Erik Andrén [Tue, 14 Oct 2008 05:41:54 +0000 (02:41 -0300)]
V4L/DVB (9694): Indent the m5602 register definitions
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Tue, 14 Oct 2008 05:38:49 +0000 (02:38 -0300)]
V4L/DVB (9693): Remove some unused defines
The gspca conversion deprecated a number of defines. Remove them.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 18 Nov 2008 07:19:52 +0000 (04:19 -0300)]
V4L/DVB (9688): gspca: Reset the bulk URB status before resubmitting at irq level.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Mon, 17 Nov 2008 18:03:03 +0000 (15:03 -0300)]
V4L/DVB (9687): gspca: Split brightness and red and blue balance in spca501.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Mon, 17 Nov 2008 17:56:41 +0000 (14:56 -0300)]
V4L/DVB (9686): gspca: Don't return the control values from the webcams in spca501.
The bridge takes some time to update after a write, so apps doing a quick
write/read can get the old value back.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Mon, 17 Nov 2008 17:52:56 +0000 (14:52 -0300)]
V4L/DVB (9685): gspca: Correct restart of webcams in spca501.
Currently the spca501 driver only works the first time used, then the cam needs
to be unplugged or the driver reloaded, this is because currently the data
which should be send each time the stream is started is send only once.
Likewise currently the data to initialize the cam is send from the probe
function, and thus will not get send after a suspend/resume.
This patch fixes this by sending both at the right time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antonio Ospite [Fri, 14 Nov 2008 10:53:32 +0000 (07:53 -0300)]
V4L/DVB (9682): gspca: New subdriver parameter 'bulk_nurbs'.
Some webcams with image transfer by bulk messages accept one or many
permanent bulk read.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 11 Nov 2008 11:42:56 +0000 (08:42 -0300)]
V4L/DVB (9681): gspca: Rewrite the exchanges with the sensor ov7648 of sonixj.
The new exchanges are adapted from MS-win traces and the webcams work better.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 11 Nov 2008 10:10:11 +0000 (07:10 -0300)]
V4L/DVB (9680): gspca: Let gspca handle the webcam 0c45:613a instead of sn9c102.
The driver sn9c102 has no code for the ov7648 sensor.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 20 Nov 2008 08:37:05 +0000 (05:37 -0300)]
V4L/DVB (9678): af9015: Cleanup switch for usb ID
It is much more readable to swap the byteorder in the switch rather
than in each case statement.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dirk Heer [Fri, 21 Nov 2008 22:00:55 +0000 (19:00 -0300)]
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones
This Patch does modify the bttv-cards.c and bttc.h so that the driver
supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from
Phytec Messtechnik GmbH.
Signed-off-by: Dirk Heer <d.heer@phytec.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 21:47:37 +0000 (18:47 -0300)]
V4L/DVB (9676): em28xx: fix a regression caused by
22c90ec6a5e07173ee670dc2ca75e0df0a7772c0
If removing and reiserting the driver on some devices, tuner type will
be unset at the second time. This patch fixes this issue.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 21:38:29 +0000 (18:38 -0300)]
V4L/DVB (9675): em28xx: devices with xc2028/3028 don't have tda9887
This patch cleans up the entries of xc2028/3028, since those devices
don't need or use a tda9887.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 16:43:05 +0000 (13:43 -0300)]
V4L/DVB (9673): em28xx: fix Pixelview PlayTV board entry
Pixelview uses a Sigmatel stac codec. It has an external line out pin,
connected to AC97_MASTER_VOL. It also provides I2S output, but using a
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 16:39:39 +0000 (13:39 -0300)]
V4L/DVB (9672): Allow opening more than one output at the same time
Some devices use more than one AC97 outputs. This patch allows such
devices to properly work.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 15:49:33 +0000 (12:49 -0300)]
V4L/DVB (9671): em28xx: Add detection of Sigmatel Stac97xx series of AC97 devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 15:40:51 +0000 (12:40 -0300)]
V4L/DVB (9670): em28xx: allow specifying audio output
Some boards use different AC97 setups for output. This patch adds the
capability of specifying the output to be used. Currently, only one
output is selected, but the better is to allow user to select it via a
mixer, on alsa driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 15:10:44 +0000 (12:10 -0300)]
V4L/DVB (9669): em28xx: Fix a stupid cut-and-paste error
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oldrich Jedlicka [Fri, 14 Nov 2008 01:03:00 +0000 (22:03 -0300)]
V4L/DVB (9667): Fixed typo in sizeof() causing NULL pointer OOPS
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alain Kalker [Mon, 17 Nov 2008 20:20:38 +0000 (17:20 -0300)]
V4L/DVB (9665): af9015: Add support for the Digittrade DVB-T USB Stick remote
Adds support for the Digittrade DVB-T USB Stick remote.
As the Digittrade USB stick identifies itself as a generic Afatech AF9015
device, the remote cannot be autodetected. To enable it, add the following
to /etc/modprobe.d/dvb-usb-af9015 or /etc/modprobe.conf:
options dvb-usb-af9015 remote=4
Signed-off-by: Alain Kalker <miki@dds.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Mon, 17 Nov 2008 21:32:11 +0000 (18:32 -0300)]
V4L/DVB (9662): uvcvideo: Fix printk badness when printing ioctl names
Add a trailing newline character after calling v4l_printk_ioctl() to avoid
messing the kernel log up and merge the uvc_v4l2_ioctl message with the ioctl
name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Wed, 12 Nov 2008 14:46:43 +0000 (11:46 -0300)]
V4L/DVB (9661): uvcvideo: Commit streaming parameters when enabling the video stream
Sonix-based cameras seem to require the host to commit video streaming
parameters before selecting the alternate endpoint. While most applications
issue a VIDIOC_S_FMT ioctl before starting streaming, this is not required
by the V4L2 specification.
The problem has been noticed on Ubuntu 8.10 with applications using libv4l.
The library blocks VIDIOC_S_FMT calls when the requested format is identical
to the currently selected format. As the driver commits video streaming
parameters when initialising the device, only the first run of a
libv4l-enabled application would succeed.
For the sake of completeness, experiment showed that the camera keeps sending
12 bytes isochronous packets (header only, no data) without toggling the FID
bit if video streaming parameters haven't been committed before selecting the
alternate endpoint.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Hennerich [Tue, 11 Nov 2008 17:11:28 +0000 (14:11 -0300)]
V4L/DVB (9660): uvcvideo: Fix unaligned memory access.
Use the unaligned memory access macros when accessing unaligned memory.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Tue, 11 Nov 2008 17:04:30 +0000 (14:04 -0300)]
V4L/DVB (9659): uvcvideo: Use {get|set}_unaligned_le32 macros
Replace combination of endianess conversion and unaligned access macros with
{get|set}_unaligned_*.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Thu, 20 Nov 2008 12:53:05 +0000 (09:53 -0300)]
V4L/DVB (9658): em28xx: use em28xx_write_reg() for i2c clock setup
Convert the calls that write the i2c clock register over to the new
em28xx_write_reg() function that allows for or'ing bits
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Thu, 20 Nov 2008 12:52:20 +0000 (09:52 -0300)]
V4L/DVB (9657): em28xx: add a functio to write on a single register
Introduce a new function that writes to a single register. This is
useful because the vast majority of register writes are a single
register, and this format permits or'ing register value bits together.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jelle Foks [Thu, 20 Nov 2008 10:07:45 +0000 (07:07 -0300)]
V4L/DVB (9654): new email address
Please accept this patch to refer to my new email address
Signed-off-by: Jelle Foks <jelle@foks.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 12:06:09 +0000 (09:06 -0300)]
V4L/DVB (9653): em28xx: improve AC97 handling
AC97 devices provide several input and outputs. However, before this
patch, em28xx device weren't properly allowing the usage of ac97
possible combinations. Also, several input volumes were left untouched,
instead of making sure that the volumes were set on mute state.
This patch improves support for ac97 devices by allowing to use any
inputs, and making sure that unused inputs are set on mute state.
Yet, some work is still needed to select the AC97 output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 11:56:19 +0000 (08:56 -0300)]
V4L/DVB (9652): em28xx: merge AC97 vendor id's into a single var
This makes easier to identify vendor ID, since AC97 vendors are
generally identified by 3 bytes. The remaining byte is used by the
vendor to identify its devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Nov 2008 15:01:33 +0000 (12:01 -0300)]
V4L/DVB (9651): em28xx: Improve audio handling
This patch properly implements audio handling on em28xx. Before this
patch, it was assumed that every device has an Empia 202 audio chip.
However, this is not true.
After this patch, specific AC97 chipset setup and configurations can be
done.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Nov 2008 14:10:50 +0000 (11:10 -0300)]
V4L/DVB (9650): em28xx: replace magic numbers to something more meaningful
audio mux entries were described by 0 and 1 magic numers. Use an enum
alias for each entry type.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Nov 2008 14:08:53 +0000 (11:08 -0300)]
V4L/DVB (9649): em28xx: remove two amux entries used only on one card
This patch parepares for an audio refactor patch that auto-detects ac97
chips.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 19 Nov 2008 11:22:28 +0000 (08:22 -0300)]
V4L/DVB (9648): em28xx: get audio config from em28xx register
Make use of the em28xx chip configuration register to determine whether
we have AC97 audio, I2S audio, or no audio support at all.
Thanks for Ray Lu from Empia for providing the em2860/em2880 datasheet.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 18 Nov 2008 08:05:46 +0000 (05:05 -0300)]
V4L/DVB (9644): em28xx: add em2750 to the list of known em28xx chip ids
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 18 Nov 2008 01:40:36 +0000 (22:40 -0300)]
V4L/DVB (9643): em28xx: remove the previous register names
Previously, AC97 registers were named as if they were part of em28xx
device, generating some confusion. Replace such names for a more general
naming convention.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 18 Nov 2008 01:30:09 +0000 (22:30 -0300)]
V4L/DVB (9642): Add AC97 registers found on em28xx devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 16 Nov 2008 13:40:21 +0000 (10:40 -0300)]
V4L/DVB (9641): Add chip ID's for em2820 and em2840
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Thu, 13 Nov 2008 02:18:21 +0000 (23:18 -0300)]
V4L/DVB (9638): drivers/media: use ARRAY_SIZE
ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@i@
@@
@depends on i using "paren.iso"@
type T;
T[] E;
@@
- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)
@depends on i using "paren.iso"@
type T;
T[] E;
@@
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Harvey Harrison [Fri, 14 Nov 2008 21:19:56 +0000 (18:19 -0300)]
V4L/DVB (9637): usb vendor_ids/product_ids are __le16
Noticed by sparse:
drivers/media/dvb/dvb-usb/af9015.c:756:25: warning: restricted __le16 degrades to integer
drivers/media/dvb/dvb-usb/af9015.c:744:28: warning: restricted __le16 degrades to integer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Harvey Harrison [Sat, 15 Nov 2008 04:08:45 +0000 (01:08 -0300)]
V4L/DVB (9636): dvb: cinergyt2 annotate struct endianness, remove unused variable, add static
All noticed by sparse:
drivers/media/dvb/dvb-usb/cinergyT2-core.c:35:5: warning: symbol 'disable_remote' was not declared. Should it be static?
drivers/media/dvb/dvb-usb/cinergyT2-core.c:48:23: warning: symbol 'cinergyt2_usb_device' was not declared. Should it be static?
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:160:15: warning: cast to restricted __le16
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:190:9: warning: cast to restricted __le32
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:208:9: warning: cast to restricted __le32
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:227:24: warning: cast to restricted __le16
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: warning: incorrect type in assignment (different base types)
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: expected unsigned short [unsigned] [assigned] [usertype] tps
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: got restricted __le16 [usertype] <noident>
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: warning: incorrect type in assignment (different base types)
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: expected unsigned int [unsigned] [assigned] [usertype] freq
drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: got restricted __le32 [usertype] <noident>
Cc: Thierry Merle <thierry.merle@free.fr>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sun, 16 Nov 2008 06:39:50 +0000 (03:39 -0300)]
V4L/DVB (9633): Put s5h1411 into low power mode at end of attach() call
Place the s5h1411 into low power mode until first use (to handle the case where
the user plugs in the device and then doesn't use it for a while). On the
Pinnacle 801e, this brings the power usage from 126ma down to 82ma.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 16 Nov 2008 11:05:06 +0000 (08:05 -0300)]
V4L/DVB (9630): Some boards need to specify tuner address
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sun, 16 Nov 2008 11:03:53 +0000 (08:03 -0300)]
V4L/DVB (9629): Add support for the ATI TV Wonder HD 600 USB Remote Control
Add support for the ATI TV Wonder HD 600 USB Remote Control
(required a new keymap)
[mchehab@redhat.com: Fix CodingStyle]
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Thu, 13 Nov 2008 06:15:55 +0000 (03:15 -0300)]
V4L/DVB (9628): em28xx: refactor IR support
Refactor the em28xx IR support based on the em2860/em2880 and em2874
datasheets.
Tested on the HVR-950 (em2883), Pinnacle 800e (em2883), Pinnacle 80e (em2874)
using the remote controls that came with those products.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 12 Nov 2008 21:46:01 +0000 (18:46 -0300)]
V4L/DVB (9612): Fix key repetition with HVR-950 IR
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 12 Nov 2008 17:05:46 +0000 (14:05 -0300)]
V4L/DVB (9611): em28xx: experimental support for HVR-950 IR
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 12 Nov 2008 11:41:29 +0000 (08:41 -0300)]
V4L/DVB (9607): em28xx: Properly implement poll support for IR's
The first em28xx were based on i2c IR's. However, some newer designs
are coming with a polling-based IR. Those are done by reading a register
set at em28xx.
This patch adds core polling support for those devices. Later patches will
add support for some device-specific IR's.
This patch adds the same basic IR polling code used by bttv, cx88 and saa7134, and
shares the common getkey masks defined at ir-common.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 12 Nov 2008 04:03:02 +0000 (01:03 -0300)]
V4L/DVB (9591): v4l core: fix debug printk for enumberating framerates
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:05:28 +0000 (02:05 -0300)]
V4L/DVB (9590): Add registration for Pinnacle 80e ATSC tuner
Add registration for Pinnacle 80e ATSC tuner
Register the em2874 based Pinnacle 80e device. Note that support for this
device also requires the new drx-j driver (which is not available yet)
Thanks for Ray Lu from Empia for providing the em2874 datasheet.
Thanks to Joerg Schindler from Pinnacle for providing sample hardware.
Thanks to Rainer Miethling from Pinnacle for providing engineering support.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:05:24 +0000 (02:05 -0300)]
V4L/DVB (9589): Properly support capture start on em2874
Properly support capture start on em2874
The transport stream enable register moved in the em2874, so make it work
properly.
Thanks for Ray Lu from Empia for providing the em2874 datasheet.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:05:19 +0000 (02:05 -0300)]
V4L/DVB (9588): Don't load em28xx audio module for digital-only devices
Rework the logic so that the em28xx-alsa module does not get loaded for devices
that don't support analog audio (such as the em2874)
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:02:17 +0000 (02:02 -0300)]
V4L/DVB (9587): Handle changes to endpoint layout in em2874
Empia moved around their endpoint configuration in newer chips, so accommodate
the changes
Thanks for Ray Lu from Empia for providing the em2874 datasheet.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:05:15 +0000 (02:05 -0300)]
V4L/DVB (9586): Fix possible null pointer dereference in info message
Fix case where we could end up dereferencing a NULL pointer if dev->vdev or
dev->vbi_dev were not set properly.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:05:10 +0000 (02:05 -0300)]
V4L/DVB (9585): Skip reading eeprom in newer Empia devices
Empia switched to a 16-bit addressable eeprom in newer devices. While we
could certainly write a routine to read the eeprom, there is nothing of use
in there that cannot be accessed through registers, and there is the risk that
we could corrupt the eeprom (since a 16-bit read call is interpreted as a
write call by 8-bit eeproms). So just be safe and bail out of the function.
Thanks for Ray Lu from Empia for providing the em2874 datasheet.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:05:06 +0000 (02:05 -0300)]
V4L/DVB (9584): Support different GPIO/GPO registers for newer devices
Empia moved the location of the GPIO/GPO registers in newer devices. Add the
ability to specify the relocated registers (including caching of register
contents).
Thanks for Ray Lu from Empia for providing the em2874 datasheet.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:05:02 +0000 (02:05 -0300)]
V4L/DVB (9583): Remember chip id of devices at initialization
When setting up the device, remember the chip id, so we can control behavior
in the future without having to read the register continuously.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:04:57 +0000 (02:04 -0300)]
V4L/DVB (9582): Add a EM28XX_NODECODER option to the list of available decoders
Add a EM28XX_NODECODER option to the list of available decoders. This option
becomes important for devices that do not have analog support.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:04:53 +0000 (02:04 -0300)]
V4L/DVB (9581): Remove unused variable from em28xx-audio.c
Remove unused variable from em28xx-audio.c
Fix warning for unused "ret" variable
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 12 Nov 2008 05:04:48 +0000 (02:04 -0300)]
V4L/DVB (9580): Add chip id for em2874 to list of known chips
Add em2874 chip id
Add chip id for em2874 to list of known chips
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 12 Nov 2008 00:15:03 +0000 (21:15 -0300)]
V4L/DVB (9579): v4l core: a few get ioctls were lacking memory clean
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 12 Nov 2008 00:13:47 +0000 (21:13 -0300)]
V4L/DVB (9578): v4l core: add support for enumerating frame sizes and intervals
video_ioctl2 lacks implementation of those two ioctls:
- VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS
Adds implementation for those.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Darron Broad [Tue, 11 Nov 2008 11:50:02 +0000 (08:50 -0300)]
V4L/DVB (9577): saa7134-dvb: MFE attachment clean-up for saa-7134 dvb
This cleans-up MFE attachment for saa-7134 dvb
devices.
note: MFE is not fully implemented here yet.
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Darron Broad [Tue, 11 Nov 2008 11:48:27 +0000 (08:48 -0300)]
V4L/DVB (9576): cx88-dvb: MFE attachment clean-up for HVR-3000/4000
This cleans-up MFE attachment for these cards plus
two cases of potential memory leak on attachment
failure.
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 11 Nov 2008 01:35:00 +0000 (23:35 -0200)]
V4L/DVB (9572a): Whitespace cleanup
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sat, 8 Nov 2008 22:14:50 +0000 (19:14 -0300)]
V4L/DVB (9570): uvcvideo: Handle failed video GET_{MIN|MAX|DEF} requests more gracefully
Failed requests will now generate a one-time warning message instead of the
usual "Failed to query..." error, which should be more user-friendly. The
driver will also recover automatically from failed GET_MIN/GET_MAX requests
when the device is half-broken without requiring the MINMAX quirk (fully
broken devices still need the quirk).
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Mon, 10 Nov 2008 07:45:51 +0000 (04:45 -0300)]
V4L/DVB (9563): gspca: Let gspca handle the webcam 0471:0328 instead of sn9c102.
According to http://bugzilla.kernel.org/show_bug.cgi?id=11997,
the driver sn9c102 does not work for this webcam.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Fri, 7 Nov 2008 07:53:28 +0000 (04:53 -0300)]
V4L/DVB (9560): gspca: Let gspca handle the webcam 0c45:602c instead of sn9c102.
According to http://bugzilla.kernel.org/show_bug.cgi?id=11920,
the driver sn9c102 does not work for this webcam.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Frederic Cand [Sat, 25 Oct 2008 08:03:19 +0000 (05:03 -0300)]
V4L/DVB (9548): gspca: Fix Kconfig CodingStyle
Signed-off-by: Frederic Cand <frederic.cand@anevia.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Sat, 8 Nov 2008 03:31:50 +0000 (00:31 -0300)]
V4L/DVB (9540): dsbr100: add disabled controls and fix version
Patch adds disabled controls in
v4l2_queryctrl struct. Also version of driver corrected.
--
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Sat, 8 Nov 2008 03:40:46 +0000 (00:40 -0300)]
V4L/DVB (9539): dsbr100: add suspend and resume
This patch adds support for suspend and resume methods in driver.
Without this kradio and gnomeradio crashes during resume.
Also .supports_autosuspend in usb_driver struct set equal to 0 to avoid
suspending of module if usb_autosuspend enabled.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 10 Nov 2008 21:56:20 +0000 (18:56 -0300)]
V4L/DVB (9572): Whitespace cleanup
Some recent patches added a few bad whitespaces. Remove that.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sat, 8 Nov 2008 21:53:49 +0000 (18:53 -0300)]
V4L/DVB (9569): uvcvideo: Sort the frame descriptors during parsing
The UVC specification does not require frame descriptors to be sorted by
bFrameIndex. At least one camera (145f:013e) is known not to sort the
descriptors properly, so they need to be sorted during parsing as the driver
then accesses them by index.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sat, 8 Nov 2008 21:52:04 +0000 (18:52 -0300)]
V4L/DVB (9568): uvcvideo: Add support for Lenovo Thinkpad SL500 integrated webcam
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sat, 8 Nov 2008 21:47:28 +0000 (18:47 -0300)]
V4L/DVB (9567): uvcvideo: Add support for Samsung Q310 integrated webcam
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Mon, 10 Nov 2008 08:56:55 +0000 (05:56 -0300)]
V4L/DVB (9565): gspca: Remove empty lines in traces.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 8 Nov 2008 09:10:19 +0000 (06:10 -0300)]
V4L/DVB (9562): gspca: Set the default frame rate to 30 fps for sensor ov764x in ov519.
This patch fixes the bad picture at low resolution (320x240).
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 8 Nov 2008 09:03:37 +0000 (06:03 -0300)]
V4L/DVB (9561): gspca: Cleanup the source of ov519.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 28 Oct 2008 11:00:23 +0000 (08:00 -0300)]
V4L/DVB (9553): gspca: Webcam 145f:013a added in pac207.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Mon, 27 Oct 2008 07:43:49 +0000 (04:43 -0300)]
V4L/DVB (9552): gspca: Simplify the ISOC packet scanning in tv8532.
This patch
- makes unuseful the temporary buffers
- and also fixes the bad colors problem.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Frederic Cand [Mon, 10 Nov 2008 22:05:06 +0000 (20:05 -0200)]
V4L/DVB (9548): gspca: Properly indent Kconfig
Signed-off-by: Frederic Cand <frederic.cand@anevia.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Fri, 24 Oct 2008 08:02:58 +0000 (05:02 -0300)]
V4L/DVB (9547): gspca: Version change.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Fri, 24 Oct 2008 07:19:29 +0000 (04:19 -0300)]
V4L/DVB (9546): gspca: Bad scanning of ISOC packets in tv8532.
- The scan function must know about empty packets.
- Packets starting with 0x80 must not be counted.
- Wrong size of the translated frame.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Thu, 23 Oct 2008 10:29:51 +0000 (07:29 -0300)]
V4L/DVB (9545): gspca: Add a flag for empty ISOC packets.
- This flag is needed by some subdrivers as tv8532 for start
of frame detection.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Wed, 22 Oct 2008 17:51:56 +0000 (14:51 -0300)]
V4L/DVB (9544): gspca: Clear the bulk endpoint at starting time when bulk transfer.
- usb_clear_halt() added in gspca and removed in finepix.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Wed, 22 Oct 2008 07:59:29 +0000 (04:59 -0300)]
V4L/DVB (9543): gspca: Adjust autoexpo values for cams with a vga sensor in sonixb.
- This patch makes sonixb.c strife to different values during autoexposure
for sif versus vga sensors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Fri, 17 Oct 2008 10:48:24 +0000 (07:48 -0300)]
V4L/DVB (9541): gspca: Add infrared control for sonixj - mi0360.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Thu, 6 Nov 2008 01:12:56 +0000 (22:12 -0300)]
V4L/DVB (9537): Add TerraTec Cinergy S USB support
Add TerraTec Cinergy S USB support
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Acked-by: Thorsten Leupold <th86@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Vincent Pelletier [Sun, 9 Nov 2008 16:50:07 +0000 (13:50 -0300)]
V4L/DVB (9536): WinFast DTV2000 H: add support for missing analog inputs
Add support for the following inputs:
- radio tuner
- composite 1 & 2 (only 1 is physically available, but composite 2 is also
advertised by windows driver)
- svideo
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sun, 9 Nov 2008 17:59:33 +0000 (14:59 -0300)]
V4L/DVB (9535): cx88-dvb: Remove usage core->prev_set_voltage from cx24116 based cards.
Remove usage core->prev_set_voltage from cx24116 based cards,
as it does not make sense for the demod.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sun, 9 Nov 2008 18:26:25 +0000 (15:26 -0300)]
V4L/DVB (9534): cx88: Add support for Prof 6200 DVB-S PCI card
The card based on stv0299 or stv0288 demodulators.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sun, 9 Nov 2008 18:25:31 +0000 (15:25 -0300)]
V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card
The card based on stv0299 or stv0288 demodulators.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 7 Nov 2008 17:24:18 +0000 (14:24 -0300)]
V4L/DVB (9532): Properly handle error messages during alsa registering
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Fri, 31 Oct 2008 01:04:56 +0000 (22:04 -0300)]
V4L/DVB (9520): stb0899 Remove double .read_status assignment
Currently in stb0899 code it appears double .read_status assignment
Send patch to fix it.
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 2 Nov 2008 21:54:10 +0000 (18:54 -0300)]
V4L/DVB (9514): cx18: Fix PLL freq computation for debug display
cx18: Fix PLL freq computation for debug display.
The code to compute the PLL freq from register values was storing an
intermediate 56 bit result in a 32 bit type, causing a nonsense value to
be displayed.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Robert Jarzmik [Wed, 5 Nov 2008 00:59:37 +0000 (21:59 -0300)]
V4L/DVB (9530): Add new pixel format VYUY 16 bits wide.
There were already 3 YUV formats defined :
- YUYV
- YVYU
- UYVY
The only left combination is VYUY, which is added in this
patch.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrice Levesque [Sun, 2 Nov 2008 19:37:35 +0000 (16:37 -0300)]
V4L/DVB (9529): cx88: add a second PCI ID for ATI TV Wonder Pro
There's a second PCI identifier for the ATI TV WONDER PRO card
(0x1002:0x00f9).
Attached is a patch to kernel 2.6.27 that adds autodetection for this
version.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 4 Nov 2008 15:57:47 +0000 (12:57 -0300)]
V4L/DVB (9526): af9015: add support for KWorld USB DVB-T TV Stick II (VS-DVBT 395U)
- add USB-ID 1b80:e396 for KWorld USB DVB-T TV Stick II (VS-DVBT 395U)
Thanks-to: Bo Hansen <bohans@online.no>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jose Alberto Reguero [Tue, 4 Nov 2008 14:38:01 +0000 (11:38 -0300)]
V4L/DVB (9525): af9015: add support for AverMedia Volar X remote.
This patch add support for AverMedia Volar X remote.
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alan McIvor [Thu, 20 Mar 2008 01:18:11 +0000 (22:18 -0300)]
V4L/DVB (9523): Increase number of BT8XX devices supported in a system
The BT8XX device driver currently only supports 16 such devices in a
system. This is too small for many surveillance applications. This
patch increases the number to 32.
Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alan McIvor [Thu, 20 Mar 2008 01:17:24 +0000 (22:17 -0300)]
V4L/DVB (9522): Increase number of SAA7134 devices supported in a system
The SAA7134 device driver currently only supports 8 such devices in a
system. This is too small for many surveillance applications. This
patch increases the number to 32.
Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>