From: Axel Lin Date: Mon, 10 Feb 2014 14:26:40 +0000 (+0800) Subject: spi: topcliff-pch: Convert to use master->max_speed_hz X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=fe3a1ad0c60d7ac405f52b5c76ef45c22e054d0c;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git spi: topcliff-pch: Convert to use master->max_speed_hz Set "master->max_speed_hz = PCH_MAX_BAUDRATE" then we can remove pch_spi_setup. In additional, pspi->max_speed_hz will never be 0 because it's default value will be set to master->max_speed_hz. Also remove list_empty checking in pch_spi_transfer() because the checking is done by spi core. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 2e7f38c7a961..6304c91e6965 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -464,20 +464,6 @@ static void pch_spi_reset(struct spi_master *master) pch_spi_writereg(master, PCH_SRST, 0x0); } -static int pch_spi_setup(struct spi_device *pspi) -{ - /* Check baud rate setting */ - /* if baud rate of chip is greater than - max we can support,return error */ - if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) - pspi->max_speed_hz = PCH_MAX_BAUDRATE; - - dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, - (pspi->mode) & (SPI_CPOL | SPI_CPHA)); - - return 0; -} - static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) { @@ -486,23 +472,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) int retval; unsigned long flags; - /* validate spi message and baud rate */ - if (unlikely(list_empty(&pmsg->transfers) == 1)) { - dev_err(&pspi->dev, "%s list empty\n", __func__); - retval = -EINVAL; - goto err_out; - } - - if (unlikely(pspi->max_speed_hz == 0)) { - dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n", - __func__, pspi->max_speed_hz); - retval = -EINVAL; - goto err_out; - } - - dev_dbg(&pspi->dev, - "%s Transfer List not empty. Transfer Speed is set.\n", __func__); - spin_lock_irqsave(&data->lock, flags); /* validate Tx/Rx buffers and Transfer length */ list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { @@ -523,10 +492,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length valid\n", __func__); - - /* if baud rate has been specified validate the same */ - if (transfer->speed_hz > PCH_MAX_BAUDRATE) - transfer->speed_hz = PCH_MAX_BAUDRATE; } spin_unlock_irqrestore(&data->lock, flags); @@ -1418,10 +1383,10 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev) /* initialize members of SPI master */ master->num_chipselect = PCH_MAX_CS; - master->setup = pch_spi_setup; master->transfer = pch_spi_transfer; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); + master->max_speed_hz = PCH_MAX_BAUDRATE; data->board_dat = board_dat; data->plat_dev = plat_dev;