sh: Fix up DSP context save/restore.

There were a number of issues with the DSP context save/restore code,
mostly left-over relics from when it was introduced on SH3-DSP with
little follow-up testing, resulting in things like task_pt_dspregs()
referencing incorrect state on the stack.

This follows the MIPS convention of tracking the DSP state in the
thread_struct and handling the state save/restore in switch_to() and
finish_arch_switch() respectively. The regset interface is also updated,
which allows us to finally be rid of task_pt_dspregs() and the special
cased task_pt_regs().

Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Fix up number of on-chip DMA channels on SH7091.

This accidentally regressed when the multi-IRQ changes went in,
switching SH7091 from 4 to 6 channels. Add SH7091 back in to the
4-channel dependency list.

Reported-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: update defconfigs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Kill off broken direct-mapped cache mode.

Forcing direct-mapped worked on certain older 2-way set associative
parts, but was always error prone on 4-way parts. As these are the
norm these days, there is not much point in continuing to support this
mode. Most of the folks that used direct-mapped mode generally just
wanted writethrough caching in the first place..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.

cpuidle wants ARCH_HAS_DEFAULT_IDLE defined in order to use the
default idle loop. So, make it accessible and enable it for all
sh machines.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Add a command line option for disabling I/O trapping.

This adds a 'noiotrap' kernel command line option to permit disabling of
I/O trapping. This is mostly useful for running on emulators where the
physical device limitations are not an issue.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Select ARCH_HIBERNATION_POSSIBLE.

Now that the requisite patches have gone in, this can safely be enabled
across the board for all of the 32-bit SH platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: migor: Fix up CEU use flags.

Follows the same change as per ap325rxa, which was inadvertently omitted.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

input: migor_ts: add wakeup support

Add wakeup support to the migor_ts driver. If user space has enabled
wakeup, use set_irq_wake() during suspend and resume. With this patch
the migor_ts driver can be used to wake the system from suspend.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

rtc: rtc-sh: use set_irq_wake()

Modify the sh_rtc driver to use set_irq_wake() during suspend
and resume. These functions are used to enable the rtc interrupts
in the interrupt controller so the rtc can be used to wakeup the
system from suspend.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

input: sh_keysc: use enable/disable_irq_wake()

Modify the sh_keysc driver to use enable/disable_irq_wake()
during suspend and resume. These functions are used to enable
the sh_keysc interrupt in the interrupt controller so the
keypad can be used to wakeup the system from suspend.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: intc: set_irq_wake() support

Add set_irq_wake() support to intc using sysdev and suspend.

The intc controllers are put on a list at registration time
and registered as sysdev devices later on during the boot.

The sysdev class suspend callback is used to find irqs with
wakeup enabled belonging to our intc controller. Such irqs
are simply enabled so wakeup interrupts may reach the cpu.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: intc: install enable, disable and shutdown callbacks

Modify the intc code to install a disable callback. The current
solution without a disable callback results in use of the
generic default_disable() function. This function is a no-op
so suspend_device_irqs() will not disable any intc interrupts
at suspend time without this patch. Also, install enable and
shutdown callbacks while at it.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

clocksource: sh_cmt: use remove_irq() and remove clockevent workaround

Update the sh_cmt driver to make use of recent irq and clockevent changes:
 - use remove_irq() together with setup_irq()
 - remove mult workaround since WARN_ON() now has been moved

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6

serial: fixup /proc/tty/driver/serial after proc_fops conversion

"struct tty_driver *" lies in m->private not in v which is
SEQ_TOKEN_START which is 1 which is enough to trigger NULL dereference
next line:

BUG: unable to handle kernel NULL pointer dereference at 000000ad
IP: [<c040d689>] uart_proc_show+0xe/0x2b0

Noticed by Linus.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (29 commits)
  [IA64] BUG to BUG_ON changes
  [IA64] Fix typo/thinko in arch/ia64/sn/kernel/sn2/sn2_smp.c
  ia64: remove some warnings.
  ia64/xen: fix the link error.
  ia64/pv_ops/bp/xen: implemented binary patchable pv_cpu_ops.
  ia64/pv_ops/binary patch: define paravirt_dv_serialize_data() and suppress false positive warning.
  ia64/pv_ops/bp/module: support binary patching for kernel module.
  ia64/pv_ops: implement binary patching optimization for native.
  ia64/pv_op/binarypatch: add helper functions to support binary patching for paravirt_ops.
  ia64/pv_ops/xen/gate.S: xen gate page paravirtualization
  ia64/pv_ops: paravirtualize gate.S.
  ia64/pv_ops: move down __kernel_syscall_via_epc.
  ia64/pv_ops/xen: define xen specific gate page.
  ia64/pv_ops: gate page paravirtualization.
  ia64/pv_ops/xen/pv_time_ops: implement sched_clock.
  ia64/pv_ops/pv_time_ops: add sched_clock hook.
  ia64/pv_ops/xen: paravirtualize read/write ar.itc and ar.itm
  ia64/pv_ops: paravirtualize mov = ar.itc.
  ia64/pv_ops/pvchecker: support mov = ar.itc paravirtualization
  ia64/pv_ops: paravirtualize fsys.S.
  ...

Merge branch 'x86-setup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: guard against pre-ACPI 3 e820 code not updating %ecx

qeth: properly delete empty files.

Commit 64ef8957986f6a04f61e7c95fa6ffeb3a86a6661 ("qeth: remove EDDP")
removed the qeth_core_offl.[hc] files, but ended up doing so by just
patching them to zero size, rather than removing them properly.

Actually remove the files.

Reported-by: Andrew Price <andy@andrewprice.me.uk>
Cc: Frank Blaschka <frank.blaschka@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86, setup: guard against pre-ACPI 3 e820 code not updating %ecx

Impact: BIOS bug safety

For pre-ACPI 3 BIOSes, pre-initialize the end of the e820 buffer just
in case the BIOS returns an unchanged %ecx but without actually
touching the ACPI 3 extended flags field.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Merge branch 'x86/setup' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86/setup' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: ACPI 3, BIOS workaround for E820-probing code
  x86, setup: preemptively save/restore edi and ebp around INT 15 E820
  x86, setup: mark %esi as clobbered in E820 BIOS call

Merge branch 'for-linus' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'for-linus' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (58 commits)
  SUNRPC: Ensure IPV6_V6ONLY is set on the socket before binding to a port
  NSM: Fix unaligned accesses in nsm_init_private()
  NFS: Simplify logic to compare socket addresses in client.c
  NFS: Start PF_INET6 callback listener only if IPv6 support is available
  lockd: Start PF_INET6 listener only if IPv6 support is available
  SUNRPC: Remove CONFIG_SUNRPC_REGISTER_V4
  SUNRPC: rpcb_register() should handle errors silently
  SUNRPC: Simplify kernel RPC service registration
  SUNRPC: Simplify svc_unregister()
  SUNRPC: Allow callers to pass rpcb_v4_register a NULL address
  SUNRPC: rpcbind actually interprets r_owner string
  SUNRPC: Clean up address type casts in rpcb_v4_register()
  SUNRPC: Don't return EPROTONOSUPPORT in svc_register()'s helpers
  SUNRPC: Use IPv4 loopback for registering AF_INET6 kernel RPC services
  SUNRPC: Set IPV6ONLY flag on PF_INET6 RPC listener sockets
  NFS: Revert creation of IPv6 listeners for lockd and NFSv4 callbacks
  SUNRPC: Remove @family argument from svc_create() and svc_create_pooled()
  SUNRPC: Change svc_create_xprt() to take a @family argument
  SUNRPC: svc_setup_socket() gets protocol family from socket
  SUNRPC: Pass a family argument to svc_register()
  ...

Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
  ext4: Regularize mount options
  ext4: fix locking typo in mballoc which could cause soft lockup hangs
  ext4: fix typo which causes a memory leak on error path
  jbd2: Update locking coments
  ext4: Rename pa_linear to pa_type
  ext4: add checks of block references for non-extent inodes
  ext4: Check for an valid i_mode when reading the inode from disk
  ext4: Use WRITE_SYNC for commits which are caused by fsync()
  ext4: Add auto_da_alloc mount option
  ext4: Use struct flex_groups to calculate get_orlov_stats()
  ext4: Use atomic_t's in struct flex_groups
  ext4: remove /proc tuning knobs
  ext4: Add sysfs support
  ext4: Track lifetime disk writes
  ext4: Fix discard of inode prealloc space with delayed allocation.
  ext4: Automatically allocate delay allocated blocks on rename
  ext4: Automatically allocate delay allocated blocks on close
  ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl
  ext4: Simplify delalloc code by removing mpage_da_writepages()
  ext4: Save stack space by removing fake buffer heads
  ...

Merge branch 'devel' into for-linus

SUNRPC: Ensure IPV6_V6ONLY is set on the socket before binding to a port

Also ensure that we use the protocol family instead of the address
family when calling sock_create_kern().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NSM: Fix unaligned accesses in nsm_init_private()

This fixes unaligned accesses in nsm_init_private() when
creating nlm_reboot keys.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: try to free metadata pages when we free btree blocks
  Btrfs: add extra flushing for renames and truncates
  Btrfs: make sure btrfs_update_delayed_ref doesn't increase ref_mod
  Btrfs: optimize fsyncs on old files
  Btrfs: tree logging unlink/rename fixes
  Btrfs: Make sure i_nlink doesn't hit zero too soon during log replay
  Btrfs: limit balancing work while flushing delayed refs
  Btrfs: readahead checksums during btrfs_finish_ordered_io
  Btrfs: leave btree locks spinning more often
  Btrfs: Only let very young transactions grow during commit
  Btrfs: Check for a blocking lock before taking the spin
  Btrfs: reduce stack in cow_file_range
  Btrfs: reduce stalls during transaction commit
  Btrfs: process the delayed reference queue in clusters
  Btrfs: try to cleanup delayed refs while freeing extents
  Btrfs: reduce stack usage in some crucial tree balancing functions
  Btrfs: do extent allocation and reference count updates in the background
  Btrfs: don't preallocate metadata blocks during btrfs_search_slot

Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (59 commits)
  ide-floppy: do not complete rq's prematurely
  ide: be able to build pmac driver without IDE built-in
  ide-pmac: IDE cable detection on Apple PowerBook
  ide: inline SELECT_DRIVE()
  ide: turn selectproc() method into dev_select() method (take 5)
  MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS (take 2)
  ide: move data register access out of tf_{read|load}() methods (take 2)
  ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2)
  ide-io-std: shorten ide_{in|out}put_data()
  ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  ide: turn set_irq() method into write_devctl() method
  ide: use ATA_HOB
  ide-disk: use ATA_ERR
  ide: add support for CFA specified transfer modes (take 3)
  ide-iops: only clear DMA words on setting DMA mode
  ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  au1xxx-ide: auide_{in|out}sw() should be static
  ide-floppy: use ide_pio_bytes()
  ide-{floppy,tape}: fix padding for PIO transfers
  ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  ...

[IA64] BUG to BUG_ON changes

Replace:

if (test)
BUG();

with
BUG_ON(test);

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt

[IA64] Fix typo/thinko in arch/ia64/sn/kernel/sn2/sn2_smp.c

sn2_ptc_init() has what looks like a cut-n-paste error. Fix it.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: online_store - trigger recognition for boxed devices
  [S390] cio: disallow online setting of device in transient state
  [S390] cio: introduce notifier for boxed state
  [S390] cio: introduce ccw_device_schedule_sch_unregister
  [S390] cio: wake up on failed recognition
  [S390] fix hypfs build failure
  [PATCH] sysrq: include interrupt.h instead of irq.h

efifb: dmi set video type

The current logic for dmi matching in efifb does not allow efifb to load
on all hardware that we can dmi match for.

For a real world example, boot with elilo (3.7 or 3.8 vanilla) and on a
Apple (MacBook) and EFI framebuffer driver will not load (you will have no
video).  This specific hardware is efi v1.10, so we have UGA and not GOP.
Without special bootloader magic (i.e.  extra elilo patches for UGA
graphics detection) no screen info will be passed to the kernel and as a
result efifb will not load.

This patch allows the dmi match to happen by moving it to earlier in
efifb_init, and sets the video type (in set_system) so that efifb can load
when we have a valid dmi match and already know the specifics of the
hardware.

Without this patch the efifb driver will fail to load in the event screen
info is not found and passed in by the bootloader, being that we will
never get to look for a dmi match.  A primary reason for matching with dmi
is because not all bootloaders detect the video info properly.  The
solution is that in the event of a dmi match, we should set
screen_info.orig_video_isVGA.  Most bootloaders fail to set screen info on
Apple hardware, and this is a big problem for people who use Apple
hardware.

Tested on a MacBook SantaRosa with elilo-3.8 (vanilla) and resolves the
issue, the dmi match now works, EFI framebuffer now loads and video works.

Signed-off-by: Brian Maly <bmaly@redhat.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: delete acceleration Kconfig option

Remove Kconfig option for tridentfb acceleration.  The acceleration can be
switched off with modules "noaccel" parameter.

The acceleration for Trident chips was fixed in the 2.6.27 kernel.

Also, add CyberXXX and CyberBlade names to Kconfig option's name.  It should
make easier to find the tridentfb choice for cyblafb driver's users.  The
cyblafb driver has been replaced by the tridentfb driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: speed up Mach64 cursor

Save one fifo entry on cursor enabling and disabling.

Save another fifo entry for FB_CUR_SETPOS operation by removing redundant one.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fb: hide hardware cursor in graphics mode (Mach64)

A hardware cursor is left enabled in the fb_set_par() which is called when a
new console is created.  This is inconsistent with software cursor's
behaviour.

Also, this makes a hardware cursor always visible in the Xfbdev (Xorg kdrive)
server.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Risto Suominen <risto.suominen@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nvidiafb: remove open_lock mutex

Remove mutex from the nvidiafb_open/nvidiafb_release functions as these
operations are mutexed at fb layer.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radeonfb: suspend/resume for ATI Mobility Radeon RV350

Add suspend/resume for the Acer Travelmate 290D/292LMi with the following
graphic-chip:

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] TravelMate 290 [1025:005a]
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at a8000000 (32-bit, prefetchable) [size=128M]
I/O ports at c100 [size=256]
Memory at e0010000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at a0000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
Kernel driver in use: radeonfb
Kernel modules: radeonfb

Signed-off-by: Wolfgang Kroener <lkml@azog.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omapfb: fix argument of blank operation

The blank operation should receive FB_BLANK_POWERDOWN, not VESA_POWERDOWN.

Signed-off-by: Felipe Contreras <felipe.contreras@nokia.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uvesafb: fix selecting mode with the vbemode option

If the vbemode option is used, uvesafb calls fb_get_mode() without first
setting the resolution in info->var.  This results in a division by zero
in fb_get_mode(), as evidenced e.g.  in [1].  Fix this by ensuring the
info->var structure is populated before fb_get_mode() is called.

[1] http://bugzilla.kernel.org/show_bug.cgi?id=11661#c37

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: remove cyblafb driver

A tridentfb driver has all the functionality of the cyblafb driver without
the bugs of the latter.

Changes to the tridentfb driver:

- FBINFO_READS_FAST added to the tridentfb.  The cyblafb used a blitter
  for scrolling which is faster than color expansion on Cyberblade
  chipsets.  The blitter is slower on a discrete Blade3D core.  Use the
  blitter for scrolling in the tridentfb only for integrated Blade3D
  cores.  Now, scrolling speed is about equal for the tridentfb and the
  cyblafb.

- a copyright notice addition is done on request of Jani Monoses (the
  first author of the tridentfb).

Tested on AGP Blade3D card and PCChips
M787CLR motherboard: VIA C3 cpu +
VT8601 north  bridge (aka Cyberblade/i1).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fb: add s3c-fb driver for newer Samsung SoC framebuffer devices

Add support for the newer Samsung devices, such as found in the S3C2443,
S3C6400 or S3C6410 series SoC.

It currently does not support all the alpha- or chroma-key options but it
will support more exporting more than one framebuffer ready for adding
overlay and blending functions.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

n411: add missing Makefile entry

There is no entry for n411.c to be built, include one in Makefile.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: returns 0 two too early

Otherwise this will already return 0 if iteration MAXLOOP-2 occurs in the
first loop.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vesafb: bitwise OR has higher precedence than ?:

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michal Januszewski <michalj@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uvesafb: bitwise OR has higher precedence than ?:

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michal Januszewski <michalj@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arkfb: fix misplaced parentheses

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asiliantfb: fix cmap memory leaks

- fix cmap leak in removal path
 - fix cmap leak when register_framebuffer fails
 - check return value of fb_alloc_cmap
 - don't continue with driver setup if register_framebuffer fails

[krzysztof.h1@wp.pl: spotted missing iounmap]
[randy.dunlap@oracle.com: move data declaration before any code]
Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/omap/hwa742.c: div reaches max_clk_div

With for(div = 0; div < max_clk_div; div++) { ... } div reaches max_clk_div.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: update s1d13xxxfb to differ between revisions and production ids

The s1d13xxx chip provides two values of identification value: the
Production id (e.g 13506/13505/13806..) and a revision number 0,1,2,3).
Together these can help us to differentiate between similiar setups.

This patch adds the proper way of grabbing both those values and save them
for future reference (in order to decide what functions a card supports,
e.g acceleration).

We also move away from the concept of all s1d13xxx = s1d13806 when we
really support alot more.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: simplify s1d13xxxfb_probe()]
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: newport: newport_*wait() return 0 on timeout

With a postfix decrement t reaches -1 on timeout which results in a
return of 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amifb: check fb_alloc_cmap return value and handle failure properly

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amba-clcd: fix cmap memory leaks

- fix cmap leak in removal path

- fix cmap leak when register_framebuffer fails

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

68328fb: fix cmap memory leaks

- fix cmap leak in removal path

- fix cmap leak when register_framebuffer fails

- check return value of fb_alloc_cmap

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tgafb: fix cmap memory leak

Fix cmap leak when register_framebuffer fails.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sunxvr500: fix cmap memory leaks

- fix cmap leak in removal path
 - fix cmap leak when register_framebuffer fails

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

valkyriefb: check fb_alloc_cmap return value and handle failure properly

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

stifb: check fb_alloc_cmap return value and handle failure properly

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sstfb: check fb_alloc_cmap return value and handle failure properly

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sm501fb: check fb_alloc_cmap return value and handle failure properly

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skeletonfb: check fb_alloc_cmap return value and handle failure properly

Bad example code, no cookie!

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfb: fix memory leaks in removal path

We were leaking the cmap memory.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: fix memory leaks in removal path

We were leaking the cmap memory.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tdfxfb: fix memory leaks in removal path

We were leaking the cmap memory.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/sgivwfb.c: fix memory leaks in removal path

We were leaking both the cmap memory and the info struct memory.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: uninline lock_fb_info()

Before:

   text    data     bss     dec     hex filename
   3648    2910      32    6590    19be drivers/video/backlight/backlight.o
   3226    2812      32    6070    17b6 drivers/video/backlight/lcd.o
  30990   16688    8480   56158    db5e drivers/video/console/fbcon.o
  15488    8400      24   23912    5d68 drivers/video/fbmem.o

After:

   text    data     bss     dec     hex filename
   3537    2870      32    6439    1927 drivers/video/backlight/backlight.o
   3131    2772      32    5935    172f drivers/video/backlight/lcd.o
  30876   16648    8480   56004    dac4 drivers/video/console/fbcon.o
  15506    8400      24   23930    5d7a drivers/video/fbmem.o

Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbmem: fix fb_info->lock and mm->mmap_sem circular locking dependency

Fix a circular locking dependency in the frame buffer console driver
pushing down the mutex fb_info->lock.

Circular locking dependecies occur calling the blocking
fb_notifier_call_chain() with fb_info->lock held.  Notifier callbacks can
try to acquire mm->mmap_sem, while fb_mmap() acquires the locks in the
reverse order mm->mmap_sem => fb_info->lock.

Tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: fix interlaced modes

Fix calculations of timings for interlaced modes.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: fix threshold register mask for Laguna chips

Fix threshold register mask for Laguna chips otherwise some 8bpp modes are
garbled after selecting a 24bpp mode.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: GD5434 (aka SD64) support fixed

Fix handling of the Cirrus Logic GD5434 chip.  Distinguish this chip from the
GD5430.  It allows detecting memory size for both models correctly.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: set MCLK in one place

A memory clock (MCLK) is set at various places.  Move the setting into one
place.

Set the MCLK only for Zorro cards as the x86 cards should be initialized by
BIOS.

Improve handling of the GD5434 (SD64).

Kill one annoying debug output "virtual offset: ...".

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: add accelerator constant

Add an accelerator constant so almost all Cirrus are recognized as
accelerators by the fbset command.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: fix clock doubling

Cirrus' Alpine and Picasso4 chips uses DAC clock doubling to achieve full
range of pixclock frequencies.

[akpm@linux-foundation.org: fix spelling, use usual comment layout]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: use 24bpp instead of 32bpp

The 32bpp is supported only on the latest Cirrus Logic chips.  Use the
24bpp which is supported at least since Alpine chips (GD543x).

Change 32bpp mode setting to 24bpp mode.  Change acceleration as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: GD5446 fixes

Various fixes to make Cirrus GD5446 chip work.

Another Cirrus chip works with the cirrusfb.  The gd5446 seems very
similar to Alpine chips.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: fix error paths in cirrusfb_xxx_register()

Balance iomap and iounmap and alloc and free calls in case of error druing
device register (probing).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: add imageblit function

Add hardware color expansion (imageblit) function.  It roughly doubles
scrolling speed of my Alpine card (GD5430).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: acceleration improvements

- Fix color expansion for 16bpp and 32bpp modes in the
  cirrusfb_RectFill().

- Make a function with a common blitter code (cirrusfb_set_blitter).

- Add fb_sync function to allow a higher layer synchronize with the
  blitter.

- Kill one redundant blitter reset.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: various Laguna fixes

- The Laguna GD5465 (AGP) has one register more than non-AGP chips.
  Recognize the AGP version and write a tile control register only on the
  AGP version.  Tested only on an AGP card.

- Bump up RAMDAC frequencies after X11 code.  This allow to drive a flat
  panel resolution 1680x1050 at 16bpp from the 4MB card.

- Fix screen start address overflow bits on Laguna cards (CRT1D
  register).

- Fix exit path in the cirrusfb_pci_register() in case of error.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: check_var improvements

Break cirrusfb_decode_var() function into two parts:
cirrusfb_check_pixclock() which can be called from the
cirrusfb_check_var() aand merge rest into the cirrusfb_set_par_foo().
This allows rejecting modes with too high pixclock before before any
change to hardware state (and a console is messed up).

Also, fix RGB field's lengths for 8bpp modes to correct ones so X11 works
with fbdev driver with cirrusfb.

Kill some redundant function calls or register loads.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: Laguna chipset 8bpp fix

Fix 8bpp mode by adding handling of the Laguna chipsets to various places
and stop trashing a HDR register which probably does not exist on the
Laguna.

Fix compilation warnings about uninitialized variables also.

Finally, all 8bpp, 16bpp and 32bpp modes work on the Laguna chipset.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: various improvements

Various improvements to the code:
- kill a structure with only one
  field: multiplexing and use the
  field directly
- move the cirrusfb_ops structure
  down the file to kill forward
  declarations
- move cirrusfb_init() to kill
  forward declaration
- kill register loads done already
  in the init_vgachip()
- kill assigments done by higher
  layer in the cirrusfb_pan_display()
- do not overwrite line pitch bit in
  the CL_CRT1D register
- kill btype variables if they were
  used only once or twice
- add cpu_relax() in the busy waiting
  loop

The fix to the CL_CRT1D register handling makess the 1024x768 32bpp mode
work.  Previously, only lower resolution modes have worked with 32bpp.

Signed-off-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: use 5-6-5 RGB for 16bpp mode

Use the 5-6-5 RGB mode instead of the 5-5-5 mode at 16bpp depth.

It fixes colors in the 16bpp modes on Cirrus Laguna chips.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Cc: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: do not calculate line length twice

A line length is calculated twice: first in the cirrusfb_decode_var() then
in the cirrusfb_set_par_foo().

Use the first calculated value.  A nice side effect is that 32bpp mode
works now.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Cc: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: add mmio registers for Laguna chipsets

The Laguna chipsets use special registers which are available through the
mmio area.  The cirrusfb driver does not use memory mapped registers for
the PCI cards.

Add the memory mapped area for Laguna chipsets and add basic usage of the
special Laguna registers after SVGALIB code.

This gives readable console at 16bpp on the GD-5465 (Laguna AGP).  The
8bpp and 32bpp depths are still broken.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: add Laguna additional overflow register

Add additional overflow register setting for Laguna chips.

Also, simplify some code in the cirrusfb_pan_display() and
cirrusfb_blank().

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: fix Laguna chipset memory detection and clock setting

Fix memory detection and clock setting for Cirrus Laguna chipsets
(GD5464/GD5465).  The changes are done after the Xorg code.

The driver still does not display anything on the GD5465 but it switches
resolutions correctly at least.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: convert printks to dev_foo

Convert all printks to dev_dbg, dev_info or dev_err.  Kill some excessive
debug information and code in the process.

[akpm@linux-foundation.org: printk fixes]
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: fix header file trailing whitespace

Fix trailing whitespace because quilt complained about it.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/uvesafb.c: don't use gfp_any()

GFP_KERNEL is legal here - we don't need to use gfp_any().

Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: test before subtraction on unsigned

new_alarm is unsigned so test before the subtraction.

[akpm@linux-foundation.org: time-wrapping fix]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-v3020: coding style cleanup

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-wm8350: retries will reach -1

With a postfix decrement retries will reach -1 rather than 0, so the
warning and error-out will not occur.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add EPSON RX8025 support to DS1307 RTC driver

Add support for the EPSON RX8025 RTC.  The date/time registers of this
chip are compatible with the DS1307.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-ds1307: true SMBus compatibility

Allow the rtc-ds1307 driver to work with SMBus controllers like nforce2
that do not support i2c block transfers.

Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: BARRE Sebastien <sbarre@sdelcc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-parisc: rename p pointer to rtc

Signed-off-by: dann frazier <dannf@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-parisc: remove a couple unnecessary variables

Signed-off-by: dann frazier <dannf@hp.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-parisc: remove unnecessary ret variable

Signed-off-by: dann frazier <dannf@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-parisc: declare rtc_parisc_dev as static

Signed-off-by: dann frazier <dannf@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-parisc: use platform_driver_probe

This isn't a hotpluggable device, so call platform_driver_probe
directly in parisc_rtc_init

Signed-off-by: dann frazier <dannf@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>