From: Daniel Mack Date: Tue, 11 Aug 2009 12:39:09 +0000 (+0200) Subject: [ARM] pxa: add MFP_PULL_FLOAT X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=fb60870f630f926d2299b6ebd31fc94714dcd734;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git [ARM] pxa: add MFP_PULL_FLOAT There is currently an uncovered case for MFP configuration on PXAs which is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN bits. This case is needed to explicitly let pins float, even if the selected alternate function would default to a configuration with a pull resistor enabled. Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 64019464c8d..08ad665460b 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -325,8 +325,9 @@ typedef unsigned long mfp_cfg_t; #define MFP_PULL_LOW (0x1 << 21) #define MFP_PULL_HIGH (0x2 << 21) #define MFP_PULL_BOTH (0x3 << 21) -#define MFP_PULL_MASK (0x3 << 21) -#define MFP_PULL(x) (((x) >> 21) & 0x3) +#define MFP_PULL_FLOAT (0x4 << 21) +#define MFP_PULL_MASK (0x7 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x7) #define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ MFP_LPM_EDGE_NONE | MFP_PULL_NONE) diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index e716c622a17..9405d0379c8 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -77,11 +77,13 @@ * MFPR_PULL_LOW 1 0 1 * MFPR_PULL_HIGH 1 1 0 * MFPR_PULL_BOTH 1 1 1 + * MFPR_PULL_FLOAT 1 0 0 */ #define MFPR_PULL_NONE (0) #define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) #define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) #define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) +#define MFPR_PULL_FLOAT (MFPR_PULL_SEL) /* mfp_spin_lock is used to ensure that MFP register configuration * (most likely a read-modify-write operation) is atomic, and that @@ -116,6 +118,7 @@ static const unsigned long mfpr_pull[] = { MFPR_PULL_LOW, MFPR_PULL_HIGH, MFPR_PULL_BOTH, + MFPR_PULL_FLOAT, }; /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */