GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
16 years agoext4: Rename ext4dev to ext4
Theodore Ts'o [Sat, 11 Oct 2008 00:02:48 +0000 (20:02 -0400)]
ext4: Rename ext4dev to ext4

The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix.  Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Avoid double dirtying of super block in ext4_put_super()
Andi Kleen [Tue, 7 Oct 2008 01:37:44 +0000 (21:37 -0400)]
ext4: Avoid double dirtying of super block in ext4_put_super()

While reading code I noticed that ext4_put_super() dirties the
superblock bh twice. It is always done in ext4_commit_super()
too. Remove the redundant dirty operation.
Should be a nop semantically.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
16 years agoUpdate ext4 MAINTAINERS file
Theodore Ts'o [Tue, 7 Oct 2008 00:58:09 +0000 (20:58 -0400)]
Update ext4 MAINTAINERS file

The ext4 entry was copied from ext3 and was never correct.  Update it
so that Theodore Ts'o is listed as the maintainer, and point the
website to http://ext4.wiki.kernel.org.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoHook ext4 to the vfs fiemap interface.
Eric Sandeen [Tue, 7 Oct 2008 04:46:36 +0000 (00:46 -0400)]
Hook ext4 to the vfs fiemap interface.

ext4_ext_walk_space() was reinstated to be used for iterating over file
extents with a callback; it is used by the ext4 fiemap implementation.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
16 years agogeneric block based fiemap implementation
Josef Bacik [Fri, 3 Oct 2008 21:32:43 +0000 (17:32 -0400)]
generic block based fiemap implementation

Any block based fs (this patch includes ext3) just has to declare its own
fiemap() function and then call this generic function with its own
get_block_t. This works well for block based filesystems that will map
multiple contiguous blocks at one time, but will work for filesystems that
only map one block at a time, you will just end up with an "extent" for each
block. One gotcha is this will not play nicely where there is hole+data
after the EOF. This function will assume its hit the end of the data as soon
as it hits a hole after the EOF, so if there is any data past that it will
not pick that up. AFAIK no block based fs does this anyway, but its in the
comments of the function anyway just in case.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
16 years agoocfs2: fiemap support
Mark Fasheh [Fri, 3 Oct 2008 21:32:11 +0000 (17:32 -0400)]
ocfs2: fiemap support

Plug ocfs2 into ->fiemap. Some portions of ocfs2_get_clusters() had to be
refactored so that the extent cache can be skipped in favor of going
directly to the on-disk records. This makes it easier for us to determine
which extent is the last one in the btree. Also, I'm not sure we want to be
caching fiemap lookups anyway as they're not directly related to data
read/write.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: ocfs2-devel@oss.oracle.com
Cc: linux-fsdevel@vger.kernel.org
16 years agovfs: vfs-level fiemap interface
Mark Fasheh [Wed, 8 Oct 2008 23:44:18 +0000 (19:44 -0400)]
vfs: vfs-level fiemap interface

Basic vfs-level fiemap infrastructure, which sets up a new ->fiemap
inode operation.

Userspace can get extent information on a file via fiemap ioctl. As input,
the fiemap ioctl takes a struct fiemap which includes an array of struct
fiemap_extent (fm_extents). Size of the extent array is passed as
fm_extent_count and number of extents returned will be written into
fm_mapped_extents. Offset and length fields on the fiemap structure
(fm_start, fm_length) describe a logical range which will be searched for
extents. All extents returned will at least partially contain this range.
The actual extent offsets and ranges returned will be unmodified from their
offset and range on-disk.

The fiemap ioctl returns '0' on success. On error, -1 is returned and errno
is set. If errno is equal to EBADR, then fm_flags will contain those flags
which were passed in which the kernel did not understand. On all other
errors, the contents of fm_extents is undefined.

As fiemap evolved, there have been many authors of the vfs patch. As far as
I can tell, the list includes:
Kalpak Shah <kalpak.shah@sun.com>
Andreas Dilger <adilger@sun.com>
Eric Sandeen <sandeen@redhat.com>
Mark Fasheh <mfasheh@suse.com>

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: linux-api@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
16 years agoext4: fix xattr deadlock
Kalpak Shah [Thu, 9 Oct 2008 03:21:54 +0000 (23:21 -0400)]
ext4: fix xattr deadlock

ext4_xattr_set_handle() eventually ends up calling
ext4_mark_inode_dirty() which tries to expand the inode by shifting
the EAs.  This leads to the xattr_sem being downed again and leading
to a deadlock.

This patch makes sure that if ext4_xattr_set_handle() is in the
call-chain, ext4_mark_inode_dirty() will not expand the inode.

Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agojbd2: Fix buffer head leak when writing the commit block
Theodore Ts'o [Mon, 6 Oct 2008 16:04:02 +0000 (12:04 -0400)]
jbd2: Fix buffer head leak when writing the commit block

Also make sure the buffer heads are marked clean before submitting bh
for writing.  The previous code was marking the buffer head dirty,
which would have forced an unneeded write (and seek) to the journal
for no good reason.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Add debugging markers that can be used by systemtap
Theodore Ts'o [Mon, 6 Oct 2008 00:50:06 +0000 (20:50 -0400)]
ext4: Add debugging markers that can be used by systemtap

This debugging markers are designed to debug problems such as the
random filesystem latency problems reported by Arjan.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agojbd2: abort instead of waiting for nonexistent transaction
Duane Griffin [Thu, 9 Oct 2008 03:28:31 +0000 (23:28 -0400)]
jbd2: abort instead of waiting for nonexistent transaction

The __jbd2_log_wait_for_space function sits in a loop checkpointing
transactions until there is sufficient space free in the journal.
However, if there are no transactions to be processed (e.g.  because the
free space calculation is wrong due to a corrupted filesystem) it will
never progress.

Check for space being required when no transactions are outstanding and
abort the journal instead of endlessly looping.

This patch fixes the bug reported by Sami Liedes at:
http://bugzilla.kernel.org/show_bug.cgi?id=10976

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: Sami Liedes <sliedes@cc.hut.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: fix initialization of UNINIT bitmap blocks
Frederic Bohe [Fri, 10 Oct 2008 12:09:18 +0000 (08:09 -0400)]
ext4: fix initialization of UNINIT bitmap blocks

This fixes a bug which caused on-line resizing of filesystems with a
1k blocksize to fail.  The root cause of this bug was the fact that if
an uninitalized bitmap block gets read in by userspace (which
e2fsprogs does try to avoid, but can happen when the blocksize is less
than the pagesize and an adjacent blocks is read into memory)
ext4_read_block_bitmap() was erroneously depending on the buffer
uptodate flag to decide whether it needed to initialize the bitmap
block in memory --- i.e., to set the standard set of blocks in use by
a block group (superblock, bitmaps, inode table, etc.).  Essentially,
ext4_read_block_bitmap() assumed it was the only routine that might
try to read a block containing a block bitmap, which is simply not
true.

To fix this, ext4_read_block_bitmap() and ext4_read_inode_bitmap()
must always initialize uninitialized bitmap blocks.  Once a block or
inode is allocated out of that bitmap, it will be marked as
initialized in the block group descriptor, so in general this won't
result any extra unnecessary work.

Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Remove old legacy block allocator
Theodore Ts'o [Fri, 10 Oct 2008 13:40:52 +0000 (09:40 -0400)]
ext4: Remove old legacy block allocator

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Use readahead when reading an inode from the inode table
Theodore Ts'o [Fri, 10 Oct 2008 03:53:47 +0000 (23:53 -0400)]
ext4: Use readahead when reading an inode from the inode table

With modern hard drives, reading 64k takes roughly the same time as
reading a 4k block.  So request readahead for adjacent inode table
blocks to reduce the time it takes when iterating over directories
(especially when doing this in htree sort order) in a cold cache case.
With this patch, the time it takes to run "git status" on a kernel
tree after flushing the caches via "echo 3 > /proc/sys/vm/drop_caches"
is reduced by 21%.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Improve the documentation for ext4's /proc tunables
Theodore Ts'o [Fri, 10 Oct 2008 03:21:54 +0000 (23:21 -0400)]
ext4: Improve the documentation for ext4's /proc tunables

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alex Tomas <bzzz@sun.com>
Cc: Andreas Dilger <adilger@sun.com>
16 years agoext4: Combine proc file handling into a single set of functions
Theodore Ts'o [Tue, 23 Sep 2008 22:07:35 +0000 (18:07 -0400)]
ext4: Combine proc file handling into a single set of functions

Previously mballoc created a separate set of functions for each proc
file.  This combines the tunables into a single set of functions which
gets used for all of the per-superblock proc files, saving
approximately 2k of compiled object code.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: move /proc setup and teardown out of mballoc.c
Theodore Ts'o [Tue, 23 Sep 2008 13:18:24 +0000 (09:18 -0400)]
ext4: move /proc setup and teardown out of mballoc.c

...and into the core setup/teardown code in fs/ext4/super.c so that
other parts of ext4 can define tuning parameters.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Don't use 'struct dentry' for internal lookups
Theodore Ts'o [Mon, 22 Sep 2008 19:21:01 +0000 (15:21 -0400)]
ext4: Don't use 'struct dentry' for internal lookups

This is a port of a patch from Linus which fixes a 200+ byte stack
usage problem in ext4_get_parent().

It's more efficient to pass down only the actual parts of the dentry
that matter: the parent inode and the name, instead of allocating a
struct dentry on the stack.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4/jbd2: Avoid WARN() messages when failing to write to the superblock
Theodore Ts'o [Tue, 7 Oct 2008 01:35:40 +0000 (21:35 -0400)]
ext4/jbd2: Avoid WARN() messages when failing to write to the superblock

This fixes some very common warnings reported by kerneloops.org

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: use percpu data structures for lg_prealloc_list
Eric Sandeen [Sat, 13 Sep 2008 19:23:29 +0000 (15:23 -0400)]
ext4: use percpu data structures for lg_prealloc_list

lg_prealloc_list seems to cry out for a per-cpu data structure; on a large
smp system I think this should be better.  I've lightly tested this change
on a 4-cpu system.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Renumber EXT4_IOC_MIGRATE
Theodore Ts'o [Sat, 13 Sep 2008 23:54:35 +0000 (19:54 -0400)]
ext4: Renumber EXT4_IOC_MIGRATE

Pick an ioctl number for EXT4_IOC_MIGRATE that won't conflict with
other ext4 ioctl's.  Since there haven't been any major userspace
users of this ioctl, we can afford to change this now, to avoid
potential problems later.

Also, reorder the ioctl numbers in ext4.h to avoid this sort of
mistake in the future.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: hook the ext3 migration interface to the EXT4_IOC_SETFLAGS ioctl
Aneesh Kumar K.V [Thu, 9 Oct 2008 03:34:06 +0000 (23:34 -0400)]
ext4: hook the ext3 migration interface to the EXT4_IOC_SETFLAGS ioctl

This patch hooks the ext3 to ext4 migrate interface to
EXT4_IOC_SETFLAGS ioctl. The userspace interface is via chattr +e.  We
only allow setting extent flags.  Clearing extent flag (migrating from
ext4 to ext3) is not supported.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: elevate write count for migrate ioctl
Aneesh Kumar K.V [Sat, 13 Sep 2008 16:52:26 +0000 (12:52 -0400)]
ext4: elevate write count for migrate ioctl

The migrate ioctl writes to the filsystem, so we need to elevate the
write count.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: add missing unlock in ext4_check_descriptors() on error path
Li Zefan [Mon, 8 Sep 2008 14:47:19 +0000 (10:47 -0400)]
ext4: add missing unlock in ext4_check_descriptors() on error path

If there group descriptors are corrupted we need unlock the block
group lock before returning from the function; else we will oops when
freeing a spinlock which is still being held.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agojbd2: clean up how the journal device name is printed
Theodore Ts'o [Tue, 16 Sep 2008 18:36:17 +0000 (14:36 -0400)]
jbd2: clean up how the journal device name is printed

Calculate the journal device name once and stash it away in the
journal_s structure.  This avoids needing to call bdevname()
everywhere and reduces stack usage by not needing to allocate an
on-stack buffer.  In addition, we eliminate the '/' that can appear in
device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that
can cause problems when creating proc directory names, and include the
inode number to support ocfs2 which creates multiple journals with
different inode numbers.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: fix #11321: create /proc/ext4/*/stats more carefully
Alexey Dobriyan [Sun, 14 Sep 2008 14:21:33 +0000 (10:21 -0400)]
ext4: fix #11321: create /proc/ext4/*/stats more carefully

ext4 creates per-suberblock directory in /proc/ext4/ . Name used as
basis is taken from bdevname, which, surprise, can contain slash.

However, proc while allowing to use proc_create("a/b", parent) form of
PDE creation, assumes that parent/a was already created.

bdevname in question is 'cciss/c0d0p9', directory is not created and all
this stuff goes directly into /proc (which is real bug).

Warning comes when _second_ partition is mounted.

http://bugzilla.kernel.org/show_bug.cgi?id=11321

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoUpdate flex_bg free blocks and free inodes counters when resizing.
Frederic Bohe [Mon, 8 Sep 2008 14:20:24 +0000 (10:20 -0400)]
Update flex_bg free blocks and free inodes counters when resizing.

This fixes a bug which prevented the newly created inodes after a
resize from being used on filesystems with flex_bg.

Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Avoid printk floods in the face of directory corruption
Eric Sandeen [Thu, 9 Oct 2008 15:15:52 +0000 (11:15 -0400)]
ext4: Avoid printk floods in the face of directory corruption

Note: some people thinks this represents a security bug, since it
might make the system go away while it is printing a large number of
console messages, especially if a serial console is involved.  Hence,
it has been assigned CVE-2008-3528, but it requires that the attacker
either has physical access to your machine to insert a USB disk with a
corrupted filesystem image (at which point why not just hit the power
button), or is otherwise able to convince the system administrator to
mount an arbitrary filesystem image (at which point why not just
include a setuid shell or world-writable hard disk device file or some
such).  Me, I think they're just being silly. --tytso

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: Eugene Teo <eugeneteo@kernel.sg>
16 years agoext4: Properly update i_disksize.
Aneesh Kumar K.V [Sat, 13 Sep 2008 17:06:18 +0000 (13:06 -0400)]
ext4: Properly update i_disksize.

With delayed allocation we use i_data_sem to update i_disksize.  We need
to update i_disksize only if the new size specified is greater than the
current value and we need to make sure we don't race with other
i_disksize update.  With delayed allocation we will switch to the
write_begin function for non-delayed allocation if we are low on free
blocks.  This means the write_begin function for non-delayed allocation
also needs to use the same locking.

We also need to check and update i_disksize even if the new size is less
that inode.i_size because of delayed allocation.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: truncate block allocated on a failed ext4_write_begin
Aneesh Kumar K.V [Sat, 13 Sep 2008 17:10:25 +0000 (13:10 -0400)]
ext4: truncate block allocated on a failed ext4_write_begin

For blocksize < pagesize we need to remove blocks that got allocated in
block_write_begin() if we fail with ENOSPC for later blocks.
block_write_begin() internally does this if it allocated pages locally.
This makes sure we don't have blocks outside inode.i_size during ENOSPC.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Retry block allocation if we have free blocks left
Aneesh Kumar K.V [Tue, 9 Sep 2008 03:05:34 +0000 (23:05 -0400)]
ext4: Retry block allocation if we have free blocks left

When we truncate files, the meta-data blocks released are not reused
untill we commit the truncate transaction.  That means delayed get_block
request will return ENOSPC even if we have free blocks left.  Force a
journal commit and retry block allocation if we get ENOSPC with free
blocks left.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Don't add the inode to journal handle until after the block is allocated
Aneesh Kumar K.V [Tue, 9 Sep 2008 03:08:40 +0000 (23:08 -0400)]
ext4: Don't add the inode to journal handle until after the block is allocated

Make sure we don't add the inode to the journal handle until after the
block allocation, so that a journal commit will not include the inode in
case of block allocation failure.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Fix ext4 nomballoc allocator for ENOSPC
Aneesh Kumar K.V [Tue, 9 Sep 2008 03:09:17 +0000 (23:09 -0400)]
ext4: Fix ext4 nomballoc allocator for ENOSPC

We run into ENOSPC error on nonmballoc ext4, even when there is free blocks
on the filesystem.

The patch includes two changes:

a) Set reservation to NULL if we trying to allocate near group_target_block
from the goal group if the free block in the group is less than windows.
This should give us a better chance to allocate near group_target_block.
This also ensures that if we are not allocating near group_target_block
then we don't trun off reservation. This should enable us to allocate
with reservation from other groups that have large free blocks count.

b) we don't need to check the window size if the block reservation is off.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Signed arithmetic fix
Aneesh Kumar K.V [Thu, 9 Oct 2008 03:12:24 +0000 (23:12 -0400)]
ext4: Signed arithmetic fix

This patch converts some usage of ext4_fsblk_t to s64.  This is needed
so that some of the sign conversion works as expected in if loops.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Switch to non delalloc mode when we are low on free blocks count.
Aneesh Kumar K.V [Thu, 9 Oct 2008 03:13:30 +0000 (23:13 -0400)]
ext4: Switch to non delalloc mode when we are low on free blocks count.

The delayed allocation code allocates blocks during writepages(), which
can not handle block allocation failures.  To deal with this, we switch
away from delayed allocation mode when we are running low on free
blocks.  This also allows us to avoid needing to reserve a large number
of meta-data blocks in case all of the requested blocks are
discontiguous.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Add percpu dirty block accounting.
Aneesh Kumar K.V [Fri, 10 Oct 2008 13:39:00 +0000 (09:39 -0400)]
ext4: Add percpu dirty block accounting.

This patch adds dirty block accounting using percpu_counters.  Delayed
allocation block reservation is now done by updating dirty block
counter.  In a later patch we switch to non delalloc mode if the
filesystem free blocks is greater than 150% of total filesystem dirty
blocks

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Retry block reservation
Aneesh Kumar K.V [Tue, 9 Sep 2008 03:14:50 +0000 (23:14 -0400)]
ext4: Retry block reservation

During block reservation if we don't have enough blocks left, retry
block reservation with smaller block counts.  This makes sure we try
fallocate and DIO with smaller request size and don't fail early.  The
delayed allocation reservation cannot try with smaller block count. So
retry block reservation to handle temporary disk full conditions.  Also
print free blocks details if we fail block allocation during writepages.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Make sure all the block allocation paths reserve blocks
Aneesh Kumar K.V [Thu, 9 Oct 2008 14:56:23 +0000 (10:56 -0400)]
ext4: Make sure all the block allocation paths reserve blocks

With delayed allocation we need to make sure block are reserved before
we attempt to allocate them. Otherwise we get block allocation failure
(ENOSPC) during writepages which cannot be handled. This would mean
silent data loss (We do a printk stating data will be lost). This patch
updates the DIO and fallocate code path to do block reservation before
block allocation. This is needed to make sure parallel DIO and fallocate
request doesn't take block out of delayed reserve space.

When free blocks count go below a threshold we switch to a slow patch
which looks at other CPU's accumulated percpu counter values.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: invalidate pages if delalloc block allocation fails.
Aneesh Kumar K.V [Wed, 20 Aug 2008 01:08:18 +0000 (21:08 -0400)]
ext4: invalidate pages if delalloc block allocation fails.

We are a bit agressive in invalidating all the pages. But
it is ok because we really don't know why the block allocation
failed and it is better to come of the writeback path
so that user can look for more info.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
16 years agoext4: Fix whitespace checkpatch warnings/errors
Theodore Ts'o [Tue, 9 Sep 2008 02:25:24 +0000 (22:25 -0400)]
ext4: Fix whitespace checkpatch warnings/errors

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Fix long long checkpatch warnings
Theodore Ts'o [Tue, 9 Sep 2008 02:25:04 +0000 (22:25 -0400)]
ext4: Fix long long checkpatch warnings

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Add printk priority levels to clean up checkpatch warnings
Theodore Ts'o [Tue, 9 Sep 2008 03:00:52 +0000 (23:00 -0400)]
ext4: Add printk priority levels to clean up checkpatch warnings

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agopercpu counter: clean up percpu_counter_sum_and_set()
Mingming Cao [Thu, 9 Oct 2008 16:50:59 +0000 (12:50 -0400)]
percpu counter: clean up percpu_counter_sum_and_set()

percpu_counter_sum_and_set() and percpu_counter_sum() is the same except
the former updates the global counter after accounting.  Since we are
taking the fbc->lock to calculate the precise value of the counter in
percpu_counter_sum() anyway, it should simply set fbc->count too, as the
percpu_counter_sum_and_set() does.

This patch merges these two interfaces into one.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoLinux 2.6.27
Linus Torvalds [Thu, 9 Oct 2008 22:13:53 +0000 (15:13 -0700)]
Linux 2.6.27

16 years agoDon't allow splice() to files opened with O_APPEND
Linus Torvalds [Thu, 9 Oct 2008 21:04:54 +0000 (14:04 -0700)]
Don't allow splice() to files opened with O_APPEND

This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.

It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example.  So
we could make up any semantics we want, including the old ones.

But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).

So disallow O_APPEND entirely for now.  I doubt anybody cares, and this
way we have one less gray area to worry about.

Reported-and-argued-for-by: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Jens Axboe <ens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Thu, 9 Oct 2008 19:23:54 +0000 (12:23 -0700)]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
  hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
  hwmon: (adt7473) Fix some bogosity in documentation file
  hwmon: Define sysfs interface for energy consumption register
  hwmon: (it87) Prevent power-off on Shuttle SN68PT
  eeepc-laptop: Fix hwmon interface

16 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Thu, 9 Oct 2008 19:23:35 +0000 (12:23 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] correct broken links and email addresses

16 years agoSLOB: fix bogus ksize calculation fix
Matt Mackall [Wed, 8 Oct 2008 19:51:57 +0000 (14:51 -0500)]
SLOB: fix bogus ksize calculation fix

This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.

The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[CPUFREQ] correct broken links and email addresses
Németh Márton [Thu, 9 Oct 2008 12:59:17 +0000 (14:59 +0200)]
[CPUFREQ] correct broken links and email addresses

Replace the no longer working links and email address in the
documentation and in source code.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Dave Jones <davej@redhat.com>
16 years agohwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000 (15:33 +0200)]
hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X

Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agohwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000 (15:33 +0200)]
hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X

The table for the Abit AT8 32X was incorrectly missing an entry
for the sixth ("AUX3") fan. Add this entry, exporting the fan
reading to userspace.

Closes lm-sensors.org ticket #2339.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agohwmon: (adt7473) Fix some bogosity in documentation file
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000 (15:33 +0200)]
hwmon: (adt7473) Fix some bogosity in documentation file

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agohwmon: Define sysfs interface for energy consumption register
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000 (15:33 +0200)]
hwmon: Define sysfs interface for energy consumption register

Describe the sysfs files that were introduced in the ibmaem driver.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agohwmon: (it87) Prevent power-off on Shuttle SN68PT
Jean Delvare [Thu, 9 Oct 2008 13:33:58 +0000 (15:33 +0200)]
hwmon: (it87) Prevent power-off on Shuttle SN68PT

On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349

Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agoeeepc-laptop: Fix hwmon interface
Corentin Chary [Thu, 9 Oct 2008 13:33:57 +0000 (15:33 +0200)]
eeepc-laptop: Fix hwmon interface

Creates a name file in the sysfs directory, that
is needed for the libsensors library to work.
Also rename fan1_pwm to pwm1 and scale its value as needed.

This fixes bug #11520:
http://bugzilla.kernel.org/show_bug.cgi?id=11520

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 8 Oct 2008 18:41:10 +0000 (11:41 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 8 Oct 2008 18:40:19 +0000 (11:40 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd.
  net: Fix netdev_run_todo dead-lock
  tcp: Fix possible double-ack w/ user dma
  net: only invoke dev->change_rx_flags when device is UP
  netrom: Fix sock_orphan() use in nr_release
  ax25: Quick fix for making sure unaccepted sockets get destroyed.
  Revert "ax25: Fix std timer socket destroy handling."
  [Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle
  [Bluetooth] Add reset quirk for new Targus and Belkin dongles
  [Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers

16 years ago[MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur
Ralf Baechle [Wed, 8 Oct 2008 18:14:33 +0000 (19:14 +0100)]
[MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur

Symbol name spaghetti which is too complicated to cleanup on this stage
of the release cycle breaks the build on BCM1480 platforms.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years agotcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd.
Daniele Lacamera [Tue, 7 Oct 2008 22:58:17 +0000 (15:58 -0700)]
tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd.

Because of rounding, in certain conditions, i.e. when in congestion
avoidance state rho is smaller than 1/128 of the current cwnd, TCP
Hybla congestion control starves and the cwnd is kept constant
forever.

This patch forces an increment by one segment after #send_cwnd calls
without increments(newreno behavior).

Signed-off-by: Daniele Lacamera <root@danielinux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agonet: Fix netdev_run_todo dead-lock
Herbert Xu [Tue, 7 Oct 2008 22:50:03 +0000 (15:50 -0700)]
net: Fix netdev_run_todo dead-lock

Benjamin Thery tracked down a bug that explains many instances
of the error

unregister_netdevice: waiting for %s to become free. Usage count = %d

It turns out that netdev_run_todo can dead-lock with itself if
a second instance of it is run in a thread that will then free
a reference to the device waited on by the first instance.

The problem is really quite silly.  We were trying to create
parallelism where none was required.  As netdev_run_todo always
follows a RTNL section, and that todo tasks can only be added
with the RTNL held, by definition you should only need to wait
for the very ones that you've added and be done with it.

There is no need for a second mutex or spinlock.

This is exactly what the following patch does.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluet...
David S. Miller [Tue, 7 Oct 2008 22:32:20 +0000 (15:32 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6

16 years agotcp: Fix possible double-ack w/ user dma
Ali Saidi [Tue, 7 Oct 2008 22:31:19 +0000 (15:31 -0700)]
tcp: Fix possible double-ack w/ user dma

From: Ali Saidi <saidi@engin.umich.edu>

When TCP receive copy offload is enabled it's possible that
tcp_rcv_established() will cause two acks to be sent for a single
packet. In the case that a tcp_dma_early_copy() is successful,
copied_early is set to true which causes tcp_cleanup_rbuf() to be
called early which can send an ack. Further along in
tcp_rcv_established(), __tcp_ack_snd_check() is called and will
schedule a delayed ACK. If no packets are processed before the delayed
ack timer expires the packet will be acked twice.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agonet: only invoke dev->change_rx_flags when device is UP
Patrick McHardy [Tue, 7 Oct 2008 22:26:48 +0000 (15:26 -0700)]
net: only invoke dev->change_rx_flags when device is UP

Jesper Dangaard Brouer <hawk@comx.dk> reported a bug when setting a VLAN
device down that is in promiscous mode:

When the VLAN device is set down, the promiscous count on the real
device is decremented by one by vlan_dev_stop(). When removing the
promiscous flag from the VLAN device afterwards, the promiscous
count on the real device is decremented a second time by the
vlan_change_rx_flags() callback.

The root cause for this is that the ->change_rx_flags() callback is
invoked while the device is down. The synchronization is meant to mirror
the behaviour of the ->set_rx_mode callbacks, meaning the ->open function
is responsible for doing a full sync on open, the ->close() function is
responsible for doing full cleanup on ->stop() and ->change_rx_flags()
is meant to do incremental changes while the device is UP.

Only invoke ->change_rx_flags() while the device is UP to provide the
intended behaviour.

Tested-by: Jesper Dangaard Brouer <jdb@comx.dk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoSLOB: fix bogus ksize calculation
Matt Mackall [Tue, 7 Oct 2008 16:37:35 +0000 (11:37 -0500)]
SLOB: fix bogus ksize calculation

SLOB's ksize calculation was braindamaged and generally harmlessly
underreported the allocation size. But for very small buffers, it could
in fact overreport them, leading code depending on krealloc to overrun
the allocation and trample other data.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoRevert "V4L/DVB (8904): cx88: add missing unlock_kernel"
Linus Torvalds [Tue, 7 Oct 2008 14:54:34 +0000 (07:54 -0700)]
Revert "V4L/DVB (8904): cx88: add missing unlock_kernel"

This reverts commit 135aedc38e812b922aa56096f36a3d72ffbcf2fb, as
requested by Hans Verkuil.

It was a patch for 2.6.28 where the BKL was pushed down from v4l core to
the drivers, not for 2.6.27!

Requested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoLinux 2.6.27-rc9
Linus Torvalds [Mon, 6 Oct 2008 23:39:58 +0000 (16:39 -0700)]
Linux 2.6.27-rc9

16 years agoMarker depmod fix core kernel list
Mathieu Desnoyers [Mon, 6 Oct 2008 13:30:12 +0000 (09:30 -0400)]
Marker depmod fix core kernel list

* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap.  It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there.  Is this a bug in systemtap, or in how Module.markers is getting
> built?   And is there a file that contains the equivalent information
> for markers located in non-modules code?

I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360c29956510b2fe1a953bd4968536f7216)

Especially :

  -   add_marker(mod, marker, fmt);
  +   if (!mod->skip)
  +     add_marker(mod, marker, fmt);
    }
    return;
   fail:

Here is a fix that should take care if this problem.

Thanks for the bug report!

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Mon, 6 Oct 2008 21:30:02 +0000 (14:30 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: call touch_softlockup_watchdog on resume
  kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI

16 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 6 Oct 2008 21:29:16 +0000 (14:29 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: gart iommu have direct mapping when agp is present too

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Mon, 6 Oct 2008 21:27:57 +0000 (14:27 -0700)]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: workaround for bogus gcc warning in ide_sysfs_register_port()
  ide-cd: Optiarc DVD RW AD-7200A does play audio
  IDE: Fix platform device registration in Swarm IDE driver (v2)
  ide-dma: fix ide_build_dmatable() for TRM290
  ide-cd: temporary tray close fix

16 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 6 Oct 2008 21:27:39 +0000 (14:27 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y
  [MIPS] Fix CMP Kconfig configuration and mark as broken.

16 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Mon, 6 Oct 2008 21:27:15 +0000 (14:27 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/mchehab/v4l-dvb

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits)
  V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue
  V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U
  V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.
  V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.
  V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.
  V4L/DVB (9053): fix buffer overflow in uvc-video
  V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow
  V4L/DVB (9037): Fix support for Hauppauge Nova-S SE
  V4L/DVB (9029): Fix deadlock in demux code
  V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick
  V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick
  V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600
  V4L/DVB (8963): s2255drv field count fix
  V4L/DVB (8961): zr36067: Fix RGBR pixel format
  V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h
  V4L/DVB (8958): zr36067: Return proper bytes-per-line value
  V4L/DVB (8957): zr36067: Restore the default pixel format
  V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open
  V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800)
  V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom.
  ...

16 years agoatmel-mci: Initialize BLKR before sending data transfer command
Haavard Skinnemoen [Mon, 6 Oct 2008 18:09:53 +0000 (20:09 +0200)]
atmel-mci: Initialize BLKR before sending data transfer command

The atmel-mci driver sometimes fails data transfers like this:

   mmcblk0: error -5 transferring data
   end_request: I/O error, dev mmcblk0, sector 2749769
   end_request: I/O error, dev mmcblk0, sector 2749777

It turns out that this might be caused by the BLKR register (which
contains the block size and the number of blocks being transfered) being
initialized too late. This patch moves the initialization of BLKR so
that it contains the correct value before the block transfer command is
sent.

This error is difficult to reproduce, but if you insert a long delay
(mdelay(10) or thereabouts) between the calls to atmci_start_command()
and atmci_submit_data(), all transfers seem to fail without this patch,
while I haven't seen any failures with this patch.

Reported-by: Hein_Tibosch <hein_tibosch@yahoo.es>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agonetrom: Fix sock_orphan() use in nr_release
Jarek Poplawski [Mon, 6 Oct 2008 19:54:57 +0000 (12:54 -0700)]
netrom: Fix sock_orphan() use in nr_release

While debugging another bug it was found that NetRom socks
are sometimes seen unorphaned in sk_free(). This patch moves
sock_orphan() in nr_release() to the beginning (like in ax25,
or rose).

Reported-and-tested-by: Bernard Pidoux f6bvp <f6bvp@free.fr>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoax25: Quick fix for making sure unaccepted sockets get destroyed.
David S. Miller [Mon, 6 Oct 2008 19:53:50 +0000 (12:53 -0700)]
ax25: Quick fix for making sure unaccepted sockets get destroyed.

Since we reverted 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74 ("ax25: Fix
std timer socket destroy handling.") we have to put some kind of fix
in to cure the issue whereby unaccepted connections do not get destroyed.

The approach used here is from Tihomir Heidelberg - 9a4gl

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoRevert "ax25: Fix std timer socket destroy handling."
David S. Miller [Mon, 6 Oct 2008 19:48:29 +0000 (12:48 -0700)]
Revert "ax25: Fix std timer socket destroy handling."

This reverts commit 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74.

It causes all kinds of problems, based upon a report by
Bernard (f6bvp) and analysis by Jarek Poplawski.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agokgdb: call touch_softlockup_watchdog on resume
Jason Wessel [Mon, 6 Oct 2008 18:50:59 +0000 (13:50 -0500)]
kgdb: call touch_softlockup_watchdog on resume

The softlockup watchdog needs to be touched when resuming the from the
kgdb stopped state to avoid the printk that a CPU is stuck if the
debugger was active for longer than the softlockup threshold.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
16 years agokgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
Jan Kiszka [Mon, 6 Oct 2008 18:50:59 +0000 (13:50 -0500)]
kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI

Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest,
I came across spurious unhandled NMIs while running the singlestep test.
Looking closer at the code path each NMI takes when KGDB is enabled, I
noticed that kgdb_nmicallback is called twice per event: One time via
DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first
invocation cures the unhandled NMIs here.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
16 years agox86 ACPI: Blacklist two HP machines with buggy BIOSes
Rafael J. Wysocki [Mon, 6 Oct 2008 09:59:29 +0000 (11:59 +0200)]
x86 ACPI: Blacklist two HP machines with buggy BIOSes

There is a bug in the BIOSes of some HP boxes with AMD Turions which
connects IO-APIC pins with ACPI thermal trip points in such a way that
if the state of the IO-APIC is not as expected by the (buggy) BIOS, the
thermal trip points are set to insanely low values (usually all of them
become 16 degrees Celsius).  As a result, thermal throttling kicks in
and knock the system down to its shoes.

Unfortunately some of the recent IO-APIC changes made the bug show up.
To prevent this from happening, blacklist machines that are known to be
affected (nx6115 and 6715b in this particular case).

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as
a regression from 2.6.26.

On my box it was caused by:

commit 691874fa96d6349a8b60f8ea9c2bae52ece79941
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Tue May 27 21:19:51 2008 +0100

    x86: I/O APIC: timer through 8259A second-chance

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
and the whole story is described in this (huge) thread:

    http://marc.info/?l=linux-kernel&m=121358440508410&w=4

Matthew Garrett told us about that happening on the nx6125:

    http://marc.info/?l=linux-kernel&m=121396307411930&w=4

and then Maciej analysed the breakage on the basis of a DSDT from the
nx6325:

    http://marc.info/?l=linux-kernel&m=121401068718826&w=4

As far as the Dmitry's and Jason's boxes are concerned, I recognized the
symptoms and asked them to verify that the blacklisting helped.

It appears that the buggy BIOS code has been copy-pasted to the entire
range of machines, for no good reason.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle
Marcel Holtmann [Mon, 6 Oct 2008 10:22:52 +0000 (12:22 +0200)]
[Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle

The new A-Link Bluetooth dongle is another one based on the BCM2046 chip
from Broadcom and it also needs to send HCI_Reset before it becomes fully
operational. Without the quirk it will show a lot of I/O errors.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
16 years ago[Bluetooth] Add reset quirk for new Targus and Belkin dongles
Marcel Holtmann [Mon, 6 Oct 2008 10:22:51 +0000 (12:22 +0200)]
[Bluetooth] Add reset quirk for new Targus and Belkin dongles

Targus and Belkin have come out with new Bluetooth 2.1 capable dongles
using the latest BCM2046 chip from Broadcom. Both of them are so called
HID proxy dongles and they need to send HCI_Reset before they become
fully operational.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
16 years ago[Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers
Marcel Holtmann [Mon, 6 Oct 2008 10:22:51 +0000 (12:22 +0200)]
[Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers

The transfer buffer of an URB will be automatically freed when using
the URB_FREE_BUFFER transfer_flag. So the extra calls to kfree() will
cause a double free.

Reported-by: Justin Mattock <justinmattock@gmail.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
16 years ago[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y
Ralf Baechle [Fri, 3 Oct 2008 21:43:38 +0000 (22:43 +0100)]
[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Fix CMP Kconfig configuration and mark as broken.
Ralf Baechle [Fri, 3 Oct 2008 23:06:29 +0000 (00:06 +0100)]
[MIPS] Fix CMP Kconfig configuration and mark as broken.

Because sync-r4k.c doesn't build.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years agoide: workaround for bogus gcc warning in ide_sysfs_register_port()
Bartlomiej Zolnierkiewicz [Sun, 5 Oct 2008 16:23:28 +0000 (18:23 +0200)]
ide: workaround for bogus gcc warning in ide_sysfs_register_port()

Reported-by: "Steven Noonan" <steven@uplinklabs.net>
Suggested-by: "Elias Oltmanns" <eo@nebensachen.de>
Cc: mingo@elte.hu
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: Optiarc DVD RW AD-7200A does play audio
Bodo Eggert [Sun, 5 Oct 2008 16:23:28 +0000 (18:23 +0200)]
ide-cd: Optiarc DVD RW AD-7200A does play audio

The Optiarc DVD RW AD-7200A can play audio, but tells it could not.

Signed-off-by: Bodo Eggert <7eggert@gmx.de>
Tested-by: Nick Warne <nick@ukfsn.org>
Received-from: Borislav Petkov <petkovbb@googlemail.com>
[bart: keep "audio" quirks together]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoIDE: Fix platform device registration in Swarm IDE driver (v2)
Ralf Baechle [Sun, 5 Oct 2008 16:23:28 +0000 (18:23 +0200)]
IDE: Fix platform device registration in Swarm IDE driver (v2)

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-dma: fix ide_build_dmatable() for TRM290
Sergei Shtylylov [Sun, 5 Oct 2008 16:23:27 +0000 (18:23 +0200)]
ide-dma: fix ide_build_dmatable() for TRM290

Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes,
judging from the code immediately preceding this check.  So, we must never try
to "split" the PRD for TRM290.

This is probably never hit anyway -- with the DMA buffers aligned to at least
512 bytes and ATAPI DMA not being used for non block I/O commands...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: temporary tray close fix
Borislav Petkov [Sun, 5 Oct 2008 16:23:27 +0000 (18:23 +0200)]
ide-cd: temporary tray close fix

This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602.

A more generic fix for drives which cannot autoclose tray will follow.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
[bart: add an extra parentheses for consistency with the rest of kernel code]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agox86: gart iommu have direct mapping when agp is present too
Yinghai Lu [Sat, 4 Oct 2008 22:55:12 +0000 (15:55 -0700)]
x86: gart iommu have direct mapping when agp is present too

move init_memory_mapping() out of init_k8_gatt.

for: http://bugzilla.kernel.org/show_bug.cgi?id=11676
    2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression

This is needed because we need to map the GART aperture even
if the GATT is not initialized.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoV4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue
Wiktor Grebla [Sun, 28 Sep 2008 04:37:48 +0000 (01:37 -0300)]
V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue

Fixed audio clicking problem which could be heard when using analog tv or composite input

Signed-off-by: Wiktor Grebla <greblus@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U
Darron Broad [Tue, 30 Sep 2008 05:46:41 +0000 (02:46 -0300)]
V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U

Correct firmware type to MTS
Correct audio routing for composite/s-video
Add DVB-T detection.

This patch uses the eeprom hash method for detection as the vendor/product
ids are also used for the DIGIVOX_AD. This may be a clone of the same
product. Explanatory text has been added prior to the hask look-up in
anticipation that it may help others.

The following has been tested to work:
Analogue TV (PAL-I)
Composite In
DVB-T (UK Crystal Palace)
USB AUDIO

The following has not been tested but probably works:
S-Video In

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9092): gspca: Bad init values for sonixj ov7660.
Jean-Francois Moine [Thu, 2 Oct 2008 11:06:59 +0000 (08:06 -0300)]
V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.
Jean-Francois Moine [Sun, 21 Sep 2008 06:28:55 +0000 (03:28 -0300)]
V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.
Shane [Sun, 14 Sep 2008 07:17:46 +0000 (04:17 -0300)]
V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.

This makes auto gain functional on 04fc:0561.

Signed-off-by: Shane <gnome42@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9053): fix buffer overflow in uvc-video
Ralph Loader [Tue, 23 Sep 2008 00:06:48 +0000 (21:06 -0300)]
V4L/DVB (9053): fix buffer overflow in uvc-video

There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c:

INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc
INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975
...

A fixed size 8-byte buffer is allocated, and a variable size field is read
into it; there is no particular bound on the size of the field (it is
dependent on hardware and configuration) and it can overflow [also
verified by inserting printk's.]

The patch attempts to size the buffer to the correctly.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow
Patrick Boettcher [Sun, 7 Sep 2008 19:04:38 +0000 (16:04 -0300)]
V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow

The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00.

Thanks to Oliver Endriss for pointing that out.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9037): Fix support for Hauppauge Nova-S SE
Patrick Boettcher [Sat, 6 Sep 2008 16:31:58 +0000 (13:31 -0300)]
V4L/DVB (9037): Fix support for Hauppauge Nova-S SE

Different backends have different input busses (saa7146, flexcop).
To reflect that a config-option to the s5h1420-driver was added which makes
the output mode selectable.

Furthermore the s5h1420-driver is now doing the same i2c-method as it was done
before adding support for other i2c-users.

This patch needs to go into the current release of the kernel, as this driver
is currently broken.

(Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (9029): Fix deadlock in demux code
Andreas Oberritter [Wed, 24 Sep 2008 08:00:37 +0000 (05:00 -0300)]
V4L/DVB (9029): Fix deadlock in demux code

The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback,
dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and
dvb_dmx_swfilter_204 may be called from both interrupt and process
context. Therefore they need to be protected by spin_lock_irqsave()
instead of spin_lock().

This fixes a deadlock discovered by lockdep.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
16 years agoV4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick
Michael Krufky [Tue, 16 Sep 2008 19:46:42 +0000 (16:46 -0300)]
V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick

2040:5510 is the same hardware as 2040:5500

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>