From: Emmanuel Grumbach Date: Wed, 11 Dec 2013 07:24:39 +0000 (+0200) Subject: iwlwifi: pcie: no need to save inta in trans_pcie X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=fe523dc9e90569656b19229d08b27d6cd55f9700;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git iwlwifi: pcie: no need to save inta in trans_pcie This was useful when the handling was not in the same context as the interrupt cause retrieval: we could have several hard interrupts until the handler gets called. Since we retrieve the interrupt cause in the handler itself, there is no need to OR the interrupt causes. Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 6a32eccf71c9..9dfee7ed2e3e 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -273,7 +273,6 @@ struct iwl_trans_pcie { __le32 *ict_tbl; dma_addr_t ict_tbl_dma; int ict_index; - u32 inta; bool use_ict; struct isr_statistics isr_stats; diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index a042c4a80465..9e019e59f473 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -838,18 +838,16 @@ static u32 iwl_pcie_int_cause_non_ict(struct iwl_trans *trans) * the handler can be scheduled because of a previous * interrupt. */ - if (test_bit(STATUS_INT_ENABLED, &trans->status) && - !trans_pcie->inta) + if (test_bit(STATUS_INT_ENABLED, &trans->status) && !inta) iwl_enable_interrupts(trans); - return trans_pcie->inta; + return inta; } if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { /* Hardware disappeared. It might have already raised * an interrupt */ IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta); - trans_pcie->inta = 0xFFFFFFFF; - return trans_pcie->inta; + return 0xFFFFFFFF; } if (iwl_have_debug_level(IWL_DL_ISR)) @@ -858,9 +856,8 @@ static u32 iwl_pcie_int_cause_non_ict(struct iwl_trans *trans) inta, trans_pcie->inta_mask, iwl_read32(trans, CSR_FH_INT_STATUS)); - trans_pcie->inta |= inta; /* the thread will service interrupts and re-enable them */ - return trans_pcie->inta; + return inta; } /* a device (PCI-E) page is 4096 bytes long */ @@ -934,21 +931,19 @@ static u32 iwl_pcie_int_cause_ict(struct iwl_trans *trans) iwl_read32(trans, CSR_INT_MASK)); inta &= trans_pcie->inta_mask; - trans_pcie->inta |= inta; /* iwl_pcie_tasklet() will service interrupts and re-enable them */ if (likely(inta)) - return trans_pcie->inta; + return inta; none: /* re-enable interrupts here since we don't have anything to service. * only Re-enable if disabled by irq. */ - if (test_bit(STATUS_INT_ENABLED, &trans->status) && - !trans_pcie->inta) + if (test_bit(STATUS_INT_ENABLED, &trans->status) && !inta) iwl_enable_interrupts(trans); - return trans_pcie->inta; + return inta; } irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) @@ -1001,9 +996,6 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n", inta, iwl_read32(trans, CSR_INT_MASK)); - /* saved interrupt in inta variable now we can reset trans_pcie->inta */ - trans_pcie->inta = 0; - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); /* Now service all interrupt bits discovered above. */