Dave Airlie [Tue, 31 Jan 2017 22:31:09 +0000 (08:31 +1000)]
Merge tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual
Noralf needs this for his tinydrm pull request.
* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
drm/vc4: Remove vc4_debugfs_cleanup()
dma/fence: Export enable-signaling tracepoint for emission by drivers
drm/tilcdc: Remove tilcdc_debugfs_cleanup()
drm/tegra: Remove tegra_debugfs_cleanup()
drm/sti: Remove drm_debugfs_remove_files() calls
drm/radeon: Remove drm_debugfs_remove_files() call
drm/omap: Remove omap_debugfs_cleanup()
drm/hdlcd: Remove hdlcd_debugfs_cleanup()
drm/etnaviv: Remove etnaviv_debugfs_cleanup()
drm/etnaviv: allow build with COMPILE_TEST
drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
drm/prime: Clarify DMA-BUF/GEM Object lifetime
drm/ttm: Make sure BOs being swapped out are cacheable
drm/atomic: Remove drm_atomic_debugfs_cleanup()
drm: drm_minor_register(): Clean up debugfs on failure
drm: debugfs: Remove all files automatically on cleanup
drm/fourcc: add vivante tiled layout format modifiers
drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
drm/edid: Set AVI infoframe Q even when QS=0
drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
...
Dave Airlie [Tue, 31 Jan 2017 22:30:19 +0000 (08:30 +1000)]
Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git./linux/kernel/git/bbrezillon/linux into drm-next
Contains a single patch to create the fbdev at driver's registration
time instead of waiting for the connector status change.
* tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux:
drm/atmel-hlcdc: Rework the fbdev creation logic
Dave Airlie [Tue, 31 Jan 2017 22:26:33 +0000 (08:26 +1000)]
Merge tag 'zxdrm-4.11' of git://git./linux/kernel/git/shawnguo/linux into drm-next
ZTE DRM driver updates for 4.11:
- Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
driver uses drm_display_mode_to_videomode().
- Enable HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver.
- Enable VOU VL (Video Layer) to support overlay plane with scaling
function.
- Refine zx_vou driver a bit and then add TV Encoder output device
support.
[airlied: fixup plane format change]
* tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
drm: zte: add tvenc driver support
dt: add bindings for ZTE tvenc device
drm: zte: add function to configure vou_ctrl dividers
drm: zte: move struct vou_inf into zx_vou driver
drm: zte: add interlace mode support
drm: zte: add overlay plane support
drm: zte: add .atomic_disable hook to disable graphic layer
drm: zte: make zx_plane accessible from zx_vou driver
drm: zte: support hdmi audio through spdif
drm: zte: select VIDEOMODE_HELPERS in Kconfig
Dave Airlie [Tue, 31 Jan 2017 22:26:02 +0000 (08:26 +1000)]
Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel into drm-next
Updated pull request after I pulled first time :)
* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view
Dave Airlie [Tue, 31 Jan 2017 22:07:23 +0000 (08:07 +1000)]
Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
Hope I'm not too late before the cutoff for the v4.11 with these patches.
Mostly an asorted set of fixes that we have discovered while playing with
the code and preparing for the next set of features.
* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
drm: mali-dp: fix stride setting for multi-plane formats
drm: mali-dp: Add plane offset to the plane's physical start address register
drm: mali-dp: Check for sufficient address space
drm: mali-dp: Check hw version matches device-tree
drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
drm: mali-dp: fix Lx_CONTROL register fields clobber
drm: mali-dp: Fix transposed horizontal/vertical flip
drm: mali-dp: Fix destination size handling when rotating
drm: mali-dp: Don't force source size == crtc size
drm: mali-dp: Check more use cases in the plane's ->atomic_check()
drm: malidp: Remove event_list member from struct malidp_drm
drm/arm/malidp: Fix possible dereference of NULL
Boris Brezillon [Mon, 28 Nov 2016 14:56:53 +0000 (15:56 +0100)]
drm/atmel-hlcdc: Rework the fbdev creation logic
Now that we wait for DRM panels to be available before registering the
DRM device (returning -EPROBE_DEFER if the panel has not been probed
yet), we no longer need to put the fbdev creation code in
->output_poll_changed().
This removes the 10 secs delay between DRM dev registration and fbdev
creation (polling period = 10 seconds).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
Noralf Trønnes [Thu, 26 Jan 2017 22:56:18 +0000 (23:56 +0100)]
drm/vc4: Remove vc4_debugfs_cleanup()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.
Cc: eric@anholt.net
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-17-noralf@tronnes.org
Shawn Guo [Thu, 19 Jan 2017 14:28:38 +0000 (22:28 +0800)]
drm: zte: add tvenc driver support
It adds the TV Encoder driver to support video output in PAL and NTSC
format. The driver uses syscon/regmap interface to configure register
bit sitting in SYSCTRL module for DAC power control.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Shawn Guo [Thu, 19 Jan 2017 15:34:25 +0000 (23:34 +0800)]
dt: add bindings for ZTE tvenc device
It adds bindings doc for ZTE VOU TV Encoder device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Shawn Guo [Thu, 12 Jan 2017 14:20:31 +0000 (22:20 +0800)]
drm: zte: add function to configure vou_ctrl dividers
The clock control module (CRM) cannot always provide desired frequency
for all VOU output devices. That's why VOU integrates a few dividers
to further divide the clocks from CRM. Let's add an interface for
configuring these dividers.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Shawn Guo [Thu, 12 Jan 2017 08:27:35 +0000 (16:27 +0800)]
drm: zte: move struct vou_inf into zx_vou driver
Although data in struct vou_inf is defined per output device, it doesn't
belong to the device itself but VOU control module. All these data can
just be defined in VOU driver, and output device driver only needs to
invoke VOU driver function with device ID to enable/disable specific
output device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Shawn Guo [Thu, 12 Jan 2017 06:44:40 +0000 (14:44 +0800)]
drm: zte: add interlace mode support
It adds interlace mode support in VOU TIMING_CTRL and channel control
block, so that VOU driver gets ready to support output device in
interlace mode like TV Encoder.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Shawn Guo [Wed, 16 Nov 2016 06:43:59 +0000 (14:43 +0800)]
drm: zte: add overlay plane support
It enables VOU VL (Video Layer) to support overlay plane with scaling
function. VL0 has some quirks on scaling support. We choose to skip it
and only adds VL1 and VL2 into DRM core for now.
Function zx_plane_atomic_disable() gets moved around with no changes to
save a forward declaration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Shawn Guo [Thu, 29 Dec 2016 00:03:03 +0000 (08:03 +0800)]
drm: zte: add .atomic_disable hook to disable graphic layer
There are a few hardware bits for each graphic layer to control main/aux
channel and clock selection, as well as the layer enabling. These bits
sit outside the layer block itself, but in VOU control glue block. We
currently set these bits up at CRTC initialization for once, and do not
support disabling the layer.
This patch creates a pair of functions zx_vou_layer_enable[disable] to
be invoked from plane hooks .atomic_update and .atomic_disable to set up
and tear down the layer. This is generic for both graphic and video
layers, so it will make the overlay plane support to be added later much
easier.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Shawn Guo [Wed, 28 Dec 2016 06:41:37 +0000 (14:41 +0800)]
drm: zte: make zx_plane accessible from zx_vou driver
Move struct zx_plane from zx_plane.c to zx_plane.h, so that it can be
accessed from zx_vou driver, and we can save the use of struct
zx_layer_data completely. More importantly, those additional data used
by VOU controller to enable/disable graphic and video layers can later
be added and accessed much more easily from zx_vou driver.
While at it, we make two changes to zx_plane_init() interface:
- Encode struct device pointer in zx_plane, so that we do not need to
pass it as a parameter.
- Change return of zx_plane_init() from struct drm_plane pointer to
error code, since we can get the pointer from zx_plane in zx_vou
driver now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Shawn Guo [Thu, 1 Dec 2016 09:20:31 +0000 (17:20 +0800)]
drm: zte: support hdmi audio through spdif
It enables HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver. The HDMI hardware supports more audio
interfaces than SPDIF, like I2S, which may be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Mon, 9 Jan 2017 07:19:19 +0000 (15:19 +0800)]
drm: zte: select VIDEOMODE_HELPERS in Kconfig
ZTE DRM driver uses drm_display_mode_to_videomode() in function
zx_crtc_enable(). Select VIDEOMODE_HELPERS in Kconfig to fix the
following link error.
LD vmlinux.o
MODPOST vmlinux.o
drivers/built-in.o: In function `zx_crtc_enable':
:(.text+0xbdeb8): undefined reference to `drm_display_mode_to_videomode'
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Chris Wilson [Tue, 24 Jan 2017 11:57:58 +0000 (11:57 +0000)]
dma/fence: Export enable-signaling tracepoint for emission by drivers
Currently this tracepoint is solely used by dma_fence_enable_sw_signaling,
however I have a need to manually perform the hw enabling of the
signaling and would like to emit this tracepoint for completeness.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124115758.31353-1-chris@chris-wilson.co.uk
Noralf Trønnes [Thu, 26 Jan 2017 22:56:17 +0000 (23:56 +0100)]
drm/tilcdc: Remove tilcdc_debugfs_cleanup()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed. Also remove the unused tilcdc_module_ops.debugfs_cleanup()
callback. drm_debugfs_cleanup() removes all debugfs files using
debugfs_remove_recursive(), so there should be no need for such a
callback in the future.
Cc: jsarha@ti.com
Cc: tomi.valkeinen@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-16-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:16 +0000 (23:56 +0100)]
drm/tegra: Remove tegra_debugfs_cleanup()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.
Cc: thierry.reding@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-15-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:15 +0000 (23:56 +0100)]
drm/sti: Remove drm_debugfs_remove_files() calls
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call
drm_debugfs_remove_files(). Additionally it uses
debugfs_remove_recursive() to clean up the debugfs files, so no need
for adding fake drm_info_node entries.
Cc: benjamin.gaignard@linaro.org
Cc: vincent.abriou@st.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Tested-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-14-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:14 +0000 (23:56 +0100)]
drm/radeon: Remove drm_debugfs_remove_files() call
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call drm_debugfs_remove_files().
Cc: alexander.deucher@amd.com
Cc: christian.koenig@amd.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-13-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:13 +0000 (23:56 +0100)]
drm/omap: Remove omap_debugfs_cleanup()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.
Cc: tomi.valkeinen@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-12-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:10 +0000 (23:56 +0100)]
drm/hdlcd: Remove hdlcd_debugfs_cleanup()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.
Cc: liviu.dudau@arm.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-9-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:09 +0000 (23:56 +0100)]
drm/etnaviv: Remove etnaviv_debugfs_cleanup()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.
Cc: l.stach@pengutronix.de
Cc: linux+etnaviv@armlinux.org.uk
Cc: christian.gmeiner@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-8-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:08 +0000 (23:56 +0100)]
drm/etnaviv: allow build with COMPILE_TEST
Make it possible to compile test the driver on other platforms.
Cc: l.stach@pengutronix.de
Cc: linux+etnaviv@armlinux.org.uk
Cc: christian.gmeiner@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-7-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:06 +0000 (23:56 +0100)]
drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so no need to call drm_debugfs_remove_files().
Also remove empty drm_driver.debugfs_cleanup callback.
Cc: alexander.deucher@amd.com
Cc: christian.koenig@amd.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-5-noralf@tronnes.org
Oleksandr Andrushchenko [Fri, 27 Jan 2017 07:04:25 +0000 (09:04 +0200)]
drm/prime: Clarify DMA-BUF/GEM Object lifetime
From the description of the "DMA-BUF/GEM Object references
and lifetime overview" it is not clear when exactly
dma_buf gets destroyed and memory freed: only driver
.release function mentioned which makes confusion on the
real buffer's lifetime.
Add more description so all the paths are covered.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
[danvet: Minor spelling fixes, and some clarification of the 2nd
paragraph.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485500665-27690-1-git-send-email-andr2000@gmail.com
Michel Dänzer [Wed, 25 Jan 2017 08:21:31 +0000 (17:21 +0900)]
drm/ttm: Make sure BOs being swapped out are cacheable
The current caching state may not be tt_cached, even though the
placement contains TTM_PL_FLAG_CACHED, because placement can contain
multiple caching flags. Trying to swap out such a BO would trip up the
BUG_ON(ttm->caching_state != tt_cached);
in ttm_tt_swapout.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Noralf Trønnes [Thu, 26 Jan 2017 22:56:05 +0000 (23:56 +0100)]
drm/atomic: Remove drm_atomic_debugfs_cleanup()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so no need to call drm_debugfs_remove_files().
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-4-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:04 +0000 (23:56 +0100)]
drm: drm_minor_register(): Clean up debugfs on failure
Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to
cover for failure in the drm_driver.debugfs_init callback.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@tronnes.org
Noralf Trønnes [Thu, 26 Jan 2017 22:56:03 +0000 (23:56 +0100)]
drm: debugfs: Remove all files automatically on cleanup
Instead of having the drivers call drm_debugfs_remove_files() in
their drm_driver->debugfs_cleanup hook, do it automatically by
traversing minor->debugfs_list.
Also use debugfs_remove_recursive() so drivers who add their own
debugfs files don't have to keep track of them for removal.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-2-noralf@tronnes.org
Philipp Zabel [Thu, 26 Jan 2017 15:32:17 +0000 (16:32 +0100)]
drm/fourcc: add vivante tiled layout format modifiers
Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
formats as well as so-called split-tiled variants for dual-pipe
hardware, where even and odd tiles start at different base addresses.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126153217.26916-1-p.zabel@pengutronix.de
Chris Wilson [Wed, 25 Jan 2017 10:10:44 +0000 (10:10 +0000)]
drm/sti: Fix compilation failure for drm_framebuffer.pixel_format
drivers/gpu/drm/sti/sti_plane.c:76:33: error: ‘struct drm_framebuffer’
has no member named ‘pixel_format’; did you mean ‘format’?
I didn't look to hard at the casting to a char * and just did a
mechanical transformation of s/pixel_format/format->format/ as given in
commit
438b74a5497c ("drm: Nuke fb->pixel_format").
Fixes:
438b74a5497c ("drm: Nuke fb->pixel_format")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 27 Jan 2017 02:10:24 +0000 (12:10 +1000)]
Merge tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc into drm-next
- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff
* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
drm: qxl: Open code teardown function for qxl
drm: qxl: Open code probing sequence for qxl
drm/bridge: adv7511: Re-write the i2c address before EDID probing
drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm: vc4: use crtc helper drm_crtc_from_index()
drm: tegra: use crtc helper drm_crtc_from_index()
drm: nouveau: use crtc helper drm_crtc_from_index()
drm: mediatek: use crtc helper drm_crtc_from_index()
drm: kirin: use crtc helper drm_crtc_from_index()
drm: exynos: use crtc helper drm_crtc_from_index()
dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
drm: bridge: dw-hdmi: Detect PHY type at runtime
drm: bridge: dw-hdmi: Handle overflow workaround based on device version
...
Dave Airlie [Fri, 27 Jan 2017 02:08:32 +0000 (12:08 +1000)]
Merge tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel into drm-next
Final block of feature work for 4.11:
- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
(Libin)
- huc loading support, including uapi for libva to use it (Anusha
Srivatsa)
* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
drm/i915: Update DRIVER_DATE to
20170123
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Assert that created vma has a whole number of pages
drm/i915: Assert the drm_mm_node is allocated when on the VM lists
drm/i915: Treat an error from i915_vma_instance() as unlikely
drm/i915: Reject vma creation larger than address space
drm/i915: Use common LRU inactive vma bumping for unpin_from_display
drm/i915: Do an unlocked wait before set-cache-level ioctl
drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
drm/i915/huc: Avoid attempting to authenticate non-existent fw
drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
drm/i915: Release temporary load-detect state upon switching
drm/i915: Remove i915_gem_object_to_ggtt()
drm/i915: Remove i915_vma_create from VMA API
drm/i915: Add a check that the VMA instance we lookup matches the request
drm/i915: Rename some warts in the VMA API
drm/i915: Track pinned vma in intel_plane_state
drm/i915/get_params: Add HuC status to getparams
...
Dave Airlie [Fri, 27 Jan 2017 02:04:08 +0000 (12:04 +1000)]
Reinstate "drm/probe-helpers: Drop locking from poll_enable""
This reverts commit
54a07c7bb0da0343734c78212bbe9f3735394962,
and reinstates the original.
[airlied: this might be a bad plan for git].
commit
3846fd9b86001bea171943cc3bb9222cb6da6b42
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 11 10:01:17 2017 +0100
drm/probe-helpers: Drop locking from poll_enable
It was only needed to protect the connector_list walking, see
commit
8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:26 2015 +0200
drm/probe-helper: Grab mode_config.mutex in poll_init/enable
Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.
But that requirement disappeared in
commit
c36a3254f7857f1ad9badbe3578ccc92be541a8e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Dec 15 16:58:43 2016 +0100
drm: Convert all helpers to drm_connector_list_iter
and so we can drop this again.
This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.
While at it, also improve the kerneldoc for these two functions a
notch.
v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).
Dave Airlie [Fri, 27 Jan 2017 01:00:42 +0000 (11:00 +1000)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux into drm-next
Backmerge Linus master to get the connector locking revert.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
Revert "drm/probe-helpers: Drop locking from poll_enable"
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
...
Eric Dumazet [Thu, 26 Jan 2017 02:20:55 +0000 (18:20 -0800)]
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.
We need to do the opposite operation when value is written by user.
Only matters when HZ != 1000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 26 Jan 2017 17:08:49 +0000 (09:08 -0800)]
Merge tag 'pinctrl-v4.10-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"A bunch of pin control fixes for v4.10 that didn't get sent off until
now, sorry for the delay.
It's only driver fixes:
- A bunch of fixes to the Intel drivers: broxton, baytrail. Bugs
related to register offsets, IRQ, debounce functionality.
- Fix a conflict amongst UART settings on the meson.
- Fix the ethernet setting on the Uniphier.
- A compilation warning squelched"
* tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20
pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
pinctrl: amd: avoid maybe-uninitalized warning
pinctrl: baytrail: Do not add all GPIOs to IRQ domain
pinctrl: baytrail: Rectify debounce support
pinctrl: intel: Set pin direction properly
pinctrl: broxton: Use correct PADCFGLOCK offset
Linus Torvalds [Thu, 26 Jan 2017 16:55:33 +0000 (08:55 -0800)]
Merge tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux
Pull drm revert from Dave Airlie:
"Revert one patch missing some prereqs.
One of the connector fixes was missing some prereqs, we have an
alternate driver fix that should work that I'll send tomorrow.
Today is a holiday here so quickly smashing this out"
Daniel Vetter explains:
"I pushed a locking change to fix a nouveau rpm issue to -fixes that
needed the connector_list rework. And that's only in -next, but I
missed that. Dave has the revert in a pull, and he'll follow-up with
the hack nouveau patch for 4.10, and then we'll reapply the proper fix
again for -next and revert the hacks. A bit a mess, but should be
sorted soon"
* tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux:
Revert "drm/probe-helpers: Drop locking from poll_enable"
Ville Syrjälä [Wed, 11 Jan 2017 12:57:25 +0000 (14:57 +0200)]
drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
CEA-861-F tells us:
"When transmitting any RGB colorimetry, the Source should set the
YQ-field to match the RGB Quantization Range being transmitted
(e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB,
set YQ=1) and the Sink shall ignore the YQ-field."
So let's go ahead and do that. Perhaps there are sinks that don't
ignore the YQ as they should for RGB?
I wasn't able to find similar text in CEA-861-E, so it would seem
to be a fairly "recent" addition.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Ville Syrjälä [Wed, 11 Jan 2017 12:57:24 +0000 (14:57 +0200)]
drm/edid: Set AVI infoframe Q even when QS=0
HDMI 2.0 recommends that we set the Q bits in the AVI infoframe
even when the sink does not support quantization range selection (QS=0).
According to CEA-861 we can do that as long as the Q we send matches
the default quantization range for the mode.
Previously I think I had misread the spec as saying that you can't
send a non-zero Q at all when QS=0. But that's not what the spec
actually says.
v2: Fix typo in commit message (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Ville Syrjälä [Wed, 11 Jan 2017 12:57:23 +0000 (14:57 +0200)]
drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
Pull the logic to populate the quantization range information
in the AVI infoframe into a small helper. We'll be adding a bit
more logic to it, and having it in a central place seems like a
good idea since it's based on the CEA-861 spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Ville Syrjälä [Wed, 11 Jan 2017 14:18:35 +0000 (16:18 +0200)]
drm/edid: Introduce drm_default_rgb_quant_range()
Make the code selecting the RGB quantization range a little less magicy
by wrapping it up in a small helper.
v2: s/adjusted_mode/mode in vc4 to make it actually compile
v3: Add a comment proposed by Eric
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Ville Syrjälä [Wed, 11 Jan 2017 12:57:21 +0000 (14:57 +0200)]
drm/edid: Have drm_edid.h include hdmi.h
drm_edid.h depends on hdmi.h on account of enum hdmi_picture_aspect,
so let's just include hdmi.h and drop some useless struct declarations.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Chris Wilson [Thu, 26 Jan 2017 11:44:09 +0000 (11:44 +0000)]
drm: Silence the compiler for drm_mode_get_hv_timings()
Since moving drm_crtc_get_hv_timings() into drm_modes.c, the compiler
has been able to get smarter and spots that drm_mode_copy() is trying to
preserve garbage from the stack.
Fixes:
196cd5d3758c ("drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126114409.9115-1-chris@chris-wilson.co.uk
Mihail Atanassov [Mon, 23 Jan 2017 15:24:35 +0000 (15:24 +0000)]
drm: mali-dp: fix stride setting for multi-plane formats
Hardware has multiple (2 or 3, depending on model) stride
registers per layer; add a function that correctly takes that
into account. On hardware that only has 2 stride registers,
ensure that 3-plane (YUV) content has identical strides
for both chroma planes.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[Removed smart layer stride setup, comment and commit message clarifications]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Liviu Dudau [Wed, 25 Jan 2017 17:40:02 +0000 (17:40 +0000)]
drm: mali-dp: Add plane offset to the plane's physical start address register
Add the fb->offset[] value to the plane's physical start address
registe. Without that, packed formats are rendered incorrectly.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Mihail Atanassov [Mon, 23 Jan 2017 13:46:42 +0000 (13:46 +0000)]
drm: mali-dp: Check for sufficient address space
If the device-tree 'reg' node doesn't reserve enough
space for the DP, fail to bind.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[renamed added function to malidp_has_sufficient_address_space]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Mihail Atanassov [Mon, 23 Jan 2017 13:46:41 +0000 (13:46 +0000)]
drm: mali-dp: Check hw version matches device-tree
Refuse to bind if the device-tree compatible string
lists a different hardware version.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Brian Starkey [Mon, 3 Oct 2016 14:08:12 +0000 (15:08 +0100)]
drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
We're going to use the same format list for output formats, so rename
everything related to input formats to avoid confusion.
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[touched commit title to clarify the final struct name]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Chris Wilson [Mon, 23 Jan 2017 14:52:45 +0000 (14:52 +0000)]
drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view
Since tweaking i915_vma_compare() we allowed constructors to skip
clearing the ggtt_view believing that we didn't access the unused
members. That, as it turns out, was not entirely true. In particular,
i915_gem_fault() uses
ret = remap_io_mapping(area,
area->vm_start + (vma->ggtt_view.partial.offset << PAGE_SHIFT),
(ggtt->mappable_base + vma->node.start) >> PAGE_SHIFT,
min_t(u64, vma->size, area->vm_end - area->vm_start),
&ggtt->mappable);
i.e. the ggtt_view.partial for both normal and partial views. If we
allowed garbage into the normal vma->ggtt_view and then try userspace
tried to mmap it, we could explode in an unobvious fashion.
Fixes:
7b92c047bae2 ("drm/i915: Eliminate superfluous i915_ggtt_view_rotated")
Fixes:
3bf4d5751943 ("drm/i915: Stop clearing i915_ggtt_view")
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123145245.3972-1-chris@chris-wilson.co.uk
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit
7c518460303353084ebcfca99bc4b67ce33745a1)
Daniel Vetter [Wed, 25 Jan 2017 06:26:55 +0000 (07:26 +0100)]
drm/doc: Fix typos for early_unregister doc
There's no late_unregister. While at it switch to the new canonical
reference style.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-14-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:56 +0000 (07:26 +0100)]
drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/
The function operates on modes, not CRTCs. Also move it into
drm_modes.[hc]. Spotted while reviewing CRTC docs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-15-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:54 +0000 (07:26 +0100)]
drm/moc: Mark legacy fields in drm_driver as such
No point in documenting these, they only confuse.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-13-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:53 +0000 (07:26 +0100)]
drm: Nuke ums vgaarb support
i915, nouveau (ever since merged to upstream) and radeon all lack ums
support in upstream. No point keeping the ums vgaarb support around.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-12-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:52 +0000 (07:26 +0100)]
drm: remove device_is_agp callback
With that the drm_pci_device_is_agp function becomes trivial, so
inline that too. And while at it, move the drm_pci_agp_destroy
declaration into drm-internal.h, since it's not used by drivers.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-11-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:51 +0000 (07:26 +0100)]
drm/mga: remove device_is_agp callback
It's only for a device quirk, and we might as well do that in the load
callback.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:50 +0000 (07:26 +0100)]
drm/i810: drop device_is_agp callback
Use the same trick we used for i915 when we still had ums support:
Just initialize the agp support unconditionally in the driver load
function.
Unfortunately that means we need to export drm_agp_init again, but I
think that's a lesser evil.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-9-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:48 +0000 (07:26 +0100)]
drm/doc: Clarify connector overview
There was a bit of mix-up between initialization and registering.
v2: Review from Gustavo.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-7-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-8-daniel.vetter@ffwll.ch
Dave Airlie [Wed, 25 Jan 2017 20:44:03 +0000 (06:44 +1000)]
Revert "drm/probe-helpers: Drop locking from poll_enable"
This reverts commit
3846fd9b86001bea171943cc3bb9222cb6da6b42.
There were some precursor commits missing for this around connector
locking, we should probably merge Lyude's nouveau avoid the problem patch.
Linus Torvalds [Wed, 25 Jan 2017 18:25:36 +0000 (10:25 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael Tsirkin:
- ARM DMA fixes
- vhost vsock bugfix
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vring: Force use of DMA API for ARM-based systems with legacy devices
virtio_mmio: Set DMA masks appropriately
vhost/vsock: handle vhost_vq_init_access() error
Daniel Vetter [Wed, 25 Jan 2017 06:26:57 +0000 (07:26 +0100)]
drm: Update kerneldoc for drm_crtc.[hc]
After going through all the trouble of splitting out parts from
drm_crtc.[hc] and then properly documenting each I've entirely
forgotten to show the same TLC for CRTCs themselves!
Let's make amends asap.
v2: Review from Eric.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Wed, 25 Jan 2017 06:26:49 +0000 (07:26 +0100)]
drm/gma500: Nuke device_is_agp callback
Returning 0 for an on-chip gpu doesn't change anything at all.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-8-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:45 +0000 (07:26 +0100)]
drm/kms-core: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Eric.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:47 +0000 (07:26 +0100)]
drm/core: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Gustavo.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-6-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:46 +0000 (07:26 +0100)]
drm/gem|prime|mm: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-5-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 25 Jan 2017 06:26:43 +0000 (07:26 +0100)]
drm/kms-helpers: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Comments from Gustavo.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
Dhinakaran Pandiyan [Tue, 24 Jan 2017 23:49:29 +0000 (15:49 -0800)]
drm/dp: Store drm_device in MST topology manager
struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev.
Changing this to instead hold a pointer to drm_device is more useful as it
gives access to DRM structures. This also makes it consistent with other
DRM structures like drm_crtc, drm_connector etc.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com
Linus Torvalds [Wed, 25 Jan 2017 00:54:39 +0000 (16:54 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"26 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
mm: alloc_contig: re-allow CMA to compact FS pages
mm/slub.c: trace free objects at KERN_INFO
...
Dan Streetman [Tue, 24 Jan 2017 23:18:57 +0000 (15:18 -0800)]
MAINTAINERS: add Dan Streetman to zbud maintainers
Add myself as zbud maintainer.
Link: http://lkml.kernel.org/r/20170124221705.26523-1-ddstreet@ieee.org
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Streetman [Tue, 24 Jan 2017 23:18:55 +0000 (15:18 -0800)]
MAINTAINERS: add Dan Streetman to zswap maintainers
Add myself as zswap maintainer.
Link: http://lkml.kernel.org/r/20170124212200.19052-1-ddstreet@ieee.org
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhong jiang [Tue, 24 Jan 2017 23:18:52 +0000 (15:18 -0800)]
mm: do not export ioremap_page_range symbol for external module
Recently, I've found cases in which ioremap_page_range was used
incorrectly, in external modules, leading to crashes. This can be
partly attributed to the fact that ioremap_page_range is lower-level,
with fewer protections, as compared to the other functions that an
external module would typically call. Those include:
ioremap_cache
ioremap_nocache
ioremap_prot
ioremap_uc
ioremap_wc
ioremap_wt
...each of which wraps __ioremap_caller, which in turn provides a safer
way to achieve the mapping.
Therefore, stop EXPORT-ing ioremap_page_range.
Link: http://lkml.kernel.org/r/1485173220-29010-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 24 Jan 2017 23:18:49 +0000 (15:18 -0800)]
mn10300: fix build error of missing fpu_save()
When CONFIG_FPU is not enabled on arch/mn10300, <asm/switch_to.h> causes
a build error with a call to fpu_save():
kernel/built-in.o: In function `.L410':
core.c:(.sched.text+0x28a): undefined reference to `fpu_save'
Fix this by including <asm/fpu.h> in <asm/switch_to.h> so that an empty
static inline fpu_save() is defined.
Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Tue, 24 Jan 2017 23:18:46 +0000 (15:18 -0800)]
romfs: use different way to generate fsid for BLOCK or MTD
Commit
8a59f5d25265 ("fs/romfs: return f_fsid for statfs(2)") generates
a 64bit id from sb->s_bdev->bd_dev. This is only correct when romfs is
defined with CONFIG_ROMFS_ON_BLOCK. If romfs is only defined with
CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev
will triger an oops.
Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y,
both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined.
Therefore when calling huge_encode_dev() to generate a 64bit id, I use
the follow order to choose parameter,
- CONFIG_ROMFS_ON_BLOCK defined
use sb->s_bdev->bd_dev
- CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined
use sb->s_dev when,
- both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined
leave id as 0
When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev
is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index,
otherwise sb->s_dev is 0.
This is a try-best effort to generate a uniq file system ID, if all the
above conditions are not meet, f_fsid of this romfs instance will be 0.
Generally only one romfs can be built on single MTD block device, this
method is enough to identify multiple romfs instances in a computer.
Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.de
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Nong Li <nongli1031@gmail.com>
Tested-by: Nong Li <nongli1031@gmail.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee [Tue, 24 Jan 2017 23:18:43 +0000 (15:18 -0800)]
frv: add missing atomic64 operations
Some more atomic64 operations were missing and as a result frv
allmodconfig was failing. Add the missing operations.
Link: http://lkml.kernel.org/r/1485193844-12850-1-git-send-email-sudip.mukherjee@codethink.co.uk
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 24 Jan 2017 23:18:41 +0000 (15:18 -0800)]
mm, page_alloc: fix premature OOM when racing with cpuset mems update
Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode
triggers OOM killer in few seconds, despite lots of free memory. The
test attempts to repeatedly fault in memory in one process in a cpuset,
while changing allowed nodes of the cpuset between 0 and 1 in another
process.
The problem comes from insufficient protection against cpuset changes,
which can cause get_page_from_freelist() to consider all zones as
non-eligible due to nodemask and/or current->mems_allowed. This was
masked in the past by sufficient retries, but since commit
682a3385e773
("mm, page_alloc: inline the fast path of the zonelist iterator") we fix
the preferred_zoneref once, and don't iterate over the whole zonelist in
further attempts, thus the only eligible zones might be placed in the
zonelist before our starting point and we always miss them.
A previous patch fixed this problem for current->mems_allowed. However,
cpuset changes also update the task's mempolicy nodemask. The fix has
two parts. We have to repeat the preferred_zoneref search when we
detect cpuset update by way of seqcount, and we have to check the
seqcount before considering OOM.
[akpm@linux-foundation.org: fix typo in comment]
Link: http://lkml.kernel.org/r/20170120103843.24587-5-vbabka@suse.cz
Fixes:
c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 24 Jan 2017 23:18:38 +0000 (15:18 -0800)]
mm, page_alloc: move cpuset seqcount checking to slowpath
This is a preparation for the following patch to make review simpler.
While the primary motivation is a bug fix, this also simplifies the fast
path, although the moved code is only enabled when cpusets are in use.
Link: http://lkml.kernel.org/r/20170120103843.24587-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 24 Jan 2017 23:18:35 +0000 (15:18 -0800)]
mm, page_alloc: fix fast-path race with cpuset update or removal
Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode
triggers OOM killer in few seconds, despite lots of free memory. The
test attempts to repeatedly fault in memory in one process in a cpuset,
while changing allowed nodes of the cpuset between 0 and 1 in another
process.
One possible cause is that in the fast path we find the preferred
zoneref according to current mems_allowed, so that it points to the
middle of the zonelist, skipping e.g. zones of node 1 completely. If
the mems_allowed is updated to contain only node 1, we never reach it in
the zonelist, and trigger OOM before checking the cpuset_mems_cookie.
This patch fixes the particular case by redoing the preferred zoneref
search if we switch back to the original nodemask. The condition is
also slightly changed so that when the last non-root cpuset is removed,
we don't miss it.
Note that this is not a full fix, and more patches will follow.
Link: http://lkml.kernel.org/r/20170120103843.24587-3-vbabka@suse.cz
Fixes:
682a3385e773 ("mm, page_alloc: inline the fast path of the zonelist iterator")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 24 Jan 2017 23:18:32 +0000 (15:18 -0800)]
mm, page_alloc: fix check for NULL preferred_zone
Patch series "fix premature OOM regression in 4.7+ due to cpuset races".
This is v2 of my attempt to fix the recent report based on LTP cpuset
stress test [1]. The intention is to go to stable 4.9 LTSS with this,
as triggering repeated OOMs is not nice. That's why the patches try to
be not too intrusive.
Unfortunately why investigating I found that modifying the testcase to
use per-VMA policies instead of per-task policies will bring the OOM's
back, but that seems to be much older and harder to fix problem. I have
posted a RFC [2] but I believe that fixing the recent regressions has a
higher priority.
Longer-term we might try to think how to fix the cpuset mess in a better
and less error prone way. I was for example very surprised to learn,
that cpuset updates change not only task->mems_allowed, but also
nodemask of mempolicies. Until now I expected the parameter to
alloc_pages_nodemask() to be stable. I wonder why do we then treat
cpusets specially in get_page_from_freelist() and distinguish HARDWALL
etc, when there's unconditional intersection between mempolicy and
cpuset. I would expect the nodemask adjustment for saving overhead in
g_p_f(), but that clearly doesn't happen in the current form. So we
have both crazy complexity and overhead, AFAICS.
[1] https://lkml.kernel.org/r/CAFpQJXUq-JuEP=QPidy4p_=FN0rkH5Z-kfB4qBvsf6jMS87Edg@mail.gmail.com
[2] https://lkml.kernel.org/r/
7c459f26-13a6-a817-e508-
b65b903a8378@suse.cz
This patch (of 4):
Since commit
c33d6c06f60f ("mm, page_alloc: avoid looking up the first
zone in a zonelist twice") we have a wrong check for NULL preferred_zone,
which can theoretically happen due to concurrent cpuset modification. We
check the zoneref pointer which is never NULL and we should check the zone
pointer. Also document this in first_zones_zonelist() comment per Michal
Hocko.
Fixes:
c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Link: http://lkml.kernel.org/r/20170120103843.24587-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Tue, 24 Jan 2017 23:18:29 +0000 (15:18 -0800)]
kernel/panic.c: add missing \n
When a system panics, the "Rebooting in X seconds.." message is never
printed because it lacks a new line. Fix it.
Link: http://lkml.kernel.org/r/20170119114751.2724-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Tue, 24 Jan 2017 23:18:24 +0000 (15:18 -0800)]
fbdev: color map copying bounds checking
Copying color maps to userspace doesn't check the value of to->start,
which will cause kernel heap buffer OOB read due to signedness wraps.
CVE-2016-8405
Link: http://lkml.kernel.org/r/20170105224249.GA50925@beast
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Peter Pi (@heisecode) of Trend Micro
Cc: Min Chong <mchong@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee [Tue, 24 Jan 2017 23:18:21 +0000 (15:18 -0800)]
frv: add atomic64_add_unless()
The build of frv allmodconfig was failing with the error:
lib/atomic64_test.c:209:9: error:
implicit declaration of function 'atomic64_add_unless'
All the atomic64 operations were defined in frv, but
atomic64_add_unless() was not done.
Implement atomic64_add_unless() as done in other arches.
Link: http://lkml.kernel.org/r/1484781236-6698-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 24 Jan 2017 23:18:18 +0000 (15:18 -0800)]
mm/mempolicy.c: do not put mempolicy before using its nodemask
Since commit
be97a41b291e ("mm/mempolicy.c: merge alloc_hugepage_vma to
alloc_pages_vma") alloc_pages_vma() can potentially free a mempolicy by
mpol_cond_put() before accessing the embedded nodemask by
__alloc_pages_nodemask(). The commit log says it's so "we can use a
single exit path within the function" but that's clearly wrong. We can
still do that when doing mpol_cond_put() after the allocation attempt.
Make sure the mempolicy is not freed prematurely, otherwise
__alloc_pages_nodemask() can end up using a bogus nodemask, which could
lead e.g. to premature OOM.
Fixes:
be97a41b291e ("mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma")
Link: http://lkml.kernel.org/r/20170118141124.8345-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 24 Jan 2017 23:18:16 +0000 (15:18 -0800)]
radix-tree: fix private list warnings
The newly introduced warning in radix_tree_free_nodes() was testing the
wrong variable; it should have been 'old' instead of 'node'.
Fixes:
ea07b862ac8e ("mm: workingset: fix use-after-free in shadow node shrinker")
Link: http://lkml.kernel.org/r/20170118163746.GA32495@cmpxchg.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Tue, 24 Jan 2017 23:18:13 +0000 (15:18 -0800)]
Documentation/filesystems/proc.txt: add VmPin
Commit
bc3e53f682d9 ("mm: distinguish between mlocked and pinned pages")
added VmPin in /proc/<pid>/status. Report that in
Documentation/filesystems/proc.txt
Also move Umask after Name to keep correct order.
Link: http://lkml.kernel.org/r/20170114201219.30387-1-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Tue, 24 Jan 2017 23:18:10 +0000 (15:18 -0800)]
mm, memcg: do not retry precharge charges
When memory.move_charge_at_immigrate is enabled and precharges are
depleted during move, mem_cgroup_move_charge_pte_range() will attempt to
increase the size of the precharge.
Prevent precharges from ever looping by setting __GFP_NORETRY. This was
probably the intention of the GFP_KERNEL & ~__GFP_NORETRY, which is
pointless as written.
Fixes:
0029e19ebf84 ("mm: memcontrol: remove explicit OOM parameter in charge path")
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701130208510.69402@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Tue, 24 Jan 2017 23:18:07 +0000 (15:18 -0800)]
proc: add a schedule point in proc_pid_readdir()
We have seen proc_pid_readdir() invocations holding cpu for more than 50
ms. Add a cond_resched() to be gentle with other tasks.
[akpm@linux-foundation.org: coding style fix]
Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lucas Stach [Tue, 24 Jan 2017 23:18:05 +0000 (15:18 -0800)]
mm: alloc_contig: re-allow CMA to compact FS pages
Commit
73e64c51afc5 ("mm, compaction: allow compaction for GFP_NOFS
requests") changed compation to skip FS pages if not explicitly allowed
to touch them, but missed to update the CMA compact_control.
This leads to a very high isolation failure rate, crippling performance
of CMA even on a lightly loaded system. Re-allow CMA to compact FS
pages by setting the correct GFP flags, restoring CMA behavior and
performance to the kernel 4.9 level.
Fixes:
73e64c51afc5 (mm, compaction: allow compaction for GFP_NOFS requests)
Link: http://lkml.kernel.org/r/20170113115155.24335-1-l.stach@pengutronix.de
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Thompson [Tue, 24 Jan 2017 23:18:02 +0000 (15:18 -0800)]
mm/slub.c: trace free objects at KERN_INFO
Currently when trace is enabled (e.g. slub_debug=T,kmalloc-128 ) the
trace messages are mostly output at KERN_INFO. However the trace code
also calls print_section() to hexdump the head of a free object. This
is hard coded to use KERN_ERR, meaning the console is deluged with trace
messages even if we've asked for quiet.
Fix this the obvious way but adding a level parameter to
print_section(), allowing calls from the trace code to use the same
trace level as other trace messages.
Link: http://lkml.kernel.org/r/20170113154850.518-1-daniel.thompson@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Tue, 24 Jan 2017 23:17:59 +0000 (15:17 -0800)]
userfaultfd: fix SIGBUS resulting from false rwsem wakeups
With >=32 CPUs the userfaultfd selftest triggered a graceful but
unexpected SIGBUS because VM_FAULT_RETRY was returned by
handle_userfault() despite the UFFDIO_COPY wasn't completed.
This seems caused by rwsem waking the thread blocked in
handle_userfault() and we can't run up_read() before the wait_event
sequence is complete.
Keeping the wait_even sequence identical to the first one, would require
running userfaultfd_must_wait() again to know if the loop should be
repeated, and it would also require retaking the rwsem and revalidating
the whole vma status.
It seems simpler to wait the targeted wakeup so that if false wakeups
materialize we still wait for our specific wakeup event, unless of
course there are signals or the uffd was released.
Debug code collecting the stack trace of the wakeup showed this:
$ ./userfaultfd 100 99999
nr_pages: 25600, nr_pages_per_cpu: 800
bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2
bounces: 99997, mode: rnd ver poll, Bus error (core dumped)
save_stack_trace+0x2b/0x50
try_to_wake_up+0x2a6/0x580
wake_up_q+0x32/0x70
rwsem_wake+0xe0/0x120
call_rwsem_wake+0x1b/0x30
up_write+0x3b/0x40
vm_mmap_pgoff+0x9c/0xc0
SyS_mmap_pgoff+0x1a9/0x240
SyS_mmap+0x22/0x30
entry_SYSCALL_64_fastpath+0x1f/0xbd
0xffffffffffffffff
FAULT_FLAG_ALLOW_RETRY missing 70
CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xb8/0x112
handle_userfault+0x572/0x650
handle_mm_fault+0x12cb/0x1520
__do_page_fault+0x175/0x500
trace_do_page_fault+0x61/0x270
do_async_page_fault+0x19/0x90
async_page_fault+0x25/0x30
This always happens when the main userfault selftest thread is running
clone() while glibc runs either mprotect or mmap (both taking mmap_sem
down_write()) to allocate the thread stack of the background threads,
while locking/userfault threads already run at full throttle and are
susceptible to false wakeups that may cause handle_userfault() to return
before than expected (which results in graceful SIGBUS at the next
attempt).
This was reproduced only with >=32 CPUs because the loop to start the
thread where clone() is too quick with fewer CPUs, while with 32 CPUs
there's already significant activity on ~32 locking and userfault
threads when the last background threads are started with clone().
This >=32 CPUs SMP race condition is likely reproducible only with the
selftest because of the much heavier userfault load it generates if
compared to real apps.
We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a
patch floating around that provides it also hidden this problem but in
reality only is successfully at hiding the problem.
False wakeups could still happen again the second time
handle_userfault() is invoked, even if it's a so rare race condition
that getting false wakeups twice in a row is impossible to reproduce.
This full fix is needed for correctness, the only alternative would be
to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP
support can stick to a strict "one more" VM_FAULT_RETRY logic (no need
of returning it infinite times to avoid the SIGBUS).
Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 24 Jan 2017 23:17:56 +0000 (15:17 -0800)]
drivers/memstick/core/memstick.c: avoid -Wnonnull warning
gcc-7 produces a harmless false-postive warning about a possible NULL
pointer access:
drivers/memstick/core/memstick.c: In function 'h_memstick_read_dev_id':
drivers/memstick/core/memstick.c:309:3: error: argument 2 null where non-null expected [-Werror=nonnull]
memcpy(mrq->data, buf, mrq->data_len);
This can't happen because the caller sets the command to 'MS_TPC_READ_REG',
which causes the data direction to be 'READ' and the NULL pointer not
accessed.
As a simple workaround for the warning, we can pass a pointer to the
data that we actually want to read into. This is not needed here, but
also harmless, and lets the compiler know that the access is ok.
Link: http://lkml.kernel.org/r/20170111144143.548867-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don Zickus [Tue, 24 Jan 2017 23:17:53 +0000 (15:17 -0800)]
kernel/watchdog: prevent false hardlockup on overloaded system
On an overloaded system, it is possible that a change in the watchdog
threshold can be delayed long enough to trigger a false positive.
This can easily be achieved by having a cpu spinning indefinitely on a
task, while another cpu updates watchdog threshold.
What happens is while trying to park the watchdog threads, the hrtimers
on the other cpus trigger and reprogram themselves with the new slower
watchdog threshold. Meanwhile, the nmi watchdog is still programmed
with the old faster threshold.
Because the one cpu is blocked, it prevents the thread parking on the
other cpus from completing, which is needed to shutdown the nmi watchdog
and reprogram it correctly. As a result, a false positive from the nmi
watchdog is reported.
Fix this by setting a park_in_progress flag to block all lockups until
the parking is complete.
Fix provided by Ulrich Obergfell.
[akpm@linux-foundation.org: s/park_in_progress/watchdog_park_in_progress/]
Link: http://lkml.kernel.org/r/1481041033-192236-1-git-send-email-dzickus@redhat.com
Signed-off-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ross Zwisler [Tue, 24 Jan 2017 23:17:51 +0000 (15:17 -0800)]
dax: fix build warnings with FS_DAX and !FS_IOMAP
As reported by Arnd:
https://lkml.org/lkml/2017/1/10/756
Compiling with the following configuration:
# CONFIG_EXT2_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_FS_IOMAP depends on the above filesystems, as is not set
CONFIG_FS_DAX=y
generates build warnings about unused functions in fs/dax.c:
fs/dax.c:878:12: warning: `dax_insert_mapping' defined but not used [-Wunused-function]
static int dax_insert_mapping(struct address_space *mapping,
^~~~~~~~~~~~~~~~~~
fs/dax.c:572:12: warning: `copy_user_dax' defined but not used [-Wunused-function]
static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size,
^~~~~~~~~~~~~
fs/dax.c:542:12: warning: `dax_load_hole' defined but not used [-Wunused-function]
static int dax_load_hole(struct address_space *mapping, void **entry,
^~~~~~~~~~~~~
fs/dax.c:312:14: warning: `grab_mapping_entry' defined but not used [-Wunused-function]
static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
^~~~~~~~~~~~~~~~~~
Now that the struct buffer_head based DAX fault paths and I/O path have
been removed we really depend on iomap support being present for DAX.
Make this explicit by selecting FS_IOMAP if we compile in DAX support.
This allows us to remove conditional selections of FS_IOMAP when FS_DAX
was present for ext2 and ext4, and to remove an #ifdef in fs/dax.c.
Link: http://lkml.kernel.org/r/1484087383-29478-1-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keno Fischer [Tue, 24 Jan 2017 23:17:48 +0000 (15:17 -0800)]
mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp
In commit
19be0eaffa3a ("mm: remove gup_flags FOLL_WRITE games from
__get_user_pages()"), the mm code was changed from unsetting FOLL_WRITE
after a COW was resolved to setting the (newly introduced) FOLL_COW
instead. Simultaneously, the check in gup.c was updated to still allow
writes with FOLL_FORCE set if FOLL_COW had also been set.
However, a similar check in huge_memory.c was forgotten. As a result,
remote memory writes to ro regions of memory backed by transparent huge
pages cause an infinite loop in the kernel (handle_mm_fault sets
FOLL_COW and returns 0 causing a retry, but follow_trans_huge_pmd bails
out immidiately because `(flags & FOLL_WRITE) && !pmd_write(*pmd)` is
true.
While in this state the process is stil SIGKILLable, but little else
works (e.g. no ptrace attach, no other signals). This is easily
reproduced with the following code (assuming thp are set to always):
#include <assert.h>
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>
#define TEST_SIZE 5 * 1024 * 1024
int main(void) {
int status;
pid_t child;
int fd = open("/proc/self/mem", O_RDWR);
void *addr = mmap(NULL, TEST_SIZE, PROT_READ,
MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
assert(addr != MAP_FAILED);
pid_t parent_pid = getpid();
if ((child = fork()) == 0) {
void *addr2 = mmap(NULL, TEST_SIZE, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
assert(addr2 != MAP_FAILED);
memset(addr2, 'a', TEST_SIZE);
pwrite(fd, addr2, TEST_SIZE, (uintptr_t)addr);
return 0;
}
assert(child == waitpid(child, &status, 0));
assert(WIFEXITED(status) && WEXITSTATUS(status) == 0);
return 0;
}
Fix this by updating follow_trans_huge_pmd in huge_memory.c analogously
to the update in gup.c in the original commit. The same pattern exists
in follow_devmap_pmd. However, we should not be able to reach that
check with FOLL_COW set, so add WARN_ONCE to make sure we notice if we
ever do.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170106015025.GA38411@juliacomputing.com
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yasuaki Ishimatsu [Tue, 24 Jan 2017 23:17:45 +0000 (15:17 -0800)]
memory_hotplug: make zone_can_shift() return a boolean value
online_{kernel|movable} is used to change the memory zone to
ZONE_{NORMAL|MOVABLE} and online the memory.
To check that memory zone can be changed, zone_can_shift() is used.
Currently the function returns minus integer value, plus integer
value and 0. When the function returns minus or plus integer value,
it means that the memory zone can be changed to ZONE_{NORNAL|MOVABLE}.
But when the function returns 0, there are two meanings.
One of the meanings is that the memory zone does not need to be changed.
For example, when memory is in ZONE_NORMAL and onlined by online_kernel
the memory zone does not need to be changed.
Another meaning is that the memory zone cannot be changed. When memory
is in ZONE_NORMAL and onlined by online_movable, the memory zone may
not be changed to ZONE_MOVALBE due to memory online limitation(see
Documentation/memory-hotplug.txt). In this case, memory must not be
onlined.
The patch changes the return type of zone_can_shift() so that memory
online operation fails when memory zone cannot be changed as follows:
Before applying patch:
# grep -A 35 "Node 2" /proc/zoneinfo
Node 2, zone Normal
<snip>
node_scanned 0
spanned
8388608
present
7864320
managed
7864320
# echo online_movable > memory4097/state
# grep -A 35 "Node 2" /proc/zoneinfo
Node 2, zone Normal
<snip>
node_scanned 0
spanned
8388608
present
8388608
managed
8388608
online_movable operation succeeded. But memory is onlined as
ZONE_NORMAL, not ZONE_MOVABLE.
After applying patch:
# grep -A 35 "Node 2" /proc/zoneinfo
Node 2, zone Normal
<snip>
node_scanned 0
spanned
8388608
present
7864320
managed
7864320
# echo online_movable > memory4097/state
bash: echo: write error: Invalid argument
# grep -A 35 "Node 2" /proc/zoneinfo
Node 2, zone Normal
<snip>
node_scanned 0
spanned
8388608
present
7864320
managed
7864320
online_movable operation failed because of failure of changing
the memory zone from ZONE_NORMAL to ZONE_MOVABLE
Fixes:
df429ac03936 ("memory-hotplug: more general validation of zone during online")
Link: http://lkml.kernel.org/r/2f9c3837-33d7-b6e5-59c0-6ca4372b2d84@gmail.com
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Deacon [Fri, 20 Jan 2017 10:33:32 +0000 (10:33 +0000)]
vring: Force use of DMA API for ARM-based systems with legacy devices
Booting Linux on an ARM fastmodel containing an SMMU emulation results
in an unexpected I/O page fault from the legacy virtio-blk PCI device:
[ 1.211721] arm-smmu-v3
2b400000.smmu: event 0x10 received:
[ 1.211800] arm-smmu-v3
2b400000.smmu: 0x00000000fffff010
[ 1.211880] arm-smmu-v3
2b400000.smmu: 0x0000020800000000
[ 1.211959] arm-smmu-v3
2b400000.smmu: 0x00000008fa081002
[ 1.212075] arm-smmu-v3
2b400000.smmu: 0x0000000000000000
[ 1.212155] arm-smmu-v3
2b400000.smmu: event 0x10 received:
[ 1.212234] arm-smmu-v3
2b400000.smmu: 0x00000000fffff010
[ 1.212314] arm-smmu-v3
2b400000.smmu: 0x0000020800000000
[ 1.212394] arm-smmu-v3
2b400000.smmu: 0x00000008fa081000
[ 1.212471] arm-smmu-v3
2b400000.smmu: 0x0000000000000000
<system hangs failing to read partition table>
This is because the legacy virtio-blk device is behind an SMMU, so we
have consequently swizzled its DMA ops and configured the SMMU to
translate accesses. This then requires the vring code to use the DMA API
to establish translations, otherwise all transactions will result in
fatal faults and termination.
Given that ARM-based systems only see an SMMU if one is really present
(the topology is all described by firmware tables such as device-tree or
IORT), then we can safely use the DMA API for all legacy virtio devices.
Modern devices can advertise the prescense of an IOMMU using the
VIRTIO_F_IOMMU_PLATFORM feature flag.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes:
876945dbf649 ("arm64: Hook up IOMMU dma_ops")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Robin Murphy [Tue, 10 Jan 2017 17:51:17 +0000 (17:51 +0000)]
virtio_mmio: Set DMA masks appropriately
Once DMA API usage is enabled, it becomes apparent that virtio-mmio is
inadvertently relying on the default 32-bit DMA mask, which leads to
problems like rapidly exhausting SWIOTLB bounce buffers.
Ensure that we set the appropriate 64-bit DMA mask whenever possible,
with the coherent mask suitably limited for the legacy vring as per
a0be1db4304f ("virtio_pci: Limit DMA mask to 44 bits for legacy virtio
devices").
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Fixes:
b42111382f0e ("virtio_mmio: Use the DMA API if enabled")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Hajnoczi [Thu, 19 Jan 2017 10:43:53 +0000 (10:43 +0000)]
vhost/vsock: handle vhost_vq_init_access() error
Propagate the error when vhost_vq_init_access() fails and set
vq->private_data to NULL.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log