From: Mathias Nyman Date: Mon, 21 Sep 2015 14:46:09 +0000 (+0300) Subject: usb: Use the USB_SS_MULT() macro to get the burst multiplier. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ff30cbc8da425754e8ab96904db1d295bd034f27;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git usb: Use the USB_SS_MULT() macro to get the burst multiplier. Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index b2a540b43f97..b9ddf0c1ffe5 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -112,7 +112,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, cfgno, inum, asnum, ep->desc.bEndpointAddress); ep->ss_ep_comp.bmAttributes = 16; } else if (usb_endpoint_xfer_isoc(&ep->desc) && - desc->bmAttributes > 2) { + USB_SS_MULT(desc->bmAttributes) > 3) { dev_warn(ddev, "Isoc endpoint has Mult of %d in " "config %d interface %d altsetting %d ep %d: " "setting to 3\n", desc->bmAttributes + 1, @@ -121,7 +121,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, } if (usb_endpoint_xfer_isoc(&ep->desc)) - max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) * + max_tx = (desc->bMaxBurst + 1) * + (USB_SS_MULT(desc->bmAttributes)) * usb_endpoint_maxp(&ep->desc); else if (usb_endpoint_xfer_int(&ep->desc)) max_tx = usb_endpoint_maxp(&ep->desc) *