USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick

commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream.

Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.

Signed-off-by: John Keeping <john@metanate.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: fix comments for GE CS1000

commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream.

Fix comments for GE CS1000 CP210x USB ID assignments.

Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs")
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for u-blox LARA-R6 family

commit 94b619a07655805a1622484967754f5848640456 upstream.

The patch is meant to support LARA-R6 Cat 1 module family.

Module USB ID:
Vendor  ID: 0x05c6
Product ID: 0x90fA

Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)

Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()

commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream.

This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.

    renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22

To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().

Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: max-3421: Prevent corruption of freed memory

commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.

The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.

To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS

commit 6abf2fe6b4bf6e5256b80c5817908151d2d33e9f upstream.

LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates
errors like:
[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start

Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Disable USB 3 device initiated lpm if exit latency is too high

commit 1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 upstream.

The device initiated link power management U1/U2 states should not be
enabled in case the system exit latency plus one bus interval (125us) is
greater than the shortest service interval of any periodic endpoint.

This is the case for both U1 and U2 sytstem exit latencies and link states.

See USB 3.2 section 9.4.9 "Set Feature" for more details

Note, before this patch the host and device initiated U1/U2 lpm states
were both enabled with lpm. After this patch it's possible to end up with
only host inititated U1/U2 lpm in case the exit latencies won't allow
device initiated lpm.

If this case we still want to set the udev->usb3_lpm_ux_enabled flag so
that sysfs users can see the link may go to U1/U2.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow

commit f62f3c20647ebd5fb6ecb8f0b477b9281c44c10a upstream.

The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.

Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].

Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.

Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix lost USB 2 remote wake

commit 72f68bf5c756f5ce1139b31daae2684501383ad5 upstream.

There's a small window where a USB 2 remote wake may be left unhandled
due to a race between hub thread and xhci port event interrupt handler.

When the resume event is detected in the xhci interrupt handler it kicks
the hub timer, which should move the port from resume to U0 once resume
has been signalled for long enough.

To keep the hub "thread" running we set a bus_state->resuming_ports flag.
This flag makes sure hub timer function kicks itself.

checking this flag was not properly protected by the spinlock. Flag was
copied to a local variable before lock was taken. The local variable was
then checked later with spinlock held.

If interrupt is handled right after copying the flag to the local variable
we end up stopping the hub thread before it can handle the USB 2 resume.

CPU0 CPU1
(hub thread) (xhci event handler)

xhci_hub_status_data()
status = bus_state->resuming_ports;
<Interrupt>
handle_port_status()
spin_lock()
bus_state->resuming_ports = 1
set_flag(HCD_FLAG_POLL_RH)
spin_unlock()
spin_lock()
if (!status)
  clear_flag(HCD_FLAG_POLL_RH)
spin_unlock()

Fix this by taking the lock a bit earlier so that it covers
the resuming_ports flag copy in the hub thread

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: sb: Fix potential ABBA deadlock in CSP driver

commit 1c2b9519159b470ef24b2638f4794e86e2952ab7 upstream.

SB16 CSP driver may hit potentially a typical ABBA deadlock in two
code paths:

 In snd_sb_csp_stop():
     spin_lock_irqsave(&p->chip->mixer_lock, flags);
     spin_lock(&p->chip->reg_lock);

 In snd_sb_csp_load():
     spin_lock_irqsave(&p->chip->reg_lock, flags);
     spin_lock(&p->chip->mixer_lock);

Also the similar pattern is seen in snd_sb_csp_start().

Although the practical impact is very small (those states aren't
triggered in the same running state and this happens only on a real
hardware, decades old ISA sound boards -- which must be very difficult
to find nowadays), it's a real scenario and has to be fixed.

This patch addresses those deadlocks by splitting the locks in
snd_sb_csp_start() and snd_sb_csp_stop() for avoiding the nested
locks.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7b0fcdaf-cd4f-4728-2eae-48c151a92e10@gmail.com
Link: https://lore.kernel.org/r/20210716132723.13216-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ftrace: fix ftrace_update_ftrace_func implementation

commit f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream.

s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected.
At the same time implementation of ftrace_caller is not compliant with
HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of
ftrace_update_ftrace_func() and calls ftrace_trace_function() directly.

The subtle difference is that during ftrace code patching ftrace
replaces function tracer via ftrace_update_ftrace_func() and activates
it back afterwards. Unexpected direct calls to ftrace_trace_function()
during ftrace code patching leads to nullptr-dereferences when tracing
is activated for one of functions which are used during code patching.
Those function currently are:
copy_from_kernel_nofault()
copy_from_kernel_nofault_allowed()
preempt_count_sub() [with debug_defconfig]
preempt_count_add() [with debug_defconfig]

Corresponding KASAN report:
 BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0
 Read of size 4 at addr 0000000000001e08 by task migration/0/15

 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d
 Hardware name: IBM 3906 M04 704 (LPAR)
 Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218
 Call Trace:
  [<0000000001f77caa>] show_stack+0x16a/0x1d0
  [<0000000001f8de42>] dump_stack+0x15a/0x1b0
  [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0
  [<000000000082b0ca>] kasan_report+0x152/0x1c0
  [<00000000004cfd8e>] function_trace_call+0x316/0x3b0
  [<0000000001fb7082>] ftrace_caller+0x7a/0x7e
  [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10
  [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0
  [<000000000014605c>] ftrace_make_call+0xb4/0x1f8
  [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8
  [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0
  [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78
  [<000000000042395c>] multi_cpu_stop+0x224/0x3e0
  [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0
  [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708
  [<00000000002329ea>] kthread+0x342/0x408
  [<00000000001066b2>] __ret_from_fork+0x92/0xf0
  [<0000000001fb57fa>] ret_from_fork+0xa/0x30

 The buggy address belongs to the page:
 page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1
 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff)
 raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000
 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
                       ^
  0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 ==================================================================

To fix that introduce ftrace_func callback to be called from
ftrace_caller and update it in ftrace_update_ftrace_func().

Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "MIPS: add PMD table accounting into MIPS'pmd_alloc_one"

This reverts commit fc5705b28e51f61c5549679fe6b433dc9471cffc which is
commit ed914d48b6a1040d1039d371b56273d422c0081e upstream.

Commit b2b29d6d011944 (mm: account PMD tables like PTE tables) is
introduced between v5.9 and v5.10, so this fix (commit 002d8b395fa1)
should NOT apply to any pre-5.10 branch.

Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: Avoid mixing integer types in mem_rw()

[ Upstream commit d238692b4b9f2c36e35af4c6e6f6da36184aeb3e ]

Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.

Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.

Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Souza Cascardo <cascardo@canonical.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"

[ Upstream commit f3a1a937f7b240be623d989c8553a6d01465d04f ]

This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd.

While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.

The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.

For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org
Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: Fix protect handling in WRITE SAME(32)

[ Upstream commit 6d8e7e7c932162bccd06872362751b0e1d76f5af ]

WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st
byte instead of 10th byte.

Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com
Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Fix iface sysfs attr detection

[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ]

A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.

Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netrom: Decrease sock refcount when sock timers expire

[ Upstream commit 517a16b1a88bdb6b530f48d5d153478b2552d9a8 ]

Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use
sock timer API. It replaces mod_timer() by sk_reset_timer(), and
del_timer() by sk_stop_timer().

Function sk_reset_timer() will increase the refcount of sock if it is
called on an inactive timer, hence, in case the timer expires, we need to
decrease the refcount ourselves in the handler, otherwise, the sock
refcount will be unbalanced and the sock will never be freed.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com
Fixes: 63346650c1a9 ("netrom: switch to sock timer API")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: decnet: Fix sleeping inside in af_decnet

[ Upstream commit 5f119ba1d5771bbf46d57cff7417dcd84d3084ba ]

The release_sock() is blocking function, it would change the state
after sleeping. use wait_woken() instead.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix uninit-value in caif_seqpkt_sendmsg

[ Upstream commit 991e634360f2622a683b48dfe44fe6d9cb765a09 ]

When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.

=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
 ___sys_sendmsg net/socket.c:2397 [inline]
 __sys_sendmmsg+0x808/0xc90 net/socket.c:2480
 __compat_sys_sendmmsg net/compat.c:656 [inline]

Reported-by: syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8
Fixes: bece7b2398d0 ("caif: Rewritten socket implementation")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]

[ Upstream commit 91091656252f5d6d8c476e0c92776ce9fae7b445 ]

Currently array jit->seen_reg[r1] is being accessed before the range
checking of index r1. The range changing on r1 should be performed
first since it will avoid any potential out-of-range accesses on the
array seen_reg[] and also it is more optimal to perform checks on r1
before fetching data from the array. Fix this by swapping the order
of the checks before the array access.

Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20210715125712.24690-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: mediatek: fix fifo rx mode

[ Upstream commit 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 ]

In FIFO mode were two problems:
- RX mode was never handled and
- in this case the tx_buf pointer was NULL and caused an exception

fix this by handling RX mode in mtk_spi_fifo_transfer

Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Peter Hess <peter.hess@ph-home.de>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe-file: Delete namelist in del_events() on the error path

[ Upstream commit e0fa7ab42232e742dcb3de9f3c1f6127b5adc019 ]

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.

This patch adds a goto label before the deallocation and makes the error
path jump to it.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test bpf: Free obj_buf

[ Upstream commit 937654ce497fb6e977a8c52baee5f7d9616302d9 ]

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

The first of these leaks is caused by obj_buf never being deallocated in
__test__bpf.

This patch adds the missing free.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/60f3ca935fe6672e7e866276ce6264c9e26e4c87.1626343282.git.rickyman7@gmail.com
[ Added missing stdlib.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf lzma: Close lzma stream on exit

[ Upstream commit f8cbb0f926ae1e1fb5f9e51614e5437560ed4039 ]

ASan reports memory leaks when running:

  # perf test "88: Check open filename arg using perf trace + vfs_getname"

One of these is caused by the lzma stream never being closed inside
lzma_decompress_to_file().

This patch adds the missing lzma_end().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 80a32e5b498a7547 ("perf tools: Add lzma decompression support for kernel module")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Check if num of q_vectors is smaller than max before array access

[ Upstream commit 6c19d772618fea40d9681f259368f284a330fd90 ]

Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.

Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Reviewed-by: Mateusz Palczewski <mateusz.placzewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix an error handling path in 'iavf_probe()'

[ Upstream commit af30cbd2f4d6d66a9b6094e0aa32420bc8b20e08 ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: Fix an error handling path in 'e1000_probe()'

[ Upstream commit 4589075608420bc49fcef6e98279324bf2bb91ae ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 111b9dc5c981 ("e1000e: add aer support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fm10k: Fix an error handling path in 'fm10k_probe()'

[ Upstream commit e85e14d68f517ef12a5fb8123fff65526b35b6cd ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 19ae1b3fb99c ("fm10k: Add support for PCI power management and error handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Fix an error handling path in 'igb_probe()'

[ Upstream commit fea03b1cebd653cd095f2e9a58cfe1c85661c363 ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 40a914fa72ab ("igb: Add support for pci-e Advanced Error Reporting")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Fix an error handling path in 'ixgbe_probe()'

[ Upstream commit dd2aefcd5e37989ae5f90afdae44bbbf3a2990da ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 6fabd715e6d8 ("ixgbe: Implement PCIe AER support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: tcp: drop silly ICMPv6 packet too big messages

commit c7bb4b89033b764eb07db4e060548a6311d801ee upstream.

While TCP stack scales reasonably well, there is still one part that
can be used to DDOS it.

IPv6 Packet too big messages have to lookup/insert a new route,
and if abused by attackers, can easily put hosts under high stress,
with many cpus contending on a spinlock while one is stuck in fib6_run_gc()

ip6_protocol_deliver_rcu()
 icmpv6_rcv()
  icmpv6_notify()
   tcp_v6_err()
    tcp_v6_mtu_reduced()
     inet6_csk_update_pmtu()
      ip6_rt_update_pmtu()
       __ip6_rt_update_pmtu()
        ip6_rt_cache_alloc()
         ip6_dst_alloc()
          dst_alloc()
           ip6_dst_gc()
            fib6_run_gc()
             spin_lock_bh() ...

Some of our servers have been hit by malicious ICMPv6 packets
trying to _increase_ the MTU/MSS of TCP flows.

We believe these ICMPv6 packets are a result of a bug in one ISP stack,
since they were blindly sent back for _every_ (small) packet sent to them.

These packets are for one TCP flow:
09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240

TCP stack can filter some silly requests :

1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err()
2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS.

This tests happen before the IPv6 routing stack is entered, thus
removing the potential contention and route exhaustion.

Note that IPv6 stack was performing these checks, but too late
(ie : after the route has been added, and after the potential
garbage collect war)

v2: fix typo caught by Martin, thanks !
v3: exports tcp_mtu_to_mss(), caught by David, thanks !

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: annotate data races around tp->mtu_info

commit 561022acb1ce62e50f7a8258687a21b84282a4cb upstream.

While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.

Fixes: 563d34d05786 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: validate lwtstate->data before returning from skb_tunnel_info()

commit 67a9c94317402b826fc3db32afc8f39336803d97 upstream.

skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info
type without validation. lwtstate->data can have various types such as
mpls_iptunnel_encap, etc and these are not compatible.
So skb_tunnel_info() should validate before returning that pointer.

Splat looks like:
BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan]
Read of size 2 at addr ffff888106ec2698 by task ping/811

CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195
Call Trace:
 dump_stack_lvl+0x56/0x7b
 print_address_description.constprop.8.cold.13+0x13/0x2ee
 ? vxlan_get_route+0x418/0x4b0 [vxlan]
 ? vxlan_get_route+0x418/0x4b0 [vxlan]
 kasan_report.cold.14+0x83/0xdf
 ? vxlan_get_route+0x418/0x4b0 [vxlan]
 vxlan_get_route+0x418/0x4b0 [vxlan]
 [ ... ]
 vxlan_xmit_one+0x148b/0x32b0 [vxlan]
 [ ... ]
 vxlan_xmit+0x25c5/0x4780 [vxlan]
 [ ... ]
 dev_hard_start_xmit+0x1ae/0x6e0
 __dev_queue_xmit+0x1f39/0x31a0
 [ ... ]
 neigh_xmit+0x2f9/0x940
 mpls_xmit+0x911/0x1600 [mpls_iptunnel]
 lwtunnel_xmit+0x18f/0x450
 ip_finish_output2+0x867/0x2040
 [ ... ]

Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ti: fix UAF in tlan_remove_one

commit 0336f8ffece62f882ab3012820965a786a983f70 upstream.

priv is netdev private data and it cannot be
used after free_netdev() call. Using priv after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.

Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qcom/emac: fix UAF in emac_remove

commit ad297cd2db8953e2202970e9504cab247b6c7cb4 upstream.

adpt is netdev private data and it cannot be
used after free_netdev() call. Using adpt after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.

Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: moxa: fix UAF in moxart_mac_probe

commit c78eaeebe855fd93f2e77142ffd0404a54070d84 upstream.

In case of netdev registration failure the code path will
jump to init_fail label:

init_fail:
netdev_err(ndev, "init failed\n");
moxart_mac_free_memory(ndev);
irq_map_fail:
free_netdev(ndev);
return ret;

So, there is no need to call free_netdev() before jumping
to error handling path, since it can cause UAF or double-free
bug.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: Ensure all TX/RX queues DMAs are disabled

commit 2b452550a203d88112eaf0ba9fc4b750a000b496 upstream.

Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.

Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: sync fdb to new unicast-filtering ports

commit a019abd8022061b917da767cd1a66ed823724eab upstream.

Since commit 2796d0c648c9 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.

Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.

Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.

Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: fix return value of ip6_skb_dst_mtu

commit 40fc3054b45820c28ea3c65e2c86d041dc244a8a upstream.

Commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.

Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fix CFS bandwidth hrtimer expiry type

[ Upstream commit 72d0ad7cb5bad265adb2014dbe46c4ccb11afaba ]

The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.

This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.

Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8

[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]

The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.

[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]

Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: max77686: Do not enforce (incorrect) interrupt trigger type

[ Upstream commit 742b0d7e15c333303daad4856de0764f4bc83601 ]

Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.

The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.

The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races.  With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set

[ Upstream commit a979522a1a88556e42a22ce61bccc58e304cb361 ]

To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.

If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.

Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.

[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html

Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/core: Correct function name thermal_zone_device_unregister()

[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ]

Fix the following make W=1 kernel build warning:

  drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: juno: Update SCPI nodes as per the YAML schema

[ Upstream commit 70010556b158a0fefe43415fb0c58347dcce7da0 ]

The SCPI YAML schema expects standard node names for clocks and
power domain controllers. Fix those as per the schema for Juno
platforms.

Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: fix RCC node name on stm32f429 MCU

[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ]

This prevent warning observed with "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format
error, expected "40023800"

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info

[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ]

The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c,
is imx5_cpu_suspend_info.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6: phyFLEX: Fix UART hardware flow control

[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ]

Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.

Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM63xx: Fix NAND nodes names

[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: brcmstb: dts: fix NAND nodes names

[ Upstream commit 9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: ti-syscon: fix to_ti_syscon_reset_data macro

[ Upstream commit 05cf8fffcdeb47aef1203c08cbec5224fd3a0e1c ]

The to_ti_syscon_reset_data macro currently only works if the
parameter passed into it is called 'rcdev'.

Fixes a checkpatch --strict issue:

  CHECK: Macro argument reuse 'rcdev' - possible side-effects?
  #53: FILE: drivers/reset/reset-ti-syscon.c:53:
  +#define to_ti_syscon_reset_data(rcdev) \
  + container_of(rcdev, struct ti_syscon_reset_data, rcdev)

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: Fix power-controller node names for rk3288

[ Upstream commit 970cdc53cb1afa73602028c103dbfb6a230080be ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288

[ Upstream commit dfbfb86a43f9a5bbd166d88bca9e07ee4e1bff31 ]

A test with the command below aimed at powerpc generates
notifications in the Rockchip ARM tree.

Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3036-kylin and rk3288

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.276

Link: https://lore.kernel.org/r/20210719144940.288257948@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seq_file: disallow extremely large seq buffer allocations

commit 8cae8cd89f05f6de223d63e6d15e31c8ba9cf53b upstream.

There is no reasonable need for a buffer larger than this, and it avoids
int overflow pitfalls.

Fixes: 058504edd026 ("fs/seq_file: fallback to vmalloc allocation")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: vdso: Invalid GIC access through VDSO

[ Upstream commit 47ce8527fbba145a7723685bc9a27d9855e06491 ]

Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:

  void *get_gic(const struct vdso_data *data) {
    return (void __iomem *)data - PAGE_SIZE;
  }

However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:

  +--------------------+
  |                    |
  | vd[CS_RAW]         | ---+
  | vd[CS_HRES_COARSE] |    |
  +--------------------+    | -PAGE_SIZE
  |                    |    |
  |  GIC mapped page   | <--+
  |                    |
  +--------------------+

When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.

Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: disable branch profiling in boot/decompress.o

[ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ]

Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.

mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow

Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: always link byteswap helpers into decompressor

[ Upstream commit cddc40f5617e53f97ef019d5b29c1bd6cbb031ec ]

My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:

   mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
   decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'

It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4.  From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.

While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.

Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()

[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ]

If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.

Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a09d1 ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema

[ Upstream commit 414bfe1d26b60ef20b58e36efd5363188a694bab ]

ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.

Fixes: 444d66fafab8 ("ARM: dts: add spi wifi support to cm-t335")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: fsl_ifc: fix leak of private memory on probe failure

[ Upstream commit 8e0d09b1232d0538066c40ed4c13086faccbdff6 ]

On probe error the driver should free the memory allocated for private
structure.  Fix this by using resource-managed allocation.

Fixes: a20cbdeffce2 ("powerpc/fsl: Add support for Integrated Flash Controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210527154322.81253-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: fsl_ifc: fix leak of IO mapping on probe failure

[ Upstream commit 3b132ab67fc7a358fff35e808fa65d4bea452521 ]

On probe error the driver should unmap the IO memory.  Smatch reports:

  drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298.

Fixes: a20cbdeffce2 ("powerpc/fsl: Add support for Integrated Flash Controller")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210527154322.81253-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: bail if try_module_get() fails

[ Upstream commit 4fb26fb83f0def3d39c14e268bcd4003aae8fade ]

Abort instead of returning a new reset control for a reset controller
device that is going to have its module unloaded.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 61fc41317666 ("reset: Add reset controller API")
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210607082615.15160-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: r8a7779, marzen: Fix DU clock names

[ Upstream commit 6ab8c23096a29b69044209a5925758a6f88bd450 ]

"make dtbs_check" complains:

    arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected

Change the first clock name to match the DT bindings.
This has no effect on actual operation, as the Display Unit driver in
Linux does not use the first clock name on R-Car H1, but just grabs the
first clock.

Fixes: 665d79aa47cb3983 ("ARM: shmobile: marzen: Add DU external pixel clock to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: fix snprintf() checking in is_rtc_hctosys()

[ Upstream commit 54b909436ede47e0ee07f1765da27ec2efa41e84 ]

The scnprintf() function silently truncates the printf() and returns
the number bytes that it was able to copy (not counting the NUL
terminator).  Thus, the highest value it can return here is
"NAME_SIZE - 1" and the overflow check is dead code.  Fix this by
using the snprintf() function which returns the number of bytes that
would have been copied if there was enough space and changing the
condition from "> NAME_SIZE" to ">= NAME_SIZE".

Fixes: 92589c986b33 ("rtc-proc: permit the /proc/driver/rtc device to use other devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4

[ Upstream commit fd2f1717966535b7d0b6fe45cf0d79e94330da5f ]

There is no "max_brightness" property as pointed out by dtschema:

  arch/arm/boot/dts/exynos5422-odroidxu4.dt.yaml: led-controller: led-1: 'max-brightness' is a required property

Fixes: 6658356014cb ("ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210505135941.59898-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3

[ Upstream commit 75121e1dc9fe4def41e63d57f6a53749b88006ed ]

There is no "max_brightness" property.  This brings the intentional
brightness reduce of green LED and dtschema checks as well:

  arch/arm/boot/dts/exynos5410-odroidxu.dt.yaml: led-controller-1: led-1: 'max-brightness' is a required property

Fixes: 719f39fec586 ("ARM: dts: exynos5422-odroidxu3: Hook up PWM and use it for LEDs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210505135941.59898-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

hexagon: use common DISCARDS macro

[ Upstream commit 681ba73c72302214686401e707e2087ed11a6556 ]

ld.lld warns that the '.modinfo' section is not currently handled:

ld.lld: warning: kernel/built-in.a(workqueue.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(printk/printk.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(irq/spurious.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(rcu/update.o):(.modinfo) is being placed in '.modinfo'

The '.modinfo' section was added in commit 898490c010b5 ("moduleparam:
Save information about built-in modules in separate file") to the DISCARDS
macro but Hexagon has never used that macro.  The unification of DISCARDS
happened in commit 023bf6f1b8bf ("linker script: unify usage of discard
definition") in 2009, prior to Hexagon being added in 2011.

Switch Hexagon over to the DISCARDS macro so that anything that is
expected to be discarded gets discarded.

Link: https://lkml.kernel.org/r/20210521011239.1332345-3-nathan@kernel.org
Fixes: e95bf452a9e2 ("Hexagon: Add configuration and makefiles for the Hexagon architecture.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: isa: Fix error return code in snd_cmi8330_probe()

[ Upstream commit 31028cbed26a8afa25533a10425ffa2ab794c76c ]

When 'SB_HW_16' check fails, the error code -ENODEV instead of 0 should be
returned, which is the same as that returned when 'WSS_HW_CMI8330' check
fails.

Fixes: 43bcd973d6d0 ("[ALSA] Add snd_card_set_generic_dev() call to ISA drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210707074051.2663-1-thunder.leizhen@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/fpu: Limit xstate copy size in xstateregs_set()

[ Upstream commit 07d6688b22e09be465652cf2da0da6bf86154df6 ]

If the count argument is larger than the xstate size, this will happily
copy beyond the end of xstate.

Fixes: 91c3dba7dbc1 ("x86/fpu/xstate: Fix PTRACE frames for XSAVES")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.120741557@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode

[ Upstream commit a801fcfeef96702fa3f9b22ad56c5eb1989d9221 ]

xfstests-generic/476 reports a warning message as below:

WARNING: CPU: 2 PID: 30347 at fs/inode.c:361 inc_nlink+0x52/0x70
Call Trace:
  do_rename+0x502/0xd40 [ubifs]
  ubifs_rename+0x8b/0x180 [ubifs]
  vfs_rename+0x476/0x1080
  do_renameat2+0x67c/0x7b0
  __x64_sys_renameat2+0x6e/0x90
  do_syscall_64+0x66/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Following race case can cause this:
         rename_whiteout(Thread 1)             wb_workfn(Thread 2)
ubifs_rename
  do_rename
                                          __writeback_single_inode
    spin_lock(&inode->i_lock)
    whiteout->i_state |= I_LINKABLE
                                            inode->i_state &= ~dirty;
---- How race happens on i_state:
    (tmp = whiteout->i_state | I_LINKABLE)
                           (tmp = inode->i_state & ~dirty)
    (whiteout->i_state = tmp)
                           (inode->i_state = tmp)
----
    spin_unlock(&inode->i_lock)
    inc_nlink(whiteout)
    WARN_ON(!(inode->i_state & I_LINKABLE)) !!!

Fix to add i_lock to avoid i_state update race condition.

Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: fix acl memory leak of posix_acl_create()

[ Upstream commit 1fcb6fcd74a222d9ead54d405842fc763bb86262 ]

When looking into another nfs xfstests report, I found acl and
default_acl in nfs3_proc_create() and nfs3_proc_mknod() error
paths are possibly leaked. Fix them in advance.

Fixes: 013cdf1088d7 ("nfs: use generic posix ACL infrastructure for v3 Posix ACLs")
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: aspeed: fix hardware timeout calculation

[ Upstream commit e7dc481c92060f9ce872878b0b7a08c24713a7e5 ]

Fix hardware timeout calculation in aspeed_wdt_set_timeout function to
ensure the reload value does not exceed the hardware limit.

Fixes: efa859f7d786 ("watchdog: Add Aspeed watchdog driver")
Reported-by: Amithash Prasad <amithash@fb.com>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210417034249.5978-1-rentao.bupt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: fix error return code in winch_tramp()

[ Upstream commit ccf1236ecac476d9d2704866d9a476c86e387971 ]

Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Fixes: 89df6bfc0405 ("uml: DEBUG_SHIRQ fixes")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-By: anton.ivanov@cambridgegreys.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: fix error return code in slip_open()

[ Upstream commit b77e81fbe5f5fb4ad9a61ec80f6d1e30b6da093a ]

Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Fixes: a3c77c67a443 ("[PATCH] uml: slirp and slip driver cleanups and fixes")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-By: anton.ivanov@cambridgegreys.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: rt5033_battery: Fix device tree enumeration

[ Upstream commit f3076cd8d1d5fa64b5e1fa5affc045c2fc123baa ]

The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt
line. Therefore, it is not actually part of the RT5033 MFD and needs
its own of_match_table to probe properly.

Also, given that it's independent of the MFD, there is actually
no need to make the Kconfig depend on MFD_RT5033. Although the driver
uses the shared <linux/mfd/rt5033.h> header, there is no compile
or runtime dependency on the RT5033 MFD driver.

Cc: Beomho Seo <beomho.seo@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun

[ Upstream commit bdcdaa13ad96f1a530711c29e6d4b8311eff767c ]

"utf16s_to_utf8s(..., buf, PAGE_SIZE)" puts up to PAGE_SIZE bytes into
"buf" and returns the number of bytes it actually put there.  If it wrote
PAGE_SIZE bytes, the newline added by dsm_label_utf16s_to_utf8s() would
overrun "buf".

Reduce the size available for utf16s_to_utf8s() to use so there is always
space for the newline.

[bhelgaas: reorder patch in series, commit log]
Fixes: 6058989bad05 ("PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs")
Link: https://lore.kernel.org/r/20210603000112.703037-7-kw@linux.com
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_console: Assure used length from device is limited

[ Upstream commit d00d8da5869a2608e97cfede094dfc5e11462a46 ]

The buf->len might come from an untrusted device. This
ensures the value would not exceed the size of the buffer
to avoid data corruption or loss.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210525125622.1203-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-blk: Fix memory leak among suspend/resume procedure

[ Upstream commit b71ba22e7c6c6b279c66f53ee7818709774efa1f ]

The vblk->vqs should be freed before we call init_vqs()
in virtblk_restore().

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210517084332.280-1-xieyongji@bytedance.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: AMBA: Fix resource name in /proc/iomem

[ Upstream commit 7718629432676b5ebd9a32940782fe297a0abf8d ]

In function amba_handler_attach(), dev->res.name is initialized by
amba_device_alloc. But when address_found is false, dev->res.name is
assigned to null value, which leads to wrong resource name display in
/proc/iomem, "<BAD>" is seen for those resources.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: tegra: Don't modify HW state in .remove callback

[ Upstream commit 86f7fa71cd830d18d7ebcaf719dffd5ddfe1acdd ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

So drop the hardware modification from the .remove() callback.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: ab8500: add missing MODULE_DEVICE_TABLE

[ Upstream commit dfe52db13ab8d24857a9840ec7ca75eef800c26c ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: charger-manager: add missing MODULE_DEVICE_TABLE

[ Upstream commit 073b5d5b1f9cc94a3eea25279fbafee3f4f5f097 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty

[ Upstream commit 22d41cdcd3cfd467a4af074165357fcbea1c37f5 ]

The checks for page->mapping are odd, as set_page_dirty is an
address_space operation, and I don't see where it would be called on a
non-pagecache page.

The warning about the page lock also seems bogus.  The comment over
set_page_dirty() says that it can be called without the page lock in
some rare cases. I don't think we want to warn if that's the case.

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

orangefs: fix orangefs df output.

[ Upstream commit 0fdec1b3c9fbb5e856a40db5993c9eaf91c74a83 ]

Orangefs df output is whacky. Walt Ligon suggested this might fix it.
It seems way more in line with reality now...

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/fpu: Return proper error codes from user access functions

[ Upstream commit aee8c67a4faa40a8df4e79316dbfc92d123989c1 ]

When *RSTOR from user memory raises an exception, there is no way to
differentiate them. That's bad because it forces the slow path even when
the failure was not a fault. If the operation raised eg. #GP then going
through the slow path is pointless.

Use _ASM_EXTABLE_FAULT() which stores the trap number and let the exception
fixup return the negated trap number as error.

This allows to separate the fast path and let it handle faults directly and
avoid the slow path for all other exceptions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121457.601480369@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: Fix possible use-after-free by calling del_timer_sync()

[ Upstream commit d0212f095ab56672f6f36aabc605bda205e1e0bf ]

This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/1620802676-19701-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()

[ Upstream commit 90b7c141132244e8e49a34a4c1e445cce33e07f4 ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1620716691-108460-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: Fix possible use-after-free in wdt_startup()

[ Upstream commit c08a6b31e4917034f0ed0cb457c3bb209576f542 ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1620716495-108352-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1

[ Upstream commit 8b95a7d90ce8160ac5cffd5bace6e2eba01a871e ]

There's a few instructions that GAS infers operands but Clang doesn't;
from what I can tell the Arm ARM doesn't say these are optional.

F5.1.257 TBB, TBH T1 Halfword variant
F5.1.238 STREXD T1 variant
F5.1.84 LDREXD T1 variant

Link: https://github.com/ClangBuiltLinux/linux/issues/1309
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jian Cai <jiancai@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE

[ Upstream commit ed3443fb4df4e140a22f65144546c8a8e1e27f4e ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: ab8500: Avoid NULL pointers

[ Upstream commit 5bcb5087c9dd3dca1ff0ebd8002c5313c9332b56 ]

Sometimes the code will crash because we haven't enabled
AC or USB charging and thus not created the corresponding
psy device. Fix it by checking that it is there before
notifying.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: spear: Don't modify HW state in .remove callback

[ Upstream commit b601a18f12383001e7a8da238de7ca1559ebc450 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

So drop the hardware modification from the .remove() callback.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/decompress_unlz4.c: correctly handle zero-padding around initrds.

[ Upstream commit 2c484419efc09e7234c667aa72698cb79ba8d8ed ]

lz4 compatible decompressor is simple.  The format is underspecified and
relies on EOF notification to determine when to stop.  Initramfs buffer
format[1] explicitly states that it can have arbitrary number of zero
padding.  Thus when operating without a fill function, be extra careful to
ensure that sizes less than 4, or apperantly empty chunksizes are treated
as EOF.

To test this I have created two cpio initrds, first a normal one,
main.cpio.  And second one with just a single /test-file with content
"second" second.cpio.  Then i compressed both of them with gzip, and with
lz4 -l.  Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1
count=4).  To create four testcase initrds:

 1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
 2) main.cpio.lz4  + extra.cpio.lz4 = pad0.lz4
 3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
 4) main.cpio.lz4  + pad4 + extra.cpio.lz4 = pad4.lz4

The pad4 test-cases replicate the initrd load by grub, as it pads and
aligns every initrd it loads.

All of the above boot, however /test-file was not accessible in the initrd
for the testcase #4, as decoding in lz4 decompressor failed.  Also an
error message printed which usually is harmless.

Whith a patched kernel, all of the above testcases now pass, and
/test-file is accessible.

This fixes lz4 initrd decompress warning on every boot with grub.  And
more importantly this fixes inability to load multiple lz4 compressed
initrds with grub.  This patch has been shipping in Ubuntu kernels since
January 2021.

[1] ./Documentation/driver-api/early-userspace/buffer-format.rst

BugLink: https://bugs.launchpad.net/bugs/1835660
Link: https://lore.kernel.org/lkml/20210114200256.196589-1-xnox@ubuntu.com/
Link: https://lkml.kernel.org/r/20210513104831.432975-1-dimitri.ledkov@canonical.com
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Rajat Asthana <thisisrast7@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: core: Disable client irq on reboot/shutdown

[ Upstream commit b64210f2f7c11c757432ba3701d88241b2b98fb1 ]

If an i2c client receives an interrupt during reboot or shutdown it may
be too late to service it by making an i2c transaction on the bus
because the i2c controller has already been shutdown. This can lead to
system hangs if the i2c controller tries to make a transfer that is
doomed to fail because the access to the i2c pins is already shut down,
or an iommu translation has been torn down so i2c controller register
access doesn't work.

Let's simply disable the irq if there isn't a shutdown callback for an
i2c client when there is an irq associated with the device. This will
make sure that irqs don't come in later than the time that we can handle
it. We don't do this if the i2c client device already has a shutdown
callback because presumably they're doing the right thing and quieting
the device so irqs don't come in after the shutdown callback returns.

Reported-by: kernel test robot <lkp@intel.com>
[swboyd@chromium.org: Dropped newline, added commit text, added
interrupt.h for robot build error]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Add IRQ check for platform_get_irq()

[ Upstream commit 8c13212443230d03ff25014514ec0d53498c0912 ]

The function hda_tegra_first_init() neglects to check the return
value after executing platform_get_irq().

hda_tegra_first_init() should check the return value (if negative
error number) for errors so as to not pass a negative value to
the devm_request_irq().

Fix it by adding a check for the return value irq_id.

Signed-off-by: Jiajun Cao <jjcao20@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210622131947.94346-1-jjcao20@fudan.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

backlight: lm3630a: Fix return code of .update_status() callback

[ Upstream commit b9481a667a90ec739995e85f91f3672ca44d6ffa ]

According to <linux/backlight.h> .update_status() is supposed to
return 0 on success and a negative error code otherwise. Adapt
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to
actually do it.

While touching that also add the error code to the failure message.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/boot: Fixup device-tree on little endian

[ Upstream commit c93f80849bdd9b45d834053ae1336e28f0026c84 ]

This fixes the core devtree.c functions and the ns16550 UART backend.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YMwXrPT8nc4YUdJ9@thinks.paulus.ozlabs.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: hid: fix error return code in hid_bind()

[ Upstream commit 88693f770bb09c196b1eb5f06a484a254ecb9924 ]

Fix to return a negative error code from the error handling
case instead of 0.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210618043835.2641360-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_hid: fix endianness issue with descriptors

[ Upstream commit 33cb46c4676d01956811b68a29157ea969a5df70 ]

Running sparse checker it shows warning message about
incorrect endianness used for descriptor initialization:

| f_hid.c:91:43: warning: incorrect type in initializer (different base types)
| f_hid.c:91:43:    expected restricted __le16 [usertype] bcdHID
| f_hid.c:91:43:    got int

Fixing issue with cpu_to_le16() macro, however this is not a real issue
as the value is the same both endians.

Cc: Fabien Chouteau <fabien.chouteau@barco.com>
Cc: Segiy Stetsyuk <serg_stetsuk@ukr.net>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/20210617162755.29676-1-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>