powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')

[ Upstream commit 8a87a507714386efc39c3ae6fa24d4f79846b522 ]

  AS      arch/powerpc/platforms/52xx/lite5200_sleep.o
arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages:
arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression

In the following code, 'addi' is wrong, has to be 'add'

/* local udelay in sram is needed */
  udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
addi r12, r13, r12 /* end */

Fixes: ee983079ce04 ("[POWERPC] MPC5200 low power mode")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cb4cec9131c8577803367f1699209a7e104cec2a.1619025821.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices

[ Upstream commit 7dd9a40fd6e0d0f1fd8e1931c007e080801dfdce ]

When the error check in ath9k_hw_read_revisions() was added, it checked for
-EIO which is what ath9k_regread() in the ath9k_htc driver uses. However,
for plain ath9k, the register read function uses ioread32(), which just
returns -1 on error. So if such a read fails, it still gets passed through
and ends up as a weird mac revision in the log output.

Fix this by changing ath9k_regread() to return -1 on error like ioread32()
does, and fix the error check to look for that instead of -EIO.

Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: davinci_emac: Fix incorrect masking of tx and rx error channel

[ Upstream commit d83b8aa5207d81f9f6daec9888390f079cc5db3f ]

The bit-masks used for the TXERRCH and RXERRCH (tx and rx error channels)
are incorrect and always lead to a zero result. The mask values are
currently the incorrect post-right shifted values, fix this by setting
them to the currect values.

(I double checked these against the TMS320TCI6482 data sheet, section
5.30, page 127 to ensure I had the correct mask values for the TXERRCH
and RXERRCH fields in the MACSTATUS register).

Addresses-Coverity: ("Operands don't affect result")
Fixes: a6286ee630f6 ("net: Add TI DaVinci EMAC driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails

[ Upstream commit 783a11bf2400e5d5c42a943c3083dc0330751842 ]

When i40iw_hmc_sd_one fails, chunk is freed without the deletion of chunk
entry in the PBLE info list.

Fix it by adding the chunk entry to the PBLE info list only after
successful addition of SD in i40iw_hmc_sd_one.

This fixes a static checker warning reported here:
  https://lore.kernel.org/linux-rdma/YHV4CFXzqTm23AOZ@mwanda/

Fixes: 9715830157be ("i40iw: add pble resource files")
Link: https://lore.kernel.org/r/20210416002104.323-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock/vmci: log once the failed queue pair allocation

[ Upstream commit e16edc99d658cd41c60a44cc14d170697aa3271f ]

VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.

VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:

    qp_alloc_hypercall result = -20
    Could not attach to queue pair with -20

"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c3307
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.

Since the error message can be useful in some cases, print it only once.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwl8k: Fix a double Free in mwl8k_probe_hw

[ Upstream commit a8e083ee8e2a6c94c29733835adae8bf5b832748 ]

In mwl8k_probe_hw, hw->priv->txq is freed at the first time by
dma_free_coherent() in the call chain:
if(!priv->ap_fw)->mwl8k_init_txqs(hw)->mwl8k_txq_init(hw, i).

Then in err_free_queues of mwl8k_probe_hw, hw->priv->txq is freed
at the second time by mwl8k_txq_deinit(hw, i)->dma_free_coherent().

My patch set txq->txd to NULL after the first free to avoid the
double free.

Fixes: a66098daacee2 ("mwl8k: Marvell TOPDOG wireless driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210402182627.4256-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: sh7760: fix IRQ error path

[ Upstream commit 92dfb27240fea2776f61c5422472cb6defca7767 ]

While adding the invalid IRQ check after calling platform_get_irq(),
I managed to overlook that the driver has a complex error path in its
probe() method, thus a simple *return* couldn't be used.  Use a proper
*goto* instead!

Fixes: e5b2e3e74201 ("i2c: sh7760: add IRQ check")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: extract host bridge from pci_bus prior to bus removal

[ Upstream commit 38d0b1c9cec71e6d0f3bddef0bbce41d05a3e796 ]

The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.

Store the host_bridge reference in a separate variable prior to
pci_bus_remove().

Fixes: 7340056567e3 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: pci-legacy: stop using of_pci_range_to_resource

[ Upstream commit 3ecb9dc1581eebecaee56decac70e35365260866 ]

Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after
of_pci_range_to_resource() change").

Most MIPS platforms do not define PCI_IOBASE, nor implement
pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS
platforms. of_pci_range_to_resource passes the _start address_ of the IO
range into pci_address_to_pio, which then checks it against
IO_SPACE_LIMIT and fails, because for MIPS platforms that use
pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much
higher than 0xffff.

In fact, pci-mt7621 in staging already works around this problem, see
commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set
resource limits")

So just stop using of_pci_range_to_resource, which does not work for
MIPS.

Fixes PCI errors like:
  pci_bus 0000:00: root bus resource [io  0xffffffff]

Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: sh7760: add IRQ check

[ Upstream commit e5b2e3e742015dd2aa6bc7bcef2cb59b2de1221c ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: a26c20b1fa6d ("i2c: Renesas SH7760 I2C master driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: jz4780: add IRQ check

[ Upstream commit c5e5f7a8d931fb4beba245bdbc94734175fda9de ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: emev2: add IRQ check

[ Upstream commit bb6129c32867baa7988f7fd2066cf18ed662d240 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: 5faf6e1f58b4 ("i2c: emev2: add driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: cadence: add IRQ check

[ Upstream commit 5581c2c5d02bc63a0edb53e061c8e97cd490646e ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: thunderx: Fix unintentional sign extension issue

[ Upstream commit e701a25840360706fe4cf5de0015913ca19c274b ]

The shifting of the u8 integers rq->caching by 26 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that rq->caching is
greater than 0x1f then all then all the upper 32 bits of
the u64 end up as also being set because of the int
sign-extension. Fix this by casting the u8 values to a
u64 before the 26 bit left shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt7601u: fix always true expression

[ Upstream commit 87fce88658ba047ae62e83497d3f3c5dc22fa6f9 ]

Currently the expression ~nic_conf1 is always true because nic_conf1
is a u16 and according to 6.5.3.3 of the C standard the ~ operator
promotes the u16 to an integer before flipping all the bits. Thus
the top 16 bits of the integer result are all set so the expression
is always true.  If the intention was to flip all the bits of nic_conf1
then casting the integer result back to a u16 is a suitabel fix.

Interestingly static analyzers seem to thing a bitwise ! should be
used instead of ~ for this scenario, so I think the original intent
of the expression may need some extra consideration.

Addresses-Coverity: ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: bail out if cipher schemes are invalid

[ Upstream commit db878e27a98106a70315d264cc92230d84009e72 ]

If any of the cipher schemes specified by the driver are invalid, bail
out and fail the registration rather than just warning.  Otherwise, we
might later crash when we try to use the invalid cipher scheme, e.g.
if the hdr_len is (significantly) less than the pn_offs + pn_len, we'd
have an out-of-bounds access in RX validation.

Fixes: 2475b1cc0d52 ("mac80211: add generic cipher scheme support")
Link: https://lore.kernel.org/r/20210408143149.38a3a13a1b19.I6b7f5790fa0958ed8049cf02ac2a535c61e9bc96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: iommu: fix build when neither PCI or IBMVIO is set

[ Upstream commit b27dadecdf9102838331b9a0b41ffc1cfe288154 ]

When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.

Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
  178 | static struct notifier_block fail_iommu_bus_notifier = {

Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Fix PMU constraint check for EBB events

[ Upstream commit 10f8f96179ecc7f69c927f6d231f6d02736cea83 ]

The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.

Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.

  [35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
  at 10004a18 nip 10004a18 lr 100049f8 code 1 in
  cpu_event_pinned_vs_ebb_test[10000000+10000]

Test results after the patch:

  $ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
  test: cpu_event_pinned_vs_ebb
  tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
  Binding to cpu 8
  EBB Handler is at 0x100050c8
  read error on event 0x7fffe6bd4040!
  PM_RUN_INST_CMPL: result 9872 running/enabled 37930432
  success: cpu_event_pinned_vs_ebb

This bug was hidden by other logic until commit 1908dc911792 (perf:
Tweak perf_event_attr::exclusive semantics).

Fixes: 4df489991182 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit 1908dc911792]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

liquidio: Fix unintented sign extension of a left shift of a u16

[ Upstream commit 298b58f00c0f86868ea717426beb5c1198772f81 ]

The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port
(a u16) left 24 places. There are two subtle issues here, first the
shift gets promoted to an signed int and then sign extended to a u64.
If oct->pcie_port is 0x80 or more then the upper bits get sign extended
to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it
needs to be cast to a u64 for all the bits to not overflow.

It is entirely possible that the u16 port value is never large enough
for this to fail, but it is useful to fix unintended overflows such
as this.

Fix this by casting the port parameter to the macro to a u64 before
the shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: 5bc67f587ba7 ("liquidio: CN23XX register definitions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls

[ Upstream commit 5fb45414ae03421255593fd5556aa2d1d82303aa ]

There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity.  This patch
adds those missing checks.

Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1475943 ("Error handling issues")
Addresses-Coverity-ID: 1475944 ("Error handling issues")
Addresses-Coverity-ID: 1475945 ("Error handling issues")
Fixes: b1ce7ba619d9 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once")
Fixes: e5779998bf8b ("ALSA: usb-audio: refactor code")
Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook
Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: pn533: prevent potential memory corruption

[ Upstream commit ca4d4c34ae9aa5c3c0da76662c5e549d2fc0cc86 ]

If the "type_a->nfcid_len" is too large then it would lead to memory
corruption in pn533_target_found_type_a() when we do:

memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);

Fixes: c3b1e1e8a76f ("NFC: Export NFCID1 from pn533")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: core: remove redundant spin_lock pair in snd_card_disconnect

[ Upstream commit abc21649b3e5c34b143bf86f0c78e33d5815e250 ]

modification in commit 2a3f7221acdd ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.

Fixes: 2a3f7221acdd ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/prom: Mark identical_pvr_fixup as __init

[ Upstream commit 1ef1dd9c7ed27b080445e1576e8a05957e0e4dfc ]

If identical_pvr_fixup() is not inlined, there are two modpost warnings:

WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.

WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.

identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245de ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").

Fixes: 14b3d926a22b ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lapbether: Prevent racing when checking whether the netif is running

[ Upstream commit 5acd0cfbfbb5a688da1bfb1a2152b0c855115a35 ]

There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.

However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).

This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars

[ Upstream commit 210e4c89ef61432040c6cd828fefa441f4887186 ]

The 'ret' variable was initialized to zero but then it was not updated
from the fprintf() return, fix it.

Reported-by: Yang Li <yang.lee@linux.alibaba.com>
cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
cc: Ingo Molnar <mingo@redhat.com>
cc: Jiri Olsa <jolsa@redhat.com>
cc: Mark Rutland <mark.rutland@arm.com>
cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Fixes: 90f18e63fbd00513 ("perf symbols: List symbols in a dso in ascending name order")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: plantronics: Workaround for double volume key presses

[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]

Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.

The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.

Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/events/amd/iommu: Fix sysfs type mismatch

[ Upstream commit de5bc7b425d4c27ae5faa00ea7eb6b9780b9a355 ]

dev_attr_show() calls _iommu_event_show() via an indirect call but
_iommu_event_show()'s type does not currently match the type of the
show() member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.

$ cat /sys/devices/amd_iommu_1/events/mem_dte_hit
csource=0x0a

$ dmesg | grep "CFI failure"
[ 3526.735140] CFI failure (target: _iommu_event_show...):

Change _iommu_event_show() and 'struct amd_iommu_event_desc' to
'struct device_attribute' so that there is no more CFI violation.

Fixes: 7be6296fdd75 ("perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: core: fix resource leaks in hsi_add_client_from_dt()

[ Upstream commit 5c08b0f75575648032f309a6f58294453423ed93 ]

If some of the allocations fail between the dev_set_name() and the
device_register() then the name will not be freed.  Fix this by
moving dev_set_name() directly in front of the call to device_register().

Fixes: a2aa24734d9d ("HSI: Add common DT binding for HSI client devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sni_53c710: Add IRQ check

[ Upstream commit 1160d61bc51e87e509cfaf9da50a0060f67b6de4 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV
further below).  Stop calling request_irq() with the invalid IRQ #s.

Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru
Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sun3x_esp: Add IRQ check

[ Upstream commit 14b321380eb333c82853d7d612d0995f05f88fdc ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code.  Stop calling request_irq() with the invalid IRQ #s.

Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru
Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: jazz_esp: Add IRQ check

[ Upstream commit 38fca15c29db6ed06e894ac194502633e2a7d1fb ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code.  Stop calling request_irq() with the invalid IRQ #s.

Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru
Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: uniphier: Fix potential infinite loop

[ Upstream commit f6b1340dc751a6caa2a0567b667d0f4f4172cd58 ]

The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents.  Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.

Addresses-Coverity: ("Infinite loop")
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-remote: fix dvb_usb_nec_rc_key_to_event type mismatch

[ Upstream commit 0fa430e96d3c3561a78701f51fd8593da68b8474 ]

gcc-11 warns about the prototype not exactly matching the function
definition:

drivers/media/usb/dvb-usb/dvb-usb-remote.c:363:20: error: argument 2 of type ‘u8[5]’ {aka ‘unsigned char[5]’} with mismatched bound [-Werror=array-parameter=]
  363 |                 u8 keybuf[5], u32 *event, int *state)
      |                 ~~~^~~~~~~~~
In file included from drivers/media/usb/dvb-usb/dvb-usb-common.h:13,
                 from drivers/media/usb/dvb-usb/dvb-usb-remote.c:9:
drivers/media/usb/dvb-usb/dvb-usb.h:490:65: note: previously declared as ‘u8[]’ {aka ‘unsigned char[]’}
  490 | extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
      |                                                                 ^~~~

Fixes: 776338e121b9 ("[PATCH] dvb: Add generalized dvb-usb driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fcoe: Fix mismatched fcoe_wwn_from_mac declaration

[ Upstream commit 5b11c9d80bde81f6896cc85b23aeaa9502a704ed ]

An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in
the declaration, but now gcc-11 warns about this:

drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=]
 1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN],
      |                       ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33:
include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’
  252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
      |                       ~~~~~~~~~~~~~~^~~~~

Change the type back to what the function definition uses.

Link: https://lore.kernel.org/r/20210322164702.957810-1-arnd@kernel.org
Fixes: fdd78027fd47 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: libahci_platform: fix IRQ check

[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ]

Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...

Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sata_mv: add IRQ checks

[ Upstream commit e6471a65fdd5efbb8dd2732dd0f063f960685ceb ]

The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...

Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).

Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pata_ipx4xx_cf: fix IRQ check

[ Upstream commit e379b40cc0f179403ce0b82b7e539f635a568da5 ]

The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs).  Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0  as  an indication that polling should be used anyway...

Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pata_arasan_cf: fix IRQ check

[ Upstream commit c7e8f404d56b99c80990b19a402c3f640d74be05 ]

The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking code
to pass the positive IRQ #s to ata_host_activate(), propagate upstream
-EPROBE_DEFER, and set up the driver to polling mode on (negative) errors
and IRQ0 (libata treats IRQ #0 as a polling mode anyway)...

Fixes: a480167b23ef ("pata_arasan_cf: Adding support for arasan compact flash host controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: m88rs6000t: avoid potential out-of-bounds reads on arrays

[ Upstream commit 9baa3d64e8e2373ddd11c346439e5dfccb2cbb0d ]

There a 3 array for-loops that don't check the upper bounds of the
index into arrays and this may lead to potential out-of-bounds
reads.  Fix this by adding array size upper bounds checks to be
full safe.

Addresses-Coverity: ("Out-of-bounds read")

Link: https://lore.kernel.org/linux-media/20201007121628.20676-1-colin.king@canonical.com
Fixes: 333829110f1d ("[media] m88rs6000t: add new dvb-s/s2 tuner for integrated chip M88RS6000")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: omap4iss: return error code when omap4iss_get() failed

[ Upstream commit 8938c48fa25b491842ece9eb38f0bea0fcbaca44 ]

If omap4iss_get() failed, it need return error code in iss_probe().

Fixes: 59f0ad807681 ("[media] v4l: omap4iss: Add support for OMAP4...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: fix assignment of dev->fbuf_out_flags

[ Upstream commit 5cde22fcc7271812a7944c47b40100df15908358 ]

Currently the chroma_flags and alpha_flags are being zero'd with a bit-wise
mask and the following statement should be bit-wise or'ing in the new flag
bits but instead is making a direct assignment.  Fix this by using the |=
operator rather than an assignment.

Addresses-Coverity: ("Unused value")

Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ttyprintk: Add TTY hangup callback.

[ Upstream commit c0070e1e60270f6a1e09442a9ab2335f3eaeaad2 ]

syzbot is reporting hung task due to flood of

  tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__,
           port->count);

message [1], for ioctl(TIOCVHANGUP) prevents tty_port_close() from
decrementing port->count due to tty_hung_up_p() == true.

----------
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
int i;
int fd[10];

for (i = 0; i < 10; i++)
fd[i] = open("/dev/ttyprintk", O_WRONLY);
ioctl(fd[0], TIOCVHANGUP);
for (i = 0; i < 10; i++)
close(fd[i]);
close(open("/dev/ttyprintk", O_WRONLY));
return 0;
}
----------

When TTY hangup happens, port->count needs to be reset via
"struct tty_operations"->hangup callback.

[1] https://syzkaller.appspot.com/bug?id=39ea6caa479af471183997376dc7e90bc7d64a6a

Reported-by: syzbot <syzbot+43e93968b964e369db0b@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+3ed715090790806d8b18@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+43e93968b964e369db0b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 24b4b67d17c308aa ("add ttyprintk driver")
Link: https://lore.kernel.org/r/17e0652d-89b7-c8c0-fb53-e7566ac9add4@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Drivers: hv: vmbus: Increase wait time for VMbus unload

[ Upstream commit 77db0ec8b7764cb9b09b78066ebfd47b2c0c1909 ]

When running in Azure, disks may be connected to a Linux VM with
read/write caching enabled. If a VM panics and issues a VMbus
UNLOAD request to Hyper-V, the response is delayed until all dirty
data in the disk cache is flushed.  In extreme cases, this flushing
can take 10's of seconds, depending on the disk speed and the amount
of dirty data. If kdump is configured for the VM, the current 10 second
timeout in vmbus_wait_for_unload() may be exceeded, and the UNLOAD
complete message may arrive well after the kdump kernel is already
running, causing problems.  Note that no problem occurs if kdump is
not enabled because Hyper-V waits for the cache flush before doing
a reboot through the BIOS/UEFI code.

Fix this problem by increasing the timeout in vmbus_wait_for_unload()
to 100 seconds. Also output periodic messages so that if anyone is
watching the serial console, they won't think the VM is completely
hung.

Fixes: 911e1987efc8 ("Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1618894089-126662-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/platform/uv: Fix !KEXEC build failure

[ Upstream commit c2209ea55612efac75de0a58ef5f7394fae7fa0f ]

When KEXEC is disabled, the UV build fails:

  arch/x86/platform/uv/uv_nmi.c:875:14: error: ‘uv_nmi_kexec_failed’ undeclared (first use in this function)

Since uv_nmi_kexec_failed is only defined in the KEXEC_CORE #ifdef branch,
this code cannot ever have been build tested:

if (main)
pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n");
atomic_set(&uv_nmi_kexec_failed, 1);

Nor is this use possible in uv_handle_nmi():

                atomic_set(&uv_nmi_kexec_failed, 0);

These bugs were introduced in this commit:

    d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails")

Which added the uv_nmi_kexec_failed assignments to !KEXEC code, while making the
definition KEXEC-only - apparently without testing the !KEXEC case.

Instead of complicating the #ifdef maze, simplify the code by requiring X86_UV
to depend on KEXEC_CORE. This pattern is present in other architectures as well.

( We'll remove the untested, 7 years old !KEXEC complications from the file in a
  separate commit. )

Fixes: d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: qcom-scm: Fix QCOM_SCM configuration

[ Upstream commit 2954a6f12f250890ec2433cec03ba92784d613e8 ]

When CONFIG_QCOM_SCM is y and CONFIG_HAVE_ARM_SMCCC
is not set, compiling errors are encountered as follows:

drivers/firmware/qcom_scm-smc.o: In function `__scm_smc_do_quirk':
qcom_scm-smc.c:(.text+0x36): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call':
qcom_scm-legacy.c:(.text+0xe2): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call_atomic':
qcom_scm-legacy.c:(.text+0x1f0): undefined reference to `__arm_smccc_smc'

Note that __arm_smccc_smc is defined when HAVE_ARM_SMCCC is y.
So add dependency on HAVE_ARM_SMCCC in QCOM_SCM configuration.

Fixes: 916f743da354 ("firmware: qcom: scm: Move the scm driver to drivers/firmware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210406094200.60952-1-heying24@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: fix return value for unsupported ioctls

[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ]

Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.

Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.

Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.

Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: actually undefine superseded ASYNC flags

[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ]

Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.

Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.

Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: cdc-acm: fix unprivileged TIOCCSERIAL

[ Upstream commit dd5619582d60007139f0447382d2839f4f9e339b ]

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.

Fix the cdc-acm implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.

Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: r8a66597: Add missing null check on return from platform_get_resource

[ Upstream commit 9c2076090c2815fe7c49676df68dde7e60a9b9fc ]

The call to platform_get_resource can potentially return a NULL pointer
on failure, so add this check and return -EINVAL if it fails.

Fixes: c41442474a26 ("usb: gadget: R8A66597 peripheral controller support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference null return")
Link: https://lore.kernel.org/r/20210406184510.433497-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - Fix a double free in adf_create_ring

[ Upstream commit f7cae626cabb3350b23722b78fe34dd7a615ca04 ]

In adf_create_ring, if the callee adf_init_ring() failed, the callee will
free the ring->base_addr by dma_free_coherent() and return -EFAULT. Then
adf_create_ring will goto err and the ring->base_addr will be freed again
in adf_cleanup_ring().

My patch sets ring->base_addr to NULL after the first freed to avoid the
double free.

Fixes: a672a9dc872ec ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: greybus: uart: fix unprivileged TIOCCSERIAL

[ Upstream commit 60c6b305c11b5fd167ce5e2ce42f3a9098c388f0 ]

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.

Fix the greybus implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.

Fixes: e68453ed28c5 ("greybus: uart-gb: now builds, more framework added")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192u: Fix potential infinite loop

[ Upstream commit f9b9263a25dc3d2eaaa829e207434db6951ca7bc ]

The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of riv->ieee80211->LinkDetectInfo.SlotNum
that is a u16 type. There is a potential infinite loop if SlotNum
is larger than the u8 loop counter. Fix this by making the loop
counter the same type as SlotNum.

Addresses-Coverity: ("Infinite loop")
Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210407150308.496623-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init

[ Upstream commit 076de75de1e53160e9b099f75872c1f9adf41a0b ]

If the callee gpmi_alloc_dma_buffer() failed to alloc memory for
this->raw_buffer, gpmi_free_dma_buffer() will be called to free
this->auxiliary_virt. But this->auxiliary_virt is still a non-NULL
and valid ptr.

Then gpmi_alloc_dma_buffer() returns err and gpmi_free_dma_buffer()
is called again to free this->auxiliary_virt in err_out. This causes
a double free.

As gpmi_free_dma_buffer() has already called in gpmi_alloc_dma_buffer's
error path, so it should return err directly instead of releasing the dma
buffer again.

Fixes: 4d02423e9afe6 ("mtd: nand: gpmi: Fix gpmi_nand_init() error path")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210403060905.5251-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix error path in adf_isr_resource_alloc()

[ Upstream commit 83dc1173d73f80cbce2fee4d308f51f87b2f26ae ]

The function adf_isr_resource_alloc() is not unwinding correctly in case
of error.
This patch fixes the error paths and propagate the errors to the caller.

Fixes: 7afa232e76ce ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: qcom: Put child node before return

[ Upstream commit ac6ad7c2a862d682bb584a4bc904d89fa7721af8 ]

Put child node before return to fix potential reference count leak.
Generally, the reference count of child is incremented and decremented
automatically in the macro for_each_available_child_of_node() and should
be decremented manually if the loop is broken in loop body.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 335a12754808 ("bus: qcom: add EBI2 driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121114907.109267-1-bianpan2016@163.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: require write permissions for locking and badblock ioctls

[ Upstream commit 1e97743fd180981bef5f01402342bb54bf1c6366 ]

MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require
write permission. Depending on the hardware MEMLOCK might even be
write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK
is always write-once.

MEMSETBADBLOCK modifies the bad block table.

Fixes: f7e6b19bc764 ("mtd: properly check all write ioctls for permissions")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210303155735.25887-1-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Complete OUT requests on short packets

[ Upstream commit 75bb93be0027123b5db6cbcce89eb62f0f6b3c5b ]

A short packet indicates the end of a transfer and marks the request as
complete.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-8-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Don't DMA more than the buffer can take

[ Upstream commit 3e7c2510bdfe89a9ec223dd7acd6bfc8bb1cbeb6 ]

Before this, it wrote as much as available into the buffer, even if it
didn't fit.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-7-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Mask GRP2 interrupts we don't handle

[ Upstream commit 9aee3a23d6455200702f3a57e731fa11e8408667 ]

Currently it leaves unhandled interrupts unmasked, but those are never
acked. In the case of a "device idle" interrupt, this leads to an
effectively frozen system until plugging it in.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-5-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Remove a dubious condition leading to fotg210_done

[ Upstream commit c7f755b243494d6043aadcd9a2989cb157958b95 ]

When the EP0 IN request was not completed but less than a packet sent,
it would complete the request successfully. That doesn't make sense
and can't really happen as fotg210_start_dma always sends
min(length, maxpkt) bytes.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-4-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Fix EP0 IN requests bigger than two packets

[ Upstream commit 078ba935651e149c92c41161e0322e3372cc2705 ]

For a 134 Byte packet, it sends the first two 64 Byte packets just fine,
but then notice that less than a packet is remaining and call fotg210_done
without actually sending the rest.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-3-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Fix DMA on EP0 for length > max packet size

[ Upstream commit 755915fc28edfc608fa89a163014acb2f31c1e19 ]

For a 75 Byte request, it would send the first 64 separately, then detect
that the remaining 11 Byte fit into a single DMA, but due to this bug set
the length to the original 75 Bytes. This leads to a DMA failure (which is
ignored...) and the request completes without the remaining bytes having
been sent.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-2-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init

[ Upstream commit 8609f5cfdc872fc3a462efa6a3eca5cb1e2f6446 ]

ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.

[    7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[    7.180345] Call Trace:
[    7.182576]  mutex_lock+0xc9/0xd0
[    7.183257]  adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[    7.183541]  adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[    7.183834]  adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[    7.184127]  adf_probe+0x5e9/0x600 [qat_dh895xccvf]

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 25c6ffb249f6 ("crypto: qat - check if PF is running")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - don't release uninitialized resources

[ Upstream commit b66accaab3791e15ac99c92f236d0d3a6d5bd64e ]

adf_vf_isr_resource_alloc() is not unwinding correctly when error
happens and it want to release uninitialized resources.
To fix this, only release initialized resources.

[    1.792845] Trying to free already-free IRQ 11
[    1.793091] WARNING: CPU: 0 PID: 182 at kernel/irq/manage.c:1821 free_irq+0x202/0x380
[    1.801340] Call Trace:
[    1.801477]  adf_vf_isr_resource_free+0x32/0xb0 [intel_qat]
[    1.801785]  adf_vf_isr_resource_alloc+0x14d/0x150 [intel_qat]
[    1.802105]  adf_dev_init+0xba/0x140 [intel_qat]

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: dd0f368398ea ("crypto: qat - Add qat dh895xcc VF driver")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Check for DMA mapping error

[ Upstream commit 4a28d77e359009b846951b06f7c0d8eec8dce298 ]

DMA mapping might fail, we have to check it with dma_mapping_error().
Otherwise DMA-API is not happy:

  DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single]

Fixes: abab0c67c061 ("usb: pch_udc: Fixed issue which does not work with g_serial")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Check if driver is present before calling ->setup()

[ Upstream commit fbdbbe6d3ee502b3bdeb4f255196bb45003614be ]

Since we have a separate routine for VBUS sense, the interrupt may occur
before gadget driver is present. Hence, ->setup() call may oops the kernel:

[   55.245843] BUG: kernel NULL pointer dereference, address: 00000010
...
[   55.245843] EIP: pch_udc_isr.cold+0x162/0x33f
...
[   55.245843]  <IRQ>
[   55.245843]  ? pch_udc_svc_data_out+0x160/0x160

Check if driver is present before calling ->setup().

Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()

[ Upstream commit 91356fed6afd1c83bf0d3df1fc336d54e38f0458 ]

Either way ~0 will be in the correct byte order, hence
replace cpu_to_le32() by lower_32_bits(). Moreover,
it makes sparse happy, otherwise it complains:

.../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types)
.../pch_udc.c:1813:27:    expected unsigned int [usertype] dataptr
.../pch_udc.c:1813:27:    got restricted __le32 [usertype]

Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix incorrect characters on console

[ Upstream commit f264c6f6aece81a9f8fbdf912b20bd3feb476a7a ]

Incorrect characters are observed on console during boot. This issue occurs
when init/main.c is modifying termios settings to open /dev/console on the
rootfs.

This patch adds a waiting loop in set_termios to wait for TX shift register
empty (and TX FIFO if any) before stopping serial port.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Snow

[ Upstream commit 8987efbb17c2522be8615085df9a14da2ab53d34 ]

The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: c61248afa819 ("ARM: dts: Add max77686 RTC interrupt to cros5250-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250

[ Upstream commit f6368c60561370e4a92fac22982a3bd656172170 ]

The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: 47580e8d94c2 ("ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]

[ Upstream commit e004c3e67b6459c99285b18366a71af467d869f5 ]

Currently the array gpmc_cs is indexed by cs before it cs is range checked
and the pointer read from this out-of-index read is dereferenced. Fix this
by performing the range check on cs before the read and the following
pointer dereference.

Addresses-Coverity: ("Negative array index read")
Fixes: 9ed7a776eb50 ("ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210223193821.17232-1-colin.king@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Revert d3cb25a12138 completely

commit 50a318cc9b54a36f00beadf77e578a50f3620477 upstream.

The commit d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
obviously was not thought through and had made the situation even worse
than it was before. Two changes after almost reverted it. but a few
leftovers have been left as it. With this revert d3cb25a12138 completely.

While at it, narrow down the scope of unlocked section to prevent
potential race when prot_stall is assigned.

Fixes: d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
Fixes: 9903b6bedd38 ("usb: gadget: pch-udc: fix lock")
Fixes: 1d23d16a88e6 ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock")
Cc: Iago Abal <mail@iagoabal.eu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices

commit defce244b01ee12534910a4544e11be5eb927d25 upstream.

The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all.  That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.

Let's unify them with the single vendor-quirk entry.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries

commit f552ff54c2a700616a02b038e4bf3cbf859f65b7 upstream.

Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries

commit cab561f8d4bc9b196ae20c960aa5da89fd786ab5 upstream.

Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries

commit b7529c18feecb1af92f9db08c8e7fe446a82d96d upstream.

Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries

commit b265047ac56bad8c4f3d0c8bf9cb4e828ee0d28e upstream.

Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix copy of uninitialized variable back to userspace

commit 8dbc2ccac5a65c5b57e3070e36a3dc97c7970d96 upstream.

Currently the ioctl command RADEON_INFO_SI_BACKEND_ENABLED_MASK can
copy back uninitialised data in value_tmp that pointer *value points
to. This can occur when rdev->family is less than CHIP_BONAIRE and
less than CHIP_TAHITI.  Fix this by adding in a missing -EINVAL
so that no invalid value is copied back to userspace.

Addresses-Coverity: ("Uninitialized scalar variable)
Cc: stable@vger.kernel.org # 3.13+
Fixes: 439a1cfffe2c ("drm/radeon: expose render backend mask to the userspace")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: scan: drop entry from hidden_list on overflow

commit 010bfbe768f7ecc876ffba92db30432de4997e2a upstream.

If we overflow the maximum number of BSS entries and free the
new entry, drop it from any hidden_list that it may have been
added to in the code above or in cfg80211_combine_bsses().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210416094212.5de7d1676ad7.Ied283b0bc5f504845e7d6ab90626bdfa68bb3dc0@changeid
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()

commit 260a9ad9446723d4063ed802989758852809714d upstream.

The "ext->key_len" is a u16 that comes from the user.  If it's over
SCM_KEY_LEN (32) that could lead to memory corruption.

Fixes: e0d369d1d969 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YHaoA1i+8uT4ir4h@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: md_open returns -EBUSY when entering racing area

commit 6a4db2a60306eb65bfb14ccc9fde035b74a4b4e7 upstream.

commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.

This patch changes md_open returning from -ERESTARTSYS to -EBUSY, which
will break the infinitely retry when md_open enter racing area.

This patch is partly fix soft lockup issue, full fix needs mddev_find
is split into two functions: mddev_find & mddev_find_or_alloc. And
md_open should call new mddev_find (it only does searching job).

For more detail, please refer with Christoph's "split mddev_find" patch
in later commits.

*** env ***
kvm-qemu VM 2C1G with 2 iscsi luns
kernel should be non-preempt

*** script ***

about trigger every time with below script

```
1  node1="mdcluster1"
2  node2="mdcluster2"
3
4  mdadm -Ss
5  ssh ${node2} "mdadm -Ss"
6  wipefs -a /dev/sda /dev/sdb
7  mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda \
   /dev/sdb --assume-clean
8
9  for i in {1..10}; do
10    echo ==== $i ====;
11
12    echo "test  ...."
13    ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb"
14    sleep 1
15
16    echo "clean  ....."
17    ssh ${node2} "mdadm -Ss"
18 done
```

I use mdcluster env to trigger soft lockup, but it isn't mdcluster
speical bug. To stop md array in mdcluster env will do more jobs than
non-cluster array, which will leave enough time/gap to allow kernel to
run md_open.

*** stack ***

```
[  884.226509]  mddev_put+0x1c/0xe0 [md_mod]
[  884.226515]  md_open+0x3c/0xe0 [md_mod]
[  884.226518]  __blkdev_get+0x30d/0x710
[  884.226520]  ? bd_acquire+0xd0/0xd0
[  884.226522]  blkdev_get+0x14/0x30
[  884.226524]  do_dentry_open+0x204/0x3a0
[  884.226531]  path_openat+0x2fc/0x1520
[  884.226534]  ? seq_printf+0x4e/0x70
[  884.226536]  do_filp_open+0x9b/0x110
[  884.226542]  ? md_release+0x20/0x20 [md_mod]
[  884.226543]  ? seq_read+0x1d8/0x3e0
[  884.226545]  ? kmem_cache_alloc+0x18a/0x270
[  884.226547]  ? do_sys_open+0x1bd/0x260
[  884.226548]  do_sys_open+0x1bd/0x260
[  884.226551]  do_syscall_64+0x5b/0x1e0
[  884.226554]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
```

*** rootcause ***

"mdadm -A" (or other array assemble commands) will start a daemon "mdadm
--monitor" by default. When "mdadm -Ss" is running, the stop action will
wakeup "mdadm --monitor". The "--monitor" daemon will immediately get
info from /proc/mdstat. This time mddev in kernel still exist, so
/proc/mdstat still show md device, which makes "mdadm --monitor" to open
/dev/md0.

The previously "mdadm -Ss" is removing action, the "mdadm --monitor"
open action will trigger md_open which is creating action. Racing is
happening.

```
<thread 1>: "mdadm -Ss"
md_release
  mddev_put deletes mddev from all_mddevs
  queue_work for mddev_delayed_delete
  at this time, "/dev/md0" is still available for opening

<thread 2>: "mdadm --monitor ..."
md_open
 + mddev_find can't find mddev of /dev/md0, and create a new mddev and
 |    return.
 + trigger "if (mddev->gendisk != bdev->bd_disk)" and return
      -ERESTARTSYS.
```

In non-preempt kernel, <thread 2> is occupying on current CPU. and
mddev_delayed_delete which was created in <thread 1> also can't be
schedule.

In preempt kernel, it can also trigger above racing. But kernel doesn't
allow one thread running on a CPU all the time. after <thread 2> running
some time, the later "mdadm -A" (refer above script line 13) will call
md_alloc to alloc a new gendisk for mddev. it will break md_open
statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller,
the soft lockup is broken.

Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: factor out a mddev_find_locked helper from mddev_find

commit 8b57251f9a91f5e5a599de7549915d2d226cc3af upstream.

Factor out a self-contained helper to just lookup a mddev by the dev_t
"unit".

Cc: stable@vger.kernel.org
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md-cluster: fix use-after-free issue when removing rdev

commit f7c7a2f9a23e5b6e0f5251f29648d0238bb7757e upstream.

md_kick_rdev_from_array will remove rdev, so we should
use rdev_for_each_safe to search list.

How to trigger:

env: Two nodes on kvm-qemu x86_64 VMs (2C2G with 2 iscsi luns).

```
node2=192.168.0.3

for i in {1..20}; do
    echo ==== $i `date` ====;

    mdadm -Ss && ssh ${node2} "mdadm -Ss"
    wipefs -a /dev/sda /dev/sdb

    mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l 1 /dev/sda \
       /dev/sdb --assume-clean
    ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb"
    mdadm --wait /dev/md0
    ssh ${node2} "mdadm --wait /dev/md0"

    mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda
    sleep 1
done
```

Crash stack:

```
stack segment: 0000 [#1] SMP
... ...
RIP: 0010:md_check_recovery+0x1e8/0x570 [md_mod]
... ...
RSP: 0018:ffffb149807a7d68 EFLAGS: 00010207
RAX: 0000000000000000 RBX: ffff9d494c180800 RCX: ffff9d490fc01e50
RDX: fffff047c0ed8308 RSI: 0000000000000246 RDI: 0000000000000246
RBP: 6b6b6b6b6b6b6b6b R08: ffff9d490fc01e40 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: ffff9d494c180818 R14: ffff9d493399ef38 R15: ffff9d4933a1d800
FS:  0000000000000000(0000) GS:ffff9d494f700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe68cab9010 CR3: 000000004c6be001 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 raid1d+0x5c/0xd40 [raid1]
 ? finish_task_switch+0x75/0x2a0
 ? lock_timer_base+0x67/0x80
 ? try_to_del_timer_sync+0x4d/0x80
 ? del_timer_sync+0x41/0x50
 ? schedule_timeout+0x254/0x2d0
 ? md_start_sync+0xe0/0xe0 [md_mod]
 ? md_thread+0x127/0x160 [md_mod]
 md_thread+0x127/0x160 [md_mod]
 ? wait_woken+0x80/0x80
 kthread+0x10d/0x130
 ? kthread_park+0xa0/0xa0
 ret_from_fork+0x1f/0x40
```

Fixes: dbb64f8635f5d ("md-cluster: Fix adding of new disk with new reload code")
Fixes: 659b254fa7392 ("md-cluster: remove a disk asynchronously from cluster environment")
Cc: stable@vger.kernel.org
Reviewed-by: Gang He <ghe@suse.com>
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Restructure trace_clock_global() to never block

commit aafe104aa9096827a429bc1358f8260ee565b7cc upstream.

It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:

Call Trace:
 trace_clock_global+0x91/0xa0
 __rb_reserve_next+0x237/0x460
 ring_buffer_lock_reserve+0x12a/0x3f0
 trace_buffer_lock_reserve+0x10/0x50
 __trace_graph_return+0x1f/0x80
 trace_graph_return+0xb7/0xf0
 ? trace_clock_global+0x91/0xa0
 ftrace_return_to_handler+0x8b/0xf0
 ? pv_hash+0xa0/0xa0
 return_to_handler+0x15/0x30
 ? ftrace_graph_caller+0xa0/0xa0
 ? trace_clock_global+0x91/0xa0
 ? __rb_reserve_next+0x237/0x460
 ? ring_buffer_lock_reserve+0x12a/0x3f0
 ? trace_event_buffer_lock_reserve+0x3c/0x120
 ? trace_event_buffer_reserve+0x6b/0xc0
 ? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
 ? dpm_run_callback+0x3b/0xc0
 ? pm_ops_is_empty+0x50/0x50
 ? platform_get_irq_byname_optional+0x90/0x90
 ? trace_device_pm_callback_start+0x82/0xd0
 ? dpm_run_callback+0x49/0xc0

With the following RIP:

RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200

Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:

ring_buffer_lock_reserve() {
  trace_clock_global() {
    arch_spin_lock() {
      queued_spin_lock_slowpath() {
        /* lock taken */
        (something else gets traced by function graph tracer)
          ring_buffer_lock_reserve() {
            trace_clock_global() {
              arch_spin_lock() {
                queued_spin_lock_slowpath() {
                /* DEAD LOCK! */

Tracing should *never* block, as it can lead to strange lockups like the
above.

Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.

Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home
Cc: stable@vger.kernel.org
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem
Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Map all PIDs to command lines

commit 785e3c0a3a870e72dc530856136ab4c8dd207128 upstream.

The default max PID is set by PID_MAX_DEFAULT, and the tracing
infrastructure uses this number to map PIDs to the comm names of the
tasks, such output of the trace can show names from the recorded PIDs in
the ring buffer. This mapping is also exported to user space via the
"saved_cmdlines" file in the tracefs directory.

But currently the mapping expects the PIDs to be less than
PID_MAX_DEFAULT, which is the default maximum and not the real maximum.
Recently, systemd will increases the maximum value of a PID on the system,
and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its
comm is not recorded. This leads to the entire trace to have "<...>" as
the comm name, which is pretty useless.

Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead
of just mapping the index to the comm, map a mask of the PID
(PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the
map_cmdline_to_pid array (that already exists).

This bug goes back to the beginning of ftrace, but hasn't been an issue
until user space started increasing the maximum value of PIDs.

Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()

commit e09e28671cda63e6308b31798b997639120e2a21 upstream.

Strcpy is inherently not safe, and strlcpy() should be used instead.
__trace_find_cmdline() uses strcpy() because the comms saved must have a
terminating nul character, but it doesn't hurt to add the extra protection
of using strlcpy() instead of strcpy().

Link: http://lkml.kernel.org/r/1493806274-13936-1-git-send-email-amit.pundir@linaro.org
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
[AmitP: Cherry-picked this commit from CodeAurora kernel/msm-3.10
https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=2161ae9a70b12cf18ac8e5952a20161ffbccb477]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
[ Updated change log and removed the "- 1" from len parameter ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Treat recording comm for idle task as a success

commit eaf260ac04d9b4cf9f458d5c97555bfff2da526e upstream.

Currently we stop recording comm for non-idle tasks when switching from/to idle
task since we treat that as a record failure. Fix that by treat recording of
comm for idle task as a success.

Link: http://lkml.kernel.org/r/20170706230023.17942-1-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: vmw_vmci: explicitly initialize vmci_datagram payload

commit b2192cfeba8481224da0a4ec3b4a7ccd80b1623b upstream.

KMSAN complains that vmci_check_host_caps() left the payload part of
check_msg uninitialized.

  =====================================================
  BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
  CPU: 1 PID: 1 Comm: swapper/0 Tainted: G    B             5.11.0-rc7+ #4
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
  Call Trace:
   dump_stack+0x21c/0x280
   kmsan_report+0xfb/0x1e0
   kmsan_internal_check_memory+0x202/0x520
   kmsan_check_memory+0xd/0x10
   iowrite8_rep+0x86/0x380
   vmci_guest_probe_device+0xf0b/0x1e70
   pci_device_probe+0xab3/0xe70
   really_probe+0xd16/0x24d0
   driver_probe_device+0x29d/0x3a0
   device_driver_attach+0x25a/0x490
   __driver_attach+0x78c/0x840
   bus_for_each_dev+0x210/0x340
   driver_attach+0x89/0xb0
   bus_add_driver+0x677/0xc40
   driver_register+0x485/0x8e0
   __pci_register_driver+0x1ff/0x350
   vmci_guest_init+0x3e/0x41
   vmci_drv_init+0x1d6/0x43f
   do_one_initcall+0x39c/0x9a0
   do_initcall_level+0x1d7/0x259
   do_initcalls+0x127/0x1cb
   do_basic_setup+0x33/0x36
   kernel_init_freeable+0x29a/0x3ed
   kernel_init+0x1f/0x840
   ret_from_fork+0x1f/0x30

  Uninit was created at:
   kmsan_internal_poison_shadow+0x5c/0xf0
   kmsan_slab_alloc+0x8d/0xe0
   kmem_cache_alloc+0x84f/0xe30
   vmci_guest_probe_device+0xd11/0x1e70
   pci_device_probe+0xab3/0xe70
   really_probe+0xd16/0x24d0
   driver_probe_device+0x29d/0x3a0
   device_driver_attach+0x25a/0x490
   __driver_attach+0x78c/0x840
   bus_for_each_dev+0x210/0x340
   driver_attach+0x89/0xb0
   bus_add_driver+0x677/0xc40
   driver_register+0x485/0x8e0
   __pci_register_driver+0x1ff/0x350
   vmci_guest_init+0x3e/0x41
   vmci_drv_init+0x1d6/0x43f
   do_one_initcall+0x39c/0x9a0
   do_initcall_level+0x1d7/0x259
   do_initcalls+0x127/0x1cb
   do_basic_setup+0x33/0x36
   kernel_init_freeable+0x29a/0x3ed
   kernel_init+0x1f/0x840
   ret_from_fork+0x1f/0x30

  Bytes 28-31 of 36 are uninitialized
  Memory access of size 36 starts at ffff8881675e5f00
  =====================================================

Fixes: 1f166439917b69d3 ("VMCI: guest side driver implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-2-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct

commit 376565b9717c30cd58ad33860fa42697615fa2e4 upstream.

KMSAN complains that the vmci_use_ppn64() == false path in
vmci_dbell_register_notification_bitmap() left upper 32bits of
bitmap_set_msg.bitmap_ppn64 member uninitialized.

  =====================================================
  BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
  CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc7+ #4
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
  Call Trace:
   dump_stack+0x21c/0x280
   kmsan_report+0xfb/0x1e0
   kmsan_internal_check_memory+0x484/0x520
   kmsan_check_memory+0xd/0x10
   iowrite8_rep+0x86/0x380
   vmci_send_datagram+0x150/0x280
   vmci_dbell_register_notification_bitmap+0x133/0x1e0
   vmci_guest_probe_device+0xcab/0x1e70
   pci_device_probe+0xab3/0xe70
   really_probe+0xd16/0x24d0
   driver_probe_device+0x29d/0x3a0
   device_driver_attach+0x25a/0x490
   __driver_attach+0x78c/0x840
   bus_for_each_dev+0x210/0x340
   driver_attach+0x89/0xb0
   bus_add_driver+0x677/0xc40
   driver_register+0x485/0x8e0
   __pci_register_driver+0x1ff/0x350
   vmci_guest_init+0x3e/0x41
   vmci_drv_init+0x1d6/0x43f
   do_one_initcall+0x39c/0x9a0
   do_initcall_level+0x1d7/0x259
   do_initcalls+0x127/0x1cb
   do_basic_setup+0x33/0x36
   kernel_init_freeable+0x29a/0x3ed
   kernel_init+0x1f/0x840
   ret_from_fork+0x1f/0x30

  Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at:
   vmci_dbell_register_notification_bitmap+0x50/0x1e0
   vmci_dbell_register_notification_bitmap+0x50/0x1e0

  Bytes 28-31 of 32 are uninitialized
  Memory access of size 32 starts at ffff88810098f570
  =====================================================

Fixes: 83e2ec765be03e8a ("VMCI: doorbell implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: lis3lv02d: Fix false-positive WARN on various HP models

commit 3641762c1c9c7cfd84a7061a0a73054f09b412e3 upstream.

Before this commit lis3lv02d_get_pwron_wait() had a WARN_ONCE() to catch
a potential divide by 0. WARN macros should only be used to catch internal
kernel bugs and that is not the case here. We have been receiving a lot of
bug reports about kernel backtraces caused by this WARN.

The div value being checked comes from the lis3->odrs[] array. Which
is sized to be a power-of-2 matching the number of bits in lis3->odr_mask.

The only lis3 model where this array is not entirely filled with non zero
values. IOW the only model where we can hit the div == 0 check is the
3dc ("8 bits 3DC sensor") model:

int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};

Note the 0 value at index 0, according to the datasheet an odr index of 0
means "Power-down mode". HP typically uses a lis3 accelerometer for HDD
fall protection. What I believe is happening here is that on newer
HP devices, which only contain a SDD, the BIOS is leaving the lis3 device
powered-down since it is not used for HDD fall protection.

Note that the lis3_3dc_rates array initializer only specifies 10 values,
which matches the datasheet. So it also contains 6 zero values at the end.

Replace the WARN with a normal check, which treats an odr index of 0
as power-down and uses a normal dev_err() to report the error in case
odr index point past the initialized part of the array.

Fixes: 1510dd5954be ("lis3lv02d: avoid divide by zero due to unchecked")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=785814
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1817027
BugLink: https://bugs.centos.org/view.php?id=10720
Link: https://lore.kernel.org/r/20210217102501.31758-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR

commit f626ca682912fab55dff15469ce893ae16b65c7e upstream.

Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.

For those systems the PCI BARs that request a mapping in the I/O space
have the length recorded in the corresponding PCI resource set to zero,
which makes it unassigned:

# lspci -s 0031:02:04.0 -v
0031:02:04.0 FDDI network controller: Digital Equipment Corporation PCI-to-PDQ Interface Chip [PFI] FDDI (DEFPA) (rev 02)
Subsystem: Digital Equipment Corporation FDDIcontroller/PCI (DEFPA)
Flags: bus master, medium devsel, latency 136, IRQ 57, NUMA node 8
Memory at 620c080020000 (32-bit, non-prefetchable) [size=128]
I/O ports at <unassigned> [disabled]
Memory at 620c080030000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Kernel driver in use: defxx
Kernel modules: defxx

#

Regardless the driver goes ahead and requests it (here observed with a
Raptor Talos II POWER9 system), resulting in an odd /proc/ioport entry:

# cat /proc/ioports
00000000-ffffffffffffffff : 0031:02:04.0
#

Furthermore, the system gets confused as the driver actually continues
and pokes at those locations, causing a flood of messages being output
to the system console by the underlying system firmware, like:

defxx: v1.11 2014/07/01  Lawrence V. Stefani and others
defxx 0031:02:04.0: enabling device (0140 -> 0142)
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010000
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event

and so on and so on (possibly intermixed actually, as there's no locking
between the kernel and the firmware in console port access with this
particular system, but cleaned up above for clarity), and once some 10k
of such pairs of the latter two messages have been produced an interace
eventually shows up in a useless state:

0031:02:04.0: DEFPA at I/O addr = 0x0, IRQ = 57, Hardware addr = 00-00-00-00-00-00

This was not expected to happen as resource handling was added to the
driver a while ago, because it was not known at that time that a PCI
system would be possible that cannot assign port I/O resources, and
oddly enough `request_region' does not fail, which would have caught it.

Correct the problem then by checking for the length of zero for the CSR
resource and bail out gracefully refusing to register an interface if
that turns out to be the case, producing messages like:

defxx: v1.11 2014/07/01  Lawrence V. Stefani and others
0031:02:04.0: Cannot use I/O, no address set, aborting
0031:02:04.0: Recompile driver with "CONFIG_DEFXX_MMIO=y"

Keep the original check for the EISA MMIO resource as implemented,
because in that case the length is hardwired to 0x400 as a consequence
of how the compare/mask address decoding works in the ESIC chip and it
is only the base address that is set to zero if MMIO has been disabled
for the adapter in EISA configuration, which in turn could be a valid
bus address in a legacy-free system implementing PCI, especially for
port I/O.

Where the EISA MMIO resource has been disabled for the adapter in EISA
configuration this arrangement keeps producing messages like:

eisa 00:05: EISA: slot 5: DEC3002 detected
defxx: v1.11 2014/07/01  Lawrence V. Stefani and others
00:05: Cannot use MMIO, no address set, aborting
00:05: Recompile driver with "CONFIG_DEFXX_MMIO=n"
00:05: Or run ECU and set adapter's MMIO location

with the last two lines now swapped for easier handling in the driver.

There is no need to check for and catch the case of a port I/O resource
not having been assigned for EISA as the adapter uses the slot-specific
I/O space, which gets assigned by how EISA has been specified and maps
directly to the particular slot an option card has been placed in.  And
the EISA variant of the adapter has additional registers that are only
accessible via the port I/O space anyway.

While at it factor out the error message calls into helpers and fix an
argument order bug with the `pr_err' call now in `dfx_register_res_err'.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4d0438e56a8f ("defxx: Clean up DEFEA resource management")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/nfc: fix use-after-free llcp_sock_bind/connect

commit c61760e6940dd4039a7f5e84a6afc9cdbf4d82b6 upstream.

Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()")
and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
fixed a refcount leak bug in bind/connect but introduced a
use-after-free if the same local is assigned to 2 different sockets.

This can be triggered by the following simple program:
    int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
    int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
    memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) );
    addr.sa_family = AF_NFC;
    addr.nfc_protocol = NFC_PROTO_NFC_DEP;
    bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
    bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
    close(sock1);
    close(sock2);

Fix this by assigning NULL to llcp_sock->local after calling
nfc_llcp_local_put.

This addresses CVE-2021-23134.

Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Reported-by: Nadav Markus <nmarkus@paloaltonetworks.com>
Fixes: c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bluetooth: eliminate the potential race condition when removing the HCI controller

commit e2cb6b891ad2b8caa9131e3be70f45243df82a80 upstream.

There is a possible race condition vulnerability between issuing a HCI
command and removing the cont.  Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:

thread-A in hci_req_sync()      |   thread-B in hci_dev_do_close()
                                |   hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
...                             |   test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev);        |
                                |
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hsr: use netdev_err() instead of WARN_ONCE()

commit 4b793acdca0050739b99ace6a8b9e7f717f57c6b upstream.

When HSR interface is sending a frame, it finds a node with
the destination ethernet address from the list.
If there is no node, it calls WARN_ONCE().
But, using WARN_ONCE() for this situation is a little bit overdoing.
So, in this patch, the netdev_err() is used instead.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: verify AMP hci_chan before amp_destroy

commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream.

hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().

This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().

Example crash call trace:
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe3/0x144 lib/dump_stack.c:118
 print_address_description+0x67/0x22a mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report mm/kasan/report.c:412 [inline]
 kasan_report+0x251/0x28f mm/kasan/report.c:396
 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
 l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
 l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
 hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Allocated by task 38:
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
 kmalloc include/linux/slab.h:515 [inline]
 kzalloc include/linux/slab.h:709 [inline]
 hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
 l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
 hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Freed by task 1732:
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free mm/kasan/kasan.c:521 [inline]
 __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
 slab_free mm/slub.c:3009 [inline]
 kfree+0x182/0x21e mm/slub.c:3972
 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
 hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

The buggy address belongs to the object at ffff8881d7af9180
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
 128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails

commit 8e947c8f4a5620df77e43c9c75310dc510250166 upstream.

When loading a device-mapper table for a request-based mapped device,
and the allocation/initialization of the blk_mq_tag_set for the device
fails, a following device remove will cause a double free.

E.g. (dmesg):
  device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device
  device-mapper: ioctl: unable to set up device queue for new table.
  Unable to handle kernel pointer dereference in virtual kernel address space
  Failing address: 0305e098835de000 TEID: 0305e098835de803
  Fault in home space mode while using kernel ASCE.
  AS:000000025efe0007 R3:0000000000000024
  Oops: 0038 ilc:3 [#1] SMP
  Modules linked in: ... lots of modules ...
  Supported: Yes, External
  CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G        W      X    5.3.18-53-default #1 SLE15-SP3
  Hardware name: IBM 8561 T01 7I2 (LPAR)
  Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330)
             R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
  Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000
             000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000
             000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640
             00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8
  Krnl Code: 000000025e368eb8: c4180041e100       lgrl    %r1,25eba50b8
             000000025e368ebe: ecba06b93a55       risbg   %r11,%r10,6,185,58
            #000000025e368ec4: e3b010000008       ag      %r11,0(%r1)
            >000000025e368eca: e310b0080004       lg      %r1,8(%r11)
             000000025e368ed0: a7110001           tmll    %r1,1
             000000025e368ed4: a7740129           brc     7,25e369126
             000000025e368ed8: e320b0080004       lg      %r2,8(%r11)
             000000025e368ede: b904001b           lgr     %r1,%r11
  Call Trace:
   [<000000025e368eca>] kfree+0x42/0x330
   [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8
   [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod]
   [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod]
   [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod]
   [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod]
   [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod]
   [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod]
   [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0
   [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40
   [<000000025e8c15ac>] system_call+0xd8/0x2c8
  Last Breaking-Event-Address:
   [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8
  Kernel panic - not syncing: Fatal exception: panic_on_oops

When allocation/initialization of the blk_mq_tag_set fails in
dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer
is not reset to NULL; so when dev_remove() later gets into
dm_mq_cleanup_mapped_device() it sees the pointer and tries to
uninitialize and free it again.

Fix this by setting the pointer to NULL in dm_mq_init_request_queue()
error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().

Cc: <stable@vger.kernel.org> # 4.6+
Fixes: 1c357a1e86a4 ("dm: allocate blk_mq_tag_set rather than embed in mapped_device")
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm space map common: fix division bug in sm_ll_find_free_block()

commit 5208692e80a1f3c8ce2063a22b675dd5589d1d80 upstream.

This division bug meant the search for free metadata space could skip
the final allocation bitmap's worth of entries. Fix affects DM thinp,
cache and era targets.

Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Tested-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm persistent data: packed struct should have an aligned() attribute too

commit a88b2358f1da2c9f9fcc432f2e0a79617fea397c upstream.

Otherwise most non-x86 architectures (e.g. riscv, arm) will resort to
byte-by-byte access.

Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget/function/f_fs string table fix for multiple languages

commit 55b74ce7d2ce0b0058f3e08cab185a0afacfe39e upstream.

Fixes bug with the handling of more than one language in
the string table in f_fs.c.
str_count was not reset for subsequent language codes.
str_count-- "rolls under" and processes u32 max strings on
the processing of the second language entry.
The existing bug can be reproduced by adding a second language table
to the structure "strings" in tools/usb/ffs-test.c.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Link: https://lore.kernel.org/r/20210317224109.21534-1-dean@sensoray.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: Fix double free of device descriptor pointers

commit 43c4cab006f55b6ca549dd1214e22f5965a8675f upstream.

Upon driver unbind usb_free_all_descriptors() function frees all
speed descriptor pointers without setting them to NULL. In case
gadget speed changes (i.e from super speed plus to super speed)
after driver unbind only upto super speed descriptor pointers get
populated. Super speed plus desc still holds the stale (already
freed) pointer. Fix this issue by setting all descriptor pointers
to NULL after freeing them in usb_free_all_descriptors().

Fixes: f5c61225cf29 ("usb: gadget: Update function for SuperSpeedPlus")
cc: stable@vger.kernel.org
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1619034452-17334-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>