input: pmouse - introduce proper locking so state-changing
       operations do not iterfere with each other.
       Also make sure that serio core takes serio->drv_sem
       not only for connect/disconnect but for reconnect
       too.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: mousedev - do not wake up readers when receiving 0-motion
       event.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: do not corrupt system-wide procfs fops.

entry->proc_fops is a pointer to struct file_operations. When we
call create_proc_entry(...), it pointis to proc_file_operations,
deep in fs/proc/generic.c. By adding a 'poll' member to this struct
we effectively force the 'poll' member on every file in /proc,
which is wrong (they all fail select(...) calls).

This patch changes a copy of entry->proc_fops and reassigns it rather
than changing the original member.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: return correct value when setting up absolute device via uinipt.

uinput_alloc_device() is supposed to return the number of bytes read,
the value is returned to uinput_write() and from there to userspace. If
EV_ABS is set then it returns the value from uinput_validate_absbits()
instead, which is zero when everything is ok instead of the count.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Acked-by: Aristeu Rozanski <aris@cathedrallabs.org>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ALPS - fix forward/back buttons on Ahtec laptop.

I have an Ahtec laptop with a ALPS GlidePoint device, with 4 buttons.
With Linux hernel 2.6.12rc4 and rc5 I'm unable to use the vertical
scroll buttons (BACK and FORWARD).

BACK gets detected as BTN_MIDDLE and FORWARD is undetected.

I've modified the drivers/input/mouse/alps.c from 2.6.12rc5 and now it
works fine!

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: kill empty comment in gameport support section of
       cs4281 ALSA driver.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ES1371 (OSS) - do not carry around gameport code if gameport
       core support is disabled.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ES1370 (OSS) - do not carry around gameport code if gameport
       core support is disabled.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: make sure that joystick support in CMPCI driver can only be
       selected if either gameport is built-in or _both_ gameport
       and cmpci are built as modules.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: mad16 (OSS) - do not carry around gameport code if gameport core
       support is disabled.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: sonicvibes (OSS) - do not carry around gameport code if gameport
       core support is disabled.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: trident (OSS) - do not carry around gameport code if gameport
       core support is disabled, some formatting changes.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ESS Solo (OSS) - do not carry around gameport code if gameport
       core support is disabled.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: switch gameport core to using kthread API instead of
       using daemonize() and signals. This way kgameportd will
       never be accidentially killed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: switch serio core to using kthread API instead of using
       daemonize() and signals. This way kseriod will never be
       accidentially killed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Merge ... /linux/kernel/git/torvalds/linux-2.6

[PATCH] cpufreq-stats driver documentation

Documentation for cpufreq stats.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] cpufreq-stats driver updates

Changes to the cpufreq stats driver:
* Changes the way P-state transition table looks in /sysfs providing more
  clear output
* Changes the time unit in the output from HZ to clock_t

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Typos.

cpfureq developers cant spel.

Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] longhaul - adjust transition latency.

From patch by: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Longhaul: Magic timer frobbing.

As mandated by the spec, disable timer around transitions.

From code by : Ken Staton <ken_staton@agilent.com
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] longhaul - disable PCI mastering around transition.

The spec states that we have to do this, which is *horrid*.

Based on code from: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand governor default sampling downfactor as 1

[PATCH] [5/5] ondemand governor default sampling downfactor as 1

Make default sampling downfactor 1.
This works better with earlier auto downscaling change in ondemand governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand governor automatic downscaling

[PATCH] [4/5] ondemand governor automatic downscaling

Here is a change of policy for the ondemand governor. The modification
concerns the frequency downscaling. Instead of decreasing to a lower
frequency when the CPU usage is under 20%, this new policy automatically
scales to the optimal frequency. The optimal frequency being the lowest
frequency which provides enough power to not trigger the upscaling policy.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand,conservative governor idle_tick clean-up

[PATCH] [3/5] ondemand,conservative governor idle_tick clean-up

Ondemand and conservative governor clean-up, it factorises the idle ticks
measurement.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand,conservative governor store the idle ticks for all cpus

[PATCH] [2/5] ondemand,conservative governor store the idle ticks for all cpus

Ondemand, conservative governor did not store prev_cpu_idle_up into
prev_cpu_idle_down for other CPUs than the current CPU.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand,conservative minor bug-fix and cleanup

[PATCH] [1/5] ondemand,conservative minor bug-fix and cleanup

Attached patch fixes some minor issues with Alexander's patch and related
cleanup in both ondemand and conservative governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Allow ondemand stepping to be changed by user.

Adds support so that the cpufreq change stepping is no longer fixed at 5% and
can be changed dynamically by the user

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Prevents un-necessary cpufreq changes if we are already at min/max

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Add support to cpufreq_ondemand to ignore 'nice' cpu time

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Conservative cpufreq governer

A new cpufreq module, based on the ondemand one with my additional patches
just posted.  This one is more suitable for battery environments where its
probably more appealing to have the cpu freq gracefully increase and decrease
rather than flip between the min and max freq's.

N.B. Bruno Ducrot pointed out that the amd64's "do have unacceptable latency
between min and max freq transition, due to the step-by-step requirements
(200MHz IIRC)"; so AMD64 users would probably benefit from this too.

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] fix up comment in cpufreq.h

Fix up comment in cpufreq.h stating transition latency should be passed
in microseconds -- it was decided long ago to switch to nanoseconds.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] dual-core powernow-k8

With the release of the dual-core AMD Opterons last week,
it's high time that cpufreq supported them.  The attached
patch applies cleanly to 2.6.12-rc3 and updates powernow-k8
to support the latest Athlon 64 and Opteron processors.

Update the driver to version 1.40.0 and provide support
for dual-core processors.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] make cpufreq_gov_dbs static

This patch makes a needlessly global and EXPORT_SYMBOL'ed struct static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Recalibrate cpu_khz [2/2]

Some cpufreq drivers (at that time, only powernow-k7) need to recalibrate the
cpu_khz at runtime.

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Recalibrate cpu_khz [1/2]

We have to recalibrate cpu_khz in order to use the current FID instead the max
FID since some BIOS do not put the processor at maximum frequency at POST.
Also, some BIOS will change the processor frequency at our back after cpu_khz
was calibrate.  Finally, this will fix a long standing bug when we do
something like this:

# rmmod powernow-k7
# modprobe powernow-k7

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] AMD Elan SC520 cpufreq driver.

From: Sean Young <sean@mess.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Add warning comment about default governors.

This comes up time and time again. Until its fixed, place this
comment in the Kconfig which should stem the flow of resubmissions.

Signed-off-by: Rob Weryk <rjweryk@uwo.ca>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] speedstep-smi: it works on at least one P4M

The speedstep-smi driver actually works on >=1 notebook with a
Pentium 4-M CPU where all other cpufreq drivers fail. Therefore,
allow speedstep-smi on P4Ms again, but warn users of likely failure

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand: trivial clean-ups

Trivial ondemand governor clean-ups:
- change from sampling_rate_in_HZ() to the official function
usecs_to_jiffies().
- use for_each_online_cpu() to instead of using "if (cpu_online(i))"

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) support

The Pentium 4 - Ms (HT) with CPUID 0xF34 and 0xF41 seem to support
centrino-like enhanced speedstep; however, no "table" support is possible.
Therefore, put NULL entries into speedstep-centrino.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] cpufreq-core: reduce warning messages.

cpufreq core is printing out messages at KERN_WARNING level that the core
recovers from without intervention, and that the system administrator can
do nothing about.  Patch below reduces the severity of these messages to
debug.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] powernow-k7: don't print khz element of FSB.

Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] UDF filesystem: array '__mon_yday' declared as not static

in fs/udf/udftime.c the global array '__mon_yday' is not static, and it
conflicts with the glibc one when the kernel is compiled as user mode.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcdp.c build fix

In file included from drivers/firmware/pcdp.c:18:
drivers/firmware/pcdp.h:48: error: field `addr' has incomplete type
drivers/firmware/pcdp.c: In function `setup_serial_console':
drivers/firmware/pcdp.c:27: error:  `ACPI_ADR_SPACE_SYSTEM_MEMORY' undeclared (first use in this  function)

Cc: <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] flush icache in correct context

flush_icache_range() is used in two different situation - in binfmt_elf.c &
co for user space mappings and module.c for kernel modules.  On m68k
flush_icache_range() doesn't know which data to flush, as it has separate
address spaces and the pointer argument can be valid in either address
space.

First I considered splitting flush_icache_range(), but this patch is
simpler.  Setting the correct context gives flush_icache_range() enough
information to flush the correct data.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: allow timer based profiling on iseries

We used to have an iseries specific profiler that used /proc/profile.  Now
thats gone we can use the generic timer based stuff.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] h8300 sleep problem

h8300 appears to sleep (halt) when need_resched IS set.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] acpi build fix: x86 setup.c

This is a neverending story

linux/acpi.h contains empty declarations for acpi_boot_init() &
acpi_boot_table_init() but they are nested inside #ifdef CONFIG_ACPI.

So we'll have to #ifdef in arch/i386/kernel/setup.c: setup_arch()

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64 CONFIG_ACPI=n build fix

Make CONFIG_X86_PM_TIMER dependent on CONFIG_ACPI

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: More fixes for compilation without CONFIG_ACPI

Suggested by Alexander Nyberg

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge ... /pub/scm/linux/kernel/git/aegl/linux-2.6

[IA64] Use "PER_CPU" form of EXPORT macro

I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros.

Signed-off-by: Tony Luck <tony.luck@intel.com>

[PATCH] Relax idecd dma alignment check

Only the address needs alignment of mask bits, length should work with
a relaxed alignment check.

Signed-off-by: Jens Axboe <axboe@suse.de>
[ This is take 2: make the length check be for 16-byte alignment, not
  just word alignment.  That should hopefully keep everybody happy,
  while still allowing CD writing with DMA ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: actually call prom_send_capabilities

When I sent in the patch adding the code for the kernel to tell the
firmware about its capabilities on pSeries machines, I included the
function to give the capabilities to firmware but somehow forgot the
hunk that adds the call to the new function.  This patch adds the
call.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge ... /pub/scm/linux/kernel/git/davem/tg3-2.6

Merge of /home/davem/src/GIT/tg3-2.6/

[NET]: Use %lx for netdev->features sysfs formatting.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Clear up user copy warning in flowlabel code.

We are intentionally ignoring the copy_to_user() value,
make it clear to the compiler too.

Noted by Jeff Garzik.

Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Add ethtool support for NETIF_F_HW_CSUM.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Kill MULTIPATHHOLDROUTE flag.

It cannot work properly, so just ignore it in drr
and rr multipath algorithms just like the random
multipath algorithm does.

Suggested by Herbert Xu.

Signed-off by: Pravin B. Shelar <pravins@calsoftinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Add is_multicast_ether_addr() in include/linux/etherdevice.h

This patch adds is_multicast_ether_addr() to go along with
is_valid_ether_addr() and friends. It then changes
is_valid_ether_addr() to use the new macro, and fixes up the comment
on that function to move implementation details out of the API doco.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Primary and secondary addresses

Add an option to make secondary IP addresses get promoted
when primary IP addresses are removed from the device.
It defaults to off to preserve existing behavior.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Automatic merge of 'misc-fixes' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

[TG3]: Fix bug in tg3_load_firmware_cpu

Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu().
It is possible that the bootcode may be loading code from nvram during
this call and stopping the cpu without getting the lock may cause
uncompleted nvram data to be left in the nvram data register. Subsequent
calls to read/write nvram data will fail.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add interrupt test

This test uses the previously added tg3_test_interrupt() to perform the
test.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add loopback test

The test will loopback one packet in MAC loopback mode and verify the
packet data.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add memory test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add register test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add parameter to tg3_halt

Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND
parameter can be passed to tg3_halt() before doing offline tests.

All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN
parameter.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add link test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add nvram test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add basic selftest infrastructure

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BRIDGE]: receive path optimization

This improves the bridge local receive path by avoiding going
through another softirq.  The bridge receive path is already being called
from a netif_receive_skb() there is no point in going through another
receiveq round trip.

Recursion is limited because bridge can never be a port of a bridge
so handle_bridge() always returns.

Signed-off-by: David S. Miller <davem@davemloft.net>

[BRIDGE]: prevent bad forwarding table updates

Avoid poisoning of the bridge forwarding table by frames that have been
dropped by filtering. This prevents spoofed source addresses on hostile
side of bridge from causing packet leakage, a small but possible security
risk.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BRIDGE]: set features based on enslaved devices

Make features of the bridge pseudo-device be a subset of the underlying
devices.  Motivated by Xen and others who use bridging to do failover.

Signed-off-by: Catalin BOIE <catab at umrella.ro>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BRIDGE]: make dev->features unsigned

The features field in netdevice is really a bitmask, and bitmask's should
be unsigned.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BRIDGE]: features change notification

Resend of earlier patch (no changes) from Catalin used to provide
device feature change notification.

Signed-off-by: Catalin BOIE <catab at umbrella.ro>
Acked-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

libata: bump version

Merge ... /spare/repo/netdev-2.6 branch use-after-unmap

Automatic merge of 'for-linus' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input

Input: apparently Lifebook touchscreens have double resolution
       compared to "classic" PS/2 mice, provide appropriate
       resolution setting handler.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: lifebook - adjust initialization routines to be in line with
       the rest of protocols in preparation to dynamic protocol
       switching.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: lifebook - various cleanups:
       - do not try to set rate and resolution in init method, let
         psmouse core do it for us. This also removes special quirks
         from the core;
       - do not disable mouse before doing full reset - meaningless;
       - some formatting and whitespace cleanups.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: Add Fujitsu Lifebook B-series touchscreen driver.

From: Kenan Esau <kenan.esau@conan.de>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: Make EVIOSCSABS work in evdev.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: HID items of width 32 (bits) or greater are incorrectly extracted
       due to a masking bug in hid-core.c:extract(). This patch fixes it
       up by forcing the mask to be 64 bits wide.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: Add a new I-Force device to the iforce driver.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: fix open/close races in joystick drivers - add a semaphore
       to the ones that register more than one input device.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: remove user counters from drivers/input/touchscreen since
       input core takes care of calling open and close methods
       only when needed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: remove user counters from drivers/usb/input since input
       core takes care of calling open and close methods only
       when needed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: remove user counters from drivers/input/mouse since input
       core takes care of calling open and close methods only
       when needed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: add semaphore and user count to input_dev structure;
       serialize open and close calls and ensure that device's
       open and close methods are only called when first user
       opens it or last user closes it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: maple_keyb - remove useless dc_kbd_open and dc_kbd_close
       functions as they are not doing anything.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: mtouchusb was indented with spaces instead of tabs, pass
       through Lindent and adjust results.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: whitespace fixes in drivers/usb/input

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: whitespace fixes in driver/input/joystick

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: whitespace fixes in drivers/input/touchscreen

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: whitespace fixes in drivers/input/keyboard

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: whitespace fixes in drivers/input/mouse

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>