git.stricted.de - GitHub/LineageOS/android_kernel_motorola

net: arc_emac: Fix memleak in arc_mdio_probe

[ Upstream commit e2d79cd8875fa8c3cc7defa98a8cc99a1ed0c62f ]

When devm_gpiod_get_optional() fails, bus should be
freed just like when of_mdiobus_register() fails.

Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ravb: Fixed to be able to unload modules

[ Upstream commit 1838d6c62f57836639bd3d83e7855e0ee4f6defc ]

When this driver is built as a module, I cannot rmmod it after insmoding
it.
This is because that this driver calls ravb_mdio_init() at the time of
probe, and module->refcnt is incremented by alloc_mdio_bitbang() called
after that.
Therefore, even if ifup is not performed, the driver is in use and rmmod
cannot be performed.

$ lsmod
Module Size Used by
ravb 40960 1
$ rmmod ravb
rmmod: ERROR: Module ravb is in use

Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby
rmmod is possible in the ifdown state.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: systemport: Fix memleak in bcm_sysport_probe

[ Upstream commit 7ef1fc57301f3cef7201497aa27e89ccb91737fe ]

When devm_kcalloc() fails, dev should be freed just
like what we've done in the subsequent error paths.

Fixes: 7b78be48a8eb6 ("net: systemport: Dynamically allocate number of TX rings")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns: Fix memleak in hns_nic_dev_probe

[ Upstream commit 100e3345c6e719d2291e1efd5de311cc24bb9c0b ]

hns_nic_dev_probe allocates ndev, but not free it on
two error handling paths, which may lead to memleak.

Fixes: 63434888aaf1b ("net: hns: net: hns: enet adds support of acpi")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix destination register zeroing

[ Upstream commit 1e105e6afa6c3d32bfb52c00ffa393894a525c27 ]

Following bug was reported via irc:
nft list ruleset
   set knock_candidates_ipv4 {
      type ipv4_addr . inet_service
      size 65535
      elements = { 127.0.0.1 . 123,
                   127.0.0.1 . 123 }
      }
..
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 }
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport }

It should not have been possible to add a duplicate set entry.

After some debugging it turned out that the problem is the immediate
value (123) in the second-to-last rule.

Concatenations use 32bit registers, i.e. the elements are 8 bytes each,
not 6 and it turns out the kernel inserted

inet firewall @knock_candidates_ipv4
        element 0100007f ffff7b00  : 0 [end]
        element 0100007f 00007b00  : 0 [end]

Note the non-zero upper bits of the first element.  It turns out that
nft_immediate doesn't zero the destination register, but this is needed
when the length isn't a multiple of 4.

Furthermore, the zeroing in nft_payload is broken.  We can't use
[len / 4] = 0 -- if len is a multiple of 4, index is off by one.

Skip zeroing in this case and use a conditional instead of (len -1) / 4.

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: incorrect enum nft_list_attributes definition

[ Upstream commit da9125df854ea48a6240c66e8a67be06e2c12c03 ]

This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other
similar attribute definitions are postfixed with _UNSPEC.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: add NFTA_SET_USERDATA if not null

[ Upstream commit 6f03bf43ee05b31d3822def2a80f11b3591c55b3 ]

Kernel sends an empty NFTA_SET_USERDATA attribute with no value if
userspace adds a set with no NFTA_SET_USERDATA attribute.

Fixes: e6d8ecac9e68 ("netfilter: nf_tables: Add new attributes into nft_set to store user data.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores

[ Upstream commit e14f633b66902615cf7faa5d032b45ab8b6fb158 ]

The initialization done by bmips_cpu_setup() typically affects both
threads of a given core, on 7435 which supports 2 cores and 2 threads,
logical CPU number 2 and 3 would not run this initialization.

Fixes: 738a3f79027b ("MIPS: BMIPS: Add early CPU initialization code")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: mm: BMIPS5000 has inclusive physical caches

[ Upstream commit dbfc95f98f0158958d1f1e6bf06d74be38dbd821 ]

When the BMIPS generic cpu-feature-overrides.h file was introduced,
cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for
BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary
cache successfully.

Fixes: f337967d6d87 ("MIPS: BMIPS: Add cpu-feature-overrides.h")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()

[ Upstream commit 0cef8e2c5a07d482ec907249dbd6687e8697677f ]

The reurn value of of_find_device_by_node() is not checked, thus null
pointer dereference will be triggered if of_find_device_by_node()
failed.

Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: bla: use netif_rx_ni when not in interrupt context

[ Upstream commit 279e89b2281af3b1a9f04906e157992c19c9f163 ]

batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Fix own OGM check in aggregated OGMs

[ Upstream commit d8bf0c01642275c7dca1e5d02c34e4199c200b1f ]

The own OGM check is currently misplaced and can lead to the following
issues:

For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.

For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.

Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Avoid uninitialized chaddr when handling DHCP

[ Upstream commit 303216e76dcab6049c9d42390b1032f0649a8206 ]

The gateway client code can try to optimize the delivery of DHCP packets to
avoid broadcasting them through the whole mesh. But also transmissions to
the client can be optimized by looking up the destination via the chaddr of
the DHCP packet.

But the chaddr is currently only done when chaddr is fully inside the
non-paged area of the skbuff. Otherwise it will not be initialized and the
unoptimized path should have been taken.

But the implementation didn't handle this correctly. It didn't retrieve the
correct chaddr but still tried to perform the TT lookup with this
uninitialized memory.

Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com
Fixes: 6c413b1c22a2 ("batman-adv: send every DHCP packet as bat-unicast")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling

[ Upstream commit 5b2aa9f918f6837ae943557f8cec02c34fcf80e7 ]

of_dma_xlate callback can return ERR_PTR as well NULL in case of failure.

If error code is returned (not NULL) then the route should be released and
the router should not be registered for the channel.

Fixes: 56f13c0d9524c ("dmaengine: of_dma: Support for DMA routers")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/xenbus: Fix granting of vmalloc'd memory

[ Upstream commit d742db70033c745e410523e00522ee0cfe2aa416 ]

On some architectures (like ARM), virt_to_gfn cannot be used for
vmalloc'd memory because of its reliance on virt_to_phys. This patch
introduces a check for vmalloc'd addresses and obtains the PFN using
vmalloc_to_pfn in that case.

Signed-off-by: Simon Leiner <simon@leiner.me>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: don't trace preemption in percpu macros

[ Upstream commit 1196f12a2c960951d02262af25af0bb1775ebcc2 ]

Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context}
to per-cpu variables") the lockdep code itself uses percpu variables. This
leads to recursions because the percpu macros are calling preempt_enable()
which might call trace_preempt_on().

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: Fixup IRQ state

[ Upstream commit 49d9c5936314e44d314c605c39cce0fd947f9c3a ]

Match the pattern elsewhere in this file.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.251340558@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: don't allow setlease on cephfs

[ Upstream commit 496ceaf12432b3d136dcdec48424312e71359ea7 ]

Leases don't currently work correctly on kcephfs, as they are not broken
when caps are revoked. They could eventually be implemented similarly to
how we did them in libcephfs, but for now don't allow them.

[ idryomov: no need for simple_nosetlease() in ceph_dir_fops and
ceph_snapdir_fops ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: Disable keep-alive timer when kato is cleared to 0h

[ Upstream commit 0d3b6a8d213a30387b5104b2fb25376d18636f23 ]

Based on nvme spec, when keep alive timeout is set to zero
the keep-alive timer should be disabled.

Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (applesmc) check status earlier.

[ Upstream commit cecf7560f00a8419396a2ed0f6e5d245ccb4feac ]

clang static analysis reports this representative problem

applesmc.c:758:10: warning: 1st function call argument is an
  uninitialized value
        left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

buffer is filled by the earlier call

ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ...

This problem is reported because a goto skips the status check.
Other similar problems use data from applesmc_read_key before checking
the status.  So move the checks to before the use.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: add shutdown support for display platform_driver

[ Upstream commit 9d5cbf5fe46e350715389d89d0c350d83289a102 ]

Define shutdown callback for display drm driver,
so as to disable all the CRTCS when shutdown
notification is received by the driver.

This change will turn off the timing engine so
that no display transactions are requested
while mmu translations are getting disabled
during reboot sequence.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Changes in v2:
- Remove NULL check from msm_pdev_shutdown (Stephen Boyd)
- Change commit text to reflect when this issue
was uncovered (Sai Prakash Ranjan)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf record/stat: Explicitly call out event modifiers in the documentation

commit e48a73a312ebf19cc3d72aa74985db25c30757c1 upstream.

Event modifiers are not mentioned in the perf record or perf stat
manpages. Add them to orient new users more effectively by pointing
them to the perf list manpage for details.

Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: Sanitize event code and type when mapping input

commit 35556bed836f8dc07ac55f69c8d17dce3e7f0e25 upstream.

When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.

This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".

Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses

Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: Correctly handle ReportSize being zero

commit bce1305c0ece3dc549663605e567655dd701752c upstream.

It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.

Detect the corner case and correctly compute the size.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.196

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Update documentation comment for MS2109 quirk

commit 74a2a7de81a2ef20732ec02087314e92692a7a1b upstream.

As the recent fix addressed the channel swap problem more properly,
update the comment as well.

Fixes: 1b7ecc241a67 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109")
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()

commit 25a097f5204675550afb879ee18238ca917cba7a upstream.

`uref->usage_index` is not always being properly checked, causing
hiddev_ioctl_usage() to go out of bounds under some cases. Fix it.

Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Unify the mismatching TPM space buffer sizes

[ Upstream commit 6c4e79d99e6f42b79040f1a33cd4018f5425030b ]

The size of the buffers for storing context's and sessions can vary from
arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the
maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be
enough for most use with three handles (that is how many we allow at the
moment). Parametrize the buffer size while doing this, so that it is easier
to revisit this later on if required.

Cc: stable@vger.kernel.org
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: check the right error variable in btrfs_del_dir_entries_in_log

[ Upstream commit fb2fecbad50964b9f27a3b182e74e437b40753ef ]

With my new locking code dbench is so much faster that I tripped over a
transaction abort from ENOSPC.  This turned out to be because
btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this
function sets err on error, and returns err.  So instead of properly
marking the inode as needing a full commit, we were returning -ENOSPC
and aborting in __btrfs_unlink_inode.  Fix this by checking the proper
variable so that we return the correct thing in the case of ENOSPC.

The ENOENT needs to be checked, because btrfs_lookup_dir_item_index()
can return -ENOENT if the dir item isn't in the tree log (which would
happen if we hadn't fsync'ed this guy).  We actually handle that case in
__btrfs_unlink_inode, so it's an expected error to get back.

Fixes: 4a500fd178c8 ("Btrfs: Metadata ENOSPC handling for tree log")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note and comment about ENOENT ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: storage: Add unusual_uas entry for Sony PSZ drives

commit 20934c0de13b49a072fb1e0ca79fe0fe0e40eae5 upstream.

The PSZ-HA* family of USB disk drives from Sony can't handle the
REPORT OPCODES command when using the UAS protocol. This patch adds
an appropriate quirks entry.

Reported-and-tested-by: Till Dörges <doerges@pre-sense.de>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: rework notification_buffer resizing

commit f4b9d8a582f738c24ebeabce5cc15f4b8159d74e upstream.

Clang static analysis reports this error

cdc-acm.c:409:3: warning: Use of memory after it is freed
        acm_process_notification(acm, (unsigned char *)dr);

There are three problems, the first one is that dr is not reset

The variable dr is set with

if (acm->nb_index)
dr = (struct usb_cdc_notification *)acm->notification_buffer;

But if the notification_buffer is too small it is resized with

if (acm->nb_size) {
kfree(acm->notification_buffer);
acm->nb_size = 0;
}
alloc_size = roundup_pow_of_two(expected_size);
/*
* kmalloc ensures a valid notification_buffer after a
* use of kfree in case the previous allocation was too
* small. Final freeing is done on disconnect.
*/
acm->notification_buffer =
kmalloc(alloc_size, GFP_ATOMIC);

dr should point to the new acm->notification_buffer.

The second problem is any data in the notification_buffer is lost
when the pointer is freed.  In the normal case, the current data
is accumulated in the notification_buffer here.

memcpy(&acm->notification_buffer[acm->nb_index],
       urb->transfer_buffer, copy_size);

When a resize happens, anything before
notification_buffer[acm->nb_index] is garbage.

The third problem is the acm->nb_index is not reset on a
resizing buffer error.

So switch resizing to using krealloc and reassign dr and
reset nb_index.

Fixes: ea2583529cd1 ("cdc-acm: reassemble fragmented notifications")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200801152154.20683-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: u_f: Unbreak offset calculation in VLAs

commit bfd08d06d978d0304eb6f7855b548aa2cd1c5486 upstream.

Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks
to VLA macros") makes VLA macros to always return 0 due to different scope of
two variables of the same name. Obviously we need to have only one.

Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()

commit 2b74b0a04d3e9f9f08ff026e5663dce88ff94e52 upstream.

Some values extracted by ncm_unwrap_ntb() could possibly lead to several
different out of bounds reads of memory. Specifically the values passed
to netdev_alloc_skb_ip_align() need to be checked so that memory is not
overflowed.

Resolve this by applying bounds checking to a number of different
indexes and lengths of the structure parsing logic.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: u_f: add overflow checks to VLA macros

commit b1cd1b65afba95971fa457dfdb2c941c60d38c5b upstream.

size can potentially hold an overflowed value if its assigned expression
is left unchecked, leading to a smaller than needed allocation when
vla_group_size() is used by callers to allocate memory.
To fix this, add a test for saturation before declaring variables and an
overflow check to (n) * sizeof(type).
If the expression results in overflow, vla_group_size() will return SIZE_MAX.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

overflow.h: Add allocation size calculation helpers

commit 610b15c50e86eb1e4b77274fabcaea29ac72d6a8 upstream.

In preparation for replacing unchecked overflows for memory allocations,
this creates helpers for the 3 most common calculations:

array_size(a, b): 2-dimensional array
array3_size(a, b, c): 3-dimensional array
struct_size(ptr, member, n): struct followed by n-many trailing members

Each of these return SIZE_MAX on overflow instead of wrapping around.

(Additionally renames a variable named "array_size" to avoid future
collision.)

Co-developed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()

commit 1d4169834628d18b2392a2da92b7fbf5e8e2ce89 upstream.

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ohci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge

commit 9aa37788e7ebb3f489fb4b71ce07adadd444264a upstream.

This device does not support UAS properly and a similar entry already
exists in drivers/usb/storage/unusual_uas.h. Without this patch,
storage_probe() defers the handling of this device to UAS, which cannot
handle it either.

Tested-by: Brice Goglin <brice.goglin@gmail.com>
Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: Add no-lpm quirk for another Raydium touchscreen

commit 5967116e8358899ebaa22702d09b0af57fef23e1 upstream.

There's another Raydium touchscreen needs the no-lpm quirk:
[    1.339149] usb 1-9: New USB device found, idVendor=2386, idProduct=350e, bcdDevice= 0.00
[    1.339150] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.339151] usb 1-9: Product: Raydium Touch System
[    1.339152] usb 1-9: Manufacturer: Raydium Corporation
...
[    6.450497] usb 1-9: can't set config #1, error -110

BugLink: https://bugs.launchpad.net/bugs/1889446
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200731051622.28643-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: uas: Add quirk for PNY Pro Elite

commit 9a469bc9f32dd33c7aac5744669d21a023a719cd upstream.

PNY Pro Elite USB 3.1 Gen 2 device (SSD) doesn't respond to ATA_12
pass-through command (i.e. it just hangs). If it doesn't support this
command, it should respond properly to the host. Let's just add a quirk
to be able to move forward with other operations.

Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Link: https://lore.kernel.org/r/2b0585228b003eedcc82db84697b31477df152e0.1597803605.git.thinhn@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: yurex: Fix bad gfp argument

commit f176ede3a3bde5b398a6777a7f9ff091baa2d3ff upstream.

The syzbot fuzzer identified a bug in the yurex driver: It passes
GFP_KERNEL as a memory-allocation flag to usb_submit_urb() at a time
when its state is TASK_INTERRUPTIBLE, not TASK_RUNNING:

do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000370c7c68>] prepare_to_wait+0xb1/0x2a0 kernel/sched/wait.c:247
WARNING: CPU: 1 PID: 340 at kernel/sched/core.c:7253 __might_sleep+0x135/0x190
kernel/sched/core.c:7253
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 340 Comm: syz-executor677 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
panic+0x2aa/0x6e1 kernel/panic.c:231
__warn.cold+0x20/0x50 kernel/panic.c:600
report_bug+0x1bd/0x210 lib/bug.c:198
handle_bug+0x41/0x80 arch/x86/kernel/traps.c:234
exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
RIP: 0010:__might_sleep+0x135/0x190 kernel/sched/core.c:7253
Code: 65 48 8b 1c 25 40 ef 01 00 48 8d 7b 10 48 89 fe 48 c1 ee 03 80 3c 06 00 75
2b 48 8b 73 10 48 c7 c7 e0 9e 06 86 e8 ed 12 f6 ff <0f> 0b e9 46 ff ff ff e8 1f
b2 4b 00 e9 29 ff ff ff e8 15 b2 4b 00
RSP: 0018:ffff8881cdb77a28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881c6458000 RCX: 0000000000000000
RDX: ffff8881c6458000 RSI: ffffffff8129ec93 RDI: ffffed1039b6ef37
RBP: ffffffff86fdade2 R08: 0000000000000001 R09: ffff8881db32f54f
R10: 0000000000000000 R11: 0000000030343354 R12: 00000000000001f2
R13: 0000000000000000 R14: 0000000000000068 R15: ffffffff83c1b1aa
slab_pre_alloc_hook.constprop.0+0xea/0x200 mm/slab.h:498
slab_alloc_node mm/slub.c:2816 [inline]
slab_alloc mm/slub.c:2900 [inline]
kmem_cache_alloc_trace+0x46/0x220 mm/slub.c:2917
kmalloc include/linux/slab.h:554 [inline]
dummy_urb_enqueue+0x7a/0x880 drivers/usb/gadget/udc/dummy_hcd.c:1251
usb_hcd_submit_urb+0x2b2/0x22d0 drivers/usb/core/hcd.c:1547
usb_submit_urb+0xb4e/0x13e0 drivers/usb/core/urb.c:570
yurex_write+0x3ea/0x820 drivers/usb/misc/yurex.c:495

This patch changes the call to use GFP_ATOMIC instead of GFP_KERNEL.

Reported-and-tested-by: syzbot+c2c3302f9c601a4b1be2@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200810182954.GB307778@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix buffer overflow in INFO ioctl

commit b5b97cab55eb71daba3283c8b1d2cce456d511a1 upstream.

The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device property: Fix the secondary firmware node handling in set_primary_fwnode()

commit c15e1bdda4365a5f17cdadf22bf1c1df13884a9e upstream.

When the primary firmware node pointer is removed from a
device (set to NULL) the secondary firmware node pointer,
when it exists, is made the primary node for the device.
However, the secondary firmware node pointer of the original
primary firmware node is never cleared (set to NULL).

To avoid situation where the secondary firmware node pointer
is pointing to a non-existing object, clearing it properly
when the primary node is removed from a device in
set_primary_fwnode().

Fixes: 97badf873ab6 ("device property: Make it possible to use secondary firmware nodes")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: sleep: core: Fix the handling of pending runtime resume requests

commit e3eb6e8fba65094328b8dca635d00de74ba75b45 upstream.

It has been reported that system-wide suspend may be aborted in the
absence of any wakeup events due to unforseen interactions of it with
the runtume PM framework.

One failing scenario is when there are multiple devices sharing an
ACPI power resource and runtime-resume needs to be carried out for
one of them during system-wide suspend (for example, because it needs
to be reconfigured before the whole system goes to sleep).  In that
case, the runtime-resume of that device involves turning the ACPI
power resource "on" which in turn causes runtime-resume requests
to be queued up for all of the other devices sharing it.  Those
requests go to the runtime PM workqueue which is frozen during
system-wide suspend, so they are not actually taken care of until
the resume of the whole system, but the pm_runtime_barrier()
call in __device_suspend() sees them and triggers system wakeup
events for them which then cause the system-wide suspend to be
aborted if wakeup source objects are in active use.

Of course, the logic that leads to triggering those wakeup events is
questionable in the first place, because clearly there are cases in
which a pending runtime resume request for a device is not connected
to any real wakeup events in any way (like the one above).  Moreover,
it is racy, because the device may be resuming already by the time
the pm_runtime_barrier() runs and so if the driver doesn't take care
of signaling the wakeup event as appropriate, it will be lost.
However, if the driver does take care of that, the extra
pm_wakeup_event() call in the core is redundant.

Accordingly, drop the conditional pm_wakeup_event() call fron
__device_suspend() and make the latter call pm_runtime_barrier()
alone.  Also modify the comment next to that call to reflect the new
code and extend it to mention the need to avoid unwanted interactions
between runtime PM and system-wide device suspend callbacks.

Fixes: 1e2ef05bb8cf8 ("PM: Limit race conditions between runtime PM and system sleep (v2)")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Do warm-reset when both CAS and XDEV_RESUME are set

commit 904df64a5f4d5ebd670801d869ca0a6d6a6e8df6 upstream.

Sometimes re-plugging a USB device during system sleep renders the device
useless:
[  173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262
...
[  176.496485] usb 2-4: Waited 2000ms for CONNECT
[  176.496781] usb usb2-port4: status 0000.0262 after resume, -19
[  176.497103] usb 2-4: can't resume, status -19
[  176.497438] usb usb2-port4: logical disconnect

Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore,
despite of CAS bit is flagged.

So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for
the port.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.

commit c330fb1ddc0a922f044989492b7fcca77ee1db46 upstream.

handler data is meant for interrupt handlers and not for storing irq chip
specific information as some devices require handler data to store internal
per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers.

This obviously creates a conflict of interests and crashes the machine
because the XEN pointer is overwritten by the driver pointer.

As the XEN data is not handler specific it should be stored in
irqdesc::irq_data::chip_data instead.

A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that.

Cc: stable@vger.kernel.org
Reported-by: Roman Shaposhnik <roman@zededa.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: Fix sync livelock due to b_dirty_time processing

commit f9cae926f35e8230330f28c7b743ad088611a8de upstream.

When we are processing writeback for sync(2), move_expired_inodes()
didn't set any inode expiry value (older_than_this). This can result in
writeback never completing if there's steady stream of inodes added to
b_dirty_time list as writeback rechecks dirty lists after each writeback
round whether there's more work to be done. Fix the problem by using
sync(2) start time is inode expiry value when processing b_dirty_time
list similarly as for ordinarily dirtied inodes. This requires some
refactoring of older_than_this handling which simplifies the code
noticeably as a bonus.

Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
CC: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: Avoid skipping inode writeback

commit 5afced3bf28100d81fb2fe7e98918632a08feaf5 upstream.

Inode's i_io_list list head is used to attach inode to several different
lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker
prepares a list of inodes to writeback e.g. for sync(2), it moves inodes
to b_io list. Thus it is critical for sync(2) data integrity guarantees
that inode is not requeued to any other writeback list when inode is
queued for processing by flush worker. That's the reason why
writeback_single_inode() does not touch i_io_list (unless the inode is
completely clean) and why __mark_inode_dirty() does not touch i_io_list
if I_SYNC flag is set.

However there are two flaws in the current logic:

1) When inode has only I_DIRTY_TIME set but it is already queued in b_io
list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC)
can still move inode back to b_dirty list resulting in skipping
writeback of inode time stamps during sync(2).

2) When inode is on b_dirty_time list and writeback_single_inode() races
with __mark_inode_dirty() like:

writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES)
  inode->i_state |= I_SYNC
  __writeback_single_inode()
  inode->i_state |= I_DIRTY_PAGES;
  if (inode->i_state & I_SYNC)
    bail
  if (!(inode->i_state & I_DIRTY_ALL))
  - not true so nothing done

We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus
standard background writeback will not writeback this inode leading to
possible dirty throttling stalls etc. (thanks to Martijn Coenen for this
analysis).

Fix these problems by tracking whether inode is queued in b_io or
b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we
know flush worker has queued inode and we should not touch i_io_list.
On the other hand we also know that once flush worker is done with the
inode it will requeue the inode to appropriate dirty list. When
I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode
to appropriate dirty list.

Reported-by: Martijn Coenen <maco@android.com>
Reviewed-by: Martijn Coenen <maco@android.com>
Tested-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: Protect inode->i_io_list with inode->i_lock

commit b35250c0816c7cf7d0a8de92f5fafb6a7508a708 upstream.

Currently, operations on inode->i_io_list are protected by
wb->list_lock. In the following patches we'll need to maintain
consistency between inode->i_state and inode->i_io_list so change the
code so that inode->i_lock protects also all inode's i_io_list handling.

Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: stable@vger.kernel.org # Prerequisite for "writeback: Avoid skipping inode writeback"
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: change lock order in serial8250_do_startup()

commit 205d300aea75623e1ae4aa43e0d265ab9cf195fd upstream.

We have a number of "uart.port->desc.lock vs desc.lock->uart.port"
lockdep reports coming from 8250 driver; this causes a bit of trouble
to people, so let's fix it.

The problem is reverse lock order in two different call paths:

chain #1:

serial8250_do_startup()
  spin_lock_irqsave(&port->lock);
   disable_irq_nosync(port->irq);
    raw_spin_lock_irqsave(&desc->lock)

chain #2:

  __report_bad_irq()
   raw_spin_lock_irqsave(&desc->lock)
    for_each_action_of_desc()
     printk()
      spin_lock_irqsave(&port->lock);

Fix this by changing the order of locks in serial8250_do_startup():
do disable_irq_nosync() first, which grabs desc->lock, and grab
uart->port after that, so that chain #1 and chain #2 have same lock
order.

Full lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
5.4.39 #55 Not tainted
======================================================

swapper/0/0 is trying to acquire lock:
ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57

but task is already holding lock:
ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&irq_desc_lock_class){-.-.}:
        _raw_spin_lock_irqsave+0x61/0x8d
        __irq_get_desc_lock+0x65/0x89
        __disable_irq_nosync+0x3b/0x93
        serial8250_do_startup+0x451/0x75c
        uart_startup+0x1b4/0x2ff
        uart_port_activate+0x73/0xa0
        tty_port_open+0xae/0x10a
        uart_open+0x1b/0x26
        tty_open+0x24d/0x3a0
        chrdev_open+0xd5/0x1cc
        do_dentry_open+0x299/0x3c8
        path_openat+0x434/0x1100
        do_filp_open+0x9b/0x10a
        do_sys_open+0x15f/0x3d7
        kernel_init_freeable+0x157/0x1dd
        kernel_init+0xe/0x105
        ret_from_fork+0x27/0x50

-> #1 (&port_lock_key){-.-.}:
        _raw_spin_lock_irqsave+0x61/0x8d
        serial8250_console_write+0xa7/0x2a0
        console_unlock+0x3b7/0x528
        vprintk_emit+0x111/0x17f
        printk+0x59/0x73
        register_console+0x336/0x3a4
        uart_add_one_port+0x51b/0x5be
        serial8250_register_8250_port+0x454/0x55e
        dw8250_probe+0x4dc/0x5b9
        platform_drv_probe+0x67/0x8b
        really_probe+0x14a/0x422
        driver_probe_device+0x66/0x130
        device_driver_attach+0x42/0x5b
        __driver_attach+0xca/0x139
        bus_for_each_dev+0x97/0xc9
        bus_add_driver+0x12b/0x228
        driver_register+0x64/0xed
        do_one_initcall+0x20c/0x4a6
        do_initcall_level+0xb5/0xc5
        do_basic_setup+0x4c/0x58
        kernel_init_freeable+0x13f/0x1dd
        kernel_init+0xe/0x105
        ret_from_fork+0x27/0x50

-> #0 (console_owner){-...}:
        __lock_acquire+0x118d/0x2714
        lock_acquire+0x203/0x258
        console_lock_spinning_enable+0x51/0x57
        console_unlock+0x25d/0x528
        vprintk_emit+0x111/0x17f
        printk+0x59/0x73
        __report_bad_irq+0xa3/0xba
        note_interrupt+0x19a/0x1d6
        handle_irq_event_percpu+0x57/0x79
        handle_irq_event+0x36/0x55
        handle_fasteoi_irq+0xc2/0x18a
        do_IRQ+0xb3/0x157
        ret_from_intr+0x0/0x1d
        cpuidle_enter_state+0x12f/0x1fd
        cpuidle_enter+0x2e/0x3d
        do_idle+0x1ce/0x2ce
        cpu_startup_entry+0x1d/0x1f
        start_kernel+0x406/0x46a
        secondary_startup_64+0xa4/0xb0

other info that might help us debug this:

Chain exists of:
   console_owner --> &port_lock_key --> &irq_desc_lock_class

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&irq_desc_lock_class);
                                lock(&port_lock_key);
                                lock(&irq_desc_lock_class);
   lock(console_owner);

  *** DEADLOCK ***

2 locks held by swapper/0/0:
  #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba
  #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55
Hardware name: XXXXXX
Call Trace:
  <IRQ>
  dump_stack+0xbf/0x133
  ? print_circular_bug+0xd6/0xe9
  check_noncircular+0x1b9/0x1c3
  __lock_acquire+0x118d/0x2714
  lock_acquire+0x203/0x258
  ? console_lock_spinning_enable+0x31/0x57
  console_lock_spinning_enable+0x51/0x57
  ? console_lock_spinning_enable+0x31/0x57
  console_unlock+0x25d/0x528
  ? console_trylock+0x18/0x4e
  vprintk_emit+0x111/0x17f
  ? lock_acquire+0x203/0x258
  printk+0x59/0x73
  __report_bad_irq+0xa3/0xba
  note_interrupt+0x19a/0x1d6
  handle_irq_event_percpu+0x57/0x79
  handle_irq_event+0x36/0x55
  handle_fasteoi_irq+0xc2/0x18a
  do_IRQ+0xb3/0x157
  common_interrupt+0xf/0xf
  </IRQ>

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Fixes: 768aec0b5bcc ("serial: 8250: fix shared interrupts issues with SMP and RT kernels")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Raul Rangel <rrangel@google.com>
BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800
Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@mail.gmail.com/T/#u
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200817022646.1484638-1-sergey.senozhatsky@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_exar: Fix number of ports for Commtech PCIe cards

commit c6b9e95dde7b54e6a53c47241201ab5a4035c320 upstream.

The following in 8250_exar.c line 589 is used to determine the number
of ports for each Exar board:

nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f;

If the number of ports a card has is not explicitly specified, it defaults
to the rightmost 4 bits of the PCI device ID. This is prone to error since
not all PCI device IDs contain a number which corresponds to the number of
ports that card provides.

This particular case involves COMMTECH_4222PCIE, COMMTECH_4224PCIE and
COMMTECH_4228PCIE cards with device IDs 0x0022, 0x0020 and 0x0021.
Currently the multiport cards receive 2, 0 and 1 port instead of 2, 4 and
8 ports respectively.

To fix this, each Commtech Fastcom PCIe card is given a struct where the
number of ports is explicitly specified. This ensures 'board->num_ports'
is used instead of the default 'pcidev->device & 0x0f'.

Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Valmer Huhn <valmer.huhn@concurrent-rt.com>
Tested-by: Valmer Huhn <valmer.huhn@concurrent-rt.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813165255.GC345440@icarus.concurrent-rt.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: pl011: Don't leak amba_ports entry on driver register error

commit 89efbe70b27dd325d8a8c177743a26b885f7faec upstream.

pl011_probe() calls pl011_setup_port() to reserve an amba_ports[] entry,
then calls pl011_register_port() to register the uart driver with the
tty layer.

If registration of the uart driver fails, the amba_ports[] entry is not
released.  If this happens 14 times (value of UART_NR macro), then all
amba_ports[] entries will have been leaked and driver probing is no
longer possible.  (To be fair, that can only happen if the DeviceTree
doesn't contain alias IDs since they cause the same entry to be used for
a given port.)   Fix it.

Fixes: ef2889f7ffee ("serial: pl011: Move uart_register_driver call to device")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.15+
Cc: Tushar Behera <tushar.behera@linaro.org>
Link: https://lore.kernel.org/r/138f8c15afb2f184d8102583f8301575566064a6.1597316167.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: pl011: Fix oops on -EPROBE_DEFER

commit 27afac93e3bd7fa89749cf11da5d86ac9cde4dba upstream.

If probing of a pl011 gets deferred until after free_initmem(), an oops
ensues because pl011_console_match() is called which has been freed.

Fix by removing the __init attribute from the function and those it
calls.

Commit 10879ae5f12e ("serial: pl011: add console matching function")
introduced pl011_console_match() not just for early consoles but
regular preferred consoles, such as those added by acpi_parse_spcr().
Regular consoles may be registered after free_initmem() for various
reasons, one being deferred probing, another being dynamic enablement
of serial ports using a DeviceTree overlay.

Thus, pl011_console_match() must not be declared __init and the
functions it calls mustn't either.

Stack trace for posterity:

Unable to handle kernel paging request at virtual address 80c38b58
Internal error: Oops: 8000000d [#1] PREEMPT SMP ARM
PC is at pl011_console_match+0x0/0xfc
LR is at register_console+0x150/0x468
[<80187004>] (register_console)
[<805a8184>] (uart_add_one_port)
[<805b2b68>] (pl011_register_port)
[<805b3ce4>] (pl011_probe)
[<80569214>] (amba_probe)
[<805ca088>] (really_probe)
[<805ca2ec>] (driver_probe_device)
[<805ca5b0>] (__device_attach_driver)
[<805c8060>] (bus_for_each_drv)
[<805c9dfc>] (__device_attach)
[<805ca630>] (device_initial_probe)
[<805c90a8>] (bus_probe_device)
[<805c95a8>] (deferred_probe_work_func)

Fixes: 10879ae5f12e ("serial: pl011: add console matching function")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.10+
Cc: Aleksey Makarov <amakarov@marvell.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christopher Covington <cov@codeaurora.org>
Link: https://lore.kernel.org/r/f827ff09da55b8c57d316a1b008a137677b58921.1597315557.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: samsung: Removes the IRQ not found warning

commit 8c6c378b0cbe0c9f1390986b5f8ffb5f6ff7593b upstream.

In few older Samsung SoCs like s3c2410, s3c2412
and s3c2440, UART IP is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210,
exynos5433, and exynos4210 UART is having only 1
interrupt line. Due to this, "platform_get_irq(platdev, 1)"
call in the driver gives the following false-positive error:
"IRQ index 1 not found" on newer SoC's.

This patch adds the condition to check for Tx interrupt
only for the those SoC's which have 2 interrupt lines.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200810030021.45348-1-m.shams@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize()

commit bc5269ca765057a1b762e79a1cfd267cd7bf1c46 upstream.

vc_resize() can return with an error after failure. Change VT_RESIZEX ioctl
to save struct vc_data values that are modified and restore the original
values in case of error.

Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/1596213192-6635-2-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: defer kfree() of vc_screenbuf in vc_do_resize()

commit f8d1653daec02315e06d30246cff4af72e76e54e upstream.

syzbot is reporting UAF bug in set_origin() from vc_do_resize() [1], for
vc_do_resize() calls kfree(vc->vc_screenbuf) before calling set_origin().

Unfortunately, in set_origin(), vc->vc_sw->con_set_origin() might access
vc->vc_pos when scroll is involved in order to manipulate cursor, but
vc->vc_pos refers already released vc->vc_screenbuf until vc->vc_pos gets
updated based on the result of vc->vc_sw->con_set_origin().

Preserving old buffer and tolerating outdated vc members until set_origin()
completes would be easier than preventing vc->vc_sw->con_set_origin() from
accessing outdated vc members.

[1] https://syzkaller.appspot.com/bug?id=6649da2081e2ebdc65c0642c214b27fe91099db3

Reported-by: syzbot <syzbot+9116ecc1978ca3a12f43@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1596034621-4714-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: lvtest: return proper error code in probe

commit 531412492ce93ea29b9ca3b4eb5e3ed771f851dd upstream.

lvs_rh_probe() can return some nonnegative value from usb_control_msg()
when it is less than "USB_DT_HUB_NONVAR_SIZE + 2" that is considered as
a failure. Make lvs_rh_probe() return -EINVAL in this case.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200805090643.3432-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: prevent user font height or width change from causing potential out-of-bounds access

commit 39b3cffb8cf3111738ea993e2757ab382253d86a upstream.

Add a check to fbcon_resize() to ensure that a possible change to user font
height or user font width will not allow a font data out-of-bounds access.
NOTE: must use original charcount in calculation as font charcount can
change and cannot be used to determine the font data allocated size.

Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/1596213192-6635-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix space cache memory leak after transaction abort

commit bbc37d6e475eee8ffa2156ec813efc6bbb43c06d upstream.

If a transaction aborts it can cause a memory leak of the pages array of
a block group's io_ctl structure. The following steps explain how that can
happen:

1) Transaction N is committing, currently in state TRANS_STATE_UNBLOCKED
   and it's about to start writing out dirty extent buffers;

2) Transaction N + 1 already started and another task, task A, just called
   btrfs_commit_transaction() on it;

3) Block group B was dirtied (extents allocated from it) by transaction
   N + 1, so when task A calls btrfs_start_dirty_block_groups(), at the
   very beginning of the transaction commit, it starts writeback for the
   block group's space cache by calling btrfs_write_out_cache(), which
   allocates the pages array for the block group's io_ctl with a call to
   io_ctl_init(). Block group A is added to the io_list of transaction
   N + 1 by btrfs_start_dirty_block_groups();

4) While transaction N's commit is writing out the extent buffers, it gets
   an IO error and aborts transaction N, also setting the file system to
   RO mode;

5) Task A has already returned from btrfs_start_dirty_block_groups(), is at
   btrfs_commit_transaction() and has set transaction N + 1 state to
   TRANS_STATE_COMMIT_START. Immediately after that it checks that the
   filesystem was turned to RO mode, due to transaction N's abort, and
   jumps to the "cleanup_transaction" label. After that we end up at
   btrfs_cleanup_one_transaction() which calls btrfs_cleanup_dirty_bgs().
   That helper finds block group B in the transaction's io_list but it
   never releases the pages array of the block group's io_ctl, resulting in
   a memory leak.

In fact at the point when we are at btrfs_cleanup_dirty_bgs(), the pages
array points to pages that were already released by us at
__btrfs_write_out_cache() through the call to io_ctl_drop_pages(). We end
up freeing the pages array only after waiting for the ordered extent to
complete through btrfs_wait_cache_io(), which calls io_ctl_free() to do
that. But in the transaction abort case we don't wait for the space cache's
ordered extent to complete through a call to btrfs_wait_cache_io(), so
that's why we end up with a memory leak - we wait for the ordered extent
to complete indirectly by shutting down the work queues and waiting for
any jobs in them to complete before returning from close_ctree().

We can solve the leak simply by freeing the pages array right after
releasing the pages (with the call to io_ctl_drop_pages()) at
__btrfs_write_out_cache(), since we will never use it anymore after that
and the pages array points to already released pages at that point, which
is currently not a problem since no one will use it after that, but not a
good practice anyway since it can easily lead to use-after-free issues.

So fix this by freeing the pages array right after releasing the pages at
__btrfs_write_out_cache().

This issue can often be reproduced with test case generic/475 from fstests
and kmemleak can detect it and reports it with the following trace:

unreferenced object 0xffff9bbf009fa600 (size 512):
  comm "fsstress", pid 38807, jiffies 4298504428 (age 22.028s)
  hex dump (first 32 bytes):
    00 a0 7c 4d 3d ed ff ff 40 a0 7c 4d 3d ed ff ff  ..|M=...@.|M=...
    80 a0 7c 4d 3d ed ff ff c0 a0 7c 4d 3d ed ff ff  ..|M=.....|M=...
  backtrace:
    [<00000000f4b5cfe2>] __kmalloc+0x1a8/0x3e0
    [<0000000028665e7f>] io_ctl_init+0xa7/0x120 [btrfs]
    [<00000000a1f95b2d>] __btrfs_write_out_cache+0x86/0x4a0 [btrfs]
    [<00000000207ea1b0>] btrfs_write_out_cache+0x7f/0xf0 [btrfs]
    [<00000000af21f534>] btrfs_start_dirty_block_groups+0x27b/0x580 [btrfs]
    [<00000000c3c23d44>] btrfs_commit_transaction+0xa6f/0xe70 [btrfs]
    [<000000009588930c>] create_subvol+0x581/0x9a0 [btrfs]
    [<000000009ef2fd7f>] btrfs_mksubvol+0x3fb/0x4a0 [btrfs]
    [<00000000474e5187>] __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs]
    [<00000000708ee349>] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs]
    [<00000000ea60106f>] btrfs_ioctl+0x12c/0x3130 [btrfs]
    [<000000005c923d6d>] __x64_sys_ioctl+0x83/0xb0
    [<0000000043ace2c9>] do_syscall_64+0x33/0x80
    [<00000000904efbce>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON commands

commit eef4016243e94c438f177ca8226876eb873b9c75 upstream.

Before this commit i2c_hid_parse() consists of the following steps:

1. Send power on cmd
2. usleep_range(1000, 5000)
3. Send reset cmd
4. Wait for reset to complete (device interrupt, or msleep(100))
5. Send power on cmd
6. Try to read HID descriptor

Notice how there is an usleep_range(1000, 5000) after the first power-on
command, but not after the second power-on command.

Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad,
not having a delay after the second power-on command causes the HID
descriptor to read as all zeros.

In case we hit this on other devices too, the descriptor being all zeros
can be recognized by the following message being logged many, many times:

hid-generic 0018:0911:5288.0002: unknown main item tag 0x0

At the same time as the BMAX Y13's touchpad issue was debugged,
Kai-Heng was working on debugging some issues with Goodix i2c-hid
touchpads. It turns out that these need a delay after a PWR_ON command
too, otherwise they stop working after a suspend/resume cycle.
According to Goodix a delay of minimal 60ms is needed.

Having multiple cases where we need a delay after sending the power-on
command, seems to indicate that we should always sleep after the power-on
command.

This commit fixes the mentioned issues by moving the existing 1ms sleep to
the i2c_hid_set_power() function and changing it to a 60ms sleep.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-and-tested-by: Andrea Borgia <andrea@borgia.bo.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix soft lockups due to missed interrupt accounting

[ Upstream commit 17899eaf88d689529b866371344c8f269ba79b5f ]

Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().

Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.

But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.

Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: gianfar: Add of_node_put() before goto statement

[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ]

Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.

Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.

Issue found with Coccinelle.

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Clean up completed request without interrupt notification

[ Upstream commit b10178ee7fa88b68a9e8adc06534d2605cb0ec23 ]

If somehow no interrupt notification is raised for a completed request and
its doorbell bit is cleared by host, UFS driver needs to cleanup its
outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally
in the following scenario:

After ufshcd_abort() returns, this request will be requeued by SCSI layer
with its outstanding bit set. Any future completed request will trigger
ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At
this time the "abnormal outstanding bit" will be detected and the "requeued
request" will be chosen to execute request post-processing flow. This is
wrong because this request is still "alive".

Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Improve interrupt handling for shared interrupts

[ Upstream commit 127d5f7c4b653b8be5eb3b2c7bbe13728f9003ff ]

For shared interrupts, the interrupt status might be zero, so check that
first.

Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix possible infinite loop in ufshcd_hold

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: add cond_resched() in the slow_eval_known_fn() loop

[ Upstream commit 0b8eb2ee9da1e8c9b8082f404f3948aa82a057b2 ]

The scanning through subchannels during the time of an event could
take significant amount of time in case of platforms with lots of
known subchannels. This might result in higher scheduling latencies
for other tasks especially on systems with a single CPU. Add
cond_resched() call, as the loop in slow_eval_known_fn() can be
executed for a longer duration.

Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate

[ Upstream commit 9cc61973bf9385b19ff5dda4a2a7e265fcba85e4 ]

Fix spi->clk_rate when it is odd to the nearest lowest even value because
minimum SPI divider is 2.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: prevent BUG_ON in submit_bh_wbc()

[ Upstream commit 377254b2cd2252c7c3151b113cbdf93a7736c2e9 ]

If a device is hot-removed --- for example, when a physical device is
unplugged from pcie slot or a nbd device's network is shutdown ---
this can result in a BUG_ON() crash in submit_bh_wbc().  This is
because the when the block device dies, the buffer heads will have
their Buffer_Mapped flag get cleared, leading to the crash in
submit_bh_wbc.

We had attempted to work around this problem in commit a17712c8
("ext4: check superblock mapped prior to committing").  Unfortunately,
it's still possible to hit the BUG_ON(!buffer_mapped(bh)) if the
device dies between when the work-around check in ext4_commit_super()
and when submit_bh_wbh() is finally called:

Code path:
ext4_commit_super
    judge if 'buffer_mapped(sbh)' is false, return <== commit a17712c8
          lock_buffer(sbh)
          ...
          unlock_buffer(sbh)
               __sync_dirty_buffer(sbh,...
                    lock_buffer(sbh)
                        judge if 'buffer_mapped(sbh))' is false, return <== added by this patch
                            submit_bh(...,sbh)
                                submit_bh_wbc(...,sbh,...)

[100722.966497] kernel BUG at fs/buffer.c:3095! <== BUG_ON(!buffer_mapped(bh))' in submit_bh_wbc()
[100722.966503] invalid opcode: 0000 [#1] SMP
[100722.966566] task: ffff8817e15a9e40 task.stack: ffffc90024744000
[100722.966574] RIP: 0010:submit_bh_wbc+0x180/0x190
[100722.966575] RSP: 0018:ffffc90024747a90 EFLAGS: 00010246
[100722.966576] RAX: 0000000000620005 RBX: ffff8818a80603a8 RCX: 0000000000000000
[100722.966576] RDX: ffff8818a80603a8 RSI: 0000000000020800 RDI: 0000000000000001
[100722.966577] RBP: ffffc90024747ac0 R08: 0000000000000000 R09: ffff88207f94170d
[100722.966578] R10: 00000000000437c8 R11: 0000000000000001 R12: 0000000000020800
[100722.966578] R13: 0000000000000001 R14: 000000000bf9a438 R15: ffff88195f333000
[100722.966580] FS:  00007fa2eee27700(0000) GS:ffff88203d840000(0000) knlGS:0000000000000000
[100722.966580] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[100722.966581] CR2: 0000000000f0b008 CR3: 000000201a622003 CR4: 00000000007606e0
[100722.966582] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[100722.966583] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[100722.966583] PKRU: 55555554
[100722.966583] Call Trace:
[100722.966588]  __sync_dirty_buffer+0x6e/0xd0
[100722.966614]  ext4_commit_super+0x1d8/0x290 [ext4]
[100722.966626]  __ext4_std_error+0x78/0x100 [ext4]
[100722.966635]  ? __ext4_journal_get_write_access+0xca/0x120 [ext4]
[100722.966646]  ext4_reserve_inode_write+0x58/0xb0 [ext4]
[100722.966655]  ? ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966663]  ext4_mark_inode_dirty+0x53/0x1e0 [ext4]
[100722.966671]  ? __ext4_journal_start_sb+0x6d/0xf0 [ext4]
[100722.966679]  ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966682]  __mark_inode_dirty+0x17f/0x350
[100722.966686]  generic_update_time+0x87/0xd0
[100722.966687]  touch_atime+0xa9/0xd0
[100722.966690]  generic_file_read_iter+0xa09/0xcd0
[100722.966694]  ? page_cache_tree_insert+0xb0/0xb0
[100722.966704]  ext4_file_read_iter+0x4a/0x100 [ext4]
[100722.966707]  ? __inode_security_revalidate+0x4f/0x60
[100722.966709]  __vfs_read+0xec/0x160
[100722.966711]  vfs_read+0x8c/0x130
[100722.966712]  SyS_pread64+0x87/0xb0
[100722.966716]  do_syscall_64+0x67/0x1b0
[100722.966719]  entry_SYSCALL64_slow_path+0x25/0x25

To address this, add the check of 'buffer_mapped(bh)' to
__sync_dirty_buffer().  This also has the benefit of fixing this for
other file systems.

With this addition, we can drop the workaround in ext4_commit_supper().

[ Commit description rewritten by tytso. ]

Signed-off-by: Xianting Tian <xianting_tian@126.com>
Link: https://lore.kernel.org/r/1596211825-8750-1-git-send-email-xianting_tian@126.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: abort journal if free a async write error metadata buffer

[ Upstream commit c044f3d8360d2ecf831ba2cc9f08cf9fb2c699fb ]

If we free a metadata buffer which has been failed to async write out
in the background, the jbd2 checkpoint procedure will not detect this
failure in jbd2_log_do_checkpoint(), so it may lead to filesystem
inconsistency after cleanup journal tail. This patch abort the journal
if free a buffer has write_io_error flag to prevent potential further
inconsistency.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: don't BUG on inconsistent journal feature

[ Upstream commit 11215630aada28307ba555a43138db6ac54fa825 ]

A customer has reported a BUG_ON in ext4_clear_journal_err() hitting
during an LTP testing. Either this has been caused by a test setup
issue where the filesystem was being overwritten while LTP was mounting
it or the journal replay has overwritten the superblock with invalid
data. In either case it is preferable we don't take the machine down
with a BUG_ON. So handle the situation of unexpectedly missing
has_journal feature more gracefully. We issue warning and fail the mount
in the cases where the race window is narrow and the failed check is
most likely a programming error. In cases where fs corruption is more
likely, we do full ext4_error() handling before failing mount / remount.

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200710140759.18031-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: make sure jh have b_transaction set in refile/unfile_buffer

[ Upstream commit 24dc9864914eb5813173cfa53313fcd02e4aea7d ]

Callers of __jbd2_journal_unfile_buffer() and
__jbd2_journal_refile_buffer() assume that the b_transaction is set. In
fact if it's not, we can end up with journal_head refcounting errors
leading to crash much later that might be very hard to track down. Add
asserts to make sure that is the case.

We also make sure that b_next_transaction is NULL in
__jbd2_journal_unfile_buffer() since the callers expect that as well and
we should not get into that stage in this state anyway, leading to
problems later on if we do.

Tested with fstests.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_tcm: Fix some resource leaks in some error paths

[ Upstream commit 07c8434150f4eb0b65cae288721c8af1080fde17 ]

If a memory allocation fails within a 'usb_ep_alloc_request()' call, the
already allocated memory must be released.

Fix a mix-up in the code and free the correct requests.

Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rcar: in slave mode, clear NACK earlier

[ Upstream commit 914a7b3563b8fb92f976619bbd0fa3a4a708baae ]

Currently, a NACK in slave mode is set/cleared when SCL is held low by
the IP core right before the bit is about to be pushed out. This is too
late for clearing and then a NACK from the previous byte is still used
for the current one. Now, let's clear the NACK right after we detected
the STOP condition following the NACK.

Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

null_blk: fix passing of REQ_FUA flag in null_handle_rq

[ Upstream commit 2d62e6b038e729c3e4bfbfcfbd44800ef0883680 ]

REQ_FUA should be checked using rq->cmd_flags instead of req_op().

Fixes: deb78b419dfda ("nullb: emulate cache")
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fc: Fix wrong return value in __nvme_fc_init_request()

[ Upstream commit f34448cd0dc697723fb5f4118f8431d9233b370d ]

On an error exit path, a negative error code should be returned
instead of a positive return value.

Fixes: e399441de9115 ("nvme-fabrics: Add host support for FC transport")
Cc: James Smart <jsmart2021@gmail.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: gpio-ir-tx: improve precision of transmitted signal due to scheduling

[ Upstream commit ea8912b788f8144e7d32ee61e5ccba45424bef83 ]

usleep_range() may take longer than the max argument due to scheduling,
especially under load. This is causing random errors in the transmitted
IR. Remove the usleep_range() in favour of busy-looping with udelay().

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "ath10k: fix DMA related firmware crashes on multiple devices"

[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ]

This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e.
PCIe hung issue was observed on multiple platforms. The issue was reproduced
when DUT was configured as AP and associated with 50+ STAs.

For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size
of the RD/WR access to the HOST MEM.
0 - No split , RAW read/write transfer size from MAC is put out on bus
    as burst length
1 - Split at 256 byte boundary
2,3 - Reserved

With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when
issue happened. It broke PCIe spec and caused PCIe stuck. So revert
the default value from 0 to 1.

Tested:  IPQ8064 + QCA9984 with firmware 10.4-3.10-00047
         QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044
         Synaptics AS370 + QCA9888  with firmware 10.4-3.9.0.2--00040

Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: provide empty efi_enter_virtual_mode implementation

[ Upstream commit 2c547f9da0539ad1f7ef7f08c8c82036d61b011a ]

When CONFIG_EFI is not enabled, we might get an undefined reference to
efi_enter_virtual_mode() error, if this efi_enabled() call isn't inlined
into start_kernel(). This happens in particular, if start_kernel() is
annodated with __no_sanitize_address.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Link: http://lkml.kernel.org/r/6514652d3a32d3ed33d6eb5c91d0af63bf0d1a0c.1596544734.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: sisusbvga: Fix a potential UB casued by left shifting a negative value

[ Upstream commit 2b53a19284f537168fb506f2f40d7fda40a01162 ]

The char buffer buf, receives data directly from user space,
so its content might be negative and its elements are left
shifted to form an unsigned integer.

Since left shifting a negative value is undefined behavior, thus
change the char to u8 to elimintate this UB.

Signed-off-by: Changming Liu <charley.ashbringer@gmail.com>
Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/spufs: add CONFIG_COREDUMP dependency

[ Upstream commit b648a5132ca3237a0f1ce5d871fff342b0efcf8a ]

The kernel test robot pointed out a slightly different error message
after recent commit 5456ffdee666 ("powerpc/spufs: simplify spufs core
dumping") to spufs for a configuration that never worked:

   powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump':
>> file.c:(.text+0x4c68): undefined reference to `.dump_emit'
   powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump':
   file.c:(.text+0x4d70): undefined reference to `.dump_emit'
   powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump':
   file.c:(.text+0x4df4): undefined reference to `.dump_emit'

Add a Kconfig dependency to prevent this from happening again.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Fix symbol dependency in __hyp_call_panic_nvhe

[ Upstream commit b38b298aa4397e2dc74a89b4dd3eac9e59b64c96 ]

__hyp_call_panic_nvhe contains inline assembly which did not declare
its dependency on the __hyp_panic_string symbol.

The static-declared string has previously been kept alive because of a use in
__hyp_call_panic_vhe. Fix this in preparation for separating the source files
between VHE and nVHE when the two users land in two different compilation
units. The static variable otherwise gets dropped when compiling the nVHE
source file, causing an undefined symbol linker error later.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-2-dbrazdil@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: davinci: vpif_capture: fix potential double free

[ Upstream commit 602649eadaa0c977e362e641f51ec306bc1d365d ]

In case of errors vpif_probe_complete() releases memory for vpif_obj.sd
and unregisters the V4L2 device. But then this is done again by
vpif_probe() itself. The patch removes the cleaning from
vpif_probe_complete().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/ie31200: Fallback if host bridge device is already initialized

[ Upstream commit 709ed1bcef12398ac1a35c149f3e582db04456c2 ]

The Intel uncore driver may claim some of the pci ids from ie31200 which
means that the ie31200 edac driver will not initialize them as part of
pci_register_driver().

Let's add a fallback for this case to 'pci_get_device()' to get a
reference on the device such that it can still be configured. This is
similar in approach to other edac drivers.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()

[ Upstream commit e95b4789ff4380733006836d28e554dc296b2298 ]

In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then
freed it if ctlr_dev was not NULL. This was causing a memory leak.

Free the fcf even if ctlr_dev is NULL.

Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Santosh Vernekar <svernekar@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix potential mdsc use-after-free crash

[ Upstream commit fa9967734227b44acb1b6918033f9122dc7825b9 ]

Make sure the delayed work stopped before releasing the resources.

cancel_delayed_work_sync() will only guarantee that the work finishes
executing if the work is already in the ->worklist. That means after
the cancel_delayed_work_sync() returns, it will leave the work requeued
if it was rearmed at the end. That can lead to a use after free once the
work struct is freed.

Fix it by flushing the delayed work instead of trying to cancel it, and
ensure that the work doesn't rearm if the mdsc is stopping.

URL: https://tracker.ceph.com/issues/46293
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Do not put host in iscsi_set_flashnode_param()

[ Upstream commit 68e12e5f61354eb42cfffbc20a693153fc39738e ]

If scsi_host_lookup() fails we will jump to put_host which may cause a
panic. Jump to exit_set_fnode instead.

Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/lockdep: Fix overflow in presentation of average lock-time

[ Upstream commit a7ef9b28aa8d72a1656fa6f0a01bbd1493886317 ]

Though the number of lock-acquisitions is tracked as unsigned long, this
is passed as the divisor to div_s64() which interprets it as a s32,
giving nonsense values with more than 2 billion acquisitons. E.g.

  acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg
  -------------------------------------------------------------------------
    2350439395           0.07         353.38   649647067.36          0.-32

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200725185110.11588-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: Fix reference count leak in nouveau_connector_detect

[ Upstream commit 990a1162986e8eff7ca18cc5a0e03b4304392ae2 ]

nouveau_connector_detect() calls pm_runtime_get_sync and in turn
increments the reference count. In case of failure, decrement the
ref count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/drm/noveau: fix reference count leak in nouveau_fbcon_open

[ Upstream commit bfad51c7633325b5d4b32444efe04329d53297b2 ]

nouveau_fbcon_open() calls calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix use-after-free issue

[ Upstream commit 99c787cfd2bd04926f1f553b30bd7dcea2caaba1 ]

During umount, f2fs_put_super() unregisters procfs entries after
f2fs_destroy_segment_manager(), it may cause use-after-free
issue when umount races with procfs accessing, fix it by relocating
f2fs_unregister_sysfs().

[Chao Yu: change commit title/message a bit]

Signed-off-by: Li Guifu <bluce.liguifu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cec-api: prevent leaking memory through hole in structure

[ Upstream commit 6c42227c3467549ddc65efe99c869021d2f4a570 ]

Fix this smatch warning:

drivers/media/cec/core/cec-api.c:156 cec_adap_g_log_addrs() warn: check that 'log_addrs' doesn't leak information (struct has a hole after
'features')

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips/vdso: Fix resource leaks in genvdso.c

[ Upstream commit a859647b4e6bfeb192284d27d24b6a0c914cae1d ]

Close "fd" before the return of map_vdso() and close "out_file"
in main().

Signed-off-by: Peng Fan <fanpeng@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtlwifi: rtl8192cu: Prevent leaking urb

[ Upstream commit 03128643eb5453a798db5770952c73dc64fcaf00 ]

If usb_submit_urb fails the allocated urb should be unanchored and
released.

Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix pci_create_slot() reference count leak

[ Upstream commit 8a94644b440eef5a7b9c104ac8aa7a7f413e35e5 ]

kobject_init_and_add() takes a reference even when it fails. If it returns
an error, kobject_put() must be called to clean up the memory associated
with the object.

When kobject_init_and_add() fails, call kobject_put() instead of kfree().

b8eb718348b8 ("net-sysfs: Fix reference count leak in
rx|netdev_queue_add_kobject") fixed a similar problem.

Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

omapfb: fix multiple reference count leaks due to pm_runtime_get_sync

[ Upstream commit 78c2ce9bde70be5be7e3615a2ae7024ed8173087 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Cc: kjlu@umn.edu
Cc: wu000273@umn.edu
Cc: Allison Randal <allison@lohutok.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Enrico Weigelt <info@metux.net>
cc: "Andrew F. Davis" <afd@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200614030528.128064-1-pakki001@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Purge extra count_pmc() calls of ebb selftests

[ Upstream commit 3337bf41e0dd70b4064cdf60acdfcdc2d050066c ]

An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.

Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):

==========
   ...
   [21]: counter = 8
   [22]: register SPRN_MMCR0 = 0x0000000080000080
   [23]: register SPRN_PMC1  = 0x0000000080000004
   [24]: counter = 9
   [25]: register SPRN_MMCR0 = 0x0000000080000080
   [26]: register SPRN_PMC1  = 0x0000000080000004
   [27]: counter = 10
   [28]: register SPRN_MMCR0 = 0x0000000080000080
   [29]: register SPRN_PMC1  = 0x0000000080000004
>> [30]: register SPRN_PMC1  = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========

Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix shost refcount mismatch when deleting vport

[ Upstream commit 03dbfe0668e6692917ac278883e0586cd7f7d753 ]

When vports are deleted, it is observed that there is memory/kthread
leakage as the vport isn't fully being released.

There is a shost reference taken in scsi_add_host_dma that is not released
during scsi_remove_host. It was noticed that other drivers resolve this by
doing a scsi_host_put after calling scsi_remove_host.

The vport_delete routine is taking two references one that corresponds to
an access to the scsi_host in the vport_delete routine and another that is
released after the adapter mailbox command completes that destroys the VPI
that corresponds to the vport.

Remove one of the references taken such that the second reference that is
put will complete the missing scsi_add_host_dma reference and the shost
will be terminated.

Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/display: fix ref count leak when pm_runtime_get_sync fails

[ Upstream commit f79f94765f8c39db0b7dec1d335ab046aac03f20 ]

The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config

[ Upstream commit e008fa6fb41544b63973a529b704ef342f47cc65 ]

in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix ref count leak in amdgpu_drm_ioctl

[ Upstream commit 5509ac65f2fe5aa3c0003237ec629ca55024307c ]

in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix ref count leak in amdgpu_driver_open_kms

[ Upstream commit 9ba8923cbbe11564dd1bf9f3602add9a9cfbb5c6 ]

in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>