From: Tejun Heo Date: Mon, 10 May 2010 19:41:39 +0000 (+0200) Subject: libata-sff: separate out BMDMA EH X-Git-Tag: MMI-PSA29.97-13-9~23881^2~3 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=fe06e5f9b7c61dc567edace3f4909672067f7d7e;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git libata-sff: separate out BMDMA EH Some of error handling logic in ata_sff_error_handler() and all of ata_sff_post_internal_cmd() are for BMDMA. Create ata_bmdma_error_handler() and ata_bmdma_post_internal_cmd() and move BMDMA part into those. While at it, change DMA protocol check to ata_is_dma(), fix post_internal_cmd to call ap->ops->bmdma_stop instead of directly calling ata_bmdma_stop() and open code hardreset selection so that ata_std_error_handler() doesn't have to know about sff hardreset. As these two functions are BMDMA specific, there's no reason to check for bmdma_addr before calling bmdma methods if the protocol of the failed command is DMA. sata_mv and pata_mpc52xx now don't need to set .post_internal_cmd to ATA_OP_NULL and pata_icside and sata_qstor don't need to set it to their bmdma_stop routines. ata_sff_post_internal_cmd() becomes noop and is removed. This fixes p3 described in clean-up-BMDMA-initialization patch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index d6e67488174c..f77a67303f8b 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3684,7 +3684,7 @@ void ata_std_error_handler(struct ata_port *ap) ata_reset_fn_t hardreset = ops->hardreset; /* ignore built-in hardreset if SCR access is not available */ - if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link)) + if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link)) hardreset = NULL; ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e78ad76861f4..aa378c04ed87 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -56,7 +56,6 @@ const struct ata_port_operations ata_sff_port_ops = { .hardreset = sata_sff_hardreset, .postreset = ata_sff_postreset, .error_handler = ata_sff_error_handler, - .post_internal_cmd = ata_sff_post_internal_cmd, .sff_dev_select = ata_sff_dev_select, .sff_check_status = ata_sff_check_status, @@ -2361,7 +2360,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc) EXPORT_SYMBOL_GPL(ata_sff_drain_fifo); /** - * ata_sff_error_handler - Stock error handler for BMDMA controller + * ata_sff_error_handler - Stock error handler for SFF controller * @ap: port to handle error for * * Stock error handler for SFF controller. It can handle both @@ -2378,64 +2377,32 @@ void ata_sff_error_handler(struct ata_port *ap) ata_reset_fn_t hardreset = ap->ops->hardreset; struct ata_queued_cmd *qc; unsigned long flags; - bool thaw = false; qc = __ata_qc_from_tag(ap, ap->link.active_tag); if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) qc = NULL; - /* reset PIO HSM and stop DMA engine */ spin_lock_irqsave(ap->lock, flags); - if (ap->ioaddr.bmdma_addr && - qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA)) { - u8 host_stat; - - host_stat = ap->ops->bmdma_status(ap); - - /* BMDMA controllers indicate host bus error by - * setting DMA_ERR bit and timing out. As it wasn't - * really a timeout event, adjust error mask and - * cancel frozen state. - */ - if (qc->err_mask == AC_ERR_TIMEOUT - && (host_stat & ATA_DMA_ERR)) { - qc->err_mask = AC_ERR_HOST_BUS; - thaw = true; - } - - ap->ops->bmdma_stop(qc); - - /* if we're gonna thaw, make sure IRQ is clear */ - if (thaw) { - ap->ops->sff_check_status(ap); - ap->ops->sff_irq_clear(ap); - - spin_unlock_irqrestore(ap->lock, flags); - ata_eh_thaw_port(ap); - spin_lock_irqsave(ap->lock, flags); - } - } - - /* We *MUST* do FIFO draining before we issue a reset as several - * devices helpfully clear their internal state and will lock solid - * if we touch the data port post reset. Pass qc in case anyone wants - * to do different PIO/DMA recovery or has per command fixups + /* + * We *MUST* do FIFO draining before we issue a reset as + * several devices helpfully clear their internal state and + * will lock solid if we touch the data port post reset. Pass + * qc in case anyone wants to do different PIO/DMA recovery or + * has per command fixups */ if (ap->ops->sff_drain_fifo) ap->ops->sff_drain_fifo(qc); spin_unlock_irqrestore(ap->lock, flags); - /* PIO and DMA engines have been stopped, perform recovery */ - - /* Ignore ata_sff_softreset if ctl isn't accessible and - * built-in hardresets if SCR access isn't available. - */ + /* ignore ata_sff_softreset if ctl isn't accessible */ if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr) softreset = NULL; - if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link)) + + /* ignore built-in hardresets if SCR access is not available */ + if ((hardreset == sata_std_hardreset || + hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link)) hardreset = NULL; ata_do_eh(ap, ap->ops->prereset, softreset, hardreset, @@ -2443,27 +2410,6 @@ void ata_sff_error_handler(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_sff_error_handler); -/** - * ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller - * @qc: internal command to clean up - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - spin_lock_irqsave(ap->lock, flags); - - if (ap->ioaddr.bmdma_addr) - ap->ops->bmdma_stop(qc); - - spin_unlock_irqrestore(ap->lock, flags); -} -EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd); - /** * ata_sff_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized @@ -2811,6 +2757,9 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); const struct ata_port_operations ata_bmdma_port_ops = { .inherits = &ata_sff_port_ops, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -2828,6 +2777,84 @@ const struct ata_port_operations ata_bmdma32_port_ops = { }; EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); +/** + * ata_bmdma_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + * + * Stock error handler for BMDMA controller. It can handle both + * PATA and SATA controllers. Most BMDMA controllers should be + * able to use this EH as-is or with some added handling before + * and after. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_error_handler(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + bool thaw = false; + + qc = __ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + /* reset PIO HSM and stop DMA engine */ + spin_lock_irqsave(ap->lock, flags); + + if (qc && ata_is_dma(qc->tf.protocol)) { + u8 host_stat; + + host_stat = ap->ops->bmdma_status(ap); + + /* BMDMA controllers indicate host bus error by + * setting DMA_ERR bit and timing out. As it wasn't + * really a timeout event, adjust error mask and + * cancel frozen state. + */ + if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { + qc->err_mask = AC_ERR_HOST_BUS; + thaw = true; + } + + ap->ops->bmdma_stop(qc); + + /* if we're gonna thaw, make sure IRQ is clear */ + if (thaw) { + ap->ops->sff_check_status(ap); + ap->ops->sff_irq_clear(ap); + } + } + + spin_unlock_irqrestore(ap->lock, flags); + + if (thaw) + ata_eh_thaw_port(ap); + + ata_sff_error_handler(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); + +/** + * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for BMDMA + * @qc: internal command to clean up + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ata_is_dma(qc->tf.protocol)) { + spin_lock_irqsave(ap->lock, flags); + ap->ops->bmdma_stop(qc); + spin_unlock_irqrestore(ap->lock, flags); + } +} +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); + /** * ata_bmdma_setup - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 002390cdc041..4b84ed60324a 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -38,17 +38,6 @@ struct ata_scsi_args { void (*done)(struct scsi_cmnd *); }; -static inline int ata_is_builtin_hardreset(ata_reset_fn_t reset) -{ - if (reset == sata_std_hardreset) - return 1; -#ifdef CONFIG_ATA_SFF - if (reset == sata_sff_hardreset) - return 1; -#endif - return 0; -} - /* libata-core.c */ enum { /* flags for ata_dev_read_id() */ diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index ee85a9ce0a11..b56e8f722d20 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -333,7 +333,6 @@ static struct ata_port_operations pata_icside_port_ops = { .cable_detect = ata_cable_40wire, .set_dmamode = pata_icside_set_dmamode, .postreset = pata_icside_postreset, - .post_internal_cmd = pata_icside_bmdma_stop, .port_start = ATA_OP_NULL, /* don't need PRD table */ }; diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 70d549e28f0f..93f690e51a79 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -951,7 +951,6 @@ static struct ata_port_operations scc_pata_ops = { .prereset = scc_pata_prereset, .softreset = scc_softreset, .postreset = scc_postreset, - .post_internal_cmd = scc_bmdma_stop, .sff_irq_clear = scc_irq_clear, diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index a007b20c1991..64e99824d8c1 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1131,7 +1131,7 @@ static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc) struct nv_adma_port_priv *pp = qc->ap->private_data; if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) - ata_sff_post_internal_cmd(qc); + ata_bmdma_post_internal_cmd(qc); } static int nv_adma_port_start(struct ata_port *ap) @@ -1739,7 +1739,7 @@ static void nv_adma_error_handler(struct ata_port *ap) readw(mmio + NV_ADMA_CTL); /* flush posted write */ } - ata_sff_error_handler(ap); + ata_bmdma_error_handler(ap); } static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc) @@ -1865,7 +1865,7 @@ static void nv_swncq_error_handler(struct ata_port *ap) ehc->i.action |= ATA_EH_RESET; } - ata_sff_error_handler(ap); + ata_bmdma_error_handler(ap); } #ifdef CONFIG_PM diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index e80628a77669..09a6179f5de3 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -839,7 +839,7 @@ static void pdc_error_handler(struct ata_port *ap) if (!(ap->pflags & ATA_PFLAG_FROZEN)) pdc_reset_port(ap); - ata_std_error_handler(ap); + ata_sff_error_handler(ap); } static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index da84ea9e4fb0..d3a22f2ae7b6 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -147,7 +147,6 @@ static struct ata_port_operations qs_ata_ops = { .prereset = qs_prereset, .softreset = ATA_OP_NULL, .error_handler = qs_error_handler, - .post_internal_cmd = ATA_OP_NULL, .lost_interrupt = ATA_OP_NULL, .scr_read = qs_scr_read, @@ -255,7 +254,7 @@ static int qs_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) static void qs_error_handler(struct ata_port *ap) { qs_enter_reg_mode(ap); - ata_std_error_handler(ap); + ata_sff_error_handler(ap); } static int qs_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index a4e552a325b0..bedd5188e5b0 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -921,7 +921,7 @@ static void pdc_error_handler(struct ata_port *ap) if (!(ap->pflags & ATA_PFLAG_FROZEN)) pdc_reset_port(ap); - ata_std_error_handler(ap); + ata_sff_error_handler(ap); } static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/include/linux/libata.h b/include/linux/libata.h index 6888b5c36e0f..1d3859016aec 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1614,7 +1614,6 @@ extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class, extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes); extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); -extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); #ifdef CONFIG_PCI extern int ata_pci_sff_init_host(struct ata_host *host); @@ -1629,6 +1628,8 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev, struct scsi_host_template *sht, void *host_priv, int hflags); #endif /* CONFIG_PCI */ +extern void ata_bmdma_error_handler(struct ata_port *ap); +extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc); extern void ata_bmdma_setup(struct ata_queued_cmd *qc); extern void ata_bmdma_start(struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc);