git.stricted.de - GitHub/moto-9609/android_kernel_motorola

net/ncsi: Fix stale link state of inactive channels on failover

The issue was found on BCM5718 which has two NCSI channels in one
package: C0 and C1. Both of them are connected to different LANs,
means they are in link-up state and C0 is chosen as the active one
until resetting BCM5718 happens as below.

Resetting BCM5718 results in LSC (Link State Change) AEN packet
received on C0, meaning LSC AEN is missed on C1. When LSC AEN packet
received on C0 to report link-down, it fails over to C1 because C1
is in link-up state as software can see. However, C1 is in link-down
state in hardware. It means the link state is out of synchronization
between hardware and software, resulting in inappropriate channel (C1)
selected as active one.

This resolves the issue by sending separate GLS (Get Link Status)
commands to all channels in the package before trying to do failover.
The last link states of all channels in the package are retrieved.
With it, C0 (not C1) is selected as active one as expected.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ncsi: Avoid if statements in ncsi_suspend_channel()

There are several if/else statements in the state machine implemented
by switch/case in ncsi_suspend_channel() to avoid duplicated code. It
makes the code a bit hard to be understood.

This drops if/else statements in ncsi_suspend_channel() to improve the
code readability as Joel Stanley suggested. Also, it becomes easy to
add more states in the state machine without affecting current code.
No logical changes introduced by this.

Suggested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_mirred: Use passed lastuse argument

stats_update callback is called by NIC drivers doing hardware
offloading of the mirred action. Lastuse is passed as argument
to specify when the stats was actually last updated and is not
always the current time.

Fixes: 9798e6fe4f9b ('net: act_mirred: allow statistic updates from offloaded actions')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: pci: Fix reset wait for SwitchX2

SwitchX2 firmware does not implement reset done yet. Moreover, when
busy-polled for ready magic, that slows down firmware and reset takes
longer than the defined timeout, causing initialization to fail.
So restore the previous behaviour and just sleep in this case.

Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: switchx2: Fix ethernet port initialization

When creating an ethernet port fails, we must move the port to disable,
otherwise putting the port in switch partition 0 (ETH) or 1 (IB) will
always fails.

Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support")
Signed-off-by: Elad Raz <eladr@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_router: Make mlxsw_sp_router_fib4_del return void and remove warn

The function return value is not checked anywhere. Also, the warning
causes huge slowdown when removing large number of FIB entries which
were not offloaded, because of ordering issue. Ido's preparing
a patchset to fix the ordering issue, but that is definitelly not
net tree material.

Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_router: Use correct tree index for binding

By a mistake, there is tree index 0 passed to RALTB. Should be
MLXSW_SP_LPM_TREE_MIN.

Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls")
Reported-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: fix and review the ptp registration.

The commit commit 7086605a6ab5 ("stmmac: fix error check when init ptp")
breaks the procedure added by the
commit efee95f42b5d ("ptp_clock: future-proofing drivers against PTP
subsystem becoming optional")

So this patch tries to re-import the logic added by the latest
commit above: it makes sense to have the stmmac_ptp_register
as void function and, inside the main, the stmmac_init_ptp can fails
in case of the capability cannot be supported by the HW.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nicolas Pitre <nico@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: do not export sysctl_tcp_low_latency

Since commit b2fb4f54ecd4 ("tcp: uninline tcp_prequeue()") we no longer
access sysctl_tcp_low_latency from a module.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnetlink: Add rtnexthop offload flag to compare mask

The offload flag is a status flag and should not be used by
FIB semantics for comparison.

Fixes: 37ed9493699c ("rtnetlink: add RTNH_F_EXTERNAL flag for fib offload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

switchdev: Execute bridge ndos only for bridge ports

We recently got the following warning after setting up a vlan device on
top of an offloaded bridge and executing 'bridge link':

WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum]
[...]
CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
  0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3
  0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b
  0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990
Call Trace:
  [<ffffffff8135eaa3>] dump_stack+0x63/0x90
  [<ffffffff8108c43b>] __warn+0xcb/0xf0
  [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20
  [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum]
  [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum]
  [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140
  [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140
  [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140
  [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0
  [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90
  [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190
  [<ffffffff8161a1b2>] netlink_dump+0x122/0x290
  [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190
  [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230
  [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220
  [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0
  [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230
  [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890
  [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0
  [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30
  [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240
  [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0
  [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50
  [<ffffffff815c6031>] SYSC_sendto+0x101/0x190
  [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90
  [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10
  [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4

The problem is that the 8021q module propagates the call to
ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't
recognize the netdev, as it's not offloaded.

While we can ignore calls being made to non-bridge ports inside the
driver, a better fix would be to push this check up to the switchdev
layer.

Note that these ndos can be called for non-bridged netdev, but this only
happens in certain PF drivers which don't call the corresponding
switchdev functions anyway.

Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Tamir Winetroub <tamirw@mellanox.com>
Tested-by: Tamir Winetroub <tamirw@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: core: Correctly iterate over lower adjacency list

Tamir reported the following trace when processing ARP requests received
via a vlan device on top of a VLAN-aware bridge:

NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [swapper/1:0]
[...]
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W       4.8.0-rc7 #1
Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016
task: ffff88017edfea40 task.stack: ffff88017ee10000
RIP: 0010:[<ffffffff815dcc73>]  [<ffffffff815dcc73>] netdev_all_lower_get_next_rcu+0x33/0x60
[...]
Call Trace:
  <IRQ>
  [<ffffffffa015de0a>] mlxsw_sp_port_lower_dev_hold+0x5a/0xa0 [mlxsw_spectrum]
  [<ffffffffa016f1b0>] mlxsw_sp_router_netevent_event+0x80/0x150 [mlxsw_spectrum]
  [<ffffffff810ad07a>] notifier_call_chain+0x4a/0x70
  [<ffffffff810ad13a>] atomic_notifier_call_chain+0x1a/0x20
  [<ffffffff815ee77b>] call_netevent_notifiers+0x1b/0x20
  [<ffffffff815f2eb6>] neigh_update+0x306/0x740
  [<ffffffff815f38ce>] neigh_event_ns+0x4e/0xb0
  [<ffffffff8165ea3f>] arp_process+0x66f/0x700
  [<ffffffff8170214c>] ? common_interrupt+0x8c/0x8c
  [<ffffffff8165ec29>] arp_rcv+0x139/0x1d0
  [<ffffffff816e505a>] ? vlan_do_receive+0xda/0x320
  [<ffffffff815e3794>] __netif_receive_skb_core+0x524/0xab0
  [<ffffffff815e6830>] ? dev_queue_xmit+0x10/0x20
  [<ffffffffa06d612d>] ? br_forward_finish+0x3d/0xc0 [bridge]
  [<ffffffffa06e5796>] ? br_handle_vlan+0xf6/0x1b0 [bridge]
  [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60
  [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0
  [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70
  [<ffffffffa06d7856>] br_pass_frame_up+0xc6/0x160 [bridge]
  [<ffffffffa06d63d7>] ? deliver_clone+0x37/0x50 [bridge]
  [<ffffffffa06d656c>] ? br_flood+0xcc/0x160 [bridge]
  [<ffffffffa06d7b14>] br_handle_frame_finish+0x224/0x4f0 [bridge]
  [<ffffffffa06d7f94>] br_handle_frame+0x174/0x300 [bridge]
  [<ffffffff815e3599>] __netif_receive_skb_core+0x329/0xab0
  [<ffffffff81374815>] ? find_next_bit+0x15/0x20
  [<ffffffff8135e802>] ? cpumask_next_and+0x32/0x50
  [<ffffffff810c9968>] ? load_balance+0x178/0x9b0
  [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60
  [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0
  [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70
  [<ffffffffa01544a1>] mlxsw_sp_rx_listener_func+0x61/0xb0 [mlxsw_spectrum]
  [<ffffffffa005c9f7>] mlxsw_core_skb_receive+0x187/0x200 [mlxsw_core]
  [<ffffffffa007332a>] mlxsw_pci_cq_tasklet+0x63a/0x9b0 [mlxsw_pci]
  [<ffffffff81091986>] tasklet_action+0xf6/0x110
  [<ffffffff81704556>] __do_softirq+0xf6/0x280
  [<ffffffff8109213f>] irq_exit+0xdf/0xf0
  [<ffffffff817042b4>] do_IRQ+0x54/0xd0
  [<ffffffff8170214c>] common_interrupt+0x8c/0x8c

The problem is that netdev_all_lower_get_next_rcu() never advances the
iterator, thereby causing the loop over the lower adjacency list to run
forever.

Fix this by advancing the iterator and avoid the infinite loop.

Fixes: 7ce856aaaf13 ("mlxsw: spectrum: Add couple of lower device helper functions")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Tamir Winetroub <tamirw@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

flow_dissector: Check skb for VLAN only if skb specified.

Fixes a panic when calling eth_get_headlen(). Noticed on i40e driver.

Fixes: d5709f7ab776 ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci")
Signed-off-by: Eric Garver <e@erig.me>
Reviewed-by: Jakub Sitnicki <jkbs@redhat.com>
Acked-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Use list_move_tail instead of list_del/list_add_tail

Using list_move_tail() instead of list_del() + list_add_tail().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rocker: fix maybe-uninitialized warning

In some rare configurations, we get a warning about the 'index' variable
being used without an initialization:

drivers/net/ethernet/rocker/rocker_ofdpa.c: In function ‘ofdpa_port_fib_ipv4.isra.16.constprop’:
drivers/net/ethernet/rocker/rocker_ofdpa.c:2425:92: warning: ‘index’ may be used uninitialized in this function [-Wmaybe-uninitialized]

This is a false positive, the logic is just a bit too complex for gcc
to follow here. Moving the intialization of 'index' a little further
down makes it clear to gcc that the function always returns an error
if it is not initialized.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/hyperv: avoid uninitialized variable

The hdr_offset variable is only if we deal with a TCP or UDP packet,
but as the check surrounding its usage tests for skb_is_gso()
instead, the compiler has no idea if the variable is initialized
or not at that point:

drivers/net/hyperv/netvsc_drv.c: In function ‘netvsc_start_xmit’:
drivers/net/hyperv/netvsc_drv.c:494:42: error: ‘hdr_offset’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

This adds an additional check for the transport type, which
tells the compiler that this path cannot happen. Since the
get_net_transport_info() function should always be inlined
here, I don't expect this to result in additional runtime
checks.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcm63xx: avoid referencing uninitialized variable

gcc found a reference to an uninitialized variable in the error handling
of bcm_enet_open, introduced by a recent cleanup:

drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open'
drivers/net/ethernet/broadcom/bcm63xx_enet.c:1129:2: warning: 'phydev' may be used uninitialized in this function [-Wmaybe-uninitialized]

This makes the use of that variable conditional, so we only reference it
here after it has been used before. Unlike my normal patches, I have not
build-tested this one, as I don't currently have mips test in my
randconfig setup.

Fixes: 625eb8667d6f ("net: ethernet: broadcom: bcm63xx: use phydev from struct net_device")
Cc: Philippe Reynes <tremyfr@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

soreuseport: do not export reuseport_add_sock()

reuseport_add_sock() is not used from a module,
no need to export it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Update MTU after device initialization

It is possible for the MTU to be changed during the initialization
process with the VNIC Server. Ensure that the net device is updated
to reflect the new MTU.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix GFP_KERNEL allocation in interrupt context

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Driver Version 1.0.1

Increment driver version to reflect features that have
been added since release.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: multicast: restore perm router ports on multicast enable

Satish reported a problem with the perm multicast router ports not getting
reenabled after some series of events, in particular if it happens that the
multicast snooping has been disabled and the port goes to disabled state
then it will be deleted from the router port list, but if it moves into
non-disabled state it will not be re-added because the mcast snooping is
still disabled, and enabling snooping later does nothing.

Here are the steps to reproduce, setup br0 with snooping enabled and eth1
added as a perm router (multicast_router = 2):
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show
<empty>

At this point we have mcast enabled and eth1 as a perm router (value = 2)
but it is not in the router list which is incorrect.

After this change:
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show
router ports on br0: eth1

Note: we can directly do br_multicast_enable_port for all because the
querier timer already has checks for the port state and will simply
expire if it's in blocking/disabled. See the comment added by
commit 9aa66382163e7 ("bridge: multicast: add a comment to
br_port_state_selection about blocking state")

Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle")
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Remove unused but set variable

Remove the unused but set variable icsk in listening_get_next to fix the
following GCC warning when building with 'W=1':

net/ipv4/tcp_ipv4.c: In function ‘listening_get_next’:
net/ipv4/tcp_ipv4.c:1890:31: warning: variable ‘icsk’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: Fix number of queue sets corssing the limit

Do not let number of offload queue sets to go more than
MAX_OFLD_QSETS, which would otherwise crash the driver
on machines with cores more than MAX_OFLD_QSETS.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Remove unused but set variable

Remove the unused but set variable dev in ip_do_fragment to fix the
following GCC warning when building with 'W=1':

net/ipv4/ip_output.c: In function ‘ip_do_fragment’:
net/ipv4/ip_output.c:541:21: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

dwc_eth_qos: enable flow control by default

Allow autoneg to enable flow control by default.
The behavior when autoneg is off has not changed.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dwc_eth_qos: do not clear pause flags from phy_device->supported

phy_device->supported is originally set by the PHY driver.
The ethernet driver should filter phy_device->supported to only contain
flags supported by the IP.
The IP supports setting rx and tx flow control independently,
therefore SUPPORTED_Pause and SUPPORTED_Asym_Pause should not be cleared.
If the flags are cleared, pause frames cannot be enabled (even if they
are supported by the PHY).

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/hsr: Remove unused but set variable

Remove the unused but set variable master_dev in check_local_dest to fix
the following GCC warning when building with 'W=1':

net/hsr/hsr_forward.c: In function ‘check_local_dest’:
net/hsr/hsr_forward.c:303:21: warning: variable ‘master_dev’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2016-10-18' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
This is relatively small, mostly to get the SG/crypto
from stack removal fix that crashes things when VMAP
stack is used in conjunction with software crypto.

Aside from that, we have:
* a fix for AP_VLAN usage with the nl80211 frame command
* two fixes (and two preparation patches) for A-MSDU, one
   to discard group-addressed (multicast) and unexpected
   4-address A-MSDUs, the other to validate A-MSDU inner
   MAC addresses properly to prevent controlled port bypass
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2: fix locking when netconsole is used

Functions bnx2_reg_rd_ind(), bnx2_reg_wr_ind() and bnx2_ctx_wr()
can be called with IRQs disabled when netconsole is enabled. So they
should use spin_{,un}lock_irq{save,restore} instead of _bh variants.

Example call flow:
bnx2_poll()
  ->bnx2_poll_link()
    ->bnx2_phy_int()
      ->bnx2_set_remote_link()
        ->bnx2_shmem_rd()
          ->bnx2_reg_rd_ind()
            -> spin_lock_bh(&bp->indirect_lock);
               spin_unlock_bh(&bp->indirect_lock);
               ...
               -> __local_bh_enable_ip

static inline void __local_bh_enable_ip(unsigned long ip)
      WARN_ON_ONCE(in_irq() || irqs_disabled());   <<<<<< WARN

Cc: Sony Chacko <sony.chacko@qlogic.com>
Cc: Dept-HSGLinuxNICDev@qlogic.com
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-driver-autoload'

Javier Martinez Canillas says:

====================
net: Fix module autoload for several platform drivers

I noticed that module autoload won't be working in a bunch of platform
drivers in the net subsystem and this patch series contains the fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: bcm_sf2: Fix module autoload for OF registration

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias
alias:          platform:brcm-sf2

After this patch:

$ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias
alias:          platform:brcm-sf2
alias:          of:N*T*Cbrcm,bcm7445-switch-v4.0C*
alias:          of:N*T*Cbrcm,bcm7445-switch-v4.0

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Fix module autoload

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/net/dsa/b53/b53_mmap.ko  | grep alias
$

After this patch:

$ modinfo drivers/net/dsa/b53/b53_mmap.ko  | grep alias
alias:          of:N*T*Cbrcm,bcm63xx-switchC*
alias:          of:N*T*Cbrcm,bcm63xx-switch
alias:          of:N*T*Cbrcm,bcm6368-switchC*
alias:          of:N*T*Cbrcm,bcm6368-switch
alias:          of:N*T*Cbrcm,bcm6328-switchC*
alias:          of:N*T*Cbrcm,bcm6328-switch
alias:          of:N*T*Cbrcm,bcm3384-switchC*
alias:          of:N*T*Cbrcm,bcm3384-switch

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hisilicon: Fix hns_mdio module autoload for OF registration

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/net/ethernet/hisilicon//hns_mdio.ko | grep alias
alias:          platform:Hi-HNS_MDIO
alias:          acpi*:HISI0141:*

After this patch:

$ modinfo drivers/net/ethernet/hisilicon//hns_mdio.ko | grep alias
alias:          platform:Hi-HNS_MDIO
alias:          of:N*T*Chisilicon,hns-mdioC*
alias:          of:N*T*Chisilicon,hns-mdio
alias:          of:N*T*Chisilicon,mdioC*
alias:          of:N*T*Chisilicon,mdio
alias:          acpi*:HISI0141:*

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qcom/emac: Fix module autoload for OF registration

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias
alias:          platform:qcom-emac

After this patch:

$ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias
alias:          platform:qcom-emac
alias:          of:N*T*Cqcom,fsm9900-emacC*
alias:          of:N*T*Cqcom,fsm9900-emac

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: Fix hns_dsaf module autoload for OF registration

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko | grep alias
alias:          acpi*:HISI00B2:*
alias:          acpi*:HISI00B1:*

After this patch:

$ modinfo drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko | grep alias
alias:          acpi*:HISI00B2:*
alias:          acpi*:HISI00B1:*
alias:          of:N*T*Chisilicon,hns-dsaf-v2C*
alias:          of:N*T*Chisilicon,hns-dsaf-v2
alias:          of:N*T*Chisilicon,hns-dsaf-v1C*
alias:          of:N*T*Chisilicon,hns-dsaf-v1

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: nb8800: Fix module autoload

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ $ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias
$

After this patch:

$ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias
alias:          of:N*T*Csigma,smp8734-ethernetC*
alias:          of:N*T*Csigma,smp8734-ethernet
alias:          of:N*T*Csigma,smp8642-ethernetC*
alias:          of:N*T*Csigma,smp8642-ethernet
alias:          of:N*T*Caurora,nb8800C*
alias:          of:N*T*Caurora,nb8800

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: nps_enet: Fix module autoload

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias
$

After this patch:

$ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias
alias: of:N*T*Cezchip,nps-mgt-enetC*
alias: of:N*T*Cezchip,nps-mgt-enet

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: fix memory leak of qe on error exit path

A memory leak of qe occurs when t4_sched_queue_unbind fails,
so fix this by free'ing qe on the error exit path.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: pktgen: remove rcu locking in pktgen_change_name()

After Jesper commit back in linux-3.18, we trigger a lockdep
splat in proc_create_data() while allocating memory from
pktgen_change_name().

This patch converts t->if_lock to a mutex, since it is now only
used from control path, and adds proper locking to pktgen_change_name()

1) pktgen_thread_lock to protect the outer loop (iterating threads)
2) t->if_lock to protect the inner loop (iterating devices)

Note that before Jesper patch, pktgen_change_name() was lacking proper
protection, but lockdep was not able to detect the problem.

Fixes: 8788370a1d4b ("pktgen: RCU-ify "if_list" to remove lock in next_to_run()")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Require exact match for TCP socket lookups if dif is l3mdev

Currently, socket lookups for l3mdev (vrf) use cases can match a socket
that is bound to a port but not a device (ie., a global socket). If the
sysctl tcp_l3mdev_accept is not set this leads to ack packets going out
based on the main table even though the packet came in from an L3 domain.
The end result is that the connection does not establish creating
confusion for users since the service is running and a socket shows in
ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the
skb came through an interface enslaved to an l3mdev device and the
tcp_l3mdev_accept is not set.

skb's through an l3mdev interface are marked by setting a flag in
inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the
flag for IPv4. Using an skb flag avoids a device lookup on the dif. The
flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the
inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the
match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the
move is done after the socket lookup, so IP6CB is used.

The flags field in inet_skb_parm struct needs to be increased to add
another flag. There is currently a 1-byte hole following the flags,
so it can be expanded to u16 without increasing the size of the struct.

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: move struct aead_req off the stack

Some crypto implementations (such as the generic CCM wrapper in crypto/)
use scatterlists to map fields of private data in their struct aead_req.
This means these data structures cannot live in the vmalloc area, which
means that they cannot live on the stack (with CONFIG_VMAP_STACK.)

This currently occurs only with the generic software implementation, but
the private data and usage is implementation specific, so move the whole
data structures off the stack into heap by allocating every time we need
to use them.

In addition, take care not to put any of our own stack allocations into
scatterlists. This involves reserving some extra room when allocating the
aead_request structures, and referring to those allocations in the scatter-
lists (while copying the data from the stack before the crypto operation)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

vmxnet3: avoid assumption about invalid dma_pa in vmxnet3_set_mc()

vmxnet3_set_mc() checks new_table_pa returned by dma_map_single()
with dma_mapping_error(), but even there it assumes zero is invalid pa
(it assumes dma_mapping_error(...,0) returns true if new_table is NULL).

The patch adds an explicit variable to track status of new_table_pa.

Found by Linux Driver Verification project (linuxtesting.org).

v2: use "bool" and "true"/"false" for boolean variables.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: fix an error code in stmmac_ptp_register()

PTR_ERR(NULL) is success. We have to preserve the error code earlier.

Fixes: 7086605a6ab5 ("stmmac: fix error check when init ptp")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qcom/emac: disable interrupts before calling phy_disconnect

There is a race condition that can occur if EMAC interrupts are
enabled when phy_disconnect() is called.  phy_disconnect() sets
adjust_link to NULL.  When an interrupt occurs, the ISR might
call phy_mac_interrupt(), which wakes up the workqueue function
phy_state_machine().  This function might reference adjust_link,
thereby causing a null pointer exception.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: set coherent DMA mask as well as streaming DMA mask

PCI devices that are 64-bit DMA capable should set the coherent
DMA mask as well as the streaming DMA mask. On some architectures,
these are managed separately, and so the coherent DMA mask will be
left at its default value of 32 if it is not set explicitly. This
results in errors such as

     r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
     hwdev DMA mask = 0x00000000ffffffff, dev_addr = 0x00000080fbfff000
     swiotlb: coherent allocation failed for device 0000:02:00.0 size=4096
     CPU: 0 PID: 1062 Comm: systemd-udevd Not tainted 4.8.0+ #35
     Hardware name: AMD Seattle/Seattle, BIOS 10:53:24 Oct 13 2016

on systems without memory that is 32-bit addressable by PCI devices.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-10-14' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.9

wlcore

* fix a double free regression causing hard to track crashes

rtl8xxxu

* fix driver reload issues, a memory leak and an endian bug

rtlwifi

* fix a major regression introduced in 4.9 with firmware loading on
certain hardware

ath10k

* fix regression about broken cal_data debugfs file (since 4.7)

ath9k

* revert temperature compensation for AR9003+ devices, it was causing
too much problems

ath6kl

* add Dell OEM SDIO I/O for the Venue 8 Pro
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: asix: Avoid looping when the device does not respond

Check answers from USB stack and avoid re-sending the request
multiple times if the device does not respond.

This fixes the following problem, observed with a probably flaky adapter.

[62108.732707] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[62108.914421] usb 1-3: New USB device found, idVendor=0b95, idProduct=7720
[62108.914463] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[62108.914476] usb 1-3: Product: AX88x72A
[62108.914486] usb 1-3: Manufacturer: ASIX Elec. Corp.
[62108.914495] usb 1-3: SerialNumber: 000001
[62114.109109] asix 1-3:1.0 (unnamed net_device) (uninitialized):
Failed to write reg index 0x0000: -110
[62114.109139] asix 1-3:1.0 (unnamed net_device) (uninitialized):
Failed to send software reset: ffffff92
[62119.109048] asix 1-3:1.0 (unnamed net_device) (uninitialized):
Failed to write reg index 0x0000: -110
...

Since the USB timeout is 5 seconds, and the operation is retried 30 times,
this results in

[62278.180353] INFO: task mtpd:1725 blocked for more than 120 seconds.
[62278.180373]       Tainted: G        W      3.18.0-13298-g94ace9e #1
[62278.180383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
...
[62278.180957] kworker/2:0     D 0000000000000000     0  5744      2 0x00000000
[62278.180978] Workqueue: usb_hub_wq hub_event
[62278.181029]  ffff880177f833b8 0000000000000046 ffff88017fd00000 ffff88017b126d80
[62278.181048]  ffff880177f83fd8 ffff880065a71b60 0000000000013340 ffff880065a71b60
[62278.181065]  0000000000000286 0000000103b1c199 0000000000001388 0000000000000002
[62278.181081] Call Trace:
[62278.181092]  [<ffffffff8e0971fd>] ? console_conditional_schedule+0x2c/0x2c
[62278.181105]  [<ffffffff8e094f7b>] schedule+0x69/0x6b
[62278.181117]  [<ffffffff8e0972e0>] schedule_timeout+0xe3/0x11d
[62278.181133]  [<ffffffff8daadb1b>] ? trace_timer_start+0x51/0x51
[62278.181146]  [<ffffffff8e095a05>] do_wait_for_common+0x12f/0x16c
[62278.181162]  [<ffffffff8da856a7>] ? wake_up_process+0x39/0x39
[62278.181174]  [<ffffffff8e095aee>] wait_for_common+0x52/0x6d
[62278.181187]  [<ffffffff8e095b3b>] wait_for_completion_timeout+0x13/0x15
[62278.181201]  [<ffffffff8de676ce>] usb_start_wait_urb+0x93/0xf1
[62278.181214]  [<ffffffff8de6780d>] usb_control_msg+0xe1/0x11d
[62278.181230]  [<ffffffffc037d629>] usbnet_write_cmd+0x9c/0xc6 [usbnet]
[62278.181286]  [<ffffffffc03af793>] asix_write_cmd+0x4e/0x7e [asix]
[62278.181300]  [<ffffffffc03afb41>] asix_set_sw_mii+0x25/0x4e [asix]
[62278.181314]  [<ffffffffc03b001d>] asix_mdio_read+0x51/0x109 [asix]
...

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool: silence warning on bit loss

Sparse was complaining when we went to prototype some code
using ethtool_cmd_speed_set and SPEED_100000, which uses
the upper 16 bits of __u32 speed for the first time.

CHECK
...
.../uapi/linux/ethtool.h:123:28: warning:
cast truncates bits from constant value (186a0 becomes 86a0)

The warning is actually bogus, as no bits are really lost, but
we can get rid of the sparse warning with this one small change.

Reported-by: Preethi Banala <preethi.banala@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: fixup xdp tx irq to match rx

In cases where the number of tx rings is not a multiple of the number of
rx rings, the tx completion event will be handled on a different core
from the transmit and population of the ring. Races on the ring will
lead to a double-free of the page, and possibly other corruption.

The rings are initialized by default with a valid multiple of rings,
based on the number of cpus, therefore an invalid configuration requires
ethtool to change the ring layout. For instance 'ethtool -L eth0 rx 9 tx
8' will cause packets received on rx0, and XDP_TX'd to tx48, to be
completed on cpu3 (48 % 9 == 3).

Resolve this discrepancy by shifting the irq for the xdp tx queues to
start again from 0, modulo rx_ring_num.

Fixes: 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'qed-fixes'

Yuval Mintz says:

====================
qed: Fix dependencies and warnings series

The first patch in this series follows Dan Carpenter's reports about
Smatch warnings for recent qed additions and fixes those.

The second patch is the most significant one [and the reason this is
ntended for 'net'] - it's based on Arnd Bermann's suggestion for fixing
compilation issues that were introduced with the roce addition as a result
of certain combinations of qed, qede and qedr Kconfig options.

The third follows the discussion with Arnd and clears a lot of the warnings
that arise when compiling the drivers with "C=1".

Please consider applying this series to 'net'.
====================

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Additional work toward cleaning C=1

This cleans many of the warnings that would arise in qed as a
result of compilations with C=1; Most of those are the addition
of missing 'static' to functions, although there are several other
fixes as well.

Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed*: Fix Kconfig dependencies with INFINIBAND_QEDR

The qedr driver would require a tristate Kconfig option [to allow
it to compile as a module], and toward that end we've added the
INFINIBAND_QEDR option. But as we've made the compilation of the
qed/qede infrastructure required for RoCE dependent on the option
we'd be facing linking difficulties in case that QED=y or QEDE=y,
and INFINIBAND_QEDR=m.

To resolve this, we seperate between the INFINIBAND_QEDR option
and the infrastructure support in qed/qede by introducing a new
QED_RDMA option which would be selected by INFINIBAND_QEDR but would
be a boolean instead of a tristate; Following that, the qed/qede is
fixed based on this new option so that all config combinations would
be supported.

Fixes: cee9fbd8e2e9 ("qede: add qedr framework")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix static checker warning.

Smatch compains about qed_roce_ll2_tx() dereference
of the 'cdev' variable while testing its validity later.
As the validation checking is an over-kill [variable would always
be set], simply remove it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support")
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6: fix DESYNC_FACTOR

The IPv6 temporary address generation uses a variable called DESYNC_FACTOR
to prevent hosts updating the addresses at the same time. Quoting RFC 4941:

   ... The value DESYNC_FACTOR is a random value (different for each
   client) that ensures that clients don't synchronize with each other and
   generate new addresses at exactly the same time ...

DESYNC_FACTOR is defined as:

   DESYNC_FACTOR -- A random value within the range 0 - MAX_DESYNC_FACTOR.
   It is computed once at system start (rather than each time it is used)
   and must never be greater than (TEMP_VALID_LIFETIME - REGEN_ADVANCE).

First, I believe the RFC has a typo in it and meant to say: "and must
never be greater than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE)"

The reason is that at various places in the RFC, DESYNC_FACTOR is used in
a calculation like (TEMP_PREFERRED_LIFETIME - DESYNC_FACTOR) or
(TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE - DESYNC_FACTOR). It needs to be
smaller than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE) for the result of
these calculations to be larger than zero. It's never used in a
calculation together with TEMP_VALID_LIFETIME.

I already submitted an errata to the rfc-editor:
https://www.rfc-editor.org/errata_search.php?rfc=4941

The Linux implementation of DESYNC_FACTOR is very wrong:
max_desync_factor is used in places DESYNC_FACTOR should be used.
max_desync_factor is initialized to the RFC-recommended value for
MAX_DESYNC_FACTOR (600) but the whole point is to get a _random_ value.

And nothing ensures that the value used is not greater than
(TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE), which leads to underflows.  The
effect can easily be observed when setting the temp_prefered_lft sysctl
e.g. to 60. The preferred lifetime of the temporary addresses will be
bogus.

TEMP_PREFERRED_LIFETIME and REGEN_ADVANCE are not constants and can be
influenced by these three sysctls: regen_max_retry, dad_transmits and
temp_prefered_lft. Thus, the upper bound for desync_factor needs to be
re-calculated each time a new address is generated and if desync_factor is
larger than the new upper bound, a new random value needs to be
re-generated.

And since we already have max_desync_factor configurable per interface, we
also need to calculate and store desync_factor per interface.

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6: Drop the temporary address regen_timer

The randomized interface identifier (rndid) was periodically updated from
the regen_timer timer. Simplify the code by updating the rndid only when
needed by ipv6_try_regen_rndid().

This makes the follow-up DESYNC_FACTOR fix much simpler. Also it fixes a
reference counting error in this error path, where an in6_dev_put was
missing:
err = addrconf_sysctl_register(ndev);
if (err) {
ipv6_mc_destroy_dev(ndev);
- del_timer(&ndev->regen_timer);
snmp6_unregister_dev(ndev);
goto err_release;

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

IB/ipoib: move back IB LL address into the hard header

After the commit 9207f9d45b0a ("net: preserve IP control block
during GSO segmentation"), the GSO CB and the IPoIB CB conflict.
That destroy the IPoIB address information cached there,
causing a severe performance regression, as better described here:

http://marc.info/?l=linux-kernel&m=146787279825501&w=2

This change moves the data cached by the IPoIB driver from the
skb control lock into the IPoIB hard header, as done before
the commit 936d7de3d736 ("IPoIB: Stop lying about hard_header_len
and use skb->cb to stash LL addresses").
In order to avoid GRO issue, on packet reception, the IPoIB driver
stash into the skb a dummy pseudo header, so that the received
packets have actually a hard header matching the declared length.
To avoid changing the connected mode maximum mtu, the allocated
head buffer size is increased by the pseudo header length.

After this commit, IPoIB performances are back to pre-regression
value.

v2 -> v3: rebased
v1 -> v2: avoid changing the max mtu, increasing the head buf size

Fixes: 9207f9d45b0a ("net: preserve IP control block during GSO segmentation")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'rxrpc-rewrite-20161013' of git://git./linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Fixes

This set of patches contains a bunch of fixes:

(1) Fix use of kunmap() after change from kunmap_atomic() within AFS.

(2) Don't use of ERR_PTR() with an always zero value.

(3) Check the right error when using ip6_route_output().

(4) Be consistent about whether call->operation_ID is BE or CPU-E within
AFS.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking: update git urls to use https over http

This fixes the following errors when trying to clone the urls:

Cloning into 'net'...
fatal: repository 'http://git.kernel.org/cgit/linux/kernel/git/davem/net.git/' not found
Cloning into 'net-next'...
fatal: repository 'http://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/' not found
Cloning into 'linux'...
fatal: repository 'http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/' not found
Cloning into 'stable-queue'...
fatal: repository 'http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git/' not found

Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wan: slic_ds26522: Allow driver to built if COMPILE_TEST is enabled

The driver only has runtime but no build time dependency with FSL_SOC ||
ARCH_MXC || ARCH_LAYERSCAPE. So it can be built for testing purposes if
the COMPILE_TEST option is enabled.

This is useful to have more build coverage and make sure that the driver
is not affected by changes that could cause build regressions.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wan: slic_ds26522: Export OF module alias information

When the device is registered via OF, the OF table is used to match the
driver instead of the SPI device ID table, but the entries in the later
are used as aliasses to load the module if the driver was not built-in.

This is because the SPI core always reports an SPI module alias instead
of an OF one, but that could change so it's better to always export it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wan: slic_ds26522: add SPI device ID table to fix module autoload

If the driver is built as a module, module alias information isn't filled
so the module won't be autoloaded. Add a SPI device ID table and use the
MODULE_DEVICE_TABLE() macro so the information is exported in the module.

Before this patch:

$ modinfo drivers/net/wan/slic_ds26522.ko | grep alias
$

After this patch:

$ modinfo drivers/net/wan/slic_ds26522.ko | grep alias
alias: spi:ds26522

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: correctly add local routes when lo goes up

The goal of the patch is to fix this scenario:
ip link add dummy1 type dummy
ip link set dummy1 up
ip link set lo down ; ip link set lo up

After that sequence, the local route to the link layer address of dummy1 is
not there anymore.

When the loopback is set down, all local routes are deleted by
addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still
exists, because the corresponding idev has a reference on it. After the rcu
grace period, dst_rcu_free() is called, and thus ___dst_free(), which will
set obsolete to DST_OBSOLETE_DEAD.

In this case, init_loopback() is called before dst_rcu_free(), thus
obsolete is still sets to something <= 0. So, the function doesn't add the
route again. To avoid that race, let's check the rt6 refcnt instead.

Fixes: 25fb6ca4ed9c ("net IPv6 : Fix broken IPv6 routing table after loopback down-up")
Fixes: a881ae1f625c ("ipv6: don't call addrconf_dst_alloc again when enable lo")
Fixes: 33d99113b110 ("ipv6: reallocate addrconf router for ipv6 address when lo device up")
Reported-by: Francesco Santoro <francesco.santoro@6wind.com>
Reported-by: Samuel Gauthier <samuel.gauthier@6wind.com>
CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com>
CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com>
CC: Sabrina Dubroca <sd@queasysnail.net>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
CC: Weilong Chen <chenweilong@huawei.com>
CC: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_tunnel: fix ip6_tnl_lookup

The commit ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel
endpoints.") introduces support for wildcards in tunnels endpoints,
but in some rare circumstances ip6_tnl_lookup selects wrong tunnel
interface relying only on source or destination address of the packet
and not checking presence of wildcard in tunnels endpoints. Later in
ip6_tnl_rcv this packets can be dicarded because of difference in
ipproto even if fallback device have proper ipproto configuration.

This patch adds checks of wildcard endpoint in tunnel avoiding such
behavior

Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Signed-off-by: Vadim Fedorenko <junk@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix various build warnings in tlan/qed/xen-netback drivers, from
    Arnd Bergmann.

2) Propagate proper error code in strparser's strp_recv(), from Geert
    Uytterhoeven.

3) Fix accidental broadcast of RTM_GETTFILTER responses, from Eric
    Dumazret.

4) Need to use list_for_each_entry_safe() in qed driver, from Wei
    Yongjun.

5) Openvswitch 802.1AD bug fixes from Jiri Benc.

6) Cure BUILD_BUG_ON() in mlx5 driver, from Tom Herbert.

7) Fix UDP ipv6 checksumming in netvsc driver, from Stephen Hemminger.

8) stmmac driver fixes from Giuseppe CAVALLARO.

9) Fix access to mangled IP6CB in tcp, from Eric Dumazet.

10) Fix info leaks in tipc and rtnetlink, from Dan Carpenter.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  net: bridge: add the multicast_flood flag attribute to brport_attrs
  net: axienet: Remove unused parameter from __axienet_device_reset
  liquidio: CN23XX: fix a loop timeout
  net: rtnl: info leak in rtnl_fill_vfinfo()
  tipc: info leak in __tipc_nl_add_udp_addr()
  net: ipv4: Do not drop to make_route if oif is l3mdev
  net: phy: Trigger state machine on state change and not polling.
  ipv6: tcp: restore IP6CB for pktoptions skbs
  netvsc: Remove mistaken udp.h inclusion.
  xen-netback: fix type mismatch warning
  stmmac: fix error check when init ptp
  stmmac: fix ptp init for gmac4
  qed: fix old-style function definition
  netvsc: fix checksum on UDP IPV6
  net_sched: reorder pernet ops and act ops registrations
  xen-netback: fix guest Rx stall detection (after guest Rx refactor)
  drivers/ptp: Fix kernel memory disclosure
  net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON
  qmi_wwan: add support for Quectel EC21 and EC25
  openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev
  ...

Merge tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client updates from Anna Schumaker:
"Highlights include:

  Stable bugfixes:
   - sunrpc: fix writ espace race causing stalls
   - NFS: Fix inode corruption in nfs_prime_dcache()
   - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation()
   - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid
   - NFSv4: Open state recovery must account for file permission changes
   - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic

  Features:
   - Add support for tracking multiple layout types with an ordered list
   - Add support for using multiple backchannel threads on the client
   - Add support for pNFS file layout session trunking
   - Delay xprtrdma use of DMA API (for device driver removal)
   - Add support for xprtrdma remote invalidation
   - Add support for larger xprtrdma inline thresholds
   - Use a scatter/gather list for sending xprtrdma RPC calls
   - Add support for the CB_NOTIFY_LOCK callback
   - Improve hashing sunrpc auth_creds by using both uid and gid

  Bugfixes:
   - Fix xprtrdma use of DMA API
   - Validate filenames before adding to the dcache
   - Fix corruption of xdr->nwords in xdr_copy_to_scratch
   - Fix setting buffer length in xdr_set_next_buffer()
   - Don't deadlock the state manager on the SEQUENCE status flags
   - Various delegation and stateid related fixes
   - Retry operations if an interrupted slot receives EREMOTEIO
   - Make nfs boot time y2038 safe"

* tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits)
  NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic
  fs: nfs: Make nfs boot time y2038 safe
  sunrpc: replace generic auth_cred hash with auth-specific function
  sunrpc: add RPCSEC_GSS hash_cred() function
  sunrpc: add auth_unix hash_cred() function
  sunrpc: add generic_auth hash_cred() function
  sunrpc: add hash_cred() function to rpc_authops struct
  Retry operation on EREMOTEIO on an interrupted slot
  pNFS: Fix atime updates on pNFS clients
  sunrpc: queue work on system_power_efficient_wq
  NFSv4.1: Even if the stateid is OK, we may need to recover the open modes
  NFSv4: If recovery failed for a specific open stateid, then don't retry
  NFSv4: Fix retry issues with nfs41_test/free_stateid
  NFSv4: Open state recovery must account for file permission changes
  NFSv4: Mark the lock and open stateids as invalid after freeing them
  NFSv4: Don't test open_stateid unless it is set
  NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid
  NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation
  NFSv4: Fix a race when updating an open_stateid
  NFSv4: Fix a race in nfs_inode_reclaim_delegation()
  ...

Merge tag 'nfsd-4.9' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
"Some RDMA work and some good bugfixes, and two new features that could
  benefit from user testing:

   - Anna Schumacker contributed a simple NFSv4.2 COPY implementation.
     COPY is already supported on the client side, so a call to
     copy_file_range() on a recent client should now result in a
     server-side copy that doesn't require all the data to make a round
     trip to the client and back.

   - Jeff Layton implemented callbacks to notify clients when contended
     locks become available, which should reduce latency on workloads
     with contended locks"

* tag 'nfsd-4.9' of git://linux-nfs.org/~bfields/linux:
  NFSD: Implement the COPY call
  nfsd: handle EUCLEAN
  nfsd: only WARN once on unmapped errors
  exportfs: be careful to only return expected errors.
  nfsd4: setclientid_confirm with unmatched verifier should fail
  nfsd: randomize SETCLIENTID reply to help distinguish servers
  nfsd: set the MAY_NOTIFY_LOCK flag in OPEN replies
  nfs: add a new NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK constant
  nfsd: add a LRU list for blocked locks
  nfsd: have nfsd4_lock use blocking locks for v4.1+ locks
  nfsd: plumb in a CB_NOTIFY_LOCK operation
  NFSD: fix corruption in notifier registration
  svcrdma: support Remote Invalidation
  svcrdma: Server-side support for rpcrdma_connect_private
  rpcrdma: RDMA/CM private message data structure
  svcrdma: Skip put_page() when send_reply() fails
  svcrdma: Tail iovec leaves an orphaned DMA mapping
  nfsd: fix dprintk in nfsd4_encode_getdeviceinfo
  nfsd: eliminate cb_minorversion field
  nfsd: don't set a FL_LAYOUT lease for flexfiles layouts

Merge tag 'xfs-reflink-for-linus-4.9-rc1' of git://git./linux/kernel/git/dgc/linux-xfs

    < XFS has gained super CoW powers! >
     ----------------------------------
            \   ^__^
             \  (oo)\_______
                (__)\       )\/\
                    ||----w |
                    ||     ||

Pull XFS support for shared data extents from Dave Chinner:
"This is the second part of the XFS updates for this merge cycle.  This
  pullreq contains the new shared data extents feature for XFS.

  Given the complexity and size of this change I am expecting - like the
  addition of reverse mapping last cycle - that there will be some
  follow-up bug fixes and cleanups around the -rc3 stage for issues that
  I'm sure will show up once the code hits a wider userbase.

  What it is:

  At the most basic level we are simply adding shared data extents to
  XFS - i.e. a single extent on disk can now have multiple owners. To do
  this we have to add new on-disk features to both track the shared
  extents and the number of times they've been shared. This is done by
  the new "refcount" btree that sits in every allocation group. When we
  share or unshare an extent, this tree gets updated.

  Along with this new tree, the reverse mapping tree needs to be updated
  to track each owner or a shared extent. This also needs to be updated
  ever share/unshare operation. These interactions at extent allocation
  and freeing time have complex ordering and recovery constraints, so
  there's a significant amount of new intent-based transaction code to
  ensure that operations are performed atomically from both the runtime
  and integrity/crash recovery perspectives.

  We also need to break sharing when writes hit a shared extent - this
  is where the new copy-on-write implementation comes in. We allocate
  new storage and copy the original data along with the overwrite data
  into the new location. We only do this for data as we don't share
  metadata at all - each inode has it's own metadata that tracks the
  shared data extents, the extents undergoing CoW and it's own private
  extents.

  Of course, being XFS, nothing is simple - we use delayed allocation
  for CoW similar to how we use it for normal writes. ENOSPC is a
  significant issue here - we build on the reservation code added in
  4.8-rc1 with the reverse mapping feature to ensure we don't get
  spurious ENOSPC issues part way through a CoW operation. These
  mechanisms also help minimise fragmentation due to repeated CoW
  operations. To further reduce fragmentation overhead, we've also
  introduced a CoW extent size hint, which indicates how large a region
  we should allocate when we execute a CoW operation.

  With all this functionality in place, we can hook up .copy_file_range,
  .clone_file_range and .dedupe_file_range and we gain all the
  capabilities of reflink and other vfs provided functionality that
  enable manipulation to shared extents. We also added a fallocate mode
  that explicitly unshares a range of a file, which we implemented as an
  explicit CoW of all the shared extents in a file.

  As such, it's a huge chunk of new functionality with new on-disk
  format features and internal infrastructure. It warns at mount time as
  an experimental feature and that it may eat data (as we do with all
  new on-disk features until they stabilise). We have not released
  userspace suport for it yet - userspace support currently requires
  download from Darrick's xfsprogs repo and build from source, so the
  access to this feature is really developer/tester only at this point.
  Initial userspace support will be released at the same time the kernel
  with this code in it is released.

  The new code causes 5-6 new failures with xfstests - these aren't
  serious functional failures but things the output of tests changing
  slightly due to perturbations in layouts, space usage, etc. OTOH,
  we've added 150+ new tests to xfstests that specifically exercise this
  new functionality so it's got far better test coverage than any
  functionality we've previously added to XFS.

  Darrick has done a pretty amazing job getting us to this stage, and
  special mention also needs to go to Christoph (review, testing,
  improvements and bug fixes) and Brian (caught several intricate bugs
  during review) for the effort they've also put in.

  Summary:

   - unshare range (FALLOC_FL_UNSHARE) support for fallocate

   - copy-on-write extent size hints (FS_XFLAG_COWEXTSIZE) for fsxattr
     interface

   - shared extent support for XFS

   - copy-on-write support for shared extents

   - copy_file_range support

   - clone_file_range support (implements reflink)

   - dedupe_file_range support

   - defrag support for reverse mapping enabled filesystems"

* tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (71 commits)
  xfs: convert COW blocks to real blocks before unwritten extent conversion
  xfs: rework refcount cow recovery error handling
  xfs: clear reflink flag if setting realtime flag
  xfs: fix error initialization
  xfs: fix label inaccuracies
  xfs: remove isize check from unshare operation
  xfs: reduce stack usage of _reflink_clear_inode_flag
  xfs: check inode reflink flag before calling reflink functions
  xfs: implement swapext for rmap filesystems
  xfs: refactor swapext code
  xfs: various swapext cleanups
  xfs: recognize the reflink feature bit
  xfs: simulate per-AG reservations being critically low
  xfs: don't mix reflink and DAX mode for now
  xfs: check for invalid inode reflink flags
  xfs: set a default CoW extent size of 32 blocks
  xfs: convert unwritten status of reverse mappings for shared files
  xfs: use interval query for rmap alloc operations on shared files
  xfs: add shared rmap map/unmap/convert log item types
  xfs: increase log reservations for reflink
  ...

Merge tag 'pci-v4.9-changes-2' of git://git./linux/kernel/git/helgaas/pci

PCI changes for the v4.9 merge window:
"Here are some more changes I'd like to have in v4.9.  There's one
  small Tegra bug fix in the PHY poweroff path, which is only used in
  failure paths.

  The rest is all strictly cleanup that should make host bridge drivers
  more readable, but shouldn't actually change any behavior.

  Summary:

   - use local struct device pointers in many host bridge drivers for
     clarity

   - remove unused platform data

   - use generic DesignWare accessors

   - misc cleanups: remove redundant structure entries and re-order
     structure members to put comon generic fields first etc"

* tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
  MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer
  PCI: rockchip: Indent "if" statement body
  PCI: hisi: Reorder struct hisi_pcie
  PCI: hisi: Pass device-specific struct to internal functions
  PCI: hisi: Include register block base in PCIE_SYS_STATE4 address
  PCI: dra7xx: Reorder struct dra7xx_pcie
  PCI: xilinx-nwl: Remove unused platform data
  PCI: xilinx-nwl: Add local struct device pointers
  PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument
  PCI: xilinx: Remove unused platform data
  PCI: xilinx: Add local struct device pointers
  PCI: xgene: Add register accessors
  PCI: xgene: Pass struct xgene_pcie_port to setup functions
  PCI: xgene: Remove unused platform data
  PCI: tegra: Remove unused platform data
  PCI: tegra: Add local struct device pointers
  PCI: tegra: Fix argument order in tegra_pcie_phy_disable()
  PCI: rockchip: Remove unused platform data
  PCI: rcar-gen2: Add local struct device pointers
  ...

Merge tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform drivers updates from Darren Hart:
"Cleanups, refactoring, and a couple bug fixes.

  intel_pmc_core:
   - avoid boot time warning for !CONFIG_DEBUGFS_FS

  intel_pmc_ipc:
   - Convert to use platform_device_register_full

  asus-wmi:
   - Filter buggy scan codes on ASUS Q500A

  toshiba_bluetooth:
   - Decouple an error checking status code

  toshiba_haps:
   - Change logging level from info to debug
   - Split ACPI and HDD protection error handling

  asus-laptop:
   - get rid of parse_arg()

  asus-wmi:
   - fix asus ux303ub brightness issue

  toshiba_acpi:
   - Fix typo in *_cooling_method_set function
   - Change error checking logic from TCI functions
   - Clean up variable declaration"

* tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS
  platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full
  platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A
  platform/x86: toshiba_bluetooth: Decouple an error checking status code
  platform/x86: toshiba_haps: Change logging level from info to debug
  platform/x86: toshiba_haps: Split ACPI and HDD protection error handling
  platform/x86: asus-laptop: get rid of parse_arg()
  platform/x86: asus-wmi: fix asus ux303ub brightness issue
  platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function
  platform/x86: toshiba_acpi: Change error checking logic from TCI functions
  platform/x86: toshiba_acpi: Clean up variable declaration

Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- a new watchdog pretimeout governor framework

- support to upload the firmware on the ziirave_wdt

- several fixes and cleanups

* git://www.linux-watchdog.org/linux-watchdog: (26 commits)
  watchdog: imx2_wdt: add pretimeout function support
  watchdog: softdog: implement pretimeout support
  watchdog: pretimeout: add pretimeout_available_governors attribute
  watchdog: pretimeout: add option to select a pretimeout governor in runtime
  watchdog: pretimeout: add panic pretimeout governor
  watchdog: pretimeout: add noop pretimeout governor
  watchdog: add watchdog pretimeout governor framework
  watchdog: hpwdt: add support for iLO5
  fs: compat_ioctl: add pretimeout functions for watchdogs
  watchdog: add pretimeout support to the core
  watchdog: imx2_wdt: use preferred BIT macro instead of open coded values
  watchdog: st_wdt: Remove support for obsolete platforms
  watchdog: bindings: Remove obsolete platforms from dt doc.
  watchdog: mt7621_wdt: Remove assignment of dev pointer
  watchdog: rt2880_wdt: Remove assignment of dev pointer
  watchdog: constify watchdog_ops structures
  watchdog: tegra: constify watchdog_ops structures
  watchdog: iTCO_wdt: constify iTCO_wdt_pm structure
  watchdog: cadence_wdt: Fix the suspend resume
  watchdog: txx9wdt: Add missing clock (un)prepare calls for CCF
  ...

net: bridge: add the multicast_flood flag attribute to brport_attrs

When I added the multicast flood control flag, I also added an attribute
for it for sysfs similar to other flags, but I forgot to add it to
brport_attrs.

Fixes: b6cb5ac8331b ("net: bridge: add per-port multicast flood flag")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: Remove unused parameter from __axienet_device_reset

The dev parameter passed to __axienet_device_reset() is not used inside
the function, so remove it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

liquidio: CN23XX: fix a loop timeout

This is supposed to loop 1000 times and then give up. The problem is
it's a post-op and after the loop we test if "loop" is zero when really
it would be -1. Fix this by making it a pre-op.

Fixes: 1b7c55c4538b ("liquidio: CN23XX queue manipulation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rtnl: info leak in rtnl_fill_vfinfo()

The "vf_vlan_info" struct ends with a 2 byte struct hole so we have to
memset it to ensure that no stack information is revealed to user space.

Fixes: 79aab093a0b5 ('net: Update API for VF vlan protocol 802.1ad support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: info leak in __tipc_nl_add_udp_addr()

We should clear out the padding and unused struct members so that we
don't expose stack information to userspace.

Fixes: fdb3accc2c15 ('tipc: add the ability to get UDP options via netlink')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4: Do not drop to make_route if oif is l3mdev

Commit e0d56fdd7342 was a bit aggressive removing l3mdev calls in
the IPv4 stack. If the fib_lookup fails we do not want to drop to
make_route if the oif is an l3mdev device.

Also reverts 19664c6a0009 ("net: l3mdev: Remove netif_index_is_l3_master")
which removed netif_index_is_l3_master.

Fixes: e0d56fdd7342 ("net: l3mdev: remove redundant calls")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

afs: call->operation_ID sometimes used as __be32 sometimes as u32

call->operation_ID is sometimes being used as __be32 sometimes is being
used as u32. Be consistent and settle on using as u32.

Signed-off-by: David Howells <dhowells@redhat.com.

net: phy: Trigger state machine on state change and not polling.

The phy_start() is used to indicate the PHY is now ready to do its
work. The state is changed, normally to PHY_UP which means that both
the MAC and the PHY are ready.

If the phy driver is using polling, when the next poll happens, the
state machine notices the PHY is now in PHY_UP, and kicks off
auto-negotiation, if needed.

If however, the PHY is using interrupts, there is no polling. The phy
is stuck in PHY_UP until the next interrupt comes along. And there is
no reason for the PHY to interrupt.

Have phy_start() schedule the state machine to run, which both speeds
up the polling use case, and makes the interrupt use case actually
work.

This problems exists whenever there is a state change which will not
cause an interrupt. Trigger the state machine in these cases,
e.g. phy_error().

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Kyle Roeschley <kyle.roeschley@ni.com>
Tested-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: tcp: restore IP6CB for pktoptions skbs

Baozeng Ding reported following KASAN splat :

BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8
Read of size 1 by task poc/25548
Call Trace:
[<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15
[<     inline     >] print_address_description /mm/kasan/report.c:204
[<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283
[<     inline     >] kasan_report /mm/kasan/report.c:303
[<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321
[<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687
[<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40
[<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150
[<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230
[<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035
[<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647
[<     inline     >] SYSC_getsockopt /net/socket.c:1776
[<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758
[<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6
Memory state around the buggy address:
ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                              ^
ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

He also provided a syzkaller reproducer.

Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB
data that was moved at a different place in tcp_v6_rcv()

This patch moves tcp_v6_restore_cb() up and calls it from
tcp_v6_do_rcv() when np->pktoptions is set.

Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netvsc: Remove mistaken udp.h inclusion.

Based upon v2 of Stephen's patch.

Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: fix type mismatch warning

Wiht the latest rework of the xen-netback driver, we get a warning
on ARM about the types passed into min():

drivers/net/xen-netback/rx.c: In function 'xenvif_rx_next_chunk':
include/linux/kernel.h:739:16: error: comparison of distinct pointer types lacks a cast [-Werror]

The reason is that XEN_PAGE_SIZE is not size_t here. There
is no actual bug, and we can easily avoid the warning using the
min_t() macro instead of min().

Fixes: eb1723a29b9a ("xen-netback: refactor guest rx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: fix error check when init ptp

This patch fixes a problem when propagated the
failure of ptp_clock_register to open function.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: fix ptp init for gmac4

The gmac 4.x version has not extended descriptors
(that are available on 3.x instead of).
While initializing the PTP module, the advanced PTP was
enabled in case of extended descriptors. This cannot be
applied for 4.x version where only the hardware capability
register has to show if the feature is present.
Patch also adds some extra netdev_(debug/inof) to better
dump the configuration.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: fix old-style function definition

The definition of qed_get_rdma_ops() is not a prototype unless
we add 'void' here, as indicated by this W=1 warning:

drivers/net/ethernet/qlogic/qed/qed_roce.c: In function ‘qed_get_rdma_ops’:
drivers/net/ethernet/qlogic/qed/qed_roce.c:2950:28: error: old-style function definition [-Werror=old-style-definition]

Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netvsc: fix checksum on UDP IPV6

The software calculation of UDP checksum in Netvsc driver was
only handling IPv4 case. By using skb_checksum_help() instead
all protocols can be handled. Rearrange code to eliminate goto
and look like other drivers.

This is a temporary solution; recent versions of Window Server etc
do support UDP checksum offload, just need to do the appropriate negotiation
with host to validate before using. This will be done in later patch.

Please queue this for -stable as well.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: reorder pernet ops and act ops registrations

Krister reported a kernel NULL pointer dereference after
tcf_action_init_1() invokes a_o->init(), it is a race condition
where one thread calling tcf_register_action() to initialize
the netns data after putting act ops in the global list and
the other thread searching the list and then calling
a_o->init(net, ...).

Fix this by moving the pernet ops registration before making
the action ops visible. This is fine because: a) we don't
rely on act_base in pernet ops->init(), b) in the worst case we
have a fully initialized netns but ops is still not ready so
new actions still can't be created.

Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: fix guest Rx stall detection (after guest Rx refactor)

If a VIF has been ready for rx_stall_timeout (60s by default) and an
Rx ring is drained of all requests an Rx stall will be incorrectly
detected. When this occurs and the guest Rx queue is empty, the Rx
ring's event index will not be set and the frontend will not raise an
event when new requests are placed on the ring, permanently stalling
the VIF.

This is a regression introduced by eb1723a29b9a7 (xen-netback:
refactor guest rx).

Fix this by reinstating the setting of queue->last_rx_time when
placing a packet onto the guest Rx ring.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ptp: Fix kernel memory disclosure

The reserved field precise_offset->rsv is not cleared before being
copied to user space, leaking kernel stack memory. Clear the struct
before it's copied.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON

I am hitting this in mlx5:

drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function
reclaim_pages_cmd.clone.0:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:346: error: call
to __compiletime_assert_346 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_out, pas[i]) % 64
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function give_pages:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:291: error: call
to __compiletime_assert_291 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_in, pas[i]) % 64

Problem is that this is doing a BUILD_BUG_ON on a non-constant
expression because of trying to take offset of pas[i] in the
structure.

Fix is to create MLX5_ARRAY_SET64 that takes an additional argument
that is the field index to separate between BUILD_BUG_ON on the array
constant field and the indexed field to assign the value to.
There are two callers of MLX5_SET64 that are trying to get a variable
offset, change those to call MLX5_ARRAY_SET64 passing 'pas' and 'i'
as the arguments to use in the offset check and the indexed value
assignment.

Fixes: a533ed5e179cd ("net/mlx5: Pages management commands via mlx5 ifc")
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: add support for Quectel EC21 and EC25

The Quectel EC21 and EC25 need the same "set DTR" request as devices
based on the MDM9230 chipset, but has no USB3 support. Our best guess
is that the "set DTR" functionality depends on chipset and/or
baseband firmware generation. But USB3 is still an optional feature.

Since we cannot enable this unconditionally for all older devices, and
there doesn't appear to be anything we can use in the USB descriptors
to identify these chips, we are forced to use a device specific quirk
flag.

Reported-and-tested-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ovs-8021AD-fixes'

Jiri Benc says:

====================
openvswitch: vlan fixes

Fix three issues introduced by the 802.1AD patchset.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev

The internal device does support 802.1AD offloading since 018c1dda5ff1
("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink
attributes").

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Eric Garver <e@erig.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: fix vlan subtraction from packet length

When the packet has its vlan tag in skb->vlan_tci, the length of the VLAN
header is not counted in skb->len. It doesn't make sense to subtract it.

Fixes: 018c1dda5ff1 ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Eric Garver <e@erig.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: vlan: remove wrong likely statement

This code is called whenever flow key is being extracted from the packet.
The packet may be as likely vlan tagged as not.

Fixes: 018c1dda5ff1 ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Eric Garver <e@erig.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix to use list_for_each_entry_safe() when delete items

Since we will remove items off the list using list_del() we need
to use a safe version of the list_for_each_entry() macro aptly named
list_for_each_entry_safe().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tlan: avoid unused label with PCI=n

While build testing with randconfig on x86, I ran into this warning
that appears to have been around forever

drivers/net/ethernet/ti/tlan.c: In function ‘tlan_probe1’:
drivers/net/ethernet/ti/tlan.c:614:1: error: label ‘err_out’ defined but not used [-Werror=unused-label]

This can be trivially avoided by just moving the label into the
existing #ifdef.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: (re-)create a debugfs node for hash information

It is useful to be able to see the hash configuration when running tests.
This patch adds a debugfs node for that purpose.

The original version of this patch (commit c0c64c152389) was reverted due
to build failures caused by a conflict with commit 0364a8824c02
("xen-netback: switch to threaded irq for control ring"). This new version
of the patch is nearly identical to the original, the only difference
being that creation of the debugfs node is predicated on 'ctrl_irq' being
non-zero rather then the now non-existent 'ctrl_task'.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: do not broadcast RTM_GETTFILTER result

There are two ways to get tc filters from kernel to user space.

1) Full dump (tc_dump_tfilter())
2) RTM_GETTFILTER to get one precise filter, reducing overhead.

The second operation is unfortunately broadcasting its result,
polluting "tc monitor" users.

This patch makes sure only the requester gets the result, using
netlink_unicast() instead of rtnetlink_send()

Jamal cooked an iproute2 patch to implement "tc filter get" operation,
but other user space libraries already use RTM_GETTFILTER when a single
filter is queried, instead of dumping all filters.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ath6kl: add Dell OEM SDIO I/O for the Venue 8 Pro

SDIO ID 0271:0418

Signed-off-by: Alan Cox <alan@linux.intel.com>
Bugzilla-ID: https://bugzilla.kernel.org/show_bug.cgi?id=67921
Reviewed-by: Steve deRosier <steve.derosier@lairdtech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>